Used Psg Rsd Ii 8 for sale (36,794)

Condition: refurbished (used), DKV III Throughfeed Press with Brake Unit Refurbished Available either with original hydraulic motors or converted to servo motors Options: - Chain threading device - Traveling cross-cut saw Function: For pressing finger joints without stops (in continuous operation). The upper and lower plate chains provide feed force. Following brake plates transfer the required longitudinal press force to the wood via friction. Advantages: - High output despite relatively slow feed rates - Absolutely no vertical finger offset at the joints Technology: Heavy-duty 2" plate chain, pneumatically lift/lowerable Floating brake elements Pressing force measurement via contact manometer Height adjustment electric Maximum pressing force adjustable and dependent on feed speed and wood cross-section, 4500 daN at 32 m/min 2200 daN at 70 m/min Feed speed adjustable 10-70 m/min Drive power Feed unit adjustment 1 kW Brake adjustment 1 kW Hydraulic motors 45 kW Technical data: Iijdpfx Aov T Aqyob Neb Wood width 90 - 180 mm Wood thickness 20 - 80 mm Thickness-width ratio 6:10 Wood cross-section for 15/16.5 mm fingers max. 90 cm²

Condition: used, functionality: fully functional, Year of construction: 2019, machine/vehicle number: 2426658, load capacity: 408 kg, lifting height: 6,100 mm, platform length: 2,130 mm, platform width: 710 mm, overall weight: 1,594 kg, transport length: 2,320 mm, transport width: 840 mm, transport height: 1,730 mm, fuel type: electric, tire size: 16x5x12, color: red, Technical Data Iiodpfx Aoyqy Rieb Njb Year of manufacture: 2019 Working height: 8.10 m Platform height: 6.10 m Platform extension: 0.91 m Platform dimensions (L x W): 2.13 m x 0.71 m Overall dimensions (L x W x H): 2.32 m x 0.84 m x 2.15 m Load capacity: 408 kg Load capacity with load distribution: 272 kg Travel speed: 1.1 - 3.2 km/h Total weight: 1,594 kg Drive: electric 2WD Gradeability: 30% Turning radius (outside): 2.74 m Tyres: solid rubber UVV, fully functional, general signs of use.

Year of construction: 1988, condition: excellent (used), machine/vehicle number: TRHE, 1 Demag wall jib crane 250 KG payload / lifting capacity 5 units available, lengths 1x5 - 1x5.8 - 1x6 - 2x7m Iodsmqf I Eopfx Ab Noib Price from 1950 for a 5m crane, 250Kg payload with steel chain hoist payload 250 + 500Kg Weight including wall bracket approx. 350 Kg Complete with wall brackets, boom, chain hoist, cable drag, chassis and small parts Swivel range 270° Item location is 75053 Gondelsheim System is completely dismantled and immediately available See pictures Used condition Shipping by freight forwarder or collection Please enquire about shipping costs according to postcode

Condition: used, mileage: 439,057 km, power: 320 kW (435.08 HP), first registration: 06/2011, fuel type: diesel, overall weight: 35,000 kg, tire size: 315/80R22.5, axle configuration: 8x4, wheelbase: 4,500 mm, brakes: engine braking, color: green, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 2, Equipment: air conditioning, cabin, differential lock, trailer coupling, Vehicle location: Belgium 1, sleeper cab, 1 comfort seat, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, 16-speed gearbox, differential lock, rotating beacon, leaf suspension, trailer coupling (air & light connection), foldable underrun protection, green environmental sticker. Wheelbase: 4500 mm. Disc brakes on front and rear axles, 50 mm trailer coupling! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to change, interim sale and errors reserved! Iedoyg N Uvepfx Ab Nsib

Condition: new, For sale: electric motor from the renowned manufacturer ATB Motorentechnik GmbH, made in Germany. Model CD160M-4, explosion-proof ATEX II 2G version, suitable for inverter operation. Technical data: • Power: 11 kW • Type: CD160M-4 • Voltage: 400 V Δ / 690 V Y • Current: 21 A / 12.1 A • Frequency: 50 Hz • Speed: 1460 min⁻¹ (4-pole) • Cos φ: 0.85 • Insulation class: F • Protection rating: IP55 • Weight: 168 kg • Year of manufacture: 2007 • ATEX: II 2G EEx de IIC T4 – motor for areas with explosive gas hazard • Shaft: diameter 42 mm, splined. Iedpfxexbd U Es Ab Noib

Condition: reconditioned (used), Year of construction: 2018, STORK VS 24/8 Monobloc Bottling Line, fully refurbished by the professional company Z.M. ROBAK. The machine is virtually unused, with the protective film still on the housing. Currently, it is set up for filling glass containers – it has been test run for bottling alcohol. Filling valves: 24 pcs (with light vacuum for still beverages) Capping heads: 8 pcs (configured for aluminum screw caps) Output: approx. 7,000 bph (700 ml) Capable of operating with bottles of the following dimensions (after format adjustment): - Diameter: 45 mm to 110 mm - Height: 105 mm to 400 mm Iodsu Nhiqspfx Ab Noib - Standard neck diameter: 28 mm - Optional neck diameter (after format change): 18 mm to 43 mm Machine dimensions: - Width: 2,900 mm - Height: 2,200 mm - Depth: 2,200 mm Weight: 3,200 kg Installed power: 5.5 kW Required air pressure: 0.6 MPa Year of manufacture/modernization: 2018 – has not been used in production since refurbishment Condition: The machine is practically as new, with negligible signs of use. The machine comes with original electrical documentation.

Condition: new, total length: 2,440 mm, total width: 590 mm, total height: 12 mm, We offer you OSB boards as Grade II selection. (The boards are only sold in packages. Individual boards cannot be purchased.) Scope of delivery includes: - OSB boards, Grade II - Article number: OSB10 - Total length: 2,440 mm Iisdpfxsxxrhnj Ab Neb - Total width: 590 mm - Thickness: 12 mm - Board size in m²: approx. 1.44 m² - Total m² per package: approx. 216 m² - Design: with tongue and groove - Quantity per package: 150 pieces - Base price per m²: €5.04 Note: This is a special lot of Grade II boards; the OSB boards may show damages. Your contacts in our company: Mr. Falk Deutsch Mr. Mario Klöver Mr. Andre Evering General information about this item: This item is available for collection only. If transport or shipping of this item is required, it will incur additional costs, which can be requested from us individually depending on the place of delivery and the required quantity.

Condition: excellent (used), Year of construction: 2008, X/Y/Z travel: 900 x 400 x 200 mm Table size: 800 x 400 mm Iodpfx Aev Irwreb Njib

Condition: new, Long lathe with a maximum of 29 tools to optimize machine efficiency for complex parts. The XIII series is equipped with a counter tool system that contains a maximum of 14 driven tools for high productivity when machining complex parts. The use of guide bushes allows longer parts to be turned, while machines without guide bushes are ideal for machining short parts and cold drawn material. - Max. Machining diameter: 20/32/38/45 mm - Max. Machining length: 270/120 mm - Axles: 11 SA20XIII - Max. Machining diameter: 20 - Max. Machining length: 270 mm - Axles: 11 SA32XIII - Max. Machining diameter: 32 - Max. Machining length: 270 - Axles: 11 Iiodpfx Absg Ncd Ts Neb SA38XIII - Max. Machining diameter: 38 - Max. Machining length: 270 - Axles: 11 SA45XII - Max. Machining diameter: 45 - Max. Machining length: 120 - Axles: 11

Condition: new, Year of construction: 2026, Hybrid long lathe with 6 axes for demanding turned parts! Cross machining on the back with face machining and turning operations for efficient machining. Powerful cutting, precise machining with removable guide bush system. - Max. Machining diameter: 20/26/32/38 mm - Max. Machining length: 250/160 mm - Axes: 7/8 (Y2 axis) - Tools: max. 27 SA20PII - Max. Machining diameter: 20 - Max. Machining length: 250 mm - axes: 7 - Tools: 23 SA26PII - Max. Machining diameter: 20 - Max. Machining length: 190 N: 60 - Axes: 7 + Y1 - Tools: 27 SA26PII - Max. Machining diameter: 26 - Max. Machining length: 250 - axes: 7 - Tools: 20 SA26PYII - Max. Machining diameter: 26 - Max. Machining length: 190 N: 60 - Axes: 7 + Y1 - Tools: 25 SA32PII - Max. Machining diameter: 32 - Max. Machining length: 250 - axes: 7 Iiodpjg Ncc Sofx Ab Nsb - Tools: 20 SA32PYII - Max. Machining diameter: 32 - Max. Machining length: 190 N: 80 - Axes: 7 + Y1 - Tools: 25 SA38PII - Max. Machining diameter: 38 - Max. Machining length: 250 - axes: 7 - Tools: 19 SA38PYII - Max. Machining diameter: 38 - Max. Machining length: 190 N: 80 - Axes: 7 + Y1 - Tools: 24

Condition: used, Module milling cutter Module 8 20 degrees Length 1800 mm Iijdpfx Aedklt Neb Nob Diameter 120 mm inside 40 mm

Condition: used, Hotrunner controlunit PSG 12 12 units 230 Volt Isdpfx Aowgb Treb Njib price: 2.850 € contact: Mr. Rainer Eckerle

Condition: used, functionality: fully functional, rotational speed (max.): 90 rpm, Electrovariable electric motor 1.8kw, 3.2-90 1/min Manufacturer: Getriebebau NORD 32-RV30-90 L/8-2 BRE16 Power: 0.45/1.80 kw Voltage: 230/400 V 50Hz 0.31A Rotation: 3.2-90 1/min IP44 Shaft diameter: 40mm Iijdpfxoud H Sds Ab Nsb Weight: 50kg Gearbox: Manufacturer: Getriebebau NORD Type: 90L/8-2 BRE16 IP54

Condition: excellent (used), Year of construction: 2005, power: 225 kW (305.91 HP), fuel type: diesel, type of cooling: water, Regularly maintained Volvo Diesel fire water pump for sale in new condition Machine hours: 298 inspection and oil change at all maintenance intervals, regardless of use. Manufacturer: Kagema DPA Iiodpohfl Dmsfx Ab Nsb Engine: Volvo Penta TWD 710 V 218 kW / 296 HP 6-cylinder diesel engine Data: Manufacturer: Volvo Penta Type: TWD 710 V. Spec.NO .: 868725 Serial number: 2071093240 Vermogen: 225 kW / 304hp Speed: 2450 rpm Fuel: diesel Length: 330 cm Width: 120 cm Height: 220 cm tank: 400liter water transport ca: 800-900m3 6.5 bar pressure water pump type: KSR-MXN 150-315 "missing" Purchase of industrial equipment and machinery. Wide Range of Used Machinery, Industrial Equipment

Condition: excellent (used), load capacity: 10,000 kg, Equipment: foot remote control, WELDING TURNTABLE, TURNTABLE, TEHAG 10 TON KT 10,000 KG Machine type: Welding turntable, turntable Manufacturer: Tehag 10 Ton Condition: good (used) Ijdpfjw D Ri Rex Ab Neib Tilted load capacity: 8,000 kg at a load center of 700 mm With remote control Infinitely variable speed from 0.01 to approx. 1.1 rpm Height tilted to center: 1.1 m without rail / 1.3 m with rail Height horizontal: 1.5 m without rail / 1.7 m with rail Length: 2.5 m without rail / 3.25 m with rail Width: 2.0 m Rail can be removed

Condition: excellent (used), Vötsch Type: VC³ 4018/S Vötsch VC³ 4018/S Climate Test Chamber – Li-Ion CO/CO₂ −42 to +150 °C 400 V Air-cooled For sale is a temperature and climate test chamber from the renowned German manufacturer Vötsch Industrietechnik GmbH, model VC³ 4018/S, year of manufacture 2012. The unit is specifically equipped for testing lithium-ion batteries and features CO monitoring as well as CO₂ inertization for enhanced operational safety. Important Note: Due to these safety features, the test chamber is software-limited to a temperature range of −42 °C to +150 °C. The chamber is ideally suited for: Isdpfx Absx Slm Ho Nsib - Li-Ion battery testing - Electronics and assembly testing - Temperature and climate stress tests - Development and quality assurance tasks Technical Data: Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm External dimensions: Width 870 mm x Depth 1550 mm x Height 1800 mm Test chamber volume: 190 liters Feed-throughs included as standard: R1: Ø 125 mm L1: Ø 50 mm Data for temperature tests: Temperature range: -42°C to +150°C Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature uniformity: ± 0.5 to ± 1.5 K Temperature change rate: Heating 4 K/min Cooling 4 K/min Max. heat compensation: 2300 W Data for climate tests: Temperature range: +10 to +95 °C Dew point range: -3 to +94 °C Humidity range: 10 to 98 % RH Temporal temperature deviation: ± 0.1 to ± 0.3 K Spatial temperature uniformity: ± 0.5 to ± 1.0 K Temporal humidity deviation: ± 1 to ± 3 % RH Heat compensation: 400 W Operating data: Test chamber lighting: Halogen bulb 2 x 24V, 50W 3/N/PE AC 400V ±10% 50 Hz Rated power: 4.1 kW Rated current: 14 A Refrigerant: R-404A Weight: 470 kg Important Safety Information for Buyers! The following servicing steps are performed on our offered chambers in advance: 1. Function check and replacement of necessary components 2. If required, new refill with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers undergo a documented test run. Condition: Used Scope of delivery: (See image) (Specifications and technical data are subject to change and errors are excepted!) If you have further questions, we are happy to assist you by phone.

Condition: good (used), Centrifugal pump, acid pump, caustic pump, water pump for groundwater lowering pump -Manufacturer: DIGEP Diósgyor Maschinenfabrik, centrifugal pump type DP-AMIIV -Engine: Evig 2.2 kW -Performance: 14 l/s / 840 l/min / 50.4 m³/h -Delivery height: 8 m -Pipe connection input: Ø 100 mm Iisdev Ai Epjpfx Ab Nsb -Pipe connection output: Ø 75 mm -Dimensions: 580/290/H380 mm -Weight: 83 kg

Condition: good (used), Forklift battery charger, industrial charger, forklift battery charger, industrial charger, Si rectifier -Manufacturer: Oldham, charger type High Power III 36-80 -Input voltage: 220/380V 50Hz -Power: 36 V / 80 A -Dimensions: 555/410/H790 mm -Weight: 66 kg Isdpfxsq Dr Ske Ab Neib

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, machine/vehicle number: MIKAOG1+2, 1 Demag KBK II wall-mounted slewing jib crane, 80 kg safe working load / lifting capacity Ijdpfjx U Nqbjx Ab Noib Crane available 2x! Jib length 3m, 80 kg capacity With Demag DC chain hoist, 80 kg capacity Weight incl. wall bracket approx. 150 kg Complete with chain hoist, festoon system, trolley, and small parts Slewing range 270° Item location is 75053 Gondelsheim Unit is completely dismantled and immediately available Shipping via freight forwarder or collection Please inquire about shipping costs based on ZIP code

Year of construction: 1984, condition: used, machine/vehicle number: 20020312-313, DEMAG KBK 2 crane canopy Crane runway dimensions approx. 24m x 8.5m other lengths and widths possible, please inquire ! Iodpfjttq H Hex Ab Njib Payload / lifting capacity 500 KG - 0,5to Technical data of the system: Crane runway made of Demag KBK2 rails with internal power supply and 3 travel drives System is supplied complete: KBK rails, rail connectors, trolleys, end plates, brackets/hangers etc. incl. Demag PK 500KG chain hoist + 3 travel drives (new DRF200) Lifting height approx. 5m Crane is disassembled and immediately available 2x available ! Used condition, see pictures Item location is 75053 Gondelsheim Shipping by freight forwarder or pickup only by appointment Demag KBK1 KBK2 and KBK3 tracks are stock items ! Other KBK installations are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with lifting capacity and dimensions.

Condition: used, Year of construction: 2010, The machine has recently undergone service. Machine may need following repairs: A damaged guide rail clamping the PCB was observed. Iiodpfx Aox Tv Rxjb Neb Transport belts are in poor condition. Mirrors in the camera module need to be cleaned before calibration. Software version Si 8.60 may require an update. Otherwise it is operational.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Description WE SELL AN STUNNING NICE CONDITION CNC BIGLIA WITH TOOLS AND ACCESSORIESS CONDITION IS AS ALMOST NEW. VERY LITLLE USED. FANUC SERIES 18-T Maximum turning diameter: 520 mm Maximum turning length: 500 mm Bar turning diameter: 80mm X axis travel: 210 + 5 Z axis travel: 500 + 10 Spindle speed: 4000 rpm Spindle motor: 11-15 Kw (50%) Iedpfx Absvk Ezcj Noib Spindle connection: ASA 6 Spindle hole: 80 mm Self-centering diameter: 250 mm Turret: number 12 stations Tailstock: CM 4 Dimensions: 3500 x 1670 x 1650 mm Weight: 4600 Kg HOLE TROUGH SPINDLE: 82 m YEAR:1997

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, WE OFFER NICE CONDITION AMADA PRESS BRAKE CNC MACHINE WE CAN ALSO DELIVER TO THE CUSTOMER WORKSHOP-FACTORY TECHNICAL DATA pressure 100 t chamfer lenght 3000 mm distance between columns 2700 mm Control AMADA AMNC II-PC throat 415 mm stroke 200 mm dayligth 500 mm adjustment of the rear stops 600 mm table width 60 mm Iijdpfjvnzvdex Ab Neb number of controlled axis 7 ajustment speed 200 mm/sec bending speed 20 mm/sec POWER 5,3 kW WEIGHT 6,7 t DIMANSIONS:

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Specifications Manufacturer HARDINGE Model HARDINGE TWIN SPINDLE LATHE QUEST 8/51 Year 2002 Description 2002 HARDINGE QUEST 8/51 CNC SUB SPINDLE, DRIVEN TOOLING LATHE WITH GE FANUC SERIES 16I-T CONTROL 150mm Dia 3 Jaw Power Chuck. Collet Chuck Sub Spindle, 12 Station Turret. Quantity Of Static & Driven Holders. Iiedpfjvk E Ddox Ab Neb S/No. QC-28 (2002).

Condition: ready for operation (used), Siemens 6AV7892-0BD30-0AB0 Simatik HMI IPC677C (Panel PC) 15" Touch Industrial PS , SN: VPC9852976 , serial no. according to photo ,used, good condition, 100% functional, scope of delivery according to photos Iijdpfx Aboi Edhfo Njb