Used Scheibe Extraction for sale (4,605)

Condition: good (used), Filtration system extraction unit filter unit dust filter filter cabinet Infastaub Filter surface area 22.5 m² 900–1080 m³/h Includes new holders and filter bags All stainless steel Diameter 800 mm Height 860 mm Equipped with compressed air-cleaned filter Equipped with control cabinet Ijdpfxewyf Tpe An Iobc See our other advertisements

Condition: used, Extraction unit previously connected to a Kolbus three knife trimmer. Ibedpfxox Ah N No An Isc

Year of construction: 2007, condition: used, Extraction system for chips, granules, and dust. Ibjdpsza Ha Asfx An Ioc

Year of construction: 2005, condition: used, Extraction system for removing dust from the ambient air. The motor drives a fan impeller, creating negative pressure. The air is sucked into the machine via the intake manifold and reaches the filter elements. The treated air is then blown out again. Additional title: Workshop dust extraction Nominal flow rate: 1400 m³/h minimum flow rate: 1,108 m³/h Ibodpfx Anezgczho Ijc Power: 2.2 kW Current: 5 A Voltage: 400 V Frequency: 50 Hz Base construction: on a mobile frame Features: 140 mm intake manifold; air filter (category C el. lt.); asynchronous motor (manufacturer EMGR)

Condition: used, maximum load weight: 28,796 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2018, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,800 mm, loading space volume: 95 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, SCS 24/L-13.62 EB, LASI EN 12642 Code XL, disc brake, cut-resistant tarpaulin Body – interior/exterior: * Sliding tarpaulin, left and right * Sliding roof * Load securing certificate EN 12642 Code XL * Interior height: approx. 2,800 mm * Perforated outer frame (Multilock) * 15 pairs of lashing points * Swedish stanchions * Stanchion depot with stanchions * Screen-printed floor for 7,100 kg forklift axle load * 20 aluminum insertion slats * 3 pairs of sliding stanchions, adjustable * Rear portal doors with double locks * Reversing lights * Rear fog light * Front wall and rear doors anodized Chassis / other equipment: * SCB Rotos axles * Disc brake 430 mm * Suitable for rail transport * Ferry lashings * Chassis galvanized * Toolbox * Spare wheel holder * Air suspension * Lifting and lowering * ABS, EBS * Tires 385/55 R 22.5, offset 120 * Tread approx. 40% ---- Non-binding offer, ex works Bocholt. Subject to prior sale and errors. Sale only to commercial customers or for export. Ibsdpfx Anjzgzm Ae Isc

Condition: used, maximum load weight: 30,620 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 11/2017, next inspection (TÜV): 10/2026, loading space length: 7,400 mm, loading space width: 2,300 mm, loading space height: 1,500 mm, loading space volume: 24 m³, total width: 2,550 mm, total height: 3,200 mm, Equipment: ABS, 3-axle Langendorf SKA 24/31 aluminum box body VIN: WF67519 Chassis / Components: * Air suspension / Raise and lower function * Load level switch / Lowering during tipping * Wabco Smart Board * 3 x BPW Eco Plus axles with disc brakes * Tires: 385/65 R.22,5 * Remaining tire tread: Front ~50%, Middle ~30%, Rear ~50% * Alcoa Alcoa Dura Bright aluminum rims * Foldable underrun protection * Steel chassis Body: * Steel chassis * Aluminum box body * Front cylinder Hyva, high-pressure max. 230 bar * Volume: approx. 24 m³ * Standing platform * Rear gate with 2 hook locks * All-round rubber seal Ibjdpfx Anezrit Io Isc * Mud-tight * Grain slide * Body heating * Load pressure gauge Weights: * Gross vehicle weight 36,000 kg * Payload 30,620 kg * Tare weight 5,380 kg Other: * German registration * 1 previous owner * MOT valid until 10/2026 -- Inspection valid until 04/2027 New main inspections / safety inspections or weight reductions / increases are possible upon request. We will gladly assist you in obtaining export / transit plates, and we can also arrange for the transport of your purchased vehicles within Germany. Contact us! We speak the following languages: German, English and Russian! No liability for printing and typographical errors, changes, prior sale and errors. Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. On 11,000 m², you will find a wide variety of vehicles. Our company philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. Convince yourself! Our services for you: Loading of vehicles We will gladly help you with loading your purchased vehicles. Organizing special transports We will gladly help you with organizing special transports. Day registration / export plates We will gladly help you obtain export / short-term plates. Handling customs formalities We will gladly help you with customs matters.

Condition: used, Year of construction: 2011, Mobile dust extraction system, Schuko connection, diameter 160 mm Dimensions L/W/H in mm: 2045x870x2125 Power: 2.2 kW Iodpfxjzmag Is An Iobc

Condition: good (used), Storage location: 3129 Manufacturer: Pulsnitz Year of manufacture: 1979 Machine number: 1308 Ijdpozmaw Hofx An Iebc Type / Model: Sto 5 / 125-1 Capacity: 400 m³/h Maximum negative pressure: 1,250 Pa Density: 1.2 kg/m³ Maximum operating temperature: 50 °C Impeller diameter: 480 mm Suction port diameter: 380 mm Connection: 0.37 kW 220/380 V Condition: good Weight: 35 kg Dimensions: 480 x 600 x 1,100 mm

Condition: reconditioned (used), Year of construction: 1994, machine/vehicle number: 941108, functionality: fully functional, total height: 2,520 mm, total length: 2,580 mm, total width: 1,000 mm, Compact dust extraction system with 3 chip collection bags – WITHOUT fan Nominal air flow rate: 5000 m³/h with existing fan – up to 7500 m³/h possible Filter area: 37.5 m² Filtration technology: AL-KO Opti-Jet system consisting of compressed air cleaning (sequence-controlled) and surface filtration Chip collection capacity: 8 solenoid valves Suction nozzle: DN 355 mm Isdpfxjzqan Ho An Iobc Compressed air connection: 1", compressed air, water and oil-free Minimum compressed air consumption 8.5 bar: 1140 NL/cleaning cycle Operating pressure: maximum 8.5 bar Fire extinguisher connection: 1 x 1 1/2" Dimensions WxD approx: 2572 x 981 mm Height approx: 2520 mm Weight without filter approx: 457 kg JET cleaning: A pressure surge on the inside of the filter achieves effective cleaning of the filter hoses on the outside. Easy maintenance: large access doors facilitate filter maintenance, additional inspection covers High-quality filter material: oil and water-repellent surface coating of the filter, for problematic dusts (paint sanding dust, wet dust), filter washable Uniform bag filling: infinitely adjustable distribution flaps enable uniform bag filling Suitable fan: see item no. 7458 D=250 mm - 5000 m³/h extraction capacity With a fan D=350 mm, up to 7500 m³/h extraction capacity is possible!!!

Condition: used, Year of construction: 2017, power: 11 kW (14.96 HP), input voltage: 400 V, volume flow: 6,927 m³/h, overall weight: 1,080 kg, Equipment: CE marking, We are offering this used Höcker Polytechnik Vacumobil 350 mobile dust extraction system, model Vacumobil JT350-L, manufactured in 2017. Ibjdsznulzjpfx An Ijc If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: radial fan -Motor: Dietz 3.0 kW 1420 rpm -Fan wheel: Ø 590 x 160 mm -Volume flow: m³/h -Dimensions: 790/710/H790 mm -Weight: 104 kg Ibodev E D E Njpfx An Ijc

Condition: used, Axial high-performance fan, Axial fan AEG Wall-mounted fan for extraction or ventilation Type AG 80 NY6 No. 4268465 Airflow approx. 11,000 m³/h 6-blade fan Ø 600 mm Internal mounting frame Ø 645 mm External mounting frame Ø 900 mm Installation depth 190 mm Motor power 0.55 kW Power supply 400 Volt, 50 Hz - 6-bladed profiled impeller with bionic blade geometry - Fan blades made of aluminium Ibsdpfsxciw Ijx An Ijc - Fan housing made of metal with wall mounting ring (galvanized sheet metal) - Metal stand with protective guard, custom-built - Mobile Dimensions L x W / H: 1200 x 870 x 1520 mm Weight approx. 90 kg The high-performance fan is in very good condition.

Year of construction: 2025, condition: new, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 1.4.B62.00 5000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve for dust disposal using big bags. Ibjdpfx Ajw Ivr Djn Iec Solenoid valve control with differential pressure display for optimum adjustment of the filter cartridges - cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: excellent (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Cartridge dust extraction system -Filter holder: Gauze holder for extraction, mobile Isdpfx Ansyznk Ho Ijbc -Carrier frame: made of stainless steel -Extraction area: Internal dimensions 1900/440/H1060 mm -Dimensions: 2130/530/H1830 mm -Weight: 74 kg

Condition: used, functionality: limited functionality, input voltage: 400 V, input frequency: 50 Hz, intake manifold diameter: 300 mm, actuation type: electric, Used stationary extraction system installed in a good, tightly sealed cabinet with external electrical control box. Automatic electric filter shaking. Dismantled, immediately available from Barneveld. 300mm connection. Ibodoy Ihwtjpfx An Iec

Condition: used, Ex-protected filter unit, extraction system, central extraction cartridge - impulse filter P. RIES GmbH Type 330 D ATEX Cartridge filter system, rectangular filter unit, central welding fume extraction Machine no. 10011932 Year of manufacture: 2020 - as new, unused Airflow rate: 3,300 m³/h Airflow rate: 0.9 m³/sec Filter area: 20 m² (1 piece cartridge filter) Differential pressure: 3,300 Pa (33 mbar) Extraction connection at filter inlet: 2x Ø 150 mm Exhaust connection at filter outlet: sound insulation hood Compressed air connection: approx. 8 bar Ijdpfx Ajy N Duqon Iobc Motor power: 3 kW Mains connection: 400 Volt, 50 Hz - Explosion-protected design ATEX II 2Db 125°C / 3G T4 - Pneumatic rotating filter cleaning, manual via push button - Manometer for differential pressure display (vacuum display in mbar) - Service door for filter replacement - Filter stage 1 = 1 cartridge filter Ø 325 mm, length 900 mm P-RIES, type cartridge filter 20.1 m², BGIA/IFA class M, antistatic - Filter stage 2 = filter outlet (sound insulation hood) equipped with 9 activated carbon filter cartridges, type AKZ 2500V, 266 m³/h per filter cartridge - Built-in radial fan, type IE 3-premium efficiency, 12% improved efficiency - Robust steel construction in RAL 7035 light grey, antistatic powder-coated - Dirt collection container as pull-out drawer approx. 70 litres (440 x 530 x 300 mm) - EC Declaration of Conformity, operating instructions with wiring diagram available Required space (L x W x H): 670 x 700 x 2430 mm Weight extraction unit: 211 kg Transport dimensions on pallet (L x W x H): 930 x 1350 x 1950 mm Weight incl. transport pallet: 236 kg As new, unused, ex stock

Condition: new, functionality: fully functional, total height: 938 mm, total length: 2,000 mm, total width: 1,100 mm, overall weight: 100 kg, Equipment: CE marking, documentation/manual, type plate available, ISI-FLOW DESK Standard – 1000S – 1700 m³/h Extraction table, suitable for gluing, sanding, polishing, welding, or manual cutting. The ISI Flow Desk 1000 S extraction table is a simple standard workbench for extracting non-explosive, dry dust and gases. TECHNICAL DESCRIPTION: Possible extraction capacity: 1700 m³/h Work surface W/D in mm: W 980 / D 960 Work height in mm: H 638-938 mm Table load: 150 kg/m (wood, with evenly distributed load) Work surface: Wooden slats (optional steel, stainless steel, or plastic slats) Overall dimensions W/D/H in mm: W 1076 / D 1000 / H 938 (other lengths and depths available as options) Fan capacity: without fan Ijdpfxezdtquj An Isbc Pipe connection: D=161 mm Color: RAL 7042/RAL 7011 Weight: 100 kg Application: The workbench is used for extracting non-explosive, dry dust and gases. It can be used as a gluing, sanding, polishing, welding, or manual cutting table. Your advantages of the ISI – Flow Desk series: - 8 device variants available - Simple connection to extraction system via nozzle at the end of the table - The design of the table allows working from 3 sides - Height adjustment - Wide range of assembly and connection accessories - Quality Made in Europe The ISI Air extraction table must not be used in conjunction with ATEX zones.

Condition: new, functionality: fully functional, total height: 938 mm, total length: 2,000 mm, total width: 1,100 mm, overall weight: 100 kg, Equipment: CE marking, documentation/manual, type plate available, ISI-Flow Desk – 2000E – 2880 m³/h – 230 V Ibedozdtwzspfx An Isc Extraction table, welding and grinding table with electric height adjustment The ISI Flow Desk 2000 E extraction table is a height-adjustable workbench for extracting non-explosive, dry dust and gases. TECHNICAL DESCRIPTION: Possible extraction capacity: 2880 m³/h Work surface W/D in mm: W 1990 / D 824 Work height in mm: H 638-938 mm Table load: 200 kg/m (wood, with evenly distributed load) Work surface: Wood slats (optional steel, stainless steel, or plastic slats) Overall dimensions W/D/H in mm: W 2000 / D 1100 / H 938 (optional L = 1000/1500 mm available) Fan power: without fan Operating voltage: 1 x 230 V, 50 Hz Pipe connection: D = 251 mm Color: RAL 7042 / RAL 7011 Weight: 191 kg Application: The workbench is used for extracting non-explosive, dry dust and gases. The table is designed for both standing and seated work with full knee clearance, focusing on ergonomics. For even more efficient work, the extraction table offers a wide range of optional accessories: - Back wall, side walls, and ceiling – optionally with soundproofing and lighting - Slats made of wood, steel, stainless steel, or plastic - Perforated steel plate on top of wood slats - Vise holder - Holder for pipe welding - Spot extraction arm Your advantages of the ISI-Flow Desk series: - 12 device variants available - Piping can be connected on the right, left side, or on both sides - Electric height adjustment at the push of a button - Wide range of mounting and connection accessories - Quality Made in Europe The ISI Air extraction table must not be used in conjunction with ATEX zones. The images may contain accessories.

Condition: used, Oil Mist Extractor, Emulsion Mist Collector, LOSMA AS.7 Oil Mist / Emulsion Mist Separation Unit – Aspirofilter (2000), Used Machine Manufacturer LOSMA S.r.l. (Curno, Bergamo, Italy) Model Iodpfszdgawex An Iebc AS.7 Overall Dimensions Width: 540 mm Depth: 580 mm Height: 610 mm Technical Specifications Year of Manufacture: 2000 Type: Oil Mist and Emulsion Mist Extraction Unit Series: Aspirofilter Condition: Used machine. Manufactured in 2000. Filter replacement required. Suitable for industrial oil mist and coolant mist filtration applications.

Condition: excellent (used), Year of construction: 1996, Huriccan Dambauer chip extraction system Filter area: 40 m² 4 barrels (chip containers) Air volume: 5000 m³ Motor power: 5.5 kW Complete with extraction pipes and pneumatic shut-off valves for 8 machines Self-dismantling (dismantling and loading available at extra cost) Price: 5000.- Ibjdpfx Anjy Sv Axe Iec Available from August 2026

Condition: used, Clean air extraction HÖCKER-POLYTECHNIK Vacumobil EA 250-4 -ge Air filtration via filter bags, Ibsdpfx Asy R Upzen Iec Motorized cleaning, Dust tested, Mobile collection bin ----- Technical specifications ----- Extraction nozzle Ø: 250 mm, Nominal air flow: 4,241 m³/h, Minimum air flow: 3,534 m³/h, Number of collection bags: 3 pcs, Motor: 4 kW, Dimensions (LxWxH): 2,500x1,280x2,500 mm, Weight: 630 kg

Condition: used, Year of construction: 1993, machine/vehicle number: HZ668, DEMAG KBK 2 – Overhead Crane System, Bridge Crane, Hall Crane The images show an example overhead crane system with the components listed below. These components are also available individually! Please request a quote for your overhead crane system, tailored to your specific dimensions. Load capacity / lifting capacity from 80, 125, 250, 500 up to 1000 kg. KBK 2-R left-hand switch (with collector line) KBK 2-R swivel disc, 2000 mm (with collector line and electric swivel function) 71515146 KBK 2-R curved rails 15, 30, 45, 60, 90 degrees (with collector line) KBK 2-R rails (with collector line) The system can be delivered completely according to your requirements. Rails, rail connectors, trolleys, end plates, cable carriers, supports/hangers, and accessories are available. Iedpfx Anoy Ufdde Isbc Chain hoists available upon request. Very good, used condition. Shipping via freight forwarder is possible. Demag KBK1, KBK2, and KBK3 rails are in stock!

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 8011510B, functionality: fully functional, filter area: 72 m², production capacity: 80,000 unit/h, Equipment: CE marking, TECHNICAL DETAILS Capacity: 80,000 m³/h Number of filter bags: 384 pcs Filter length: 2,500 mm Filter diameter: 230 mm Filter area: 72 m² Ibjdpfey Ai Tfex An Ioc MACHINE DETAILS Connected load: 15 kW Weight of upper section with motors: 4,000 kg Weight of intermediate section with filter sleeves: 4,000 kg Weight of lower section with legs: 2,000 kg Main fan: 12 pcs Power of main fan: 15 kW Nominal air flow: 22 m/s EQUIPMENT Return lines Control cabinet CE marking Extinguishing system Control cabinet Shaking system Vacuum installation Note: The machine has already been dismantled.

Condition: new, Year of construction: 2026, Manufacturing of various types of dust collectors and dust removal systems, 2.2-22 kW. Isdpfx Anezl N Ewj Iebc

Condition: ready for operation (used), Supfina 808-261 tool spindle with tool holder, used, good condition, 100% functional, scope of delivery as per photos Ibodpfx Aez Ac Nqjn Ijc