Used Servatechnik 3X Compressors for sale (4,864)

Condition: ready for operation (used), Year of construction: 1996, operating hours: 5,387 h, functionality: fully functional, overall weight: 191 kg, total length: 1,500 mm, The machine was a backup unit intended to ensure uninterrupted operation, but its capacity is now too small for our needs, so we are selling it. We’ve only turned it on occasionally over the past 10 years or so. It can be tested on-site. Isdpfx Asy Ncn Aon Hjif

Year of construction: 2008, condition: ready for operation (used), Max. operational pressure: 11bar, motor rotational speed: 2945/min, nominal power: 30kW, operational hours counter: 67,685h. Iisdpfjl Dxmfjx An Hsf

Year of construction: 2002, condition: ready for operation (used), Two compressors Kaeser are available. 1) Kaeser CSD 102 T SFC, year of manufacture: 2002, rated power: 55kW, max. operating pressure: 8.5bar, refrigerant: R134a, refrigerant quantity: 3.1kg, operating hours: approx. 132150h, load hours: approx. 129858h. 2) Kaeser BS 61, year of manufacture: 2001, rated power: 31kW, max. operating pressure: 8bar, operating hours: 91889h, load hours: 78711h. Documentation available. An on-site inspection is possible. Iiedpjxph Nvefx An Hjf

Condition: excellent (used), Year of construction: 2004, Fini Cube 10- This is a compact 10HP industrial screw compressor. It can deliver max pressure of 10 bar with a 7.5KW electric motor. Iisdpszluihsfx An Hjf I was purchased in 2004 and was serviced on a yearly basis by the fully trained technicians of the local Fini agents. This compressor was used as a back up compressor to our Fini BSC 20 compressor so it was only used periodically to ensure it functionality when required. It come complete with an MTA air dryer.

Condition: refurbished (used), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 002332192500000472, overall weight: 211 kg, total length: 1,320 mm, total width: 850 mm, total height: 1,720 mm, power: 7.5 kW (10.20 HP), fuel type: electric, volume flow: 63 m³/h, pressure (max.): 10 bar, noise level: 67 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Following transport damage, completely refurbished with a new screw unit! Coaxial screw compressor with maintenance-free drive and maximum energy efficiency across all pressure ranges. The low compressor speed and the reduced load on the bearings of the patented direct drive enable very long service lives. Electronic EasyTRONIC Micro II control for reliability and efficiency. Prevents motor overload, reduces wear, and extends service life. Iodjzrnc Ijpfx An Hjif Monitors operating hours, temperature, and motor overload. Controls the direction of rotation of the motor via a phase sequence relay, thereby preventing potential damage during commissioning or after relocation. Optimized cooling system. Low-noise radial fan guarantees optimal operating temperatures even under unfavorable operating conditions. Thermostatically and electronically controlled fan and generously sized heat exchangers result in a longer service life and reduced fluctuations in oil temperature. User-friendly in every detail. Low noise, suitable for installation in any working environment. Small external dimensions, making transport and installation easy. Service-friendly due to optimal accessibility and easy disassembly and assembly of all components requiring maintenance. All air and oil pipes are made of heat-resistant rubber. Standard with star-delta circuit. Ready for connection with all fittings. Integrated desiccant dryer. Higher reliability of the compressed air system without costly downtime and production delays, while simultaneously ensuring product quality. Ready for use without any installation effort.

Condition: used, Year of construction: 2001, operating hours: 90,000 h, overall weight: 7,000 kg, power: 355 kW (482.67 HP), operating pressure: 10 bar, pressure (max.): 10 bar, type of cooling: water, Good working oil-free compressor, also suitable for spare parts (motor, airend, coolers) Iedjxbdppepfx An Heif

Condition: like new (used), Year of construction: 2016, operating hours: 46,000 h, functionality: fully functional, overall weight: 1,890 kg, motor manufacturer: garden denver, power: 75 kW (101.97 HP), fuel type: electric, volume flow: 684 m³/h, operating pressure: 10 bar, noise level: 75 dB, type of cooling: water, color: blue, Equipment: type plate available, Oil-free Screw Compressor Compair D75HRS 10A 75kw 10 bar 11.4m3/min with frequency converter COMPAIR D75HRS Screw Compressor fully serviced, for sale in excellent condition Iedpfew Nzrfex An Hjif oil-free design, direct drive, controlled by frequency converter. Regulated speed - air and water cooled 75kw power, air flow: 11.4 m3/min / 684m3/h Built-in frequency converter: Manufacturer: Compair D75HRS 10A Year of manufacture: 2016.11 hours: 46000 Drive power: 75Kw Pressure 10 bar Flow rate: 11.4/min Delco XL controller Main rotor speed: 2980 Voltage: 400v 50Hz 3 phase 85A Machine weight: 1890 kg Dimensions: 225 long 142 wide 205 high.

Condition: ready for operation (used), Year of construction: 2023, A mobile diesel screw compressor unit CompAir, suitable for construction site use, is available. Volume flow: 20m³/min, max. operating pressure: 24bar, motor power: 224kW, engine: Cummins QSB6.7, chassis: height-adjustable, fuel tank capacity: 350l. Machine dimensions: approx. 5500mm/2000mm/2700mm, weight: approx. 3500kg. Documentation available. An on-site inspection is possible. Iiedpfxjxu I Ddo An Hof

Condition: excellent (used), Year of construction: 2021, operating hours: 190 h, functionality: fully functional, Screw compressor Kaeser SX 3, year of manufacture 2021, operating hours under load: 190, 8.00 bar, SC2 400 V/50 Hz, effective delivery rate at 7.5 bar: 0.34 m³/min, rated power of the drive motor: 2.2 kW, dimensions W x D x H: 590 x 632 x 970 mm, weight: 140 kg, serial number: 1136-8192796, cyclone separator, manuals available. Iiodezd R R Sepfx An Hsf

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, cutting width (max.): 2,270 mm, insertion depth: 9,510 mm, insertion height: 120 mm, cutting length (max.): 3,200 mm, type of input current: three-phase, front table length: 3,200 mm, total width: 6,220 mm, input current: 32 A, total height: 2,000 mm, working width: 2,270 mm, total length: 11,510 mm, input voltage: 400 V, cutting height (max.): 110 mm, working height: 120 mm, input frequency: 50 Hz, Equipment: safety light barrier, The Zünd G3 XL-3200 is a professional digital cutting and routing machine with a working area of 2,270 x 3,200 mm and three module positions. The machine is suitable for both sheet and roll materials and features a conveyor for automatic material transport. The conveyor belt is in excellent condition. Maintenance performed by Zünd, last time on 17-08-2026. The material pass-through is 120 mm. With suitable tooling, materials up to 110 mm thick can be processed. This includes a POT Pneumatic Oscillating Tool with an 8 mm stroke and long 1.5 mm oscillating blades. This combination is suitable for cutting thick and soft materials. The machine features two UM-120 Universal Modules for various cutting, creasing, and marking tools, and an RM-120 routing module. The main tools are: UCT Universal Cutting Tool for standard blade cutting. PPT Passe-Partout Tool for 45° cuts. Iiodpfxozu Tcfj An Hsf POT Pneumatic Oscillating Tool for thick and soft materials, with blades up to 110 mm cutting depth. RM-120 Routing Module with a 1 kW high-frequency routing spindle and a 6 mm collet. Set of 6 mm milling cutters for, among other things, foam. This allows the machine to cut, oscillate cut, make 45° cuts, route, drill, and engrave. Automatic tool initialization (ITI) ensures the setting of cutting and routing tools. For material transport, the G3 is equipped with a conveyor belt, a 1,600 mm infeed extension, and a 3,200 mm outfeed extension. In addition, a transport beam, extra drive, and a passive roll-off unit are included. The roll unit can handle material rolls up to Ø350 mm and a maximum of 70 kg. A material guide roll reduces wrinkles and creases during infeed. To secure the material, the machine has a self-regulating vacuum turbine of 1-9 kW. The integrated ICC color camera handles the recognition of registration marks and supports, among other things, border recognition, best-fit, fit-to-object, and fit-to-job. This allows printed materials to also be cut accurately. The machine is controlled with Zünd Cut Center V3.x. The configuration includes Cut Server, Cut Manager, Cut Editor, Cut Queue, Routing Option, and Camera Option. Jobs can be processed automatically via hotfolders. A wireless barcode scanner allows for automatic loading of jobs from the queue. The complete machine configuration is approximately 9,510 x 4,220 mm. Approximately 11,510 x 6,220 mm of floor space is required. The minimum ceiling height is 3,000 mm; due to the guidance of the routing module, a minimum of 3,200 mm must be taken into account for this configuration. Technical connections: 3-phase 323-457 V, 50 Hz, minimum 32 A. 30 mA type B residual current device (RCD). Compressed air 0.8-1.0 MPa (8-10 bar). Compressed air capacity 400 l/min. Minimum floor load 200 kg/m². Industrial dust/chip extraction for routing work. Extraction capacity at least 3,150 l/min, 22-25 kPa, and Ø45 mm connection. In short: a fully equipped Zünd G3 XL-3200 with a cutting area of 2,270 x 3,200 mm, a material pass-through of 120 mm, and processing of materials up to 110 mm thick with suitable tools. The combination of UCT, PPT, POT, and 1 kW RM-120 allows the machine to cut and route a wide range of materials. The conveyor, automatic material feed, roll processing, camera recognition, and workflow automation make the machine suitable for both single pieces and automated production.

Condition: excellent (used), Year of construction: 2015, volume flow: 1.02 m³/h, pressure (min.): 14 bar, Screw compressor ALMIG FLEX 6 Variable speed (inverter) Iedpfx Anoyukiqo Hsif Motor: 5.5 kW Capacity: 1.02 m3/min Pressure: 14 bar Year of manufacture: 2010 Operating hours: 2400 h Net price: 9000,- Gross price: 11070,-

Condition: ready for operation (used), Year of construction: 2021, A mobile high-performance construction site compressor Atlas Copco for drilling applications is available. Design: tandem, volume flow: 28m³/min, max. operating pressure: 25bar, motor power: 368kW, engine: Scania DC13, fuel tank capacity: 600l, fuel consumption per hour at 75% and 100% load: 55l/77l. Machine dimensions X/Y/Z: approx. 6000mm/2100mm/2500mm, weight: approx. 7400kg, operating hours: approx. 650h. Including aftercooler, water separator, and PF filter. Documentation available. On-site inspection possible. Ijdpfx Aexu I A Tjn Hoif

Condition: good (used), Year of construction: 2021, Compressed air station: compressor FIRST AIR FAS 7-10 (No. S0058078, year of manufacture 2021, 7.5 kW, 10 bar), compressed air dryer KAESER TB 19 (No. 3731, year of manufacture 2008), compressed air tank (volume approx. 500 l, next inspection 02/2033). Iisdpfx Anjzh Ddae Hjf

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: API621725, For sale: Atlas COPCO ZR 132 compressor with filters, 125 KW Iisdpfewrm T Iex An Hsf

Year of construction: 2022, condition: ready for operation (used), A mint condition and oil-free Atlas Copco screw compressor system with hardly any operating hours is available. Volume flow at 1.9bar and 193kW: 67m³/h, max. pressure: 2.75bar, output: 200kW, outlet air temperature: 176°C, operating hours: 41h. Including electronics, sound enclosure and starter. Documentation available. On-site inspection is possible. Iisdpfx Ajv Tcq Ten Hsf

Condition: like new (used), Year of construction: 2019, functionality: fully functional, We offer a galvanized air receiver – 5000 liters. Manufacturer – OKS Otto Klein GmbH Iisdpfxjzt Icqo An Hsf Maximum working pressure – 11 bar Year of manufacture – 2019 Dimensions: Diameter – 1400 mm Height – 3570 mm Weight – 1050 kg Air receiver with data plate. Air receiver including fittings – overpressure valve, pressure gauge + flanges. Air receiver, air tank, pressure vessel.

Condition: used, Year of construction: 2012, operating hours: 64,000 h, functionality: limited functionality, machine/vehicle number: BA27450001, Gardner Denver VS40 screw compressor in good condition, well maintained. Currently disconnected and stored in a warehouse. Iodpjxxap Hjfx An Hsif

Condition: good (used), MANUF. CompAir MODEL L132-7.5A S/N 349021/0688 Year 2003 Iiodoyn Ef Tepfx An Hof Power (kW) 132 Output (m³/min) 20.4 Pressure (bar) 10

Condition: like new (used), Year of construction: 2020, operating hours: 14,660 h, functionality: fully functional, Kaeser SK22 Screw Compressor - Premium Iedpey Av Amjfx An Hoif 11 kW 11 bar 1.86 m³/min Year of manufacture: 2020 Operating hours: 14,660

Condition: like new (used), Compressor, rotary vane compressor, low-pressure gas compressor, gas compressor, Ro-Flo 19LE Manufacturer: Ro-Flo Compressors, LLC Type: 19LE Serial number: 10568-1 -suction pressure: -0.1 bar -maximum pressure: 3 bar -volumetric flow rate: 3,532 m³/h -operating speed: 275–640 rpm -maximum operating temperature: 176 °C -overall dimensions: 2000 × 700 × 900 mm Isdpfxeylcngo An Heif -weight: approx. 2,500 kg

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Sabroe SMC 112 L Reciprocating Refrigeration Compressor Brand: Sabroe Model: SMC 112 L Serial number: 164069 Year of manufacture: 2019 Rotational speed: 1500 rpm Iedpfxoyp H Hue An Heif Displacement: 848 m³/h Refrigerant: R717 (Ammonia) Compressor dimensions: 3350 mm x 1300 mm x 1520 mm Control cabinet: 500 mm x 410 mm x 2180 mm The Sabroe SMC 112 L is a high-performance industrial reciprocating compressor from 2019, designed for demanding refrigeration systems. The unit is configured to operate with the natural refrigerant R717 (ammonia), making it an energy-efficient and environmentally friendly solution. Thanks to its robust construction and high displacement capacity of 848 m³/h, this unit is ideal for large-scale food processing plants and cold storage facilities. The package includes a dedicated, free-standing control cabinet that provides complete control over operating parameters and ensures installation safety.

Condition: good (used), Year of construction: 2013, operating hours: 48,000 h, Screw compressor, Kaeser, Aircenter SX 4, compact all-in-one solution – used: Ijdpfxezbycte An Heif Price ex works: €4,500.00 (net)! Manufacturer: Kaeser Type: Aircenter SX 4 Year of manufacture: 2013 Rated power: 3.0 kW Motor speed: 2,910 rpm Max. operating overpressure: 8.0 bar Ambient temperature: 3°C / 45°C Compressed air tank: 200 liters Sound pressure level: 60–61 dB(A) Total weight: approx. 285 kg Dimensions (W x D x H): 590 x 1090 x 1560 mm Options: K1 (refrigerant dryer) / T2 (voltage supply/transformer) Operating hours: approx. 46,997 h (as of April 21, 2026) Condition: good Available: from approx. August 2026 Location: Leipzig

Condition: good (used), Year of construction: 2005, operating hours: 50,000 h, functionality: fully functional, overall weight: 850 kg, Equipment: refrigerant dryer, Screw compressor, 22 kW, with built-in refrigerated dryer; disassembled but in good condition. Isdszb Drxspfx An Hjif

Condition: good (used), Year of construction: 2014, functionality: fully functional, operating pressure: 10 bar, Compressor system consisting of: Screw compressor: Atlas Copco GA11VSD+ Refrigeration dryer: Atlas Copco FD70 Pressure accumulator Öwamat 4 Oil-injected screw compressor Iedpfx Anevu A Hdj Hsif with variable speed control Max. operating pressure: 10.0 bar Engine power: 11 kW Volume flow: 25.5-115.2 m³/h Control hours: 61,837 h Operating hours: 21,094 h Engine starts: 267,928 Load cycles: 315,576

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 23130745, total length: 3,500 mm, total width: 1,550 mm, total height: 2,570 mm, power: 1,351 kW (1,836.85 HP), fuel type: electric, volume flow: 2,239 m³/h, pressure (max.): 28 bar, Used Frick / York SGC 2313 - Sabroe SAB 233 S screw compressor skid for R717 (ammonia). Complete with a Schorch DQ7250S-PB83P-Z electric motor – 60 Hz – 110 kW – 3550 rpm with additional cooling, Sabroe OHU 07629 oil separator with a capacity of 1371 liters, Sabroe OF 2111 oil filter, Vahterus PSHE 3HH-66/2/1 Q-plate oil cooler, oil pump, and a Unisab 3 controller. The compressor has a displacement of 2239 m³/h. Capacity: 1351 kW at -6.7 °C/+35 °C. Iijdpjxyk Enofx An Hof