Used Sick Light Reflector for sale (22,003)

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 1811001, type of input current: three-phase, overall weight: 110 kg, input voltage: 400 V, Equipment: emergency stop, Abrasive cut-off saw manufactured by Vertex Machinery Works Co., Ltd. The unit was produced in 2018 in Taiwan. The machine is mounted on a dedicated, blue workshop base. Technical data: Manufacturer: Vertex Machinery Works Co., Ltd. Country of manufacture: Taiwan Year of manufacture: 2018 Serial number (S/N): 1811001 Motor power supply: 400 V / 50 Hz Number of phases: 3 PH (Three-phase) Machine weight: 110 kg Compliance mark: CE Design and equipment: Lhsdpfx Amsz Sutxszsn The machine has a manual clamping lever and a vise for securing the workpiece. The cutting part is equipped with an abrasive disc (a close-up photo shows a Tyrolit disc). The steel base is equipped with a lower shelf made of perforated sheet metal.

Condition: new, color: other, Year of manufacture: 2024 Year of construction: 2024 Empty weight: 500 kg Dimensions (LxBxH): 117 x 245 x 100 cm Bucket capacity: 1,5 m³ CE mark: yes General condition: very good Technical condition: very good Lodpfowl Rkkex Amzehn Visual appearance: very good Condition CE type: CE Unused Manitou CBA1500 Light material buckets, 2450 mm wide, Bolt-on edge, Multiple on stock

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,810 kg, maximum load weight: 34,190 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 12,660 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Year of construction: 2026, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis for semi-trailer containers Fine-grained steel welded construction, semi-trailer plate with replaceable kingpins Container mounts: 1 x 40-foot with gooseneck tunnel Transport of filled tank containers is not permitted. Without rear height adjustment and without foldable center supports, transport of containers without a tunnel is not possible. Front container guide, plug-in type 24-ton, 2-speed support jack, single-sided operation, with straight lower section, without thrust compensation Wheel chocks with holders Aluminum side impact protection Galvanized steel underrun protection Half-shell fenders With anti-spray flaps per EC Rear bumper Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured to reduce tire wear and fuel consumption Offset wheelbase mm (combined transport) up to 44-ton gross train weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assist, operated by 3 brakes (start-up assist is functional up to a 30% axle load exceedance and up to a maximum speed of 25 km/h) Brake system 2-line air brake system; color-coded lines for easy servicing. Spring-loaded parking brake EBS, Electronic Braking System with front EBS socket, without connecting cable Warning: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, for display in the cab; truck must be equipped accordingly; no truck installation required. Wheels and tires 385/55 R22.5, brand selected by the manufacturer Steel rims, factory silver Electrical System 24 volts, multi-chamber lights, LED taillights and brake lights, yellow LED side lighting 2 white front position lights 2 white/red rear lane-marking lights 1 x 15-pin socket at the front, without connecting cable LED work lights on both sides (activated via reverse light) Additional LED work light(s) at the rear, activated via reverse light Operating Instructions The specified gross weight is technically possible; however, depending on the load, the gross weight may not be achieved while complying with the permissible axle, support, and fifth-wheel loads Special permit required if the total train length exceeds 16,500 mm Caution: Transport of filled tank containers is prohibited! Country of registration/plates Germany Lhodezlkgcepfx Amzen With DEKRA approval and certificate (per §13 EC - FGV) Prepared for single-line license plate holder Warning sign per ECE - 70 Contour marking with reflective strips per ECE R 048, white on the sides and red at the rear Paint finish Frame DB 7350 Novagrau *10-year warranty against rust-through* or hot-dip galvanized *15-year warranty against rust-through* Support legs black coated Customized transport solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications.

Condition: new, functionality: fully functional, Year of construction: 2022, overall weight: 1,030 kg, noise level: 59 dB, type of input current: AC, Kubota Z482 engine, 2-cylinder, Liquid-cooled, 5 kVA power output 1,500 rpm 230 Volt / 50 Hz socket Luminous flux: 4 x 320 Watt G4 LED 188,160 lumen output, illumination area: 4,500 m2 Maximum height: 8.50 meters Electro-hydraulic mast lifting system TVD - Braked road chassis with car and truck hitch AMK – Amoss kit Lhjdpfx Aj Aay Hxjmzon DSK – Dusk sensor and timer ISM - Insulation monitoring Certified wind resistance: 110 km/h Average sound pressure level: 59 dB(A) at 7 meters Weight: 1030 kg without operating fluids Fuel tank capacity: 100 liters

Condition: used, Parker Engineering & Design Vertical Light Stack Module For testing solar modules and photovoltaic modules Testing of electrical and mechanical safety Support for product development, design, and quality control Detection of potential problems during the development phase Quality and safety control Endurance testing stand Temperature control Mobile on rollers Forklift access pockets 400 VAC, 3-phase, 50 AMP Lodpfx Ajh Rvh Somzshn IR: 10,000 Amp Year of manufacture: 2012 Weight: 1400 kg Dimensions (H x W x D): 2900 x 1700 x 1900 mm You can find more testing equipment – new and used – in our shop! International shipping costs available upon request!

Condition: used, Spotlight drilling machine, drilling fixture For drilling holes for lighting fixtures, cable passage holes, and spotlight holes in suspended cabinets, display cases, and carcasses. You can find more new and used items in our shop! Ledovdc T Njpfx Amzjhn International shipping costs available upon request!

Condition: new, Lightweight roller conveyors, 540 mm, 500 mm, straight, 2 m, curved roller, 75¹ mm Lhode Abvhhjpfx Amzjn * For transporting individual items by gravity (inclined), with an inclination of approximately 2-5%, depending on the nature and weight of the conveyed goods. * The bottom of the conveyed goods may have longitudinal supports or continuous circular rails, provided these rest on the rollers. * Since the support rollers protrude, oversized conveyed goods can also be transported. * Different intermediate lengths are available on request. * The conveyed goods should rest on at least 3 support rollers. * This results in the required spacing = axle distance. * Frame: U-profile 20/70/20 mm, galvanized (aluminum or stainless steel profile on request). * Support rollers: Plastic tube, Ø 50 x 2.8 mm, ball-bearing mounted, steel tube, galvanized, Ø 50 x 1.5 mm, ball-bearing mounted, aluminum or stainless steel tube on request. * Curves: Inner radius 800 mm, support rollers continuous or divided into multiple sections depending on the conveyor width. * ¹Note: with a spacing of 75 mm, the following dimensions are supplied: instead of a length of 1000 mm, a length of 975 mm is supplied, instead of a length of 2000 mm, a length of 1950 mm is supplied. * Additional available axle distances: 62.5 mm, 125 mm, 150 mm, and 200 mm. * Other technical features: Overall width: 540 mm. Spacing (axle distance): 75¹ mm Overall width: 540 mm Design: with plastic rollers Conveyor width: 500 mm Size: Straight, 2 m

Condition: new, Lightweight roller conveyors, 540 mm, 500 mm, straight, 3 m, curved roller, 75¹ mm · For transporting individual items by gravity (slope), inclination approx. 2-5%, depending on the nature and weight of the conveyed material. · The bottom of the conveyed material can have longitudinal supports or continuous circular rails, provided they rest on the rollers. · Since the support rollers protrude, oversized conveyed material can also be transported. · Different intermediate lengths can be supplied at any time. · The conveyed material should rest on at least 3 support rollers. · This determines the required pitch = axle distance. · Frame: U-profile 20/70/20 mm, galvanized (aluminum or stainless steel profile on request). · Support rollers: plastic tube Ø 50 x 2.8 mm, ball-bearing mounted, steel tube, galvanized Ø 50 x 1.5 mm, ball-bearing mounted, aluminum or stainless steel tube on request. · Curves: inner radius 800 mm, support rollers continuously or divided into multiple sections depending on the conveyor width. · ¹Note: with a pitch of 75 mm, the following dimensions are supplied: instead of a length of 1000 mm, a length of 975 mm is supplied; instead of a length of 2000 mm, a length of 1950 mm is supplied. · Additional axle distances available: 62.5 mm, 125 mm, 150 mm and 200 mm. · Other technical specifications: overall width: 540 mm. Design: with plastic rollers Overall width: 540 mm Lhjdpfx Ao Abvhnomzsn Conveyor width: 500 mm Pitch (axle distance): 75¹ mm Size: Straight, 3 m.

Condition: new, Light roller conveyors, 340mm, 300mm, straight, 1m, steel rollers, 75¹mm * For transporting individual items by gravity (incline). Inclination of approximately 2 - 5%, depending on the nature and weight of the conveyed goods. * The bottom of the conveyed goods can have longitudinal bars or circumferential ring strips, provided that these rest on the rollers. * Since the support rollers protrude, oversized conveyed goods can also be transported. * Different intermediate lengths can be supplied at any time. * The conveyed goods should rest on at least 3 support rollers. * This determines the required pitch = axle distance. * Frame: U-profile 20/70/20 mm, galvanized (aluminum or stainless steel profile available upon request). * Support rollers: Plastic pipe Ø 50 x 2.8 mm, ball-bearing mounted, steel pipe, galvanized Ø 50 x 1.5 mm, ball-bearing mounted, aluminum or stainless steel pipe available upon request. * Curves: Inner radius 800 mm, support rollers continuous or divided into several sections depending on the conveyor width. * ¹ Note: with a pitch of 75 mm, the following dimensions are supplied: instead of a length of 1000 mm – a length of 975 mm, instead of a length of 2000 mm – a length of 1950 mm. Additional axle distances available: 62.5 mm, 125 mm, 150 mm and 200 mm. * Other technical specifications: Overall width: 340mm Pitch (axle distance): 75¹ mm Overall width: 340 mm Design: with steel rollers, galvanized Conveyor width: 300 mm Lhodpfx Amo Abu Ugjzjn Size: Straight, 1 m

Condition: new, Light roller conveyors, total width 640 mm, straight, 3 m, with steel rollers, galvanized, 75 mm. · For transporting individual items by gravity (slope), inclination approx. 2-5%, depending on the nature and weight of the conveyed goods. · The conveyed goods must have a smooth and stable base. · The smallest width of the conveyed goods must not be less than 200 mm. · The conveyed goods should rest on at least 3 roller axles. · This results in the required pitch = axle distance. · Frame: U-profile 20/70/20 mm, galvanized (aluminum frame available on request). · Rollers: ball-bearing mounted, galvanized steel rollers, Ø 48 mm, or ball-bearing mounted plastic rollers; ball-bearing mounted plastic rollers with stainless steel balls available on request. · Curves: inner radius 800 mm (different radii available). · ¹Note: with a pitch of 75 mm, the length is 975 mm instead of 1000 mm, and 1950 mm instead of 2000 mm. · Additional available axle distances: 50 mm, 125 mm, 150 mm, and 200 mm. · Other technical specifications: Size: Straight, 3 m. · Total width: 640 mm. · Design: with steel rollers, galvanized. Ledps Abvvlofx Amzshn Design: with steel rollers, galvanized Size: Straight, 3 m Conveyor width: 600 mm Pitch (axle distance): 75 mm Total width: 640 mm

Condition: new, Light roller conveyors, total width 640 mm, straight, 2 m, with steel rollers, galvanized, 100 mm · For transporting individual items by gravity (downhill), inclination approx. 2 - 5%, depending on the nature and weight of the conveyed goods · The conveyed goods must have a smooth and stable base · The smallest width of the conveyed goods must not be less than 200 mm · The conveyed goods should rest on at least 3 roller axles · This results in the required pitch = axle spacing · Frame: U-profile 20/70/20 mm, galvanized (aluminum frame available on request) · Rollers: ball-bearing, galvanized steel rollers, Ø 48 mm, or ball-bearing plastic rollers, ball-bearing plastic rollers with stainless steel balls available on request · Curves: inner radius 800 mm (different radii available) · ¹Note: with a pitch of 75 mm, the delivered length will be 975 mm instead of 1000 mm, and 1950 mm instead of 2000 mm · Additional available axle spacings: 50 mm, 125 mm, 150 mm and 200 mm · Other technical specifications: Size: Straight, 2 m · Total width: 640 mm · Design: with steel rollers, galvanized Design: with steel rollers, galvanized Pitch (axle spacing): 100 mm Total width: 640 mm Size: Straight, 2 m Lhedpfs Abvvxox Amzen Conveyor width: 600 mm

Condition: new, Light roller conveyors, total width 440 mm, 90-degree curve with steel rollers, galvanized, 75 mm. · For transporting individual items by gravity (inclination), slope approx. 2 - 5 %, depending on the nature and weight of the conveyed goods. · The conveyed goods must have a smooth and stable base. · The smallest width of the conveyed goods must not be less than 200 mm. · The conveyed goods should rest on at least 3 roller axes. · This results in the required spacing = axle distance. · Frame: U-profile 20/70/20 mm, galvanized (aluminum frame available on request). · Rollers: ball-bearing mounted, galvanized steel rollers Ø 48 mm, or ball-bearing mounted plastic rollers; ball-bearing mounted plastic rollers with stainless steel balls available on request. Lhjdpj Abvwvjfx Amzen · Curves: inner radius 800 mm (other radii available). · ¹Note: with a spacing of 75 mm, the delivered length will be 975 mm instead of 1000 mm, and 1950 mm instead of 2000 mm. · Additional axle distances available: 50 mm, 125 mm, 150 mm, and 200 mm. · Other technical specifications: size: 90° curve · Total width: 440 mm · Design: with steel rollers, galvanized Total width: 440 mm Size: 90° curve Spacing (axle distance): 75 mm Design: with steel rollers, galvanized Conveyor width: 400 mm

Condition: new, Light roller conveyor, total width 440 mm, curve 45 degrees, with steel rollers, galvanized, 75 mm. · For transporting individual items by gravity (inclination). Inclination approx. 2 - 5 %, depending on the nature and weight of the conveyed goods. · The conveyed goods must have a smooth and stable base. · The smallest width of the conveyed goods must not be less than 200 mm. · The conveyed goods should rest on at least 3 roller axles. · This determines the required pitch = axle spacing. Lsdpfxo Abvw As Amzshn · Frame: U-profile 20/70/20 mm, galvanized (aluminum frame available upon request). · Rollers: ball-bearing mounted, galvanized steel rollers, Ø 48 mm, or ball-bearing mounted plastic rollers, ball-bearing mounted plastic rollers with stainless steel balls available upon request. · Curves: inner radius 800 mm (different radii available). · ¹Note: with a pitch of 75 mm, the length will be 975 mm instead of 1000 mm, and 1950 mm instead of 2000 mm. · Additional available axle spacings: 50 mm, 125 mm, 150 mm and 200 mm. · Further technical characteristics: size: curve 45°. · Total width: 440 mm. · Design: with steel rollers, galvanized. Size: curve 45° Conveyor width: 400 mm Design: with steel rollers, galvanized Total width: 440 mm Pitch (axle spacing): 75 mm

Condition: new, Light roller conveyors, total width 640 mm, 45-degree curve with steel rollers, galvanized, 75 mm * For transporting individual goods by gravity (inclination), with an inclination of approximately 2-5%, depending on the nature and weight of the conveyed goods * The conveyed goods must have a smooth and stable base * The smallest width of the conveyed goods must not be less than 200 mm * The conveyed goods should rest on at least 3 roller axles * This determines the required spacing = axle distance * Frame: U-profile 20/70/20 mm, galvanized (aluminum frame available on request) * Rollers: ball-bearing mounted, galvanized steel rollers Ø 48 mm, or ball-bearing mounted plastic rollers, ball-bearing mounted plastic rollers with stainless steel balls available on request * Curves: inner radius 800 mm (different radii available) * ¹Note: with a spacing of 75 mm, the delivered length is 975 mm instead of 1000 mm, and 1950 mm instead of 2000 mm * Additional axle distances available: 50 mm, 125 mm, 150 mm, and 200 mm * Other technical specifications: size: 45° curve * Total width: 640 mm * Design: with steel rollers, galvanized Lhodpfx Ae Abvxmsmzsn Size: 45° curve Track width: 600 mm Spacing (axle distance): 75 mm Design: with steel rollers, galvanized Total width: 640 mm

Condition: new, Light roller conveyors, 440 mm, 400 mm, straight, 3 m, steel rollers, 75¹ mm * For transporting individual items by gravity (incline), with an inclination of approximately 2 - 5 %, depending on the nature and weight of the conveyed material. * The bottom of the conveyed material may have longitudinal supports or continuous circular rails, provided they rest on the rollers. * Because the support rollers protrude, oversized conveyed material can also be transported. * Different intermediate lengths are available on request. * The conveyed material should rest on at least 3 support rollers. * This results in the required pitch = axle distance. * Frame: U-profile 20/70/20 mm, galvanized (aluminum or stainless steel profile on request). * Support rollers: Plastic pipe Ø 50 x 2.8 mm, ball-bearing mounted, steel pipe, galvanized Ø 50 x 1.5 mm, ball-bearing mounted, aluminum or stainless steel pipe on request. * Curves: Internal radius 800 mm, support rollers continuous or divided into multiple sections, depending on the track width. * ¹ Note: with a pitch of 75 mm, the following lengths are supplied: instead of a length of 1000 mm, a length of 975 mm is supplied; instead of a length of 2000 mm, a length of 1950 mm is supplied. Additional axle distances available: 62.5 mm, 125 mm, 150 mm, and 200 mm. * Other technical specifications: overall width: 440 mm Size: Straight, 3 m Lsdpfxo Abvcle Amzehn Pitch (axle distance): 75¹ mm Overall width: 440 mm Track width: 400 mm Design: with steel rollers, galvanized

Condition: new, Lightweight roller conveyors, 440 mm, 400 mm, straight, 2 m, curved roller, 75¹ mm * For transporting individual items using gravity (slope), inclination approximately 2-5%, depending on the nature and weight of the conveyed material. * The base of the conveyed material can have longitudinal supports or circumferential ring strips, provided that they rest on the rollers. Ljdpfx Ams Abvdcszehn * Since the support rollers protrude, oversized conveyed material can also be transported. * Different intermediate lengths are available on request. * The conveyed material should rest on at least 3 support rollers. * This determines the required spacing = axle distance. * Frame: U-profile 20/70/20 mm, galvanized (aluminum or stainless steel profile available on request). * Support rollers: Plastic tube Ø 50 x 2.8 mm, ball-bearing mounted, steel tube, galvanized Ø 50 x 1.5 mm, ball-bearing mounted, aluminum or stainless steel tube available on request. * Curves: Inner radius 800 mm, support rollers continuous or divided into multiple sections depending on the conveyor width. * ¹Note: With a spacing of 75 mm, the following lengths are supplied: instead of a length of 1000 mm, a length of 975 mm is supplied; instead of a length of 2000 mm, a length of 1950 mm is supplied. * Additional available axle distances: 62.5 mm, 125 mm, 150 mm, and 200 mm. * Further technical specifications: Overall width: 440 mm Conveyor width: 400 mm Design: with plastic rollers Spacing (axle distance): 75¹ mm Size: Straight, 2 m Overall width: 440 mm

Condition: new, Lightweight roller conveyors, 440 mm, 400 mm, 90-degree curve, model Ku.-RL 75¹ mm · Designed for transporting individual items by gravity (slope), with an inclination of approximately 2-5%, depending on the nature and weight of the conveyed material. Lhsdpfx Amo Abvdpezjn · The base of the conveyed material can have longitudinal bars or continuous ring strips, provided that they rest on the rollers. · Since the support rollers protrude, oversized conveyed material can also be transported. · Alternative intermediate lengths are available upon request. · The conveyed material should rest on at least 3 support rollers. · This determines the required spacing = axle distance. · Frame: U-profile 20/70/20 mm, galvanized (aluminum or stainless steel profile available upon request). · Support rollers: plastic pipe Ø 50 x 2.8 mm, ball-bearing mounted; steel pipe, galvanized Ø 50 x 1.5 mm, ball-bearing mounted; aluminum or stainless steel pipe available upon request. · Curves: inner radius 800 mm, support rollers continuous or divided into multiple sections depending on the conveyor width. · ¹Note: with a spacing of 75 mm, the following dimensions are supplied: instead of a length of 1000 mm, a length of 975 mm is supplied; instead of a length of 2000 mm, a length of 1950 mm is supplied. · Additional available axle distances: 62.5 mm, 125 mm, 150 mm, and 200 mm. · Other technical specifications: overall width: 440 mm. Size: 90° curve Design: with plastic rollers Overall width: 440 mm Conveyor width: 400 mm Spacing (axle distance): 75¹ mm

Condition: new, Lightweight roller conveyors, 440mm, 400mm, straight, 1m, steel rollers, 100mm · For transporting individual items by gravity (incline). Inclination approx. 2 - 5%, depending on the nature and weight of the conveyed goods. · The bottom of the conveyed goods may have longitudinal supports or continuous ring strips, provided that they rest on the rollers. Lhodpfx Ams Abvd Aezsn · Since the support rollers protrude, oversized conveyed goods can also be transported. · Different intermediate lengths are available on request. · The conveyed goods should rest on at least 3 support rollers. · This results in the required pitch = axle distance. · Frame: U-profile 20/70/20 mm, galvanized (aluminum or stainless steel profile on request). · Support rollers: plastic tube, Ø 50 x 2.8 mm, ball-bearing mounted; steel tube, galvanized, Ø 50 x 1.5 mm, ball-bearing mounted; aluminum or stainless steel tube on request. · Curves: inner radius 800 mm, support rollers continuous or divided into multiple sections depending on the conveyor width. · ¹ Note: with a pitch of 75 mm, the following lengths are supplied: instead of 1000 mm length – 975 mm length, instead of 2000 mm length – 1950 mm length. Additional axle distances available: 62.5 mm, 125 mm, 150 mm and 200 mm. · Other technical characteristics: overall width: 440mm Conveyor width: 400 mm Pitch (axle distance): 100 mm Overall width: 440 mm Size: Straight, 1 m Design: with steel rollers, galvanized.

Condition: new, Light roller conveyors, 440mm, 400mm, straight, 2m, steel rollers, 100mm · For transporting individual items by gravity (inclination), with an inclination of approximately 2 - 5%, depending on the nature and weight of the conveyed goods. · The bottom of the conveyed goods may have longitudinal supports or continuous circular rails, provided they rest on the rollers. · Since the support rollers protrude, oversized conveyed goods can also be transported. Lhsdpfxs Abvd Ns Amzjn · Different intermediate lengths are available at any time. · The conveyed goods should rest on at least 3 support rollers. · This results in the required spacing = axle distance. · Frame: U-profile 20/70/20 mm, galvanized (aluminum or stainless steel profile available on request). · Support rollers: plastic tube Ø 50 x 2.8 mm, ball-bearing mounted, steel tube, galvanized Ø 50 x 1.5 mm, ball-bearing mounted, aluminum or stainless steel tube available on request. · Curves: inner radius 800 mm, support rollers continuous or divided into multiple sections, depending on the conveyor width. · ¹ Note: with a spacing of 75 mm, the following dimensions are supplied: instead of a length of 1000 mm - a length of 975 mm, instead of a length of 2000 mm - a length of 1950 mm. Additional available axle distances: 62.5 mm, 125 mm, 150 mm and 200 mm. · Other technical specifications: overall width: 440mm Conveyor width: 400 mm Size: straight, 2 m Overall width: 440 mm Design: with steel rollers, galvanized Spacing (axle distance): 100 mm

Condition: new, Light roller conveyors, 440mm, 400mm, straight, 2m, curve radius 100mm * For transporting individual items by gravity (inclination), with a slope of approximately 2-5%, depending on the nature and weight of the conveyed material. * The bottom of the conveyed material may have longitudinal supports or circumferential ring profiles, provided they rest on the rollers. * As the support rollers protrude, oversized conveyed material can also be transported. * Different intermediate lengths are available on request. * The conveyed material should rest on at least 3 support rollers. * This determines the required spacing = axle distance. * Frame: U-profile 20/70/20 mm, galvanized (aluminum or stainless steel profile available on request). * Support rollers: Plastic tube, Ø 50 x 2.8 mm, ball-bearing mounted; steel tube, galvanized, Ø 50 x 1.5 mm, ball-bearing mounted; aluminum or stainless steel tube available on request. * Curves: Internal radius 800 mm, support rollers divided continuously or in multiple sections, depending on the conveyor width. * ¹Note: with a spacing of 75 mm, the following dimensions will be supplied: instead of a length of 1000 mm, a length of 975 mm will be supplied; instead of a length of 2000 mm, a length of 1950 mm will be supplied. * Additional axle distances available: 62.5 mm, 125 mm, 150 mm, and 200 mm. Lede Abvfmspfx Amzehn * Other technical specifications: Overall width: 440mm Size: Straight, 2 m Spacing (axle distance): 100 mm Design: With plastic rollers Overall width: 440 mm Conveyor width: 400 mm

Condition: new, Light roller conveyors, overall width 440 mm, straight, 1 m long, with steel rollers, galvanized, 75 mm. Lhodpfx Ame Abvtdjzjn · For transporting individual items by gravity (incline). Slope approximately 2-5%, depending on the properties and weight of the conveyed goods. · The conveyed goods must have a smooth and stable base. · The smallest width of the conveyed goods must not be less than 200 mm. · The conveyed goods should rest on at least 3 roller axles. · This determines the required spacing = axle distance. · Frame: U-profile 20/70/20 mm, galvanized (aluminum frame available upon request). · Rollers: ball-bearing mounted, galvanized steel rollers, Ø 48 mm, or ball-bearing mounted plastic rollers, ball-bearing mounted plastic rollers with stainless steel balls available upon request. · Curves: inner radius 800 mm (other radii available). · ¹Note: with a spacing of 75 mm, the delivered length will be 975 mm instead of 1000 mm, and 1950 mm instead of 2000 mm. · Additional available axle distances: 50 mm, 125 mm, 150 mm and 200 mm. · Other technical specifications: Size: straight, 1 m. · Overall width: 440 mm. · Design: with steel rollers, galvanized. Overall width: 440 mm Size: straight, 1 m Design: with steel rollers, galvanized Track width: 400 mm Spacing (axle distance): 75 mm

Condition: new, Light roller conveyor, overall width 440 mm, straight, 3 m, with steel rollers, galvanized, 75 mm. · For transporting individual items by gravity (incline). Inclination approx. 2 - 5 %, depending on the nature and weight of the conveyed goods. · The conveyed goods must have a smooth and stable base. · The smallest width of the conveyed goods must not be less than 200 mm. · The conveyed goods should rest on at least 3 roller axles. · This results in the required pitch = axle spacing. · Frame: U-profile 20/70/20 mm, galvanized (aluminum frame available on request). · Rollers: ball-bearing, galvanized steel rollers, Ø 48 mm, or ball-bearing plastic rollers, ball-bearing plastic rollers with stainless steel balls available on request. · Curves: inner radius 800 mm (other radii available). · ¹Note: with a pitch of 75 mm, the lengths are as follows: instead of 1000 mm - length 975; instead of 2000 mm - length 1950. · Additional axle spacings available: 50 mm, 125 mm, 150 mm, and 200 mm. · Further technical specifications: Size: Straight, 3 m. · Overall width: 440 mm. · Design: with steel rollers, galvanized. Conveyor width: 400 mm. Size: Straight, 3 m. Pitch (axle spacing): 75 mm. Design: with steel rollers, galvanized. Lsdpfx Amj Abvtqszjhn Overall width: 440 mm.

Condition: new, Light roller conveyors, overall width 540 mm, straight 2 m with steel rollers, galvanized, 75 mm. * For transporting individual items by gravity (downhill). Inclination approx. 2-5%, depending on the nature and weight of the conveyed goods. * The conveyed goods must have a smooth and stable base. * The smallest width of the conveyed goods must not be less than 200 mm. * The conveyed goods should rest on at least 3 roller axes. * This results in the required pitch = axle distance. * Frame: U-profile 20/70/20 mm, galvanized (aluminum frame available upon request). * Rollers: ball-bearing mounted, galvanized steel rollers, Ø 48 mm, or ball-bearing mounted plastic rollers; ball-bearing mounted plastic rollers with stainless steel balls available upon request. * Curves: inner radius 800 mm (other radii available). * ¹Note: with a pitch of 75 mm, the delivered length will be 975 mm instead of 1000 mm, and 1950 mm instead of 2000 mm. * Additional axle distances available: 50 mm, 125 mm, 150 mm, and 200 mm. * Further technical specifications: Size: Straight 2 m. * Overall width: 540 mm. * Design: with steel rollers, galvanized. Size: Straight 2 m Design: with steel rollers, galvanized Lhsdpfe Abvuhsx Amzen Overall width: 540 mm Pitch (axle distance): 75 mm Conveyor width: 500 mm

Condition: new, Light roller conveyors, 340 mm, 300 mm, straight, 2 m, steel rollers, 75¹ mm * For transporting individual items by gravity (slope). Inclination approximately 2 - 5 %, depending on the nature and weight of the conveyed goods. * The base of the conveyed goods may have longitudinal supports or circumferential ring strips, provided that they rest on the rollers. * Since the support rollers protrude, oversized conveyed goods can also be transported. * Different intermediate lengths are available on request. * The conveyed goods should rest on at least 3 support rollers. * This determines the required pitch = center distance. * Frame: U-profile 20/70/20 mm, galvanized (aluminum or stainless steel profile on request). * Support rollers: Plastic tube, Ø 50 x 2.8 mm, ball-bearing mounted, steel tube, galvanized, Ø 50 x 1.5 mm, ball-bearing mounted, aluminum or stainless steel tube on request. * Curves: Internal radius 800 mm. Support rollers are continuous or divided into several sections, depending on the conveyor width. * ¹ Note: With a pitch of 75 mm, the following dimensions are supplied: instead of a length of 1000 mm - a length of 975 mm, instead of a length of 2000 mm - a length of 1950 mm. Additional center distances available: 62.5 mm, 125 mm, 150 mm, and 200 mm. * Other technical specifications: Overall width: 340 mm Lodpfxj Abu Ums Amzjhn Overall width: 340 mm Pitch (center distance): 75¹ mm Size: Straight, 2 m Conveyor width: 300 mm Design: with steel rollers, galvanized.

Condition: new, Lightweight roller conveyors, 540 mm, 500 mm, straight, 1 m, curved roller, 100 mm · For transporting individual items by gravity (incline). Slope approximately 2-5%, depending on the nature and weight of the conveyed material. · The base of the conveyed material may have longitudinal supports or continuous circular profiles, provided they rest on the rollers. · Since the support rollers protrude, oversized conveyed material can also be transported. · Different intermediate lengths can be supplied at any time. · The conveyed material should rest on at least 3 support rollers. Lodpo Abviljfx Amzshn · This results in the required pitch = axle distance. · Frame: U-profile 20/70/20 mm, galvanized (aluminum or stainless steel profile on request). · Support rollers: Plastic pipe, Ø 50 x 2.8 mm, ball-bearing mounted; steel pipe, galvanized, Ø 50 x 1.5 mm, ball-bearing mounted; aluminum or stainless steel pipe on request. · Curves: Inner radius 800 mm, support rollers continuously or divided into multiple sections, depending on the conveyor width. · ¹Note: with a pitch of 75 mm, the following will be supplied: instead of a length of 1000 mm, a length of 975 mm; instead of a length of 2000 mm, a length of 1950 mm. · Additional available axle distances: 62.5 mm, 125 mm, 150 mm, and 200 mm. · Other technical characteristics: overall width: 540 mm. Conveyor width: 500 mm Design: with plastic rollers Size: straight, 1 m Pitch (axle distance): 100 mm Overall width: 540 mm