Used Section Bender for sale (3,048)

Year of construction: 2018, condition: good (used), Make: FACCIN Type: 4HEL 3590 Control: Siemens TOUCH Year: 2018 Specifications Metric US Standard Rolling width 3500 mm Rolling thickness 3x toproll Ø 80 mm Rolling thickness 5x toproll Ø Dkjdpfx Ajkvm Nfod Nsl 110 mm Rolling thickness prebending 90 mm Top Roll Ø 900 mm Top Roll Ø 900 mm Bottom Roll Ø 800 mm Side roll Ø 600 mm Number of rolls 4 Rolling speed 0-6 Adjustiment lower roll 0-200 mm/min. Adjustment side rolls 0-400 mm/min. Top support yes Side supports yes Number of driven rolls 2 Power 90+75+9 kW Dimensions (Estimate) Length 4430 mm Width 8800 mm Height 11000 mm Weight 178000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2026, neu 2026 090194 Mai 2026, Zwischenverkauf Spanien Dedpswirnxjfx Ad Nokl 22400 € 430.08 € 1 60 to 250 mm 5 40 x 11 mm 32 1/min 350 x 15 mm 120 x 10 mm 45 / 40 mm 10 mm max. 150x10 mm 5.5 kW 1850 mm 1300 mm 2100 mm 1390 kg with bending station 5 working stations flat steel shear with device to reduce deformation angle iron shear with round- and squarebars opening triangle notcher punching station press brake device for flat steel table at flat steel station table at notching station length stop 1000 mm with contact switch, for angle, flat or bar station hydraulic drive 2 foot release user manual in GERMAN and ENGLISH WE HAVE MORE THAN 700 REFERENCES!

Condition: new, neu ca. 8 Wochen ab Auftragse Spanien 49600 € 947.36 € 130 to 600 mm 5 2 50x18 mm 80 mm 600x18 (max. 600x20 mit D mm 120x120x11 (max. 150x150x mm 45/40 mm 130x12 mm 250x12 mm Djdpfxsynnggs Ad Nokl 15 kW hydraulic drive 2 foot pedals for independant working on punching and section station bending unit with 2 dies, V50 and V90 flat steel stationWITH DEVICE FOR REDUCING DEFORMATION angle iron station with round and square bar cutting triangular notching station with table and gauge punching station with table and gauge gauge 1000 mm with contact switch, for angle / flat steel station operating manual in German and Englisch

Condition: new, neu ca. 10 Wochen ab Auftrags Spanien 35600 € 679.96 € 110 to 610 mm 5 40/20 bzw. 28/28 mm 80 mm 28 1/min 600x15 / 400x20 mm 152x152x13 mm 50 mm 13x52x90 mm 9 kW Dodpfjynmrbox Ad Nokl 2690 mm 1400 mm 2200 mm 3300 kg 2 foot pedals for independent work at 2 stations hydr. drive flat bar shear angle bar shear with minimum deformation by diagonal moving of the blade round and square bar shear rectangular notching unit punching unit up to diam. 40 mm fast hydraulic, centring device oilfilling table at the punching station with gauge table at the notching unit with gauge table at the flat bar shear user manual in GERMAN and ENGLISH OPTION: Kit € 970,00 length stop 1000 mm with contact switch, for angle, flat or bar station magnetic machine lamp 10 set round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, 24 and 26 mm

Condition: new, neu ca. 10 Wochen ab Auftrags Spanien 72800 € 1375.92 € 165 to 610 mm 5 40/30 bzw. 34/34 mm 110 mm 31 1/min 750x20 / 400x30 mm 205x205x18 mm 60 mm 16x58x110 mm 15 kW 2950 mm 1600 mm 2200 mm 6300 kg 2 foot pedals for independent work at 2 stations hydr. drive flat bar shear angle bar shear with minimum deformation by diagonal moving of the blade round and square bar shear rectangular notching unit punching unit up to diam. 40 mm fast hydraulic, centring device oilfilling table at the punching station with gauge table at the notching unit with gauge table at the flat bar shear user manual in GERMAN and ENGLISH (sample photos) OPTION "KIT" € 970,-- length stop 1000 mm with contact switch, for angle, flat or bar station magnetic machine lamp 10 set round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, 24 and 26 mm Further available models of HYD 165 series: model S € 55.200,-- as model SD but 510 mm gap weight 5.200 kg (sample photos) WE HAVE MORE THAN 700 REFERENCES! Dkjdpfx Adeynmq Rj Nsl

Condition: excellent (used), overall weight: 39 kg, Angle bender Dkedpeyimzkefx Ad Nsl Manufacturer: Gressel (28687) Model: HB 20 Maximum bending height: 100 mm Maximum clamping opening: 40 mm Bending capacity in steel: 100 x 7 or 50 x 10 mm Weight: 38.5 kg

Condition: new, Year of construction: 2025, Sheet metal folder RED 2200/0.8 + wheels Bending machine with side cutouts for bending from up and down. Thanks to it, you will make your window sill ready. In the machine's construction there is a place for bent processing at a height of 6 cm up and down. It is a modern sheet metal folding machine that bends sheet metal from three sides. max. working length: 2200 mm bending: 0.8 mm steel sheet 1.2 mm (aluminum, copper, zinc) bending beam: 15 mm Djdpfx Ascqu Dged Nskl bending angle max. 150 degrees max. opening: 80 mm weight: ca. 250 kg

Condition: used, round bar steel 34 mm square edge steel 30 x 30 mm L-beam 100 x 10 mm flat steel 100 x 14...160 x 11 mm blade length 175 mm T-beam 100 x 10 mm notching: l + T material 10 mm hole punhing press: pressure 45 t throat 305 mm total power requirement 3 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 0,8 x 1,5 m * 5-fold combinated profile steel shear incl. Dksdpfoyh Rnkox Ad Nol flat steel shear profile steel shear bar steel shear notcher hole punch * 2 foot switches * contact limit stop * various punching saddles

Year of construction: 2018, condition: excellent (used), functionality: fully functional, For sale: Beil M-B-HD-XL105 CTP plate bender. Year of manufacture: 2018 Type number: 52200042 Serial number: 31269 Dedpfxouhlk Ts Ad Nekl Additional Information: • Sold directly by the seller • Viewing and testing available on-site • Consultations with our technician can be arranged • Currently located in Kaunas, Lithuania • Terms: EXW

Condition: new, Year of construction: 2026, "Prod-Masz" your partner when it comes to bending. Our name stands for innovative products of the highest quality and reliability. Our bending machines impress with their particular flexibility, performance and versatility. Folding beam only 15mm RED 3200 / 0.8mm Dkedpfx Adscv S H Aj Nol Technical specifications: the maximum working length: 3200 mm Bending capacity: 0.8 mm (steel) 1.2 mm (aluminum, copper, zinc) Folding beam thickness: 15 mm Bending angle: max. 150 degrees Upper cheek opening: 80 mm Weight: approx. 600 kg The price also includes the front depth stops and the rear frame. Bending from 3 sides -> cutouts to the side 60mm / 45 ° recess Price: 5100.00 EUR rotary shears + 350 Euro Delivery date: every week We are looking forward to your contact! The invoices are issued either with 0% of VAT as intra-Community delivery.

Condition: new, Year of construction: 2026, Are you looking for a machine for sheet metal processing? Do you expect quality and reliability? Professional advice as well as accurate and punctual deliveries will be provided by Prod-Masz. ZGR-2140/1.5mm (2mm Alu) the maximum working length 2140 mm the thickness of the steel sheet up to 1.5 mm non-ferrous metals 30% higher bending performance bending angle: 145 degrees (on request up to 165 degrees) cut throughout the working length a table for supporting the rear plate gas springs beam curving 20 mm weight approx 350 kg hand-held machine raising the upper beam into three positions Dkodjc Ikrqepfx Ad Njl maximum ground clearance of 100 mm between the beams

Condition: new, Year of construction: 2026, ZGH type machines are a versatile solution for sheet metal processing. They can be used universally for demanding craft operations. To create this versatile solution for all applications up to 1.2 mm sheet steel, PPHU Prod Masz drew on its years of experience in mechanical engineering. The ZGH offers the optimum in precision, durability and stability. This model is equipped with a control panel. the maximum working length 3140 mm the max. thickness of the sheet for 1.2 mm (steel) the weight of the hand machine is around 2100 kilograms the lifting of the upper beam in three layers bending beam: 30 mm the max. clear width between the beams 100 mm bending angle: 150 degrees delivery to Germany 750 euros delivery date: up to 2 weeks roller shears optional for an additional charge rear stops with scale optional for an additional charge Dkjdpfxoc I Tn Hs Ad Nol we look forward to hearing from you!

Year of construction: 2017, condition: used, Engine unit / engine computer / engine control unit BOSCH 51.25820-10 Coming from: MAN TGS 26.420 Euro 6 Year of manufacture: 2017 Cevoman bv. Lenskensdijk 5 2200 Herentals Dksdpoyhfnzsfx Ad Nol Belgium

Condition: new, Year of construction: 2020, Electric elbow making machine is the mechanism for forming elbow from round and rectangular pipes with different diameters. Elbow making machine EEM-200plus is the better version of EEM-200 machine. It has additional fourth bottom pressing tool so it presses pipes from all four sides while bending and provides better quality of elbow. You can use our machine for working with round pipes as with rectangular pipes. Elbow making machine EEM-200plus lets you to work with pipes from 80 to 200mm. Pay attention: Inside diameter of the pipe you use for bending has to be 1mm bigger than bending matrix of the machine!! The lock of the pipe has to be closed or welded to avoid opening of pipe while bending!! Dkjdpfxef Epznj Ad Nel Elbow making machine EEM-200 is electric so it doesn’t need any air or oil system to work. Electric consumption is 1.5 kW/hour for this elbow machine. The needed voltage is 380V. It could be used in environment with temperature from -5 to +45 Celsius degrees. Elbow making machine is good for bending pipes with maximum thickness 0.8mm. Elbow making machine EEM-200plus bends elbows thank to special pressing tools. There is one set of tools for bending one diameter of pipe you need. So to bend more diameters of pipes you have to get additional pressing tools. It goes four pressing set tools with the machine so you can bend four diameters of pipes with it in the range from 80 to 200mm (that you choose by your own)

Condition: new, Year of construction: 2025, Manual pan & box brake SM 1270x2 mm is a machine for bending different elements from the metal sheets with maximum length 1270 mm and maximum metal thickness 2mm. Usually folding machines are used for producing roofing elements, ventilation elements, drainage system elements etc. But manual pan & box brake SM 1270 thanks to special segmented bars can bend boxes and façade cassettes in addition to standard bending elements. Segmented bar is a bar consisted of parts with different lengths. So you can adjust it to the length you need to bend boxes and cassettes from all four sides. There are models of manual pan & box brakes we produce: Manual pan & box brake SM-1270 x 2mm Manual pan & box brake SM-1550 x 1.8mm Manual pan & box brake SM -2020 x 1.2mm Those manual box & pan brake in standard set have two bars segmented: The upper bar and rotation bar. The upper bar has a 135 degrees’ angle, so it’s possible to bend elements with maximum bending angle up to 135 degrees. The standard set of manual pan & box brake SM includes: - Manual box & pan folder - Angle measuring device - Four position angle limiter - Two segments with side cuts to bend cassettes with inside bends. Dedpfxsf Eywwj Ad Njkl As an additional option you can get: -Third segmented bar -Segments tempering option (in standard set pan & box brake’s segments go not tempered, but if you work with metal thickness more than 1mm we advise to temper one- so rigidity of segments will be higher and usage time of machine longer); - Change of upper segments height (from 30 to 45mm). So it lets to bend cassettes with height up to 45mm instead of 30mm. - Cross cutting knife. Designed for cutting metal sheets before bending them with folding machine. The maximum metal thickness for cutting is 0.8mm; - Multifunctional acceptance table to adjust different length limiters in different parts of bending machine. So it lets to save your time while same sizes cassettes or elements production. Dimension: 160.00Sm x 82.00Sm x 120.00Sm Weight: 350.00Kg

Condition: ready for operation (used), functionality: fully functional, Plate rolling machine, 3000 mm capacity, H. Vuillot 3000 mm, used machine Dedjwcqpnspfx Ad Njkl Manufacturer: H. Vuillot Sheet capacity: 3000 x 27 mm Top roll diameter: Ø445 mm Bottom roll diameter: Ø330 mm Year: 1972

Condition: new, Very robust motorized 3-roll roller Weight 670 kg Executed with hardened rolls Hardness is HRC 28-32 Min. Sheet thickness ----- 0.5 mm Max. Plate thickness ----- 3 mm Max. Working width ----- 1000 mm Dkjdpfx Asga Tz Ajd Njl Pre-bending ----- 2.5 mm Roller diameter ----- 95 mm Motor power ----- 1.5 KW INCLUDED * Hardened rollers * SCHNEIDER electrical components

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 10 h, functionality: fully functional, coil weight: 15,000 kg, sheet thickness aluminum (max.): 4 mm, sheet thickness steel (max.): 4 mm, sheet thickness copper (max.): 4 mm, inner diameter: 508 mm, sheet thickness (max.): 4 mm, outer diameter: 1,800 mm, coil width: 1,600 mm, number of blades: 4, type of input current: three-phase, warranty duration: 12 months, straightening roller diameter: 75 mm, load capacity: 15,000 kg, space requirement width: 3,500 mm, space requirement length: 12,000 mm, space requirement height: 3,500 mm, feed roller diameter: 250 mm, number of feed rollers: 2, CTL Demaq Evo. New, stock. Coil up to 15 Tons D1800, 20-24" Nominal. Dsdpfxou Ey D So Ad Nokl Coil Cart hydraulic. 2 pinch-role of feeder and 11 straight rolls. Hardened and chromed. Servo Nidec in straightener and decoiler. 4 longitudinal knifes, axis (HC) 230 mm, knifes 300 mm. Transversal shear. Full made in Spain in our facilities. Optional other devices and configurations. The most advanced Demaq SPL machine. 2 units available.

Condition: new, Shaft diameter: 580working speed: 3-6motor power: 30length: 2760width: 2310heigth: 2680weight approx.: 14400 Technical specifications: Welded steel construction frame 3 rollers are driven Hardened and ground shafts made of high-strength special steel Rollers are hardened and ground Dedpfxoh Alh Ho Ad Nskl Horizontal and vertical working position Hardened standard rollers Mobile control panel Angular side guide rollers Brake motor equipped for precision bending Digital displays (2 pieces) Options: Digital display STANDARD NC unit 10 screen EURO 11,500.00

Condition: new, functionality: fully functional, Year of construction: 2025, controller manufacturer: Self-developed brand, workpiece length (max.): 2,000 mm, workpiece height (max.): 160 mm, nominal power (apparent): 45 kVA, number of spindles: 14, machine/vehicle number: 2016, Product Features: Dodsxu Uhvepfx Ad Nekl The KaFe manual Panel Bender (Bending Center) is a next-generation, fully automatic multilateral bending center, offering high precision and efficiency. It represents a benchmark for automated production in the sheet metal manufacturing industry. It significantly reduces labor costs and boasts a bending speed three times that of CNC press brakes, reaching 0.5 seconds per cycle. Full servo control ensures product accuracy within 3 seconds. Product Function: The KaFe Manual Panel Bender (Bending Center) can bend sheet metal into various complex shapes without the need for molds. Equipped with a pure electric servo system, it replaces hydraulic drive and offers environmentally friendly, high-speed, high-precision, and maintenance-free features. This high-tech product was developed and manufactured to improve production efficiency, reduce labor intensity, and enhance corporate image in the sheet metal industry.

Condition: new, Year of construction: 2026, The ESR-1300/2.5 three-roll electromechanical rolling mill with asymmetric shafts is used to produce cylindrical and conical shells of various diameters. This machine is designed for bending sheets up to 2.5 mm, length 1300 mm, upper shaft diameter 90 mm. The most popular are three-roll bending machines from this series, due to their relatively simple and functional construction. Key benefits: Asymmetric arrangement of cylinders The lower and upper rollers rotate through a system of gears and a chain drive from an electric motor Top roller rotates in both directions, equipped with a tilt and swivel mechanism Height-adjustable bottom and side rollers (manually adjustable) Possibility of cone bending Foot control with emergency stop button Chain drive transmits rotation from the electric motor to the rollers. The upper roller is foldable, which facilitates the removal of finished products. The folding roller is equipped with a lock preventing its spontaneous opening during operation. Standard equipment Djdsmtwuyjpfx Ad Nskl DTR in Polish CE Declaration Technical data Model CORMAK ESR-1300/2.5 Maximum working width [mm] 1300 Maximum material thickness [mm] 2.5 Roll diameter [mm] 90 Motor power [kW] 1.5 Device dimensions (length x width x height) [mm] 1800 x 640 x 1000 Weight of the device [kg] 600 NOTE: Standard Equipment Ratings are based on 260 N/mm Cold Yield Metals 2 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, functionality: fully functional, Year of construction: 2026, The ESR 2020 x 3.5 mm three-roll electromechanical rolling mill with asymmetric shafts is used to produce cylindrical and conical shells of various diameters. This machine is designed for bending sheets with a thickness of up to 3.5 mm, length up to 2020 mm, diameter of the upper shaft 125 mm. The most popular are three-roll bending machines from this series, due to their relatively simple and functional design. Most suitable for those customers who are looking for equipment with medium performance and low cost. The most important advantages: Asymmetric arrangement of the rollers The lower and upper rollers rotate through a system of gears and a chain drive from an electric motor The upper roller rotates in both directions, equipped with a tilt and turn mechanism Height adjustable lower and side rollers (manually adjustable) Cone bending possible Foot control with emergency stop button Technical data: Model: ESR 2020 x 3.5 mm Maximum work width: 2020 mm Maximum material thickness: 3,5 mm Roller diameter: 125 mm Motor power: 3 kW Dimensions 2530 x 640 x 1050 mm Weight 1230 kg. (±2%) Standard equipment: Foot controller for operation Manual in Polish/English CE declaration The price is a net price. Price does not include shipping costs. Djdpfx Aorh E Nrjd Nskl For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, functionality: fully functional, Year of construction: 2026, Electromechanical Plate Rolling Machine ESR 1300 x 4.5 mm Asymmetrical 3-Roll Design | Max Thickness: 4.5 mm | Working Width: 1300 mm The ESR 1300 x 4.5 mm electromechanical plate roller is designed for the production of cylindrical and conical shapes with varying diameters. It is suitable for bending sheet metal up to 4.5 mm thick and 1300 mm wide, with a top roll diameter of 120 mm. This model is part of a popular series of 3-roll bending machines appreciated for their simple yet functional construction. Machine Description Asymmetrical roll arrangement for increased flexibility in shaping Top and bottom rolls powered via gear and chain transmission driven by an electric motor Top roll can rotate in both directions and is equipped with a tilting and swiveling mechanism for easy part removal Manually adjustable lower and side rolls for precise bending control Cone bending capability Dkjdpfsw H Rqyjx Ad Njl Foot pedal controller with an emergency stop button for safe and convenient operation Technical Specifications Parameter Value Model ESR 1300 x 4.5 mm Max. working width 1300 mm Roll diameter 120 mm Max. sheet thickness 4.5 mm Motor power 2.2 kW Machine dimensions (L × W × H) 1810 × 640 × 1050 mm Approx. weight 660 kg (±2%) Standard Equipment Foot pedal control unit User manual CE Declaration of Conformity Manufacturer: Cormak

Condition: new, functionality: fully functional, Year of construction: 2025, working width: 6,400 mm, bending angle (max.): 150 °, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, sheet thickness brass (max.): 3 mm, sheet thickness copper (max.): 3 mm, overall weight: 17,750 kg, total length: 8,000 mm, total width: 1,800 mm, total height: 1,875 mm, warranty duration: 12 months, Equipment: documentation/manual, safety light barrier, EVOBEND D-Series: Flexibility and speed at the highest level Maximum flexibility and precision The EVOBEND D-Series, equipped with the SmartBend principle, offers unparalleled versatility. Complex profiles that could previously be finalized manually or not made at all can now be produced fully automatically. The innovative bending technology ensures fast and precise results thanks to minimal, simultaneous movements. Highest speed As the fastest long folding machine, the EVOBEND D series works with maximum efficiency regardless of the machine size. Each axis can be controlled individually to optimize the entire bending process. This allows the speed to be adapted to specific work steps and material requirements. Compact design The sophisticated design of the EVOBEND D series saves valuable space in your production hall. With an insertion depth of 1250 mm and a working length of 6400 mm, the D600 machine requires significantly less space than comparable models. This optimizes the production flow and facilitates integration into existing workflows. Safety and efficiency Our machines are fully enclosed, which not only protects the operator but also the machine from external influences. Retractable safety fences and integrated light barriers ensure maximum work safety. The risk of injury is further minimized by dispensing with swing-out bending beams. Robustness and low maintenance Thanks to the use of high-quality components such as precision-manufactured parts and an all-electric drive system, the EVOBEND D series is extremely durable and requires minimal maintenance. The absence of hydraulic components reduces the risk of breakdowns and significantly reduces maintenance costs. Dodofrlpuepfx Ad Nskl Sustainability and low noise With up to 90 % lower energy consumption compared to conventional machines, the EVOBEND D series is both economically and ecologically advantageous. The quiet, electric drive technology also ensures a pleasant working environment and reduces noise pollution. Material-friendly bending technology The innovative bending principle reduces marks and damage to the workpiece to a minimum. The electric clamping beam drive adapts flexibly to different material types and thicknesses, enabling the gentlest possible processing. Top standard as standard Every EVOBEND D-Series machine is equipped with the highest quality components and functions as standard. From the dual-track gripper system to automatic adaptation to material type and thickness - EVOBEND offers uncompromising quality for demanding bending tasks.

Condition: used, Year of construction: 1993, machine/vehicle number: 9384, Buchdeckenausbiegemaschine - Case Bender Orient CXYear 1993 - Serial- No. 9384/15344 Working width max. 500mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Dkodeh Aydrepfx Ad Nol On Stock Emskirchen / Nürnberg - Can be test