Used Saphir Grindstar 600 for sale (13,928)

Condition: reconditioned (used), Year of construction: 2013, operating hours: 1 h, functionality: fully functional, machine/vehicle number: SR1477, overall weight: 385 kg, volume flow: 650 m³/h, operating pressure: 40 bar, final pressure: -0.93 bar, input voltage: 400 V, input frequency: 50 Hz, input current: 42 A, type of input current: three-phase, type of cooling: water, rotational speed (max.): 1,750 rpm, warranty duration: 3 months, protection type (IP code): IP54, The TRHC 80-600 has a capacity of 650 m3/h. The 180L-4 electric motor is a suitable drive for the pump. The pump was overhauled in 2025. Free shaft end, without motor and coupling. Parts replaced during refurbishment: new shaft seal, new bearings. Wear plates and impeller re-machined. Pump housing and machine components fully surface-treated and coated. Nwsdpfxoy Hf Imj Ai Tjn

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 9,344 h, load capacity: 3,000 kg, lifting height: 3,695 mm, free lift: 150 mm, fuel type: electric, mast type: simplex, construction height: 2,524 mm, fork carriage width: 1,200 mm, fork length: 1,400 mm, empty load weight: 5,419 kg, total length: 2,600 mm, drive type: Elektro, construction width: 1,200 mm, Electric four-wheel forklift Load center: 600 ISO class: integrated Mast type: standard Transmission: AC Technical condition: good Front tire type: superelastic Front tire size: 2 x 23x10-12 Front tire condition: 40 - 60% Rear tire type: superelastic Rear tire size: 2 x 200/50-10 Rear tire condition: 60 - 80% Battery voltage: 80V Battery capacity: 625Ah Nsdoz Ifytspfx Ai Town Battery year of manufacture: 2018 Double auxiliary hydraulics, integrated fork positioner with side shift, front and roof windshield, gel battery, 2x work lights at the front, 1x work light at the rear.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 12,499 h, load capacity: 5,000 kg, lifting height: 4,030 mm, free lift: 1,250 mm, fuel type: electric, mast type: triplex, construction height: 2,250 mm, fork carriage width: 1,300 mm, fork length: 2,400 mm, empty load weight: 7,976 kg, total length: 3,150 mm, drive type: Elektro, construction width: 1,400 mm, Electric 4-wheel forklift Load center: 600 ISO class: FEM 3 A Mast type: Triplex Transmission: AC Technical condition: good Front tire type: Superelastic Front tire size: 2 x 355/50-15 Front tire condition: 60 - 80% Rear tire type: Superelastic Rear tire size: 2 x 21x8-9 Nwjdpfx Aioz If E Aj Ten Rear tire condition: 40 - 60% Battery voltage: 80V Battery capacity: 930Ah Battery year of manufacture: 2018 Double auxiliary hydraulics, fork positioner with side shift, full cabin with heater, double pedal configuration, blue spot, full free lift, battery, charger, 2x front work lights, 1x rear work light.

Condition: new, Dim. C: add 50 mm for lid thickness. Nwods Abd H Sopfx Ai Ten Packaging quantity: 1 Packaging unit: piece

Condition: new, Our timber grapples allow timber to be transported, with varying diameters and lengths depending on the grapple model. The grapples can also be used to lift perforated jumbo panels, etc., as well as reinforced concrete panels. Not recommended for pulling timber. The grapples clamp under the weight of the timber. All components are manufactured with high precision using a laser cutter and made from high-quality steel, and then powder-coated. Each grapple is equipped with a shackle as standard. The parameters of JUMBO 600:     Working width - 600mm     Maximum opening - 620mm     Minimum opening - 100mm Nedpfxo Abpubs Ai Town     Sheet thickness - 12mm     Sheet width - 65mm     Weight - 13kg     Screws M20, class 10.9     Shackle for suspension

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 24 m/min, nominal power (apparent): 16 kVA, controller manufacturer: Heidenhain, total height: 2,950 mm, total length: 2,500 mm, total width: 2,610 mm, overall weight: 7,000 kg, operating hours of spindle: 10,902 h, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Mikron HEM600 Year of manufacture: 2013 Control system: Heidenhain ITNC 620 Spindle hours: 10,902 X-axis: 650 Y-axis: 530 Nwjdpfjz Uxiisx Ai Ton Z-axis: 600 Rapid traverse: X, Y 30 m/min, Z 24 m/min Maximum spindle speed: 9,000 RPM Tool holder: SK40 Tool magazine: 30 positions Chip conveyor Handwheel Coolant nozzle Connected power: 16 kVA Clamping area: 850x560 mm Dimensions: approx. W=2,500 mm / D=2,610 mm / H=2,950 mm Weight: approx. 7,000 kg In very good condition / without clamping devices! Inspection possible at any time while the machine is powered on. Available from approximately the end of November 2026. Upon request and for an additional charge, we can disassemble the machine and load it onto a customer-provided transport vehicle.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 9,018 h, load capacity: 5,000 kg, lifting height: 3,200 mm, free lift: 150 mm, fuel type: diesel, mast type: simplex, construction height: 2,521 mm, fork carriage width: 1,350 mm, fork length: 1,200 mm, drive type: Diesel, Diesel forklift Load center: 600 Nwjdpsz Rrm Tefx Ai Tjn ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Standard Condition: Ready for operation and fully functional Technical condition: good Front tire type: Superelastic Rear tire type: Superelastic 3rd valve, work light (rear), work light (front), heater, soot filter, full cab, interior mirror, plastic seat cushion, dust protection, double pedal

Condition: new, Features - Gasoline-powered compressor for mobile use - V-belt-driven 2-cylinder in-line engine in a single-stage design - Equipped with a robust HONDA 4-stroke engine - With a pressure regulator for precise pressure adjustment - With large, solid rubber wheels for easy transport - Condensate drain via ball valve Dimensions (mm): 1230x710x800 Intake capacity l/min: 411 Engine kW/HP: 3.5/4.8 Sound pressure level LWA/dB: 97/78 Delivery rate l/min: 300 Speed RPM: 1070 Tank size (L): 2x11 Tank pressure bar: 10 Nwsdpfxo Abqnij Ai Tsn

Condition: new, Features - Mobile piston compressor with oil-lubricated design - V-belt driven 2-cylinder in-line unit - Includes pressure regulator for precise pressure adjustment - Start-up relief via Condor MDR 1 pressure switch - Equipped with large, profiled, ball-bearing hard rubber wheels - Condensate drain via ball valve Nwedpfxe Abql Io Ai Tjn Sound pressure level LWA/dB: 97/78 Tank pressure bar: 10 Motor kW/HP: 2.2/3 Dimensions (mm): 535x480x1170 Delivery rate l/min: 230 Speed RPM: 1200 Suction capacity l/min: 360 Volt/Hz: 230/50 Tank size (L): 90

Condition: new, Equipment - Robust, professional-grade unit - Conveyor belt made of PVC - Special design for wood chips, etc.: Lateral, internally mounted skirts prevent the conveyed material from getting under the belt - Transverse supports of the belt, H=60 mm - Belt length 5000 mm - Belt width 600 mm - Chassis with pneumatic tires, Ø360 mm - Electric motor located at the top of the conveyor belt for improved power transmission Nsdps Abr Evjfx Ai Tswn - Adjustable height via hand winch - Minimum conveying height with 5 m belt length: 2.0 m - Maximum conveying height with 5 m belt length: 3.3 m SPECIAL DESIGNS ARE POSSIBLE UPON REQUEST, WITH INDIVIDUALLY ADJUSTABLE BELT LENGTHS AND SPEEDS! Possible gear ratios without additional cost: 1:50 = 10 m/min 1:40 = 13 m/min 1:30 = 17 m/min 1:25 = 21 m/min (Standard) 1:20 = 26 m/min 1:15 = 35 m/min Belt: 5000 x 600 mm Gear ratio: 1:25 = approx. 21 m/min belt speed (standard gear ratio) Min. discharge height: 2000 mm Dimensions (L x W x H): 5000 x 1100 x 700 mm Carrying width: 500 mm Drive: Electric motor 230V / 1.5 kW Max. discharge height: 3300 mm

Condition: new, Features: Nwsdo Abr E Aepfx Ai Ton - Robust, professional-grade equipment - Fall protection net - PVC conveyor belt - Belt length: 5 m - Belt width: 60 cm - Chassis with pneumatic tires, Ø360 mm - Height adjustable via hand winch for flexible positioning - Minimum conveying height with 5 m belt length: 2.27 m - Maximum conveying height with 5 m belt length: 3.45 m SPECIAL DESIGNS ARE POSSIBLE UPON REQUEST, WITH INDIVIDUALLY ADJUSTABLE BELT LENGTHS AND SPEEDS! Possible gear ratios without additional charge: 1:50 = 10 m/min 1:40 = 13 m/min 1:30 = 17 m/min 1:25 = 21 m/min (Standard) 1:20 = 26 m/min 1:15 = 35 m/min Translation: 1:25 = approx. 21 m/min belt speed (standard gear ratio) Belt: 5000 x 600 mm Dimensions (L x W x H): 5000 x 1100 x 700 mm Drive: Electric motor 230 V / 1.5 kW Max. discharge height: 3300 mm Min. discharge height: 2000 mm

Condition: new, Equipment - Robust, professional-grade unit - Fall protection net - PVC conveyor belt - Belt length: 5 m Njdpe Abr Hasfx Ai Tewn - Belt width: 60 cm - Chassis with pneumatic tires, Ø 360 mm - Height adjustable via hand winch - Minimum conveying height with a 5 m belt length: 2.27 m - Maximum conveying height with a 5 m belt length: 3.45 m SPECIAL DESIGNS ARE POSSIBLE UPON REQUEST, WITH INDIVIDUALLY ADJUSTABLE BELT LENGTHS AND SPEEDS! Possible gear ratios without additional charge: 1:50 = 10 m/min 1:40 = 13 m/min 1:30 = 17 m/min 1:25 = 21 m/min (Standard) 1:20 = 26 m/min 1:15 = 35 m/min Translation: 1:25 = approx. 21 m/min belt speed (standard gear ratio) Drive: Electric motor, 400V/1.5kW Max. discharge height: 3300 mm Min. discharge height: 2000 mm Dimensions (L x W x H): 5000 x 1100 x 700 mm Belt: 5000 x 600 mm

Condition: new, Equipment - Robust, professional-grade unit - Conveyor belt made of PVC - Special design for wood chips, etc.: Lateral, internal aprons prevent the conveyed material from getting under the belt - Transverse struts of the belt, H=60 mm Nodpfx Aie Abr Ido Town - Belt length 6000 mm - Belt width 600 mm - Chassis with pneumatic tires, Ø360 mm - Height can be adjusted flexibly using a hand winch - Minimum conveying height with a 5 m belt length: 2.5 m - Maximum conveying height with a 5 m belt length: 3.8 m SPECIAL DESIGNS ARE POSSIBLE UPON REQUEST, WITH INDIVIDUALLY ADJUSTABLE BELT LENGTHS AND SPEEDS! Drive: Tractor hydraulics Max. discharge height: 3800 mm Dimensions (L x W x H): 6000 x 1100 x 700 mm Cleat width: 500 mm Belt: 6000 x 600 mm Min. discharge height: 2400 mm

Condition: new, Equipment - Robust, professional-grade unit - Fall protection net - PVC conveyor belt - Belt length 6 m - Belt width 60 cm - Chassis with pneumatic tires, Ø 360 mm - Height adjustable via hand winch - Minimum conveying height with 6 m belt length: 2.50 m - Maximum conveying height with 6 m belt length: 3.80 m Nedpfx Ao Abr Ikei Tswn CUSTOM DESIGNS ARE AVAILABLE UPON REQUEST, WITH INDIVIDUALLY ADJUSTABLE BELT LENGTHS AND SPEEDS! Belt: 6000 x 600 mm Drive: Tractor hydraulics Dimensions (L x W x H): 6000 x 1100 x 700 mm Min. discharge height: 2400 mm Max. discharge height: 3800 mm

Condition: new, Equipment - Robust, professional-grade unit - Conveyor belt made of PVC plastic - Special version for wood chips, etc.: Side, internal aprons prevent the conveyed material from getting under the belt - Crossbars of the belt, H = 60 mm - Belt length 6000 mm - Belt width 600 mm - Chassis with pneumatic tires, Ø360 mm - Electric motor at the top of the conveyor belt for better power transmission - Adjustable height via hand winch - Minimum conveying height with 6 m belt length: 2.50 m - Maximum conveying height with 6 m belt length: 3.80 m SPECIAL DESIGNS ARE POSSIBLE UPON REQUEST, WITH INDIVIDUALLY ADJUSTABLE BELT LENGTHS AND SPEEDS! Possible gear ratios without extra charge: 1:50 = 10 m/min 1:40 = 13 m/min 1:30 = 17 m/min 1:25 = 21 m/min (Standard) 1:20 = 26 m/min 1:15 = 35 m/min Max. discharge height: 3300 mm Drive: Electric motor 230 V / 1.5 kW Gear ratio: 1:25 = approx. 21 m/min belt speed (standard gear ratio) Min. discharge height: 2400 mm Belt: 6000 x 600 mm Dimensions (L x W x H): 6000 x 1100 x 700 mm Nodpfj Abr Iwjx Ai Tswn Carrier width: 500 mm

Condition: new, Compressor Aerotec 600-90 TECH, 600 l/min, 3 kW, 90 l, AEROTEC · The 63 mm tank pressure and outlet pressure gauges, together with a large, easy-to-grip pressure regulator, are protected and stored within the console. · This allows the user to have all necessary pressure information readily available at a glance. · V-belt driven, 2-cylinder, 1-stage, in-line unit. · Sample tested according to PvI standards. · Start-up relief via pressure switch control. · Condensate drain via ball valve. · Includes phase inverter plug. · Further technical specifications: Width: 390 mm · Length: 975 mm · Weight: 75 kg · Height: 800 mm · Mains voltage: 400 V / 50 Hz Operating pressure: 10 bar Tank volume: 90 l Length: 975 mm Mains voltage: 400 / 50 V / Hz Width: 390 mm Rated power input: 3 kW Height: 800 mm Weight: 75 kg Nwjdpj Ab Hwgsfx Ai Ton Intake capacity: 600 l/min Delivery rate: 375 l/min

Condition: new, Thread cutting lubricant, 600 ml spray can, RIDGID Nwjdpfj Abxzdsx Ai Tsn · Cools threads and pipes during application · Accelerates metal removal · Improves thread quality · Reduces torque during thread cutting · Free of chlorine and other halogens, PCB, and heavy metals Packaging: Spray can Content: 600 ml

Condition: new, Equipment Nwsdpfo Abtbxjx Ai Ton - Robust professional-grade unit - Fall protection net - PVC conveyor belt - Belt length 8 m - Belt width 60 cm - Chassis with pneumatic tires, Ø360 mm - Height adjustable via hand winch - Minimum conveying height with 8 m belt length: 2.86 m - Maximum conveying height with 8 m belt length: 4.34 m CUSTOM DESIGNS ARE POSSIBLE UPON REQUEST, WITH INDIVIDUALLY ADJUSTABLE BELT LENGTHS AND SPEEDS! Possible gear ratios without extra charge: 1:50 = 10 m/min 1:40 = 13 m/min 1:30 = 17 m/min 1:25 = 21 m/min (standard) 1:20 = 26 m/min 1:15 = 35 m/min Translation: 1:25 = approx. 21 m/min belt speed (standard gear ratio) Belt: 8000x600 mm Max. discharge height: 4500 mm Drive: Electric motor 400V/1.5kW Dimensions (LxWxH): 8000x1100x700 mm Min. discharge height: 2700 mm

Condition: new, Features - The dehumidifier has a digital control panel, which allows the desired humidity level to be programmed. - Operating hours and the current humidity are also displayed. - The standard-installed hygostat measures the humidity content of the air and compares it with the set value. - The built-in automatic defrost function enables dehumidification operation down to a temperature of +5°C. - The integrated automatic shut-off function switches off the device when the water collection tank is full. - Thanks to the water hose that can be led to the outside, the dehumidifier can be operated continuously. - This eliminates the need for regular emptying of the water collection tank. - The air filter can be easily removed and cleaned. - The robust handle and transport wheels ensure quick relocation. Nede Abrw Espfx Ai Tjwn Technical data AC motor 230 V ~ 50 Hz Power consumption P1 660 W Operating range relative humidity 30 - 90 % Operating range temperature 5 - 32 °C Air flow rate 680 m³ / h Dehumidification capacity max. (30°C / 80% RH) 60 L / 24 h Room area Amax / Amin 60 - 80 m² / 11 m² Room volume (with a ceiling height of 2.5 m) 150 - 200 m³ Water tank capacity max. (hose connection for continuous water drainage) 5.8 liters Refrigerant R290 (propane)* Protection class IP X0 Rotary piston compressor yes Movable yes Sound pressure level at the workplace LPA 53 dB (A) Sound power level LWA < 70 dB (A)

Condition: new, Scissor-type roller conveyors, 600 mm, number of axles: 50 · Design: with ball-bearing, bright zinc-plated steel rollers · Optionally available with 2-row ball-bearing, blue plastic rollers · Roller diameter: 48 mm · Axle diameter: 8 mm · All steel parts are zinc-plated · Each support leg has 2 lockable swivel casters with solid rubber tires · Conveyor width: 300 mm, 400 mm, 500 mm or 600 mm, whereby the conveyed goods can also be wider and overhang on the sides Nedpfx Aie Abu Sxj Tswn · Roller spacing: continuously adjustable from approximately 32 mm to approximately 130 mm, depending on the extended length · Height adjustment range: standard from approximately 700 mm to 1100 mm · Delivery of intermediate lengths, special widths and special heights is possible. Extendable up to max.: 1.7 - 6.2 m Conveyor width: 600 mm Number of support legs: 4 Number of rollers per axle: 6 Axle diameter: 8 mm Number of axles: 50 Load capacity between 2 supports: 120 kg

Condition: new, Equipment - Robust, professional-grade unit - Fall protection net - Conveyor belt made of PVC plastic - Belt length: 7 m - Belt width: 60 cm - Chassis with pneumatic tires, Ø360 mm - Height adjustable flexibly using a hand winch - Minimum conveying height with 7 m belt length: 2.60 m - Maximum conveying height with 7 m belt length: 4 m Nwedj Abr S Nopfx Ai Ten SPECIAL DESIGNS ARE POSSIBLE UPON REQUEST, WITH INDIVIDUALLY ADJUSTABLE BELT LENGTHS AND SPEEDS! Drive: Tractor hydraulics Belt: 7000x600 mm Max. discharge height: 4300 mm Dimensions (LxWxH): 7000x1100x700 mm Min. discharge height: 2600 mm

Condition: new, Equipment - Robust, professional-grade unit - Fall protection net - PVC conveyor belt - Belt length: 7 m - Belt width: 60 cm - Chassis with pneumatic tires, Ø360mm - Height adjustable via hand winch - Minimum conveying height with 7 m belt length: 2.60 m - Maximum conveying height with 7 m belt length: 4 m SPECIAL DESIGNS ARE POSSIBLE ON REQUEST, WITH INDIVIDUALLY ADJUSTABLE BELT LENGTHS AND SPEEDS! Possible gear ratios without additional cost: 1:50 = 10 m/min 1:40 = 13 m/min 1:30 = 17 m/min Nwedpfxe Abr Ttj Ai Ton 1:25 = 21 m/min (standard) 1:20 = 26 m/min 1:15 = 35 m/min Drive: Electric motor 400V/1.5kW Belt: 7000x600mm Dimensions (LxWxH): 7000x1100x700mm Min. discharge height: 2600mm Max. discharge height: 4300mm Gear ratio: 1:25 = approx. 21 m/min belt speed (standard gear ratio)

Condition: new, Pipe wrench, overall length 600 mm, clamping width 80 mm, for pipes up to 3 inches, aluminum, RIDGID · Straight · Made of aluminum · Double T-handle with adjustable hook jaw · Adjustment nut without clamping effect · Replaceable, heat-treated jaws · 40% weight reduction · Further technical specifications: Material: Aluminum Nodpo Abzrfsfx Ai Town Nominal size mm: 76.20 mm Nominal size: 3"? Overall length: 600 mm Material: Aluminum Clamping width: 89 mm

Condition: new, Pipe wrench, overall length 600mm, clamping width 80mm, for 3-inch pipes, cast iron, RIDGID · Straight · Cast iron Nsdo Abztcspfx Ai Tswn · Double T-handle with adjustable hook jaw · Jam-free adjustment nut · Replaceable, heat-treated jaws · Further technical specifications: Type: 24 · Material: Cast iron Clamping width: 89 mm Nominal size: 3 ? Material: Robust cast iron construction Nominal size mm: 76.20 mm Overall length: 600 mm

Condition: new, Equipment - Robust, professional-grade unit - Conveyor belt made of PVC plastic - Special design for wood chips, etc.: Lateral, internal aprons prevent the conveyed material from getting under the belt - Crossbars of the belt, H = 60 mm - Belt length 6000 mm - Belt width 600 mm - Chassis with pneumatic tires, Ø 360 mm - Electric motor positioned at the top of the conveyor belt for better power transmission - Height adjustable via hand winch for flexible positioning - Minimum conveying height with a 6 m belt length: 2.5 m - Maximum conveying height with a 6 m belt length: 3.8 m SPECIAL DESIGNS ARE POSSIBLE UPON REQUEST, WITH INDIVIDUALLY ADJUSTABLE BELT LENGTHS AND SPEEDS! Possible gear ratios (no extra charge): 1:50 = 10 m/min 1:40 = 13 m/min 1:30 = 17 m/min 1:25 = 21 m/min (Standard) 1:20 = 26 m/min 1:15 = 35 m/min Max. discharge height: 3800 mm Min. discharge height: 2400 mm Belt: 6000 x 600 mm Dimensions (L x W x H): 6000 x 1100 x 700 mm Nedpfx Ae Abr I Rei Town Gear ratio: 1:25 = approx. 21 m/min belt speed (standard gear ratio) Drive: E-motor 400V/1.5kW