Used Potisje Parallel Lathe for sale (6,204)

Condition: used, Mechanic lathe LESTO Scintilla (Switzerland), model GD 1124 CR Machine no. 6T 7868, year of manufacture approx. 1975 Electrical problems with the capacitor motor Drive power: 0.44 kW Mains connection: 230 volts, 50 Hz - Fixed steady rest - Collets - Faceplate Space required L x W x H: 1100 x 500 x 400 mm Weight: approx. 90 kg Good condition - Electrical problems with the capacitor motor Nsdpsz Ek Rxofx Agrsdb

Condition: excellent (used), TECHNICAL CHARACTERISTICS Capacity: Chuck diameter: 3.000 mm Maximum turning diameter: 3.110 mm Maximum piece weight: 20 Tn Revolutions: 1,5-39,5 Rpm Main motor power: 45 Kw Movable crossbeam: 1.200 mm Height under crossbeam: 1.800 mm Ndjdor Ddu Depfx Agrsb Vertical lathe with two arms: Right carriage pentagonal turret 5 positions with automatic rotation X travel: 1,500 mm Z travel: 965 mm Left slide with RAM Travel X: 1.500 mm Travel Z: 1,200 mm Remarks: Independent control panel 2 x CNC Fagor 8055 for the control of the 2 slides from the same screen. Grinding head (optional) Year of manufacture/reconstruction: 1975/2001

Condition: used, Colchester Triumph 2000 Gap Bed Centre Lathe with Acu-rite III 2 Axis DRO, Swing Over Bed 400mm Diameter, Distance between Centres 1300mm, 250mm 3 Jaw Chuck, Spindle 25 - 2000rpm, 3 Position QCTP. S/No. 6/0044/28919 Ndedpfxsz Aqwco Agrob Location: These lots are located in Andover, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Lot 12 of Auction 3500 - Ending Wednesday 30th September 2026 at 3pm (UK Time)

Condition: good (used), spindle bore: 260 mm, spindle speed (max.): 900 rpm, travel distance X-axis: 3,200 mm, total height: 3,409 mm, total length: 9,800 mm, total width: 3,609 mm, feed length Z-axis: 530 mm, overall weight: 34,000 kg, CNC Lathe with c-axis Okuma - LU-45M SuperBigBore MACH-ID 9778 Njdpfeztctqsx Agrsdb Make: Okuma Type: LU-45M SuperBigBore Control: OSP-P200L X-Axis: 3200mm Z-Axis: 530mm Spindle bore:260mm Speedrange: 900Rpm Length: 9800mm Width: 3609mm Height: 3409mm Weight: 34000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), total width: 800 mm, total height: 1,500 mm, total length: 1,400 mm, steady rest CNC Lathe VDF Wohlenberg - U1270 MACH-ID 9187 Make: VDF Wohlenberg Type: U1270 Ndjdpfxozcn Sre Agrjb Length:1400mm Width:800mm Height:1500mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Manufacturer Scherer Feinbau Type VDZ 220 DS Year of manufacture 2010 Control Siemens Technical data Chuck diameter mm 315 Drive power (100%ED) kW 37.7 Torque (100%ED) Nm 300 Max. speed rpm 5500 X-stroke mm 625 Y-stroke mm +100/-80 Z-stroke mm 250 Tool system VDI 30+40 Spindle interface A6 Ndsdpevu R I Njfx Agrjb

Condition: excellent (used), Year of construction: 1979, Manufacturer: Weiler Type: Commador II L+Z lathe Year of manufacture: 1979 L x W x H: approx. 2500 x 1200 x 1800 mm Weight: approx. 1500 kg Technical data: Max. turning diameter over bed: approx. Ø 380 mm Max. turning diameter over cross slide: approx. Ø 190 mm Max. turning length: approx. 1000 mm Bar passage: approx. Ø 56 mm Spindle: Speed range: approx. 25 – 2000 rpm Spindle nose: A 2 – 6 Drive power: approx. 4.0 kW Automatic longitudinal and facing feeds: Nedpfolp Ircjx Agrodb Feed range: approx. 0.026 – 1.253 mm/rev Suitable for threads: – metric 0.35 – 12 mm – inch 44 – 2 TPI – diametral – pitch threads 88 – 5 DP – module 0.2 – 4 Tailstock: MK 4 Without tool holder

Condition: used, Year of construction: 2011, Citizen Miyano ABX-64SY Fixed Headstock Lathe 9 Axis Machine with Fanuc Series 31i Model A CNC Control, Twin Spindle Hainbuch Collet Chucks, Twin 12 Position Tool Turrets All Driven, Max Work Piece Diameter 64mm, Main Spindle 40 - 4000rpm, Sub Spindle 50 - 5000rpm, Parts Catcher & Conveyor, Yoshida Swarf Conveyor. S/No. 4SSY0135 (2011) 9,300kg, Iemca Master 865 Verso 5 Meter Barfeed. S/No. 02111465A03 (2011). Country of Origin: Japan, (2) x Boxes of Driven & Static Tooling for ABX64. Country of Origin: Italy Location: These lots are located in Biggleswade, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser Ndedpfez Arp Hox Agrjb

Condition: used, Year of construction: 2017, Citizen Miyano BNA-42MSY2 Fixed Headstock Lathe 7 Axis Machine with Cincom/Citizen CNC Control, Twin Spindle Collet Chucks, 8 Position Tool Turret all Driven, Max Work Piece Diameter 42mm, Main Spindle Speed 50 - 5000rpm, Sub Spindle 50 - 5000rpm, Parts Catcher & Conveyor, LNS Turbo MH500 Swarf Conveyor. S/No. DL0110 (08/2017) 3000kg, Iemca Boss 552-HD 5 meter Barfeed. S/No. 021805GA03 (2018). Selection of Driven & Static Tooling for BNA42. Country of Origin: Japan Ndedpez Arncofx Agrsb Location: These lots are located in Biggleswade, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: used, Year of construction: 2020, Star SB-20R Type G CNC Sliding Head Lathe with Fanuc Series Oi-TF CNC Control, 5 Axis Machine, Twin Spindle Collet Chucks, 16 Tool Positions, up to 7 Turning Tool Positions, 4 Sleeve Tool Positions, 5 Driven Tool Positions, (5 Spindle Cross Drilling Unit ER11/16 0M151), 20mm Max Work Piece Diameter, Main Spindle Speed 10,000rpm, Sub Spindle Speed 9000rpm, Fire Trace Automatic Fire Suppressant System, Parts Catcher & Conveyor. S/No. 7009 (0374) (2020), 1750kg with FMB Micromag 20 6 meter Barfeed. Country of Origin: Japan Ndodez Armxepfx Agrjb Location: These lots are located in Biggleswade, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: used, Year of construction: 2001, turning diameter 400 mm turning length 549 mm control HEIDENHAIN Eltropilot swing over bed 570 mm travel -x axis 220 mm travel -z axis 635 mm main spindle bore 79 mm main spindle speed 25 - 5000 U/min main spindle drive 21 kW max. torque on the spindle max. 240 Nm 120 mm c-axis, speed 100 U/min C-axis Haltemoment 200 Nm C-axis resolution < 0,04 ° sub spindle bore 56 mm sub spindle speed 25 - 5000 U/min sub spindle drive 9 kW max. torque on the spindle max. 72 Nm 90 mm c-axis, speed 100 U/min C-axis Haltemoment 150 Nm C-axis resolution < 0,04 ° feed power X/Z axis 3,5 / 7 Nm rapid traverse X-axis 20 m/min Ndsdpjz Ekzwsfx Agreb rapid traverse Z-axis 24 m/min tool turret 1 x 12 Stationen number of driven tool stations 12 speed of driven tools 4.000 U/min total power requirement 44 kVA Accessories: collet fixture HAINBUCH on main spindle, 3-jaw chuck RÖHM, 140 mmø, on sub spindle, 3 collets, chip conveyor, coolant with band filter device

Condition: excellent (used), functionality: fully functional, Weiler Primus LZ/G, machine number 2679, in excellent condition, with draw and lead screw. Includes 3 chuck jaws 125mm, tool holder, and 4x Multifix AD2090 tool holders. Can be inspected and tested while powered on. Nsdpfx Agoz Eqn Djrodb

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Traub CNC turning machine TNA480, TX8D, year of manufacture 1990, serial number 607. Servo C-axis, reinforced rotary tool drive, 1 turret VDI40, tailstock, chip conveyor, 3-jaw chuck KNCS315, ID090090. Main drive with 2 gear stages. A8 spindle with hollow clamping cylinder Röhm SZS 86/169, ID 416530. Additional accessories, tool holders, chucks available upon request. Includes ATC optics, spare parts catalog, wiring diagram, tool holder catalog. Very good condition, operational, can be inspected while running. Machine geometry has been checked and corrected/adjusted, and a test run has been performed. Scraper + belt + drive sprocket, belt checked and replaced, maintenance performed at 4000 hours. Ndodpfx Aoz Eqh Degrob Technically very good condition, guideways, spindle bearings in very good condition. Videos available upon request.

Condition: excellent (used), functionality: fully functional, Weiler high-precision lathe, model Condor 81, center lathe with 3-axis digital display from K&C, NEW. Technical specifications: >> Year of manufacture: 1982, Machine no. 82 016 >> Center height: 165 mm >> Center distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle head, DIN 55027, size 5, with bayonet lock >> Tailstock: MK 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm Ndodpez Ehzzofx Agrob >> Weight: approx. 1100 kg >> Spindle brake: can be engaged >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and equipment: >> 3-axis digital display from K&C, new, 12 months manufacturer's warranty, with operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 items, taper calculation, radius/diameter, quick zeros, switching of the counting direction >> 1 three-jaw chuck, 160mm, 1 set of jaws >> Mulifix size B with 1 steel holder >> Change gears >> Electronic spindle protection >> Back panel >> Coolant system >> Machine feet At an additional cost: Collet chuck system, new, and collets, new, from 3 to 26 mm in 1 mm increments. About the machine: Offered is a used Weiler Condor 81 in very good condition. It comes from a training center and has been well maintained. The machine is fully functional, of course. It is a very robust and powerful machine. The new 3-axis digital display from K&C makes the work even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test this machine on-site while it is powered up.

Condition: refurbished (used), Year of construction: 2007, operating hours: 5,000 h, functionality: fully functional, Fully equipped machine IMECA BOSS 32 L edger Turning tool holder included 6 fully overhauled motorized tools New tool drive gearbox. New Y-axis, motor, and ball screw. Clamping and guiding device provided with the machine New edger channel Ndedpfezic Ruex Agrob 380 V / 220 V transformer included

Condition: good (used), Year of construction: 2000, functionality: fully functional, Very robust lathe with a rigid machine bed. L + Z hollow spindle lathe Manufacturer: Grutzpe Model: 2000 / 500 Super AT Turning diameter: 1000 mm Distance between centers: 530 mm Hollow spindle diameter: 140 mm Distance between centers above the compound slide: 530 mm Nedpsz D Dt Djfx Agrodb Turning length: 2000 mm Bed width: 420 mm Chuck diameter: 315 mm Bridge Dimensions: 6500 x 2200 x 2000 mm Weight: 10,000 kg Accessories: Various Further details: see images

Condition: excellent (used), Schaublin 102N – Precision Lathe For sale is a Schaublin 102N precision lathe, a high-quality Swiss machine tool known for its accuracy and robust design. This machine is particularly suitable for precise turning operations, small-series production, model making, tool making, and general precision engineering. Technical Data Manufacturer: Schaublin, Switzerland Model: 102N Machine Type: Precision Lathe Design: Lead and feed screw lathe Center Height: approx. 102 mm Center Distance: depends on the model Spindle Mount: Schaublin-specific design Njdpfx Aoz Eqgmegrsdb Spindle Bore: depends on the installed spindle Speed Range: depends on the motor and belt configuration Drive: Electric motor Rotation Direction: Right/Left, if equipped accordingly Mounting: Workbench/subframe mounting Accessories: - Collet chuck system including a set of collets The machine is in very good condition and operates perfectly.

Condition: used, TECHNICAL DETAILS - Number of axes : 6 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 4 [mm] - Max. machining length : 40 [mm] - Travel : 40 [mm] - Spindle speeds : 20000 [rpm] - Spindle power : 1.1 [kW] - C axis indexing precision : .0001 [°] COUNTER-SPINDLE - Max. bar diameter : 4 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 0.5 [kW] - C axis indexing precision : 1 [°] GUIDE BUSH HOLDER 1 - Number of positions : 5 GUIDE BUSH HOLDER 2 - Number of positions : 4 - Number of motorized positions : 2 - Live tools speed : 8000 [rpm] END ATTACHMENT - Number of positions : 3 Nsdpfx Agsz Eldtorodb SECONDARY OPERATION - Number of positions : 3 POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 4 [kW] WEIGHT & DIMENSIONS - Machine floor space : 1265 x 560 [mm] - Machine height : 1450 [mm] - Machine weight : 950 [kg] EQUIPMENT - CNC : Fanuc 18iTB - Parts catcher - Parts conveying strip - Ejection of workpiece - Coolant tank - Bar loader : LNS TRYTON 107 CNC - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer

Condition: used, TECHNICAL DETAILS - Number of axes : 6 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 7 [mm] - Max. machining length : 40 [mm] - Travel : 40 [mm] - Spindle speeds : 16000 [rpm] - Spindle power : 1.1 [kW] - C axis indexing precision : 0.0001 [°] COUNTER-SPINDLE - Max. bar diameter : 7 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 0.5 [kW] - C axis indexing precision : 1 [°] GUIDE BUSH HOLDER 1 - Number of positions : 5 Ndodpjz Eldmefx Agrjb - Number of motorized positions : 2 - Live tools speed : 8000 [rpm] GUIDE BUSH HOLDER 2 - Number of positions : 2 END ATTACHMENT - Number of positions : 3 SECONDARY OPERATION - Number of positions : 3 POWER SUPPLY - Total installed power : 4 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 1265/560 [mm] - Machine height : 1450 [mm] - Machine weight : 950 [kg] EQUIPMENT - CNC : Fanuc 18iTB - 3 colors status lamp - Rotating guide bush - Parts catcher - Ejection of workpiece - Coolant tank - Bar loader : LNS TRYTON 107 - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer

Condition: used, Thread-cutting gears, number of teeth: 30, 57, 60, 105, 120, 127, equipment: lead screw for thread cutting, separate feed system, automatic longitudinal and cross feed, change gear for feed and thread gearbox, back gear in the headstock, three-jaw chuck, cross slide and compound slide, four-way tool post, tailstock, an on-site inspection is possible. Nsdjz Ea Srjpfx Agrjdb

Condition: used, Year of construction: 2007, greates pass round over bed 650 mm Swing dia. over traverse guideway 420 mm Distance between centres 2.000 mm control Sinumerik Siemens slide travel X-axis 440 mm slide travel Z-axis 2.000 mm turning speed range - main spindle 1 - 3.000 min/-1 power capacity - main spindel 33 / 27 / 22 kW transmission ratio 2 spindle diameter in front bearing 140 mm spindle bore 106 mm standard chuck diameter 250 - 400 mm spindle head DIN 55026 / A8 turret head 12 pos. turning tool - shaft cross cut 32 x 32 mm rapid traverse X: 5 m/min rapid traverse Z: 10 m/min feed range X: 0,001 - 1.000 mm/min feed range Z: 0,001 - 2.000 mm/min power feed coss 9.000 N power feed longitudinal 12.000 N diameter of quill 100 mm quill travel 200 mm taper of center MK 6 total power requirement 38 kW weight of the machine ca. 6,0 t dimensions of the machine ca. 6,0 x 2,5 x 2,0 m CNC - Lathe DMT KERN - CD 650 / 2000 - only 3,446 operating hours - incl. boring bar with holder for cross slide - incl. face plate 600 mm - incl. traveling steady rest max. 160 mm - incl. fixed steady rest max. 160 mm - incl. fixed steady rest max. 250 mm (not pictured) - incl. fixed steady rest max. 350 mm (not pictured) - incl. spare parts package Ndedpfx Aszp Rvljgrjb - NO additional tools included

Condition: used, Pneumatic pick and place manipulator, loading unit similar to a SCARA robot with a parallel gripper. Handling device, handling system, pick-up gripper, loading gripper for automation. Horizontal axis with guide cylinder, linear module type SM 32/150 (column module GEMOTEC). Vertical axis with guide cylinder, linear module type SM 20/060 (column module GEMOTEC). Parallel gripper type GMP 20. Load capacity: max. 2 kg. Horizontal movement: 150 mm (pneumatic). Nodpfx Asz D Hxiogredb Vertical movement: 60 mm (pneumatic). Vertical adjustment on the two support columns: 435 mm (manual, with clamping). Support columns, vertical guide column: Ø 45 mm. Guide column, linear module type SM 32/150: Ø 20 mm. Guide column, linear module type SM 20/060: Ø 12 mm. Mounting foot: 180 x 75 mm. - Can be moved pneumatically in two axes. - Part gripper, parallel gripper type GMP 20 (65 x 35 mm). Space requirement L x W x H: 550 x 160 x 550 mm. Weight: 17 kg. Very good condition. Various manipulators available, see our webshop.

Condition: used, Year of construction: 2019, Technical details: bar material dia.: 38 mm turning length: 350 mm turning speeds: 7.000 / 7.000 U/min number of tools: 30 (3 x 10) driven tools: ja / yes control: FANUC 31i-B5 rapid traverse: 30 m/min total power requirement: 10,5 kVA weight of the machine ca.: 6,5 t dimensions of the machine ca.: 2,50 x 1,45 x 1,75 plus Lademagazin m work piece power: 4 kW toolpiece turning speed range: 5.700 1/min Accerories main spindle power 11 kW sub spindle power 7,5 kW CNC sliding headstock machine STAR ST 38, 3 turrets, 12 CNC Axis (X1/Z1/Y1/C1/X2/Z2/Y2/YA2/C2/X3/Z3/Y3, Fireextinguisher KRAFT und BAUER FB 703, partscatcher and conveyor belt (for long parts), LTA oilmist suction, chiller for oil, machining with oil as coolant, reading hours: approx. 14.500 hours "machine on", approx. 4.100 hours "machining" Nsdpfx Agsmu Rtusrsdb *

Condition: good (used), Year of construction: 2004, functionality: fully functional, VMC300 D with 4-axis capability. Ndedpfez Ehp Eox Agrsb

Condition: good (used), Year of construction: 2000, functionality: fully functional, ET 332 MC with LM800. Njdoz Ehnbopfx Agrjdb