Used Railcar 30 Tons for sale (29,259)

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 01/2005, total length: 9,520 mm, total width: 2,480 mm, wheelbase: 7,170 mm, color: other, Year of construction: 2005, Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Pjdpfx Amozvbdgoxsgt Rear axle 3: Max. axle load: 9000 kg Empty weight: 4.280 kg Carrying capacity: 34.720 kg GVW: 39.000 kg Registration number: OH-53-TT

Condition: used, Year of construction: 2008, functionality: unexamined, cooling capacity: 8 kW (10.88 HP), type of input current: three-phase, type of cooling: water, input voltage: 400 V, power: 5 kW (6.80 HP), input frequency: 50 Hz, Equipment: compressor, cooling unit, For sale: INTECO industrial chiller, model RM30, manufactured in 2008 (serial number 13423), installed and serviced by FRIAZ – Frio Industrial de Azeméis, Lda. Water cooling unit with a cooling capacity of 8 kW, electrical power of 5 kW, and three-phase power supply (3 x 400V / 380V, 50 Hz). Operates with R407C refrigerant (8 kg charge) and includes a dedicated RM30 control panel with indicators for start/stop and alarms (HP, SA, TAH, RT, RR). Structure made of painted sheet metal (white/blue), with compressor and heat exchanger visible through a panel with a protective grille. Pgodpozvdgkjfx Amxet Condition: it was in normal operation until approximately 2 months ago, when it was taken out of service. It has not been tested since then. It shows normal signs of wear and tear for its age and installation period.

Condition: refurbished (used), functionality: fully functional, inspected and tested Pgedpfxozvfaro Amxjt

Condition: new, functionality: fully functional, Year of construction: 2026, fuel type: electric, front tire type: cushion tires (non-marking), rear tire type: cushion tires (non-marking), total width: 2,150 mm, Equipment: CE marking, New electric forklift Voltforce 2 ton | 4.5 meters | Side shift + fork positioner New electric forklift from Voltforce, available for immediate delivery from stock. A very complete and powerful machine with maintenance-free batteries, side shift, and fork positioner. Ideal for warehouses, workshops, logistics, and daily professional use. Specifications • Lifting capacity: 2000 kg • Lifting height: 4.5 meters • Brand: Volt Force • Type: CPD-20 • Electric • 60 Volt system • Maintenance-free battery • Including battery charger • Charging via 230 Volts • Intermittent charging possible • Operating time approximately 5–6 hours • Side shift • Fork positioner • Solid rubber tires • Compact model – only 1.20 m wide • Mast height 2.15 m • Travel speed 14 km/h • Very maneuverable and smooth driving performance • Good lighting + work lights • Reverse alarm + blue light • Turn signals and brake lights • CE certified • Available in other colors and weight classes upon request • 2-year manufacturer's warranty Why choose this Voltforce? - Maintenance-free technology - Low operating costs Pgedpfxeztpwio Amxet - Suitable for indoor and outdoor use - Easy charging via a standard power outlet - Excellent price-quality ratio - Good service - Immediately ready for use Price 2 Ton electric forklift € 9,500 excl. VAT Price 2.5 Ton electric forklift € 9,750 excl. VAT Fast delivery Transportation is possible upon request. For more information or to arrange a viewing, please send an email or contact us.

Condition: excellent (used), Year of construction: 2024, operating hours: 667 h, lifting height: 3,400 mm, fuel type: diesel, mast type: triplex, power: 37 kW (50.31 HP), motor manufacturer: Kubota, fork length: 1,200 mm, total height: 1,990 mm, total length: 3,150 mm, total width: 1,480 mm, color: other, Empty weight: 4.438 kg Engine type: Kubota D1803 CRT E5B Lifting capacity: 3.000 kg CE mark: yes Technical condition: very good Visual appearance: very good = Additional options and accessories = Pgsdpfjzuyraox Amxst - 3rd hydr. circuit - Pallet forks - Side shift - Work lamp(s) = Remarks = Drivetrain Stage / Tier: Stage V / Tier V General Country of production: Frankrijk

Condition: used, Year of construction: 1975, functionality: fully functional, machine/vehicle number: 3033647, load capacity: 3,000 kg, TREPEL - 2 scissor lift tables, type CL 30/16 Serial no. 3033647, year of manufacture 1975 Load capacity 3000 kg Each table is equipped with transport rollers and additional transport rollers are included (loose). Pgedpfxozx E Nfs Amxot

Condition: as good as new (ex-display), Year of construction: 2024, New hydraulic heating plate press Manufacturer: ITALPRESSE, Type XL/6 30-13 with gold-anodized plates Touch display control - Electric heating plates, 3,000 x 1,300 mm - Total pressure: 90 tons - Number of heating plates: 2 pcs. - Number of tiers: 1 pc. - Cylinder stroke: 350 mm - Tier opening: 350 mm - All-side loading - Number of pressure cylinders: 6 pcs. - Diameter of pressure cylinders: 85 mm - Power requirement of hydraulic unit: 3 kW - Electric heating plates made of solid, hard aluminum with built-in heating wires - Heating power: 22 kW - High-pressure insulation plates - Working temperature: 90° C - Max. temperature: 120° C - Operating voltage: 400 V/50 Hz - Safety regulations according to CE standard Standard equipment: - Movement of the press table with rack and pinion and parallel guides at 2 corners of the press table, made of self-lubricating material - Electronic control unit with touch screen for controlling and monitoring the machine - Digital timer for setting the pressing time and automatic opening - Digital input and monitoring of the pressing pressure - Digital timer for setting the pressing time - Digital diagnostics and display of error messages - Safety circuit with two-hand operation - Safety pull cord - Safety bracket for the lower press table Psdpfxodx R Tfo Amxjgt Integrated accessories: - Touch screen TS/400 - EFC Electronic flatness control - Gold-anodized heating plates (bus bars) Location: In stock at 54634 Bitburg - Immediately available -

Condition: like new (used), functionality: fully functional, number of rollers: 4, roller (bottom) diameter: 660 mm, roller (top) diameter: 660 mm, side roll diameter: 525 mm, working width: 3,050 mm, sheet thickness (max.): 60 mm, overall weight: 113,000 kg, total length: 6,500 mm, total width: 5,200 mm, total height: 4,250 mm, Equipment: documentation/manual, HYDRAULICS Pgjdpfx Aswrnkhjmxjt Useful length mm 3050 Thickness mm 60 Upper roller diameter mm 660 Lower roller diameter mm 660 Side roller diameter mm 525 Lower roller movement mm 110 Bending roller movement mm 465 Approx. weight kg 113,000 USED MACHINE OVERHAULED

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, Aspo Load capacity: 30,000 kg Maximum belt width: 2,000 mm Minimum belt width: 400 mm Maximum coil diameter: 1,850 mm Podpfjzy Un Hex Amxjgt Minimum diameter: 900 mm

Condition: used, Vertical machining center ideal for the production of kitchen doors, for pantographing, drilling, cutting and insertion of highly flexible hardware. Vertical machining allows this series of machines to be able to be flexible and productive at a very high quality level. In addition, the automatic loader and the automatic return / rotation of the panel make it completely automated. • TPA machine programming and control system with Windows based PC - Computer, keyboard and mouse - 15 "monitor - CD-ROM The production line consists of the following machines: 1. Motorized comb multi-position introduction transfer - Length 2000 mm 2. Vertical machining center Bremen Vektor - Automatic introduction by motorized chain and vertical pressure rollers for fixing the piece during the processing - Automatic working height adjustment by C.N. - N ° 1 horizontal drilling unit for the hole to insert the stop - N ° 1 drilling head with 7 horizontal spindles in X and 16 vertical spindles in Y - N ° 1 pantograph with automatic revolver tool change with 8 positions Pgjdpfx Amjux Si Hoxst 3. Motorized panel handling / return transfer with 180 ° rotation and sliding on THK guides - Length 2500 mm 4. Vertical machining center Bremen Vektor - Automatic introduction by motorized chain and vertical pressure rollers for fixing the piece during the processing - Automatic working height adjustment by C.N. - N ° 5 storage tanks and introduction of hinges / bumpers / tie rods 6. Motorized transfer for the exit and movement of the panel from vertical to horizontal towards the operator - Length 2000 mm 7. Motorized belt transfer for panel return to the operator • Perimeter protection grids

Condition: used, functionality: unexamined, Ferwood Code: AGG0053 - Manufacturer Code: 9405A0566 - Condition: Used - Functionality: Not tested - Compatible Machine: CNC BIESSE - If interested, we offer a refurbishment service; please contact us. Pgodpfx Amezmicxoxet

Condition: used, Year of construction: 2009, Numerical control POWER CONTROL PC 22 Machine suitable for 1st + 2nd passage of the panel Mobile shoulder opening motorized by N.C. mm 3000 Maximum panel height mm 60 PVC-ABS edge thickness mm 3 Feed speed mt/min 40 Feed speed with rounders mt/min 20 Motorized pressure rubber belt Bearing track with retractable pin (distance between pins mm 500) Squaring part composed of: Anti-adhesive group Timed automatic anti-splinter group Double shredder group Free space for any group addition Gluing unit with pre-melter and glue pot Automatic adjustment of the edge pressure rollers Edge holder magazine with 2 positions Trimming unit with two motors Overlapped trimming unit Pedpfx Amspp Tkfexogt FK rounding unit Edge scraper unit Glue scraper group Brush group Anti-adhesive group

Condition: used, Panel turning device used for loading and unloading panels. Working dimensions: * Maximum panel width: 1300 mm. * Maximum panel length: 3200 mm. Pgsdsrzhfpepfx Amxot * Rotation system: double cone. * Direction of rotation: from transverse to longitudinal This device is commonly used in the wood and furniture industry to facilitate the movement of panels during processing. If you have any further questions or need further details, please don't hesitate to ask!

Condition: good (used), Year of construction: 2011, operating hours: 8,239 h, load capacity: 3,000 kg, lifting height: 5,390 mm, fuel type: electric, mast type: triplex, construction height: 2,500 mm, empty load weight: 5,700 kg, mileage: 8,239 km, TRIPLEX forklift, brand STILL Year of manufacture: 2011 Capacity: 3,000 kg Lifting height: 5,390 mm Equipped with a FREELIFT Equipped with a SIDESHIFT and FORK SPREADER Pgodpfxezaaw Io Amxet Mast height: 2,500 mm 8,239 hours on the meter Battery replaced in 2021, equipped with an external charger and automatic filling system Video to follow.

Condition: used, Year of construction: 2003, - Workpiece length: 800 - 3000 mm - Workpiece width: 350 - 1400 mm - Workpiece thickness: max. 70 mm with edge / max. 80 mm for milling - Main spindle 12 kW - Tool changer, 18-position CNC machining center Manufacturer: Homag Type: PROFI BAZ20/30/16/V/D Year of manufacture: 2003 Technical data Homatic - CNC control CNC programming system WOODWOP Postprocessor Workpiece dimensions - Workpiece length: 800 - 3000 mm - Workpiece width: 350 - 1400 mm - Workpiece thickness: max. 70 mm with edge / max. 80 mm for milling - Edge band width: min. 120 mm - Weight: max. 150 kg Throughfeed table - Longitudinal console 1, fixed installation - Longitudinal console 2, manually adjustable via width adjustment in the Y-direction - 8 vacuum clamps 125 x 50 x 100 mm - Working height, bottom edge of workpiece: 950 mm Motor, width adjustment, longitudinal console, traversing table - For different workpiece widths via servo drive for throughfeed table - Per longitudinal console Chip conveyor - Chip and waste disposal via integrated chip conveyor under the longitudinal traverse Pgedpozux Tpjfx Amxjt Stop pins for top layer overhang - Stop pins with lifting-rotating mechanism for workpieces with max. 20 mm top layer overhang - Individually selectable, end position monitored, stroke 110 mm - For manual placement of doors Vacuum pump 100/140 m3/h Unit for positioning the vacuum clamps - Mounted on the unit carrier with pneumatic extension console - For max. 4 vacuum clamps per longitudinal console Main spindle 12 kW - Tool holder HSK F63 - Extraction system for all tools and units - Three-phase asynchronous motor 12 kW at S1, water-cooled - Tool weight: max 6 kg incl. holder - Tool length: max. 200 mm from the motor spindle bottom edge - Tool diameter: max. 180 mm for milling tools / max 200 mm for sanding tools - Frequency converter: 15 kW - Speed range: 1500 - 18000 rpm, stepless, programmable - Full rated power from 12000 rpm Unit interface for the main spindle - For connecting the machining units - Pneumatic and swivel drive interface - C-axis with torque transmission and 3-point support Tool changer, 18-position For tools and units with HSK F63 Tool weight: 6 kg Tool length: max. 200 mm from the motor spindle bottom edge The following tool and unit configurations are possible - 18 x max. 130 mm - 9 x max. 180 mm and 9 x max. 70 mm - Tool diameter max. 200 mm for sanding tools - Tool changer can be raised for a moving pick-up station on the left side Drilling/milling unit, 4 spindles, for tool changer - For automatic changing in the main spindle - Collet holder ER25 up to max. 16 mm shank diameter - Tool protrusion max. 50 mm - Speed: max. 13500 rpm - Standard collet 10 mm - Infinitely swiveling via the C-axis - Without tool Lock case milling unit, 2 spindles, D=16/20 - With integrated blow-out nozzle - Two-sided spindle outlet with counter-rotating direction - Speed: 12000 rpm - Infinitely swiveling via the C-axis - Without tool 1x Weldon chuck: 20 mm - Reducing sleeve for tool 16 mm - Total tool length: 180 mm - Tool protrusion: max. 135 mm 1x ER16 collet with 10 mm - Total tool length: max. 70 mm - Tool protrusion: max. 40 mm Sawing/drilling unit, swiveling, for tool changer - For miter cuts and angled drilling - Manually swiveling 0 - 90 degrees - Mounting flange 30 mm with countersunk head screws - Tool diameter 52 mm - Prepared for miter saw: max. 180 mm - Drill chuck with Weldon chuck: D=10 mm - Speed: max. 9000 rpm - Infinitely swiveling via the C-axis -

Condition: used, Year of construction: 2000, - Cutting length: 3300 mm - Saw blade overhang: 125 mm - Main saw: 18 kW - Scoring saw: 2.2 kW Panel dividing saw Manufacturer: Holzma Type: HPL 23/X/33/22/30/L Year of manufacture: 2000 Pgodpszuy A Ssfx Amxjt Technical specifications - Cutting length: 3300 mm - 3 air cushion tables - Lifting table: 3300 x 2200 mm - Saw blade overhang: 125 mm - Main saw: 18 kW - Scoring saw: 2.2 kW - CADMATIC control system - CADMATIC control system Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 5480, EUROMAC XT FLEX 12S 1500/30-2500 CNC punching / nibbling machine. Technical data: - Year of construction: 2022 - Serial number: 5480 - Max. punching force: 30 t Pgjdpfx Amez Aaw Soxot - Working range X axis: 2500 mm - Working range Y axis: 1500 mm - Multitool holders included: XMTE6 and XMTE10 - Chute door for extraction of parts up to 1000x1500 mm, with part detection Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Condition: used, machine/vehicle number: 008121, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: PUR Pgedpfsw Idhtox Amxot Corner Rounding Unit: yes Max Panel Width: 3000 mm Max feed speed: 32 m/min Operating Units Right Side: 10 nr Operating Units Left Side: 10 nr

Condition: good (used), Year of construction: 2014, operating hours: 6,307 h, load capacity: 3,000 kg, lifting height: 5,390 mm, fuel type: electric, mast type: triplex, construction height: 2,500 mm, empty load weight: 5,500 kg, mileage: 6,307 km, TRIPLEX forklift, brand STILL. Year of manufacture: 2014. Capacity: 3,000 kg. Lifting height: 5,390 mm. Equipped with a FREELIFT system. Equipped with SIDE SHIFT and FORK SPREADER. Mast height: 2,500 mm. Only 6,307 hours on the meter. Battery replaced in 2019, equipped with an external charger and automatic filling system. Watch the video on YouTube. Pgedozaawbopfx Amxot

Condition: used, Year of construction: 2012, operating hours: 43,373 h, machine/vehicle number: TP116, Used Cap Applicator – Overview This used cap applicator, manufactured by Tetrapak, is designed for high-speed application of plastic screw caps onto carton packages in industrial packaging and beverage production environments. The Cap 30 Speed model supports efficient cap application at up to 12,000 caps per hour, making it a reliable choice for a second hand or used bottling line where consistent throughput and precise cap placement are critical. It is well suited for integration into modern packaging machinery setups and can operate as part of a larger used bottling line for beverage production. Engineered for accuracy and repeatability, the machine is compatible with Helicap 23 closures, commonly used in carton packaging applications. Its robust construction and proven Tetrapak engineering ensure stable performance for producers seeking to optimize industrial packaging efficiency without compromising quality. With testing available, this unit offers confidence in readiness and operational reliability. Technical Specifications & Performance Data Manufacturer: Tetrapak Model: Cap 30 Speed Alternate reference: Cap30 Speed Year: 2012 Production speed: up to 12,000 caps/hour Cap system: Helicap 23 (plastic screw cap) Cap size: 23mm Container type: Carton packages Advanced Automation & Control Systems The Cap 30 Speed is built for dependable, automated operation within demanding production schedules. Typical features include an intuitive operator interface for quick setup and monitoring, integrated safety logic, and precise actuation for consistent cap positioning. Designed for high uptime, the machine supports streamlined changeovers and consistent application pressure, helping maintain output quality and reduce stoppages across extended shifts in beverage production. Production Line Integration Capabilities This cap applicator integrates efficiently into upstream and downstream equipment within a used bottling line or complete packaging system. It can be configured for inline operation with conveyors and synchronization signals for smooth product flow. The Helicap 23 compatibility supports widely used carton formats, making it a strong fit for industrial packaging lines that require dependable throughputs and minimal bottlenecks. Its footprint and connection points are suitable for common layout configurations, and it can operate as a standalone station or as part of a synchronized multi-machine line. Machine Condition & Maintenance History The applicator is available with the possibility to test the machine, indicating readiness for operation and providing assurance of functional performance. As a second hand solution, it represents a cost-effective option for facilities seeking dependable capping capability with verifiable operation prior to installation. Operational Performance & Versatility At 12,000 caps per hour, the machine delivers consistent performance for high-volume carton capping in beverage production. Helicap 23 compatibility ensures secure, repeatable application of plastic screw caps. Its stable mechanical design and precise application mechanism help maintain package integrity, reduce rejec... Pedpfox H Tc Ejx Amxsgt

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 45 kg, total length: 350 mm, total width: 605 mm, total height: 1,080 mm, input voltage: 230 V, laser power: 20 W, laser wavelength: 1,064 nm, scan area length: 70 mm, scan area width: 70 mm, type of cooling: air, type of input current: AC, laser type: fiber laser, The mobile laser LAS 23 portable is characterized by its compact design. Small, handy and with custom-made attachments that can be individually exchanged in the quick-change system. With its mobile base, it can be moved to the workpieces to be marked. This makes it suitable for small, large and heavy workpieces. Pgsdpfszxcfkox Amxjt With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Made in Germany - Fiber laser 20W (optional: 30 Watt, 50 Watt) - Laser class 1 - CE compliant, according to EU directives - Wavelength 1064nm - Marking field size 70x70mm (optional: larger) - Signal lamp for indication of operating status - marking software EZCAD - Connection 230V - Air cooled - Laptop with Windows operating system - Dimensions: 350 x 605 x 1080mm (LxWxH) - Weight: approx. 40 Kg - weight of portable laser unit 2,8 Kg - Fiber optic cable approx. 2,50 m - Extraction optional

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,064 mm, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, total width: 1,500 mm, total height: 2,050 mm, total length: 900 mm, working range: 600 mm, overall weight: 120 kg, warranty duration: 12 months, height adjustment type: electric, door opening width: 700 mm, door opening height: 400 mm, scan area length: 150 mm, scan area width: 150 mm, table length: 600 mm, table width: 600 mm, space requirement width: 1,550 mm, space requirement height: 2,100 mm, laser wavelength: 1,064 nm, working height: 950 mm, input frequency: 50 Hz, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Pgsdsy T Ixnopfx Amxst The standard equipment includes integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30 Watt, 20 Watt or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - Signal light for displaying operating status - optional: rotary axis (3-jaw chuck) - optional: extraction system (incl. activated carbon filter) - optional: digital height measuring system - optional: autofocus - EZCAD marking software in German / English (other software available on request) - Pilot laser (simple preview, plain text preview) - Focus finder (simple focus adjustment) - max. component height approx. 300mm - Electrically adjustable Z-axis - Integrated PC with Windows operating system - Height-adjustable screen and keyboard support - Frame made of aluminum profile - Air-cooled - Door width approx. 700mm / door height (pass-through): approx. 400mm - 230V connection - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with screen holder approx. 1500 x 800 x 1900mm (LxWxH) - Weight: approx. 120 kg

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 702563, Year of construction: 2007, operating hours: 7,720 h, load capacity: 3,000 kg, lifting height: 6,500 mm, free lift: 2,280 mm, fuel type: gas, mast type: triplex, fork length: 1,190 mm, TECHNICAL DETAILS Lifting capacity: 3,000 kg Lifting height: 6,500 mm Free lift: 2,280 mm Mast height: 3,100 mm Fork length: 1,190 mm Minimum fork width: 250 mm Maximum fork width: 1,100 mm MACHINE DETAILS Mast type: Triplex Fuel type: LPG Engine manufacturer: Nissan Number of wheels: 4 Dimensions (L x W x H): 2,830 x 1,240 x 3,110 mm Transport packages: 1 piece Pgedpozxckasfx Amxet Operating hours: 7,720 h EQUIPMENT Side shift Work lights Partial cab Documentation CE marking

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 120 kg, laser power: 30 W, laser wavelength: 1,064 nm, scan area length: 150 mm, scan area width: 150 mm, type of cooling: air, type of input current: AC, laser type: fiber laser, The universal LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser, you can mark almost all materials such as steel, hard metal, aluminium and plastics. Depending on requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be created with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers once they have been set. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer it to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. The LAS 28 XLe laser model can optionally be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Other options, such as lateral cantilevers for marking long parts, movable Z-axis, drawer systems, etc., can also be implemented. Programmable, software-controlled axes (X-, Y-, Z-axis) and database connection are also possible. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: autofocus system - system for automatically determining the focus distance - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V Pjdpfowkpvvox Amxegt - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 120 Kg

Condition: used, maximum load weight: 36,540 kg, overall weight: 48,500 kg, axle configuration: 3 axles, first registration: 06/2020, next inspection (TÜV): 09/2028, Year of construction: 2020, Equipment: ABS, Langendorf SATÜ 30-10.0 M Low-Loader | 3 Axles | Wheel Recesses | 36,540 kg Payload Available immediately at our location in Kaufungen. For more information, please contact: * Luis Lucena Pgsdpsy A Uxaofx Amxjt * Viktoria Sologubova German Langendorf SATÜ 30-10.0 M Low-Loader | 3 Axles | Wheel Recesses | 36,540 kg Payload For sale is a used Langendorf SATÜ 30-10.0 M low-loader from 2020. The semi-trailer features wheel recesses, remote control and three axles, two of which are steered and one is liftable. With a 10,000 mm long loading platform and a technical payload of 36,540 kg, the low-loader is ideally suited for the transport of construction machinery, wheel loaders, excavators and other heavy equipment. Technical data: * Manufacturer/Model: Langendorf SATÜ 30-10.0 M * Vehicle type: Low-loader * First registration: 06/2020 * Year of manufacture: 2020 * Axles: 3 * Two steered axles * One lift axle * Overall length: 13,900 mm * Loading platform length: 10,000 mm * Technically permissible gross weight: 48,500 kg * Tare weight: 11,960 kg * Payload: 36,540 kg * Wheel recesses * Remote control * MOT: New * Vehicle number: G400133 * Condition: Used * German vehicle Inspection is possible by prior appointment. Further information, photos and videos are available upon request. Errors, changes and prior sale reserved. Financing example: * Internal number: G400133 * Purchase price: €54,900.00 * Down payment: 10% * Term: 60 * Monthly rate: €849.02 * Residual value: €10,380.00 If you are interested in this offer or would like to customize it to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors and omissions excepted. We will gladly accept your used vehicle in part exchange. Financing is possible directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.