Used Sapi Gmbh Pulverbeschichtungsanlage Komplettsystem Für Industrielle for sale (70,279)

Condition: excellent (used), Year of construction: 2015, operating hours: 20,331 h, functionality: fully functional, pressing force: 100 t, filling opening width: 970 mm, filling opening length: 1,800 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 750 kg, overall weight: 33,000 kg, Good day, We hereby offer you, without obligation, a used, complete baling press line consisting of a baler manufactured by HSM, type VK 8818 R-FU, including conveyor technology and wire tying stations. The following technical data was taken from the manufacturer's operating manual and brochures, for which we cannot guarantee accuracy or completeness. Technical Data – Baler: Manufacturer: HSM GmbH + Co. KG, Germany Type: VK 8818 R-FU Year of manufacture: 2015 Operating hours: 20,331 hours (as of September 2025) Number of bales pressed: 29,020 bales (as of September 2025) Press force (main press): 1000 kN Specific pressing force: 120 N/cm² Shear edge ejector force: 121 kN Feed opening dimensions: 970 x 1,800 mm Theoretical cycle time (idle): 8.3 seconds Theoretical output capacity: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length adjustable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency-controlled Connected load: 110 kW Total current consumption: 213 A Fusing: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Output at bulk density: 20 kg/m³: 12.86 t/hour 50 kg/m³: 32.15 t/hour Bale weights (approx. 1.2 m bale length): 650 up to 750 kg per bale, material-dependent Hydraulic oil tank volume: 2000 L HVI 46 PLC control system: Siemens S7-300 Control panel: Siemens TP 700 Baler dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Space requirement (with conveyor): 35,000 x 8,480 x 7,745 mm (L x W x H) Baler weight: approx. 33 t (main press approx. 12 t, press channel with bale clamp approx. 10 t) Additional Optional Equipment Ordered: – Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to the standard 2 x 45 kW drive, with same performance – Manual activation/deactivation of the number of wire bindings to save tying wire on non-expansive material – Shear edge ejector with 121 kN pressing force – Sensor-based wire monitoring, with baler shut-off in case of wire breakage or wire end – Bale chute – Optical warning signal, mounted on the control cabinet Condition of the Baler: The complete baling system (baler and conveyor technology) is in good, ready-to-use condition. The unit has been cleaned weekly, lubricated, and maintained according to manufacturer specifications by the operator. Technical Data – Chain Belt Conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain Belt Conveyor KF 1800 Year of manufacture: 2015 Belt speed: 0.36 m/second Feeder belt length: 7,000 mm Inclined belt length: 14,500 mm Gooseneck length: 1,550 mm Incline: 30° Nominal width: 1,800 mm Usable width: 1,638 mm Overall conveyor height: 7,745 mm Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of Delivery: – HSM VK 8818 R-FU baler – Maintenance platform Hnodpfx Aoyz Af Esgyek – Bale chute – Wire diverting stations – Wire spool trolleys (without wire spools) – Stadler KF 1800 chain belt conveyor – Transverse sliding belt conveyor – Pit cover from feed conveyor to pit – Second control cabinet to operate the baler from the conveyor – Machine documentation in English Delivery Time: The complete system has already been dismantled, placed into storage, and can be loaded at short notice following receipt of payment. We would be pleased if this or one of our other balers might be of interest to you. Your Service Team Mertens & Frowein GmbH

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Machine designation: Bandsaw Manufacturer: MEBA Model: 407A-OV Year of manufacture: 2005 Condition: very good (used) Functionality: fully functional Technical details Power: 5.5 kW (7.48 HP) Input voltage: 230 V Maximum cutting width: 407 mm Overall height: 2,000 mm Overall length: 1,400 mm Overall width: 2,500 mm Unladen weight: 3,500 kg Cutting range for round steel at 90°: 407 mm Cutting speed: 300 mm/min Saw band length: 5,120 mm Saw blade length: 5,120 mm Description MEBA 407A-OV CNC Horizontal Bandsaw Material feed conveyors Year of manufacture: 2005 Siemens control system Chip conveyor 5.5 kW 3.5 t L 1.4 x W 2.5 x H 2 m Saw band length: 5,120 mm Cutting speed: 15 - 150 m/min Clamping height: 10 - 407 mm Clamping width: 10 - 407 mm Cutting area: 407 x 407 mm Cutting range (round): 407 mm Infinitely adjustable lowering speed: 0 - 300 mm/min MEBA Maschinenbau GmbH Standard commission System designation: ECO 407A-OV Year of manufacture: 12/2005 Type: ECO 407A-OV MEBA Operating instructions MEBAMAT 407 A-OV Chapter 1 - Technical Data Machine type: MEBAMAT 407 AOV Machine number: 7099 Cutting range: 90° Round: 407 mm Flat: 407 x 407 mm Bundle clamping range: 10 - 407 mm Width: 10 - 407 mm Height: 0 - 600 mm Material feed: 0 - 9999 mm Hnjdpfx Ajyxyv Asgysk Single: Multiple: Remnant length: Manual: approx. 25 mm Automatic: approx. 70 mm Cutting speed: 15 to 150 m/min - AC drive Cutting pressure: stepless hydraulic Lowering speed: 0 to 300 mm/min - stepless Saw band dimensions: 5120 x 41 x 1.3 mm Operating instructions MEBAMAT 407 A-OV Saw band tension: hydraulic Approx. 3050 kg (net) Machine dimensions (L x W x H): Approx. 1500 x 2600 x 2100 mm Max. support weight: Material weight max. 600 kg/m Working height: 750 mm With installation elements approx. 800 mm (option)

Year of construction: 2026, condition: new, functionality: fully functional, The drum-type belt blast machine is specially designed for cleaning and derusting bulk materials. It operates reliably and is easy to use. Thanks to its robust construction and high-performance turbine, the system is ideal for daily use in production environments. Technical specifications: Capacity: 180 liters Turbine: 1 pc. Turbine 3.6.10 Turbine power: 11.0 kW Turbine control: frequency controlled Workpiece data: - Max. space diagonal: 270 mm - Max. workpiece weight: 25 kg Belt: perforation Ø 8 mm Abrasive: - Suitable for round abrasive media - Automatic refill silo: 100 liters - Integrated abrasive flow regulation Extraction & noise: - Sound pressure level without sound insulation ≤ 85 dB(A) - Filter unit can be positioned left or right Year of manufacture: approx. week 31/2026 Features: - Wear-resistant manganese lining in direct and indirect blasting zones - Turbine housing lined with tool steel - Turbine blades made of high-strength tool steel - Turbine feed channel also made of tool steel Hsdpfx Ageyxpvlsyjnk - Abrasive collection chute beneath the machine for optimized media return Options: - Customized paint finish - Flexible filter positioning (left/right) - Loading solutions available upon request

Condition: excellent (used), Year of construction: 2021, operating hours: 9,500 h, functionality: fully functional, machine/vehicle number: 3284, Standard version of RUF Lignum R2 with outfeed channels, el.motor 22 kW, briquette sizes 150x60 mm Hnjdpfjyyl Srox Agyjk capacity up 500 kg/h

Condition: like new (used), Year of construction: 2015, operating hours: 27,000 h, functionality: fully functional, Used Combined Heat and Power Unit (CHP) Manufacturer: 2G Energietechnik GmbH Model: G4076 Engine: MAN Gas Engine Electrical Power: approx. 400 kW Voltage: 400 VAC / 24 VDC Hodjyxl Uqopfx Agyonk Frequency: 50 Hz Year: 2015 / 2017 Condition: Used, in working condition - Complete CHP unit - Control cabinet - Control system / HMI - Gas engine and generator - Delivery as inspected Price: EURO 125,000.-/EXW (Loaded) Location: Germany/Düsseldorf Delivery: EXW (Ex Works)

Year of construction: 2015, operating hours: 780 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: sn:CAI858663, ALUP Sonetto 15 500 Screw Compressor for Sale – Reliable Industrial Unit – TOTAL OPERATING HOURS: 780!!! For sale: ALUP Sonetto 15 500 screw compressor in good working condition, suitable for continuous industrial use. Key technical specifications: Power: 15 kW Air receiver: 500 liters Working pressure: 8–10 bar Air delivery: approx. 1.8–2.4 m³/min Type: tank-mounted screw compressor Cooling: air-cooled Hsdeyzhmbopfx Agyenk Control: integrated electronic controller Condition: Operating hours: 780 Regularly maintained / serviced Oil and filters: replaced at last service Currently operational / available for testing This compressor delivers reliable and stable performance, ideal for workshops, industrial applications, and automotive service environments. Additional information: Location: Gyor / Hungary Transport/shipping can be arranged if needed Price: 7,700 EUR (negotiable) For further information, feel free to contact by phone or message.

Year of construction: 2016, condition: used, functionality: fully functional, If you have any questions, you can contact me at any time by email. The facility is located in Laupheim. Hnjdpfx Agoya H Uyoyjk

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 23352279, type of input current: three-phase, input voltage: 400 V, total width: 600 mm, total length: 1,600 mm, total height: 2,150 mm, overall weight: 460 kg, power: 5.5 kW (7.48 HP), compressed air connection: 6 bar, Equipment: documentation/manual, type plate available, SICK MCS 100FT/F CEMS System (2023) - Unused / Zero Hours - QAL1 Certified Hsdpfxjy A Nu Ao Agyjnk Available for immediate sale: A complete, unused (zero hours) Continuous Emission Monitoring System (CEMS) SICK MCS 100FT/F, manufactured in October 2023. This is a turn-key solution featuring advanced multi-component analysis technology. Key Technical Specifications: - FTIR Technology: Simultaneous measurement of SO2, NO, NO2, CO, CO2, HCl, HF, and H2O - FID (TOC) Analyzer: Integrated total organic carbon measurement - Zirconia Sensor: Integrated O2 measurement - Certification: Fully QAL1 certified (EN 15267 compliant) - Acid Mist Protection: Includes special cabinet with Acid Mist Absorber Box (ideal for H2SO4 protection during petcoke combustion) Complete Package Includes: - SICK MCS 100FT/F Analyzer Cabinet - Sampling Probe - 20m Heated Sampling Line - MEAC/DAU Data Acquisition System Condition: Brand New / Unused Availability: Immediate (Ex-stock) Ideal for cement and lime plants, refineries, and power generation facilities looking for a high-end upgrade without the manufacturer's lead time. FAT reports and technical manuals are available upon request.

Condition: used, Dough three roll shiter Hnodey Akd Eepfx Agyek

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Hsdjqt Dmyspfx Agysnk Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Year of construction: 2014, condition: good (used), Technical data capacitor Volume flow max.: 300m³/h Condenser mass max. in delivery condition: approx. 430mm x1610 mm high Cylindrical part: approx. Ø 273 mm Weight of the chamber in delivery condition: approx. 80 Kg Content upper part (condenser): approx. 30L Content lower part (receiver): approx. 28 L Material elastomers: NBR/FKM/PTFE Temperature condenser max: 1 to 80°C Condenser vacuum max: 0 to 1000 mbar (absolute) (Condenser not suitable for overpressure!!) Temperature exchanger max: 1 to 80°C Hsdpfxscpwhbj Agyonk Medium exchanger: water Water pressure exchanger max: 10bar Exchanger material: CU-tinned Material condenser: stainless steel Technical questions or other sizes on request.

Year of construction: 2020, condition: used, functionality: fully functional, The dryer is primarily used for drying sewage sludge or substrate from biogas plants. The material fed into the dryer is swirled in the drying chamber by throw shafts. Exhaust gases from a combustion engine flow around the material, causing the water to evaporate. Daily throughput is approx. 10 t. The dryer is sold complete with all ancillary components such as screw conveyors, control cabinet, auxiliary burner, acid pump, exhaust air dampers, etc. For more details, please contact us directly. Dismantling and delivery possible. The manufacturer can assist with recommissioning. Hnedsyx Iztspfx Agyok

Condition: new, Year of construction: 2025, Features: - Overband Neodymium Magnetic Separator - HP Hsdew Elbdopfx Agyenk - Dust suppression - Conveyor belt speed control - Self-propelled chassis for semi-trailer

Condition: new, functionality: fully functional, power: 56 kW (76.14 HP), Housing: Standard Structure: Stationary frame, including hooklift function for on-site mobility Color: RAL 5003 | RAL 7047 | RAL 7016 Drive: 100% electric Power: 56 kW Hydraulics: electronic mobile control Feed hopper: Standard Discharge conveyor - final grain: belt width 650 mm Discharge conveyor - oversize grain: belt width 800 mm Voltage: 400V ±5% / 50Hz Hedpfx Aswylvdjgyonk Mains type: TN-C/(S) Operation: 6.5" panel, incl. CANBUS Remote control: 4-button Central lubrication: automatic Toolbox: 1x included Fire extinguisher: 1x included

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 44,000 kg, rotor length: 2,800 mm, power: 315 kW (428.28 HP), rotational speed (max.): 87 rpm, - MERAK 2800-2 with 315 kW - Cutting system 116PR - PG190 screen (can be changed on customer request) - Feed chute - Dust suppression Hsdpfxjugf Dws Agyjnk - Electrical central lubrication - Hydraulic safety guard - Overband magnetic separator Neodymium - HP - Rubberized bolted floor plates on tracked chassis

Condition: new, functionality: fully functional, power: 140 kW (190.35 HP), Housing: Standard Chassis: Crawler undercarriage, max. 1.0 km/h Colour: RAL 5003 | RAL 7047 | RAL 7016 Drive: Perkins 1204J Power: 140 kW Emission standard: EU Stage V Hydraulics: electronic travel control Feed hopper: standard Discharge conveyor – finished product: belt width 800 mm Discharge conveyor – oversize: belt width 800 mm Cooling: 3-circuit, incl. CleanFix reversible fan Operation: 6.5" panel, incl. CANBUS Remote control: 4-button & joystick radio remote control Hjdpowylyijfx Agyonk Central lubrication: mechanical Toolbox: 1x included Fire extinguisher: 1x included

Condition: like new (used), operating hours: 185 h, functionality: fully functional, warranty duration: 12 months, power: 140 kW (190.35 HP), Features: - Dust suppression - Raised filling area - Flat bottom plate on tracked chassis Hjdpfx Ajtwmnnsgyjnk Application: Classification of pre-crushed waste wood (see German waste wood classes: A1-A4), mainly as a mixed fraction, with foreign matter - ideal for thermal recycling, with full flexibility in use. Density: 200 - 300 kg/m³, moisture: < 30 %, length: max. 500 mm

Condition: refurbished (used), Year of construction: 2023, operating hours: 800 h, functionality: fully functional, Features: Hnsdpfxsw Elm Tj Agyek - Cutting unit - Side wall extension in cutting area +300mm (one-piece) - Flat base plate on crawler chassis - Dust suppression - Engine compartment fire extinguishing unit

Year of construction: 2025, condition: new, functionality: fully functional, We are offering this new LOWA GmbH Filling and Capping Systems capping machine, model WK12-17, bottle filling and capping machine, year of manufacture 2025. Hjdpjyybh Aofx Agyjnk Manufacturer: LOWA GmbH Filling and Capping Systems Model: Capping Machine WK12-17 Machine type: Bottle Filling and Capping Machine Year of manufacture: 2025 Condition: new Category ID: 679 If you have any questions or need more information, feel free to send us a message or call us.

Condition: excellent (used), Used stainless steel tank Article number: 10896 Previous application: CIP (Cleaning-In-Place) Volume: 3300 L Type: Vertical, standing on 3 legs Material (in contact with product): Stainless steel V2A / AISI 304 Bottom: Klöpper head Hodpfx Agoyw Rn Hsyenk Max. operating pressure: Atmospheric Tank dimensions: Internal diameter: 1190 mm External diameter: 1200 mm Overall height: 3450 mm Cylindrical height: 3000 mm Overall width: 1250 mm Materials: Interior: 1.4301 / AISI 304 Exterior parts: 1.4301 / AISI 304 Features: Nameplate: no Leg height: 420 mm Outlet diameter: 37 mm / 37 mm Clearance outlet to floor: 160 mm / 500 mm

Condition: used, functionality: fully functional, A used Holdefleiss bottle filling and capping machine, type 12/3. The machine has been set up for 0.5l Euro and 0.33l long-neck bottles, including HDE. The machine is supplied without a pre-evacuation system and features long-tube filling valves. The filling valves will be newly resealed. Both a leakage test and a pressure test will be performed. Hnedpfxjyycude Agysk

Year of construction: 2024, condition: ready for operation (used), The heat exchangers are part of the system but were commissioned separately. The new price of the system was therefore over EUR 2 million. The official commissioning took place in April 2024; however, this only involved trial runs and not series production. Technical Data – Modular Chamber Furnace System for Homogenizing Aluminum Billets (Used Equipment) Machine type: Modular chamber furnace system with heat recovery Application: Homogenization (heat treatment) of aluminum billets in batches Design: Electrically heated chamber furnaces with jet heating and air circulation, heat exchanger furnaces, charging machine, racks Hnsdpeyt Ihbofx Agysk System Construction The system essentially consists of: • 1 preheating furnace (BSN 1607) – electrically heated, jet heating • 2 holding furnaces (BSN 1608, 1609) – electrically heated, air circulation • 2 heat exchanger furnaces (BSN 1610, 1611) – unheated, with air circulation • 1 charging machine (BSN 1612) – electric/hydraulic • 12 charging racks (BSN 1614) • Control system with PLC (Siemens S7 1515F 2PN, Profinet) and operator panel • Contact thermocouples for direct billet temperature measurement The system is designed as a complete machine in accordance with Machinery Directive 2006/42/EC (CE compliant). Further information can be found in the attached PDF.

Condition: new, -􀂾automatic screw feed -􀂾automatic switchoff for hopper movement via trail regulation Hnjdey Aiaxepfx Agyek - automatic depth disconnection - pneumatic drive and control - pneumatic screw ejection and emergency stop - foot control - protection-frame (safety device)

Condition: used, Year of construction: 2018, Overview These fermenters (iso tank) were manufactured in 2018 by Germany BrauKon GmbH. The equipment consists of 3 fermenters, designed for beer fermentation. The tanks are still installed and connected to energy and are available immediately. The equipment can be visited in production on request. Technical data  Capacity: 10 hl each Application: Beer fermentation Configuration: 3 × iso fermenters   Hsdpfx Aeywn Svegyjnk

Condition: new, New spacer rings for PAUL KME 2 and BM, with bore diameter 75 mm, outer diameter 120 mm, in widths 41, 30, 26, 22, 20 and 10 mm, new spacer rings for PAUL K2V, with bore diameter 60 mm, outer diameter 90 mm, in widths 40, 30, 20, 10, 2 and 1 mm, Saw bushings for saw shafts with diameters of 60 mm, 50 mm, 45 mm and 40 mm, new hard-chromed CV saw blades in various diameters for KME 2, BM and K2V Hedpfx Ash Anyfogyonk