Used Placke Qpb-4 150/3100 for sale (64,289)

Condition: ready for operation (used), Bosch VM 60 / 150 power supply module 1070046009-112 SN:275136, used, normal signs of use, 100% fully functional, delivery as shown in photos. Kljdpfjx Eqzpex Amtjw

Condition: ready for operation (used), Trumpf 150 MQ VIS focusing optic 22-43-69-00, used, in good condition, 100% functional, scope of delivery as per photos. Kjdjx Eu Umspfx Amtelw

Condition: used, mileage: 69,745 km, power: 118 kW (160.44 HP), first registration: 10/1989, fuel type: diesel, empty load weight: 7,500 kg, maximum load weight: 8,300 kg, overall weight: 15,800 kg, tire size: 11R22.5, axle configuration: 4x2, color: grey, driver cabin: day cab, gearing type: mechanical, emission class: none, suspension: steel, number of seats: 2, Equipment: cabin, trailer coupling, Vehicle location: Bovenden, 1x air seat, rear window, switch 6, power take-off, storage box, leaf spring suspension, air+light trailer hitch, U-protection, side aluminum driving protection, roof hatch Deutz engine! Vehicle operating hours: 11954! Tires approx. 80%! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Klsdpevhhz Tofx Amtjw - .

Condition: used, mileage: 1,001 km, power: 22 kW (29.91 HP), gearing type: other, color: grey, first registration: 01/1964, Year of construction: 1964, driver cabin: other, Vehicle location: Bovenden, Kledpsvhl H Hsfx Amtsw Working pressure 17 bar! Boiler diameter 775mm! 2x 4-cylinder single compressor 2-stage type HL1785 Z4! 2x 15 HP! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, mileage: 65,095 km, power: 196 kW (266.49 HP), first registration: 03/2000, fuel type: diesel, empty load weight: 9,300 kg, maximum load weight: 6,700 kg, overall weight: 16,000 kg, tire size: 275/70R22.5, axle configuration: 4x2, color: red, driver cabin: other, gearing type: mechanical, emission class: euro1, suspension: steel, number of seats: 9, Equipment: ABS, additional headlights, all wheel drive, cabin, cable winch, differential lock, parking heater, trailer coupling, Vehicle location: Bovenden, Doka, auxiliary heating, switch 8, ABS (anti-lock braking system), differential lock, rotating beacon, storage box, cable winch, trailer hitch air+light Superstructure: Tank fire-fighting vehicle with 1600l extinguishing water tank, fixed Magirus fire-fighting centrifugal pump & Rotzler Treibmatik TR030 front cable winch Body length approx. 3800mm! Klsdpjvhicrsfx Amtsw The sale to tradesmen or export is subject to 19% VAT! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: good (used), Year of construction: 1996, Well-maintained, used press brake from Beyeler / Bystronic. Type PR6 150 4100 Capacity: 4100 x 150 tons Cybelec DNC 880S Y1, Y2, X, R, Z1, and Z2 axes CNC controlled Includes a set of tools. Kedpfozbhh Rsx Amtelw

Condition: new, functionality: fully functional, machine/vehicle number: NEW-15, empty load weight: 449 kg, maximum load weight: 901 kg, overall weight: 1,350 kg, axle configuration: 1 axle, loading space length: 2,560 mm, loading space width: 1,340 mm, loading space height: 1,500 mm, loading space volume: 5 m³, suspension: other, tire size: 185 R 14 C, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS GO 256 134 150 1350 1 Box trailer NEW VEHICLE Internal dimensions: 256cm x 134cm Internal height: 150cm Loading platform height: 54cm Total weight: 1350Kg Payload: 901Kg Braked single-axle low loader Overrun brake and parking brake by AL-KO 1350Kg axle with brake Low chassis Fully welded, hot-dip galvanized steel frame 15mm screen-printed plywood walls and roof Interior: Gray Exterior: White GRP coating Optimal base for wrapping or lettering Rear double doors made of screen-printed plywood with locking mechanism Water drain above the double doors 15mm thick, non-slip, and robust screen-printed plywood floor Bow jockey wheel Lashing rail (airline) with 600Kg pulling force integrated into the floor 4 adjustable lashing points for airline rail LED interior light 14" reinforced C tires M+S tires 13-pin connector Side marker lights in front Rear lights with reversing light and triangular reflectors 2x U-shaped chocks Kedpfx Amoghpb Sstolw OPTIONAL ACCESSORIES WITH PERMANENT PRICE REDUCTION FROM FEBRUARY 2026 - Modification of the internal height to 138cm or 180cm - Equipment for 100km/h (shock absorbers) - Spare wheel with holder - Ramps - Side door on the left or right, 72cm - Ramp instead of double doors, 750Kg incl. lifting aid - SARIS aluminum wheels - Complete LED lighting - Anti-theft device - Anchor rail with locking bar - Rear supports Further accessories available upon request! Plus freight to Gera and vehicle registration certificate 250 € net. Pictures are for illustrative purposes and may show optional accessories that incur an extra charge. Haven't found the right trailer yet? We have 50-100 vehicles permanently and immediately available in stock. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all kinds of repairs. Specialist in axle repair, also for caravans. Large selection of rental trailers. Hnobqeghpbyeupd Nfoh We also have a large selection of spare parts and accessories for trailers from all manufacturers. Get advice by phone, visit our website, or come directly to our location.

Condition: used, Baumüller frequency inverter 55-88 kW, BUM63A-150- removed from Krauss Maffei KM 18 C3 - removed from running machine - fully functionalmanufacturer: Baumüller Nuremberg type: BUM63A-150 spare part no.: 6443081 Klodpeltrpzefx Amtow manufacturer no.: 345449 Dition: gebraucht

Condition: excellent (used), mileage: 816,777 km, power: 302 kW (410.61 HP), first registration: 02/2003, fuel type: diesel, tire size: 385/65 R22,5, axle configuration: 4x2, wheelbase: 5,100 mm, fuel: diesel, driver cabin: sleeper cab, suspension: other, total length: 8,250 mm, total width: 2,500 mm, total height: 3,000 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, loading space volume: 15 m³, Year of construction: 2003, Equipment: ABS, air conditioning, airbag, cruise control, electric window regulation, power assisted steering, trailer coupling, = Additional Options and Accessories = Klsdpfozaqmmsx Amtow - Air-suspended seats - Power Take-Off (PTO) - Radio/CD player - Sleeper cab - Sun visor - Immobilizer = Additional Information = Technical Information Number of cylinders: 6 Front axle: Tire size: 385/65 R22.5; Max. axle load: 9000 kg; Suspension: Parabolic leaf spring Rear axle: Tire size: 315/70 R22.5; Dual tires; Max. axle load: 11500 kg; Suspension: Air suspension Weights Unladen weight: 9,904 kg Payload: 10,596 kg GVW: 20,500 kg Functional Body manufacturer: ATCOMEX Number of chambers: 4 Pump: Yes Hoses: Yes Condition Technical condition: very good Optical condition: very good Identification License plate: BN-LR-92

Condition: excellent (used), Year of construction: 2004, CATALOG NUMBER 7880 Technical data: - max cutting height: 150mm Kjdpfx Aszcck Asmtjlw - max element width: 500mm - working width of shaft with saws: 400mm - shaft diameter: 70mm - max saw blade diameter: 450mm - from above: - anti-kickback devices - 2 toothed feed rollers – pneumatically pressed - from below: - slip roller - anti-kickback devices - 2 toothed feed rollers - saw shaft - 2 toothed feed rollers - stepless feed speed adjustment via inverter - feed motor: 3kW - main motor: 55kW - overall dimensions L/W/H: 2120x1600x1630mm - weight approx. 2750kg ADVANTAGES – Polish-made – robust construction – Used machine, in very good condition Net price: 55,900 PLN Net price: 13,310 EUR at 4.20 EUR exchange rate (Prices may vary with greater exchange rate fluctuations)

Condition: excellent (used), functionality: fully functional, Used Maguire plastic drying units are for sale. This listing includes a total of 13 units, with the option to purchase individual units or a larger package. Available are Low Pressure Dryer and Vacuum Batch Dryer / vertical dryer models. Condition as shown in the photos. Price depends on the selected unit and quantity. These dryers are designed for drying plastic granules. The units are used, and their technical and visual condition corresponds to the photos. Additional photos of a specific dryer can be provided upon request. Available units: Klsdpfx Amozc D Ebstew No. Designation Type / model as shown in the photos 1 D067 Maguire Low Pressure Dryer, model LPD2HE4 2 D049 Maguire Low Pressure Dryer, model LPD1HE4 3 D084 Maguire Low Pressure Dryer 4 D099 Maguire Low Pressure Dryer, model LPD1HE4 5 D054 Maguire Low Pressure Dryer, model LPD1HE4 6 D051 Maguire Low Pressure Dryer, model LPD1HE4 7 D065 Maguire Low Pressure Dryer, model LPD1HE4 8 D071 Maguire Low Pressure Dryer, model LPD1HE4 9 D068 Maguire Low Pressure Dryer, model LPD2HE4 10 D076 Maguire Vacuum Batch Dryer, model VBD-150 11 D081 Maguire Vacuum Batch Dryer, model VB-150 12 D089 Maguire Vacuum Batch Dryer, model VB-150 13 D091 Maguire Vacuum Batch Dryer, model VB-150

Condition: excellent (used), functionality: fully functional, Selling an original Homag Group glue application unit (upper part with glue application roller and drive coupling) for edge banding machines of the Brandt / Homag brand. The unit is in good, clean condition with normal signs of wear and tear (see article photos). It features the practical quick-change system, including the corresponding locking pins (ball handles) and the original Harting connector. Technical data & details: Manufacturer: Homag Group / Brandt Part number (engraved): 4-030-15-0531 (4030150531) Klodpoy Uv Umefx Amtew Components: Knurled glue roller, metering slide for layer thickness adjustment, protective grille, high-temperature-resistant connecting cable with Harting connector, 2x locking pins. Suitable for: Many models of the Brandt Optimat series (KDN / KDF / Ambition, etc. – please check the part number with your machine beforehand).

Condition: excellent (used), Catalogue number 7975 TECHNICAL DATA - Infeed width: 450 mm - Infeed height: 250 mm - Shaft width: 530 mm - Knife length: 530 mm - Number of knives: 2 pcs - Sieve dimensions: 50x50 mm - 2 toothed feed rollers from below - Lower feed roller motor approx. 2.2 kW - Toothed feed roller from above - Upper feed roller motor approx. 2.2 kW - Conveyor belt - Conveyor belt length: 6500 mm - Conveyor belt width: 400 mm - Main motor 37 kW - Conveyor motor 0.37 kW - Autoreverse (adjustable) - Overall machine dimensions (L/W/H): 2400x1300x1100 mm - Conveyor overall dimensions (L/W/H): 6600x610x550 mm - Weight approx. 2500 kg – German manufacture – Autoreverse (adjustable) – protects the machine from blockage and damage in case of overload – With 6500 mm conveyor Kledszadb Repfx Amtow – Used shredder, in very good condition Net price: 115,900 PLN Net price: 27,600 EUR based on 4.2 EUR rate (Prices may change with significant currency fluctuations)

Condition: used, Technical details: max. temperature: 150° Grad voltage: 380 Volt V / Hz current- max.: 6,5 A weight: 65 kg dimensions L x W x H: 0,68 x 0,22 x 0,58 m Working Area / Application: water tempering system transportable - connection coolant water: inlet and outlet Ø 12mm internal with bayonet connection - connection circulating medium: inlet and outlet Ø 12mm with bayonet connection - control via control panel equipment: - 1400mm connection cable Optional test run possible. Kledpou N Ag Rsfx Amtow *

Year of construction: 1998, condition: used, Technical details: pipe system - processing diameter: - mm pipe system - inlet: - mm volume flow ventilator - shred: - m³/h connection electric: 400 V Air volume: 2700 m³/h filter surface area: 52,5 m² volume: 18,7 L max. temperature: 50 Grad operating pressure: -/+ 0,1 bar weight of the machine approx.: 1250 kg Pressure max.: 5 bar dimensions L x W x H: 2,3 x 2,35 x 2,8 m Extraction of fibers - Reduction of spillage in transport containers, eg. Big Bags. / YOM approx. 2010 delivery scope: Suction fan Manufacturer Dantherm Filtartion, type T 0,56-224 RD0 D1, air supply quantity 2600 Nm³ / h, suction nozzle Ø 150mm to Ø 100mm, blow-out nozzle Ø 130mm to Ø 100mm Ksdpfx Aow Awwfemtjlw Chip separator Two doors with attached air filter, door opening W x H: 1000 x 1960mm, interior space W x D x H: 1200 x 1160 x 1950mm, with filter attachment 1100 x x1100 x 350mm, filter surface 1200 x 1200mm, 2pcs filter (filter mat) 1200 x 600 x 50mm, insertion nozzle dia. Ø 100mm, with clamping bag attachment Optional accessories: -div. clamping bag -div. connecting tubes Ø 100 x 1000mm -div. connecting tubes Ø 100 x 300mm -div. connecting tube Ø 100 x 320mm -div. angle connections Ø 100mm -div. bayonet catches for pipe connections i.D. *

Condition: used, Technical details: Volt: 380 V Ampere: 150 A charging voltage: 24 V total power requirement: 3,6 kW weight of the machine approx.: 100 kg space requirements approx. LxWxH: 0,5x0,6x0,8 m Battery charger for electric forklift trucks, electric pallet trucks - 3 pieces available - All 3 devices are equipped with charging cables. Condition: not checked. Ksdpfxeu Nu Srj Amtjlw On sale as is! *

Condition: used, Year of construction: 1986, Technical details: sheet width: 650 mm coil weight: ca. 2 t coil internal diameter: 350 - 570 mm electrics - voltage/frequency: 380/50 V/Hz total power requirement: ca. 1,5 kW weight of the machine ca.: 2,0 t space requirements approx. LxWxH: 1,8 x 3,0 x 1,9 m Coiler with Feeding Device - Sizes of coiler: W:1,20 x D:1,10 x H:1,60m - Roll distance: 0 - 5,5 mm - Rolls turning rate: min.:4,3 rpm, Max.:43 rpm - Rolls dia.: 100 mm - Feeding min.: 1350 mm/min, max.:13500 mm/min - Sizes of feeder: W: 1,30 x D:0,90 x H:1,90m Machine can be demonstrated under power. i.D. * Kodpsu Icguofx Amtolw

Condition: excellent (used), mileage: 810,840 km, power: 552 kW (750.51 HP), first registration: 02/2020, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 8x6, wheelbase: 4,900 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 11,500 kg, loading space length: 8,640 mm, loading space width: 2,500 mm, loading space height: 2,800 mm, Year of construction: 2020, Equipment: AdBlue, central locking, electric window regulation, onboard computer, retarder, soot filter, tail-lift, = Additional options and equipment = - Aluminum fuel tank - Cab - Refrigerator - Air suspension - Particulate filter - Sun visor flap Kljdpjy Ryiyefx Amtsw = Remarks = Volvo FH16.750 XL 8x4*4 - Carrier Supra 1150 MT - Bi Temp - Retarder - Tail lift - Bussbygg box body MY: 12-2-2020 KM: 810,840 YV2R0P0G4LA857570 Box dimensions: 863 - 250 - 280 Carrier Supra 1150 U MT - Bi Temp Tail lift Retarder Full air suspension Rear steering axle = Further information = Technical information Number of cylinders: 6 Unladen weight: 15,745 kg Transmission Transmission: I-Shift, 12-speed, automatic Axle configuration Suspension: air suspension Front axle 1: Tire size: 385/65R22.5; Max. axle load: 9,000 kg; Steered; Left tire tread: 50%; Right tire tread: 50% Front axle 2: Tire size: 315/70R22.5; Twin tires; Max. axle load: 11,500 kg; Left inner tread: 50%; Left outer tread: 50%; Right inner tread: 50%; Right outer tread: 50% Rear axle 1: Tire size: 315/70R22.5; Twin tires; Max. axle load: 11,500 kg; Left inner tread: 50%; Left outer tread: 50%; Right inner tread: 50%; Right outer tread: 50% Rear axle 2: Tire size: 385/55R22.5; Max. axle load: 8,000 kg; Steered; Left tire tread: 50%; Right tire tread: 50% Functionality Tail lift: rear liftgate Body make: Carrier Supra 1150 U MT Condition Technical condition: good Visual condition: good

Condition: used, Z-conveyor, conveyor belt with metal slat belt GÖSSLING Metal belt conveyor, belt conveyor, stationary conveyor Machine No.: 15867 Year of manufacture: 2005 Usable length: 3100 mm Belt width: 400 mm Frame profile height: 70 mm Insertion width: 465 mm Lower insertion length: approx. 1500 mm Conveyor incline length: approx. 800 mm Upper discharge belt length: approx. 600 mm Height offset: approx. 170 mm Belt speed: approx. 22 m/min. Conveying height - discharge height: approx. 1220 to 1390 mm Insertion height: approx. 1050 to 1270 mm Belt drive motor output: approx. 0.37 kW Klodpfx Ajwvv Rwsmtsw Power supply: 400 Volt, 50 Hz - Metal slat chain made of stainless steel - Belt drive via NORD gear motor - Robust sheet steel construction - Height adjustable via hydraulic lift in the base - Mobile on fixed castors Required floor space L x W x H: 3160 x 750 x ... mm Weight: 420 kg Good condition

Condition: good (used), travel distance X-axis: 12,000 mm, travel distance Y-axis: 7,300 mm, travel distance Z-axis: 3,000 mm, total length: 30,000 mm, table length: 12,000 mm, table width: 4,730 mm, total width: 12,000 mm, total height: 10,475 mm, table load: 250,000 kg, overall weight: 400,000 kg, Make : Waldrich - Siegen - Typ : PF-F-150(1)-530/400 - No. : 11.093/0 - Age : Overhault 2004 ( Euro 2.2 Mil) X Travel : 12.000 - Y Travel : 7.300 - Z Travel : 3.000 - W Travel : 4.000 - Between column : 5.000 - Table width : 4.730 - Table length : 12.000 - Table load : 19 t / mtr. Ca. 250 ton - Table feed : 10.000 mm/min. - W axis : 3.000 mm/min. - T axis : 6.000 mm/min. - Cross adj. milling head : - Vert. adj. cross rail : - Horizontal hydrostatic spindle ram Kedpeytrxkefx Amtjlw - Milling spindle Ø : 560 - Milling tool taper : iso 60 - C axis feed : 5.000 mm/min. - Milling motor : 90 kW - Spindle speed : 2.500 R/pm - Z axis stroke : 3.000 - Z axis feed : 2.000 mm/min. - Milling Küma Angle head WF2 90 kw- 450 - Milling Küma Uni. UB1D 60 kw - 2400 - Milling Küma Fixed GB1D 90 kw- 2400 - Milling Küma Angle head WF1? - Electric requirement : 3 x 400 V / 50 Hz - Power requirement : 600 kVA / 630 Amp - Capacity 4.000 L coolant true spindle 20/40 Bar Machine is rebuild in 2004 by Schiess Bed – Table assembly group: * Renewal of sliding lining * Grinding of guideway * Renewal of table drive * Direct linear measuring syst. * Hydrostatic Portal and cross rail: * Modification of adjusting spindle trape Zoidal spindle was recplaced with ball screw * Direct linear measuring syst. * New drive motors for relization of higer speed on feed axes of milling support. * New milling support with hydrostatic guideways Electric system: * Complet elctric cabinet switchgear * Complet new wire * Siemens Sinumrik 840 D in 6 axis !! Equipment / parts : * Complet new raumag janich covers * Complet new double chip conveyor * Complet with big tooling packet * Complet with big mounting equipment - Under power in Europe - Free directly - Controlled axis X / Y / Z / W / C / B axis - Over all height : 10.475 mm - Over all width : 11.934 mm - Over all length : 30.000 mm - Total weight : ca. 400.000 Kg Rebuild in 2004 for EUR 2.200.000 !This CNC Waldrich Portal milling machines was used in the Energie Field for steam turbien case machining. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, bore 50 mm length 310 mm Kljdpeyz Dftefx Amtjw knife system Centrolock circle diameter 150 mm number of blades 4 Z Two planing heads Weinig type 531 150 01 498 including a batch of untested knives.

Condition: new, *Technical standard specification: Unit type: 6/150 Heating capacity: 6 kW Cooling capacity: 45 kW (Performance data at 80°C flow temperature and 15°C cooling water temperature and a pressure difference between cooling water inlet and outlet of at least 2 bar) Medium: water up to 150°C Maximum external volume: 9 ltr at 150°C *Functional equipment: - Cooling and filling controlled via solenoid valve - Automatic filling via cooling water - Level monitoring by magnetic float switch - Dirt filter in return flow of circulation and cooling water inflow - Reversing circuit for leakage stop operation (usable up to system closing temp.) - Ball valve in flow & return - Automatic temperature-dependent system closure - Filling time monitoring and aquatimer - Adjustable pump overrun - Adjustable temperature alarm - Options: Interface cable - Regulation and control unit SBCmini, with relay for common alarm, 230V, on rear of controller on terminal block - Heating control SSR - Control box IP54 - Interface 20mA TTY; pin assignment Arburg - Cekon plug 16A - Corrosion-resistant components (VA,MS) - Unit mounted on castors, two of them steerable with brake - Additional temperature fuse for safe shutdown of the heating on heating contactor - Bypass between flow and return with reduced cross-section *Pump: Type: Y2051 Delivery rate (max) 27 ltr/min Delivery pressure (max) 4.5 bar Motor power 0.5 kW Type of submersible pump / peripheral impeller *Dimensions/Weights/Colours Dimensions L/W/H: 600 mm x 240 mm x 493 mm (without connection) Weight: approx. 43 kg Colour: Housing: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections: Circulation medium socket G1/2" Ksdpfxefnvwqe Amtjlw cooling water socket G3/8" *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: reconditioned (used), Year of construction: 2002, Multicomponent Arburg IMM (Horizontal & Vertical) Clamping force 100 tons. Year 2002. Machine will be delivered RE-Conditioned (full checked tested and operate) Ask us for our service of Start Up with Warranty of working condition. Technical details CLAMPING FORCE 1000 kN Kljdpfx Aep Audqjmtjw SCREW DIAMETER Horizontal bimetalic 25mm SCREW DIAMETER Vertical 18mm INJECTION PRESSURE 2500 BAR INJECTION VOLUMEN horizontal 54gr INJECTION VOLUMEN Vertical 20gr DISTANCE BETWEEN TIE BARS (h x v) 420x420mm MIN. MOULD HIGHT 250mm DAYLIGHT MAX 750mm WORKING HOURS 79.115 YEAR OF BUILDING 2002

Condition: ready for operation (used), Year of construction: 2003, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 190332, clamping force: 1,000 kN, injection weight: 15 g, ejector force: 66,000 N, ejector stroke: 225 mm, plate length: 795 mm, No reserve price – guaranteed sale to the highest bidder! Auction of a 3-color injection molding machine! TECHNICAL DETAILS Clamping force: 1,000 kN Tie bar spacing: 420 x 420 mm Mounting platens: 795 x 795 mm Mold height: 300 mm Maximum platen distance: 950 mm Ejector stroke: 225 mm Ejector force: 66 kN Injection Unit 1 (150 series) Screw diameter: 15 mm Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,750 bar Injection Unit 2 (150 series) Screw diameter: 15 mm Kedpfxoy Hki Ao Amtjlw Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,750 bar Injection Unit 3 (60 series) Screw diameter: 15 mm (high abrasion resistant) Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,080 bar MACHINE DETAILS Control system: Selogica Clamping unit: hydraulic Operating hours: 21,200 h FEATURES 1 vertical injection unit, mounted on supports for the 2nd injection unit instead of on the clamping unit tie bars, manually operated, working position adjustable between 70 and 250 mm 2 x core pull Open nozzle 15 mm wear-resistant, without heating band (1st injection unit 150) Technology level 2 – servo-regulated hydraulic system with two variable displacement pumps Technology level 3 hydraulic system with three variable displacement pumps for simultaneous movements Heating band for open nozzle Injection unit 150 for vertical injection into the mold parting line for 2-component processing Position-regulated screw with control valve on the injection unit, including regulated back pressure Position-regulated screw with control valve for multi-component machines – for injection unit 2 Injection unit 60 for horizontal injection into the mold parting line as the 3rd injection unit For VE 906/00, injection unit 60 in L-position: unit lowered by 70 mm Plasticizing cylinder assembly 15 mm (without nozzle), with advanced feed and pressure reducing valve Open nozzle 15 mm wear-resistant, without heating band (L-position) Nozzle tip with radius 15 (L-position) Heating band for open nozzle (L-position) Position-regulated screw for the third injection unit Documentation/manual

Condition: excellent (used), mileage: 292,400 km, power: 66 kW (89.73 HP), first registration: 09/2010, fuel type: diesel, fuel: diesel, color: white, gearing type: mechanical, emission class: euro4, number of seats: 2, Year of construction: 2010, Engine displacement: 1,461 cc Unladen weight: 1,343 kg Payload: 400 kg Gross vehicle weight: 1,743 kg Technical condition: very good Optical condition: very good Please contact Thierry Leemans for further information. Kledoygdm Hjpfx Amtjw