Used Rebar Bending Machine for sale (66,030)

Condition: used, Year of construction: 1999, tube diameter 12-54 mm (Kupfer / Edels. mm serial number EBD mode of operation Schneiden/ Entgraden / Re speed Rollen 450 U/min m/min Ndsdpfx Agjumyhljreb

Condition: ready for operation (used), Year of construction: 2017, Performance range: 20mm-60mm, max. bending angle: 180°+10°, max. bending radius: 150mm, effective length: 3048mm, bending height: 1050mm, max. section modulus: 12.1cm³, bending tolerance: +/-0.1°, operating pressure: 200bar, connected load: 4kW, machine dimensions X/Y/Z: approx. 2000mm/900mm/1200mm, weight: approx. 500kg. Documentation available. On-site inspection is possible. Nsdpfx Agjwg E Dhorjdb

Condition: good (used), Here are the official specifications of your *BPR CP30* – 30mm spindle: It is a small but very versatile machine. Capabilities for mild steel: *Manufacturer's data for BPR / Eagle CP30:* - *Flat bar to flat bar:* 80 x 15 mm max - *Flat bar on edge:* 50 x 10 mm (to be verified, but standard on CP30) - *Round tube:* 60.3 mm x 2 mm (2-3/8" x .062") - *Square tube:* 38 mm x 3 mm (1-1/2" x .120") Ndjdpfjzwg Rzjx Agrob - *Round solid bar:* 30 mm max - *Square solid bar:* 30 mm also - *Gas pipe / Pipe:* 1"1/2 Sch 40, i.e. 48.3 mm - *U-channel:* 50 x 25 x 5 mm - *Angle iron:* 40 x 40 x 5 mm (external) / 35 x 35 x 5 mm (internal) d019775a *Technical specifications:* - Spindle diameter: 30 mm - 2 drive rollers (the lower 2) - Bending speed: 8.5 m/min - US speed: 12 feet/min - Weight: 210-247 kg depending on version (yours is 187 kg on the plate = older, lighter version) d019 In short, it is perfect for standard locksmithing/metalworking.

Condition: used, functionality: fully functional, Year of construction: 2016, Combined profile and tube bending machine Manufacturer: Italy For round tubes up to 48 mm Ndsdjy Ryfnjpfx Agreb 1st station for ring bending for large radii 2nd station for tube bending up to max. 180 degrees Electrically driven Motor: 1.1 kW, 400 V, 50 Hz, 3-phase With digital display With foot pedal With tooling for 42.4 mm tube, radius approx. 150 mm Weight approx. 350 kg

Condition: new, Year of construction: 2025, – Capacity 36 mm – Automatic and manual mode – 3 programmable bending movements – Foot pedal operation – Hardened bending tools – Emergency stop Nedpfxoydhl Ie Agrsdb – Documentation – 400V

Condition: good (used), Year of construction: 1981, Press brake, bending machine, swing bending machine, die bending machine -Swivel bending machine: with opening upper jaw for completely closed bent sheet metal profiles -Manufacturer: LOTZE Type HZ 2500/3 -Drive: mechanical, cam control semi-automatic / bending angle preselection Ndsdpfx Ajz Ay Ikogrob -Max. working width: 2500 mm -Max. sheet thickness: 3 mm -Max. intermediate dimension: 470 mm -Connected load: 6 kW Accessories: incl. bending tools/stops, see photos -Dimensions: 4150/1110/H1970 mm -Weight: 5040 kg

Condition: good (used), Year of construction: 1993, machine/vehicle number: 93212004, Offer 26084 Technical Data: - Maximum working width: 2040 mm - Maximum material thickness at 40 kg/mm² tensile strength: 4 mm - Bend angle adjustment: electronically pre-selectable, 0 - 135° - Automatic sequence control for a complete work cycle - Maximum upper beam opening/clamping stroke: 350 mm - Height adjustment: - Bending beam: 100 mm - Lower beam: 100 mm - Upper beam drive: 400 V / 4 kW - Bending beam drive: 400 V / 4 kW - Bending beam adjustment - Back gauge adjustable via handwheel - Electric foot switch Ndsdpfsy Em Dgjx Agrob - Space requirement with back gauge: approx. W 3200 x H 1650 x D 2100 mm - Weight approx.: 4500 kg

Condition: good (used), You are bidding on: a branded folding machine from a very reputable and well-known manufacturer - Schechtl Device features: Schechtl KSV folding machine – reinforced model Rail bends cleanly Angle display Bending length just over 2m Sheet thickness 1.5 mm – suitable for aluminum, zinc, etc., more than 2 mm possible Standard rail - radius for aluminum, zinc is also available as an option Round rolls as shown in the picture Optional: depth stop 500, additional rails Schechtl guillotine shear Useful length 2m Sheet thickness 1.5mm – more for aluminum Depth stop 500 mm Extendable sheet support Optional: additional accessories and tools available, such as bead forming device, tube bars and holders, tools, etc. Matching manual guillotine shear also available, please request a price for the set if interested, I will then configure it for you. Important! Optionally, you can find and purchase many machines and machine accessories, such as various rails, depth stops – everything related to sheet metal and steel processing like folding machines, guillotine shears, drilling machines, round bending machines, slitting and profiling machines, accessories (beading device, round rolls for gutter production, back gauge, etc.), as well as other hand tools and spare parts from many top manufacturers, all in the shop. I am always available for questions. You will receive an invoice with VAT shown separately. Free loading possible – weight approx. 950 kg and approx. 1000 kg Inspection and testing are possible and welcome by telephone appointment. Payment in cash on collection. Take advantage of our experience and expertise, we are happy to advise you. Collection by the buyer (or by a forwarding agent commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97261 Güntersleben Item number: Folding machine KSV / Guillotine shear MT Nedey Rtb Aepfx Agredb

Condition: like new (used), functionality: fully functional, Year of construction: 2026, operating hours: 8 h, machine/vehicle number: BD38NCCOMP, bending angle (max.): 190 °, overall weight: 900 kg, total length: 3,100 mm, total width: 950 mm, total height: 1,500 mm, power: 6 kW (8.16 HP), input voltage: 220 V, type of input current: AC, warranty duration: 12 months, Semi-Automatic Single-Head Hydraulic Pipe Bending Machine BD50NC2A Machine Model: BD38NCCOMP Machine Applications  Transportation Sector For locomotives, automobiles, and bicycles: exhaust manifolds, brake lines, fuel supply conduits, steering mechanisms, air - conditioning ducting systems, seating assemblies, balancing components, bumper structures, window frame assemblies, handlebar components, and frame structures.  Furniture Industry Nedpfx Agjya An Nsrodb Indoor and outdoor seating and table sets, office furniture including desks and chairs, shelving units, bed frames and associated furniture pieces.  Leisure and Recreation Industry Fitness apparatus, infant strollers, utility carts, and amusement ride installations.  HVAC (Heating, Ventilation, and Air - Conditioning) and Appliance Industry Water heating units, electric heating appliances, gas - fired cooktops, refrigeration units, and air - conditioning equipment.  Heavy Industrial Sphere Piping networks for boilers, heat exchanger, power generation plants, chemical processing facilities, diesel engine manufacturing, and shipbuilding operations.  Diverse Other Industries Household consumer goods, rehabilitation - oriented medical devices, sanitary fixtures, the decoration and interior design sector, the construction industry, agricultural machinery and equipment, and the aviation manufacturing and maintenance industry. Specification The largest applicable carbon steel pipe (bending radius ≥ 2d) Φ38×2.0mm (thickness Max. 2.0) The largest applicable stainless steel pipe (bending radius ≥ 2d) Φ38×1.5mm (thickness Max. 1.5) Maximum core length (*) 850mm Critical Parts and Functional Components Maximum bending radius (*) 320mm Maximum bend angle 190° The number of bends that can be set for each pipe fitting (*) 25 bends The number of pipe fitting files can be set 280 sets (extensible) Working speed bending speed Max.90°/s Machine tool bending angle ±0.1°

Condition: excellent (used), functionality: fully functional, Year of construction: 1989, pipe diameter (max.): 42 mm, pipe length (max.): 3,000 mm, bending radius (max.): 180 mm, wall thickness: 3 mm, Pipe bending machine with electric control, 4-fold bending angle pre-selection and digital display  Hydraulic bending drive operated by hand lever valve Hydraulic bending drive, operated by hand lever valve Follower-type pressure die (sliding guide) Hydraulic mandrel retraction Pipe circular saw with coolant lubrication and automatic feed 6 mandrels up to 24 mm included x 3000 mm Pipe deburring unit for internal and external deburring Hydraulic power unit as basic seating for attaching a cutting ring assembly or flaring device  Machine mobile and flexible to use Max. tube Ø: 42mm Min. tube Ø: 6mm Max. Wall thickness: 3mm Max. Bending radius:5mm Min. bending radius:180mm Max. bending length:3000mm Deburring attachment:Yes Sawing attachment: Yes Flair attachment: Yes Length: 3500mm Ndjdpfjuccw Hex Agrsb Width: 1000mm Height: 1200mm Weight: 1000kg

Condition: like new (used), Year of construction: 2022, Semi-automatic tube bending machine for tubes up to 30 mm with extended bending clearance, especially for meander bending Standard equipment: • Operation via Siemens Touch Panel KTP 600 • Function keys and plain text display for operator guidance • Program memory internally for 100 programs with 20 data sets each • Bending axis electronically controlled • Automatic bending angle adjustment • Target/actual value display for bending angle • Control panel swiveling • Bending head freestanding • Tube clamping hydraulically, clamping pressure adjustable • Guide block adjustment hydraulically • Bending mandrel extension hydraulically • Machine can be used in a mobile manner Nodezichajpfx Agrodb • Extended bending clearance for bending radii up to R max = 200 mm 1 TUBOBEND 30 with tube feed length 1,500 mm Technical data: Tube range up to: 30.0 x 3.0 mm (E 235 with Rm = 2xD) Bending radius up to: 200 mm Control: electronic Effective bending angle (max.): 180° (+10° overbending) Switch-off accuracy: ± 0.1° Bending speed (max.): 45°/s Dimensions L/W/H: 2200 / 600 / 1100 mm Weight: approx. 500 kg Power: 1.5 kW Connection data: 400 V / 50 Hz / 3 phases Mains fuse: CEE 16 A Color: RAL 5015 blue Optional equipment 1 piece. Length stop device, length 1500 mm 1 piece. Early mandrel retraction to optimize arc quality • For use with ball mandrels • Mandrel is automatically retracted during the bending process • Adjustment up to 10° continuously programmable 1 piece. Automatic mandrel lubrication as a minimum quantity lubrication system Pneumatic dosing device HP-Microspray (compressed air connection required) 1 piece. Safety foot switch for clamping and bending function 1 piece. Adjustable bending speed Note/Remark: The tube is approximately 500 mm round at the beginning and end of the bend (tube and tool = Ø 33.7 mm). The tube is only flattened into a flat oval tube in the spiral. The spiral only has one bend at each end. Bending of return bends is not possible. Since the tube is round, a pre-rotation can be performed to compensate for the slope. The position of the bend or the spiral must be determined using an external device.

Condition: like new (used), Year of construction: 2001, Technical data: Working width: 2050 mm Max. bending capacity for normal steel St40: 4.0 mm Max. edge bending for normal steel St40: 2.0 mm CNC control: MG Diameter of top roller: 140 mm Diameter of side bottom rollers: 105 mm Diameter of central bottom roller: 130 mm Conical bending device Working height: 800 mm Mobile control panel Hydraulic folding bearings CE marking Motor power: 3 kW Nsdsza D U Dopfx Agrjdb Dimensions (length x width x height): approx. 3400 x 1200 x 1200 mm Weight: approx. 2.5 tons Condition: Very good condition, very little use The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: as good as new (ex-display), Year of construction: 2025, sheet width 1050 mm plate thickness 2.0 mm roll length 1070 mm roll diam. toproll 75.0 mm engine output 1.5 kW weight 325 kg range L-W-H 1530 x 700 x 1160 mm Exhibition machine - like NEW not yet in use (!!) Special price on request Ndjdpfxjxacbus Agrsb Equipment: - electro-motor-driven 3-roller round bending machine - asymmetrical roller arrangement - 2x driven rollers using a brake motor - manual folding bearing for quick removal of the workpiece - wire insertion grooves on the bottom and rear rollers - double foot switch for R/L running including emergency stop button - rear roller feed with ratchet lever - electrical safety device

Condition: as good as new (ex-display), Year of construction: 2025, sheet width 1250 mm plate thickness 1.5 mm roll length 1270 mm roll diam. toproll 75.0 mm engine output 1.5 kW weight 400 kg range L-W-H 1730 x 700 x 1160 mm Exhibition machine - like NEW not yet in use (!!) Special price on request Equipment: - electro-motor-driven 3-roller round bending machine - asymmetrical roller arrangement - 2x driven rollers using a brake motor - manual folding bearing for quick removal of the workpiece - wire insertion grooves on the bottom and rear rollers - double foot switch for R/L running including emergency stop button Nedpfoxaafdox Agredb - rear roller feed with ratchet lever - electrical safety device

Condition: new, Rollmak 3-roll round bending machine SM 90-10/3.3 Technical specifications: Sheet width 1050 mm Sheet thickness 3.3 mm max. sheet thickness 3.0 mm Roll length 1050 mm Ndsdpstzll Eefx Agrjb roller diameter 90 mm smallest bending diameter 130 mm Weight 440 kg Dimension L-W-H 1650 x 700 x 1160 mm Motor:1,1 KW Equipment: Top and bottom roller electrically driven Swing-out top roller Rear roller infeed with handwheel Conical bending device Asymmetrical roller arrangement Self-braking main motor Separate control panel safety line Values apply to St-37 / 240 N/mm² CE mark

Condition: as good as new (ex-display), Year of construction: 2022, sheet width 1070 mm plate thickness 4.0 mm pre-bending 3.0 mm roll length 1070 mm roll diam. toproll 110 mm bending speed 3.0 m/min engine output 2.2 kW weight 848 kg range L-W-H 2250 x 1000 x 1800 mm Nsdpoxacdpsfx Agrjdb New price ~ 10.000 euros Exhibition machine - like NEW (!!) Equipment: - robust electro-mechanical round bending machine - 2x central rollers driven by electric motor (top & bottom roller) - right/left running of the rollers - top roller can be manually swiveled out, with folding bearing - manual delivery of the side roller - including conical bending device - asymmetrical roller arrangement - rollers with profile inlets - safety device (safety line with switch unit) - 1x freely movable control panel - operating instructions (ENG)

Condition: good (used), functionality: fully functional, BEYELER HYDRAULIC BENDING MACHINE 3000X100 TON. MOTORIZED REGISTER, 3 AXES. RECESS 250. DIMENSIONS: 350X160X245 cm (H), WEIGHT 6,500 KG (65 QL.) Nedpfx Ajvxif Iogrjdb

Condition: ready for operation (used), Year of construction: 1992, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 205 mm side roll diameter ~ 195 mm Control konv. oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 3200 kg range L-W-H 4500 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll bending machine - 3-roll concept offers a wide range of bending and rounding options - Pivoting control unit at the front * Operation - Control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Sturdy welded steel construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge / pressure indicator for the rolls - Safety device (safety lanyard with switch unit) - Operating instructions (PDF) Ndsdjxacdvspfx Agreb

Condition: excellent (used), For sale, we offer a Hauxia bending machine. This is a demonstration machine that was used for prototypes in our production hall. Therefore, it has very few operating hours. The bending machine is sold with tools. See photos. Technical data: Bending force: 40T Bending length: 1600mm Nedpfxsixl Tgj Agrjdb Distance between columns: 1200mm Stroke (Y-axis): 150mm Open height: 390mm Table width: 120mm Working speed: 15mm/s Rapid traverse speed: 150mm/s Return speed (upward): 100mm/s Control axis (8 + 1 axis): Z1, Z2, Z1, Z2, R1, R2+V Power: 5.5 kW Control system: Delem-DA-66T (multilingual) Operating manual: English Special net price: €19,000 Inspection possible by prior arrangement. Location: 89-600 Chojnice If interested, please contact us.

Condition: like new (used), functionality: fully functional, Year of construction: 2026, operating hours: 8 h, machine/vehicle number: 2026BD25, bending angle (max.): 190 °, overall weight: 1,000 kg, total length: 1,800 mm, total width: 850 mm, total height: 1,230 mm, power: 8 kW (10.88 HP), input voltage: 380 V, type of input current: AC, warranty duration: 12 months, control cabinet height: 1,200 mm, Single - Head Servo CNC Pipe Bending Machine BD25CNC3A1S Machine Model: BD25CNC3A1S Machine Applications  Transportation Sector For locomotives, automobiles, and bicycles: exhaust manifolds, brake lines, fuel supply conduits, steering mechanisms, air - conditioning ducting systems, seating assemblies, balancing components, bumper structures, window frame assemblies, handlebar components, and frame structures.  Furniture Industry Indoor and outdoor seating and table sets, office furniture including desks and chairs, shelving units, bed frames and associated furniture pieces.  Leisure and Recreation Industry Fitness apparatus, infant strollers, utility carts, and amusement ride installations.  HVAC (Heating, Ventilation, and Air - Conditioning) and Appliance Industry Water heating units, electric heating appliances, gas - fired cooktops, refrigeration units, and air - conditioning equipment.  Heavy Industrial Sphere Piping networks for boilers, heat exchanger, power generation plants, chemical processing facilities, diesel engine manufacturing, and shipbuilding operations.  Diverse Other Industries Household consumer goods, rehabilitation - oriented medical devices, sanitary fixtures, the decoration and interior design sector, the construction industry, agricultural machinery and equipment, and the aviation manufacturing and maintenance industry. Maximum Bending Pipe Diameter × Wall Thickness (Normal Steel, Aluminum, Copper etc.) Φ25mm×1.2mm Maximum Bending Radius R150mm Maximum Bending Angle 190° Maximum Feeding Length 1200mm Working Speed: Bending Speed Max. 150°/s Working Speed: Pipe Rotating Speed Max. 200°/s Working Speed: Feeding Speed Max. 1000mm/s Working Precision: Bending Precision ±0.1° Working Precision: Pipe Rotating Precision ±0.1° Ndedpfx Ageyak E Njrjb Working Precision: Feeding Precision ±0.1mm Data Transmission Mode 1. Coordinates (X.Y.Z) 2. Working Values (Y.B.C) Bending Mode Servo Bending

Condition: used, 12-piece die block for GEWA press brake Bending tool for press brake, lower tool Type: 0255/14 V-block size: 16 mm for 90° Ndsdpfx Agjwbvmijrob V-block angle: 88° Die depth: approx. 8 mm Height: 120 mm Max. pressure per meter: 100 t/m Die base width: 60 mm Total length: 4175 mm Segment lengths: 4 x 835 mm, 1 x 400 mm, 1 x 200 mm, 1 x 100 mm, 1 x 50 mm, 1 x 40 mm, 1 x 20 mm, 1 x 15 mm, 1 x 10 mm Weight: 110 kg Very good condition

Condition: new, number of rollers: 3, shaft diameter: 50 mm, – Shaft diameter: 50 mm Nsdpfx Agez Dquujrsdb – Digital display – Forward and reverse operation – Can be used horizontally and vertically – Foot pedal control – Emergency stop – Documentation – 400V

Condition: new, Year of construction: 2009, 30 mm 30 mm L-beam 20 x 20 x 4 mm flat steel 25 x 6 mm Axis diameter 20 mm work speed 11 U/min total power requirement 0,2 kW weight of the machine ca. 80 Kg dimensions of the machine ca. 0,6 x 0,6 x 1,5 m Profile bending machine with: - Foot pedal for right/left rotation - Digital display - 1 set of standard rollers - 3 rollers are driven Nedev Skzdopfx Agredb - Horizontal or vertical operation

Condition: ready for operation (used), A CNC flat wire vertical wire bending machine V&C GmbH is available. Wire thickness range: 0.8mm-10mm, max. wire width: 30mm, min. winding inner diameter: 20mm, max. winding outer diameter: 250mm, max. winding height: 160mm, max. winding height with holding rod: 500mm, max. winding length: 250mm, min. bending radius: R6°, max. number of edges: 12/revolution. Machine dimensions X/Y/Z: approx. 2650mm/1000mm/1800mm, weight: approx. 800kg. Documentation available. On-site inspection is possible. Ndedeycwtfepfx Agrob

Condition: new, 3-Roll Round Bending Machine ORM 2070 x 140 Technical Specifications: Special equipment included in the price: motorized adjustment of the bottom rollers hardened rollers motorized adjustment of the rear rollers digital display Sheet metal width 2070 mm Njdpfjfig Apex Agrsdb Sheet metal thickness 5.0 mm max. Sheet metal thickness 4.0 mm for pre-bending Roller length 2070 mm Roller diameter 140 mm Weight 1730 kg Dimensions L-W-H 3230 x 880 x 1100 mm Motor: 2.2 KW Equipment: Top and bottom rollers, electrically driven Top roller can be swiveled out Taper bending device asymmetrical roller arrangement self-braking main motor separate control and operating panel safety cable CE marking