Used Ruwac Ds 1220 M for sale (70,786)

Condition: used, mileage: 32 km, power: 90 kW (122.37 HP), first registration: 08/2026, fuel type: diesel, overall weight: 2,400 kg, color: grey, gearing type: mechanical, number of seats: 2, total length: 4,853 mm, total width: 1,855 mm, total height: 1,842 mm, loading space length: 2,001 mm, Year of construction: 2026, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal number: 4266.NW26.X027423 Errors and prior sale excepted! ----SPECIAL EQUIPMENT * Towing hitch, fixed - incl. ESP trailer stabilization and continuous power supply * Wheels: All-season tires. The tires are marked with the "3 Peak Mountain Snow Flake (PMSF)" snowflake symbol. * Sliding door, left and right * Seat package 56: Driver and passenger seats individually and variably heated - steering wheel, heated - driver and passenger seats 4-way manually adjustable - lumbar support for driver, 2-way adjustable - passenger seat, foldable with integrated work surface - airbag package, consisting of head and shoulder airbags, and side airbags for driver and passenger * Auxiliary heater, fuel-powered, programmable via on-board computer FURTHER EQUIPMENT * Airbag, driver and passenger side * Airbag: Passenger airbag deactivation function * Alcohol interlock (preparation) * All-wheel drive * ABS - with ESP, hill start assist and traction control * Exterior mirrors elect. foldable, adjustable and heated * Floor covering, rubberized, front * On-board computer * Roof storage compartment, front * Roof rails, preparation kit * Theft/alarm system with interior monitoring * Diesel particulate filter with SCR catalytic converter and AdBlue tank * Double-wing tailgate with 180° opening angle (without window) * Remote control: 2nd remote control key for central locking * Windshield, heated * Glove compartment with lid, illuminated * Interior lighting, front with delay switch and two reading lights * Interior lighting, cargo area - 2 LED lights * Air conditioning with automatic temperature control (2-zone) for driver and passenger side, separately adjustable * Cargo area floor: vinyl floor covering * Charging station, inductive * Steering wheel: Multifunction leather steering wheel * Steering column, adjustable in height and reach * Headlight range adjustment * Fog lights with static cornering light * Package: Driver Assistance Package 3 KeyFree system with Ford Power Start function - Intelligent Adaptive Cruise Control IACC - Blind Spot Assist with Cross Traffic Alert - Emergency braking function - Exit warning - Pre-Collision Assist, pedestrian and cyclist detection - Traffic sign recognition - Driver drowsiness warning - Lane Keeping Assist - Park Pilot system front, rear - Rear view camera - Hill start assist - 10-inch touchscreen, DAB/DAB+ and navigation - 10.25-inch digital instrument panel - FordPass Connect, eCall emergency call assistant - Android Auto, Apple CP 2 USB-C with voice control * Upholstery: Fabric * Tire pressure monitoring system * Wheels: Alloy wheels 7 J x 17 with 215/55 R17 tires * Wheels: Tire repair kit * Windshield wipers with rain sensor * Headlights - low beam: Halogen headlights with daytime running lights * Headlight assistant with day/night sensor * Side wall cladding, half-high * Power steering, electro-mechanical EPAS * Seatbelts, front Hjdpjzp Atcofx Ab Tst * Sun visor, driver and passenger - with mirror and ticket holder, not illuminated * Start-stop system * Dust and pollen filter - without activated carbon filter * Socket: 12-volt socket - 1x front and 1x in the cargo area * Daytime running lights * Partition, full, without window (plastic) * Door interior trim, front - with illuminated switches including door compartments for 1.5 L bottles * Immobilizer, electronic * Central locking with remote control * Auxiliary heater, electric ... and more. ----1st owner. German version. Errors and prior sale excepted. 2 years manufacture

Condition: used, mileage: 65,514 km, power: 150 kW (203.94 HP), first registration: 07/2022, fuel type: diesel, overall weight: 3,200 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 4,904 mm, total width: 1,904 mm, total height: 1,970 mm, loading space length: 2,498 mm, Year of construction: 2021, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), parking heater, soot filter, Errors and prior sale excepted! Internal number: 1009. X017481 ---EQUIPMENT * SYNCRO-System workshop interior with various shelves and vice * Roof rack with loading roller * Fixed towbar - incl. trailer stabilization * Battery/generator capacities: standard battery and enhanced alternator * Gross weight: Permissible gross weight 3.2 t with 17" steel wheels - 4 steel wheels 7 J x 17 for vehicles with 3.2 t GVW - Permissible gross weight 3,200 kg - Suspension and damping for vehicles with 3.2 t permissible gross weight - Center wheel cover - Reinforced on-board tools and jack for vehicles with 3.2 t GVW * Glove compartment with lighting * Rear wing doors without windows - Rear doors without window cutouts - Rear door locking with interior release function - No rear window - No interior safety mirror * Rear door locking with interior release function * Partitions: High partition without window and 8 lashing eyes for load securing - High partition - No child safety locks in passenger compartment - Reinforced lashing eyes for securing cargo (ISO 27956) * Seat configuration - 3. Seat adjustments: Height adjustment for left single seat in cab * Air conditioning in cab with electric control * Seat configuration - 4. Lumbar supports: manually adjustable lumbar support for left single seat in cab * Lighting and visibility - Automatic dimming interior safety mirror - Daytime running lights with auto headlight control, "Leaving home" function and manual "Coming home" function - Intermittent wiper control with rain sensor for front windscreen wipers * Differential lock - Mechanical rear axle differential lock * Steering wheel: 3-spoke multifunction leather steering wheel * Multifunction display: Digital cockpit and fatigue detection * "Discover Media" radio navigation system including streaming & internet - Voice control - 2 USB interfaces (Type C) in dashboard - "Discover Media" radio navigation system with 20.3 cm (8 inch) touchscreen including "Streaming and Internet" - Navigation function/preparation - 4 speakers: 2 tweeters, 2 woofers - Wired & Wireless App-Connect * Fog lights including cornering light * Exclusion: No child safety lock in passenger compartment * ParkPilot in front and rear area * ParkPilot for rear area * Tire pressure monitoring display * Driver assistance systems: Rear view camera (static lines) * Reinforced lashing eyes for securing cargo (ISO 27956) * Auxiliary heaters: Water auxiliary heater with programmable stationary heating function * Auxiliary heaters: Water auxiliary heater with programmable stationary heating function - with remote control * 2 speakers (full-range) * Driver and passenger airbags * All-wheel drive 4MOTION (permanent) * Exterior mirrors electrically adjustable and heated * Exterior mirrors, left and right convex * Hill start assist * Third brake light * Green-tinted windows * Tachometer * Three-point automatic seat belts * ESP Electronic Stability Program * Chassis: 17" chassis and braking system * Electric windows (2) * Fresh air system with multistage fresh * Transmission: DSG 7-speed automatic * Rubber flooring in cab * Glove compartment with lockable lid * Tailgate without window * Heating with electronic control * Child lock, electrically operated * Headrests * Fuel tank with 70 l capacity * Paintwork: Solid color Hjdpfjxrxbnsx Ab Tst * Headlight range adjustment * Multi-collision brake

Condition: excellent (used), mileage: 181,733 km, power: 110 kW (149.56 HP), first registration: 03/2020, fuel type: diesel, tire size: 205/65R16, axle configuration: 4x2, wheelbase: 3,000 mm, fuel: diesel, CO₂ emissions: 156 g/km, fuel tank capacity: 75 l, color: white, gearing type: automatic, number of gears: 7, emission class: euro6, number of seats: 3, total length: 4,900 mm, total width: 1,900 mm, total height: 1,970 mm, permissible axle load (axle 1): 1,600 kg, permissible axle load (axle 2): 1,550 kg, Year of construction: 2020, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, electric window regulation, fog lights, navigation system, power assisted steering, power mirror, sliding door, traction control, trailer coupling, General information Number of doors: 4 Cab: single Registration number: VFD-82-J Technical information Number of cylinders: 4 Engine capacity: 1.968 cc Transmission Transmission: DSG, 7 gears, Automatic Axle configuration Tyre size: 205/65R16 Hjdpfxovdb I Es Ab Tjt Brakes: disc brakes Suspension: coil spring suspension Front axle: Max. axle load: 1600 kg; Steering; Tyre profile left: 80%; Tyre profile right: 80% Rear axle: Max. axle load: 1550 kg; Tyre profile left: 80%; Tyre profile right: 80% Weights Empty weight: 1.838 kg Carrying capacity: 962 kg GVW: 2.800 kg Max. towing weight: 2.500 kg (unbraked 750 kg) Interior Interior: black Consumption Average fuel consumption (WLTP): 5,9 l/100km (48 MPG) Urban fuel consumption (WLTP): 6,6 l/100km (43 MPG) Extra urban fuel consumption (WLTP): 5,5 l/100km (51 MPG) Maintenance APK (MOT): New APK (MOT) upon delivery Condition Technical condition: very good Visual appearance: very good Damages: none Number of keys: 2 Additional information Please contact Moussa or Youssef for more information = Additional options and accessories = - Heated door mirrors - Parkingsensors back - Radio/Cd/Audio system - Side Door Right - Spare wheel - Stability control

Condition: used, mileage: 222,273 km, power: 150 kW (203.94 HP), first registration: 02/2018, fuel type: diesel, overall weight: 3,000 kg, color: red, gearing type: automatic, emission class: euro6, number of seats: 3, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, * First owner * Fully maintained according to service schedule * New engine including particulate filter installed at 98,753 km by VW workshop, invoice for €11,500 available * 204 hp engine with 7-speed automatic DSG transmission * 3000 kg gross vehicle weight * Reinforced suspension and damping * Long wheelbase version * LED headlights * Air conditioning * Multifunction steering wheel * Rearview camera * Parking sensors * Tow hitch * Power-assisted tailgate and sliding door * New TÜV (vehicle inspection) Special equipment: Trailer stabilization program, audio system Composition Media (radio/CD player, MP3 playback function), speakers (4), multimedia interface USB (iPhone / iPod) with AUX-IN, equipment package Light + Sight, automatic headlight activation, light assistant (coming home, leaving home), interior mirror with automatic anti-dazzle function, floor covering in the cargo/passenger compartment made of rubber, interior lights in the cargo/passenger compartment: step lights, electrical package 1, exterior mirrors electrically adjustable and heated, driver assistance system: parking aid rear with rearview camera, chassis: suspension and damping reinforced (version: rough road), freewheel coupling for dual-clutch transmission, remote key (4) foldable, rear lights LED, red, cargo area partition high without window, gear/selector lever knob leather, truck registration, Mobile Online Services App-Connect, mobile phone interface Comfort, multifunction display Plus, multimedia interface 2 x USB (iPhone / iPod) with AUX-IN, windshield washer nozzles heated and display for washer fluid level, windshield washer nozzles heated, display for washer fluid level, seat cover / upholstery: fabric Simora, seats in the cab: double passenger seat with storage compartment, seats in the cab: driver's seat height adjustable, seats in the cab: lumbar support driver's seat, steel rims 7x17, permissible total weight 3.00 t, power-assisted tailgate, power-assisted sliding door right Additional equipment: Sliding door trim cover, airbag passenger side switchable, airbag driver / passenger side, exterior mirror aspherical, left, exterior mirror convex, right, floor covering in the cab: rubber, driver assistance system: multi-collision brake, chassis 17", windshield laminated glass tinted, glove compartment lockable, tailgate without glazing, interior filter: pollen filter, body/structure: standard panel van, body variant: normal roof, fuel tank: 70 liters, steering column (steering wheel) adjustable, engine 2.0 liters - 150 kW TDI, non-smoker package, wheelbase 3400 mm, tire repair kit, low emission according to exhaust standard Euro 6, sliding door cargo/passenger compartment right, start/stop system engine, door storage compartment front, lining in the cargo/passenger compartment: hard fiber half-high, heat-insulating glazing Hsdpfjx Nz N Sox Ab Tot

Condition: used, mileage: 282,000 km, power: 110 kW (149.56 HP), first registration: 07/2021, fuel type: diesel, gearing type: automatic, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Viewing by appointment by telephone. Hodpfx Aeztucweb Tst

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 7,500 kg, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE A dewatering screen is a vibrating screen used in industries such as mining, sand and gravel, and construction to remove moisture from a mud mixture. By separating the solid particles from the water, dewatering screens provide an efficient way to process materials while reducing water usage and improving the quality of the final product. • Model: FABO DSHC-1635 Type - Dewatering Screen Hedpfx Abozvxmlo Tot - Capacity: 80-120 T/H - Size: 1650 x 3500mm - Screen Decks: 1 Deck 0.250 micron Polyurethane Screen - Screen Surface: 5.60 m2 - Screen Power/Spin: 2 x 7.5 kW 1000 rpm Vibro Motor - Screen Inclination angle: 8° - Stroke: 6-9 mm - Screen Side Sheet: ERD A1 Quality 12mm - Discharging pipe: 219 x 10 mm installation tube - Weight: 7500 kg FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Year of construction: 2003, condition: good (used), machine/vehicle number: 956-03-13, OFFER 21072 Technical specifications: - Load capacity of positioning table approx. 750 kg - Diameter of the rotary table 500 mm - Max. workpiece diameter 1600 mm - Height of rotary table in horizontal position approx. 750 mm - Rotary table with clockwise and counterclockwise rotation - Rotation axis of the rotary table, continuous 360° - Rotation time per revolution 12.5 sec - Tilting left and right - Tilting axis, tilting angle 180° - Tilting time for 180° tilting angle 10 sec - 2 x double foot switches for rotary table and tilting arm - Hydraulic clamping bolt for clamping the workpiece in the center of the rotary table - Clamping stroke/clamping travel of the clamping bolt 32 mm - Clamping force, pushing / pulling 80 / 48.9 kN - Clamping cylinder, internal thread M 27 x 40 - Positioning control SIEMENS Hsdpjgxmabefx Ab Tst - Operation manually or via control unit - Space requirement approx. W 1500 x D 2800 x H 1100 mm - Weight approx. 2500 kg - Separate control cabinet with high-frequency device for - High-frequency tools

Condition: used, maximum load weight: 32,491 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 09/2017, loading space length: 12,000 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, * 1st axle can be lifted * Edscha sliding tarpaulin * MEGA * Wabco Trailer EBS-E * BPW axles with disc brakes * Storage box ----* Tire dimension: 435/50R19.5 * Technical total weight: / * Tare weight: 6890 kg * Overall length: 13860 mm Hodoy Skluspfx Ab Tjt * Next inspection due: / ----Vehicle number: 12051----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed. We are happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional charge:----Trade-in of your old vehicle, TÜV/inspection approval, complete export processing, assistance with financing, application for export license plates, vehicle transport, vehicle registration, recovery and vehicle transport services.----?YOUR VTS TEAM

Condition: like new (used), Year of construction: 2021, operating hours: 300 h, 3x VE20 Microbond SCI 3x New Hodpfor Rdd Nex Ab Tst The parts have been in operation for approximately 200-300 hours. The MICROBOND CSI system, consisting of a feed unit, control system, and high-performance generator, guarantees consistent welding quality. Robust yet highly precise mechanics enable constant gap control thanks to the patented MicrogapControl gap control system. The MICROBOND control system controls and visualizes this continuous joining process. Constant amplitude output and high continuous sound power enable process speeds of up to 800 m/min.

Year of construction: 2007, condition: ready for operation (used), A Xiangfan/SPARK CNC large-format engine lathe is available. Swing diameter over bed/cross slide: 2200mm/1800mm, bed width: 1100mm, distance between centers: 8000mm, max. turning length: 7500mm, max. workpiece weight: 20t, max. workpiece weight between centers: 19t, main spindle bore: 140mm, bar capacity: 100mm, spindle speed: 200rpm, X/Z-axis travel: 920mm/7500mm, feed rate: 2m/min, rapid traverse: 3m/min, tool stations: 4, chuck jaw count: 4, chuck diameter: 2200mm, chip conveyor length: 8000mm, control: Siemens SINUMERIK 802D. Including coolant system, mandrel, chip conveyor and measuring system. Documentation available. An on-site inspection is possible. Hedszpywxspfx Ab Tst

Condition: new, ETEL TMB0291-050-3TDS-E82 torque motor, serial number, unused in original packaging, 100% functional, scope of delivery as shown in the photos. Hedpjlki Twjfx Ab Tot

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 8,900 kg, maximum load weight: 32,100 kg, overall weight: 41,000 kg, axle configuration: 3 axles, loading space length: 9,200 mm, loading space width: 2,520 mm, loading space height: 900 mm, total length: 13,300 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. Chassis, Low-loader Semi-trailer Steel welded construction, kingpin plate with 2 replaceable kingpins and 2 kingpin positions 24 tons, 2-speed landing gear, single-side operation, with straight lower part, without lateral support Foldable rear support 2 chock blocks with holder Aluminum side protection Fender fairings in front of and behind the axle assembly 1st pair of wheel recesses integrated into the gooseneck area in the low-bed section, angled for easy entry. Length at the bottom approx. 1600 mm, depth of wheel recesses approx. 260 mm. Note! Frame in the main beam area is 260 mm higher than the wheel recess. 2nd pair of wheel recesses between axles A and B. Length at the bottom approx. 350 mm, depth approx. 260 mm. Note! Frame in the main beam area is 260 mm higher than the wheel recess. If wheel loaders are to be transported and the overall height needs to be checked, please provide the technical data sheet for the wheel loader models with detailed specifications (if the overall height is exceeded). Wheel recess cover, retractable from the main frame, with wood inserts. Extensions retractable to 3,000 mm (not in the rear slope and not in the wheel recesses at the bottom) Storage compartment for timber planks on the gooseneck, across the front Timber planks, 70 mm, for extension to 3000 mm Tie-down points for low-loader 2 pairs of ring-type tie-down points, 5 tons each, at the front on the gooseneck Hedpfxoi Ri Hcj Ab Tst 11 pairs of tie-down eyes integrated into the top and side of the outer frame, 10 tons each 2 x on the gooseneck, 9 x distributed in the low-loader area, first tie-down point 250 mm from the front and last max. 250 mm from the rear, spacing between tie-down points not greater than 1100 mm 8 pairs of stake pockets integrated into the outer frame, inner dimensions 70 x 40 mm, or, instead of stake pockets, 5-ton ring-type tie-down points embedded in the floor Axles + Suspension SAF drum brake axles Axle/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension Wheels and Tires 235 / 75 R 17.5 Manufacturer's choice Steel rims in twin configuration, factory silver Braking System 2-line pneumatic braking system Spring-loaded parking brake EBS, Electronic Braking System with EBS socket at the front, without connection cable 2 keyed coupling heads at the front With raise and lower valve Axle load detection via EBS-CAN bus signal, for display on the dashboard in the cab; truck must be suitably pre-equipped. Vehicle - Driving Stability System Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole keyed sockets at the front 1 x LED rotating beacon with holder, switched via side lights 2 pairs of warning signs, double LED illuminated and retractable to 3,000 mm, detachable with connector Floor Gooseneck with steel/non-slip steel plate Storage box integrated into the access slope to the gooseneck Then with 70 mm softwood floor, in the wheel recesses at the bottom and in the wheel well area, steel/non-slip steel plate Low-loader platform including rear slope, 9,100 mm Ramps Steel ramps, 2,800 mm long, 750 mm wide, side-shiftable Additional ramp securing at the bottom.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 14,680 kg, maximum load weight: 35,320 kg, overall weight: 50,000 kg, axle configuration: 3 axles, loading space length: 10,300 mm, loading space width: 2,520 mm, loading space height: 600 mm, total length: 15,400 mm, total width: 2,550 mm, tire size: 235/75 R17,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Chassis: Low-loader semi-trailer Steel welded construction, kingpin plate with 2 replaceable kingpins 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without stroke compensation Folding rear support 2x chock blocks with holder Aluminum side impact protection Quarter panel fenders in front of and behind the axle assembly with splash flaps behind each axle 1x storage box, w=2,350 mm x l=730 mm x h=640 mm, mounted crosswise at the front on the floor of the gooseneck, with 2 storage trays Extendable widening elements up to 3,000 mm (not in rear slope)(However, the track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks on the gooseneck, at the front, crosswise Wooden planks 70 mm for widening to 3,000 mm Excavator arm recess starting above the rear axles to the rear, approx. 500 mm wide and approx. 230 mm deep Tie-down points: Low-loader 3 pairs of tie-down points, each 10 tons, at the front of the gooseneck, 8 pairs of tie-down points, each 10 tons, in the low bed, 3 pairs of tie-down rails in the wheel track area of the low bed, 3 pairs of tie-down points, each 10 tons, in the axle/rear area Axles + Suspension SAF drum brake axles Axle/chassis laser-measured, reducing tire wear and fuel consumption with steering axle Air suspension Wheels and tires 235 / 75 R 17.5 as chosen by the manufacturer Steel rims in twin arrangement, factory silver Braking system 2-line pneumatic braking system, color-coded lines for easy servicing Spring brake parking brake EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! 2 fail-safe coupling heads at the front, without connecting line with lift & lower valve, hold function in the lowered position + auto-reset function Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Vehicle - Driving stability system Trailer Info Center, for displaying vehicle data such as axle loads (no calibrated scale), mileage and diagnostic/system messages Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front in LED 2 white/red marker lights at the rear 2 x 7-pole fail-safe sockets at the front 1x additional LED work light at the rear Hodsi Ri Hgjpfx Ab Tet 1x LED rotating beacon with holder, switched via parking lights 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Gooseneck with steel/diamond plate covering in the wheel track area with 70 mm softwood floor, in the wheel arch area steel/diamond plate covering, low bed on the left and right in the wheel track area can be hydraulically raised for entry, via truck auxiliary drive Rear slope with 70 mm softwood floor Low bed length approx. 6,300 mm Side walls 25 mm aluminum hollow profile, 400 mm high, can be plugged into the front and side on the gooseneck Ramps Steel ramps 2,800 mm long, 750 mm wide Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown i

Condition: used, mileage: 512,000 km, power: 302 kW (410.61 HP), first registration: 04/2008, fuel type: diesel, empty load weight: 17,835 kg, maximum load weight: 15,165 kg, overall weight: 33,000 kg, axle configuration: 6x6, wheelbase: 3,820 mm, brakes: engine braking, color: red, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel, number of seats: 2, loading space length: 4,800 mm, loading space width: 2,420 mm, loading space height: 1,000 mm, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, crane, cruise control, differential lock, fog lights, low noise, onboard computer, power assisted steering, seat heater, trailer coupling, Vehicle location: Bovenden, steel body, registration as house, 1 comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, air horn, ABS (anti-lock braking system), constant throttle, PTO, raised exhaust, automatic transmission, differential lock, fog lights, high beam headlights, rotating beacon, leaf suspension, sideboards control left, sideboards control right, air+power trailer coupling, aluminum tank, low-noise G1, flap, doors, side aluminum underrun protection, roof hatch, crane behind cabin, emergency stop, grab control, foldable, elevated stand, 2-point hydraulic support, 2x hydraulic extensions, green environmental badge. Wheelbase: 3820 mm Body: 3-way tipper body with aluminum sideboard on the right, double-sided sideboards control, combi-flap & Palfinger PK12000 A crane (year 2007) with elevated stand. Load chart: 4.5 m - 2510 kg, 6.1 m - 1820 kg, 8.1 m - 1360 kg! Hodpfowp Imqjx Ab Tst ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to change, prior sale, and errors!

Year of construction: 2003, condition: used, fan, blower, fan wheel, cross-flow fan, cross-flow blower, cross-flow ventilator, roller fan -Manufacturer:Emmevi, fan wheel cross-flow fan -Article number: COD. 119636 -Voltage: 230V -Fan wheel: both sides Ø 60 x 180 mm -Number: 14x fan wheel available -Price: per piece -Dimensions: 470/100/H95 mm -Weight: 2 kg/piece Hedpfx Abeunn H Ss Tet

Condition: used, mileage: 424,408 km, power: 278 kW (377.97 HP), first registration: 01/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 03/2024, color: green, gearing type: automatic, emission class: euro6, loading space volume: 44 m³, loading space length: 7,100 mm, loading space width: 2,470 mm, loading space height: 2,510 mm, Equipment: ABS, air conditioning, navigation system, parking heater, tail-lift, * Sun visor Hsdpfxjup I Tho Ab Tot * ABS * TCS Traction Control System * ESP * Active Brake Assist * Lane departure warning * Radio * Navigation system * On-board computer * Auxiliary heating * Cruise control * Hill start assist * Electric windows * Electric adjustable mirrors * Heated mirrors * Fog lights * Sunroof * Driver's comfort seat * Heated seats * Diff. lock rear axle * Top air intake * Air dryer * Trailer hitch * 2-wire air connection * 12-speed * Suspension: leaf-air * Payload: 9080 * Continuous brake: automatic. controlled additional brake (VEB) 3-stage + auto mode ----Special structure: tail lift: Palfinger MBB C2000S, load capacity: 2,000 kg, blade height: 2,550 mm, aluminum, foot control.----Structure: flatbed structure, sliding tarpaulin left + right, aluminum side walls 400mm, sliding roof, hardwood floor, lashing holes, foldable center rail. Only sold to traders. ONLY THE NET PRICE IS PAYABLE FOR EXPORT !!!!! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE FOR EQUIPMENT + ACCESSORIES. Our general terms and conditions form the basis of all purchase contracts, invoices, pro forma invoices, orders and sales talks (see legal notice).

Condition: new, Year of construction: 2023, Due to a planning error, I am selling a new, originally packed cantilever discharge system for a Fröhling heating system Hodpfx Abjuq Iy Re Tjt for 6 m room size with 1 m auger extension with separate drive for screw and turntable as 2 motors, ideal for 2 boilers Photo is from another system as mine is still packed

Condition: used, maximum load weight: 32,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 09/2013, loading space length: 13,600 mm, loading space width: 2,400 mm, loading space height: 3,000 mm, Equipment: ABS, Krone SD MegaLiner Platform Curtain Side Edscha Roof Sliding Curtain Drop Sides Internal Ref. No. for inquiries: 023680 * ABS * Drum brakes * 3 axles, air suspension * BPW axles * Edscha sliding roof * Sliding curtain Hjdpfx Absu Tl Rdo Tst Cargo area dimensions: Length: 13,600 mm Width: 2,400 mm Height: 3,000 mm Tyres: * 1st axle: 445/45 R 19.5, 40%, air suspended * 2nd axle: 445/45 R 19.5, 40%, air suspended * 3rd axle: 445/45 R 19.5, 40%, air suspended ---- Price: €4,900 + 19% VAT. For further questions, you can reach us at the following phone numbers: We speak: German, English, Polish, French and ????? Errors, omissions, and prior sale excepted.

Condition: used, mileage: 1,200 km, power: 18 kW (24.47 HP), first registration: 01/2018, fuel type: diesel, overall weight: 2,000 kg, color: orange, gearing type: mechanical, suspension: other, number of seats: 1, operating hours: 1,200 h, Equipment: air conditioning, cabin, , diesel First registration 02.01.2018 18 kW cubic capacity 1,261 cm³ 1,200 operating hours Front loader Front hydraulics Front PTO Hydrostat Cab air conditioning 1 seat Rear PTO Shovel Front loader permissible total weight 2,000 kg The vehicle had a special purpose registration on 23.11.2017. FOR US THE CONDITION AND THE FEEL OF THE VEHICLE ARE DECISIVE, THE PRICE IS IN SECOND PLACE If you have any further questions, please do not hesitate to contact Mr. Faller at the number. //*EXCHANGE, TRADE-IN OR LOAN OF YOUR VEHICLE, AS WELL AS FINANCING POSSIBLE! All information without guarantee* Further offers can be found on our homepage: The description and data given do not constitute a guarantee and are not binding. The purchase contract concluded at the dealership when the vehicle is purchased is binding. Subject to errors and prior sale! Hedpovicvhjfx Ab Tot

Condition: new, Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm LÖWER-DoubleSander Solid DSM 2004 ----- Double-sided four-belt single wood sander for Sanding solid wood such as window frames etc. Highly stable top design with innovative details. Suitable for high continuous loads even with higher chip removals. - sanding units arranged one after the other for pre-grinding, Fine sanding and finishing sanding, each from above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and shoe 3. Finishing unit with fiber brush - Directly driven grinding rollers for slip-free Power transmission - maintenance and wear-free CERMET-coated grinding wheels shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer sanding belt service life - force-guided pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the Grinding rollers - Airborne dust extraction on the tension rollers - Integrated brushing and finishing device with large Grinding dust extraction - motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball screws bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal at the bottom via precision Threaded spindle with dimension display via scale ring (Resolution 0.1mm) - Sanding belt tension via pneumatic cylinder constant clamping pressure - Sanding belt change with pneumatic belt relaxation Within seconds - Adjustment option for the sanding belt run Band change - electro-pneumatic compressed air monitoring - Anti-running protection via contact roller if it is too thick workpieces - Workpiece transport via calibrated non-slip and non-stick fixed conveyor belts over heavy, cast tables Finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent Workpiece transport - Feed gear motor with stepless speed 4-20 m/min - all motors electrically protected - ergonomically arranged controls - digital thickness display (resolution 0.1mm) with modern Magnetic tape system Technical data: - Sanding belt speed 22 m/s Hsdpfx Absvnv Tqj Tst - Sanding belt length 1800mm - Sanding belt width 200mm - Working width 190mm - Grinding thickness 2-180mm - four brake motors for 5.5 kW drive - Feed motor 1.5 kW - Feed speed 4-20 m/min. - automatic height adjustment 0.37 kW - two brush units with fiber brushes D 120 x 200mm at 0.37 kW - Suction nozzle 2 x 180mm 2 x 120mm - Extraction air speed 20 m/s - Pneumatic connection 6 bar - Working height 870mm - Length (with soft disc 2740mm) 2600mm - Length with control panel (with soft disc 3035mm) 2985mm - Width 880mm - Height 1910mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE version ----- Price of the above machine on request! ----- Special accessories with additional charge: Workpiece blow-off - using nozzles from above and below at the machine outlet arranged, pneumatically controlled 4-belt sanding belt blowout via nozzles directly on the radii of the tension rollers inside the suction arranged, timer controlled on/off 5 seconds each, can be switched on separately Di...

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 10/2015, loading space length: 13,600 mm, loading space width: 240 mm, loading space height: 3,000 mm, Equipment: ABS, Krone SD MegaLiner Flatbed Curtainsider with Edscha roof cover, sliding curtain, drop sides Ref. No. for inquiries: 12241016 * First registration: 23.10.2015 * ABS * 3 axles, air suspension * BPW axles * Edscha sliding roof * Sliding curtain * Front wall fire extinguisher Cargo area dimensions: Length: 13,600 mm Width: 2,400 mm Height: 3,000 mm Tyres: * 1st axle: 445/45 R 19.5, 30% tread, air suspension * 2nd axle: 445/45 R 19.5, 30% tread, air suspension * 3rd axle: 445/45 R 19.5, 30% tread, air suspension ----Price: 5,900,- Euro + 19% VAT For further questions, you can reach us at the following numbers: We speak: German, English, Polish, French and ????? Hodpfevlbixex Ab Tst Subject to errors, misprints, and prior sale.

Condition: new, Steel Frame Automatic Nailing Bridge A fully automatic nailing station for nailing or stapling sheet materials in accordance with the design specifications including the following functions: ​ 1. Nailing or stapling of sheeting 2. Routing of openings or overhangs 3. Application of breather membrane 4. Nailing or stapling of battens ​ Specification Full PC control with 17” touch screen Interactive display of operation being performed Automatic download from drawing software. Heavy duty tables with one fixed side and one moving side 90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished 1300mm minimum panel height Maximum panel height up to 3.5m (optionally extendable) Maximum panel length 6m – optionally up to 13m 400mm wide heavy duty work tables 825mm working height 300mm maximum panel thickness (optionally 5000mm) Motorised table opening with automatic brake locking Bridge mounted with one nailing / stapling tool mounting as standard. (Options for 2 or 3 nailing tool mounts) Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail & Mitek. Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position. Optional electrically driven sheet feeding system, including automatic sheet feeding and height indexing of the support table. Optional router unit with 4kw motor - servo drive controlled Optional Equipment ​ Hodpfx Abedzc Rxs Tot Table with rails mounted for bridge Additional price per meter for table with rails mounted Independent rails to travel 8m over one 6m capacity table (16m of rail in total) Additional price per meter of rail Working table for holding panel 6m (no rails mounted) Additional price per meter for table Motorised chains rather than manual rollers - initial cost Price per meter for motorisation Baton positioning guiding arrangement Additional tool mount Paper roll clamp, holder and software Electric paper cutting Panel thickness of 500mm Saw blade in X, Y, Z & C axes 350mm max panel thickness Saw blade in X, Y, Z & C axis 500mm max panel thickness. Inclination of the sawblade to one fixed angle Router complete with frequency inverter, mounted on the bridge for routing out openings in the panels. Complete with software controls and dust extraction.

Condition: excellent (used), Electric heating: 48 KW Adjustable air circulation Pneumatically controlled fresh air, exhaust air, and smoke damper Cleaning: foam cleaning Smoke feeding: integrated indoor of the chamber, friction generator Smoking material: wood Without the after-burning system Installation dimensions of the machine in cm: Width: 160 Length: 250 Height: 250 Hedpefiwq Rjfx Ab Tst Trolley dimensions in cm: 100*100*200 height Delivery time: 30 working days after advanced payment

Condition: used, Mechatronic drive system, gearbox, spur gear, angle gear, worm gear, Movigear -Manufacturer: SEW-Eurodrive, Gearbox Movigear Type MGFAT2-DSM-DSC-B/IV/WA/PE/A i 55,25 -Speed: 3.6 to 36.2 rpm -Hollow shaft: Ø 30 x 90 mm -Individual components: see photos Hedpfxorqipgo Ab Tet -Number: 3x gearbox available -Price per piece -Dimensions: 230/170/H365mm -Weight: 16 kg/piece

Year of construction: 2009, condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer -Manufacturer: KTS, Heavy-duty transport wagon industrial trailer type DSL with 1-axle turntable steering -Type: DSL -Platform: 2000/1000/H610 mm -Load capacity: max. 5000 kg -Tires: Solid rubber -Overall dimensions: 3560/1000/H610 mm Hjdpfx Aol Tuu Djb Tet -Empty weight: 300 kg