Used Rollforming Line 16 Stations for sale (25,842)

Condition: used, 72″ x .187″ x 50,000Lb Paxson Loop Slitting Line Make: Paxson Material Width: 12″ – 72″ (Uncoiler 60″) Material Width: .010″ – .187″ Coil Weight: 50,000Lb Coil ID: 20″ – 24″ Coil OD: 72″ Speed: 500 /1000 fpm Direction: Right to Left Material Strength: 40,000 yield / 50,000 psi shear Material: CR, HR, Galvanized Entry Transfer Cart Bdedoihf Ufopfx Afweg Entry Coil Car Mandrel Uncoiler Powered Hold-Down Roll Powered Expansion Sliding Base Hydraulic Peeling Table Driven Pinch Rolls

Condition: used, Slitting line McKay 60''x0.625''x100,000Lb Bdedpfxjlwtzys Afwog Make: McKay Material Thickness: .065″ – .625″ Maximum Material Width: 66″ Weight Capacity: 100,000Lb Coil ID: 24″ – 30″ Exit ID: 30″ Coil OD: 90″ Maximum Speed: 450 fpm Direction: L-R Pit Type Entry Coil Car Double Mandrel Uncoiler with Hold-Down Roll Hydraulic Peeler Driven Pinch Rolls Coil Flattener with 200HP Drive Slitting Head with 16″ Arbor Diameter 250HP Drive Knives & Tooling Two (2) Scrap Choppers Recoiler with Over-Arm Separator 250HP DC Drive Exit Pit Type Coil Car Electrics, Hydraulics Controls, Tooling

Condition: used, Cut-to-length line Delta-Alcos 72”x0.5”x60,000Lb (A3770) Make: Delta / Alcos Material Width: 36" - 72" Thickness Capacity: .048" - .530" Weight Capacity: 60,000Lbs Coil ID: 16" - 24" Coil OD: 72" Yield Strength: 50,000PSI Direction: Right to Left Coil Storage Conveyor Entry Coil Car Hydraulic Lift and Traverse Cone Uncoiler DC Motorized Brake Sliding Base Wichita Cooled Brake Powered Hold-Down Roll Hydraulic Peeling Table Powered In & Out Set of Driven Pinch Rolls Delta Corrective Plate 4-Hi Leveler Number of Work Rolls: 9 Work Roll Diameter: 8" Work Roll Width: 82" Powered Up & Down Back-Up Flights Bdsdjixqg Nopfx Afwjg DC Motor & Drive Delta Corrective 4-Hi Leveler Number of Work Rolls: 19 Work Roll Diameter: 4" Work Roll Width: 82" Motorized Back-Up Flights Powered Work Roll Adjustment DC Motor & Drive Alcos Mechanical Shear Down Cut Shear Driven Entry Pinch Rolls Pneumatic Clutch & Brake AC Motor Drive Alcos Drop Type Stacker 40' Sheet Length Driven Exit & End Conveyrors Touch Screen Digital Panel Operator Push Botton Station Digital Read Outs Hydraulics, Electrics, Controls, Presently Installed

Condition: used, Coil Width: 12″ – 60″ Material Thickness: .015″-.135″ Coil ID: 20″-24″ Speed: 180 fpm Direction: Left to Right Entry Floor Standing Coil Car Mandrel Uncoiler with Powered Expansion Motorized Hold-Down Roll Feed-Up Drive Hydraulic Peeler 9-Roll Coil Straightener with 4″ Work Rolls Driven Entry Pinch Rolls 40HP Motor Adjustable Hump Table Bsdpfx Afeihf Tpowodg Mechanical Shear Belt Conveyor with Positive Stop Device Air Gate Sheet Stacker, with Two Section of Gravity Rolls

Condition: used, 72″ x .187″ x 20,000Lb Universal Slitting Line Material Width: 12″ – 72″ Material Thickness: .015″ – .187″ Coil Weight: 20,000Lb Coil ID: 20″ Coil OD: 72″ Direction: Left to Right Bedeihf Twjpfx Afwjdg Entry Floor Standing Coil Car L-Type Design Hydraulic Lift & Traverse Mandrel Uncoiler Powered Hold-Down Roll Hydraulic Expansion Air Cooling Brake Sliding Base Hydraulic Peeling Table Slitting Head Arbor Diameter: 7″ Powered Arbor Adjustment 100HP DC Motor Knives & Tooling Recoiler Powered Push-Off Hydraulic Over-Arm Separator Hydraulic Expansion 100HP DC Motor Exit 2-Arm Turnstile Arm Width: 72″ Powered Rotation Complete Slitter with Electrics, Hydraulics, Controls, Tooling

Condition: used, 72”x 0.5” x 60,000Lb Braner Turret Type Loop Slitting Line Braner Turret Type Loop Slitting Line is used for coil metal cross cutting with maximum width 72”, maximum 0,5” metal thcikness and 60,000Lb coil capacity Make: Braner Year New: 1996 Material Thickness: .060″ – .500″ Material Width: 12″ – 72″ Coil Weight: 60,000Lb Line Speed: 120 – 250 feet per minute Coil ID: 20″ – 24″ Coil OD: 75″ Slitting Cap: .500″ / 4 cuts – .125″ / 40 cuts Entry L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Control Panel Bsdpfx Ajrn Sqhsfwsdg Mandrel Uncoiler Powered Hold – Down Roll Outboard Bearing Support Hydraulic Feed-Up Drive Water Cooled Brake Hydraulic Peeling Table Driven Entry Pinch Rolls Adjustable Edge Guides Entry Mechanical Crop Shear Two Turret Type Slitting Heads Arbor Diameter: 12″ Powered Arbor Adjustment Powered Head Rotation Motor: 100HP DC Drive Lots of Knives & Tooling Two (2) Scrap Winders Powered Open / Close Heavy Duty Design Looping Pit Cross Over Table Drag Board Tension Stand Material Feeding Table Recoiler Hydraulic Drum Powered Push Off Hydraulic Over-Arm Separator Outboard Bearing Support 300HP DC Motor Drive Exit L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Upgraded Siemens Digital Drives, Electrics, Controls, Knives & Tooling

Condition: excellent (used), Rademaker block processor with Rondo make up line. Has been producing 'Salmon en croute' for major UK supermarkets. Whole line is in lovely condition and can obviously be easily adapted to run other products like pasties, sausage rolls etc. Mainly used seasonally so only 11,800 running hours. Bdjdsiabu Uspfx Afwsg

Condition: good (used), Matcon IBC Discharge cone Bdodpfjtxrb Ajx Afwjg Stainless steel, 1000L, IBC discharge stations, 4 in stock

Condition: used, mileage: 418,933 km, power: 405 kW (550.65 HP), first registration: 11/2018, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x4, wheelbase: 3,400 mm, fuel: diesel, brakes: intarder, color: white, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2018, Equipment: air conditioning, electric window regulation, fridge, Front axle: Tyre size: 385/65R22.5; Suspension: leaf suspension Rear axle 1: Tyre size: 315/80R22.5; Double wheels; Suspension: air suspension Rear axle 2: Tyre size: 315/80R22.5; Double wheels; Suspension: air suspension Drive: Wheel Number of cylinders: 6 Empty weight: 10.453 kg Carrying capacity: 15.547 kg GVW: 26.000 kg Engine type: Volvo D16 Bodpfx Afozxprkewedg = Additional options and accessories = - PTO - Tipper hydraulics

Condition: used, -Dimensions: 1100x650x865 mm -Tank size: 500 mm diameter, 150 mm depth -Serial number: C2171910002 -Manufacturing date: 10/2019 -Temperature: -30°C/-35°C -Voltage: 230V -Frequency: 50Hz -Ice production: 25 L/h Bdodpfsw N Scbjx Afweg Nsy Tdxew N Scbsugoda -Weight: 90 kg

Year of construction: 2025, condition: used, functionality: unexamined, Complete Automatic Roll Forming Line (fully compatible with all Unistrut products) Year of manufacture: 2025 Model: CIRF-2019-2486 Unistrut 41 x 41 and 41 x 21 profile Approximately 15 meters per minute UK / Irish wiring standard (UK wiring schematics, safety pull cord system around main beds) Bdedpjzc Hkgefx Afweg with 2-ton de-coiler 3-stage, 3-ram punching unit (Hole Size: Approx 12mm × 25mm / Hole Spacing: Approx 50mm centers) Fully automatic upstroke shear Auto Hydraulic Logo printer/stamper Discharge table Overall Length: Approximately 30 meters

Condition: used, all stainless steel water circulation net belt length 9.000 mm Bodpfx Afozxqvqjwedg net belt width 900 mm adjustable speed lifting unit with electrical hoists dimensions (l x w x h): ± 11.500 x 1.600 x 3.000 mm + "IGEFA" tube heat exchanger Type 161U-159-159 380 kW + Conveyor belt with flights belt width: 800 mm distance between flights: 190 mm height of flights: 50 mm

Condition: used, all stainless steel water circulation net belt length ± 10.500 mm net belt width 900 mm adjustable speed lifting unit with electrical hoists dimensions (l x w x h): ± 11.500 x 1.600 x 4.000 mm + "IGEFA" tube heat exchanger Type 161U-159-159 380 kW + Conveyor belt with flights belt width: 800 mm distance between flights: 190 mm height of flights: 50 mm Bdjdezxqrrepfx Afwsg

Condition: used, all stainless steel water circulation net belt length 10.000 mm net belt width 1.400 mm adjustable speed lifting unit with electrical hoists dimensions (l x w x h): ± 11.000 x 2.100 x 3.000 mm Bdedpezxqq Ujfx Afwsg + "IGEFA" tube heat exchanger Type 161U-159-159 380 kW + Conveyor belt with flights belt width: 1.200 mm distance between flights: 200 mm height of flights: 85 mm

Condition: used, Norpak Magazine Sorting and Polywrapping Line, Variable Size Infeed Hopper A4 - A5, In Leaf Capability, 4 Document Feeder A4 - A5, Poly Wrap Station with Heated Sealer Bars & Cut Off, Outfeed Conveyor, 8m x 3m Foot Print, Including Extraction System. S/No. 0701047 (Selection of Polywrap & Potato Starch film) Highest bid is subject to vendors approval. Bsdpfx Afezwntqewedg Please Note: This lot is located in Birmingham, UK. A charge of £300 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: ready for operation (used), Manufacturer: Handtmann / Stiller Model: VF830 Year: 2020 Condition: Used Serial number: 44613 Stock number: 3427P Filling pressure: up to 25 Bar Pump capacity: max 6000 kg/h Power: 3 x 400V, 50Hz, 6kW Dimensions: 2300 x 1500 x 2150 mm Weight: 1550 kg Infeed rotary table for empty cans Diameter: 1200 mm Bdodpfx Afszxrx Hewjg Handtmann / Verbufa filling machine for cans Type: 52088-A-0084 Serial number: 261960 Year of manufacture: 2020 Can diameter: 73 & 99 mm Power: 3 x 400V, 50Hz, 1.6kW Weight: 400 kg Double-head filling machine with Handtmann FST547 waterwheel With filling station and conveyor belt of 3200 x 2000 x 2200 mm Stiller can seaming machine Type: STA2000 Serial number: 20012 Year of manufacture: 2020 Capacity: up to 2000 cans/h Can diameter: 73 & 99 mm Can height: 30 - 300 mm Compressed air: 6 - 8 Bar Power: 3 x 400V, 50Hz, 3.6kW Dimensions: 2600 x 1100 x 2000 mm Weight: 570 kg Including conveyor belts and a rotary table with a diameter of 1200 mm.

Condition: used, Consisting of: “Ishida” Multihead weigher Type CCW-M-214W-S/50-SS Heads: 14 pieces Performance: up to 2 x 30 weighing’s/min Filling weight (max. weight): 10.000 g Accuracy: Average value 0 to +3.0 g Weighing range: 5 - 10.000 g Max. volume: 12.500 cc (per individual weighing) Minimum division: 1g Display: Touch-screen display Power: 230V, 50Hz Connected load: 1,6 kW In good condition + Vertical flowpackaging line “Rovema” Type VPK360 - 14115 yoc 2001 Performance (mechanical) cycles/min: 120 roll width / diameter (max.) (mm): 770/450 (770 / 600 with front rollers) bag width (min. – max.) (mm): 80-360 Bag length (min . – max.) (mm): 200-600 Filling volume (max.) (cm³): 12000 Seal pressure (max.) (N ): 6000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: ( L x W x H) (mm): 2,435 x 1,680 x 2,015 mm Weight: 1,500 kg Mains connection (Volt): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C) : +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Humidity (max. ) (%): 15…95; no condensation in good condition + Vertical flowpackaging line “Rovema” Bdsdpjzxdqzofx Afwjg Type VPK360 - 14116 yoc 2001 Performance (mechanical) cycles/min: 120 roll width / diameter (max.) (mm): 770/450 (770 / 600 with front rollers) bag width (min. – max.) (mm): 80-360 Bag length (min . – max.) (mm): 200-600 Filling volume (max.) (cm³): 12000 Seal pressure (max.) (N ): 6000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: ( L x W x H) (mm): 2,435 x 1,680 x 2,015 mm Weight: 1,500 kg Mains connection (Volt): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C) : +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Humidity (max. ) (%): 15…95; no condensation in good condition + carton box former – Packaging machine “Paal” Type ELLE 3000 S Working capacity: Max. 14 cycles / minute Infeed capacity: Max. 34 bags / minute Format1 : Tray with sleeve Filling material designation: Stand-up pouch 4.0 kg Filling material dimensions: Approx. 240 x 105 x 370 mm Filling weight: 4.0 kg Grouping scheme: 1 x 3 standing Packaging type: Tray with internal, glued-in cover and cover protection Dimensions: Inlet height of filling material: 650 mm Outlet height of package: 500 mm Installation area: approx. 8000 x 6500 mm Please refer to the installation plan for the main dimensions (photo attached) 3 x 400V, 50Hz, 5kW Packaging machine: Type: Elematic 3000 LS/335 in good condition

Condition: used, Consisting of: “Thermopac - WANSON” thermic oil installation Type 200B 10 FT container natural gas burner power: 233 kW 3 x 400 V, 50 Hz 7.5 kW dimensions (L x W x H): ± 3,000 x 2,450 x 2,600 mm + Thermal oil pump Bathyscaphe Flue gas exhaust stack + “GEA-CFS” fryer Type BR 6000/600 all stainless steel suitable for thermal oil heating infeed height : ± 900-950 mm outfeed height : ± 1.150 mm max. oil level above the belt : 120 mm suitable for fire protection with top hold down belt Oil circulation system net belt length 6.000 mm net belt width 600 mm adjustable speed sediment removal system filter lifting unit with electrical hoists dimensions (l x w x h) : ± 8.700 x 2.200 x 3.800 mm “Saval” fire suppression system Bjdszxdkzopfx Afwjdg + Paper filter Type OMR 120-60 50 Hz - 400 V 4.5 kW 525 kg dimensions (L x W x H): ± 2.800 x 1.700 x 2.200 mm + Cooling conveyor with ambient temperature all stainless steel variable speed 50 Hz, 400 V 2.61 kW net conveyor length ± 6.000 mm net conveyor width ± 900 mm wire mesh belt (3 mm) dimensions (L x W x H): ± 7.600 x 1.700 x 2.000 mm

Condition: good (used), Complete Resaw Line from intake to stacker with an AKE TB2B twin rebandsaw Bjdpsm Uylpefx Afwodg

Condition: used, machine/vehicle number: 008157, Position 1: Brushing Machines GIARDINA-1VE - 300 Position 2: Sprayers GIARDINA-1VE - 300 Position 3: Panel Feeding and Loading GIARDINA-1VE - 300 Bdodpfow Sdu Ujx Afwjg

Condition: excellent (used), Year of construction: 2012, Inline cooking line for pasteurizing processed cheese, heating from the initial mixing temperature to approximately 85°C for filling or further processing. The line consists of: Buffer Tank The buffer tank is used for the temporary storage of processed cheese prior to further processing or filling. The product is maintained at approximately 15°C to preserve quality and ensure optimal viscosity. This stabilizes the process flow, balances fluctuations in upstream and downstream operations, and helps maintain consistent product properties. Volume: 400 kg Model: Zufühfbehälter 400 Type: 670 Machine No.: 14616 Installed power: 22 kW (46A) Year of manufacture: 2012 The buffer tank is equipped with: - Tank with 2 feed augers, CIP cleanable. - Stainless steel covers - Load cells for weight indication on the buffer - Outfeed pump Bdodpfx Ajzxc Dmofwjg - CIP return pump (Fristam model: FPE3532/155, 7.5 kW) Inline Cooker The inline cooker is used to continuously heat and process the cheese mixture from approximately 15°C to 85°C. During this step, the product is thermally treated and homogenized by a high-shear mixer to ensure optimal mixing of steam into the product and to achieve the desired structure and consistency. This ensures efficient processing, uniform product quality, and a stable flow for downstream operations. Heating unit specifications Model: FL / Erhitzungseinheit Type: 261 Machine No.: 14217 Installed power: 17 kW (37A) Year of manufacture: 2012. The controls are excluded.

Condition: used, Year of construction: 2004, operating hours: 7,855 h, lifting height: 4,610 mm, free lift: 1,440 mm, fuel type: electric, mast type: triplex, fork length: 1,000 mm, fork width: 1,040 mm, total height: 2,080 mm, total length: 2,090 mm, total width: 1,080 mm, color: yellow, Empty weight: 3.521 kg Lifting capacity: 1.600 kg - Year: 2004 - Documentation available: Yes - └ Type Documentation: User manual - CE marking present: Yes - CE certificate present: No Bjdpfx Ajzm Ufrefwedg - Serial number: 516050000714 - Operating hours: 7855 - Lifting capacity: 1600kg - Lifting height: 4604mm - Overhead clearance: 2080mm - Free lift: 1440mm - Fork length: 1000mm - Maximum fork width: 1040mm - Minimum fork width: 240mm - Number of wheels: 4 Wheels - Attachment: Side-shift - Options: Work lights, Free-lift - Mast: Triplex - Drive: Electric - Battery information: - └ Brand/Type: Hoppecke - └ Capacity: 465Ah - └ Battery voltage: 80V - └ Battery test result: 45% - └ Tray length [mm]: 1020 - └ Tray width [mm]: 560 - └ Tray height [mm]: 560 - Transport dimensions: 2092mm x 1084mm x 2080mm (l x w x h) - Transport weight [kg]: 3521kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: good (used), Schlebach Mini Prof Plus ☑️Immediately available, no delivery time☑️ Universal machine for the production of double standing seam profiles 25 from sheet material, coils, or cut-to-size pieces in a single pass. The machine is equipped with: ✅ Profiling rollers for 25mm seam height ✅ 230V connection ✅ A manual slitting shear RS for cross-cutting ✅ A slitting knife LS for cutting to width ✅ An electromechanical counter (accurate to the cm) ✅ Bending capacity: 0.8mm (zinc, aluminum & copper), 0.7mm steel sheet Condition: • Good technical condition • Good optical condition • Weight: approx. 315kg Bsdpfx Aozxrg Refwsdg An inspection and test run are possible by arrangement. The price is €14,250 net, plus VAT, totaling €16,957.50 gross. You will receive an invoice with VAT shown.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, overall weight: 12,000 kg, input voltage: 415 V, input current: 70 A, input frequency: 50 Hz, Complete 2010 Rademaker Pie Line, capable of producing up to 5,280 filled savoury pies (with lids) per hour. Manufacturer - Rademaker B.V. Maximum mechanical speed – up to 22 strokes / minute. Output capacity – up to 5,280 pies / hour. Electrical requirements – 415 V / 50 hz / 3 phase. Power – 70 Amps (approx.). Weight of complete line – 12,000 kg. This production line comprises of the following equipment/machinery: 1. 2 x sets of tooling complete with trollies, one set for pies with casing diameter of 110mm. 2. Electrical control panel (with data plate ‘PIE LINE’ on). 3. Inclined flighted conveyor for loading of pastry sheets. 4. Overhead transfer conveyor (used to feed 'STRIPFEEDER') operating at 2.4m high along the length of the line. 5. Rademaker ‘STRIPFEEDER’ with denester for dropping pie cases. 6. Rademaker Tamping unit 1 (used to tamp the dough round into the pie casing). 7. Rademaker ‘DEPOSITOR’ 6-lane depositing system with hopper and pump. 8. Rademaker ‘TAMPING UNIT’ 2 for tamping filling down into casings. Bodpezvmy Hofx Afwedg 9. Rademaker ‘LID DOUGH CONVEYOR’ for dropping lids onto filled pies. 10. Dutch Thermal Engineering b.v. (DTE) V-009.0 thermostat for regulating temperature of water bath sat under main conveyor holding pie casings. 11. Rademaker Crimping unit / marking unit for putting pattern into casing lid and ensuring it is secured onto pie. 12. Rademaker Pie exit/discharge conveyor. 13. Rademaker ‘DOUGH RETURN SYSTEM’ for excess pastry. 14. Rademaker ‘SPOT DEPOSITOR’ for 5-across over line depositing. 15. Unnamed egg-glaze mixing vessel and pump, mounted on mobile frame. NOTES – BUYER TO REMOVE FROM SITE.

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 9,385 h, load capacity: 18,000 kg, lifting height: 3,600 mm, fuel type: diesel, mast type: simplex, construction height: 3,650 mm, fork carriage width: 1,600 mm, fork length: 1,600 mm, empty load weight: 29,590 kg, total length: 6,900 mm, drive type: Diesel, construction width: 2,650 mm, Side loader Load center: 800 Fork width: 200 mm Fork thickness: 100 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tire type: Pneumatic Front tire size: 16.00-25 Rear tire type: Pneumatic Bjdpfx Afozxu D Sowjdg Rear tire size: 16.00-25 Description: In addition to this Bulmor model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Lease-purchase and financing options are available at favorable terms. We would also be happy to buy your used forklift outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this DQ180/16/35. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom modifications for forklifts from 8 tons upwards. We would also be happy to offer your vehicle for consignment sale at our location. Heater, full cabin, Platform height: 1,670 mm; front/rear camera; Webasto