Used Shell Gripper for sale (1,390)

Condition: good (used), Year of construction: 2011, functionality: fully functional, Press force: 36 t Bending length: 1020 mm Distance between uprights: 932 mm Overhang: 150 mm Stroke: 120 mm Usable installation height: 295 mm Y-axis working speed: 10/25 mm/sec Y-axis rapid traverse: 220 mm/sec Working height: 1150 mm Machine weight approx.: 2,600 kg Space requirement approx.: 1805 x 1330 x 2380 mm TruBend 7036 Cell Edition Standard equipment: TruBend 7036 Cell Edition: - Electromechanical direct drive (torque motor) - Rear stop system with 6 axes and stop sensors - Positionable Wila tool clamping system - Control cabinet air conditioning BendMaster: - Stable base and manipulator - Load capacity 15 kg, max. sheet weight 3 kg - Floor-mounted track, welded construction with stable guide rail - Travel range 3215 mm Nwedpfx Agozwla Usksk - Gripper coupling on the BendMaster - Electric drives - Tongs with jaws LoadMaster Bend: - Handling system - Multi-suction device - Double sheet detection and singulation - Transfer system - System pallet Safety: - Protective enclosure with pivoting sliding doors Control: - PC control with 19" touchscreen - Mobile operating terminal - Network connection - Remote service via the Internet

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902024358, empty load weight: 6,149 kg, maximum load weight: 28,851 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 10/2018, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22.5", color: blue, #Chassis – haulage semi-trailer - Fine-grain steel welded construction, fifth wheel coupling plate with replaceable 2" kingpin - Slightly angled outer frame with "Load-Lock-Profil" for lashing strap attachment - 13 pairs of additional lashing rings recessed into the outer frame, 2.5 t each - 24 t two-speed landing legs, single-side operation, straight foot, without thrust compensation - Pull-out ladder at the rear - Side door retainers - Wheel chocks with holder - Pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm - Note: free support-leg corner dimension / rear swivel radius approx. 1930 mm - Galvanised steel rear underrun protection - Full-width rear mudflap - Half-shell mudguards with anti-spray flaps on the last axle only - Rear impact protection - "Blocker" – galvanised transverse steel angle, protecting against forklift damage and shielding the door hinges - 4 pairs of ferry lashing rings, marked yellow - Bolted pallet stop on both sides, approx. 15–20 mm high, reducing loading height by approx. 15–20 mm - Stainless steel storage box, W=600/H=400/D=500 mm, with polished lockable door #Rear wall / rear corner posts - Rear corner posts in steel up to roof edge, tarpaulin attachment with round tube and tensioning ratchet - Two-leaf rear portal doors, each with 2 internal rod locks #Tarpaulin - Tarpaulin with welded-in horizontal and vertical straps - Quick Lock System for side curtain with central locking, on the left (direction of travel) - Stainless steel tensioning locks on the right (direction of travel) - Customs cable running around the trailer with holder on the front wall (no customs seal, not combined with Quick Lock System) - Customer livery on side curtains and rear portal - Curtain with high-strength embedded spring steel strips, left side (direction of travel) – insertion battens on the left omitted as a result #Roof - Sliding roof, rear end-lift foldable, roof cover slides from rear to front, curtain colour: white - Eco lift roof, raised by approx. 380 mm on both sides, gas-strut assisted, optimum rain gutter at the rear, at the top of the rear bow above the doors #Paintwork - Frame: hot-dip galvanised incl. passivation - Landing legs: black coated - Front corner posts: galvanised and painted in front wall colour - Front wall: MB 5328 blue - Rear corner posts: galvanised and painted in rear wall colour - Rear wall: MB 5328 blue - Tarpaulin: RAL 5010 gentian blue - Pallet box lid: RAL 2011 deep orange Njdpfswyiw Eox Agkewk - Note: the images are archive photos; the vehicle may still be in use.

Condition: used, Year of construction: 2016, Overview Complete craft microbrewery around a 250-litre batch brewhouse - the Slowbeer 250, built in 2016 by Škrlj d.o.o. (Slovenia). The package covers the whole process from malt crushing to bottling - brewhouse, two 1,000 L fermenters, hot water tank, glycol chiller, 4-spout bottling unit and malt mill. All main units date from 2016 - a turnkey set for a brewpub or a start-up brewery. Technical data - Brand: Slowbeer - main units built by Škrlj d.o.o., Slovenia - Model: Slowbeer 250 - Škrlj COMPACT BREWHOUSE MINI 250 L (type BHM 250, 2.5 hl) - Year of manufacture: 2016 - Batch capacity: 250 L - Heating: thermal-oil jackets, electrically heated - 400 V, 50 Hz - Material: stainless steel AISI 304 (EN 1.4301), vessel and jackets - Fermentation capacity: 2 x 1,000 L (nominal) Scope of Delivery - Compact brewhouse | Škrlj (Slowbeer 250) | COMPACT BREWHOUSE MINI 250 L | 250 L per batch, thermal-oil heated, agitator with Bonfiglioli gear motor, Lowara CO350/03K/A wort pump (2019), Pedrollo NGA 1B thermal-oil pump, IPROS TP4001/15 plate heat exchanger, control cabinet with Omron frequency inverters | 2016 - Beer fermenters, 2 units | Škrlj | ZKG 1000 L | nominal 1,000 L each (1,230 L gross volume per vessel), AISI 304, atmospheric vessel 0-50 °C, water/glycol cooling jackets on shell and cone (3.0 bar operating, 6.0 bar test), sample valve, level indicator, CIP spray ball; recirculation pump with cleaning hoses plus one unused spare pump | 2016 - Hot water tank | Škrlj | 1200 L | AISI 304, electric heating 24.4 kW, 0-90 °C, CE 0531 | 2016 - Glycol chiller | MTA | TAEevo TECH 020 | 400 V / 3-ph / 50 Hz, 3.9 kW electrical input, refrigerant R410A, water circuit max. 6 bar, hose circuit for the fermenter jackets, digital temperature control | 2016 Nodpfszvqi Sox Agkewk - Gravity bottling unit | Mori-Tem | MODERNA B.4 A LE | 4 stainless steel filling spouts, Ebara JESX M5 feed pump, 230 V single-phase 50 Hz | 2016 - Malt roller mill | Egon Sommer Maschinenbau | PICCOLO 11 SB | 1.1 kW three-phase motor (230/400 V) | 2016 Transport dimensions (palletised, approx.) - Brewhouse: 2,400 x 1,200 x 2,200 mm, 660 kg - Fermenters (each): 2,700 x 1,100 x 1,245 mm, 240 kg - Hot water tank: 1,210 x 1,210 x 2,245 mm - Glycol chiller: 1,300 x 600 x 955 mm, 220 kg - Bottling unit: 1,000 x 700 x 1,650 mm, 180 kg - Malt mill: 800 x 600 x 1,200 mm, 90 kg Condition Used - very good to excellent overall condition. Brewhouse, fermenters and malt mill in excellent condition; chiller and bottling unit in good working order. The hot water tank is fully functional, with a light cosmetic dent on the top cover and normal limescale deposits inside. CE declarations and technical documentation are available for every unit except the malt mill, where the documentation is still being confirmed. Availability Immediately. Location: Spain. Dismantling and loading by arrangement.

Condition: good (used), Year of construction: 2003, functionality: fully functional, controller model: Basis Bosch Typ 3, Standard equipment: Machine - Working area 2500 x 1250 mm - Rotatable tool holder - Automatic repositioning with clamping device - Automatic tool changer with 19 stations - 2 clamping jaws - Programmable clamping device with pre-selectable - Clamping force - Dividing slide 200x200 mm - Part sorting into 2 containers - 2 good part containers - Ball tables - Tool spray lubrication - Punch scrap extraction - Scrap container - Quick shut-off for hydraulics - 10.4" TFT color screen - 3.5" floppy disk drive - Graphics programming ToPs 2000 - ToPs 2000 - Software package for PC (CD-ROM) - Safety light curtain, 2-beam Njdpfozv Txpsx Agkowk - RJ45 network connection - Network connection including installation Extended machine equipment - Multitool function - Thread forming function - Marking/fast beading function - Roller tool function - Vibration-damped installation Automation - Loading and unloading device - Extended pull-out for raw material trolley - and unloading platform - Manually movable raw material trolleys - Scrap extraction system - Stop system with spread magnet - Sheet metal thickness gauge - Suction frame for loading - Gripper for unloading

Condition: used, Year of construction: 2015, functionality: fully functional, load capacity: 20 kg, arm reach: 1,200 mm, controller manufacturer: Siemens, teach pendant manufacturer: Siemens, Offered is a delta robot including frame and enclosure from Autonox. The robot was used as a trade fair exhibit. Fully functional including accessories. 1. Delta robot RL3-TS1-1200-20kg 2. Reach: 1200 mm 3. Payload: 20 kg 4. Including drive technology from Siemens 5. Including Siemens operator device 6. Including control cabinet 7. Including stainless steel frame 8. Including gripper Nedpfexdnkvex Agkjwk Video of the trade fair application: youtube.com/shorts/mQa4nFcTp84?feature=share Price negotiable Inspection possible in 45659 Recklinghausen.

Condition: used, mileage: 785,762 km, power: 132 kW (179.47 HP), first registration: 07/2013, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 09/2026, gearing type: automatic, emission class: euro5, number of seats: 2, total length: 7,350 mm, total width: 2,550 mm, total height: 3,610 mm, Equipment: ABS, air conditioning, had accident, soot filter, tail-lift, MAN TGL 8.180 Refrigerated Box Truck ThermoKing V500 1st Owner Workshop Maintained The vehicle has an error message: transmission control fault, but is ready to drive. Standard Equipment: - MAN 8.180 refrigerated box - Cruise control (speed regulator) - 6-speed gearbox – Type: ZF 6 AS 800 OD, Tipmatic - Automatic climate control - Rear plastic fenders (full shell) - Roof air deflector - Side underrun protection - Seat cover/upholstery: comfort quality - Exterior sun visor - Front underrun protection - Central locking - Additional high beam/fog lights - Axle configuration: 4x2 - Curb/forward view mirror - Anti-lock braking system (ABS) - Safety belt indicator, left - On-board computer MAN-Tronic - Front compressed air coupling - Electronic braking system MAN-Brakematic - EURO 5 engine - Cab type: C (Compact) - Suspension: leaf spring - Tinted windshield - Alternator 28 V 80 A - Rear axle HY-0718 Body/Construction: - Chassis - Heated fuel filter - 100-liter plastic fuel tank - Adjustable steering column (steering wheel) - Raised air intake, dry air filter lower right - Engine 4.6 L – 132 kW Diesel (D 0834) - Engine brake - Wheelbase 3,900 mm - Spare wheel holder behind rear axle - Disc brakes, rear axle - Disc brakes, front axle - Front mud flaps - Tinted side windows - Rear axle stabilizer - Plastic bumper - Tinted door windows - Rear underrun protection - Viscous fan - Front axle VOK-05 offset - Gross vehicle weight: 8.00 t Special Equipment: - End cross member - Trailer coupling: Ringfeder 4040 G 145A - 12V/24V trailer socket - Trailer socket with ABS - Car phone antenna - Audio system: MAN CD radio 24V - Pre-wiring for radio 24V Nsdpfxoy Ng A Dj Agkewk - Electrically adjustable and heated exterior mirrors - Wide-angle, electrically adjustable and heated left exterior mirror - Wide-angle, electrically adjustable and heated right exterior mirror - 155 Ah battery - Right-side kerb/side mirror, electrically adjustable and heated - 2-line brake connector at rear chassis - Entry lighting, driver/passenger side - Electric windows - Flame start system - etc. Appointments and test drives by telephone arrangement. All information provided online is a non-binding description and does not constitute guaranteed characteristics. The seller is not liable for typing or data transmission errors. Subject to prior sale and errors.

Year of construction: 2012, condition: used, max. wheel diameter 180 mm gear width ca. 220 mm max. module 3 / 5 mm Control Siemens 840D sl max. radial velocity 5000 mm/min max. workpiece diameter 180 mm table rotation speed 800 U/min table diameter 145 mm axial travel 250 mm mm axial travel 300 mm clamping force max. 13 kN swivelable +/- 45 ° drive capacity 23 kW turning speeds 6000 U/min diameter of tools max. 90 mm tool clamping length max. 211 mm module hobbing max. 3 module profile milling max. 5 tangential speed max. 7500 mm/min weight of the machine ca. 9,5 t dimensions of the machine ca. 4,5 x 3,5 x 2,7 m Equipment / Accessories: - The machine is equipped for dry milling. Nsdpfx Agoymf Daskewk - workpiece magazine - parallel gripper: - workpiece weight form-fit max. 15 kg - workpiece length max. 400 mm

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33901011222, empty load weight: 5,741 kg, maximum load weight: 33,259 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2022, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 3,345 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 60 %, color: red, Gross/technical aggregate load: 24000 / 27000 kg Stated kingpin load perm./techn.: 11000 / 12000 kg Overall length approx.: 13850 mm Overall width max.: 2550 mm Overall height approx.: 3345 mm Platform length approx.: 13650 mm Platform width approx.: 2480 mm Fifth-wheel height approx.: 950 mm Kingpin setting dimension approx.: 1680 mm Front corner dimension approx.: 2040 mm #Chassis - semi-trailer for haulage Njdpfxjzv Sq Rs Agkewk Fine-grain steel welded construction, kingpin plate with replaceable 2" kingpin Outer frame slightly angled with "Load-Lock-Profil" for lashing strap attachment (note: side boards must be opened to hook in the straps) "patentiertes Load-Lock-Cross" for lashing strap attachment, in the cross member beneath the outer frame 24 t 2-speed landing legs, single-side operation, straight foot, without shock absorber (rear swivel clearance approx. 1930 mm) Pull-out ladder at the rear 2 wheel chocks with holder Side underrun protection, aluminium Pallet box for 8 Euro pallets Front underrun protection, galvanised steel Quarter-shell mudguards ahead of axle 1 and behind each axle, with anti-spray flaps behind each axle 2 plastic tool boxes Container locks, 4 pairs recessed in the floor for 2 x 20 ft containers, distance between locks approx. 600 mm total, retractable type, without adapter, extendable to locking dimensions of 2760 mm and 2820 mm 2 rows of lashing/stake rails along the longitudinal beams, recessed centrally in the floor 7 lashing/stake rails transverse, recessed in the floor across the full width to the outer frame #Axles & Suspension SAF disc brake axles Laser-aligned axles/chassis to reduce tyre wear and fuel consumption Air suspension #Braking System Two-line air braking system, colour-coded pipework for easy servicing Spring-actuated parking brake 2 mismatch-proof coupling heads at the front EBS electronic braking system with EBS socket at the front Lift-and-lower valve Vehicle stability system #Electrics 24V multi-chamber lights, yellow LED side marker lights 2 x 7-pin mismatch-proof sockets at the front 2 additional LED work lamps 2 pairs of warning boards, double LED-illuminated, extendable to 3000 mm #Floor Phenolic-faced plywood flooring approx. 30 mm thick, on longitudinal sub-beams for high point load capacity, forklift axle load up to max. 7100 kg #Headboard / Front Corner Posts Hangler steel headboard approx. 2600 mm high, additionally lined inside with phenolic-faced plywood over the full height #Paintwork Frame hot-dip galvanised incl. passivation + outer frame top-coated in RAL 3000 fire red, 15-year warranty against corrosion perforation #Note The images are archive photos; the vehicle may currently be in use

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, machine/vehicle number: Div, 1 set of load beams, trunnions, hooks, grippers, and load beams including 3 heavy-duty roller carriages/transport wagons, 250x80cm various manufacturers such as Tiger, DoLast, Tigrip, etc. Only sold as a complete set! Very good condition, see pictures. Item location is 75053 Gondelsheim. Nwedpjzv H I Djfx Agkjk See pictures. Shipping via freight forwarder or collection only by prior appointment.

Condition: excellent (used), functionality: fully functional, Year of construction: 1998, machine/vehicle number: DN1771/1789/1791, 1x Abus VS column-mounted slewing crane, capacity 500 KG There are 3 identical cranes available. Load capacity at full outreach: 500 KG / 0.5 tons Height: approx. 3.6m Upper carriage outreach: approx. 3.42m Outreach: approx. 2.5m Hook height: approx. 3m Total weight: approx. 350 Kg Includes Abus chain hoist with floor control (2 lifting speeds) with slewing and trolley drive Connection to 400V 16A, slewing range 360° Crane is disassembled and immediately available. The gripper is not included! Item location is 75053 Gondelsheim. Nodjzv Hy Tjpfx Agkjwk Only the crane system shown in the pictures is being sold. Very good condition, see pictures. Shipping via freight forwarder or collection by arrangement.

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, machine/vehicle number: DN175501, 1x Abus VS column-mounted swivel crane, NL 500 KG Load capacity at full extension: 500 KG / 0.5 tonnes Height: approx. 4 m (including base: 0.35 m) Outrigger length: approx. 3.7 m Reach: approx. 3.5 m Hook height: approx. 3.3 m Total weight: approx. 450 kg Including Abus chain hoist with floor control (2 lifting speeds) with swivel and trolley drive Connection to 400V, 16A, swivel range 360° Crane is disassembled and immediately available The gripper is not included! Item location: 75053 Gondelsheim Nedpfszv Hytex Agkewk Only the crane system shown in the pictures is sold. Very good condition, see pictures Shipping by freight forwarder or collection by appointment.

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: DN1741, Technical specifications: IHF - Quick Lift QLA 75-S-GM manipulator, handling device, lifting aid Load capacity at full reach: 75 kg, at the gripper: 25 kg Overall height: approx. 3.1 m Reach: approx. 2 + 2 m Lifting height: approx. 0.2 - 1.4 m Total weight: approx. 400 kg Swivel range: 270° + 90° (via articulated arm), connection to 400V 16A With a pneumatic magnetic gripper (16 magnets), you can pick up or position steel workpieces, thereby automating your process. The crane is dismantled and immediately available. Njdpfjzv Hxpjx Agkjwk The item is located in 75053 Gondelsheim. Other cranes are available, with load capacities of 80-5000 kg; please inquire. See pictures. Shipping via freight forwarder or collection by appointment only.

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: DN1729, Technical data: Nwjdpezv Hw Ejfx Agkok IHF - Ingersoll Rand - Quick Lift QLA 75-S-GM manipulator handling device, lifting aid Payload at full extension 75 kg, at the gripper 25 kg Overall height approx. 3.1 m Reach: approx. 2 + 2 m Lifting height: approx. 0.2 - 1.4 m Total weight approx. 400 kg Swivel range 270° + 90° (via articulated arm), connection to 400V 16A With a pneumatic magnetic gripper (16 magnets), you can pick up or position steel workpieces, thereby automating your process. The crane is disassembled and immediately available. The item is located in 75053 Gondelsheim. Other cranes are available, with load capacities from 80 to 5000 kg; please inquire. See pictures. Shipping by freight forwarder or collection only by prior arrangement.

Condition: used, Year of construction: 2011, Used Equipment Year of Manufacture: 2011 Condition: Currently installed Equipment and Technical Data: -Filter housing base ring NFHSU 9/9 with discharge chute for press - Discharge: 1.1 kW - Storage volume in the base ring approx.: 3.25 m³ Nwjdpfxszvz Tbs Agkjk - Dimensions L x W x H (incl. base ring) 2440 x 2440 x 900 mm - Ground clearance: 350 mm - Conveyor screw for briquetting press 0.75 kW - Extension and expansion rings are optional; max. storage volume approx. 12 m³ - Extension and injection ring NFHSU for 9/9 and 10/10 Jet, L x W x H: 2480 x 2480 x 500 mm - Expansion ring for NFHSU 9/9, 2480x2480x700 mm, with inspection door and type-tested explosion flap - Filter for filter housing NFHSU 9/9/20, filter area 116 m²: The Nestro filter system NFHSU is a solid filter construction made of 4 mm galvanized steel sheet and is designed for outdoor installation and weather resistance. This filter system is particularly robust and designed for underpressure operation up to -3,500 Pa. The filter system is equipped with upper and lower inspection doors 600 x 600 mm, with automatic filter regeneration, dry extinguishing system, differential pressure switch / volumetric flow monitoring and the necessary explosion protection. Note: Filter is equipped with high-quality filter material, BIA category M, antistatic, residual dust content < 0.1 mg/m³ and suitable for return air operation. Further technical data: - Filter tube length: 2,000 mm - Filter tube diameter: 230 mm - Number of filter tubes: 81 - Filter area: 116.0 m² - Filter regeneration: automatic/motorized - Number of vibrating motors: 4 pcs - Fan shroud for NFHSU 9/9 including inspection door - Fan US-FHN (clean gas) 22 kW 16,400 m³/h - 3,200 Pa: A Nestro high-performance fan with above-average efficiency and high energy saving potential when using a frequency inverter (optional). The robust welded construction is primed and painted in RAL 5015. The fan is delivered as standard with an inlet cone and backflow damper. Technical data at a glance: - Volumetric flow: 16,400 m³/h - Corresponding underpressure: 3,200 Pa - Electric motor: 22 kW / 400 Volt / 50 Hz - Speed: 3,000 rpm - Design: B5 - Pressure nozzle: without - Application area: Nestro underpressure filter and others - Injection nozzle d= 400 mm with flange ring - Injection nozzle d= 350 mm with flange ring - Backflow damper d= 350 mm with flange edge - Backflow damper d= 400 mm with flange edge - Briquetting press C150; 30 - 50 kg/h, hydraulic unit 5.5: Technical data: - Power consumption (hydraulics): 5.5 kW - Briquette diameter: 50 mm - Weight: 650 kg - Briquetting performance with a bulk density of approx. 250 kg/m³, material-dependent: 30 - 50 kg/h - Ground clearance with base frame (art. no. 710300): 350 mm - Briquetting press, dust-proof - Briquetting press complete with hydraulic solenoid valve control for automatic operation, oil tank with 100 l oil, in welded construction, including main cylinder, stuffing cylinder, gripper cylinder, pressing jaw, electrical control panel with fully automatic control and 5 m cable The press is standardly equipped with: Monitoring switch for oil temperature, hardened press bushing, connection part for briquette line and automatic briquette length adjustment

Condition: new, power: 40 kW (54.38 HP), travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,000 mm, workpiece weight (max.): 10,000 kg, number of slots in tool magazine: 60, controller manufacturer: HEIDENHAIN, Equipment: CE marking, The LAGUN TM 3 is a highly stable traveling column milling center in a T-shaped design, featuring a large rotary table and a large working envelope. It offers maximum flexibility and is ideally suited for the precise machining of large and complex workpieces. Its advantages: ✔ Delivery and commissioning by JMT technicians included ✔ Original spare parts available directly from stock ✔ Technical support and on-site service in Germany ✔ Training and instruction of operating personnel included ✔ Financing and lease-purchase options available upon request ✔ 24-month warranty Technical specifications: Control: ✔ HEIDENHAIN TNC 7 ✔ HEIDENHAIN 24" TFT screen ✔ HEIDENHAIN motors, measuring systems, and electronic handwheel HR-510 Cooling: Internal coolant supply (ICS) 36 bar Tool changer: 60-position chain magazine with double gripper Chip removal: Nedehy Aunspfx Agkjwk 2 x articulated belt conveyors (front and rear) Enclosure: Full enclosure (perimeter) Accuracy: Positioning accuracy: ± 0.015 mm Repeatability: ± 0.008 mm Contact us – we will be happy to advise you and prepare a customized offer.

Condition: new, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,500 mm, table load: 6,000 kg, spindle speed (max.): 6,000 rpm, total height: 3,800 mm, total length: 7,000 mm, total width: 5,550 mm, table length: 1,600 mm, table width: 1,200 mm, table height: 965 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, overall weight: 26,500 kg, The LAGUN BM 3 RT is a highly stable bed-type milling center with a rotary table, offering high flexibility, stability, precision, and economical operation – all without the need for complex foundation work. Your advantages: ✔ Delivery and commissioning by JMT technicians included ✔ Original spare parts available directly from stock ✔ Technical support and on-site service in Germany ✔ Training and instruction of operating personnel included ✔ Financing and lease-purchase options available upon request ✔ 24-month warranty Technical features: Control system: ✔ HEIDENHAIN TNC 7 ✔ HEIDENHAIN 24" TFT screen ✔ HEIDENHAIN motors, measuring systems, and electronic handwheel HR-510 Cooling: Internal coolant supply (ICS) 36 bar Tool changer: 40-position chain magazine with dual gripper Chip disposal: 2 x hinge belt conveyors (front and rear) Enclosure: Full enclosure (perimeter) Accuracy: Positioning accuracy: ± 0.015 mm Repeatability: ± 0.008 mm Contact us – we will be happy to advise you and prepare an individual offer. Nwjdpfxeq I Ncqo Agkek

Condition: new, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,000 mm, table load: 10,000 kg, spindle speed (max.): 6,000 rpm, table length: 1,800 mm, table width: 1,800 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, Equipment: rotational speed infinitely variable, The LAGUN TM 4 is a highly stable traveling column milling center with a T-shaped frame, featuring a large rotary table and a large working area diameter. It offers maximum flexibility and is ideally suited for the precise machining of large and complex workpieces. Its advantages: ✔ Delivery and commissioning by JMT technicians included ✔ Original spare parts available directly from stock ✔ Technical support and on-site service in Germany ✔ Training and instruction of operating personnel included Nodpfxeq I Nkbo Agkewk ✔ Financing and lease-purchase options available upon request ✔ 24-month warranty Technical features: Control system: ✔ HEIDENHAIN TNC 7 ✔ HEIDENHAIN 24" TFT screen ✔ HEIDENHAIN motors, measuring systems, and electronic handwheel HR-510 Coolant system: Internal coolant supply (ICS) 36 bar Tool changer: 60-position chain magazine with dual gripper Chip removal: 2 x hinged belt conveyor (front and rear) Enclosure: Full enclosure (perimeter) Accuracy: Positional accuracy: ± 0.020 mm Repeatability: ± 0.008 mm Contact us – we will be happy to advise you and prepare a customized offer for you.

Condition: new, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 2,500 mm, table load: 20,000 kg, spindle speed (max.): 6,000 rpm, table length: 2,195 mm, table width: 2,195 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, Equipment: rotational speed infinitely variable, The LAGUN TL 4 is a highly stable, T-shaped machining center with a large rotary table and a large working envelope. It offers maximum flexibility and is ideal for the precise machining of large and complex workpieces. Its advantages: ✔ Delivery and commissioning by JMT technicians included ✔ Original spare parts available directly from stock ✔ Technical support and on-site service in Germany ✔ Training and instruction of operating personnel included ✔ Financing and lease-purchase options available on request ✔ 24-month warranty Technical features: Control: ✔ HEIDENHAIN TNC 7 ✔ HEIDENHAIN 24" TFT screen ✔ HEIDENHAIN motors, measuring systems, and electronic handwheel HR-510 Cooling: Internal coolant supply (ICS) 36 bar Nwjdpfsq I Nlyjx Agkjk Tool changer: 60-position drum magazine with dual gripper Chip disposal: Double-hinge belt conveyor (front and rear) Enclosure: Full enclosure (perimeter) Accuracy: Positioning accuracy: ± 0.020 mm Repeatability: ± 0.008 mm Contact us – we will be happy to advise you and prepare a customized offer.

Condition: new, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, spindle speed (max.): 6,000 rpm, table width: 1,100 mm, table load: 10,000 kg, table length: 3,100 mm, overall weight: 27,000 kg, torque: 1,178 Nm, spindle motor power: 53 W, Equipment: rotational speed infinitely variable, The LAGUN BM 3 C is a highly stable bed-type milling center with an integrated rotary table, offering exceptional flexibility, stability, precision, and cost-effective operation – all without the need for complex foundation work. Your benefits: ✔ Delivery and commissioning by JMT technicians included ✔ Original spare parts available directly from stock ✔ Technical support and on-site service in Germany ✔ Training and instruction for operating personnel included ✔ Financing and leasing options available upon request ✔ 24-month warranty Technical specifications: Control system: ✔ HEIDENHAIN TNC 7 ✔ HEIDENHAIN TFT screen 24" ✔ HEIDENHAIN motors, measuring systems, and electronic handwheel HR-510 Integrated rotary table: Ø 1,100 mm Coolant system: Internal coolant supply (ICS) 36 bar Tool changer: 40-position chain magazine with dual gripper Chip removal: Double-hinge belt conveyor (front and rear) Nedpfx Aom Tv Iiogkjwk Enclosure: Full enclosure (perimeter) Accuracy: Positioning accuracy: ± 0.015 mm Repeatability: ± 0.008 mm Contact us – we will be happy to advise you and prepare a customized offer.

Condition: new, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, spindle speed (max.): 6,000 rpm, table width: 1,200 mm, table load: 6,000 kg, table length: 1,600 mm, torque: 1,178 Nm, power: 31 kW (42.15 HP), Equipment: rotational speed infinitely variable, The LAGUN BM 2 RT is a highly stable, bed-type milling center with a rotary table, offering high flexibility, stability, precision, and economical operation – all without the need for complex foundation work. Your advantages: ✔ Delivery and commissioning by JMT technicians included ✔ Original spare parts available directly from stock ✔ Technical support and on-site service in Germany ✔ Training and instruction of operating personnel included ✔ Financing and lease-purchase options available upon request ✔ 24-month warranty Technical specifications: Control system: Njdpfxoff Hz Hs Agkewk ✔ HEIDENHAIN TNC 7 ✔ HEIDENHAIN 24" TFT screen ✔ HEIDENHAIN motors, measuring systems, and electronic handwheel HR-510 Cooling: Internal coolant supply (ICS) 36 bar Tool changer: 40-position chain magazine with dual gripper Chip removal: 2 x hinged belt conveyors (front and rear) Enclosure: Full enclosure (perimeter) Accuracy: Positioning accuracy: ± 0.015 mm Repeatability: ± 0.008 mm Contact us – we will be happy to advise you and prepare a customized offer.

Condition: new, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, spindle speed (max.): 6,000 rpm, table width: 1,200 mm, table load: 6,000 kg, table length: 1,600 mm, workpiece weight (max.): 6,000 kg, torque: 1,178 Nm, power: 31 kW (42.15 HP), Equipment: rotational speed infinitely variable, The LAGUN BM 3 RT is a highly stable bed-type milling center with a rotary table, offering high flexibility, stability, precision, and economical operation – all without the need for complex foundation work. Your advantages: ✔ Delivery and commissioning by JMT technicians included ✔ Original spare parts available directly from stock ✔ Technical support and on-site service in Germany ✔ Training and instruction of operating personnel included ✔ Financing and lease purchase options available upon request ✔ 24-month warranty Technical features: Control system: ✔ HEIDENHAIN TNC 7 ✔ HEIDENHAIN 24" TFT screen ✔ HEIDENHAIN motors, measuring systems, and electronic handwheel HR-510 Cooling: Internal coolant supply (IKZ) 36 bar Nwodpfx Agohy At Askek Tool changer: 40-position chain magazine with dual gripper Chip removal: Double-hinge belt conveyor (front and rear) Enclosure: Full enclosure (perimeter) Accuracy: Positioning accuracy: ± 0.015 mm Repeatability: ± 0.008 mm Contact us – we will be happy to advise you and provide you with a customized offer.

Condition: new, travel distance X-axis: 5,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, spindle speed (max.): 6,000 rpm, table width: 1,100 mm, table load: 14,000 kg, table length: 5,100 mm, overall weight: 35,000 kg, torque: 1,178 Nm, spindle motor power: 53 W, Equipment: rotational speed infinitely variable, The LAGUN BM 5 is a highly stable bed-type milling center and impresses with its high stability, precision, reliability, and economical operation – all without requiring extensive foundation work. Your advantages: ✔ Delivery and commissioning by JMT technicians included ✔ Original spare parts available directly from stock ✔ Technical support and on-site service in Germany ✔ Training and instruction of operating personnel included ✔ Financing and lease-purchase options available upon request ✔ 24-month warranty Technical specifications: Control system: ✔ HEIDENHAIN TNC 7 control ✔ HEIDENHAIN 24" TFT screen ✔ HEIDENHAIN motors, measuring systems, and electronic handwheel HR-510 Cooling: Internal coolant supply (ICS) 36 bar Tool changer: 24-position drum magazine with dual gripper Chip disposal: 2 x articulated belt conveyors (front and rear) Preparation: Preparation for 4th axis (rotary table optional) Enclosure: Nwodpfxsq Ixh Hj Agkek Full enclosure (perimeter) Accuracy: Positional accuracy: ± 0.025 mm Repeatability: ± 0.008 mm Contact us – we will be happy to advise you and prepare a customized offer.

Condition: new, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 800 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, table length: 1,900 mm, table width: 1,100 mm, spindle speed (max.): 6,000 rpm, table load: 4,000 kg, position of the milling head: Vertikal, torque: 1,356 Nm, spindle nose: SK 50 - DIN 69871A, Equipment: rotational speed infinitely variable, The STARVISION DH 2012 impresses with its robust portal design, powerful drives, and high-quality components. It offers high precision, rigidity, and reliable machining – even for demanding machining tasks. Ideally suited for mold making, machine construction, and contract manufacturing. Your advantages: ✔ Installation and commissioning in Germany included ✔ Service and spare parts directly from JMT ✔ Financing and lease-purchase options available ✔ 24 months warranty Technical features: Control: ✔ HEIDENHAIN TNC 7 control ✔ HEIDENHAIN TFT screen 19" ✔ HEIDENHAIN motors, measuring systems, and electronic handwheel Cooling: Internal coolant supply (IKZ) 70 bar Tool changer: 60-position chain magazine with double gripper Chip removal: Hinged belt chip conveyor (transverse) Double screw conveyor (longitudinal) Preparation: Preparation for 4th axis (rotary table) Nwodpoq Ixc Tefx Agkjk Enclosure: Full enclosure, closed at the top Accuracy: Positional accuracy: ± 0.025 mm Repeat accuracy: ± 0.020 mm Contact us – we will be happy to advise you and prepare an individual offer for you.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: M134377I2WA, turning diameter: 300 mm, spindle speed (max.): 5,000 rpm, rotational speed (max.): 2,500 rpm, workpiece weight (max.): 30 kg, total height: 3,300 mm, total length: 2,200 mm, total width: 3,400 mm, overall weight: 9,600 kg, Equipment: documentation/manual, rotational speed infinitely variable, Fully automated Hwacheon Hi-TECH CNC lathe with WEKAL portal system including robot Base: Hwacheon Hi-TECH 450BL YSMC (Siemens) Year of manufacture 2024 | Like new | Manufacturer's warranty until 03/26/2027 - transfer possible after coordination with the manufacturer | Immediately available Highlights ✓ Year of manufacture 2024 ✓ Automatic door drive ✓ Like new condition ✓ Robot interface ✓ Fully functional ✓ Stroke monitoring ✓ High-pressure coolant system ✓ Siemens SINUMERIK with ShopTurn ✓ Oil/emulsion mist filter ✓ DXF reader integrated ✓ Fully automatic WEKAL portal system ✓ Y-axis ±60 mm ✓ WEKAL WRB roller conveyor ✓ Counter spindle 4,000 rpm ✓ Robot gripper module ✓ Driven tools up to 5,000 rpm ✓ Complete documentation Nwsdpfxozhltce Agkjk ✓ Torque upgrade ✓ Ongoing maintenance with records ✓ Completely automated manufacturing cell The system is designed for the automated machining of round material. Workpiece range: • Diameter 50–300 mm • Workpiece weight up to 30 kg The WEKAL automation system handles the loading and unloading of workpieces and enables economical, low-manned operation. WEKAL WPA portal system • 2-axis portal system • X-beam 7,000 mm • X-travel approx. 5,500 mm • Z-travel approx. 1,800 mm • WRB roller conveyor conveying length 10,000 mm • 20 workpiece carriers • Robot gripper module with quick-change system Machine equipment • Siemens ShopTurn • ProfiNet • Touchscreen • DXF reader • Network drive management • Geared spindle 22/18.5 kW • 2,500 rpm • Y-axis ±60 mm • Counter spindle • Driven tools 5,000 rpm • Torque upgrade • High-pressure cooling • Oil mist extraction • Chuck flushing • Chuck blow-out • Stroke monitoring • Automatic door drive • Robot interface Documentation and condition The system is in like-new and fully functional condition. • complete documentation available • ongoing maintenance including records • manufacturer's warranty until 03/26/2027, transferable after coordination with the manufacturer • short-term availability The system can be inspected while powered on. Extensive accessories available (chuck jaws, gripper jaws, tool holders, driven tools, etc.) Training and instruction possible. Programming and setup of your components possible. Sale ex works. Buyer organizes disassembly, loading and transport.

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, controller manufacturer: FANUC, controller model: Series 21i-M, spindle speed (max.): 18,000 rpm, number of axes: 3, This 3-axis CHIRON FZ 08 W was manufactured in 2001. It features a maximum spindle speed of 18,000 rpm and a robust tool interface with HSK-A40. The machine includes integrated pallet changer for efficient workpiece handling. If you are looking to get high-quality machining capabilities, consider the CHIRON FZ 08 W vertical machining centre we have for sale. Contact us for further details regarding this machine. • Condition: Machine is no longer functional and can only be used as a supplier of spare partsElectrical data • Kind of current: 3/N/PE ~ 50/60 Hz • Working voltage: 400 V • Control voltage: 230/24 V • Rating: 12 kVA Nodozvu R Tspfx Agkowk • Rated current: 17 A • Fuse: 20 ASpindle • Spindle type: Water-cooled motor spindle • Max. torque: approx. 15 NmOther machine details • Workpiece changing system: Integrated pallet changer (W-type) • Maintenance intervals noted: 8h, 50h, 200h, 500h, 2000h, 6000h • Lubrication requirements: INSK K11 / ALKANIA 2 (Shell)