Used Screw Compressor S016200 for sale (7,517)

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: Dsdpfx Akozu Aibjmewc The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press

Condition: used, Year of construction: 2004, Technical details: pressure capacity: 10 bar volume capacity: 1,1 / 0,95 m³/min. rotary speed of motor: 8500 U/min Number of working hours: 29.498 h weight: ca. 310 kg dimensions L x W x H: Kompressor: 1,5 x 0,7 x 1,5 m dimensions L x W x H: Kälte Trockner: 0,45 x 0,45 x 0,5 m On a steel structure, welded, the feet are stabilized with rubber feet, stand: Compressor: -15 bar working pressure -speed max. 8.500 rpm. -Cooling air 980 m³/h -volume flow at 7.5 bar = 1.1 m³/min. and at 10 bar = 0.95 m³/min. Djdpfx Aez Dudaokmswc Refrigeration compressed air dryer type 406AP: -volume flow 65 m³/h -Cooling air demand 450 m³/h -refrigerant R 134a -compressed air perm. min./max.: 2 / 16 bar -pressure perm. refrigerant min./max.: 15 / 50 bar -2x connections with 3/4" and 1/4" each Compressed air tank Renner: -Tank size Ø 500 x 1.350mm -operating pressure max. 11 bar -content for 250 liters -div. connections *

Condition: good (used), Year of construction: 2014, Has been serviced regularly. Technical values: 81.2 L/s, 13 bar. Connection values: 400V / 50HZ, 26kW Width: 1260 mm Depth: 860 mm Height: 1500 mm Dwjdpfx Akjvmpt Usmjc Weight: 520 kg

Year of construction: 2007, condition: used, Screw compressor with refrigeration dryer - Manufacturer: Boge - Model: C9 - Year of manufacture: 2007 - Max. pressure: 8 bar Dwodpfx Aez Hm Rkekmjc - Max. air flow: 1,180 m³/min. - Motor power: 7.5 kW - Width x depth x height: 480 x 987 x 1,234 mm - Volts/Hz: 400/50 - Weight: 210 kg Refrigerated dryer - Boge Ultratroc - Type. SD 0050 AP - max. 16bar - Location: Warehouse, D-32825 Blomberg

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 349029, overall weight: 2,010 kg, noise level: 69 dB, Equipment: type plate available, Voltage: 400V Phase: 3 Frequency: 50 Hz Flow rate: 14.72 m³/min Speed: 3000 min⁻¹ Intake pressure: 1 bar Installed motor power: 75 kW Compression medium: Air Stage pressure: 7.5 bar g Full load current: 169 A Dwjdpfswrrn Dex Akmoc The CompAir screw compressor L80-7.5A is a reliable and efficient solution for compressed air supply in various industrial applications. With its robust design and modern technology, this model ensures stable and continuous compressed air supply that meets the high requirements for performance and reliability. The compressor is characterized by its easy operation, low energy consumption, and minimal maintenance, making it an economical choice.

Condition: excellent (used), Year of construction: 2016, S016860 Dodpfx Akoz Dgbqemjwc PROD. ATLASCOPCO TYPE GA160 S/N APF208686 YEAR 2016 POWER (kW) 164 CAPACITY (m3/min) 21 PRESSURE (bar) 10 HOURS (RUNNING/TOTAL) FREQUENCY CONVERTER no BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 3 NEW/USED USED

Condition: excellent (used), Year of construction: 2019, PROD. KAESER TYPE CS121 S/N 1210619 YEAR 1996 POWER (kW) 75 CAPACITY (m3/min) 11.5 Dwsdpsz Dinajfx Akmoc PRESSURE (bar) 7.5 HOURS (RUNNING/TOTAL) 59688 / 82105 FREQUENCY CONVERTER no BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 2 NEW/USED USED

Condition: excellent (used), Year of construction: 2004, operating hours: 59,690 h, functionality: fully functional, power: 90 kW (122.37 HP), volume flow: 882 m³/h, pressure (max.): 8.75 bar, type of cooling: water, Equipment: refrigerant dryer, type plate available, Screw compressor Atlas Copco ZR90VSDFF Inverter and dryer integrated. 90 kW Dodpfoyuvwaox Akmewc 8.75 bar 14.70 m³/min

Condition: excellent (used), Year of construction: 2000, S015037 PROD. Ingersoll Rand TYPE MH37 GD S/N 2272812 YEAR 2000 POWER (kW) 43 PRESSURE (bar) 10 CAPACITY (m3/min) HOURS (RUNNING/TOTAL) 9080/37508 FREQUENCY CONVERTER no BUILT-IN DRYER no HEAT EXCHANGER no COOLED (AIR/WATER) AIR TANK no CONNECTION 1 1/2" G112 Dedpfxsz Hmddo Akmewc DOCUMENTS NEW/USED used

Condition: good (used), Year of construction: 1993, Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Manufacturer: Mahle, screw compressor type MSK G11 Dwjdpfx Aszulbtskmsc -Drive power: 11 kW -Volume flow rate: 1.48 m³/min -Max. pressure: 10 bar -Individual components: see photos -Dimensions: 730/690/H1315 mm -Weight: 291 kg

Condition: excellent (used), Year of construction: 2014, S016896 PROD. ATLAS COPCO TYPE GA75VSDFF S/N API668061 YEAR 2014 POWER (kW) 75 CAPACITY (m3/min) 15.09 DISCHARGE PRESSURE (bar) 12.75 HOURS (SERVICE/TOTAL) FREQUENCY CONVERTER yes BUILT-IN DRYER yes, R410a 1.1kg HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no NEW/USED USED Dwsdpfx Aszi Dbhjkmoc

Condition: excellent (used), Year of construction: 2002, PROD. KAESER TYPE CSD102T / 100304.0 Dwjdpfx Ajzwnykskmoc S/N 1049 YEAR 2002 POWER (kW) 55 OUTPUT (m3/min) 10.1 PRESSURE (bar) 8 HOURS (RUNNING/TOTAL) FREQUENCY CONVERTER no BUILT-IN DRYER yes HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 2 NEW/USED USED

Condition: excellent (used), Year of construction: 2012, operating hours: 11,118 h, functionality: fully functional, power: 90 kW (122.37 HP), volume flow: 972.6 m³/h, pressure (max.): 7.5 bar, type of cooling: air, Equipment: type plate available, Premium used Atlas Copco GA90 Djdpfx Aet E I D Eekmjwc 90 kW 7.5 bar 16.21 m3/min Only 11,118 operating hours!

Condition: used, Year of construction: 2004, Technical details: Dodpsu Szlujfx Akmswc feed pressure: 9,75 bar liter capacity: 10,1 l total power requirement: 5,5 kW volume capacity: 10,1 m³/min. Number of working hours: 26071 h revolutions per minute of the motor:: 3000 U/min. protection class: CE 0038 machine weight approx.: 310 kg dimensions L x W x H: 1,2 x 0,6 x 1,0 m Condensate separator installed. Restriction: Overload valve does not switch off automatically. For sale as is. *

Year of construction: 2008, condition: ready for operation (used), Max. operational pressure: 11bar, motor rotational speed: 2945/min, nominal power: 30kW, operational hours counter: 67,685h. Dsdpfx Ael Dxmfjkmswc

Condition: excellent (used), Year of construction: 2019, Equipment: compressor, ATLAS COPCO XAS88 COMPRESSOR, 5.2 m3, 2019 DIESEL compressor ATLAS COPCO XAS 88, fully serviced Technical specifications: capacity: 5.20 m3/min; operating pressure: 7 bar; Dwedpfx Akerdf Swjmjc year of manufacture: 2019; engine: KUBOTA operating hours: 1519 h!!! compressor in fully working order Below is a link to a video showing the machine in operation.

Condition: used, Year of construction: 2017, feed pressure / bar Dwedpoxy S H Tsfx Akmjc liter capacity / l Air consumption / m³/h

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, DIESEL ATLAS COPCO XAS 67 Compressor – Serviced! The compressor is registered in Poland. Technical specifications: Capacity: 3.60 m3/min; Operating pressure: 7 Bar; Year of manufacture: 2015; Engine: KUBOTA Operating hours: 1847h! The compressor is fully functional, ready for work, and comes with a warranty. Net price: 32,500 PLN Gross price: 39,975 PLN Dsdpfxszwmlrs Akmowc Below is a link to a video demonstrating the machine in operation.

Condition: new, Year of construction: 2026, PROD. MARK TYPE MSM3 D 200 S/N ITJ1061384 YEAR 2026 POWER (kW) 3 OUTPUT (m3/min) 0.33 m3/min PRESSURE (bar) 10 HOURS (RUNNING/TOTAL) 0 INVERTER NO BUILT-IN DRYER YES, R513a, 0.17 kg EXCHANGER NO COOLED BY (AIR/WATER) Air WITH TANK YES, 200 L DOCUMENTS YES Dwedpfx Ajz I Riyjkmoc New/Used NEW

Condition: excellent (used), Year of construction: 2003, S014178 PROD. ATLAS COPCO TYPE GX7 S/N AII629046 YEAR 2003 POWER (kW) 7.5 CAPACITY (m3/min) 1.17 PRESSURE (bar) 10 HOURS (SERVICE/TOTAL) 21268 Dsdez D Duhjpfx Akmswc FREQUENCY CONVERTER NO BUILT-IN DRYER NO HEAT EXCHANGER NO COOLED (AIR/WATER) AIR WITH TANK YES, 500 L DOCUMENTS YES, available at the service center NEW/USED USED

Condition: excellent (used), Year of construction: 2016, S016967 PROD. KAESER TYPE SK22 S/N 1566 YEAR 2016 POWER (kW) 11 CAPACITY (m3/min) 1.75 PRESSURE (bar) 8 HOURS (RUNNING/TOTAL) FREQUENCY CONVERTER no BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no Dwsdpfx Ajz Duqtskmjc CONNECTION 1 NEW/USED USED

Condition: good (used), Year of construction: 2010, The device has been well maintained. Comp. air Pmax: 13 bar Refr. Pmax High: 18.7 bar Electrical connection values: 230 V / 50Hz, Kw 1 Ph Width: 460 mm Depth: 500 mm Dodpfx Akovmqkhsmowc Height: 830 mm Weight: 60 kg

Condition: excellent (used), 7.5 kW motor 1000 rpm Pressure: 10 bar Dwjdpfx Akozvnrwomoc Tank: 350 liters

Condition: excellent (used), Year of construction: 2020, S016059 PROD. ALUP TYPE SCK30 CE S/N ITJ370650 YEAR 2020 POWER (kW) 22 CAPACITY (m3/min) 3.22 m3/min PRESSURE (bar) 10 HOURS (RUNNING/TOTAL) 0 (new controller) INVERTER NO BUILT-IN DRYER NO EXCHANGER NO COOLED (AIR/WATER) AIR ON TANK NO DOCUMENTS YES CONNECTION NEW/USED Used Djdjz A Tm Dspfx Akmowc

Condition: excellent (used), Year of construction: 2013, PROD. KAESER TYPE BSD83 S/N 1036 YEAR 2013 POWER (kW) 45 CAPACITY (m3/min) 8.16 PRESSURE (bar) 8.5 HOURS (RUNNING/TOTAL) 41872/62783 FREQUENCY CONVERTER no BUILT-IN DRYER no EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 1 1/2' NEW/USED USED Djdpfxozq Aluo Akmjwc