Used Rohmaterial Special Machine for sale (79,160)

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, table length: 2,000 mm, table width: 1,200 mm, pressing force: 200 t, stroke length: 100 mm, Raster punching machine, RST series, with Desch compact drive. 3-part drawbar, cast iron construction. Column guidance with pre-tensioned roller cages for maximum precision. Nwsdpfx Asxcbcvoi Tsn Fixed stroke 100 mm, conversion to a smaller stroke would be possible. Hydraulic overload system and electronic press force monitoring. Mechanically overhauled in 2021. Control system: Siemens S7.

Condition: used, functionality: fully functional, Year of construction: 1998, operating hours: 1,000 h, machine/vehicle number: 8044, overall weight: 2,070 kg, Equipment: CE marking, documentation/manual, Shearing machine Shearing capacity for flat steel: 450x15 mm; 300x20 mm Shearing capacity for angle iron: 130x130x13 mm (90 degrees); 70x70x7 mm (45 degrees) Shearing capacity for round and square bar: 45 mm Punching machine: 800 kN Maximum capacity: ø40x14 mm Nwodpfj Afnqpex Ai Tsn Power: 9 kW

Condition: used, Offered is a radial drilling machine. Equipped with a height-adjustable radial arm, horizontally movable drill head, clamping table with T-slots and base plate with clamping slots. Inspection possible by arrangement. Nwjdpfx Aie Afpkke Tsn

Condition: used, Offered is a horizontal boring machine. Equipped with a rotary clamping table with T-slots, horizontal boring and milling spindle head, large vertical faceplate with clamping slots, mechanical control levers and handwheels, as well as an additional clamping surface with T-slots. Inspection possible by arrangement. Nodpfe Afpk Dox Ai Tjwn

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand “Ricoh Pro C7200x” colour production system Item for sale: 1 x Ricoh Pro C7200x with the following specifications: incl. LCIT RT5120 vacuum feed paper deck incl. SR5050 finisher incl. Fiery Controller E-45A Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 2,610,794 pages Colour: Approx. 1,952,555 pages Black: Approx. 65,823 pages Condition: Nedpfx Aio Afukvs Tjwn This is a second-hand machine, which may show signs of wear (minor scratches or discolouration). The machine has been tested for functionality A test print can be seen in the photo Packaging and dispatch: You are welcome to view the machine during our opening hours. Please arrange an appointment! Sturdy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you before dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, Year of construction: 2008, - R530 round stack feeder - Navigator control system - VARIO-Control - 6 parallel folding stations with automatic folding pocket adjustment - OCV LAN Smart Camera for text/barcode recognition Nsdpfx Aie Afumqs Tswn - Folding rollers made of soft PU

Condition: used, - R800 round stack feeder - Navigator control system - 6 parallel folding pockets Nedpfxe Afum Dj Ai Tjwn - 2 folding knives in the cross folding station - 1 additional folding pocket after the 1st transverse fold - Folding rollers made of soft PU

Condition: used, functionality: fully functional, In this listing, you are purchasing a ‘Keyence XM-1200’ coordinate measuring machine Item for sale: 1x Keyence XM-1200 with the following accessories including the accessories shown in the photos Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or discolouration). Packaging and dispatch: Njdpfeyrcx Sex Ai Town You are welcome to view the device during our business hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: reconditioned (used), Year of construction: 2016, functionality: fully functional, WEINIG Rondamat 1000 CNC – High-precision knife grinding machine For sale is a used WEINIG Rondamat 1000 CNC, manufactured in 2016. The Rondamat 1000 CNC is a high-precision CNC knife grinding machine for fully automatic sharpening and manufacturing of profile knives, as well as for re-sharpening of straight planer knives and profile knives in the knife head. Technical data and equipment: * Manufacturer: WEINIG * Model: Rondamat 1000 CNC * Year of manufacture: 2016 * High-precision knife grinding machine * Automatic import of CNC programs from Moulder Master * Fully automatic sharpening and manufacturing of profile knives from a blank * Fully automatic re-sharpening of straight planer knives and profile knives in the knife head * Grinding of planer knives in the planer head with standard knife overhang possible Grinding unit: * Solid spindle carrier with precise guides * Roundness accuracy less than 0.005 mm * Motorized radial adjustment for different grinding wheel diameters * Back clearance angle fully automatically adjustable * Lateral clearance angle fully automatically adjustable * Grinding spindle with HSK mounting * HSK 50F * Grinding wheel diameter: 150–200 mm * Grinding wheel width (Borazon/Diamond): 2 / 3 / 4 / 10 mm * Grinding wheel bore: 60 mm Nsdpsz Eypdjfx Ai Tswn * Grinding spindle drive: 1.5 kW (2 HP) * Grinding spindle speed: 1,500–3,000 rpm, frequency-controlled * Radial clearance angle grinding: 10–30° * Lateral clearance angle: 0–20° Automatic equipment: * Automatic grinding wheel measurement using a mechanical measuring process * Automatic compensation for grinding wheel wear * Automatic tool changer * Grinding wheel magazine with 3 magazine slots * Coolant system * Automatic coolant cleaning via a transport filter system * Coolant tank approx. 70 liters * Coolant additive: 5 liters * Coolant pump: 210 W * LED light for the machine interior Tool holder: * System "PowerLock 360" * Suitable for grinding PowerLock tools and large-sized boring tools * Max. tool weight: 80 kg * Tool holder with manual HSK quick-change system * Interchangeable receiving spindle for right and left tools * Max. tool width: 360 mm * Max. tool circle diameter: 300 mm * Min. tool circle diameter: 90 mm * PowerLock adapter for conventional tools, shank diameter 50 mm * Additional dividing head * Additional PowerLock adapter for conventional tools 40 mm or 50 mm Electrical data: * Operating voltage: 400 V * Voltage range: 380–420 V * Frequency: 50 Hz * Total connected power: approx. 3 kW (4 HP) Operation and control: * Operation from the front * Graphical user interface * Connection to WEINIG Moulder Master * Management of grinding wheels * Management of CNC programs * Setting of machining parameters such as feed speed, depth of cut, and feed cycles * Setting of tool parameters such as number of cutting edges, tool diameter, and blank material * Display of the current machining progress * CNC program generation in conjunction with Moulder Master

Condition: used, Year of construction: 2004, Technical details: x-travel: 560 mm y-travel: 560 mm z-travel: 600 mm control: Fanuc 16 iMA rapid travel x/y/z: 84 / 84 / 94 m/min feeds x/y/z -stepless: 50000 mm/min spindle drive: 22 kW spindle speed:: 50 - 14000 1/min max. torque on the spindle: 156 Nm size of pallet: 400x400 mm numbers of pallets: 2 table load: 500 kg working diameter: 630 mm workpiece - installed height: 1000 mm change time of pallets: 10 sec distance spindle center to table: 80 -640 mm Distance spindle nose - pallet centre: 70-670 mm tool magazin:: 60 x HSK-A 63 tool changing time: 1 (4) sec max. tool weight: 8 kg max. tool diameter: 70 / 170 mm tool length - max.: 360 mm total power requirement: 64 kVA weight of the machine ca.: 9 t dimensions of the machine ca.: 15 m² Accerories Tool life management Macro B 600 Variables Chip conveyor scraper type Coolant through Spindle 50 bar Knoll VRF unit This well maintained horizontal machining center has a full 4th axis, twin pallet changer, 60 tools magazine for HSK-A 63 toolholders and coolant through spindle 50 bar. An external hydraulic pressure control system for fixtures is provided. A Video of the machine you can see on youtube Nedpj Afyu Tofx Ai Tjwn *

Condition: used, functionality: fully functional, Year of construction: 2003, operating hours: 93,782 h, laser type: CO₂ laser, laser hours: 8,500 h, laser power: 2,700 W, Equipment: CE marking, cooling unit, dust extraction, fume extraction, safety light barrier, TruMatic 6000 K01 (1600) Large-format, 2700 Watt NC: 94,000 hours Laser on: 37,300 hours Beam on: 8,300 hours Sheetmaster Nwodpfx Aij Afxugs Ton Gripmaster+ shear Loading and unloading trolley Fire extinguishing system Parts conveyor Options: Multishear Thread forming Marking/Signing

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, total length: 14,000 mm, total width: 4,500 mm, total height: 2,900 mm, overall weight: 12,000 kg, input voltage: 415 V, track width: 80 mm, input current: 70 A, input frequency: 50 Hz, Complete 2010 Rademaker Pie Line, capable of producing up to 5,280 filled savoury pies (with lids) per hour. Manufacturer - Rademaker B.V. Model - PIE LINE. Maximum mechanical speed – up to 22 strokes / minute. Output capacity – up to 5,280 pies / hour. Working width – 800mm wide. Electrical requirements – 415 V / 50 hz / 3 phase. Power – 70 Amps (approx.). Weight of complete line – 12,000 kg. Overall footprint – 14m long x 4.5m wide (including return conveyor) x 2.9m high. Line maximum width – 2.2m at widest point. This production line comprises of the following equipment/machinery: 1. 2 X sets of tooling complete with trollies – 1 X set for 4-across pies with casing diameter of 110mm and 1 X set for 3-across ‘family-style’ pies with casing diameter of 180mm. 2. Electrical control panel (with data plate ‘PIE LINE’ on). 3. Inclined flighted conveyor for loading of pastry sheets. 4. Overhead transfer conveyor (used to feed 'STRIPFEEDER') operating at 2.4m high along the length of the line. 5. Rademaker ‘STRIPFEEDER’ with denester for dropping pie cases. 5a. Rademaker Flour Sifter. 6. Rademaker Tamping unit (used to press / tamp the dough round into the pie casing). 7. Rademaker ‘DEPOSITOR’ 6-lane depositing system with hopper and pump. 8. Rademaker ‘SPRAYING DEVICE’. 9. Rademaker ‘LID DOUGH CONVEYOR’ for dropping lids onto filled pies. 10. Dutch Thermal Engineering b.v. (DTE) V-009.0 thermostat for regulating temperature of water bath sat under main conveyor holding pie casings. Nwjdpfx Aijzvmy Hs Tjn 11. Rademaker Press / Crimping unit / Marking unit for putting pattern into casing lid and ensuring it is secured onto pie. 12. Rademaker Pie Exit/Discharge conveyor. 13. Rademaker ‘DOUGH RETURN SYSTEM’ for excess pastry. 14. Rademaker ‘SPOT DEPOSITOR’ for 5-across over line depositing. 15. Unnamed egg-glaze mixing vessel and pump, mounted on mobile frame. CONDITION - Requires some reconditioning before entering production. NOTES – BUYER TO REMOVE FROM SITE.

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP3 from a vocational school!! Technical specifications: >> Machine no. 1212 >> Swivel and tilting table >> Speed: 40 - 2000 rpm >> Feed rate and rapid traverse in 3 axes >> Drive power: 3 kW >> Travel distances X/Y/Z: 500/300/400 mm >> Equipment: Vertical & horizontal spindle >> Extendable vertical quill and horizontal quill - SK-40 >> Collet system S20x2 >> Weight approx. 1300 kg Njdpe Afyy Hjfx Ai Town Accessories and equipment: >> Coolant system >> Central lubrication About the machine: For sale is a Deckel FP3 universal milling machine in good condition. All spindles can be moved easily. Most of the bellows are new. An oil change has been performed. Mechanically and electrically inspected. Take advantage of the opportunity to inspect and test the Deckel on-site while it is powered. For an additional charge, the machine can be equipped with a new K&C digital display.

Condition: used, total height: 3,200 mm, total width: 3,250 mm, total length: 4,500 mm, Colour: Green Nwodj Afww Sopfx Ai Tjn Empty weight: 6.000 kg Price: On request - Drive system: Conventional - Model portal milling machine: Movable table - Number of axes [pcs]: 3 - X-axis travel [mm]: 2500 - Y-axis travel [mm]: 1400 - Z-axis travel [mm]: 1000 - Table length [mm]: 2200 - Table width [mm]: 1500 - Tool holder: SK40 - Options: Digital readout - Transport dimensions: 4500mm x 3250mm x 3200mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 703 mm, travel distance Y-axis: 603 mm, travel distance Z-axis: 503 mm, controller manufacturer: Fanuc, controller model: 0i-MD, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 40, Equipment: chip conveyor, Table swivels +31.1° / -121.7° Table rotates 360° Prepared for 3D probe Nwodpfxj Afw A Uj Ai Tsn

Condition: used, Saw sleeve with hydraulic clamping for sawing timber in an automatic planing and rebating machine. Technical data: Nedpfx Ae Afxkaji Tewn - Bore: 50 mm - Length: 170 mm - Clamping length: 120 mm - Saw blade bore: 100 mm - Material: Steel

Condition: used, Year of construction: 2014, Machine design: Throughfeed/Return feed Working area in X-direction: 1000 mm Working area in Y-direction: unlimited Working thickness (Z-dimension): 60 mm Number of main spindles: 1 Main spindle power: 3.3 kW Clamping system: HSK-63 F Tool changer: Pick-up changer Tool change positions: 3 Back wall milling units: fixed in the Y-direction Vertical drilling spindles - in X-direction: 5 Vertical drilling spindles - in Y-direction: 5 Spindle speed vertical drilling spindle: 4000 rpm Horizontal double drilling spindle in X-direction: 2 Horizontal double drilling spindle in Y-direction: 1 Spindle speed horizontal drilling spindle: 4000 rpm Monitor size: 17" Control type: PC control Operating system: Windows XP Typewriter keyboard: Yes Mouse: Yes Programming system: Masterwork DXF interface: Yes Nedpfozndmhjx Ai Town Online connection possible: Yes CD-ROM drive: Yes Table design: Fixed table with rollers Weight approx.: 1300 kg Dimensions: 2200x2470x1590 mm Storage location: Customer

Condition: excellent (used), functionality: fully functional, VOLLMER CANA E circular blade sharpener, steel Nwsdpfx Aie Af Af Ie Ten In very good working condition.

Condition: used, Year of construction: 2013, functionality: fully functional, POSmill H800U – 5-Axis CNC Machining Center Year of manufacture: 2013 Manufacturer: POSmill Model: H800U Machine number: 20130408 Control system: Heidenhain iTNC 530 Technical data - Travel range X-axis: 700 mm - Travel range Y-axis: 820 mm - Travel range Z-axis: 600 mm - Number of axes: 5 - NC rotary table: Ø 800 mm - A/C axes: Kessler torque drive - Swivel range A-axis: ±120° - Maximum spindle speed: 18,000 rpm - Tool holder: HSK-A63 - Tool magazine: 96 tool positions - Internal coolant (IKZ): 80 bar - Measuring systems: Direct absolute measuring systems in all axes, with air purge Equipment - Heidenhain handwheel HR 410 - Kessler A/C axes with torque drive - NC rotary table Ø 800 mm - Internal coolant 80 bar - Paper band filter system - Coolant gun - External cooling of the milling head via nozzle ring - Compressed air via nozzle ring and spindle center - Heidenhain 3D probe - BLUM laser for tool measurement - Automatic cabinet roof - Operating mode 4 - Signal light - Bed flushing - Coolant temperature control Operating hours - Control system switched on: 40,822 h - Machine switched on: 40,073 h - Program run: 20,017 h - Spindle S1: 17,354 h Condition / Notes The machine has two tool magazine chains with a total of 96 tool positions. One of the two magazine chains is defective. The further technical condition and functionality must be checked during an inspection. Inspection possible by arrangement. Nedps Afz S Tefx Ai Tswn All information is without guarantee. Subject to prior sale.

Condition: used, Year of construction: 1986, longitudinal travel 1200 mm vertical movement 600 mm cross travel 450 mm table-size 1500 x 600 mm max. table load 2 t spindle taper ISO 50 spindle drive 15 kW Nsdpsxukppofx Ai Tjwn speeds 6 - 4000 U/min feeds 2 - 2500 mm/min rapid traverse 10 m/min voltage 400 V Bed milling machine with swivable spindle to horizontal or vertical. Control: Heidenhain TNC 155. Machine has an additional horizontal 4th axe.

Condition: used, Year of construction: 1984, x-travel 300 mm y-travel 160 mm z-travel 340 mm digital readout 3 Achsen HEIDENHAIN spindle taper ISO 40 spindle turning speed range 40 - 2000 U/min quill stroke 60 mm table-size 600 x 210 mm Nwsdpjzz S Duofx Ai Ton feeds -stepless- 5 - 500 mm/min rapid traverse 1200 mm/min power capacity 1,6 - 2,0 kW table load 200 kg voltage 400 V weight of the machine ca. 800 kg dimensions of the machine ca. 1,15 x 1,15 x 1,65 m electric cabinet 0,60 x 0,35 x 0,90 m !!! ATTENTION !!! EXCELLENT CONDITION !!! This machine comes from a vocational school! - Serialä-No.: 2102-2445 - 3-axis active digital display HEIDENHAIN TNC 116 - Rapid traverse - Machine light

Condition: defective spare-parts repository (used), Year of construction: 2001, functionality: not functional, machine/vehicle number: 5251, Offer 22065 Defective milling machine with gearbox damage Technical data: - Table size 950 x 450 mm - Working range of the axes: - X (longitudinal) 560 mm - Y (transverse) 320 mm - Z (vertical) 400 mm - Max. distance milling spindle – swivel table 510 mm - Tool holder SK 40 - Adjustable spindle speeds in 18 steps 25 - 2000 rpm - Drilling spindle stroke 100 mm - Feed rate of the axes up to 1200 mm/min Nsdj Af Idqjpfx Ai Tjwn - Rapid traverse - Drive 400 V / 3 kW - Space requirement approx. W 1200 x H 1650 x D 1000 mm - Weight approx. 1700 kg - Including: - 3-axis digital display - Coolant system - Fixed swivel table

Condition: good (used), TOS CNC CONSOLE MILLING MACHINE WITH CNC CONTROL HEIDENHAIN TNC310 TYPE: FV30 MACHINE NO.: 203300233 YEAR OF MANUFACTURE: 1998 Technical data: Njdpfx Aezlg N Tsi Tewn Longitudinal travel – X-axis: 760 mm Transverse travel – Y-axis: 381 mm Vertical travel of the quill – Z-axis: 152 mm Vertical travel of the console: 450 mm Table size: 305 x 1300 mm Max. workpiece weight: 360 kg Spindle mounting: ISO40, DIN 69871 A Speed range: continuously variable, 100-4000 min-1 Drive power: 5.5 kW (7.5 kW / 5 min.) Weight: 2700 kg Equipment: - CNC path control HEIDENHAIN TNC310 - Electronic handwheel - Pneumatic tool programming - Automatic central lubrication for guides and ball screws - Coolant system, capacity 42 l - Machine light - Various tool holders - Standard accessories - Documentation - CE conformity

Condition: used, Original ZEISS CMM Probe Holders and Stylus Extensions Original ZEISS probe holders Stylus extensions Various star styli and straight styli As shown in the pictures Condition: Used Nwedpfx Ajzg Eczsi Tjn Good working condition Carefully removed from a functioning ZEISS CMM Ideal for ZEISS CMM users looking for original replacement or additional probing equipment.

Condition: like new (used), Year of construction: 2004, Retrofitted: 2026 Nodpfx Ao Admb Rei Tewn Numerical control: HEIDENHAIN TNC-i530 Technical features Dimensions Table dimensions: 2000 x 900 mmNumber of T slots: 5T slots dimensions: 22 mm Traverses of axis X axis traverse: 2000 mmY axis traverse: 1000 mmZ axis traverse: 1000 mm Milling head Head type: Manual milling head (U22)Tool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871) / Pull stud: DIN 69872Speed range: 3000 rpmSpindle power: 22 kW Feedrates Rapid feedrate (X / Y,Z): 20000 / 12000 mm/min Weight and dimensions Maximum weight on table: 3500 kgMachine weight approximate: 14000 kgMachine dimensions approximate: 6367 x 5070 x 2803 mm Accessories Guarding: 2 sliding doors and new perimetral wire-mesh fenceTool pedal: new foot clamping tool pedalElectronic handwheel: New HR-510Coolant: external Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features