Used Pistol Screwdriver for sale (177)

Condition: ready for operation (used), Year of construction: 2022, An assembly line (workpiece carrier assembly system) item Bayern GmbH for loading, assembly, and (return) transport of workpiece carriers with two Deprag screwdrivers is available. Assembly principle: Karakuri (non-driven material flow principle), max. load: 30kg, max. stroke: 2630mm, max. speed: 1.63m/s. Assembly station dimensions X/Y/Z: approx. 12850mm/3350mm/2950mm, weight: approx. 1600kg, lift system dimensions X/Y/Z: approx. 9700mm/3350mm/1600mm, weight: approx. 400kg, control: item C3-05. The system is modularly adjustable at any time and complies with standardized industrial standards. Documentation available. An on-site inspection is possible. The system is dismantled. Fpsdjw Dfhnopfx Ad Neg

Year of construction: 2022, condition: as good as new (ex-display), Pressure washer PTC Easypower XL E similar but not Dynajet, Oertzen, Falch, Hammelmann, Woma, Uraca, Kamat, Denjet - Operating pressure: 400-1500 bar - Feed rate: 13-38 l/min. - Motor: IE3 electric 63A, 3Ph-400V-50Hz 50PS/37kW, 1450 1-min or IE3 electric 63A, 3Ph-440V-60Hz 50PS/37kW, 1750 1-min - Dimensions: 1,450 x 900 x 1,050 mm - Tare weight: approx. 450 and 550 kg - High pressure pump: HPP three-plunger pump with ceramic plungers - High quality painted steel frame with corrosion protection - Stainless steel covers Fpsdpfxofdzxij Ad Nsg - Holding device for pistol with lance - Trolly with industrial wheels - Ergonomic handles for easy manoeuvrability - Industrial low voltage supply (24V) and control unit with star-delta starter and 10 m. Power cable - Safety switch with thermomagnetic relay for motor protection - Main switch, start/stop buttons, emergency stop - Operating hours counter - incl. 20 m high pressure hose with stainless steel quick couplings, spray gun, lance and flat jet nozzle 15 The following models are available: Easy Power XL E 38/400 | 38l/min 400bar | 30kW | 560kg Easy Power XL E 30/500 | 30l/min 500 bar | 30kW | 560kg Easy Power XL E 20/800 | 20l/min. 800bar | 30kW | 580kg Easy Power XL E 15/1000 | 15l/min 1000bar | 30kW | 580kg Easy Power XXL E 19/1000 | 19l/min 1000bar | 37kW | 580kg Easy Power XXL E 15/1250 | 15l/min 1250bar | 37kW | 580kg Easy Power XXL E 13/1500 | 13l/min 1500bar | 37kW | 580kg

Year of construction: 2022, operating hours: 1 h, condition: as good as new (ex-display), Pressure washer PTC Easypower L E similar but no Dynajet, Oertzen, Falch, Woma, Kamat, Denjet - Operating pressure: 400 or 500 bar - Feed rate: 38 or 30 l/min. - Motor: electric 63A, 3Ph-400V-50Hz 40PS/30kW, 1450 1-min or electric 63A, 3Ph-440V-60Hz 40PS/30kW, 1750 1-min - Dimensions: 1,370 x 850 x 1,030 mm - Empty weight: approx. 280 kg - High pressure pump: HPP three-plunger pump with ceramic plungers - High quality painted steel frame with corrosion protection - Stainless steel covers - Holding device for pistol with lance - Trolly with industrial wheels - Ergonomic handles for easy manoeuvrability - Industrial low voltage power supply (24V) and control unit with star-delta starter and 10 m. Power cable - Safety switch with thermomagnetic relay for motor protection - 4 pieces industrial wheels Fodjfdzz Ujpfx Ad Nopg - Direct water intake through self-priming pump - Stainless steel relief valve with pressure relief system and EASY START system - 100 mesh water filter with easily replaceable cartridge - incl. 20 m high pressure hose with stainless steel quick couplings, spray gun, lance and flat jet nozzle 15 The following models are available: Easy Power L E 38/500 | 38l/min. 400bar Easy Power L E 30/500 | 30l/min 500bar

Year of construction: 2022, condition: as good as new (ex-display), Pressure washer PTC Easypower XL D similar but no Dynajet, Oertzen, Falch, Hammelmann, Woma, Uraca, Kamat, Denjet - Operating pressure: 400-1500 bar Fjdpfxjdg Itto Ad Nepg - Feed rate: 13-47 l/min. - Engine: Yanmar Stage V 4-cylinder 4TNV88 Diesel 53PS/39,5kW, 2800 1-min - Dimensions: 1.600 x 1.320 x 1.200 - Tare weight: approx. 740/760 kg - High pressure pump: HPP three-plunger pump with ceramic plungers - High quality painted steel frame with corrosion protection - Stainless steel covers - Holding device for pistol with lance - Available as skid with anti-vibration feet or as trolly with industrial wheels - incl. 20 m high pressure hose with stainless steel quick couplings, spray gun, lance and flat jet nozzle The following models are available: Easy Power XL D 47/400 | 47 l/min 400 bar Easy Power XL D 38/500 | 38 l/min 500 bar Easy Power XL D 30/600 | 30 l/min 600 bar Easy Power XL D 19/1000 | 19 l/min 1000 bar Easy Power XL D 17/1100 | 17 l/min 1100 bar Easy Power XL D 15/1250 | 15 l/min 1250 bar Easy Power XL D 13/1500 | 13 l/min 1500 bar

Condition: used, Vibratory bowl feeder / Sorting unit / Bowl feeder / Vibratory feeder RNA Vibrating bowl, sorting unit / Screw feeding with vibratory feeder for screwdriving technology Feeding system, feeder unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial no.: Year of manufacture: approx. 2000 Bowl diameter bottom: 300 mm Bowl diameter top: 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Overall height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 rpm Mains connection: 230 Volt, 50 Hz - The feeder was used for supplying automotive blade fuses Space requirements: Ø x H: 420 x 390 mm Weight of bowl feeder: 52 kg Linear feeder / Vibratory feeder / Sorting unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SLL 400-400 Serial no. 00835 Year of manufacture: approx. 2000 Maximum rail length: 700 mm Useful load: approx. 1.5 to 2 kg Vibration frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W x H 400 x 65 x 12 mm - Mounted track length 530 mm - Overall height with oscillating plate 145 mm Space requirements: L x W x H: 580 x 120 x 400 mm Fpedpfx Adeuzn Nnj Neg Weight of linear feeder: 20 kg Control unit for vibration drives, control device, regulator, controller for vibratory feeders / sorting unit / bowl feeder / vibrating bowl / vibratory conveyor Manufacturer: RNA Rhein-Nadel Automation GmbH Type: ESK-N80 / ESG 90 Mains connection: 0 ... 208 V eff (230VAC motor operation) at 230V mains 0 ... 98 V eff (115VAC motor operation) at 115V mains Output voltage: 0...208 V (eff.) adjustable, (230 V mains) Number of power outputs: 2 Output 1: Bowl feeder, linear feeder max. 10A adjustable Output 2: Bowl feeder, linear feeder max. 6A adjustable Total load current: 16 A eff Sensor inputs: 1 Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max. 60 mA Sensor delay ON: 0 ... 8 sec. Sensor delay OFF: 0 ... 8 sec. Power output connection: Hirschmann 7-pin - Two power outputs - Sensor amplifier with independently adjustable time stages (on/off) - Soft start (internally adjustable) - External enable input 24VDC Space requirements: L x W x H: 260 x 190 x 140 mm Weight of controller: 3.6 kg All units tested and in good condition.

Condition: excellent (used), Year of construction: 2003, Rink screwdriver with container and cap feeder Fpedpfx Adsyhzpxe Neg

Condition: excellent (used), mileage: 104,242 km, first registration: 04/2018, fuel type: diesel, axle configuration: 8x4, wheelbase: 3,900 mm, fuel: diesel, fuel tank capacity: 500 l, brakes: engine braking, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro6, Year of construction: 2018, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, electric window regulation, fog lights, navigation system, power mirror, soot filter, spoiler, trailer coupling, = Additional Options and Accessories = - Aluminum fuel tank - Brake booster - Low noise - Speed limiter - LED lights - Air suspension - Air horn - Particulate filter - Radio/cassette player - Reversing camera - Sun visor - Stability control - Toolbox - Power take-off (PTO) - Centralized lubrication - Towing jaw = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,809 cc Unladen weight: 23,000 kg Axle configuration Front axle: Steering Rear axle 1: Twin wheels Rear axle 2: Twin wheels Rear axle 3: Lift axle; steering Functional Body manufacturer: RSP ESE 6 RD 8000 Condition Technical condition: very good Visual condition: very good Financial Information Price: On request MERCEDES-BENZ AROCS 3251 8X4 TRIDEM RSP ESE 6 RD 8000 SUCTION EXCAVATOR EURO 6 L PACKAGE 510 HP DRIVE 8X4 TRIDEM LAST AXLE LIFTABLE AND STEERABLE WHEELBASE 390 CM AIR SUSPENSION AROCS CAB WITH AIR CONDITIONING, NAVIGATION, CAMERA DIFFERENTIAL LOCK AUTOMATIC TRANSMISSION TRAILER COUPLING RSP SUCTION EXCAVATOR TYPE: ESE 6 RD 8000 TWIN TURBINES!!! HYDROSTATIC DRIVE WITH REMOTE CONTROL POWER BOOM WITH ROTARY HEAD TANK 8M3 WATER TANK 200L CENTRAL LUBRICATION 2X RADIO REMOTE CONTROL Fpedpfxjuxvc Do Ad Nog EXTRA HIGH-PRESSURE PUMPING UNIT WITH HOSES AND PISTOL EXTRA AIR OUTLETS AT THE REAR OF THE TRUCK FOR OPERATING AIR TOOLS SUCH AS A HAMMER COMPRESSOR 2,588 HOURS FAN 336 HOURS ALL AVAILABLE MANUALS AND SERVICE BOOKS FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WIR SPRECHEN DEUTSCH HABLAMOS ESPAÑOL WE SPEAK ENGLISH

Condition: reconditioned (used), functionality: fully functional, URBAN POWER SCREWDRIVER with automatic SCREW FEEDER Technical data: Air connection: 7 bar Length: 1,400 mm Width: 700 mm Fsdpfxox U An Ts Ad Njpg Height: 1,800 mm Weight: 100 kg Machine overhauled

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Internal number: #401 Mercedes-Benz Arocs 3251 8x4 | KROLL ADR Combi K 1.0–18.0/28PE | NEW This Mercedes-Benz Arocs 3251 8x4 with KROLL ADR combined jetting and suction pressure tank superstructure is a NEW vehicle featuring maximum performance and complete ADR equipment. Equipped with a VacuStar WR 3100, Uraca KD 718, large hose storage cassette, telescopic boom, and extensive special features, it is immediately ready for demanding sewer, industrial, and hazardous goods operations. -- Superstructure -- • Manufacturer: KROLL Fahrzeugbau-Umwelttechnik GmbH • ADR Combi K 1.0–18.0 / 28 PE • Tank volume: 18,000 l • Service water compartment: 1,000 l (for vacuum pump) • Telescopic piston with 3 locking positions • Suction from open water sources possible (“comfort version”) • ADR equipment, type class AT/FL • Emptying via pneumatically operated piston • Sludge water drain DN80 for discharge back into the sewer via the boom -- Vacuum System -- • CVS VacuStar WR 3100 • ca. 3,100 m³/h at 200 mbar • Cooling via 1,000-l service water tank, pressureless external mounting • Approx. 20 m HD hose DN125 • Additional suction hose reel, through-feed on right rear (approx. 30 m DN80) -- High-Pressure System -- • Uraca KD 718 • approx. 315 l/min at 170 bar • Large HD hose reel for 240 m DN25, 180° swiveling • Fitted with 160 m DN25 • Small HD hose reel for 80 m DN13, hydraulic • Fitted with 80 m DN13 -- Special Features -- • Hose storage cassette with DN125 telescopic boom • Infinitely adjustable suction hose height (hydraulic, roller guide carriage) • Hydraulic, telescopic, 180° swiveling boom • ADR L4BH, incl. EX/II, EX/III and AT • Spray pistol • LED beacon lights • LED working area lighting • CAN-BUS remote control for work functions • Radio remote control with 14 functions • Warm water hand wash facility • Cabinet on driver’s side behind the pump (e.g. for work clothing) • Large cabinet rear left (e.g. for push camera) • Reverse camera • Acoustic enclosure in pump room • Water shortage warning system (with buzzer + automatic pump shutdown) • Pneumatic residual water drainage (all water-carrying parts) • Large storage compartment / equipment box • Toolbox • Traffic cone holder • Vise • Electric cable winch • Ladder • Large advertising panels right & left -- Special Equipment -- • Axle load weighing system • Digital radio DAB/DAB+ • ADR equipment package • Passenger side mirror with maneuvering position • 220 Ah battery • Interactive multimedia cockpit • 24V/100A electrical pre-installation cab • High beam assistant & cornering light • Movable cab entry • Front suspension: 9.0 t / 4-leaf • Tinted windscreen with sun filter band • ADR type FL • Speed limiter • 16-speed transmission G 280-16 • Gearbox lock • Rear axle bevel gear 300 • 3-piece fenders with splash guards Fodpfx Adoxc S Ays Nepg • 290-litre aluminium diesel tank • Cool box / refrigerator • Climate package for hot regions • Front-mounted air intake • Reinforced engine brake • Trailing axle 9 t (steerable, unloadable, liftable) • Navigation system • PTO (independent of gearbox & clutch-dependent) • Programmable special module • Wheelbase variant 3,900 mm • Frame overhang 1,200 mm • Rain sensor • Acoustic reversing warning + hazard warning light • 2 × additional keys with remote control • Circuit breaker • Velvet seats, driver/co-driver • Comfort swi...

Condition: used, Year of construction: 2014, Manufacturer : MCPI Fine dosing Model: OPTI-FEEDER FD - SPA - class 2A Year : 2014 Type : Micro dosing machine / Precision dosing machine   Type of product : powder / granules, dry form Type of dosing : weight by batch in gravimetric mode Weight measurement chain : Weighing scale / Precision weigher   Fjdpfxjx R Df Ss Ad Nepg Hopper: 2 litres Filling of doser storage hopper: Manual Electronic weighing control and management Extractor outlet cross-section: 80 mm Dosing sequence: 3 dosing speeds (coarse, medium and fine) to optimise the precision / dosing speed ratio Dosing quality monitoring (+ and - tolerance interval) Scale measurement resolution: 10 mg (0.01 g) Minimum dose (estimate): 250 mg Maximum dose (estimate): 500 g   Memory for 800 different dosing recipes Trigger: hand sensor Results retrieved on USB key, and analysed in Excel. Control unit: Unit built to CE standards. All control and command elements are integrated into this box (controller, PLC, drive, safety devices, switches, etc.). Power supply: 220V - single-phase Doser / control box connection: direct   Materials in contact with the ingredient : 304L electro-polished stainless steel. Construction according to GMP rules   Manual electric screwdriver Machine dimensions: 95 x 75 x H 170 cm Documentation available

Condition: good (used), Compressed air gun, 2-component gun, multi-function gun, cartridge gun Fedpfxsd Sacco Ad Nepg Compressed air pistol TS460 XH is a compressed air pistol for side-by-side cartridges 490 ml. Compressed air pistol TS460 XH is suitable for processing 2K adhesives and 2K sealants. -rechargeable battery - cartridges - pistol -2x: battery 3, 6 V/Li-Ion -with: charger and case -Dimensions: 640/300/H160 mm -Weight: 4.7 kg

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, Pressure washer PTC Easypower B similar but no Dynajet, Oertzen, Falch, Woma, Kamat, Denjet, Kärcher, Dibo, - Operating pressure: 500 or 700 bar - Delivery rate: 21 or 15 l/min. Fpjdpfx Adofdz Eys Njg - Engine: Vanguard 31 HP Stage V petrol 31PS/23kW, 3400 1-min - Dimensions: 1.000 x 820 x 850 mm - Empty weight: approx. 190 kg - High pressure pump: Comet TW 500 Premium three-plunger pump with ceramic plungers - Gearbox with 1560 1-min. pump - High quality painted steel frame with corrosion protection - Stainless steel covers - Holding device for pistol with lance - Trolly with 4 pieces industrial wheels 350mm - Electric starter - Operating hours counter - Stepless pressure valve made of stainless steel with EASY-START - Large water filter with easy to maintain filter cartridge - incl. 20 m high pressure hose with stainless steel quick couplings, spray gun, lance and flat jet nozzle 15 The following models are available: Easy Power B 21/500 | 21 l/min 500 bar Easy Power B 15/700 | 15 l/min 700 bar

Condition: used, Year of construction: 2000, Pneumatic clamps to immobilize chairs while the operator performs operations, for example via screwdriver or similar Fpodpfx Adeydb Hxo Nog Working dimensions: cm. 50x60

Condition: good (used), Stud welding machine, stud welding compact system, stud welding machine, stud welding -maximum current: A -without a pistol Fedeb H Rk Tepfx Ad Nspg -Housing: robust -for threaded bolts: max. 10 mm -Number: 3x stud welding machines available -Price: per piece -Dimensions: 420/220/H290 mm -Weight: 14 kg

Condition: ready for operation (used), Stöger 9278 screwdriving automation SN: SES003743 with 2 x Kistler Z90002.15 sensors SN: 5078913 + 5078912, used, in good condition, 100% fully functional, scope of delivery as per photos. Fjdpfsx Eu Sxjx Ad Nspg

Condition: ready for operation (used), Stöger 9280 Screwdriving Automation SN: SES003744, used, in good condition, 100% operational, scope of delivery as per photos. Fsdpfxex Eu S Ee Ad Njpg

Year of construction: 2025, condition: used, New: Yes Field of application: Construction Please contact Kristoff Van Havere for more information - 12 Volt pump with automatic pistol - Lockable - loadable with forklift - 220 liter and 430 liter available - Dimensions 220 litre: H: 700 L: 800 W:600 mm - Dimesions 430 litre: H:800 L:1195 W:790 mm - Weight: 35 kg - 220 liter: 620€ net Fjdpfjw Thkcsx Ad Njpg - 430 liter: 788€ net

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: X 44733, Plastic injection moulding machine | Stork S+ 4400-2150 - Clamping force: 4400 kN - Opening stroke: 720 mm - Tie bar distance: 730 x 730 mm - Mould height: 500–1050 mm - Screw diameter: 62 mm - Shot volume: 951 cm³ Fsdpfx Asxwva Eod Njpg - E-Screwdrive An inspection can be arranged at any time by appointment.

Condition: ready for operation (used), Weber 1117033 04.07 screwdriving unit 438612/KW - Length: 48 cm, used, in good condition, 100% functional, delivery as shown in the photos. Fpjdpfxox Dxq He Ad Nog

Condition: new, Year of construction: 2025, functionality: fully functional, Double-sided opening cabin allows for sandblasting of large-size elements (e.g. engine block, motorcycle frame) without the need to rotate the object. Fodsv Aad Aspfx Ad Nopg Dust-free operation of the device is ensured by the use of peripheral seals, which allows the work to be performed in an environmentally friendly manner. The sandblasting hose is located at the bottom of the collecting container. The drain hole allows for a quick change of sandblasting material. The sandblaster is used for cleaning and treating various types of surfaces, e.g. removing rust, paints, deposits from metal surfaces, e.g. automotive parts, engines, fittings, housings, wheels, rims, etc. The abrasive can be, among others, quartz , silicon, glass beads, plastic sand, emery and other materials. TWO SEPARATE PRESSURE REGULATORS FOR EACH WORK STATION TWO CYCLONE EXTRACTIONS WITH DUST FILTERS ENSURING DUST-FREE WORKING Technical parameters Internal dimensions of the cabin 1150 x 1260 x 800 mm External dimensions 1800 x 1400 x1880 mm Working pressure 4 - 8 bar Capacity 1,200 L Abrasive (abrasive) corundum, glass abrasive, and sand Weight 196 kg Standard equipment 8 ceramic nozzles 15 removable visor films 2 industrial pistols 2 pairs of work gloves 2 cyclones 2 pressure regulators 2 foot controls Manufacturer: Cormak

Condition: new, grinding range 3 -28 mm angle adjustable from - to horizontal 0-180 Grad Fsdpfx Aovn U Adod Njpg angle adjustable from - to vertikal 0-45 Grad angle adjustable from - to negativ 0-52 Grad clamping range 3 - 28mm mm 0 5200 U/min connected load 230 / 250 Volt / Watt wheel diameter 100 x 50 x 20 mm weight of the machine ca. 45 Kg dimensions 0,5 x 0,4 x 0,4 m This grinder is ideal for regrinding tools such as end mills, drills, TIG welding needles and much more. comes standard with: Lathe tool accessories Drill accessories Accessories for milling 5C spring collet (4-6-8-10-12 mm) Clutch key 38-42 Grinding wheel wrench Allen key M3-M8 screwdriver Diamond grinding disc Ø 100 x 50 x 20 Grinding wheel: Ø 100 x 50 x 20 Diamond pen Spring collet: 3/16" - 5/16" - 3/8" - 1/2"

Condition: new, range L-W-H 780x480x105 mm weight 79,5 kg 7 St. Tool trolley with 7 drawers. Tool trolley has two normal and two swivel castors with brakes. Tool trolley completely lockable with an integrated lock. Fodpfsu Imlhex Ad Njpg Drawers can be locked per compartment. All drawers equipped with quick lock and soft-closing mechanism. Tool trolley is equipped with 196 pieces of tool parts: 3 pcs socket wrench sets: 1/4" from 4 - 14mm, 3/8" from 6 - 22mm and Torx from E10 - E20, 1/2" from 8 - 32mm. Various screwdriver sets. Extension for socket wrench sets, various Allen keys from 1 - 10mm, various files. Ratchet ring spanner set from 6 - 22mm, ring spanner set from 6 - 22mm. Pliers range.

Condition: new, range L-W-H 780x480x105 mm weight 79,5 kg 7 St. Tool trolley with 7 drawers. Tool trolley has two normal and two swivel castors with brakes. Tool trolley completely lockable with an integrated lock. Fedpfxou Impgs Ad Nepg Drawers can be locked per compartment. All drawers equipped with quick lock and soft-closing mechanism. Tool trolley is equipped with 196 pieces of tool parts: 3 pcs socket wrench sets: 1/4" from 4 - 14mm, 3/8" from 6 - 22mm and Torx from E10 - E20, 1/2" from 8 - 32mm. Various screwdriver sets. Extension for socket wrench sets, various Allen keys from 1 - 10mm, various files. Ratchet ring spanner set from 6 - 22mm, ring spanner set from 6 - 22mm. Pliers range.

Condition: new, range L-W-H 790 x 460 x 960 mm weight 70 kg 7 St. Tool trolley with 7 drawers equipped with tools - The pull-out drawers are all ball-bearing. - The entire workshop trolley is lockable. - Drawer 1 1/4" premium ratchet. 1/4" knee joint 45 mm. 1/4" extension 100mm. 1/4" socket wrench 4, 4.5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm. 1/4" long buttons 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 mm. 3/8" premium ratchet. 3/8" knee joint 55 mm. 3/8" extension 150mm. 3/8" socket wrench 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm. 3/8" long socket wrenches 10, 11, 12, 13, 14, 15, 17, 19 mm. 1/2" premium ratchet. 1/2" knee joint 75 mm. 1/2" extension 125mm. 1/2" Sockets 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 19, 21, 22, 24, 27, 30, 32mm. 1/2" Long Sockets 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 22mm. - DRAWER 2 Ring, ratchet and socket wrench set consisting of. Sockets 8, 9, 10, 11, 12, 14, 15, 16, 17, 19, 21, 22, 24, 27, 30mm. - DRAWER 3 1/4" arbor drill TT8, TT9, TT110, TT20, TT25, TT27, TT30, TT40. 1/4" plug-in bits T8, T9, T10, T15, T20, T25, T27, T30, T40. 1/4" plug-in bits HW3, HW4, HW5, HW6, HW7, HW8. 1/4" recording bits S0, S1, S2, S3, S4. 1/4" locating drill V6, V8, V10. 1/4" locating drill H6. 1/4" receiving bits FD4, FD5.5, FD6, FD7. 1/4" recording bits PH1, PH2, PH3. 1/4" pickup bits PZ0, PZ1, PZ2, PZ3. 1/4" recording bits H2, H4, H5. 8mm locating bits PZ1, PZ2, PZ3, PZ4. 8mm locating bits PH1, PH2, PH3, PH4. 8mm locating bits T20, T27, T30, T35, T40, T45. 8mm locating bits SL 4, SL5.5, SL6, SL6.5. 8mm allen bits Allen 7, 8, 10. 1/2" recording bits M18 Spline (POWER) 1/2" plug-in bits H14, H17, H19, H22, H24. 1/2" locating bits M16 Spline. 1/2" arbor M16 Spline 100 mm long. 1/2" locating drill T80 - 100 mm long. 1/2" pick-up bits M9, M16 - 100 mm long. 1/2" locating drill R9 - 100 mm long. 1/2" Pick-up Bits R10 - 140mm long. Fpodpfeu Imnpsx Ad Neg 1/2" drill T40, T45, T50, T55, T60, T70 - 140 mm long. 1/2" drill H10, H11, H13 - 140 mm long. 1/2" drill M10, M12, M14 - 140 mm long. 1/2" locating drill H5 - 160 mm long. 1/2" pickup bits H7 - 230mm long. 1/2" locating drill R7, R8 - 230 mm long. 1/2" locating drill H7 - 230mm long. 1/2" locating drill T30 - 300 mm long. 1/2" adapter to 10 mm square. - DRAWER 4 screwdriver flat. 2.5x50, 3x75, 5x100, 6x100. screwdriver cross. PH 2.5x50, 4x75, 5x75, 6x100, 8x150. Impact Screwdriver Plat. 5x75, 6x100, 8x150, 6x38 Stubby. Cross Impact Screwdriver. 5x75, 6x100, 8x150, 6x38 Stubby. - Drawer 5 T-handle Allen with ball head. 2x100, 2.5x100, 3x100, 4x150, 4.5x150, 5x150, 6x150, 8x200, 10x200mm. T-handle Allen. 2x100, 2.5x100, 3x100, 4x150, 4.5x150, 5x150, 6x150, 8x200, 10x200mm. - DRAWER 6 Water pump pliers 250 mm. Combination pliers 150 mm. Needle nose pliers 150 mm. Curved pliers 150 mm. Side cutters 150 mm. Inner curved sealing pliers 170 mm. External curved sealing pliers 170 mm. External sealing pliers 180 mm. Sealing pliers 1.5 x 102, 2 x 102, 3 x 114, 4 x 127, 5 x 127, 6 x 140 mm, Claw hammer with fiberglass handle. - DRAWER 7 Socket wrench 6mm. Socket wrench 7mm. Socket wrench 8mm. Socket wrench 10mm. Socket wrench 11mm. Socket wrench 12mm. Socket wrench 13mm. Socket wrench 14mm. Socket wrench 15mm.

Condition: new, range L-W-H 960 x 460 x 860 mm weight 75 kg 8 St. Tool trolley with 8 drawers, all with tools. - The pull-out drawers are all ball-bearing. - The entire workshop trolley is lockable. - The workshop trolley has 4 stable castors, 2 steerable and lockable. - The tools included are made of chrome vanadium steel. - The workshop trolley has 4 stable castors, 2 steerable, 2 lockable, which ensure very comfortable rolling. On the tool trolley there is a stable worktop made of polypropylene plastic. - The tools included in the workshop trolley are made of chrome vanadium steel and are stored in Styrofoam/foam inserts. + Drawer 1: - 1/4" inch: 13 nuts from 4mm to 14mm, 11 long nuts 4mm – 13mm Ratchet, universal joint, extension. - 3/8" inch: 10 nuts from 10mm to 19mm, 11 long nuts from 6mm to 19mm Ratchet, universal joint, extension. - 1/2" inch: 17 nuts from 8mm to 32mm, 9 long nuts from 10mm to 22mm Ratchet, universal joint, extension. + Drawer 2: - Accessories 1/4" inch ratchet: Torx nuts without hole T8,T9,T10,T15,T20,T25,T27,T30,T40 Torx nuts with hole TT8,TT9,TT10,TT15,TT20,TT25,TT27,TT30,TT40. Allen nuts H3 to H8 Slotted nuts SL4 to SL7 Cross nuts PZ0 to PZ3, PH0 to PH3 Multi-tooth nuts M8, M10, M12 Five-star nuts TS10, TS15, TS20, TS25, TS27, TS30, TS40, TS45, TS50 - Accessories 3/8" inch ratchet: Attachment for bits Torx nuts without hole T40, T45, T50, T55, T60, T70 Torx nuts with hole TT40, TT45, TT50, TT55, TT60, TT70 Allen nuts – H7, ??H8, H10, H12, H14 Slotted nuts SL8, SL10, SL12 Cross nuts PZ3, PZ4, PH4, PH8 - Accessories 1/2" inch ratchet: Fpedpfou Impyjx Ad Nsg Allen H14,H17,H19,H22,H24 Allen key H5,H10,H11,H13 Torx T40,T45,T50,T55,T60,T70,T80 Ribe R9, R10, multi-tooth M16 Multi-tooth M9,M10,M12,M14,M16,M18 Short attachment, long attachment, medium attachment, Torx T30,T45,T50, Allen key H7 + Drawer 3: - Open-end ratchet wrench 8-9-10-11-12-13-14-15-16-17-19-22mm; - Double ring spanner set 8-piece 6-7mm, 8-9mm, 10-11mm, 12- 13mm, 14-15mm, 16-17mm, 18-19mm, 20-22mm - Torque wrench + Drawer 4: - Precision mechanics screwdriver Slotted: SL3.0 x 100mm, Cross: PH0 x 100mm - Screwdriver with soft grip and outside hexagon: Slotted: SL6 x 38mm ; SL5 x 75mm ; SL6 x 100mm ; SL8 x 150mm Cross: PH2 x 38mm ; PH1 x 75mm ; PH2 x 100mm ; PH3 x 150mm - Torx screwdriver: T6 x 80 ; T7 x 80 ; T8 x 80 ; T9 x 80 ; T10 x 80 ; T15 x 100 ; T20 x 100 ; T25 x 100; T27 x 100 T30 x 100 ; T40 x 150. + Drawer 5: - T-handle Allen / hexagon set with ball head: 3 x 115mm ; 4 x 120mm ; 5 x 140mm ; 6 x 160mm ; 7 x 170mm ; 8 x 175mm ; 10 x 200mm. - T-handle TORX T10 – T40 + Drawer 6 - Circlip pliers set inside/outside 4 pcs., 2x curved, 2x straight - Pliers set: combination pliers, side cutters, straight needle-nose pliers, curved needle-nose pliers, pipe wrench. - Lath hammer + Drawer 7 - Socket wrenches 6, 7, 8, 10, 11, 12, 13, 14mm + Drawer 8 - Tools for bodywork processing