Used Planscheibe Faceplate for sale (633)

Condition: like new (used), functionality: fully functional, 3-axis positioning system, rotating, lifting, and pivoting, 7500 kg load capacity. Condition: absolutely like new, only used for measurement purposes. Position can be set using limit switches. Includes hand-held remote control. Faceplate diameter: 1000 mm. Faceplate speed: 1 RPM, including speed controller. Torque: 5500 Nm. Maximum turning radius: 1700 mm. Tilting range: +/- 180° relative to the horizontal faceplate. Tilting moment: 14500 Nm. Tilting speed: 180°/min. Tilting axis: 200 mm above the upper edge of the faceplate. Hfodpfezyx Nbox Aqgsn Lifting speed: 1000 mm/min. Lower faceplate height: 500 mm. Upper faceplate height: approx. 2000 mm. Includes complete documentation, plans, operating instructions, and EC declaration of conformity. New price: approx. €75,000.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, 5-axis Milling Machining Centre | Brand: MATEC | Type: 30 HV Year of manufacture: 06/2008 Range of components: Steel, cast and welded structures. The large X-axis and the head, which can be swivelled through 105° in either direction, are ideal for multi-sided machining of long profiles or shafts. The machine can be inspected under power by appointment. Condition: In working order / ready for use. Operating hours ((September 7, 2026): Control on: 76.085 h Machine on: 62.198 h Program run: 26.653 h TECHNICAL SPECIFICATIONS Travels: - X-axis: 3.000 mm - Y-axis: 800 mm - Z-axis: 1.100 mm - A-axis: +/- 105° - B-axis: 360° - 1-axis NC swivel head, swivels through +/- 105 degrees - Speed range: 20 - 9.000 rpm - Drive power of motor spindle increased: 30 kW * Torque max.: 190 Nm * Boring capacity in steel: ca. 60 mm * Milling capacity: approx. 500 cm3 * Thread cutting: M30 SPECIFICATIONS: - CNC control system: HEIDENHAIN iTNC 530 Hjdpfxszyy Rms Aqgefn - NC rotary table, brand: KESSLER, embedded in the machine table, SKH-NC 6/800 * Horizontal faceplate,diameter: 800 mm * Direct measurement system for the NC rotary table * Part accuracy: : +/- 12" * Load capacity max.: 2,5 tons * Tangential torque with clamping: max. 6.500 Nm, incl. motor (AC) with integrated rotary measuring system, hydraulic clamping and incl. additional CNC axis - Clamping plate: Width / length: 835 / 3.500 mm Number of T-slots: 7 Slot width: 18-H8 - Amperemeter for the main spindle drive - Tool magazine: 48 positions - Additional tool magazine: 48 positions, including tool changer, specialised software and control panel for loading tools whilst the machine is running in automatic mode - Working area: * Rapid speed: 30 m/min * Feed rate: 30.000 mm/min - Spindle: * Cone/tool holder: SK40, DIN 69871 * Rotational speed: 9.000 / 30 kW - Internal coolant supply 40 bar (paper belt filter, tank capacity: 450 l) - High coolant pressure at the external nozzles High-pressure coolant pump, switchable via the M function in the parts programme to the external nozzles on the headstock, 20 bar. - Coolant supply flow monitor - Compressed air through the tool - Centralised oil lubrication - Oil mist extraction system - Direct measurement system: X, Y and Z axes - 3D measuring probe, brand: RENISHAW RMP 60, with radio signal transmission for control, including control software - Tool breakage detection - Tool length measurement - Fully enclosed work area with a roof; a completely enclosed work area. The loading doors are designed in such a way that loading by crane is possible at any time whilst they are open. - Safety fence fitted to the machine - Stronger linear guides for the Y-axis = 800 mm X = size 65, Y + Z = size 55 - Bellows with steel vanes - Rinsing gun - Electronic handwheel (portable), brand: HEIDENHAIN HR 410 - Chip conveyor - Workstation lighting (2-light) - Extraction system - Safety/machine guard glasses are being replaced - Compressed air refrigeration dryers - Documentation - CE marking Special features: - Zero-point clamping system - Swiveling head - The CNC rotary table, in combination with the swivel head, enables 5-sided or 3D machining of workpieces The sale does not include any clamping devices. Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale -

Condition: excellent (used), functionality: fully functional, turning diameter over cross slide: 215 mm, spindle bore: 41 mm, turning diameter over bed slide: 380 mm, turning length: 1,000 mm, total length: 2,900 mm, total width: 1,050 mm, total height: 1,410 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 30 rpm, overall weight: 2,000 kg, Equipment: rotational speed infinitely variable, The lathe underwent a general overhaul in 2011 by M-MOOS spol. s.r.o. During the overhaul, it was fitted with an Omron Varispeed 7 frequency converter for convenient speed regulation during operation and to reduce current surges. The lathe's accessories include: a fixed and a movable steady rest, a faceplate, 2 chucks, a clamping angle, a rotating center for the tailstock (Morse 4), a micrometric stop for longitudinal and transverse feed, 1 coolant system with a pump, and an operating manual. Technical parameters: swing over bed 380 mm, swing over carriage 215 mm, distance between centers 1000 mm, bed width 340 mm, spindle bore 41 mm, spindle taper metric 50, tailstock center taper MORSE 4, spindle speed range 30 - 2800 rpm, main DC motor power 10 kW, maximum machine dimensions: length: 2900 mm, width 1050 mm, height 1410 mm, machine weight 2000 kg. The overhauled lathe was used for maintenance purposes by a large manufacturing company. The machine can be tested in our warehouse in Přerov by appointment. Hfjdpfezy Shwox Aqgjn

Condition: used, Year of construction: 2000, centre height 400 mm centre distance 3.000 mm max. swing over bed 810 mm max. swing over facing slide 510 mm max. swing-dia. in gap 850 mm control WEILER max. workpiece weight 3.800 kg spindle diameter in front bearing 150 mm spindle bore 106 mm faceplate diameter 630 mm worktool system Parat tailstock quill taper MT 6 dia. of quill 115 mm spindle turning speed range 1 - 1.800 U/min Lathe - cycle-controlled | WEILER - E80 x 3000 equipped with 630mm faceplate, 400mm SCHUNK ROTA-S plus chuck, boring bar attachment, PARAT tool system as well as a chip conveyor. A comprehensive tool package is included in the scope of delivery. The machine video from the production plant will be shared on request. Hfsdpfx Aqjy Ty Ihjgsn The machine is in good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: E-80 | E 80 | E80 x 3000 | E80x3000 | E 80 x 3000

Condition: good (used), Center height: 1,000 mm Distance between centers: 15,600 mm Maximum diameter allowed above the bed: 2,019 mm Maximum diameter allowed above the carriage: 1,625 mm Diameter of the faceplate: 1,800 mm Maximum clamping between chucks: 1,500 mm Maximum load: 75 tons Spindle motor power: 82 Approximate dimensions: Length = 21,570 mm, Width = 4,765 mm Accelerated carriage travel: 2,000 mm/min Metric thread possibilities: from 2 to 25 mm Maximum thread length: 800 mm Minimum distance from faceplate to tool: 2,000 mm Accessories: 2 faceplates with a diameter of 1,100 mm on a traveling steady rest Hfodpfx Aqjzbt S Iegen 2 steady rests, 150 to 450 mm 2 steady rests, 450 to 750 mm 2 steady rests, 750 to 1,000 mm (on a traveling steady rest) Videos available.

Condition: good (used), Year of construction: 1990, Control system: Siemens 840-C Hfjdozadagopfx Aqgon Faceplate diameter: 1800 mm Swinging diameter: 2000 mm Maximum turning height: 1100 mm (below tool) Table speed: 130 RPM Workpiece weight: 8000 kg Tool changer: 12 positions

Condition: ready for operation (used), functionality: fully functional, CNC FLOOR TYPE BORING MACHINE MAKE TITAN MOD. AF 150 SPINDLE SIZE 150MM, ISO 50 X TRAVEL 3000MM Y TRAVEL 2000MM W TRAVEL 800MM ROTARY TABLE 2000 X 1700 MM ROTRARY TABLE TRAVEL 1000MM LOADING CAPACITY ON TABLE 15 TON Hfjdpfsztq Ayjx Aqgon CNC NUM

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: YS-2674, turning height: 1,250 mm, workpiece weight (max.): 5,000 kg, turning diameter: 1,600 mm, faceplate diameter: 1,250 mm, controller model: Fanuc 0i-TD, TECHNICAL DETAILS Faceplate diameter: 1,250 mm Max. torque on faceplate: 12,500 Nm Turning height: 1,250 mm Max. turning diameter: 1,600 mm Max. workpiece weight: 5,000 kg Table speed: 2 - 300 rpm Hfedpfx Aozb Uy Toqgsn Travel range X-axis: 1,475 mm Travel range Z-axis: 900 mm Rapid traverse: 10 m/min Spindle taper: ISO BT50 Number of tool positions: 12 MACHINE DETAILS Control system: Fanuc 0i-TD Total power: 75 kW Dimensions & Weight Footprint: approx. 4.7 x 5.8 x 5.5 m Machine weight: approx. 32 t EQUIPMENT Tool changer magazine for 12 turning tools with BT 50 shank Note: The €5,000 for dismantling and loading applies to the preparation for EU transport. Preparation for sea transport is possible; costs upon request.

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 600 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 460 mm, total height: 2,770 mm, table load: 500 kg, overall weight: 5,200 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 30, tool weight: 8,000 g, number of axes: 4, This 4-axis MORI SEIKI SV-400 was manufactured in 1998. It features a table size of 900 × 500 mm and impressive travels of 600 mm in the X-axis, 430 mm in the Y-axis, and 460 mm in the Z-axis. The machine includes a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 30 stations. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI SV-400 vertical machining centre we have for sale. Contact us for further details. • Table: 900 × 500 mm; 4 T-slots (18 mm width × 100 mm pitch) • Number of axes: 4 (X, Y, Z + 4th rotary axis; 4th axis supplied by accessory listed below) • Distance spindle nose to table: 150–610 mm • Spindle: max; 22 / 18.5 kW motor; 85 mm front bearing ID • Tool magazine: max tool Ø 80 mm (adjacent) / 125 mm (non-adjacent); max tool length 300 mm; chip-to-chip 3.2 s • Feedrates: Rapid X/Y/Z 32,000 mm/min; max working feed 16,000 mm/min • Axis motor power: X/Y 2.1 kW; Z 4.4 kW • CNC control: MORI-FANUC MSC-501 (compatible with MSC-518); memory 320 m; functions include helical interpolation and cutting force control (Power Monitor) • Coolant system: 50 bar high-pressure through-spindle coolant (TSC) • Features: air blow for part cleaning, full enclosure, end-of-cycle lamp, RS-232 interface • Floor space: 2,200 × 2,550 mm • Electrical: total installed power 50.2 kVA; 380 V, 50 Hz Additional equipment Hfedpfsy Uxigox Aqgen • 4th axis attachment: Tsudakoma RN-150R rotary table with 200 mm faceplate and tailstock • Chip management: 2× rear-discharge chip conveyors Technical Specification Taper Size BT 40

Condition: excellent (used), Year of construction: 1963, Maximum height: 100 mm Distance between centers: 500 mm Grinding wheel diameter: 300 mm Hodpfezxqt Nox Aqgsfn Maximum grinding wheel speed: 2,825 min-1 Grinding head can be rotated 90° to the left and right Maximum workpiece speed: 750 min-1 Spindle taper MK 4 Tailstock 3-jaw grinding chuck 125 mm Faceplate 160 mm ER 40 collet chuck with 28-piece collet set Fixed center Grinding wheel flange with grinding wheel Wet grinding device

Condition: ready for operation (used), A CNC vertical lathe Jungenthal is available. Gear stages: 2, max. speed: 160rpm, max. workpiece height: 800mm, chuck jaws: 6, faceplate diameter: 2000mm, motor power: 50kW, control: Siemens Sinumerik 840D. Documentation available. An on-site inspection is possible. Hfsdpfx Aezcyqgeqgsn

Year of construction: 2018, condition: ready for operation (used), A Krewema CNC large-format semi-frontal lathe is available. X/Z travel: 1500mm/850mm, center height: 475mm, distance between centers base/bed extended: 1685mm/2685mm, max. turning diameter over bed/cross slide: 935mm/620mm, max. swing diameter in the gap: 1600mm, main spindle bore: 155mm, tailstock quill diameter: 140mm, quill taper: MK6, quill stroke: 300mm, tool turret: Sauter, tool stations: 4, 3-jaw chuck diameter: 630mm, faceplate: Schunk, faceplate diameter: 1000mm, control: Siemens 840D sl ShopMill. Including coolant system, external coolant nozzles and chip conveyor. Documentation available. An on-site inspection is possible. Hsdpfjzp Rgkox Aqgjfn

Condition: used, Year of construction: 1995, turning diameter 1020 mm turning length 4000 mm turning diameter over slide 720 mm control Siemens type 805 tailstock quill taper MT 6 transmission ratio 2 bed width 560 mm spindle bore 200 mm faceplate 1000 mm make Forkhardt PSA 1000 3 jaw chuck Forckrath 500 mm steady 263 mm steady 500 mm dimensions of the machine ca. 7,4x2,5x2,5 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Hsdpjyqvd Sefx Aqgjfn About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1962, turning diameter over bed 1250 mm turning diameter over slide rest 1250 mm turning length 9000 mm faceplate 1300 mm 3-jaw chuck 500 mm centre distance 10.000 mm bed width 850 mm turning dia. in gap 1600 mm steady 810 mm steady 410 mm steady 470 mm total power requirement 54 kW weight of the machine ca. 33 t Multifix steel holder with inserts The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Hfjdsyqvg Tepfx Aqgon About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, turning diameter over bed 440 mm turning diameter over slide rest 240 mm turning length 1500 mm spindle bore 55 mm faceplate 550 mm steady 140 turning speeds 40-1800 U/min digital readout Haidenhain bed width 340 mm Hfjdpeyqvhqjfx Aqgon steady 140 mm 3-jaw chuck 250 mm No. 62 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1994, faceplate diameter 1250 mm swing diameter 1400 mm turning height 1500 mm Control Siemens type 880T Table load 6000 kg cross rail - adjustment 700 mm Max ram stroke 1000 mm turning speeds 400 U/min transmission ratio 2 Feed 3-8000 mm/min total power requirement 69 kW The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale Hjdpfxoyqvu Ds Aqgefn apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1987, turning diameter over bed 1100 mm turning diameter over slide rest 780 mm turning length 4100 mm Control Siemens type 840 D bed width 710 mm Hjdpfx Aqoyqvvbegofn faceplate 1000 mm turning speeds 1110 U/min total power requirement 4,79-69 kW weight of the machine ca. 14 t Machine has been overhauled No.: The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1989, turning diameter over bed 1000 mm turning diameter over slide rest 760 mm turning length 6000 mm spindle bore 82 mm turning speeds 4,5-900 U/min faceplate 1000 mm 3-jaw chuck 500 mm total power requirement 22 kW weight of the machine ca. 10 t dimensions of the machine ca. 8x2x1,8 m Multifix steel holder with inserts The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Hfedpfx Asyqv Uwsqgjn If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 1985, machine/vehicle number: 5028830, Offer 26070 Technical Data: - Max. load capacity in horizontal position: 7500 kg - Faceplate dimensions: 1500 x 1500 mm - Motorized tilting of the faceplate: 0 – 120° - Rotational movement electrically adjustable, stepless: 0.0028 – 1.04 rpm - Right and left rotation - Welding current transmission: approx. 500 A - Drive: 400 V x 25 kW - Table height in horizontal position: approx. 1600 mm Hfedpoyrfxbofx Aqgon - Handheld remote control - Required space approx. W 2000 x H 1600 x D 2450 mm - Weight approx. 5500 kg

Condition: used, Year of construction: 2015, faceplate diameter 1250 mm swing diameter 1500 mm turning height 1250 mm Control Siemens type 840 Dsl tool taper 4 Pos. The machine was overhauled in 2015 by Matuschek. Siemens 840 DSL Shop Turn The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Hodeyqr S Espfx Aqgsfn If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Faceplate, faceplate chuck, four-jaw chuck, face turning chuck -Faceplate: Chuck size Ø 560 mm -Bolt circle: Ø 170 mm -Through hole: Ø 90 mm -Reference: Short cone 8 (Ø 136-139 mm) -Dimensions: Ø 560 x 200 mm Hodpex R R R Iefx Aqgefn -Weight: 77.3 kg

Condition: ready for operation (used), Year of construction: 1976, functionality: fully functional, turning length: 5,000 mm, turning diameter: 1,550 mm, Turning diameter: 1,550 mm Distance between centers: 7,000 mm Faceplate: 0.63 to 63 rpm Hfsdpfxsx Sdqqs Aqgjn Max. workpiece weight: 50 t Machine weight: approx. 80 t

Condition: new, Year of construction: 2026, NEW MACHINE TECHNICAL DATA: Working diameter 1600mm Max. workpiece height 1000mm Max. workpiece weight 6300kg Face plate diameter 1400mm Face plate rotation speed 0-200rpm Max. torque on face plate 25000Nm Performance of main drive 75kW SETTINGS: -5-fold turret or quill support -Zentral lubrication SKF/VOGEL -2 step main gear -24 month warranty -complete electrical installation 230/400V,50Hz, Made-in-Germany, CE-Norm OPTIONS: -Capto tool holder system -tool magazine -machine housing -chip conveyor -cooling water preparation -Side support -... Hedpsd I Au Rsfx Aqgofn CONTROL: CNC Fagor / Siemens OTHER: Geometrical-acceptance according DIN8609

Condition: used, Two-jaw chuck, 2 jaw chucks, vice, face plate Hfedpfx Asd R Ew Ujqgsn -Chuck size: Ø 200 mm -Hole circle: Ø 175 mm -Weight: 21 kg

Condition: good (used), Year of construction: 1982, functionality: fully functional, Single-column vertical turning lathe | Dörries VCE 1400 The machine was overhauled in 2010 by Hering, has recently been cleaned, and is in good condition. - Table diameter: 1,000 mm - Swing diameter: 1,400 mm - Turning height: 1,100 mm - Siemens CNC control type 840 D Shop Turn - Tool changer - X-axis travel: 2,000 mm - Z-axis travel: 700 mm - Slide adjustment: 1,000 mm - Rapid traverse: 6,000 mm/min - Spindle speed: 500 rpm - Handwheel - Total power requirement: 62 kW Inspection possible at any time by appointment. Hsdpfx Asyft Nneqgefn #Tags: Doerries | VCE1400 | Dörries VCE