Used Sorg Four Column Press - Hydraulic for sale (30,870)

Condition: new, Year of construction: 2026, pressing force: 100 t, pressure:100 t Nsdpfxefu Nqxj Aa Rsda passage width:500 mm stroke:400 mm Approx. weight (w/o operational materials):5,5 t Measurements L x W x H:ca. 1300 x 2000 x 2750 mm Table size:750 x 600 mit T-Nuten mm Table height above ground level:850 mm Oil Tank Capacity:190 l main cylinder:230 Ø mm Auxiliary cylinder:2 Stk - 50 x 30 Ø mm Auxiliary guidance:2 Stk - 50 Ø stk. Engine Output:11 kW :23 Lt./min. Approach Speed:110 mm/sec Pressure Speed:9 mm/sec Return Speed:200 mm/sec Ram plate:750 x 600 mit T-Nuten mm pre-run valve:NG.63 Stk Painting:Lichtgrau & Dunkelgrau Siemens Control System:S7 1200 Monitor:Siemens 7 Zoll Light sensors sick:750 + 150 mm Control Set-up operation:manuell ohne Lichtsensor Automatic control:mit Lichtsensor Special feature: When operating at 260bar the machine reaches a pressure level of 70 tons.

Condition: new, Year of construction: 2019, machine/vehicle number: DF0287, pressing force: 25 t, pressure:25 t passage width:1000 mm stroke:800 mm Weight of machine approx.:4 t dimensions:ca. 2054 x 2200 x 3126 mm return capacity:2 t :5 kW Max Working height:800 mm :80 mm/sec :10 mm/sec. :80 mm/sec :800 mm pestle plate:400 x 400 mm table plate:1000 x 800 mm table height over floor:850 mm Table cut-out:650 x 150 mm :200 l pestle is stabilized by 4 per ø 50 mm chrome-plated linear guides:Bronzeführungen pestle strength:122 mm Steel plate on spring rolls:600 x 400 x 15 mm :S7 1200 Lightcurtains by Schmersal:1800 mm ab Boden Monitor:SIEMENS 10 Zoll Installation table on the left of the machine body with 10mm thick plage-milled steel plates:1000 x 800, 850 hoch mm Njdpfsfxyikjx Aa Reda

Condition: new, Year of construction: 2024, neu 2024 7305 prompt, Zwischenverkauf v Italien Nodpfswiry Ijx Aa Rsda 46400 € 886.24 € 1 100 to 500 mm 700 x 350 mm 800 x 600 mm 500 mm 300 mm 25 mm/s 4 mm/s 4 kW 1900 mm 1200 mm 2600 mm 2100 kg 2-fold round guidance table and ram with T-slots 2 hand operation Siemens PLC manometer users manual incl. pressure switch

Condition: new, Year of construction: 2019, pressing force: 110 t, pressure:110 t stroke:400 mm weight of the machine ca.:4,5 t dimensions:ca. 1650 x 1150 x 2800 mm return capacity:11 t total power requirement:11 kW Max Working height:500 mm Ndjdpfx Aaefxygto Roa :10 mm :10 mm/sec. speed rapid traverse:10 mm/sec :400 mm pestle plate:600 x 500 mm table plate:800 x 700 mm Table cut-out:150 x 150 mm table height over floor:900 mm :250 l Monitor SIEMENS:7 Zoll Side trim:2.800,- ? :4.800,- ? Light barriers front and back:2.400,- ?

Condition: new, neu ca. 4 Monate ab Auftragse Italien 103500 € 1956.15 € 150 to 500 mm 1250x1000 mm 600 mm 23 mm/s 4 mm/s 5.5 kW 1520 mm 1270 mm 2500 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke Ndedpfjynm Icox Aa Rsa • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on Request

Condition: used, Technical details: pressure: 40 t distance between columns: - mm stroke: 500 mm throat: 360 mm distance table/ram: max. 800 mm daylight dimension : table/slide up: 600 mm ram stroke: 500 mm ram speed - forward: 0,100 m/s ram speed - reverse: 0,450 m/s Table dimensions: 750 x 500 mm passage inside table: 200 mm surface area of ram: 360 x 450 x 72 mm mortise hole in ram: 40 x 75 mm height over floor: 700 mm total power requirement: 13 kW weight of the machine ca.: 3,2 t dimension machine xH: 1,75 x 1,15 x 2,95 m Operation via two-hand control panel. (and one-hand operation) Nodpfx Ajw Smukja Reda *

Condition: used, Technical details: pressure: 100 t daylight dimension : table/slide up: 800 mm throat: 360 mm ram stroke: 500 mm ram speed - forward: 200 m/s ram speed - reverse: 200 m/s Table dimensions: 750 x 560 x 90 mm passage inside table: Ø 26 mm clamping surface ram: BxT: 530 x 400 mm mortise hole in ram: Ø 50 mm cylinder diameter: Ø 250 mm height over floor: 720 mm total power requirement: 17,0 kW Nedpfx Aasvc Ax Ne Roda weight of the machine ca.: 5,5 t dimension machine xH: 1,8 x 1,2 x 3,2 m

Condition: new, Year of construction: 2022, pressing force: 15 t, Single column press with 15 T capacity suitable for continuous shift operation a) travel speed 10 mm/sec. downwards, b) opening speed up to 25 mm/sec c) starting pressing speed 10 mm/sec d) table size 400x400 mm e) ram size 200x200 mm, with T grooves and central cylinder clamping f) Overall size approx. 1150x800x1750 mm g) oil temperature display on oil tank h) pressure adjustment from 5 T to 17 T ( adjustable by rotary control ) i) Hand lever operation with two speeds j) Machine body powder-coated, or double-painted k) Control cabinet supply line from above with 3000 mm cable and 16 Ampere plug l) assembly, commissioning, instruction against separate calculation Press design Single column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Press force max. ( at 250 bar ) 150 kN Free ripping force max. 10 kN Pressure build-up time Closed die Steel to steel Max. 2 sec. Max. Opening width 400 mm Stroke and min. opening 350 mm Table height above floor 850 mm Height above floor (headroom) approx. 1900 mm Hall height min. 2.500 mm Parallel deviation at 20°C +/- 0.1 mm Determined at max. clamping force with 70% occupancy < = 0.3 mm/m Weight Total weight of the press without operating materials approx. 1.1 to Ndsdpfx Aeitylgoa Roa Fast closing with 10 mm sec. Press speed 10 - 0 mm sec. Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Number of pressing cylinders 1 pc. Operating pressure max. 290 bar Pressing pressure build-up time . 2 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump Gear pump approx. 9 L/min Oil volume approx. HLP 46 MW 80 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Electrical system 400 V AC Main supply Control voltage 24 V DC Hydraulic pumps 24 V DC Frequency 50 Hz Hydraulic connection Main motor 3 kW Total connection Approx. 5 kW Equipment control cabinet Protection class IP 54 Reserve space Approx. 20 Cooling no Interior lighting no Operating mode switch Lockable yes

Condition: new, pressure 28.0 t throat 225 mm stroke 150 mm table surface area 325 x 300 mm work speed 2.0 - 9.8 mm/sek return speed 12.8 mm/sek total power requirement 4.0 kW weight of the machine ca. 650 kg dimensions of the machine ca. 1800 x 900 x 2000 mm - NC control to adjust the piston stroke - Selector switch for manual or semi-automatic operation - Flow control valve and pressure control valve - Integrated pressure gauge - Various tools can be installed on the piston - inside Njdpfxszkl Huj Aa Reda There is a 40 mm hole for attaching the tools

Condition: as good as new (ex-display), Year of construction: 2018, machine/vehicle number: DF0151 - Rev.00, pressing force: 110 t, pressure:110 t passage width:800 mm stroke:500 mm Approx. weight (w/o operational materials):5 t Measurements L x W x H:ca. 1950 x 1510 x 3145 mm Return Capacity:11 t Engine Output:20 kW Cylinder diameter:200 mm Max Working height:700 mm Approaching Speed max. :195 mm/sec Pressure Speed:1 - 15 mm/sec. Return Speed:5 - 140 mm/sec Travel:500 mm Ram plate:800 x 600 mm Thickness of ram plaet:6 Zoll Table size:800 x 700 mm Table height above ground level (approx.):900 mm Oil Tank Capacity:400 l Program Memory:200 prgms Nedpsdxrqwjfx Aa Rsda Monitor Siemens:10 Zoll Siemens Control System:S7 1200 Lightcurtains by Schmersal:700 mm Speed controlled via proportional valve for speeds between 5 to 195 mm/sec on approach, 1 to 15 mm/sec during pressure phase and 5 to 140 mm/sec during return. HMI - pressure regulation for capacity of hydraulic cylinder from 20 to 110 tons Siemens remote access for maintenance purposes Motor with energy efficiency level IE3 according to CE

Condition: used, Single-column hydraulic press, MAE Type S63SZ SO Ndedpfxsdzp Trs Aa Rja . 551277, year of manufacture approx. 1977 Nominal pressing force 63 tons. Pressing force: 50 tons (practically tested) Overhang 320 mm Table surface 850 x 630 mm Ram surface 1050 x 500 mm Ram stroke 500 mm Maximum installation height approx. 730 mm Table height above floor 970 mm Hydraulic tank capacity 600 liters Drive power 15 kW Mains connection 380 volts, 50 Hz - Hydraulic draw cushion under the table with holes through the table top - 2-hand operation - Electrical control cabinet damaged Space requirement L x W x H 2000 x 1200 x 3420 mm Weight approx. 5 tons. The machine is functional, but the control cabinet is mechanically damaged. During a test run, the machine achieves a pressing force of 50 tons; presumably, a pressure relief valve is releasing.

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Manufacturer: GIGANT Nodpox R U Idjfx Aa Rjda Model: G2-1200/2 Year: 1993 Condition: Used Stock number: 0375 Pressing force: 1200 t Number of pressing points: 2 Die table size: 3,700 x 2,700 mm Ram size: 3,700 x 2,700 mm Ram stroke: 1,000 mm Max. vertical clearance: 1,590 mm Die opening at BDC: 610 mm Lower blankholder stroke: 400 mm Movable bolster: Present at the front

Condition: new, pressure: 40stroke: 500table area: 700x500daylight: 600rapid traverse: 26working speed: 9motor: 4Features:Two-stage hydraulic pump – integrated into the machine frame Lever and push-button control – with simultaneous two-hand operation for safety Cylinder stroke: 500 mm – suitable for a wide range of applications Milled lower worktable – solid and precision-machined Two working speeds – for fast yet accurate operation Nodpfx Aaswwx Ars Reda Adjustable maximum pressure – adaptable to different tasks Integrated pressure gauge – for precise pressure monitoring during operation

Condition: used, pressure 10 t stroke 400 mm feed down 200 mm/sec feed up 450 mm/sec max. distance table - ram 630 mm Ndodpfxod R Szus Aa Roa total power requirement 8,5 kW weight of the machine ca. 1,3 t dimensions of the machine ca. m

Condition: used, Year of construction: 1985, Technical details: Pressure: 3 t throat: 150 mm max. ram stroke: 280 mm daylight dimension with clamping plate Slide/ up: 355 mm distance table/ram: 355 mm clamping plate on table: 280 x 290 x 50 mm passage opening in table: Ø 100 mm ram speed - forward: 0,1 m/s ram speed - reverse: 0,3 m/s mortise hole in ram: Ø 20 x 40 mm height over floor: 800 mm total power requirement: 1,5 kW weight of the machine ca.: 370 kg dimension machine xH: 0,8x1,2x1,9 m The single column press stands on a lower table (welded steel plate) Operation via foot switch Ndsdpfx Aasu Nfvbj Rea The press has been modified -intake for foil for punching device -punching device FIBRO (plastic disc with Ø 47,5mm for punching) *

Condition: new, machine/vehicle number: DF0189, pressing force: 500 t, pressure:500 t passage width:1200 mm stroke:400 mm weight of the machine ca.:40 t dimensions:2800 x 1750 x 4350 mm return capacity:50 t Ndjdpfjfxykajx Aa Roa :50 kW Max Working height:800 mm :0 - 10 mm :0 - 10 mm/sec. :400 mm pestle plate:1000 x 1000 mm table plate:1200 x 1200 table height over floor:1200 mm :700 l

Condition: used, Year of construction: 2001, Technical details: pressure: 250 t Nsdsxna Uzepfx Aa Roda throat: 360 mm distance table/ram: 800 mm max. ram stroke: 500 mm ram speed - reverse: 390 mm/sec. ram speed - forward: 450 mm/sec. hydraulic-pressure: 280 bar connected load: 43 kW work speed: 11....50 mm/s operating pressure: 20 MPa total power requirement: 20,5 kW weight of the machine ca.: 17 t dimension machine xH: 3,9 x 1,9 x 4,0 m

Condition: used, Year of construction: 1961, pressure 025 t table-size 450 x 500 mm stroke 500 mm dayligth 550 mm throat 200 mm Ndsdexukpcjpfx Aa Rea table height over floor 800 mm hole in the table 130 mm

Condition: used, Year of construction: 1992, pressure 75 t throat 280 mm stroke 303 mm total power requirement 15 kW weight of the machine ca. 7000 kg dimensions of the machine ca. m Ndjdpfx Aajt Hwrzj Rja

Condition: new, pressure: 70stroke: 500table area: 700x500daylight: 600rapid traverse: 25working speed: 5motor: 4messurements (LxWxH): 1400 x 900 x 2250weight approx.: 1900Features:Two-stage hydraulic pump – integrated into the machine frame Lever and push-button control – with simultaneous two-hand operation for safety Cylinder stroke: 500 mm – suitable for a wide range of applications Milled lower worktable – solid and precision-machined Two working speeds – for fast yet accurate operation Adjustable maximum pressure – adaptable to different tasks Njdswwx Axopfx Aa Reda Integrated pressure gauge – for precise pressure monitoring during operation

Condition: used, pressure 2 t throat 150 mm stroke 150 mm Ndsdpfx Aastzv Hmj Roa table surface area 310 x 250 mm power requirement 2,0 kW weight of the machine ca. 0,6 t dimensions of the machine ca. 1,2 x 0,8 x 1,7 m Single column press - with table base - various press accessories

Condition: good (used), Year of construction: 1978, Hydraulic press, two-column press, oil hydraulic press, hydraulic press, high-speed press, high-speed hydraulic press -Manufacturer: Hans Schoen, Hydraulic press type SH 100 -Pressing force: 100 tons -Motor: 11 kW -Clamping table: 580 x 440 mm / Bore Ø 150 mm -Max. insertion height: 435 mm -Projection: 650 mm -Max. stroke: 150 mm -Hole: Ø 50 mm -Documents: Operating instructions/circuit diagram Nsdpfx Aasyzd I Us Rjda -Dimensions: 1640/1300/H2650 mm -Weight: 4440 kg

Condition: like new (used), Year of construction: 2023, functionality: fully functional, PLEASE READ CAREFULLY!!! THIS OFFER IS EXCLUSIVELY FOR EUROPEAN END CUSTOMERS, AND THE FIRST INQUIRY MUST INCLUDE COMPLETE CONTACT INFORMATION. THANK YOU. The forging line consists of a hydraulic 1500-ton forging press, an induction unit with 1200 kW, and a robot with a load capacity of 300 kg. So far, prototypes have been manufactured; however, the line was actually designed for series production, which has not yet taken place. The line was built and installed in 2023. The technical specifications are as follows: Hydraulic press 1500 tons (year of manufacture 2023) SIEMENS control system - Pressing force: 1500 tons - Retraction force: 120 tons - Downward stroke: 300 mm/s - Pressing stroke: 100 mm/s - Upward stroke: 300 mm/s - Installation height: 3,000 mm - Ram stroke: 1,500 mm (!) - Ram size: 1,600 x 1,600 mm - Table size: 1,600 x 1,600 mm - Ejection force / 1 position: 40 tons - Stroke: 600 mm - Ejection speed: 250 mm/s - Return speed: 250 mm/s - Stroke: 400 + 400 mm - Traverse speed: 200 mm/s - Ram positions: 3 positions Including a 1200 kW induction unit (year of manufacture 2023) MITSUBISHI control system Ndodpfjzvnpiox Aa Rea - 1200 kW / 450 Hz induction unit for billets - Coil size: Ø 215 / Ø 150 mm, two sets of coils - Material feeding system Including a Kawasaki robot (6 axes) – Model: ZX300S-D- (year of manufacture 2023) - Max. load capacity: 300 kg - Max. reach: 2500 mm Sample images of the machines are attached.

Condition: good (used), Lechner IV B Hydraulic Bookbinding Press The machine is ready to operate. The press has a built-in hydraulic unit. Ndsdpfx Aezv Nlxea Rja Four stations. Irreplaceable in bookbinding for the production of books, pads, etc.

Condition: new, neu ca. 4 Monate ab Auftragse Italien 74800 € 1413.72 € 100 to 500 mm 1000x800 mm 600 mm 26 mm/s 5 mm/s 4 kW 1260 mm 1060 mm 2400 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom Ndedjynm H Sjpfx Aa Rea • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on Request