Used Seitz Filtration Plant for sale (4,014)

Condition: used, Debarking plant with drum debarker and disc chipper. Debarking drum type KMW Waplan in 3 sections with electrical motors for operate the debarker. Total length 45 meter Drum diameter 3.8 meter Each drum section 15 meter in length Water bearing system with pump system. Possibility to offer extra debarking sections if more are needed. Disc chipper for production of cellulose chips type KMW HH901-T12 Iggesunds "turnable chipping knife system" Bdjdpfxjw N Rxbj Afwog Capacity up to 1200 m3 of ready made chips per hour In-feed opening 760 mm Diameter chipping disc: 3400 mm Net weight: 27000 kg

Condition: refurbished (used), Year of construction: 2023, operating hours: 5,189 h, functionality: fully functional, power: 390 kW (530.25 HP), year of last overhaul: 2026, Equipment: Basic package Inventhor 9: - MTU diesel engine 6R1300, 390 kW at 1,700 rpm, complies with EUROMOT V emission standard - Auxiliary hydraulic connection 30 l/min and 70 l/min - Roller drive via planetary gear, 380 kW – VARIO – - Load-sensing system - Fuel tank 950 liters - Longitudinal conveyor belt: belt length 4,450 mm, belt width 1,000 mm - Centrally positioned lubrication strips - 24 V electrical control system - Additional electric pump for the operation of the following functions when the engine is off: “raise/lower/fold rear conveyor, open/close comb flap, open/close comb, optionally raise/lower permanent magnet belt, optionally raise/lower folding hopper” - Complete radio remote control - Large side GRP maintenance doors - Maintenance-friendly engine compartment with LED lighting - Hydraulically reversible fan - Loading protection on both sides - Fire extinguisher - Maintenance ladder - Toolbox - Acoustic start-up warning Bdodpfx Afsyu Snujwsg - Doppstadt telematics system - Paint: RAL2011 deep orange Additional equipment: - 500 mm flat chain undercarriage unit - Watering system with hopper extension H=300 mm on both sides - Size "L" shredding system – VARIOMAT (Variomat system L600/4 – 42 teeth) - Rear conveyor length 7 m, width 1200 mm - Size "L" "Limiter" (20 pieces) - LED light package for engine compartment and rear - Central lubrication system with pump Delivery date to be arranged.

Condition: good (used), Year of construction: 1972, functionality: fully functional, This processing plant is designed for the production of creams, ointments, gels, pastes, lotions, suppository compounds, etc., with a usable volume of 100 liters. The total volume with the container closed is 123 liters; the minimum fill volume is 35 liters. The system consists of a fully enclosed stainless steel container with double jacket, which can be electrically or water heated/cooled. The container features a lid with integrated mixing units and drives. The mixing vessel is mounted on three castors and can be wheeled out for filling or cleaning purposes. The lid is mounted on a lifting column for hydraulic raising and lowering, enabling convenient cleaning and emptying. It is fitted with an observation window and two inlets with valves, which can also be used for adding other product components. Additionally, an adjustable mechanism is provided for setting the grinding gap of the colloid mill. Technical specifications: Container: Permissible operating pressure: 1 bar / -1 bar Bdedpfx Afsyx Sxcowjg Homogenizer: 1,500/3,000 rpm – 1.8/2.5 kW Anchor agitator: 19/38 rpm – 1.8/2.3 kW Spiral agitator: 29/58 rpm

Condition: used, Year of construction: 2006, operating hours: 5,126 h, functionality: unexamined, power: 3,500 kW (4,758.67 HP), overall weight: 43,200 kg, Complete oil-fat-fuelled cogeneration unit. ABC 16VDZC-1000 electric engine, AVK DIG150L-6 alternator. Complete system including supervisory management and all peripherals. The entire installation is still assembled as originally configured and can be inspected. Please contact via email. Bdsdpsy Hiuqofx Afweg

Condition: used, Year of construction: 2019, operating hours: 5,532 h, Equipment: ABS, all wheel drive, soot filter, Finished SD2500WS PLUS T4F* weather protection canopy * Air conditioning * Seat heating * Auxiliary heater * Leveling system/cross-slope control * Automatic centralized lubrication system for paver and/or screed * Infinitely variable hydrostatic drive * Front axle is a tandem swing axle * Diesel engine Cummins QSB 6.7 - EUIV(T4f) * All-wheel drive (2 x rear wheels + 4 x front wheels) * Pave Manager 2.0 Advanced * PLC electrical system (CAN bus), ECO mode, 24 V electrical system * Wheel track stone deflector * Mixing material hopper with individual control * Hydraulic front hopper * Support rollers with shock absorption * Reversible slat conveyor with double bars and individual control of conveyor belt halves * Automatic shutdown via mechanical paddles * Hydraulic screw conveyor with height scale * Two reversible screw halves (380 mm) * Ultrasonic sensors in the screw conveyor * Hydraulic screed locking * Side-mounted operator station with weather protection canopy * Variable control panel with push buttons and 7" multifunction display * Two heated Grammer comfort seats * Four LED headlights (2 x front + 2 x rear) * Dynalink Advanced - Telematics system * Hydraulic system for Pave Manager Adv. * SD2500WS THERMO with LightAssist (Paver) ----Vario screed V 5100 TV PM+* Vario screed with gas heating * Basic width 2.55 m, hydraulically extendable to 5.1 m * Compaction system: tamper and vibration * Bottom plate Hardox 500 * Hydraulic adjustment of roof profiles * Two external controls incl. leveling electronics * Leveling system Mobamatic 2+1 * FRONT WHEEL DRIVE CAN BE ACTIVATED FOR WORK ----Additional equipment and accessories* Screw 380 mm 4.42 m * Connection kit V5100/6000 * Rotating beacon * Fire extinguisher * First aid kit * Smoke extraction system * RESTRICTED SD2500WS THERMO * Hydraulic system for Pave Manager Adv. * LightAssist (Paver) * Lighting for screw conveyor * LED headlights screed left + right * 12V socket * TEMPERATURE MEASUREMENT SCREW CONVEYOR * Spray system 25L with hose * High-performance front-wheel drive * Tool set * SetAssist (Transport position) * TRUCKASSIST ADVANCED * Thermomaterial hopper * Folding material guide * Weather protection house * Hydraulic oil drain hose * STVZO - Lift axle * Infrared temperature measurement preparation * Operating manual + parts list (USB) * Operating manual * Parts list * Set of drawings A3 * Leveling system Mobamatic 2+1 * Vario screed V 5100 TV PM+ * Side guards OBT approved (G) PM * Spirit level screed Bedpey T Ukdofx Afwjdg * Holder for cross-slope Moba * Holder for height sensor MobaGrade 1x * Screed width measurement * LightAssist (Screed) * DYNAPLUS12 ----Vehicle number 12111 Errors and prior sale excepted.

Condition: new, Year of construction: 2026, operating hours: 10 h, functionality: fully functional, total width: 3,000 mm, total length: 3,000 mm, total height: 2,800 mm, IFP - KP 100 WTR Metal Degreasing and Cleaning System Key Specifications: - New system: Year of manufacture 2026 - Usable media: Water with cleaning additive - Basket dimensions (LWH): 670 / 480 / 300 [mm] - Throughput: approx. 4 batches/hour - Filling volume: 1130 liters - Connection power: 33 kW - Compressed air: 6 bar - System weight: 2600 kg System Equipment - Fully enclosed system design Bedpfszf Hp Tjx Afwodg - Rotating and pivoting mechanism - Front loading - 3 x Flood pre-treatment tanks (heated) - 1 x Process filter cleaning tank - 1 x Process filter rinsing tank - 1 x Process filter rinsing tank 2 - Surface rinsing - Glass door - Electropolished work chamber - Oil separator - Hot air drying - Vacuum drying - Sliding table with two positions - Dosing system for cleaning agents - Ultrasonic 1 kW / 25 kHz (power adjustable) - Spraying via four nozzles - 12" touch panel - Automatic water replenishment

Condition: new, functionality: fully functional, fuel type: hybrid, color: other, overall weight: 52,000 kg, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Fabo tracked impact crusher FTI-130 is a complete mobile system which moves on hydraulicly driven tracked system with 1 km/h speed and combination of a vibrated grizzly feeder, an Impact crusher, foldable stockpile conveyors, control unit and electric generator. In today's conditions and technological processes, businesses are beginning to think about how to make their field of activity more efficient. As they make it more efficient, they always take into consideration factors such as the operationality of the machines they use, their low cost and staffing needs. Our Tracked Crushers can crush with high performance even on the most demanding mine sites with its specially designed body and compact structure. Customization can be done to our tracked systems by Jaw Crusher, Primary and Secondary Impact or Cone Crusher. Advantages of Tracked Crushers; -Heavy-duty walking tracks can reach places where ordinary machines can not reach. -It has the appropriate dimensions and sound level to crush construction waste in the city. -The fuel consumption of the generator and walking track units are very economical. -System maintenance and management is very easy with latest technology control software. TECHNICAL SPECIFICATIONS: Model: FTI-130 Production Capacity: 400-500 tons per hour Maximum Feeding: 500 mm Crusher Type: Impact Crusher SIZE: 1270x1200 mm CSS Setting: 0-50 mm Total Power: 500 kva Weight: 52000 kg Bodjzd Nr Uopfx Afwsdg - Low investment and operation cost – Zero substructure preparation – Easiness at usage and maintenance – Easy assembly and disassembly FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: refurbished (used), Year of construction: 2019, operating hours: 3,703 h, functionality: fully functional, machine/vehicle number: Bau Nummer 443, overall weight: 30,000 kg, total width: 2,500 mm, transport width: 2,500 mm, year of last overhaul: 2025, We offer this refurbished Doppstadt DW-3060 K single-shaft shredder, manufactured in 2019. Telematics active until 06/2028 All bearings and all conveyor belts are original, new Doppstadt parts All wear parts are original, new Doppstadt parts Manufacturer: Doppstadt Model: DW-3060 K Year of manufacture: 2019 Condition: refurbished Bjdpfx Afszhlpwewodg Category ID: 2097 Type ID: 2590 Machine type: Single-shaft shredder If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 12389, Equipment: documentation/manual, We are offering this used FAT T1 regeneration system, manufactured in 2013. 1. Brief Description For sale is a thermal sand regeneration system from the German manufacturer FAT Förder- und Anlagentechnik GmbH. The system is currently in operation and is being sold solely due to a capacity expansion at the site. The sale is not due to any technical or economic deficiencies. The system has only been operated in a production hall and is in very good technical and visual condition. 2. Technical Data Manufacturer: FAT Förder- und Anlagentechnik GmbH Type: T1 Factory Number: 12389 Year of Manufacture: 2013 Fuel: Natural Gas Thermal Output: 350 kW Regeneration Temperature: approx. 850 °C Throughput: approx. 850 to 1,300 kg/h Sand System: PEP-SET / Cold Resin Systems Volatilization Loss: up to approx. 0.1% Installation: Production Hall Availability: Dismantling from mid-September 2026 3. Scope of Supply The scope of supply includes:  Frequency-controlled sand dosing via screw conveyor  Sieve  Magnetic Separator  Thermal Regeneration Furnace  Cooler Sand/Air Cooler (Recuperation) Air/Water Cooler Chilling Unit  Control Cabinet  PLC Control  Electrical Equipment  Pneumatic Components  Original FAT Documentation Not included in the scope of supply:  Dust extraction system, as it is connected to a central extraction system  Sand conveyor after the cooler The system is currently connected to the existing central dust extraction system of the plant. 4. Performance Features The system was designed for the regeneration of chemically bonded molding materials and achieves excellent regeneration results. Special Features:  Volatilization loss up to approx. 0.1%  High regenerant quality  Economical natural gas operation  Robust FAT construction  Proven industrial continuous operation  Complete technical documentation available Bodpfx Afozhvagjwjdg 5. Documentation Scope The following documents are complete:  Operating Instructions  Maintenance Instructions  Circuit Diagrams  Pneumatic Diagrams  Installation Plans  Layout Drawings  Water Installation Plans  FAT Construction Drawings  Technical Documentation (2 folders) + Switchgear Planning The completeness of the documentation has been verified. 6. System Condition The system is in continuous production operation until dismantling. Advantages for the buyer:  Functional demonstration possible during operation  Inspection possible by appointment  Documented system condition  Weather-protected hall installation  Weather-independent dismantling and loading 7. Dismantling and Availability Dismantling is expected to be possible from mid-September 2026. The system is located inside a production hall and is very easily accessible for dismantling and loading operations. 8. Reason for Sale The system is being sold solely due to a capacity expansion at the production site. The existing system meets all technical requirements and is in functional condition. 9. Inspection Inspections and functional demonstrations are possible by prior appointment. Qualified interested parties will be provided with further technical documents, drawings and photo documentation upon request. If you have any questions or require further information, please send us a message or call us.

Condition: excellent (used), Year of construction: 2022, operating hours: 326 h, functionality: fully functional, machine/vehicle number: A20221005, feed length X-axis: 5,500 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 100 mm, feed rate X-axis: 3 m/min, workpiece weight (max.): 500 kg, working width: 1,300 mm, type of input current: AC, volume flow: 12,000 m³/h, suction capacity: 6,000 m³/h, compressed air connection: 6 bar, A fully automatic coating system in excellent condition is offered for sale, consisting of the following components: 1 -----VEN SPRAY SMART Spray System----- Year of manufacture: 2019 Feed speed: 1.5-4.0 m/min Bjdpjzcmy Uefx Afwodg Working speed: 2.0 m/min Working height: 920 ± 20 mm Working width: 1,300 mm Min. workpiece size: 300x100x10 mm Max. workpiece size: 3,600x1,200x50 mm Coating material: Water-based paints, solvent-based paints Spray process: Air, Airmix, Airless 326 operating hours 2-----VEN MOVE TRANSFER----- Type: VEN MOVE TRANSFER 180° Year of manufacture: 2022 Length: approx. 6000 mm Width: approx. 8,078 mm Speed: 3.2 m/min Max. load: 20 kg/m 766 operating hours 3 -----VEN TRANS BELT (x3)----- Type: VEN TRANS BELT belt conveyor Year of manufacture: 2022 Length: approx. 5,635 mm Outer width: approx. 1,511 mm Working width: approx. 1,300 mm Conveyor speed: 3.0 m/min Max. load: 20 kg/m 766 operating hours 4 -----VEN TRANS BELT with dust protection hood----- Type: VEN TRANS BELT belt conveyor Year of manufacture: 2022 Length: approx. 3,800 mm Working width: approx. 1,300 mm Working height: 920 ± 20 mm Conveyor speed: 3.0 m/min Max. load: 20 kg/m 5 -----VEN MOVE TRANSFER with drying chamber----- Type: VEN MOVE TRANSFER with drying chamber Year of manufacture: 2022 Length: approx. 6,000 mm Width: approx. 8,078 mm Conveyor speed: 3.0 m/min Max. load: 20 kg/m Drying chamber: Manufacturer: Adolph & Co GmbH Min. exhaust air volume: 1,200 m³/h 6 -----Supply air unit HC12----- Manufacturer: Berliner Luft Recirculation air volume flow: max. 12,000 m³/h Max. heating temperature / heating capacity: 70°C / 174.14 kW 1620 operating hours -----Technical Features----- - Fully automatic coating process - Multi-layer coating programmable - Automatic control of the entire coating process - 6 freely programmable spray guns - Suitable for water-based and solvent-based paints - Suitable for automated coating processes in industrial applications The system was installed in 2022 and was in operation for only about 1 year (326 operating hours in the spray gun drive). It is in very good condition, is fully documented and is ideal for industrial coating processes with high quality requirements. The original investment value in 2022 was approximately €760,000. The selling price is negotiable.

Condition: excellent (used), Year of construction: 2012, operating hours: 350 h, functionality: fully functional, machine/vehicle number: R-3176, overall weight: 5,500 kg, total width: 1,400 mm, total length: 7,000 mm, temperature: 200 °C, power: 6 kW (8.16 HP), type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, For sale is a Binder DRYON DRVF 1400×7 fluidized bed/vibrating dryer for wood chips, compost, biomass, wood shavings, and comparable bulk materials. Bdsdpfxszg Dx Ue Afwog The system was used exclusively for testing purposes and has only approximately 300–400 operating hours. It is in good condition and fully functional. Key data: (The system has previously been used for steam drying with superheated steam at approximately 200 °C. Conversion to other drying media, such as air or flue gas, is possible in principle with appropriate modifications.) - Dryer width: approx. 1,400 mm - Overall length: approx. 7,000 mm - Input capacity: approx. 2,000 kg/h wet (designed for green waste) - Output capacity: approx. 1,200 kg/h dry (designed for green waste) - Water evaporation: approx. 667 kg/h (designed for green waste) - Output moisture content: ≤ 10% (designed for green waste) - Installed electrical power: approx. 6 kW - Weight: approx. 5,500 kg Upon request, additional components for a complete drying unit can be purchased. These include a filter system, a high-performance radial fan, and the associated drive motor. (see planning drawing) Filter system: NESTRO Lufttechnik GmbH, Type Jet 9525, year of manufacture 2013, factory number FA169096, filter area 282.6 m², max. compressed air 6.0 bar, category EK004182, weight approx. 8,000 kg. Fan / drive motor: High-performance radial fan Type HRV28-450 with drive motor VEM motors GmbH, Type IE2-W21R 315MX2, year of manufacture 02/2013, motor number 180022/0001 H, power 160 kW / 218 HP, voltage 400 V, current 274 A, speed 2,973 min⁻¹, frequency 50 Hz, protection class IP55, insulation class 155, weight approx. 955 kg.

Condition: used, Plant for the conditioned milling of malt into grist and for the subsequent storage of the grist. In a conditioning screw conveyor, the malt is moistened with water at 60°C before being ground into grist in the 6-roll mill (Künzel, 1966). The conditioning water is pre-treated in a water treatment system (Täuber, 2019). The grist is collected in a funnel-shaped grist hopper mounted on legs and fed into the grist transport system. Additional title: 6-roll mill for conditioned dry grinding; built between 1966 and 2019 Capacity: 1200 kg/h Bdsdpfx Asziy U Defwsg Features: 6-roll mill; conditioning screw; water treatment

Condition: used, CIP system comprising a total of 7 tanks, of which: - 1 tank with a capacity of 60 hl, used as a buffer water tank - 5 tanks, each with a capacity of 30 hl (built in 1992), for acid, buffer water, Desi and 2 x lye - 1 tank with a capacity of 20 hl (built in 1992) for fresh water Other system components: - 2 centrifugal pumps - Heat exchanger - Conductivity measurement - Various pipework and valves Additional title: 7-tank CIP system with pumps and heat exchanger Bjdpfozi Anaex Afwodg Volume stacked water tank: 6000 l Volume 5 x tanks for cleaning solutions: 3000 l Volume fresh water tank: 2000 l Material: stainless steel Position: vertical vessels each on 3 feet Features: 7 x CIP tanks (comprising 1 x 60 hl, 5 x 30 hl and 1 x 20 hl); 2 x centrifugal pumps; heat exchanger; conductivity measurement; various pipework and valves

Condition: like new (used), Year of construction: 2021, functionality: unexamined, power: 140 kW (190.35 HP), nominal power: 140 kW (190.35 HP), As-new Combined Heat and Power Plants – 2× WOLF Power Systems – 140 kW electric each – unused For sale are two as-new combined heat and power (CHP) plants from WOLF Power Systems, each with an electrical output of 140 kW. The units have never been installed or commissioned and are therefore in technically unused condition. Since delivery approximately five years ago, they have been stored dry and protected. Technical specifications: Manufacturer: WOLF Power Systems Electrical output: 140 kW per unit Condition: unused / as new Storage: dry, professionally stored Availability: immediate The current purchase price is approximately €220,000 net per unit. This is a rare opportunity to acquire high-quality CHP technology well below new price – ideal for commercial, district heating projects, agriculture, or energy contracting. Bjdpfoyt Emnsx Afwjdg Inspection possible by appointment. Asking price is half of new price, please submit your offer!

Condition: used, Ex-protected filter unit, extraction system, central extraction cartridge - impulse filter P. RIES GmbH Type 330 D ATEX Cartridge filter system, rectangular filter unit, central welding fume extraction Machine no. 10011932 Year of manufacture: 2020 - as new, unused Airflow rate: 3,300 m³/h Airflow rate: 0.9 m³/sec Filter area: 20 m² (1 piece cartridge filter) Differential pressure: 3,300 Pa (33 mbar) Extraction connection at filter inlet: 2x Ø 150 mm Exhaust connection at filter outlet: sound insulation hood Compressed air connection: approx. 8 bar Motor power: 3 kW Mains connection: 400 Volt, 50 Hz - Explosion-protected design ATEX II 2Db 125°C / 3G T4 - Pneumatic rotating filter cleaning, manual via push button - Manometer for differential pressure display (vacuum display in mbar) - Service door for filter replacement - Filter stage 1 = 1 cartridge filter Ø 325 mm, length 900 mm P-RIES, type cartridge filter 20.1 m², BGIA/IFA class M, antistatic - Filter stage 2 = filter outlet (sound insulation hood) equipped with 9 activated carbon filter cartridges, type AKZ 2500V, 266 m³/h per filter cartridge - Built-in radial fan, type IE 3-premium efficiency, 12% improved efficiency - Robust steel construction in RAL 7035 light grey, antistatic powder-coated - Dirt collection container as pull-out drawer approx. 70 litres (440 x 530 x 300 mm) - EC Declaration of Conformity, operating instructions with wiring diagram available Required space (L x W x H): 670 x 700 x 2430 mm Bdedpjy N Duqsfx Afwsg Weight extraction unit: 211 kg Transport dimensions on pallet (L x W x H): 930 x 1350 x 1950 mm Weight incl. transport pallet: 236 kg As new, unused, ex stock

Condition: new, functionality: fully functional, power: 340 kW (462.27 HP), fuel type: electric, color: other, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO MCK-90 is a middle model of MCK series, those are a mobile type & closed circuit crushing and screening plants that is used for processing of hard materials such as basalt, granite, gabbro, dolomite and other types of hard stones. MCK-90 includes two stages of crushing process which is made by primary jaw crusher and Secondary impact crusher. TECHNICAL SPECIFICATIONS: - Bunker: 20 m3 - Plant Dimensions (1st chassis): 11500x4600x4200 mm - Second chassis: 15500x4650x4400 mm - Production Capacity: 100-180 Tons Per Hour - 1st Crusher: Jaw Crusher – 900x650 mm - 2nd Crusher: Secondary Impact Crusher – 1120x1250 mm - Maximum Feeding Size: 600 mm - Vibrating Screen Size and Deck: 1700x4500mm 3-4 decks - Total Motor Power: 340 Kw - Generator (optional): 450 kvA MCK-90 IS A COMBINATION OF: • Bunker(Hopper) • Vibrating Grizzly Feeder(bypass) • Primary Jaw Crusher • Secondary Impact Crusher • High Stroke Type Vibrating Screen • Folding type feeding, feedback, bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Dust Suppression System • Easy walking platforms for maintenance • Diesel Generator (Optional) Bjdey Db T Topfx Afwedg FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, For sale: a used CHP unit with few operating hours, hardly used. Bjdpfx Afszcwhvswedg Natural gas. Details: see nameplates.

Condition: new, functionality: fully functional, power: 377 kW (512.58 HP), fuel type: electric, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE New Generation FULLSTAR Series Mobile Crushing, Screening and Washing Plants are the most preferred machines in recent years thanks to easy and cost free installation. The first crushing process is performed with Primery Jaw Crusher, we can design with secondary impact crusher or cone crusher for second crushing stage according to the requirements of our customers. Fullstar-60 plant has been projected for the first time in the world by Fabo and provides crushing, screening and as well as to wash 0-5 mm sand at the same time on a single chassis. Our FULLSTAR model operates in closed Crushing circuit system and allows user to obtain 4 different final fractions up to 300 T / S capacity. We are manufacturing Fullstar-90 and 110 models which has 3 functions at the same time by trailed-type 2 chassis with its own tires. FABO FULLSTAR-90 is a mobile type plant which perform crushing, washing and screening operations at the same time. This type of plant is very efficient as it is produced on a single chassis, which reduces both plant operation area and manufacture cost. TECHNICAL SPECIFICATIONS: - Model: Fullstar-90 - Production Capacity: 120-180 Tons Per Hour - 1st Crusher: Primary Jaw Crusher – 900x650mm - 2nd Crusher: Secondary Impact Crusher – Rotor Ø1250x1000 mm - Maximum Feeding Size: 600 mm - Vibrating Screen Size and Deck: 1st Chassis: 1700x4500 mm : 2nd Chassis: 1550x4000 mm(Grizzly) ¬- Screw Washer Size: 600x5000 mm (Twins Helix) - Total Motor Power: 377 Kw - Generator (optional): 450 kvA - Plant Dimensions: 1st Chassis: 18960 x 4070 x 4650mm Bsdpfjzvfk Djx Afwodg : 2nd Chassis: 15500 x 4650 x 4400mm FULLSTAR-90 IS A COMBINATION OF: • Bunker(Hopper) • Vibrating Grizzly Feeder(Bypass) • Primary Jaw Crusher • Secondary Impact Crusher • High Stroke Type Vibrating Screen • Screw Sand Washer (Single Helix) • Folding type feeding, feedback, bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Dust Suppression System • Easy walking platforms for maintenance • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Year of construction: 2023, operating hours: 500 h, condition: like new (used), number of feeding trays: 2, Scope of supply of the system The offer includes: 1. Mixer • Concrete mixer with a capacity of 9 m³. • Mixer screw inside the mixer has been renewed and reinforced. • The mixer is driven by a powerful electric motor. • The mixer is mounted on four load cells (each with a load capacity of 20 t) for precise weighing of the materials to be mixed. Bodpfjzmyvijx Afwsdg 2. Trough screw conveyor 1 • Conveying system for feeding the mixer. 3. Trough screw conveyor 2 • Conveying system for discharging the finished mixed material. 4. Liquid feed • Dosing of liquid components via a pumping system from Flux. 5. Electronic control • Electronic control with a mobile operating unit for weighing and dosing based on the weight increase of the material in the mixer. Mode of operation • The mixer is installed on load cells. The current material weight is displayed on the display at all times. • For example, if a total mixture of 4,500 kg is to be produced, this can be dosed precisely according to a predefined mixing ratio, e.g. 80% main material (3,600 kg), 10% additive (450 kg), 7% additive (315 kg) and 3% additive (135 kg). • The smaller additives are pre-weighed and fed into trough screw conveyor 1 via the additive hopper using a travelling carriage from big bags. • Subsequently, the main material is conveyed into the mixer via trough screw conveyor 1 until the desired total weight of 4,500 kg is reached. • After that, the feed is stopped via the trough screw conveyor. • The mixing process then takes place according to the requirements. In our application, the mixing time was approximately 20 minutes. • After the mixing process is complete, the material is discharged via trough screw conveyor 2. To do this, the direction of rotation of the drive motor is switched at the control panel and the discharge screw conveyor is switched on. • The finished mixture can then be filled directly into containers or loaded into transport vehicles (in our case, a push-off trailer or manure spreader). Mixing process based on weight percentages 1. The main material is fed into the trough screw conveyor via the large stainless steel hopper, which then conveys the material into the mixer. In our case, this consisted of solid components from biogas waste. 2. Additional components can be added directly from big bags onto the main material using a second stainless steel hopper and a traverse. This ensures pre-mixing during the conveying process. In our application, biochar and bentonite were added. 3. Liquid components are sprayed directly into the mixer. In our case, we used EMa (activated effective microorganisms) for this purpose. Optionally, the push-off trailer/manure spreader can be purchased.

Condition: good (used), Manufacturer: Knoll Year of construction: 2008 Bdsdezqy Hvjpfx Afwog Type: HL 250/1400 Equipment number: 368355 High-pressure pumps: 2 x………….. bar Tank capacity: 1,000 l Equipment: Knoll belt filter Note: The system was used on an index rotary machine. In this process, the coolant was pumped from the machine into the tank using a lift pump and then cleaned and pumped back to the machine using high-pressure pumps. The system has its own Siemens PLC with operator panel. Connection: 13.47 kW Weight: Dimensions: 1,500 x 1,800 x 2,400 mm

Condition: used, Year of construction: 2010, “Cleaning in Place” (CIP) system, consisting of the following components: - 400-liter stainless steel tank serving as a hydrostatic circulation tank - 7.5-kW feed pump (Packo) for pumping 25 m³/h against 4.1 bar - 4.0 kW return pump (Packo) for pumping 25 m³/h against 2.0 bar - Shell-and-tube heat exchanger (Weinbrenner) for heating a flow rate of 25 m³/h from 55 °C to 75 °C with 790 kW - 4-channel chemical dosing system (ProMinent) for lye, acid, disinfectant, and additive - Temperature measurement - Conductivity measurement (E+H) - Inductive flow meter (E+H) - Control cabinet with touchscreen display - Various piping and valves Additional title: Cleaning system for cleaning pressurised tank cellars Volume circulation tank: 400 l Length: 2,5 m Width: 3,0 m Height: 2,9 m Operation / Control: Simatic S7 Bsdpfxoztwu As Afwedg Material: contact surfaces from stainless steel Position: on stainless steel frame with feet Features: Circulation tank; 2 centrifugal pumps; shell-and-tube heat exchanger; 4-channel chemical dosing system; control cabinet with touch panel; flow measurement; conductivity measurement; temperature measurement; various pipes and valves

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 844, PLEASE READ THE DESCRIPTION CAREFULLY Used IPF25 filling machine with integrated weigher for filling paper open-mouth bags, including bags with handles. The machine is suitable for processing a variety of bulk products, such as: Cat litter Pet food Charcoal Bdsdpezrvldjfx Afwsg Wood pellets Other dry bulk materials .... Bag dimensions: Width: 150 to 300 mm Length: 300 to 600 mm Side gusset: 35 to 85 mm The machine is currently in our workshop and is undergoing refurbishment. The refurbishment work will be carried out in stages. If you are seriously interested, we can expedite this process so that the machine becomes available sooner. Please feel free to contact us for additional information or to arrange a viewing.

Condition: new, Year of construction: 2015, Storage location number: 100636087 Transport dimensions (L x W x H): 0 x 0 x 0 Bdjdpfszkz Rpjx Afwog

Condition: excellent (used), functionality: fully functional, ELMAG SER-FC-CS45 painting line for joinery 1. Automatic transport system with: – Trolleys: 40 units – Max. permissible total weight: 6000 kg – Trolley length: 3000 mm – Feeding system: automatic – Trolley rotation: automatic 2. Painting booth: – Dimensions: 4080 x 2000 x 4000 – Power: 4 kW – Flow rate: 14,000 m3/h 3. Flow coating system: – Length: 4000 mm – Valve height: 4500 mm – Usable working height: 2500 mm – Pump flow rate: 500 l/min Bodpfxozk Epcj Afwjdg – Valve construction: stainless steel – Capacity of the paint valve: 200 l 4. Drying chamber: – Dimensions: 13,000 x 2900 x 4100 5. Air purification system (inlet + recirculation filters): – Air flow: 7000 m3/h – Painting line compressor – Air purification system (inlet and recirculation filters) Air flow: 15,000 m3/h – Thermal power: 110,000 kcal/h

Condition: excellent (used), Numerical Control Power Control + Software Cadmatic 4 Professional No. 1 Infeed roller tracks (ca.) 32,000 mm Lifting table (mm) 5600 x 2200 VAC loader (sliding bridge) with fan suction for loading special or delicate panels 1° Rear-pusher, with No. 6 clamps/grippers Turning device (rotating unit) at 90° 1° Panel Saw - Max cutting width mm 5600 (cutting line with air cushion) Bdsdpfovnq H Eox Afwjg Max blade projection (mm) 190 Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 600 ( Kw 36) Adjustable speed of the saw carriage (QS) (m/min) 1 - 130 m/min 2° Rear-pusher, with No. 14 clamps/grippers 2° Panel Saw - Max cutting width mm 2200 (cutting line with air cushion) Max blade projection (mm) 190 Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 600 (Kw 36) Adjustable speed of the saw carriage (QS) (m/min) 1 - 130 m/min Waste evacuation system with grinder (Kw 19.5) No. 2 Front supporting tables with Air blowing system (mm 800 x 2160) Plastic wheels coated with special material to avoid scratching delicate panels Automatic unloading System of the cut panels: N° 2 x Liftomat HAU-A 25/12 Automatic Stacking System with 8 stations