Used Spinner Jcl-75/1000-Tc 82 for sale (17,463)

Condition: new, max. width of grinding wheel 145 mm Duedpfx Adsuayy To Net diameter / bore of grinding wheel 300 mm Flange taper Reishauer 0 grinding wheel size 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc T1SP 300x145x160 M 2,5 EW20° 3GG Cubitron from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools

Condition: new, max. width of grinding wheel 145 mm diameter / bore of grinding wheel 300 mm Flange taper Reishauer 0 grinding wheel size 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc T1SP 300x145x160 M 1,5 EW20° 3GG from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools Dodpfx Aeuayy Hsd Nsut

Condition: new, max. width of grinding wheel 145 mm diameter / bore of grinding wheel 300 mm Flange taper Reishauer 0 grinding wheel size 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc T1SP 300x145x160 M 2,25 EW20° 3GG from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Dodpfx Adouayyye Njut Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools

Condition: new, max. width of grinding wheel 145 mm diameter / bore of grinding wheel 300 mm Flange taper Reishauer 0 Dodpfsuayymox Ad Nsut grinding wheel size 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc T1SP 300x145x160 M1 EW20° 2GG from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools

Condition: excellent (used), mileage: 16,757 km, fuel type: diesel, axle configuration: 4x4, fuel: diesel, color: red, gearing type: mechanical, suspension: steel, total length: 7,550 mm, total width: 2,600 mm, total height: 3,000 mm, Year of construction: 1991, = Additional Options and Accessories = - PTO = Notes = WATER TANK 2000 LTR WATER PUMP EVERYTHING WORKS TRUCK IS READY FOR WORK TRUCK IS LIKE NEW = Further Information = General Information Year of manufacture: 1991 Cab: double Technical Information Number of cylinders: 6 Axle Configuration Suspension: Leaf suspension Dedpfx Adoy E Upkj Njut Front axle: Steered Rear axle: Twin tires; planetary reduction axles Weights Unladen weight: 7,460 kg Payload: 4,940 kg gross vehicle weight: 12,400 kg Condition Technical condition: very good Optical condition: very good Further information Contact Thierry Leemans for more information.

Condition: excellent (used), For sale: Electric chain hoist from the renowned manufacturer Yale, model CPVF 10-8 NE. The device is in very good technical condition and is equipped with a Magnetek radio remote control system (transmitter + receiver). Technical data: • Model: CPVF 10-8 NE • Lifting capacity: 1000 kg • Year of manufacture: 2019 • Power supply: 400V / 3-phase • Lifting speed: 2 / 8 m/min Dsdpfx Ajyrh I Eed Nout • Control: radio remote control • Condition: very good, normal signs of use

Year of construction: 2025, condition: used, New: Yes Empty weight: 180 kg Dimensions of cargo space: 190 x 80 x 80 cm CE mark: yes Serial number: DPX-27509.1 Please contact Kenny Bongers, Tijmen Pesselse, Ronald van der Laar or Arjen van Dijk for more information Dedsy E Ehdopfx Ad Njut Automatic Transfer Switch - ATS Panel - ATI Panel 1000 Ampere - Applicable for generators up to 675 kVA

Condition: good (used), functionality: fully functional, mileage: 712,000 km, fuel type: diesel, overall weight: 19,000 kg, axle configuration: 2 axles, brakes: telma, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel-air, Year of construction: 2005, MERCEDES AXOR 1828 PALFINGER PK 10000 AIR SUSPENSION MANUAL GEARBOX TAULINER BODY Dodoy D Ai Njpfx Ad Neut

Condition: used, ► 40-foot HIGH CUBE (HC), used, sea transport-ready ◄ ✍️ Dimensions External: 12,192 x 2,438 x 2,896 mm (LxWxH) Internal: 12,032 x 2,352 x 2,698 mm (LxWxH) Door opening: 2,340 x 2,585 mm (WxH) ⚙️ Features: Wind and watertight Cargo worthy (suitable for international transport) Dsdpfey Ihpvjx Ad Nout Refurbished and ready for immediate use 5-year valid CSC certificate (comparable to vehicle inspection) ⤴️ Additional services on request: Custom modifications such as conversions, repainting, and much more available ⚡️ Fast delivery possible, including unloading Please provide postcode for a non-binding offer _____ ✅ We are happy to provide you with a tailor-made quotation.

Condition: new, Year of construction: 2025, empty load weight: 2,100 kg, total length: 6,000 mm, total height: 2,400 mm, 🚢 20ft Storage Container – As New (Year of Manufacture 2025 / 2026) – Immediately Available! High-quality shipping container in near-new condition – ideal as a storage space, workshop, site container, or for professional transport applications. ⭐ Your Benefits at a Glance 🆕 Year of manufacture 2025 / 2026 – as new Dodpfxorgp Iws Ad Neut 💪 Very robust steel construction (2 mm wall thickness) 🌧️ Wind and watertight 🔐 Secure lockable with 4-point door locking system 🚚 Supplied with CSC plate – suitable for worldwide transport 🌬️ Equipped with ventilation to prevent moisture 🪵 High-quality wooden flooring 🛠️ Forklift pockets integrated into the floor 📏 Dimensions & Technical Data 📐 External dimensions: 6,058 × 2,438 × 2,591 mm 📦 Internal dimensions: 5,898 × 2,350 × 2,390 mm 🚪 Door opening: 2,343 mm 🧱 Capacity: approx. 33 m³ ⚖️ Tare weight: approx. 2.25 t 🏋️ Payload: up to 30 t These containers impress with their durability, security, and versatility – ideal for commercial use, construction sites, trades, or demanding private applications. 📬 Enquire now – we will provide you with an individual quotation! 👀 Other container sizes and versions available. 🚛 Nationwide delivery within Germany possible (at additional cost).

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 000326, number of straightening rollers: 7, coil weight: 7,500 kg, coil outer diameter: 1,800 mm, coil inner diameter: 508 mm, product height (max.): 5 mm, number of feed rollers: 2, straightening roller diameter: 50 mm, sheet thickness steel (max.): 5 mm, coil width: 800 mm, Lg 35024 Belt conveyor in long design LORENZ BRM 50/820.7-HH7500.1 Coil weight max. 7500 kg Coil width max. 800 mm Material thickness 0.8 to 5 mm (steel with yield point approx. 300-350 N/qmm) Number of straightening rollers 7 Further data and detailed offer on request. Duodpfx Astrlzasd Net

Condition: used, Year of construction: 2005, Capacity Max turning diameter: ≈ 300 to 400 mm Max turning length: ≈ 600 to 1000 mm Swing over bed: ≈ 500 mm Spindle Spindle bore: ≈ 65 mm ← this matches the UP65 naming Chuck size: 200 to 250 mm Spindle speed: ≈ 3500 to 4500 rpm Spindle power: ≈ 15 to 22 kW Axes X travel: ≈ 200 to 250 mm Z travel: ≈ 600 to 1000 mm Rapid traverse: X: ~20 m/min Z: ~24 m/min Duedpfx Adjy Ewkqj Nst Tailstock Hydraulic tailstock Quill diameter: ~80 mm Quill stroke: ~100 to 150 mm Machine weight Around 4,500 to 6,500 kg

Condition: excellent (used), Year of construction: 1980, Karstens K11 1000 This Karstens K11 comes from a university environment and was only used very sparingly. All cables and hoses in the wet area have been replaced. It has extremely low operating hours. As we specialize in Karstens cylindrical grinding machines, we can offer you full service (electrical and mechanical) for the machine after purchase. Technical Data: Centre distance: 1000 mm Centre height: 180 mm Workpiece weight: 70 kg (between centers, cantilevered), 250 kg (between centers) Grinding wheel diameter: 400 mm Workpiece spindle: Morse Taper 4, infinitely variable speed 30–450 rpm, swiveling range 0–90° Tailstock: Morse Taper 4, quill stroke 45 mm Tailstock rest beside Z-axis table Quill force: 200–600 N Table swivel: 12.5 degrees Travel of infeed spindle: 80 mm Rapid traverse: 50 mm Coarse adjustment air cushion: 280 mm External grinding spindle motor: 4 kW Internal grinding spindle motor: 2.2 kW Workpiece spindle motor: 0.55 kW Machine weight: net 3,500 kg Infeed drive by DC motor Air cushion-supported rapid adjustment of the grinding spindle headstock for fast and safe positioning at the grinding station. Separate drives for spindles for external and internal grinding. Fully automatic operation cycle, feed movement controlled via rotary switch: Rapid advance, rapid retraction, grinding mode, feed stop, mym-feed adjustment. Automatic longitudinal grinding cycle Central coolant supply for all grinding stations Workpiece headstock with infinitely adjustable drive for rotating and lockable spindle. Infeed control for longitudinal grinding and plunge grinding, settings for retraction, feed amounts, feeds, spark-out times, idle strokes. Dujdpsh Rit Eofx Ad Njt Digital readout for X-axis by Heidenhain Paper band filter unit can be offered on request. Comparable to Weiss/ EMAG/ GP-cylindrical grinders/ Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat

Condition: like new (used), Year of construction: 2014, operating hours: 12,000 h, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, torque: 60 Nm, controller manufacturer: Siemens, controller model: 840D SL, total height: 2,390 mm, total length: 2,515 mm, total width: 1,700 mm, table load: 200 kg, overall weight: 3,500 kg, spindle speed (max.): 15,000 rpm, operating hours of spindle: 30 h, number of slots in tool magazine: 24, tool length: 200 mm, tool diameter: 80 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale is a CNC milling machine Spinner VC450 from 2014 in very well-maintained condition. Highlight: The machine is equipped with a new spindle with only approx. 30 spindle hours (no crash), professionally installed by the manufacturer Spinner – technically in excellent condition. Dsdjy Hf Nqspfx Ad Neut Used Tested and fully functional Ideal for precision machining – ready for immediate operation. ➡️ Additionally available: A comprehensive range of accessories can also be purchased, including machine vises, SK40 tool holders, and other equipment. Inspection and test run possible by appointment. If interested, please get in touch.

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 2,660 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 10,000 rpm, number of axes: 5, This 5-axis SPINNER U5-2520 was manufactured in 2016. It features an impressive X-axis travel of 2660 mm, Y-axis travel of 520 mm, and Z-axis travel of 460 mm. The machine is equipped with a spindle speed of 10,000 rpm and an automatic tool changer with 2x52 positions. If you are looking to get high-quality machining capabilities, consider the SPINNER U5-2520 vertical machining centre we have for sale. Contact us for further details. • B-axis: +110° / -90° • ATC: 2 x 52 tools Technical Specification Duodpfxey Efxij Ad Not Taper Size SK 40

Condition: new, Year of construction: 2020, Transnorm belt conveyor hinged belt diverter 3000x1120x1000 RA2286 Technical data: Conveyor length (NL): 3000 mm Belt body (NB): 1120 mm Belt width (GuB): 1000 mm Overall height/transfer height (BH): 1050 mm +100 mm adjustment range Minimum transfer height: 500 mm Maximum transfer height: 1600 mm Basic dimensions: 3000x1300 mm Tilt height difference: 1100 mm Conveying speed (v m/s): 1.5 m/s Lifting/lowering speed: 1.8 s /1.2 s Drive: Nord geared motor Electrical data: Conveyor belt motor: 50Hz V380-500, kW 1.5 / S1 Tilting motor: 50Hz V220/400, kW 3.0 / S1 Idler pulley (UR): Ø = 80/120 mm Drive drum (AT): Ø = 82 mm Year of construction: 2020 Optionally available: Frequency converter for stepless speed control Prices net plus ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Dodpfotp Tvwjx Ad Njut For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Lippert belt conveyor GF 28200-750-600 RA2248 Technical data: Duodpforknt Iex Ad Net Conveyor length (NL): 28200 mm frame width (NB): 750 mm belt width (GuB): 600 mm Overall height (BH): 120 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2008, Dematic belt conveyor 9824-500/400 Dropping conveyor with Center drive Built in 2008 Length incl. task band: 9,824 mm Width: 500 mm Belt width: 400 mm Elbows + backward belt nubbed belt Habasit Belt conveyor straight length: 2,507 mm Bow piece 1: 632 mm Backward belt length: 5.851 mm Submission belt smooth belt length: 733 mm, with exaggerated rubberized drive drum Drive: SEW 400 V, 0.75 kW 2.1 A RPM 13000, number of drive shaft RPM 68 Speed v = 0, 35m / sec. and 21 m / min. Duedpsk Aa Euefx Ad Not If necessary optional: 5 units, high-demand support Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor GKF 180°-750-550 IR1000 left RA1483 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Dujdpfx Adsk Abcre Net Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 4820 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 1000 mm Conveying angle: 180° degrees support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor SA37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2001 Special feature / Accessories: Lateral guides included on both sides Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, (CMZ TL20M) Spinner TS66LMC CNC lathe with C-axis FANUC 21i-TB with Manual Guide MAX. TURNING LENGTH: 600 mm LIVE TOOLS: Yes – 12 stations Main spindle specification: 12 kW, 4000 rpm, 46 Nm MAX. BAR DIAMETER: 66 mm MAX. TURNING DIAMETER: 400 mm Dusdpfx Aoy Ib A Aod Nst YEAR OF MANUFACTURE: 2006 Travel -X 240 mm, -Z 640 mm Equipment: 5 live tools (3/2), tailstock, tool presetter, parts catcher, chip conveyor. Very good condition.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: VT2155, SPINNER VC1150 Travel paths: X 1150 mm, Y 620 mm, Z 600 mm "Advanced" version Extra-heavy cross-slide construction for high-performance machining with patented guideway cover concept Ensuring optimal chip flow and a small machine footprint High-precision MILLING SPINDLE up to 14,000 rpm as built-in motor spindle, with direct drive (no belt), water cooling, M=117 Nm (S6 25%) P=22 kW (S6 25%) / SK40 TOOL MAGAZINE with 32 tool stations DIRECT MEASURING SYSTEMS on X/Y/Z axes CONTROL SYSTEM: FANUC 32iMB with the following basic functions: - Path control with Fanuc standard user interface - 15" LCD color monitor, Fanuc panel, full keyboard - User memory 1 MB, max. 1000 program numbers - USB interface - Ethernet interface - GE Fanuc cycle packages "Milling" for threading, deep drilling - 48 zero point offsets - 200 tool compensation pairs, tool life monitoring - Thread cutting without compensating chuck - Functions: helical interpolation + cylindrical interpolation - Functions: scaling, mirroring, coordinate system rotation - Parallel programming in background - Run time and piece counter - Inch-metric changeover - Electronic handwheel - Control language dialogue in German/English/French Rapid traverse in all linear axes: 48 m/min Dsdpfjykz Ddox Ad Neut CONVERSATIONAL PROGRAMMING Fanuc Manual Guide i UNIVERSAL CHIP CONVEYOR VC1150 Preparation of spindle for HIGH PRESSURE; operation with auxiliary tank up to 70/80 bar HIGH PRESSURE TANK 70 bar, with paper band filter Provision for SPINNER STANDARD PROBE Wireless SPINDLE PROBE Spinner-Blum STANDARD DOCUMENTATION IN GERMAN Operating voltage: 3x400 V +/-10% Line frequency: 50 Hz (+/-2%) TN system (5-wire) PACKAGING Notes: The price includes warranty services only within Germany. For new and demonstration machines, the images displayed are not necessarily of the individual machine but may be from comparable models. Accessories such as clamping devices or tool holders are only included if listed in the technical description. Please request a detailed ex-works quotation. Visit our factory near Munich or one of our showrooms. We may have other comparable machine offers available. Prior sale expressly reserved.

Condition: new, Year of construction: 2026, functionality: fully functional, SPINNER VC1150 Travel paths: X 1150 mm, Y 620 mm, Z 600 mm In “Compact” configuration Extremely robust cross-slide design for high-performance machining With patented guideway cover concept, providing uniquely optimized chip flow and a compact footprint High-performance MILLING SPINDLE up to 10,000 rpm with belt drive For exceptionally high torque Mmax = 119 Nm, Pmax = 16 kW Suitable for universal machining applications in mechanical engineering Tool interface at spindle: SK40 DIN69871 with pull stud DIN69872-A / ISO 7388-3-AD TOOL MAGAZINE with 32 tool stations SIEMENS 840DE control system including: - Operator panel adjustable in height and rotatable for optimal ergonomics - 19" LCD flat color display with multi-touch functionality - Includes engraving cycles Dujdexn R Daepfx Ad Njt - User memory 2 GB - 15 zero point offsets - 1 free USB interface - Standard Ethernet interface PORTABLE HANDWHEEL SHOPMILL 3D simulation of finished part REMAINING MATERIAL DETECTION DXF reader PROBING FUNCTIONS for integration of measuring probe UNIVERSAL CHIP CONVEYOR VC1150 SPINDLE PREPARATION FOR HIGH PRESSURE for utilization of auxiliary tank up to 22 bar Additional blow air at spindle head PREPARATION FOR SPINNER STANDARD PROBE STANDARD DOCUMENTATION IN GERMAN Operating voltage 3x400V +/-10% Line frequency 50Hz (+/-2%) TN system (5-wire) PACKAGING Notes: The price includes warranty services only within Germany. For new and demo machines, the images shown are not necessarily those of the individual machine, but are from similar machines. Depicted accessories such as clamping devices or tool holders are only included in the delivery scope if listed in the technical description. Request a detailed quote ex works. Visit our factory near Munich or one of our showrooms. We may have additional offers for comparable machines. Subject to prior sale.

Condition: new, Year of construction: 2024, operating hours: 25 h, SPINNER VC850 high-performance machining center Travels X850, Y510, Z510 mm in "Advanced" version with patented guide cover concept High-precision MILLING SPINDLE up to 12,000 rpm / 15.2KW / 97Nm (max) as in-line spindle with direct drive without belt Tool holder on spindle SK40 DIN69871 TOOL MAGAZINE with 32 tool stations MAGAZINE CLAP pneumatic in the working area DIRECT MEASURING SYSTEMS in X/Y/Z axis CONTROL FANUC 0i-F Plus with the following basic functions: - Contouring control with Fanuc iHMI user interface - Fanuc 15" LCD touch screen, - User memory 2MB, max. 1000 program numbers - USB interface for NC program data exchange, Ethernet interface - max. 4 axes can be interpolated simultaneously - 6+48 workpiece coordinate systems available - 400 tool compensation pairs, with tool life monitoring - with G-code & M-code guidance functions - Comprehensive Fanuc cycle package "Milling" as standard, as G-code and under MGi - e.g. tapping without compensating chuck, thread cutting and engraving. Helical and cylindrical interpolation functions - with scaling, mirroring and coordinate system rotation functions - Parallel programming in the background - Runtime and piece counter - Inch-metric changeover - Electronic handwheel as standard - Dialog language for control trilingual German/English/French UNIVERSAL CHIP CONVEYOR VC850 exiting the machine to the RIGHT PREPARING THE SPINDLE FOR HIGH PRESSURE to use the additional tank up to 22 bar HIGH PRESSURE TANK 22 bar with paper belt filter for flushing centrally through the spindle Dusdpfsk Raywsx Ad Net PREPARATION SPINNER-STANDARDMESSTASTER Blum Cordless SPINDELTASTER Spinner-Blum with tool holder suitable for the milling spindle ADDITIONAL HOOD on top for closed working area, required for high-pressure rinsing or highly atomizing processes or extraction STANDARD DOCUMENTATION GERMAN consisting of machine manual and CNC manuals supplied in digital form on the control unit. Paper manuals for an additional charge RING EYES for crane unloading, set consisting of 4 pcs. absolutely necessary for crane transportation STANDARD PAINTING two-colored in light grey RAL7035 and blue grey RAL5008 Electrical version EUROPA-STANDARD as follows: Operating voltage 3x400V +/-10% Mains frequency 50Hz (+/-2%) TN mains (5-wire) Remarks: The price includes warranty services only within Germany. For new and demo machines, the pictures are not necessarily the pictures of the individual machine but of comparison machines The accessories shown, such as clamping devices or tool holders, are only included in the scope of delivery to the extent listed in the technical description. Ask for a detailed offer ex works. Visit our factory near Munich or one of our showrooms. GGF we have other offers of comparable machines. Subject to prior sale.

Condition: as good as new (ex-display), Year of construction: 2020, functionality: fully functional, machine/vehicle number: VT2126, SPINNER VC1150 Travel ranges X1150, Y620, Z600 mm Execution variant: "Advanced" In particularly heavy cross-slide construction for high-performance machining With patented guide cover concept Resulting in uniquely favorable chip removal and compact footprint High-performance MILLING SPINDLE up to 10,000 rpm with belt drive For extremely high torque Mmax=200Nm, Pmax=29kW For use in universal machining in mechanical engineering / SK40 TOOL MAGAZINE with 32 tool stations DIRECT MEASURING SYSTEMS on X/Y/Z-axis FANUC 32iMB CONTROL with the following basic functions: - Contour control with Fanuc standard operating interface - 15" LCD flat color screen Fanuc operation panel, full-key - User memory 1MB, maximum 1000 program numbers - USB interface - Ethernet interface - GE Fanuc cycles “Milling” for threading, deep hole drilling - 48 work offset shifts - 200 tool correction pairs, tool life monitoring - Thread cutting without compensating chuck - With helical interpolation and cylindrical interpolation functions - With scaling, mirroring, coordinate system rotation functions - Background parallel programming - Run time and piece counter - Inch-metric changeover - Electronic handwheel - Control dialog language trilingual: German/English/French. DIALOG PROGRAMMING Fanuc Manual Guide i UNIVERSAL CHIP CONVEYOR VC1150 PREPARATION of spindle FOR HIGH PRESSURE for use of the auxiliary tank up to 70/80 bar PREPARATION FOR SPINNER STANDARD PROBE STANDARD DOCUMENTATION IN GERMAN Operating voltage 3x400V +/-10% Power frequency 50Hz (+/-2%) TN system (5-conductor) Djdpfx Ajykz Shod Njut PACKAGING Notes: The price includes warranty services only within Germany. For new and demo machines, the images are not necessarily the actual machines but comparable units. Depicted accessories such as clamping devices or tool holders are only included if listed in the technical description. Please request a detailed quotation ex works. Visit our facility near Munich or one of our showrooms. We may also have other offers for similar machines. Interim sale expressly reserved.

Condition: new, Year of construction: 2023, machine/vehicle number: VT0620, functionality: fully functional, operating hours: 174 h, High-Performance Machining Center SPINNER VC850 Travel ranges X850, Y510, Z510 mm "Advanced" configuration variant with patented guideway cover design Base machine configured as VC850-5A Duodpjw Auryefx Ad Not Including rotary-tilt table D=350mm High-performance milling spindle up to 12,000 rpm Power 22.6 kW / 108 Nm as built-in hybrid spindle with direct drive (no belt) This results in a particularly low machine height of only approx. 2,420 mm Spindle tool interface SK40 DIN69871 TOOL MAGAZINE with 48 tool stations MAGAZINE DOOR pneumatically operated within the work area DIRECT MEASURING SYSTEMS on X/Y/Z axes HEIDENHAIN TNC640 control, height adjustable, with angle-adjustable keypad: - Path control with 19" multi-touch screen in stainless-steel design PORTABLE HANDWHEEL HR510 FS "Advanced Function Set 3" option number 21 "CAD Import" option number 42 "KinematicsOpt" option number 48 "Advanced Function Set 1" option number 8 "Advanced Function Set 2" option number 9 "Touch probe functions" option number 17 Energy-saving function incl. automatic machine shutdown TNC 620 / TNC 640 Heidenhain software option "Heidenhain DNC" option number 18 Fully integrated 2-axis ROTARY-TILT TABLE SPRT-350 centrally mounted in the work area with: - Rotary table with faceplate D=350mm - Tilting range A-axis -110 / +46 degrees - Additional clamping plate approx. 200x350mm arranged to the left - Counter bearing to support the rotary table bridge - High-precision direct measuring systems centrally on both rotary axes - Hydraulic brakes per axis, holding torque 3,600Nm DUAL ROTARY FEEDTHROUGH in the center of the C-axis UNIVERSAL CHIP CONVEYOR VC850 discharging to the RIGHT from the machine PREPARATION of the spindle FOR HIGH PRESSURE for auxiliary tank use up to 70/80 bar HIGH PRESSURE TANK 70bar with paper band filter for central through-spindle flushing Blow air at the spindle head Compressed air centrally through the milling spindle Rinsing gun PREPARATION FOR SPINNER STANDARD PROBE Blum Wireless SPINDLE PROBE Spinner-Blum with tool interface matching the milling spindle Electrical PREPARATION FOR EXTRACTION AUTOMATIC DOOR for the workspace door Universal robot interface UNIROB I/O PACKAGE consisting of: 4 free M-functions with 2 PLC outputs I/O 24VDC 4 PLC inputs for feedback from the 4 M-functions Wired to terminal strip in the control cabinet STANDARD DOCUMENTATION 3D MODEL (CAM) LIFTING EYE BOLTS for crane unloading STANDARD 2-TONE PAINTING in light grey RAL7035 and blue grey RAL5008 Electrical design EUROPEAN STANDARD as follows: Operating voltage 3x400V +/-10% Mains frequency 50Hz (+/-2%) TN-system (5-wire) Notes: The price includes warranty services only within Germany. For new and demo machines, images may not necessarily represent the individual machine but rather comparable units. Depicted accessories such as clamping devices or tool holders are included only to the extent listed in the technical description. Please request a detailed ex works quotation. Visit our factory near Munich or one of our showrooms. We may also have similar machines available. Subject to prior sale.