Used Objet / Stratasys 3D Printer Multi-Material for sale (31,026)

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 12,655 h, type of input current: three-phase, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, laser power: 70 W, EOS P396 laser sintering system, built 2017, 12,655 laser hours. The machine is operational and located in the Netherlands, available immediately. Laodpfjz A Sycsx Ahaoh It last produced a full validation build in April 2026. Photos and video of that build are available on request, and the parts speak for themselves. Included in the sale EOS P396 machine with switchgear cabinet 2x exchangeable build frames Laser chiller (air/water) PA2200 Balance material licence Touchscreen control terminal Lenovo P3 Ultra workstation, Intel Core Ultra 9, 32 GB, Windows 11, installed 2025 Technical Process: SLS, polyamide Laser: 70 W CO2 Build volume: 340 x 340 x 600 mm Software: PSW 3.8 Supply: 400 V, three phase Condition The original control PC failed in 2025 and was replaced with a new Windows 11 workstation, so the control side of this machine has years left in it. It currently runs a touchscreen; the original EOS console and monitor are in storage and can be supplied instead if you prefer the factory configuration. The machine has been maintained throughout its life by EOS and by our own technicians. At the last annual EOS service the laser measured 68.1 W on a 70 W laser, with beam alignment and calibration confirmed. Full EOS service documentation is available to serious buyers. Terms Sold as-is, where-is, ex works. Buyer arranges rigging, crating, transport and insurance. Payment in full before collection. Viewing The machine is in storage and can be viewed by appointment. If you want to see it running, we can recommission it at our facility in Utrecht by arrangement.

Condition: excellent (used), Year of construction: 1998, Engel ES 650W500V/200HL. 2F 2-component machine  Tie-barless  2000 kN clamping force Ledpfx Ahegrafvjasah  Screw diameter, aggregate 1: 45 mm, aggregate 2: 45 mm  Max. injection volume, aggregate 1: 226 cm³, aggregate 2: 183 cm³  Installation dimensions, mold: min 250 mm, max 750 mm  Year of manufacture: 1998

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 21450012211002129, Year of construction: 2024, operating hours: 2,262 h, construction height: 200 mm, construction width: 270 mm, working length: 330 mm, Equipment: CE marking, Hardly used showroom machine with very few operating hours! TECHNICAL DETAILS Build volume: 330 mm x 270 mm x 200 mm Layer height: from 50 µm Precision X, Y: 150 µm MACHINE DETAILS Technology: FFF + CFR (Continuous Fiber Reinforcement) Compatible materials: Onyx, Onyx FR, Onyx ESD, Nylon White, Carbon fiber, Glass fiber, Kevlar, HSHT Operating hours: 2,262 h Laodpfsxu E Srsx Ahaeh EQUIPMENT Eiger software (cloud and local) Connections: Ethernet, Wi-Fi, USB Material dry box for safe storage Continuous fiber reinforcement: carbon fiber, glass fiber, Kevlar Enclosed build area for optimal thermal stability High-resolution optical encoders Prepared for Blacksmith (automatic dimensional calibration) Certificates: CE, FCC, UL, UKCA

Condition: reconditioned (used), For Sale: EOS M400 – High-Performance Metal 3D Printer This EOS M400, is a cutting-edge metal additive manufacturing system located at the customer’s site. It is equipped with a 1kW laser, ensuring high precision and productivity for large-scale industrial applications. Specifications: • Laser Power: 1kW • Technology: Direct Metal Laser Sintering (DMLS) Compatible Materials: This system supports a wide range of materials, making it ideal for diverse applications across industries such as aerospace, automotive, and medical. Compatible materials include: • Nickel-based alloys: IN718_1, HX-1, IN625_1, IN939_1 • Aluminum alloys: AlF357_1, AlSiMg_1 • Copper alloys: CuCrZr_1, Cu_1 • Stainless steels: GP1_1, PH1_1 Ljdpfevq Sm Ejx Ahaoah • Tool steels: MS1_1, SP2_1 • Titanium alloys: Ti64_1, Ti64ELI_1, Ti64Grade23_1, TiGrade5_1, TiCP_1 • Custom gas options: CustomAr, CustomN2 • Cobalt chrome: MP1_1 Why Choose the EOS M400? • Large build volume for industrial-scale production. • High laser power for enhanced speed and precision. • Wide material compatibility for versatile applications. Services Included: • Transport & Installation Support: We can arrange safe relocation and installation at your facility. • Expert Maintenance Plans: Flexible plans to keep your machine in peak condition. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we specialize in providing high-quality refurbished EOS additive manufacturing machines with comprehensive support. As the only provider offering a complete solution for used EOS equipment, we ensure reliable machines, tailored services, and premium materials for your production needs. What we offer: • Expert service: Installation, servicing, and upgrades performed by skilled ex-EOS technicians. • Exclusive materials: High-quality consumables tested and optimized for EOS systems. • End-to-end support: From transport to tailored maintenance plans, we handle every detail. Trust IM3D to help you scale your metal additive manufacturing capabilities with confidence. Contact us for more information or inquiries!

Condition: good (used), mileage: 112,419 km, power: 125 kW (169.95 HP), first registration: 10/2024, fuel type: diesel, tire size: 235/65R16, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 3, total length: 7,150 mm, total width: 2,020 mm, total height: 2,700 mm, loading space length: 4,360 mm, loading space width: 1,780 mm, loading space height: 1,920 mm, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, seat heater, traction control, = Additional Options and Accessories = - Heated mirrors - None - LED lamp - Manual - Radio/cassette Ledpfx Ahe Aaxcxeasah - Rear view camera - Lane keeping assist - Fabric - Blind spot sensor - Partition = Notes = Number of axles: 2, Configuration: 4x2, Payload: 1315 kg, Tare weight: 2185 kg, Gross vehicle weight: 3500 kg, Trailer load, unbraked: 750 kg, Trailer load, center axle, braked: 2000 kg, Type of cab: Single cab, Cruise control, Air conditioning, Number of airbags: 2, Parking assist: Front and rear, Electric windows, Electric mirrors, Partition, Radio/cassette, GPS navigation, Color: White, Heated mirrors, Rear view camera, Type of lighting: LED lamp, Lane keeping assist, Air conditioning, Seat heating, Bluetooth, Blind spot sensor, Engine power: 125 kW (168 Hp), Number of cylinders: 4, Displacement: 1950 cc, Fuel: Diesel, Euro: 6, Drive technology: Timing chain, Type of transmission: Automatic, Power steering, ABS, ASR, Starter battery, Side wall paneling, Rear step, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Number of seats: 3, Seat arrangement: 1+2, Seat cover: Fabric, Seat adjustment: Manual, L3H2 | Automatic | LED | Camera | MBUX10 | PDC | Air conditioning |, Tire type: All-season tires = Additional Information = General Information Number of doors: 1 License plate: V-32-RJZ Axle Configuration Tire size: 235/65R16 Brakes: Disc brakes Suspension: Leaf spring suspension Axle 1: Tire tread depth left: 3 mm; Tire tread depth right: 9 mm Axle 2: Tire tread depth left: 2 mm; Tire tread depth right: 1 mm Weights Unladen weight: 2,185 kg Payload: 1,315 kg GVWR: 3,500 kg Functional Loading area height: 63 cm Maintenance APK (Technical Inspection): valid until 10.2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial Information Leasing price: 560 € per month (delivery van, 72 months); Please inquire for more information and terms.

Condition: excellent (used), Printing process: Polymerization of a photosensitive resin in successive layers. Laodpfez Rmipox Ahaoh Light source: UV Resin system: Resin vat for photosensitive resin Build platform: 330 x 400 mm Build platform material: Marble Recoater: Present UV head: 1 x UV head Axes: X, Y, Z, V, and R axes V-axis: Lifting system for resin vat Z-axis: Build platform R-axis: Recoater system Counterweight: Present

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, operating hours: 200 h, total length: 1,590 mm, total height: 2,130 mm, total width: 1,610 mm, type of input current: AC, input voltage: 230 V, input current: 30 A, travel speed (max.): 6,000 mm/min, space requirement length: 2,000 mm, space requirement height: 2,500 mm, space requirement width: 3,800 mm, Array – Your Solution for Industrial 3D Printing Production Lodsxl Ry Ajpfx Ahaoah Array is a scalable platform for additive manufacturing, designed for the production of end-use polymer parts directly on your shop floor. Featuring integrated robotics, intelligent software, and high-performance FFF printing, Array reduces labor costs, increases productivity, and delivers series-quality components—on-site and exactly when you need them. Your benefits: Efficient & Cost-saving: Automated processes reduce personnel costs Fast & Flexible: High throughput for your production Industrial Quality: End products in series quality, available immediately Act now: Discover our pre-owned Array systems—inspected, reliable, and offered at attractive prices. ✅ Request your quote now ✅ Immediately available—fast delivery

Year of construction: 2007, condition: ready for operation (used), A 3D metal printing machine Concept Laser GmbH in need of repair is available. Technology: Laser melting (SLM)/LaserCusing, working dimensions X/Y/Z: 250mm/250mm/280mm, layer thickness range: 20µm-80µm, max. scanning speed: 6m/s, focus diameter range: 50µm-500µm, laser power: 200W, printing materials: stainless steel/aluminum/titanium/nickel-based alloys/cobalt-chrome. Machine dimensions X/Y/Z: approx. 2450mm/2400mm/1650mm, weight: approx. 2000kg, laser cabinet dimensions X/Y/Z: approx. 600mm/1200mm/1200mm, weight: approx. 180kg, blower dimensions X/Y/Z: approx. 550mm/1450mm/550mm, weight: approx. 70kg. Including various printing materials such as titanium plates, steel plates and aluminum alloys. The machine has CF card defects and the communication between laser GUI and RCU breaks down. Documentation available. On-site inspection is possible. Lodpfx Ahsww Ivneaeah

Condition: ready for operation (used), Year of construction: 2015, Measuring dimensions X/Y/Z: 400mm/300mm/200mm, measuring accuracy: 2.9+L/100µm, max. workpiece weight: approx. 30kg, machine dimensions X/Y/Z: approx. 1250mm/950mm/1700mm, weight: approx. 900kg. Documentation available. An on-site inspection is possible. Laedey R Dr Espfx Ahaoh

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: SLM250182820, Year of construction: 2018, total length: 110 mm, total width: 100 mm, laser power: 250 W, laser wavelength: 1,070 nm, type of cooling: air, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser System Laser type: Fiber laser Laser power: 250 W Wavelength: 1,070 nm Spot size: 40 µm Cooling: Air cooling Lasdpfxoy Sm D Hs Ahajh Process Chamber Process atmosphere: Low-oxygen environment Shielding gas: Argon / Nitrogen Max. extraction system flow rate: 190 m³/h Coating System Coater: Precision coater with rotary guide Coating blade: Steel, rubber, or brush system Micrometer screws: For optical alignment of the coater MACHINE DETAILS Printing Process: SLM (Selective Laser Melting) process Operation Control model: 12" Microsoft Surface Pro 3 tablet Control type: Tablet-based control and monitoring Build Volume and Powder Reservoir Build volume: 100 mm x 110 mm Reservoir volume: 110 mm x 200 mm EQUIPMENT Integrated extraction system Cartridge system for quick and safe metal powder replacement Monitoring and adjustment of process parameters Cloud manufacturing technology Accessories as shown in the images

Condition: good (used), functionality: fully functional, Technology: Selective Laser Sintering Build Volume: 230 x 230 x 250 mm (9.0 x 9.0 x 9.8 inch) Laser Performance: 60W Fiberlaser (CO2) Layer Thickness: 0.06 / 0.08 / 0.1 / 0.15 / 0.2 / 0.3 mm Max. Build Speed: Up to 22 mm / hour (Geometry dependent) Accuracy: 0.2mm Full Parameter Access: Yes Lasdpfx Ahswcyzajaeh Printer Dimensions: 148 x 85 x 204 cm (58.3 x 33.5 x 80.3 in)

Condition: like new (used), For Sale: Complete EOS P110 Setup – Ready for Immediate Use This fully inspected and revised EOS P110 is in outstanding condition, as seen in the photos—it looks practically new! This setup is ready for immediate use and ideal for expanding or starting your SLS production line. Included in the package: • 2 Build frames • Set of hoppers • Unpacking station with sieve • Material mixer Specifications: • Technology: SLS (Selective Laser Sintering) • Material class: Polymers • Compatible materials: PA2200, PA3200, PA2201, Inframotion PA12, TPU, and more. • Construction volume: 200 x 250 x 330 mm • Laser type: Coherent CO2 laser • Minimum wall thickness: 0.4 mm Consumables Highlight We offer plug-and-play materials, fully tested and optimized for use with EOS machines. Our exclusive Inframotion PA12 material is designed to match or exceed the performance of OEM powders while offering significant cost savings. By switching to our materials, you can lower your production costs without sacrificing quality. Services Included: Ledpfx Ajryvilehaoah • Transport & Installation: We ensure safe delivery in original EOS packaging and professional installation. • Warranty & Maintenance Plans: Flexible options tailored to your needs, ensuring long-term reliability and peace of mind. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we are the industry leader in providing top-tier refurbished EOS SLS machines with comprehensive support services. As the only provider offering end-to-end solutions for used EOS equipment, we pride ourselves on unmatched expertise and reliability. What we offer: • Expert service: Installation, maintenance, repairs, and upgrades performed by experienced ex-EOS technicians. • Exclusive materials: Cost-saving, high-quality consumables like our plug-and-play PA12, designed specifically for EOS systems. • Unparalleled support: From transport to maintenance plans, we handle it all. Trust IM3D for high-performance machines, superior materials, and the expertise to keep your SLS production running smoothly. For more information or inquiries, feel free to reach out!

Condition: used, Equipped with two independent extruders, build volume: 260x350x340mm, standard nozzle: 0.4mm, interchangeable, additional sizes optional, layer thickness: 0.05-0.6mm, software compatibility: Simplify3D, Cura, Slic3r, file formats: STL, OBJ, G-code, print bed: heated glass/metal platform, temperatures: extruder up to 260°C/heated bed up to 120°C, power supply: 230V, 50/60Hz, length: 840mm, width: 750mm, height: 1,020mm, weight: approx. 400kg, total operating time: 131 days, 17h, 25min, 7s, longest print job: 2 days, 14h, 6min, 35s, filament consumption: 19,912.05m. On-site inspection is possible. Laedjz R Uxmspfx Ahajh

Condition: refurbished (used), For Sale: Refurbished EOS M290 – Ready to Use This fully inspected and refurbished EOS M290 is in excellent condition! This setup is ready to use and ideal for expanding or starting a DMLS production line. Specifications: • Technology: DMLS (Direct Metal Laser Sintering) • Material Type: Metal • Compatible Materials: On Request • Build Volume: 250 x 250 x 325 mm • Laser Type: Yb-fiber laser; 1 x 400 W Lasdpfswmq Dyox Ahaeh Consumables Featured We offer plug-and-play materials, fully tested and optimized for use with EOS machines. Our exclusive Inframotion PA12 is designed to perform at or above OEM powder levels, while significantly reducing costs. By switching to our materials, you will reduce your production costs without compromising on quality. Included Services: • Transport & Installation: We ensure safe delivery in original EOS packaging and professional installation. • Warranty & Maintenance Plans: Flexible options to fit your needs, for long-term reliability and peace of mind. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we are the market leader in high-quality remanufactured EOS SLS and DMLS machines with comprehensive support services. We are the only provider to offer end-to-end solutions for used EOS equipment, with unmatched expertise and reliability. What we offer: • Expert maintenance: Installation, maintenance, repairs and upgrades performed by experienced ex-EOS technicians. • Exclusive materials: Cost-effective, high-quality consumables such as our plug-and-play PA12, specifically designed for EOS systems. • Unmatched support: From transportation to maintenance plans, we have it all covered. Trust IM3D for top performance, superior materials and the expertise to keep your SLS and DMLS production running smoothly. Please feel free to contact us for more information or questions!

Condition: used, machine/vehicle number: FPR4012012202007256, Year of construction: 2022, total length: 800 mm, total height: 450 mm, total width: 600 mm, overall weight: 30 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Onyx filament: 800 cm3 Fiberglass filament: 50 cm3 MACHINE DETAILS Lajdpfx Aszwn Tdjhaoh Dimensions & Weight Transport dimensions: approx. 800 × 600 × 450 mm Transport weight: approx. 30 kg EQUIPMENT Markforged EIGER Software Cloud Online Version Markforged EIGER Software Desktop Online Version Early access to new features 3 × FFF quick-change nozzle 3 × CFF quick-change nozzle Markforged Drybox for material storage The height and weight of the item must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and day (or part thereof) will be charged. This fee must be paid before collection. The sale is made without any warranty or guarantee. The information on the technical data is based on the original offer. No liability is accepted for printing and measurement errors. In case of doubt, please compare the information with the provided photos or inspect the item on site before the end of the auction.

Condition: used, EOS Type: P390 Eosint P 390 – Laser Sintering System (SLS) Operating hours: 6735 h For sale is an industrial laser sintering system from EOS, model P 390. It is suitable for additive manufacturing (SLS – Selective Laser Sintering) of plastic components on an industrial scale. Base machine with control cabinet & control terminal Exchange frame with build platform The Multibox is a typical accessory for powder handling in EOS systems. It is used for the transport and temporary storage of the material. Technical data: Build volume: approx. 340 × 340 × 620 mm (X × Y × Z) Lsdpfxezimhqj Ahaoah Minimum layer thickness: 0.1 mm (variance < 0.05 mm) Powder container capacity: 2 × 45 liters with fluidization and dispenser Heating: Infrared, 3.2 kW Nitrogen generator: integrated, purity > 99% Electrical supply: 400 V ±6/–10 %, 50 Hz, 3 × 32 A, energy consumption approx. 2 kW Extraction: 20 m³/h at 6 bar, DN 100 Cooling: 5.7 l/min at 18–20 °C (± 0.1 °C) Dimensions & weight: Machine (W × D × H): approx. 1230 × 1175 × 2100 mm Control cabinet: 610 × 790 × 2100 mm Control terminal: 950 × 700 × 1550 mm SMC HRS024-AN-20-T Thermo-Chiller – Air-cooled – High-pressure pump Technical data Model: HRS024-AN-20-T Cooling capacity: approx. 2.1–2.4 kW Temperature range: 5 °C to 40 °C Temperature stability: ± 0.1 °C Cooling type: Air-cooled Pump: High-pressure pump ("T" version) Flow rate: up to approx. 14 l/min Tank volume: approx. 5 liters Medium: Water or water-glycol Connection: NPT version ("AN") Supply: 200–230 V AC, 1-phase Refrigerant: R407C Weight: approx. 1110 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, clamping force: 1,961 kN, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 200 t Tie bar spacing: 560 x 560 mm Screw diameter (first component): 60 mm Lajdsy Exdljpfx Ahaeh Screw diameter (second component): 35 mm Shot weight (first component): 566 g Shot weight (second component): 178 g EQUIPMENT Two-component system Kraussmaffei Multinject system Note: When purchasing multiple items from the same location (see listings below), the lower costs for dismantling and loading will be waived.

Condition: used, Year of construction: 2022, total length: 400 mm, total height: 450 mm, total width: 400 mm, overall weight: 20 kg, No minimum price – guaranteed sale to the highest bidder! MACHINE DETAILS Dimensions & Weight Lsdpfx Aszwn Tkjhajah Dimensions (L x W x H): 400 x 400 x 450 mm Weight: approx. 20 kg The height and weight of the item must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and for each day or part thereof will be charged. The fee must be paid before collection. The sale is made without any guarantee or warranty. The technical data provided is based on the original offer. No liability is assumed for typographical or measurement errors. If in doubt, please compare the information with the provided photos or inspect the item on site before the auction ends.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, clamping force: 1,225 kN, controller model: CC100, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 125 t Horizontal cylinder: 35 Vertical cylinder: 18 MACHINE DETAILS Control: CC100 EQUIPMENT 1x hydraulic core pull BAP 1x proportional hydraulic interface for index plate BAP 16x heating zones (HK) 2x magnetic clamping plates for BAP and FAP Lsdpfx Ajy Exc Ishaeah Note: When purchasing multiple items from the same location (see offers below), you will benefit from the lowest costs for dismantling and loading.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, screw diameter: 45 mm, clamping force: 2,000 kN, No reserve price – guaranteed sale to the highest bidder!\n\nTECHNICAL DETAILS\n\nClamping unit: 2,000 kN\n\nScrew diameter unit 1: 45 mm\nScrew diameter unit 2: 45 mm\n\nMax. shot volume unit 1: 226 cm³\nMax. shot volume unit 2: 183 cm³\n\nMACHINE DETAILS\n\nMinimum mould installation size: 250 mm\nMaximum mould installation size: 750 mm\n\nEQUIPMENT\n2-component machine\nTie-bar-less design\n\nNote: When purchasing multiple items from the same location (see offers below), you will benefit from the most favourable disassembly and loading costs for each item. Lodpfoy Exatjx Ahasah

Year of construction: 2010, condition: repair required (used), functionality: limited functionality, controller model: MTT AutoFab, inner dimension height: 250 mm, laser power: 400 W, machine/vehicle number: SLM2501004, laser type: fiber laser, Equipment: dust extraction, No reserve price – guaranteed sale to the highest bidder! Note: The machine is in visually clean condition. It is also technically complete and the laser has been replaced by the manufacturer. However, the printer has limited functionality with regard to focus quality at the edge areas, which is presumably due to the optics and therefore requires adjustment or repair. TECHNICAL DETAILS Process: Selective Laser Melting (metal 3D printing) Laser: IPG fiber laser (replaced by manufacturer) Laser power: 200 W Total power: 400 W Maximum power: 900 W Adjustable output power: 10 - 105 % Long-term output stability: ± 3 % Beam quality: < 1.1 M² Wavelength: 1,075 ± 5 nm Spectral linewidth FWHM: < 3 nm Maximum modulation frequency: 50 kHz Build height: 250 mm Shielding gas operation: Argon/inert gas Cooling: water-cooled Cooling temperature: < 30 °C MACHINE DETAILS Laser type: YLR-200-WC Electrical voltage: 85 / 240 V AC Current: 15 A Laser hours: 0.1 h Pump runtime: 2,644 h Power-on hours: 5,017 h Heating power: 1,000 W Nominal temperature: 18 - 30 °C Air pressure: 6 bar Lajdpjy H Hxysfx Ahash Ambient temperature: 0 - 45 °C Dimensions & Weight Dimensions (W x D x H): 3U 19" rack Machine weight: 60 kg EQUIPMENT • Powder System PSH 100 • Extraction and filtration system • Chiller unit • 5x powder bottles (5 L) • 6x substrate plates • 10x filter elements (H13) • 26x wiper lips • Spare sieves • Protective suits • Cleaning wipes for optics (F-theta) • Various small parts & spare components

Condition: new, functionality: fully functional, Year of construction: 2026, total length: 3,000 mm, total height: 2,000 mm, warranty duration: 12 months, I offer a robotic 3D printer with an extruder from the manufacturer Cead and CNC control Siemens Sinumerik One - a solution for large-format printing of molds, design elements, boats, molds for lamination and much more. The machine is made in the Czech Republic and is offered including integration at the customer's site and training. Lodpfxewgkqto Ahaeah Main features: Printing system: Extruder CEAD E25 (up to 12kg/h) or S25 (up to 24kg/h) - selection according to customer requirements Robotic arm: COMAU N-170 with a reach of 3 meters and a load capacity of 160 kg Control system: Siemens SINUMERIK ONE - full CNC control, the possibility of debugging the technology using override. Software Compatibility: ADAXIS, AiBuild, RhinoCAM, Siemens NX, and other CAD/CAM platforms Condition: New machine Optional accessories: Heated print bed to optimize adhesion and print quality Note: Software and print bed are not included in the standard offer, they can be supplied as optional accessories. The price listed is with the basic Cead E25 extruder

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 28.22.0079, Year of construction: 2022, operating hours: 6,700 h, overall weight: 1,870 kg, laser power: 700 W, operating pressure: 8 bar, inner dimension height: 365 mm, inner dimension length: 280 mm, No minimum price – guaranteed sale to the highest bidder! The system has been serviced annually by SLM Solutions. Service reports and machine assessment are available upon request. The system includes the “SLM280 2.0 complete material change kit incl. PSM100” and a second set of filter housings, minimizing the effort required to switch between two materials. TECHNICAL DETAILS Laser power: up to 700 W Materials: suitable for all common materials in the SLM process Temperature range: 20–25 °C Relative humidity: max. 60 % Floor unevenness: max. 5 mm/m² Floor load capacity: min. 2,200 kN/m² Floor surface: antistatic, solvent-resistant, impermeable to liquids, smooth Processing area and process data Build volume (L x W x H): 280 x 280 x 365 mm Actual build rate: up to 113 cm³/h Lsdoy Rn A Iepfx Ahaeah Variable layer thickness: 20–90 µm Minimum feature size: 150 µm Beam focus diameter: 80–115 µm Scanning speed: max. 10 m/s Laser type: IPG fiber laser Single laser 700 watts Media supply Operating pressure argon: 7–8 bar Operating pressure nitrogen: 7–8 bar Operating pressure compressed air: 7–8 bar Operating pressure cooling water: 4 bar Compressed air quality: ISO 8573-1:2010 [1:4:1] Volume flow rate primary circuit: 1.4 m³/h Cooling water inlet temperature min.: 18 °C Cooling water inlet temperature max.: 20 °C Cooling medium: Coolflux MACHINE DETAILS Control system: SLM MCS Electrical connection values Connection: CEE 3/N/PE Voltage: 400 ±10 % V Frequency: 50/60 Hz Current draw: max. 40 A Connected load: 3.5–5.5 kW Heating power: 1,200 W Cooling power: 4.6 / 5.8 kW Largest motor: 7.5 kW Dimensions & weight Dimensions (L x W x H): 2,600 x 1,200 x 2,700 mm Shipping weight: 1,870 kg Operating hours: approx. 6,700 h EQUIPMENT Cooling is provided by “Cooling unit HRS050 L/W” Sieving station PSM100 V3 Handling device BPH280 and bottle lift (facilitates handling of powder containers and removal of substrate plates after printing) SLM280 2.0 complete material change kit incl. PSM100 Powder containers Substrate plates (1.2709 & AlSi10Mg) Additional filter housings Filter elements The system is currently still in operation and can be inspected by appointment. After the auction, the system will be disassembled by the machine manufacturer, loaded onto the company premises, and handed over to the buyer.

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 70 h, total length: 2,200 mm, total height: 2,600 mm, total width: 1,600 mm, type of input current: three-phase, overall weight: 2,500 kg, input voltage: 230 V, input current: 10 A, compressed air connection: 6 bar, input frequency: 50 Hz, ambient temperature (min.): 15 °C, ambient temperature (max.): 30 °C, volume flow: 15 m³/h, We are offering this used 5000 Massivit 3D printer (only 70 operating hours), year of manufacture 2023. Supply voltage: 220/380-240/415 V Connection type: 3W+N+PE Rated current: 10 A Frequency: 50/60 Hz Short-circuit current: 5 kA Air pressure: 6-8 bar Air flow: 250 L/min Weight: 2500 kg Laedsyvhubepfx Ahaoh If you have any questions or require more information, please feel free to send us a message or call us.

Condition: new, Year of construction: 2026, Technical data: Control system: Multiaxis real-time interpolator with active trajectory prediction, LAN communication, EtherCat protocol, sampling time under 1ms, correction map, RTCP, remote service access. Working area: 1500 – 3000 x 2100 – 12000 mm Z-axis clearance: 500 – 1200 mm Drive system: Omron servo drives with EtherCat protocol, X and Y axes equipped with helical, hardened and ground racks, precision class 6; Z axis with ball screw, precision class 5. Linear bearings: Bosch Rexroth 35 Lodpetz Sgiofx Ahaoah Travel speed: X, Y axes up to 45 m/min; C, A axes up to 6000 degrees/min Software resolution: 0.0005 mm Positioning accuracy: 0.01 mm Gantry drive: Dual-sided master/slave configuration with gantry angle correction Electrospindle: 8 kW to 36 kW Print heads: - G.12 with throughput up to 12 kg/h - G.20 with throughput up to 20 kg/h - G.50 with throughput up to 50 kg/h - G.200 with throughput up to 200 kg/h Maximum spindle speed: 24,000 rpm (options for 6,000, 40,000, or 50,000 rpm) Construction: Welded, ribbed, stress-relieved, and precision machined steel frame Table type: Vacuum, hybrid, steel T-slot, aluminum T-slot, aluminum vacuum with M16 or M18 holes Optional features: - Tool cooling - Linear or rotary tool magazine - Rotary axis on the table - Laser scanner - Positioning bases - Oscillating unit - 5-axis software package Granulate 3D printers can process a wide range of thermoplastics, such as PLA, ABS, PETG, polyamides, or polypropylene. #ploter #CNC #millingrouter #machiningcenter #3axis #4axis #5axis #3D #3Dprint #MDF #HPL #Plywood #chipboard #steel #aluminium #aluminum #brass #stainlesssteel #castiron #polypropylene #polycarbonate #acrylic #fermacell #BLUM