Used Norma Pipe Clamps 33 Pieces for sale (22,475)

Condition: good (used), Year of construction: 1993, total length: 1,400 mm, total width: 795 mm, total height: 920 mm, Manufacturer: ASQUITH Type: TB-1400 Year of manufacture: 1993 3 matching pieces Weight 2300 kg each Taper fabricated construction Specifications Metric US Standard Number of T slots 5 Up and 5 Down Pitch from T to T 260 mm T-slot dimension 28 mm Number of T-slotted sides 2 Dimensions (Estimate) Length 1400 mm Width 795 mm Height Gijdpowpvd Refx Alxjt 920 mm Weight 2300 kg Please note: The information on this page was obtained by us to the best of our knowledge and, as far as possible, from the manufacturer. The information is provided in good faith, but the accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual conditions. We recommend you check all important details.

Condition: excellent (used), Year of construction: 2004, Total off 12 units available Giodpfxoxxkhys Alxot

Condition: good (used), Year of construction: 1984, Manufacturer: STOLLE Type: STOLLE Year of manufacture: 1980 Specifications Metric US Standard Length 5230 mm Width 2260 mm Height 350 mm Number of T-slots 10+4 T-slot spacing / pitch 10x500mm / 4x565mm mm T-slot size 58 mm Weight per plate approx. 13.5 tons Number of matching pieces 3 Dimensions (approximate) Length 5230 mm Width 2260 mm Height 350 mm Weight Godowp Axnepfx Alxsit 13500 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but the accuracy cannot be guaranteed. Accordingly, no representation or contract terms are implied. We recommend that you verify all important details.

Condition: good (used), overall weight: 2,800 kg, total length: 1,500 mm, total width: 1,000 mm, total height: 900 mm, Manufacturer: CORREA Type: Box Table Year of manufacture: 2006 Gisdowp Dn Dopfx Alxot Specifications Metric US Standard Number of T slots: 8 Pitch from T to T: 150 mm T dimension: 22 mm Number of T-slotted sides: 2 Dimensions (approx. estimate) Length: 1500 mm Width: 1000 mm Height: 900 mm Weight: 2800 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend you verify all important details.

Condition: new, overall weight: 29,000 kg, total length: 7,000 mm, total width: 2,400 mm, plate height: 410 mm, Manufacturer: STOLLE Type: TDV 7/2.4 Gjdswp Dd Espfx Alxeit Year of manufacture: 1990 Specifications Metric US Standard Length 7000 mm Width 2400 mm Height 410 mm Number of T-slots 8 Distance between T-slots / Pitch 300 mm T-slot size 41 mm Weight per plate approx. 29000 tons Number of matching pieces 3 Dimensions (estimate) Length 7000 mm Width 2400 mm Height 420 mm Weight 29000 kg Please note: The information on this page has been provided to the best of our knowledge and belief by us, and, where possible, obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or terms of a contract. We recommend that you check all important details.

Condition: good (used), total length: 4,010 mm, total width: 2,100 mm, plate height: 200 mm, Manufacturer: STOLLE Type: RDG Year of manufacture: 1980 Gedpfjwp Dhdex Alxsit Specifications Metric US Standard Length 4010 mm Width 2000 mm Height 220 mm Number of T-slots 13 T-slot distance / pitch 400 mm T-slot size 35 mm Weight per plate approx. 5.3 tons Dimensions (estimated) Length 4010 mm Width 2100 mm Height 220 mm Weight 5300 kg Please note: The information on this page was provided to the best of our knowledge and, as far as possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representation or contract conditions. We recommend that you check all important details.

Condition: good (used), total length: 5,000 mm, total width: 2,000 mm, plate height: 350 mm, Manufacturer: ASQUITH Type: DRG Year of manufacture: 1980 Specifications Metric US Standard Length 5000 mm Width Gisdowp Eqyspfx Alxet 2000 mm Height 350 mm Number of T-slots 8 Distance between T-slots / step 240 mm T-slot size 35 mm Number of matching pieces 1 Dimensions (estimated) Length 5000 mm Width 2000 mm Height 350 mm Weight 7500 kg Please note: The information on this page was provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, no representation or contractual terms arise from it. We recommend verifying all important details.

Condition: good (used), total length: 3,500 mm, total width: 1,100 mm, plate height: 250 mm, Manufacturer: ASQUITH Year of manufacture: 1990 Specifications Metric US Standard Length 3500 mm Width 1100 mm Giedpswp Hacsfx Alxjt Height 250 mm Number of T-slots 6 + 3 T-slot spacing / jump 365 mm T-slot size 48 mm Weight per plate approx. 2900 kg Number of matching pieces 1 Dimensions (Estimate) Length 3500 mm Width 1100 mm Height 250 mm Weight 2900 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, no representation or contract terms are made. We recommend checking all important details.

Condition: good (used), total length: 6,000 mm, total width: 2,000 mm, plate height: 510 mm, Manufacturer: STOLLE Type: Cast iron Year of manufacture: 1990 Specifications Metric US Standard Length 6000 mm Width 2000 mm Height 510 mm Number of T-slots 8 T-slot spacing / pitch Giodpfx Alewp Hxfoxst 250 mm T-slot size 36 mm Weight per plate approx. 9500 kg Dimensions (estimated) Length 6000 mm Width 2000 mm Height 510 mm Weight 14500 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual conditions. We recommend you verify all critical details. Share on

Condition: used, Year of construction: 2001, total length: 3,300 mm, total width: 800 mm, total height: 3,200 mm, Colour: Grey Empty weight: 1.000 kg Trabo WSB33 Net locking dimensions: 2700*2700mm 6 hydraulic supports in two groups Mobile ladder with guide rail mounted on the bench Dimensions module 980x980 mm Installation angle 70-81° or horizontal Diameter holes 25 mm Gijdpfx Aljwnhldexjt Pitch of the holes 122.5 mm Height stop strip 130 mm - Year: 2001 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 33009012 - Main motor power [kW]: 1.1 - Max. clamping width [mm]: 2700 - Max. clamping depth [mm]: 2690 - Options: Remote control - Transport dimensions: 3300mm x 800mm x 3200mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Colour: Grey Hydraulic Pegboard press Van Duin. Confinement size 4500 * 3000mm 7 cylinders. Transport dimensions: 4500x1300x3510mm (LxBxH), 2000kg. - Documentation available: No - CE certificate present: No - Serial number: 1272595 - Max. clamping width [mm]: 4500 - Max. clamping depth [mm]: 3000 - Number of cylinders [pcs]: 7 Financial information Gijdpfx Alownhd Tsxst VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Colour: Grey Hydraulic Pegboard press Van Duin. Giodpfswng Htex Alxot Confinement size 4000 * 2500mm 5 cylinders Transport dimensions: 4550x1300x3030mmm (LxBxH), 2000kg. - Documentation available: No - CE certificate present: No - Max. clamping width [mm]: 4000 - Max. clamping height [mm]: 2500 - Number of cylinders [pcs]: 5 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: with T-slot, solid design -Groove width: 10 mm -Dimensions: see photos / technical drawing -Dimensions: 230/155/H365 mm Gijdpfx Ajwuzr Dslxst -Weight: 14.7 kg

Condition: used, Hydro-mechanical NC machine vice, VIS - HYDRAULIQUE\nPrecision machine vice, clamp\nType 20700\nYear of manufacture approx. 2000\nJaw width 150 mm\nJaw height 42 mm\nClamping range 0 to 250 mm\nMax. opening width 253 mm\nClamping force 6 tons\nGuideway height 51 mm\nGuideway length 450 mm\n- Hydro-mechanical machine vice\n- Quick adjustment with clamping ball lock in 8-position hole grid\n- Rigid base body, precision ground on all sides\n- Can be clamped horizontally, vertically, or laterally\n- Guideway with 19 mm guide slot\n- Additional set of prism jaws included\nDimensions (L x W x H): 480 x 150 x 107 mm\nWeight: 32 kg\nGood condition Gedpfxey Sbxfs Alxoit

Condition: used, mileage: 70,000 km, power: 310 kW (421.48 HP), first registration: 03/2015, fuel type: diesel, empty load weight: 12,000 kg, maximum load weight: 14,000 kg, overall weight: 26,000 kg, axle configuration: 6x4, wheelbase: 3,600 mm, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, Equipment: ABS, air conditioning, cabin, central locking, cruise control, differential lock, fog lights, onboard computer, parking heater, power assisted steering, seat heater, traction control, Vehicle location: Bovenden. Equipped with Mercedes PowerShift 3, central locking, 1x comfort seat, seat heating, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, auxiliary heater, ABS (anti-lock braking system), traction control system (ASR), retarder, PTO (power take-off), elevated exhaust, differential lock, fog lights, leaf suspension, side aluminium underrun protection, roof hatch, green emissions sticker. Gsdjvhi S Hepfx Alxoit Wheelbase: 3,600 mm. Body: fitted with a used 20t hooklift system, 8t front axle, rear axle with 300 planetary ring gear, 13.4t. Electronic brake system with ABS and ASR, switchable ABS, disc brakes with full protection front and rear axle, secondary water retarder, condensate monitoring for compressed air system, front axle stabilizer, residual heat utilization, additional hot water heater, construction site filter, additional thermal insulation, PSM, reversing warning system, CompactSpace, comfort central locking system, off-road driving program, Mercedes PowerShift 3, daytime running lights, underride protection plate below bumper, gearbox oil cooling, tank capacity: 290l, PTO MB 131-2c for pump, engine power take-off rear with 120mm flange, 900Nm. The price is net plus 7,000 EUR for installation of the hooklift system! Optional: also available with new Hyva 20-49 hooklift system for an additional 9,000 EUR! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted.

Condition: used, axle configuration: 3 axles, first registration: 09/2015, color: other, Year of construction: 2015, Empty weight: 6.860 kg Gjdpfxey Nzrts Alxeit Axle 1: left 8 mm right 8 mm Axle 2: left 8 mm right 8 mm Axle 3: left 8 mm right8 mm

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, turning diameter over cross slide: 630 mm, spindle bore: 320 mm, turning diameter: 1,200 mm, turning diameter over bed slide: 930 mm, turning length: 3,000 mm, Lathe in very good technical condition, has seen very little use and was not used for machining pipes. The Poręba TPL 90/3m lathe (also listed in market nomenclature as a variant of the TPK 90 series) is a textbook example of an Oil Country Lathe / Hollow Spindle Lathe. This model fulfills all the specific criteria for machines intended for the Oil & Gas sector: • Massive spindle bore (Big Bore): This version features a spindle bore with a diameter of 320 mm (approx. 12.5 inches), allowing for easy insertion of thick-walled drill and casing pipes. • Dual chucking system: The headstock is designed for mounting two independent lathe chucks (front and rear, typically 28 inches in diameter), ensuring the pipe is clamped and stabilized at both ends of the spindle. • Optimal working dimensions: The 3m designation defines a turning length between centers of 3000 mm, which, combined with a swing over bed of 930 mm (hence the "90" in the name), allows for machining heavy-duty pipeline components. • Exceptional rigidity: FUM POREBA factory machines are renowned for their monolithic, very wide and heavy cast iron beds, which effectively dampen the immense vibrations generated during taper thread cutting. In international used machinery catalogues, this specific Poręba model is directly classified under the Oil Field Lathes category. TECHNICAL SPECIFICATIONS: Geometric parameters and machining ranges Giodpfx Aey Sf Azelxst • Swing over bed: 930 mm / 36.6 in • Swing over cross slide: 630 mm / 24.8 in • Swing in gap: 1200 mm / 47.2 in • Maximum turning length between centers: 3000 mm / 120 in • Bed width: 585 mm / 23.0 in Headstock • Spindle bore diameter (Hollow Spindle): 320 mm / 12.6 in (in US nomenclature classified as a 12.5" version) • Spindle speed range: 5 – 250 rpm, or modified versions up to 710 rpm • Number of spindle speed steps: 18 Feed and thread cutting system • Longitudinal feed range: 0.1 – 12.8 mm/rev / 0.004 – 0.504 in/rev • Cross feed range: 0.05 – 6.4 mm/rev / 0.002 – 0.252 in/rev • Types of threads cut: Metric, Inch (Whitworth), Module, Diametral Pitch (DP) Tailstock • Tailstock quill diameter: 130 mm / 5.1 in • Tailstock quill travel: 300 mm / 11.8 in • Internal taper of quill: Morse No. 6 (MT6) Drive and dimensions • Main motor power: 22 kW / 29.5 HP • Overall length: approx. 5500 mm / 216.5 in • Overall width: approx. 1750 mm / 68.9 in • Overall height: approx. 1500 mm / 59.0 in • Total weight: approx. 8000 kg / 17,630 lbs

Condition: used, Year of construction: 1994, CNC press brake Manufacturer: Blemas Model: 100-33 Year of manufacture: 1994 CNC control: Cybelec DNC 74 PSG Giedpfx Alsyvfklexot Pressing force: 100 t Working width: 3 m Weight approx.: 8 t Dimensions approx.: 3,600 x 1,600 x 2,600 mm

Condition: ready for operation (used), functionality: unexamined, machine/vehicle number: Pro Coil E-18/9, Thermaflex ThermaSmart PRO Coil E-18/9, thermal pipe insulation in box. Godpfx Aew Hzu Aelxsit Lot of 65 boxes. Diameter: 18mm Thickness: 9mm Length: 23m

Condition: excellent (used), axle configuration: > 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, total length: 16,470 mm, total width: 2,750 mm, total height: 1,250 mm, suspension: air, tire size: 235/75 R17.5, color: grey, Year of construction: 2003, Colour: Grey Payload weight: 32,540 kg Details: Manufacturer: Goldhofer Type: STZ-L4-33/80 Chassis no.: WG0STZL4530027413 Year of manufacture: 2003 Weights: Kingpin load: 17,500 kg Axle load: 10,000 kg Total axle load: 40,000 kg Gross Vehicle Weight (GVW): 57,500 kg Empty weight: 24,960 kg Loading capacity: 32,540 kg Axles: Axle brand: Gigant Air suspension All axles with hydraulic steering Raise/lower valve ABS Tyres: 235 / 75 R17.5 twin mounted Load index: 143/141J Dimensions: Length: 16,470 mm Extensions: 8,740 mm + 8,635 mm + 8,535 mm Max. extended length: 42,380 mm Loading platform width: 2,750 mm Loading platform height: 1,025 mm (+100 / –165 mm) Kingpin height: +/- 1,250 mm Additional features: NATO plug Lashing rings Stake pockets Hydraulically operated gooseneck Wooden loading platform Mechanical landing gear Toolbox Electro-hydraulic pump for trailer functions Spare wheel holder 3.5'' kingpin Central lubrication with 2 pumps Radio remote control = Further Information = General Information Year of manufacture: 2003 Axle configuration Tyre size: 235/75 R17.5 Axle brand: Gigant Suspension: Air suspension Rear axle 1: Twin tyres; Lift axle; Max. axle load: 10,000 kg; Steerable Rear axle 2: Twin tyres; Max. axle load: 10,000 kg; Steerable Rear axle 3: Twin tyres; Max. axle load: 10,000 kg; Steerable Rear axle 4: Twin tyres; Max. axle load: 10,000 kg; Steerable Weights Empty weight: 24,960 kg Payload: 32,540 kg Gross vehicle weight: 57,500 kg Functional Loading platform height: 102 cm Extendable chassis: Yes Condition Technical condition: very good Visual condition: very good Financial Information Price: On request Further information Please contact Stefan Schaapveld for further information. Gjdpfxoyrzblj Alxeit

Condition: ready for operation (used), Year of construction: 2007, Brand: Sorbini Model: VS/33-ACT-F Machine no.: MP1SCO27052 Year of manufacture: 2007 Giedpfxoxtal De Alxot Compressed pneumatic air Pneumatic propellers Motor: 1.6 kW Weight: 1150 kg Stock no.: 2002709BXA

Condition: good (used), Strapping machine, packaging machine, strapping machine, carton stapler, stapling pliers, pliers stapler -Tensioning pliers: sealing device for strapping -for staples: approx. 16 mm width Gijdpfx Asi E Af Rolxjt -Dimensions: 450/100/H110 -Total weight: 2.9 kg

Condition: excellent (used), Year of construction: 2000, For sale is a Höcker Polytechnik Vacumobil system. The unit is fully functional and can be inspected and tested on site. The sale is carried out on behalf of a customer. Machine location: Friedeburg region. Machine details: - Year of manufacture: 2000 Godpoylciwjfx Alxjit - Extraction diameter: 300 mm - Motor power: 7.5 kW - Nominal air flow rate: 5320 m3/h - Mobile on castors Price is net, plus VAT. An invoice for the machine will be issued. Shipping of the machine can be arranged at additional cost. Feel free to contact us with any questions or if you are interested! Your JG Holztechnik Team from 26188 Edewecht.

Condition: good (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: R009060-01, travel distance X-axis: 3,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,600 mm, overall weight: 36 kg, type of input current: three-phase, input voltage: 400 V, controller model: Touch 2, maximum load weight: 15 kg, Equipment: documentation/manual, For sale: SEPRO Success 33 linear robot. The robot was in use until recently for the removal of plastic parts on an injection moulding machine. Further specifications: Maximum handling weight: 15 kg Control: Touch 2 Interface: Euromap 67 Vacuum-pneumatic gripping functions: 4 including digital vacuum switch Pneumatic gripping functions: 4 Conveyor cycle: inside control cabinet Maintenance by plasma Kunststofftechnik is currently up to date. Horizontal traverse stroke - X: Stroke/maximum travel [mm]: 3000, optionally longer Drive: Servo motor Max. travel speed [mm/s]: 1700 Intermediate stop: CNC position measurement system Gsdsy Rz H Hepfx Alxoit Demoulding stroke - Y: Stroke range [mm]: 900 Drive: Servo motor Max. travel speed [mm/s]: 2000 Intermediate stop: CNC position measurement system Vertical stroke - Z direct arm: Stroke/maximum travel [mm]: 1600 Drive: Servo motor Max. travel speed [mm/s]: 3000 Intermediate stop: CNC position measurement system Rotational axes: Rotary axis R1 pneumatic 0° - 90° Rotary axis R2 S5-35 for payload 15 kg with intermediate stop at 90° -> This rotary axis is integrated into rotation 1, allowing rotation about the horizontal or vertical axis depending on the position of the first rotation. Rotation angles: 0° - 90° and 180°.

Condition: new, Year of construction: 2025, load capacity: 1,800 kg, lifting height: 5,400 mm, fuel type: electric, mast type: triplex, construction height: 2,420 mm, fork length: 1,200 mm, empty load weight: 3,370 kg, FRIEDMANN FORKLIFTS – EXPERTLY REFURBISHED FOR PROFESSIONALS IN ACTION Our forklifts are fully refurbished to FEM-4.004 and the latest safety standards – ensuring the highest quality and your safety. From the chassis to the battery, including drivetrain, brakes, steering, and electrics – every vehicle undergoes thorough inspection and reconditioning. ✔ Made in Germany – with precision and responsibility ✔ Rigorous technical inspection ✔ 400+ vehicles in stock ✔ Worldwide shipping & customs handling ✔ Service & spare parts at fair prices ✔ Personal support – even after purchase Test on site now and get expert advice – we’ll find the right solution for you. Industrial Truck Specifications: • Manufacturer: Heli • Model: Counterbalance Forklift CPD18 • Drive type: Electric • Rated capacity: 1,800 kg • Year of manufacture: 2025 • Operating hours: 0 • Lift height: 5,400 mm • Mast type: Triplex • Full free lift: Yes • Overall width: 1,120 mm • Overall height: 2,420 mm • Fork length: 1,200 mm • Unladen weight: 3,370 kg • Tyres: Solid rubber • Model type: CPD18 • Battery type: Lithium-ion • Battery weight: 246 kg • Lights: 2x front work lights • Lights: Rotating beacon • Lights: BlueSpot rear safety light • Lights: Road package – equipment for limited on-road use: indicator, tail light, reversing spotlight, reflector, etc. • Attachment: Sideshift • Attachment: Additional hydraulic circuit – routed to the carriage Gedpfx Aey Rpa Uolxsit