Used Spray Glazer for sale (2,153)

Condition: good (used), Year of construction: 2023, CNC turning machine Manufacturer: DMG Mori Machine model: CLX 350 V3 Control system: SIEMENS Slim Line Multi Touch Year of manufacture: 2023 TECHNICAL DATA Travel distances - C-axis, degrees: 360 Spindle - Spindle head - Bar diameter: (mm): 66 - Max. speed: (rpm): 5,000 - Drive power 100% duty cycle: (kW): 11 - Drive power 40% duty cycle: (kW): 16.5 Turret - Tool positions: 12 - Tool positions for driven tools: 12 - Tool holder: VDI30 Tailstock - Hydraulic, controlled via M-function EQUIPMENT FEATURES + C-axis + Through-hole chuck, diameter 65 mm (max.) + Direct measuring system for the X-axis + Chip conveyor + Electronic handwheel + 3-jaw chuck, diameter 210 mm (hydraulic) + DMG Mori IoT connector Ksdpfoz Sa Svex Ag Aodu + Coolant spray nozzle, 5 bar + Hydraulic tailstock + Tool package - Chip conveyor not included Subject to changes and errors in the technical data and specifications.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,480 kg, maximum load weight: 34,520 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 7,450 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Year of construction: 2026, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Semi-Trailer Container Chassis Fine-grained steel welded construction, semi-trailer plate with replaceable 2 kingpins and 2 kingpin positions Front locking mechanism on tipper ram mounting block with guide wedges on both sides, rear locking mechanism on continuous rotary shaft with spring return Without subframe for self-supporting containers Container mounts: Locking cross members, double-mounted for securing 1 x 20-foot container (Note: low fifth-wheel load for 20-foot containers) 24 metric tons, 2-speed support jack, single-sided operation, with straight lower section, without thrust compensation Clear support foot corner dimension or clear rear swing radius approx. 1850 mm Kdedpfez R Tr Sox Ag Asu 2 wheel chocks with holders Half-shell fenders with anti-spray flaps per EC standards Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK Screw coupling, fixed part, nominal diameter 48 mm. (without hose connection) Hydraulic operation via truck auxiliary power unit Hydraulic connection with hose and HDK screw plug, nominal diameter = 48 mm, with knurled nut Axles + Suspension 3 SAF disc brake axles with 430 mm disc diameter Laser-measured axles/chassis to reduce tire wear and fuel consumption Offset wheelbase mm (combined transport) up to 44to Gross train weight Air suspension. Brake System 2-line compressed air brake system Color-coded lines for easy servicing. Spring-loaded parking brake 2 non-reversible coupling heads at the front, without connecting line EBS, Electronic Brake System with EBS socket at the front, without connecting cable Caution: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, for display in the cab; the truck must be equipped accordingly; no truck installation required (no calibrated scale) Wheels and Tires 6 385/65 R22.5 (manufacturer’s choice) 6 steel rims, factory silver Electrical System 24 volts, multi-chamber lights, yellow LED side lighting 2 white front position lights 2 white/red rear lane-keeping lights 2 x 7-pin reverse-proof sockets in front, without connecting cables Country of Registration/License Plates Germany With DEKRA approval and inspection report (in accordance with §13 EG - FGV) 24/7 Service Hotline Prepared for single-line license plate holder Contour markings with reflective strips per ECE R 048, white on the sides and red at the rear Paint finish Frame: colour of choice 10-year warranty against rust-through Support feet: Black coated Note: Archive images!

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with joint milling unit including DIA tools, joint thickness up to 40 mm, workpiece thickness up to 3 mm, combined milling station, radius R 2.5 mm. Technical description: with hot melt adhesive application to the workpiece for edge material up to 3 mm. 60 mm workpiece thickness without joint unit, 40 mm workpiece thickness with joint unit, maintenance-free, coated adhesive reservoir, HF trimming station (16,000 rpm) for front and rear edge overhang, HF milling station (16,000 rpm) with replaceable blade milling cutter (combined design) and fine milling adjustment from the operator side, free spaces for additional processing units (Hebrock system), feed rate approx. 10 m/min, cutting depth adjustment of the trimming saw, signal lamp for workpiece sequence, robust chain drive, ergonomically arranged control panel, double roller pressure beam, unit viewing windows from the rear and operator side of the machine, PLC control including touchscreen. Technical data: - Feed speed 10 m/min. - Board thicknesses from 8 - 40 mm - Weight: depending on the equipment, approx. 1550 kg - Dimensions (L x W x H) 5250 x 1445 x 1600 mm Airtronic incl. cooling and antistatic spraying device 2014, 1 unit Hot air unit for creating an optical zero joint using special edge materials designed for this purpose. - including pneumatic adhesive reservoir positioning - including cooling and antistatic spraying device - including 2 additional edge channels in quick-change design - including special version corner rounding milling cutter, maximum workpiece thickness 60 mm and minimum workpiece length 200 mm - exclusively for Hebrock edge banding machines of the 3000 series Ksdpex S Hmzsfx Ag Ajdu - retrofitting possible later - additional costs upon request Technical data: - max. board thickness 40 mm - max. edge thickness 1.2 - 2.0 mm - 7 - 10 m/min feed speed - Air consumption approx. 280 - 580 l/min (only Airtronic), electronically controlled - ready for operation after approx. 2 min Upgrade to 8 mm edge thickness, 1 unit, up to a maximum of 40 mm workpiece thickness including pneumatic saw adjustment special version, minimum workpiece thickness 8 mm, 1 unit 3-point pneumatic milling adjustment, 1 unit Switching between radius - chamfer - flush for the combined milling stations. This eliminates the manual adjustment at the combined milling station for the 3rd stop point. PLC control is essential. Cleaning station (wiper), 1 unit Corner rounding milling cutter, 1 unit, including combined tool and pneumatic adjustment for chamfer/radius, maximum workpiece thickness 40 mm, minimum workpiece length 300 mm, radius R 2.0 mm. Radius pull blade, 1 unit, including pneumatic feed device, radius R 2.0 mm. Flat pull blade, 1 unit, with pneumatic feed control. Chassis complete, 1 unit Adhesive station change system including adhesive outlet device downwards, in preparation, 1 unit, without 2nd adhesive reservoir. - including the possibility of processing PU adhesive with the machine Dado cutter unit, vertical, in the board, 1 unit, including pneumatic feed device. Vertical dado, groove width 8.2 mm, groove depth 8.0 mm, distance from the workpiece edge 14.0 mm Special version, dado cutter motor with higher motor power, 1 unit Internal extraction of the joint unit, 1 unit, at the extraction manifold of the machine Ball bearing for corner rounding milling cutter 24.1 mm, 1 unit Ball bearing for corner rounding milling cutter 24.2 mm, 1 unit Release agent spraying dev

Condition: used, Year of construction: 2017, Technical details: operating pressure: 12 bar container volume: 200 l Total weight, approx.: 220 kg Kjdpfxevvvrpe Ag Aedu dimensions L x W x H: 1,2 x 1,1 x 1,8 m Mobile pressure blasting pot - Sand blasting system Blasting tank pressure up to 12 bar Test pressure 17.2 bar Ideally equipped with: -with remote control valve -with remote control lever -with electro-pneumatic remote control -with carbide spray nozzle incl. 10 m nozzle hose i.D. *

Condition: used, Year of construction: 2023, Overview Single-module tunnel warmer by TMCI Padovan (SAP-Blendtech), built in 2023 for filled beverage cans. The machine brings cold-filled cans from 5 °C to 25 °C with a 40 °C water spray over a treatment surface of 9 m², at an output of 35,000 cans per hour. It was configured for 0.33 l and 0.15 l cans. The tunnel body, frame and pipework are stainless steel. The machine is steam-heated, with a multi-tubular heat exchanger for condensate recovery, and a Siemens PLC with teleservice and a touchscreen HMI runs the process. The machine is currently installed and was seen in operation. Technical details - Year of manufacture: 2023 - Output: 35,000 cans/h - Can sizes: 0.33 l and 0.15 l, diameter 58.4 mm and 53.3 mm - Treatment surface: 9 m², single deck, 1 module - Treatment time: min. 4.5 minutes - Product temperature: 5 °C inlet, 25 °C outlet - Spray water temperature: 40 °C - Steam consumption: approx. 508 kg/h at 3 bar - Make-up water: approx. 1 m³/h - Instrument air: approx. 500 Nl/h at 6 bar - Installed power: 9 kW - Electrical supply: 400 V, 50 Hz - Conveyor height: 1,200 mm ± 30 mm - Footprint: approx. 6,300 mm long, 2,450 mm wide (3,030 mm including side piping) - Height: approx. 1,800 mm - Service clearance: 800 mm around the machine - Connections: water inlet 15-20 °C max. 2 bar, steam 3 bar, air 1/2" at 6 bar, basin overflow DN 100, basin drain 1 1/2" BSP Equipment - Single-deck tunnel warmer, 9 m², 1 module - Multi-tubular heat exchanger for condensate recovery - 1.1 kW blower for water recovery Ksdpfjz Sp Ansx Ag Asdu - Tank with condensate booster pump - Air conditioning unit - Active infeed and outfeed conveyor - Side inspection windows on the spray zone - Siemens PLC with teleservice, touchscreen HMI with process overview - Profinet port, cycle pause and auxiliary start buttons, emergency stop, main switch, signal tower Condition and availability - Built in 2023, currently installed and in operation - Layout drawing available - Availability on request - Location: Albania

Condition: used, Year of construction: 2008, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 400 mm, spindle speed (min.): 50 rpm, spindle speed (max.): 1,500 rpm, type of input current: three-phase, input voltage: 400 V, Equipment: rotational speed infinitely variable, A used, well-maintained, CNC-controlled drilling and tapping machine with a moving column, equipped for drilling, countersinking, and thread cutting, featuring: - 7-position tool changer - Micro-spray system - Internal coolant supply - Automatic tool length measurement - 5 pneumatic clamping cylinders - Documentation - Programming guide Drilling capacity in steel ST60: up to a diameter of 40 mm without pre-drilling Thread cutting in ST60: up to M30 Spindle speeds: 50-1500, freely programmable Tool holder: BT40 Ksdpfjz S Rfdox Ag Ajdu Travel distances X/Y/Z: 6000/650/400 mm Feeds: 0.01 to 1.5 mm/rev Rapid traverse speed in X/Y/Z: 18/8/5 m/min Technical data and dimensions subject to change.

Condition: used, Year of construction: 2015, turning diameter max. 500 mm turning length 800 mm control sl Operate 3G ShopTurn Siemens swing diameter 500 mm distance between spindles 1.020 mm turning speed range - main spindle max. 5.000 min/-1 power capacity - main spindel 25 / 34 kW max. Torque 280 / 380 Nm spindle head 170h5 spindle diameter in front bearing 130 mm spindle bore 87 mm C-Axis 0,001 ° tool taper HSK 63 A number of toolpositions 80 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 120 mm max. tool weight 12 kg max. tool length 300 mm Speed Milling Spindle max. 12.000 min/-1 power capacity - milling spindle 19 / 22 kW Torque 85 / 100 Nm tool taper HSK 63 A B-Axis +/- 110 ° x-axis -10 ... +490 mm y-axis +/- 100 mm z-axis 1: 845 mm z-axis 2: 600 mm z-axis 3: 800 mm Kodez S Nygepfx Ag Asdu Spindle speed range subspindle max. 6.000 min/-1 power capacity - Sub spindle 20 / 27 kW bar material dia. 51 mm spindle bore diameter 73 mm spindle diameter in front bearing 100 mm C-Axis 0,001 ° total power requirement 85 kVA weight of the machine ca. 10,0 t dimensions of the machine ca. 7,0 x 2,9 x 2,6 m CNC - Turning- and Millingcenter DMG MORI - CTX beta 800 TC V6 - 5-axis simultaneous machining - Main and counter-spindle - Swivel-type milling spindle - ShopTurn - Off-center turning and milling - Multi-thread cycle - Program state control - Tool sorting cycle - Easy Tool Monitor for Siemens control system - Chuck flushing system for main spindle - Chuck flushing system for counter-spindle - Differential pressure clamping - Coolant supply through the counter-spindle - Bar machining package for CTX beta (77 mm capacity) Workpiece the-take-off device (left side) Hydraulic hollow clamping system 4-color signal tower Interface for bar feeder or bar magazine - In-process workpiece measuring system (Renishaw) - Safety window cleaning system - Coolant spray gun

Condition: used, Variant B) 2 fixed elastic loops for fastening behind the ears (without ties) Large pack, ideal for your customers, employees, or for resale! The white face mask is made of 100% cotton or a blend of 80% cotton and 20% polyester (depending on fabric availability; no difference in quality; please inquire if necessary). The antibacterial effect is ensured by the final treatment of the fabric through the deposition and fixation of a reaction mixture of titanium dioxide and silver chloride. Lightweight, single-layer, high-quality high-tech material for easier breathing than with double or triple layers. DISINFECT BEFORE FIRST USE!!! Wash at 60 °C if soiled and iron with a hot iron. Disinfect the mask regularly! Disinfection options: 1. Spray the product with a disinfectant. 2. Iron with a hot iron. Dirty face masks can also be disinfected with a hot iron. 3. Place in an oven preheated to 60 °Celsius for 60 minutes. 4. Expose the mask to UV radiation for 1 hour. Dimensions: 18 x 19 cm. Sales unit: 50 pieces in a bag. Hygiene item - not subject to exchange! Kjdpfx Agsz Tnz Ss Aodu WARNING: Not a medical device! These face masks are not certified according to protection classes and are therefore not suitable for intensive care areas!

Condition: used, Electric chain hoist CPV, lifting capacity 250 kg, main lift 8 m/min, FEM group 1, with mobile frame · Robust design for a wide range of applications · Standard operating voltage: Euro voltage 400/50/3 V/Hz/Ph · 42 V contactor control · Motor in protection class IP 55, encapsulated control switch in protection class IP 65, with additional emergency stop protection · Integrated limit switch for the highest and lowest hook position · Motors protected against the ingress of dust and spray water according to protection class IP 55 in accordance with VDE 0530 · Safety slip clutch adjustable from the outside · Electromagnetic spring-loaded brake holds the load securely even in the event of a power failure · Chain guide made of low-friction, thus low-wear, fiber-reinforced polyamide Kdedpfxoz Tutnj Ag Asu · Lifting height 3 m · Suitable for flange width 58-180 mm, FEM classification (full-load service life hours): FEM 1Am = 800 hours. Other load capacities, lifting heights and 2 travel speeds available on request. · Other technical features: FEM group 1 Am · Lifting height: 3 m · Voltage: 400/50/3 V/Hz/Ph · Main lift: 8 m/min · Subject to testing: yes

Condition: used, Belt Treatment 2901, yellowish, 400 ml spray can, OKS · Increases belt tension · Prevents slippage · Protects the belt from drying out and wear · Extends service life · Eliminates squealing · Universally applicable for all V-belts, round belts, and flat belts · Further technical specifications: · Content: 400 ml · Color: yellowish · Temperature: up to +80°C Kdsdjz Twkvspfx Ag Aou · Packaging: spray can

Condition: used, Water hose TRIX ROTSTRAHL® L.40m ID 13mm OD 19mm RL 40m CONTINENTAL · Reinforcement: synthetic yarns Kdjdpfxsz Twlms Ag Aju · Highly flexible and robust cover: EPDM, resistant to ozone and UV radiation · From DN 28, fabric-patterned outer layer; up to DN 25, free of release agents, separating agents, and grease. Lining: EPDM inner layer, smooth, pore-free, black, low flow resistance Temperature range: -40 °C to +100 °C Marking: 6 red, axially running stripes on a black background, “Continental ContiTech TRIX-ROTSTRAHL® DN 13 PN 20 BAR / 290 PSI Made in Germany” Application: Water hose for commercial use, municipal operations, civil engineering, industry, landscaping and gardening, agriculture, and many other areas. Due to its design and construction, it is highly flexible, robust, ozone-resistant, and weather-resistant. The ideal hose for cleaning, irrigation, filling, spraying, rinsing, and emptying. · Other technical properties: Bending radius: 50mm · Weight: 0.245 kg/m · Physical state: Liquid

Condition: used, Multi-purpose spray nozzle D, quick-release coupling, KARASTO · D-industrial version – spray nozzles according to DIN 14365, made of light metal · Hand protection and 2-part mouthpiece, made of plastic · with GEKA connection, made of brass · suitable for hose sizes from 10 mm (3/8") to 38 mm (1 1/2") · quick-release lever for full jet, spray jet, and stop Kedpfx Agsz Tggyo Asdu · stepless flow rate adjustment · can be unscrewed · particularly recommended for irrigating large areas · Water consumption: full jet = approx. 1.5 m³/h with nozzle bore Ø 4 mm · Spray jet = approx. 10% less · Further technical features: Throw distance, full jet: approx. 15 m

Condition: used, CARAMBA High-performance drilling/cutting oil foam, 500 ml spray can Kedpfsz Tmq Sex Ag Aedu · Protects tools and materials · Highly adhesive foam · Miscible with all water-based coolants · For cooling and lubricating during drilling, cutting and milling · Suitable for alloyed and unalloyed steel, cast iron, chrome-nickel alloys, copper and its alloys · Mineral oil and sulfur-free · Washable with water · Spray onto a dry surface and allow to air briefly · Other technical properties: Color: yellowish · Material compatibility: Iron, non-ferrous metals, steel, cast iron, copper, chrome-nickel alloys

Condition: used, Rust remover ROST FLASH 500 ml spray can, CRC Kdsdpoz Tmcbjfx Ag Aju · with cold shock effect · twice as effective against rust · a coolant freezes the sprayed surface down to -40 °C, thereby breaking down the structure of rust and dirt · the finest cracks and gaps are created, allowing the penetrating oil to penetrate faster and deeper · friction is reduced, and stuck screws, bolts, slides, etc. can be easily loosened · acid and silicone-free, leaves a fine protective film and thus prevents future rust formation · Other technical properties: Color: yellowish brown · Temperature: up to -40°C · Packaging: spray can

Condition: used, functionality: fully functional, machine/vehicle number: WSK00000001260445, empty load weight: 5,820 kg, maximum load weight: 26,680 kg, overall weight: 32,500 kg, axle configuration: 2 axles, permissible axle load (axle 1): 18,000 kg, permissible axle load (axle 2): 18,000 kg, first registration: 08/2011, loading space volume: 25 m³, total length: 8,640 mm, total width: 2,550 mm, total height: 3,570 mm, suspension: air, tire size: 385/65 R22,5", color: yellow, Attention: archive images! The vehicle may currently be in use! Kodpfjz Tzqyex Ag Asdu #Chassis tipper semi-trailer - Fine-grain steel welded construction - 2 drop-leg landing legs with round feet - 2 wheel chocks with holder - Rear underrun protection, folding - Half-shell mudguards on all axles - Anti-spray mudflaps on last axle only - 1 aluminium hook-on ladder with holder, at the side - 1 shovel #Axles + suspension - Disc brake axles - Air suspension #Braking system - 2 non-interchangeable coupling heads at front, without connecting line #Wheels and tyres - 385/65 R22.5", make at manufacturer's discretion - Steel rims, make at manufacturer's discretion #Electrics - Multi-chamber lights, amber LED side lighting - 2 white/red outline marker lights at rear - 2 x 7-pin sockets at front, without connecting cable - 2 additional LED work lights at rear #Hydraulics - High-pressure cylinder - Hydraulic operation via truck PTO - Hydraulic connection with hose #Bodies - Steel half-pipe body, inclined front wall with hydraulic cylinder mount, internal access steps on the right in direction of travel - Rear wall as pendulum tailgate - Cramaro sliding cover "Cabriole", automatic rear closure as folding bow. Cover structure begins ahead of the body opening. Cover with electric drive, tractor unit socket supplied loose, operation on the semi-trailer and by radio remote control. Note! Outer width of 2550 mm is exceeded by cover attachments. This is accepted in most EU countries! Observe the registration regulations of the respective country #Paintwork - Frame: grey - Landing legs: black coated - Body: yellow with lettering - Cramaro cover: yellow

Condition: used, High-performance rust remover Rasant, 500 ml spray can, CARAMBA · High-performance rust remover · Excellent penetrating power, dissolves heavily rusted metal parts Ksdpfxoz Tza Io Ag Aodu · Effective against adhesive residues, dirt crusts and resinification, silicone-free · Other technical properties: Color: yellow-brown · Packaging: Spray can

Condition: used, Electric chain hoist CPV, lifting capacity 500 kg, main lift 8 m/min, FEM Group 1, with mobile trolley · Robust design for a wide range of applications · Standard operating voltage: European standard 400/50/3 V/Hz/Ph · 42 V contactor control · Motor with protection class IP 55, encapsulated control switch with protection class IP 65, with additional emergency stop protection · Integrated limit switch for the highest and lowest hook positions Kdjdpfx Agez Tybde Asu · Motors protected against dust and spray water ingress according to protection class IP 55 according to VDE 0530 · Safety slip clutch adjustable from the outside · Electromagnetic spring-applied brake securely holds the load even in the event of a power failure · Chain guide made of low-friction, wear-resistant glass fiber reinforced polyamide · Lifting height: 3 m · Suitable for flange width 58-180 mm. FEM classification (full-load service life in hours): FEM 1Am = 800 hours. Other lifting capacities and lifting heights available upon request. · Further technical specifications: FEM Group: 1 Am · Lifting height: 3 m · Voltage: 400/50/3 V/Hz/Ph · Main lift: 8 m/min · Subject to mandatory testing: yes

Condition: used, Type: Piston pump; Capacity: 15 liters; Spray pressure: 6.0 bar; Empty weight: 4.6 kg; Spray lance: 50 cm. Kodpfx Aez T Rzhsg Aedu

Condition: used, Water hose TRIX ROTSTRAHL® L.40m ID 19mm OD 27mm RL 40m CONTINENTAL · Reinforcement layer: synthetic yarns · Highly flexible and robust cover: EPDM, resistant to ozone and UV radiation · From DN 28, the outer layer has a fabric pattern; up to DN 25, it is free of release agents, separating agents, and oils. Lining: EPDM inner layer, smooth, pore-free, black, low flow resistance. Temperature range: -40 °C to +100 °C Marking: 6 red, axially running stripes on a black background, “Continental ContiTech TRIX-ROTSTRAHL® DN 13 PN 20 BAR / 290 PSI Made in Germany” Application: The water hose for commercial enterprises, municipal services, civil engineering, construction, industry, landscaping and gardening, agriculture, and many other applications. Due to its design and construction, it is highly flexible, robust, ozone-resistant, and weather-resistant. The ideal hose for cleaning, irrigation, filling, spraying, flushing, and emptying. · Other technical specifications: Bending radius: 65mm · Weight: 0.435kg/m Kjdpfx Asz T I T Ieg Aodu · Physical state: Liquid

Condition: used, Variant B) 2 fixed elastic bands for fastening behind the ears (without ties) Large pack, ideal for your customers, employees, or for resale! This face mask works on the basis of filtration with an efficiency of 80-93%. The lifespan depends on the air pollution and how it is used. The NANO face mask is intended for reuse. It is a fine non-woven fabric with a membrane inside, which requires gentle handling. Lightweight, single-layer, high-tech material that is comfortable to wear and allows for easier breathing (also for asthmatics) than with double or triple layers. Contaminants are filtered out and not inhaled. Kedpfx Aoz T Sxzog Asdu DO NOT WASH OR IRON!!!!! DISINFECT BEFORE FIRST USE! Wipe away dirt with a damp cloth. Please disinfect regularly! Disinfection options: 1. Spray with a disinfectant. 2. Use hot steam from an iron at a distance of approximately 5 cm. 3. Boil in water. 4. Place in an oven heated to 60°C for 60 minutes. 5. Expose the mask to strong UV radiation for 1 hour. Hygiene item, therefore not eligible for exchange if the packaging has been opened! ATTENTION: Not a medical device! These face masks are not certified according to protection classes and are therefore not suitable for intensive care areas!

Condition: used, Electric chain hoist CPVF, capacity 1000 kg, main lift speed 8 m/min, FEM Group 1, with trolley · with 2 lifting speeds · robust design for a wide range of applications · standard operating voltage: Euro voltage 400/50/3 V/Hz/Ph · 42 V contactor control · motor in protection class IP 55, encapsulated control switch in protection class IP 65, with additional emergency stop protection · integrated limit switch for the highest and lowest hook position · motors protected against the ingress of dust and spray water according to protection class IP 55 in accordance with VDE 0530 Kjdpfxjz Ub T Ro Ag Asdu · thermal overload protection, externally adjustable safety slip clutch · electromagnetic spring-applied brake securely holds the load even in the event of a power failure · chain guide made of low-friction, therefore wear-resistant, glass fiber reinforced polyamide · lifting height 3 m · suitable for flange width 58-180 mm · FEM classification (full-load service life hours): FEM 1Am = 800 hours · Other load capacities and lifting heights available upon request. · Further technical specifications: · Fine lift speed: 2 m/min · FEM Group: 1 Am · Lifting height: 3 m · Voltage: 400/50/3 V/Hz/Ph · Main lift speed: 8 m/min · Subject to mandatory testing: yes

Condition: used, High-performance rust remover, 400 ml, NSF H2 spray can, Smart Straw™ WD-40 SPECIALIST · Powerful and fast-acting · Penetrates and loosens stuck parts, while also being extremely water-repellent to protect against further corrosion · Suitable for metal, alloys, rubber, plastics, and most paints · Temperature range: -20 °C to +90 °C Kdodpfoz Ub N Eex Ag Aeu · NSF H2 registered (Reg. No. 145375) · Other technical properties: Color: cloudy beige · Temperature: -20 °C to +90 °C · Packaging: Spray can with Smart Straw™

Condition: used, High-performance graphite oil, 500 ml spray can, CARAMBA · Rust remover, lubricant, corrosion protection, cleaner · Effective from -30°C to +450°C · Resistant to pressure and heat · Good lubricating properties under high pressure (VKA value: 1200N) · Higher lubricating performance at increased temperatures Kdsdpfxez Uck Rs Ag Aou · Ideal lubricating effect for humid environments · Electrically conductive · Silicone-free · No resin formation

Condition: used, Anti-Seize Assembly Paste 400 ml, anthracite, spray can, WEICON · Protective, separating and lubricating agent for heavily stressed parts · Optimally matched solid content and selected additives enable a wide range of applications · Protects against corrosion, seizing and wear, stick-slip phenomena, oxidation, fretting corrosion and electrolytic reactions ("cold welding") Kdjdpfxoz Uk A Io Ag Aeu · Has an exceptionally good separating effect · Other technical properties: Temperature resistance: -180 to +1200 °C · Type: ASA 400

Condition: used, The PERZL KDG box rotator for forklifts is manufactured in a heavy-duty and robust design and features a sturdy rotary bearing. It is compatible with all forklifts and pallet fork carriers with a fork carrier height of 407 mm (ISO FEM II) and has a carrier width of 1050 mm. The device can rotate continuously and enables both clockwise and counterclockwise rotation via a worm gear. It is equipped with hoses and a coupling and has a load capacity of up to 2,000 kg with a self-weight of 180 kg. Optionally, it can be ordered with an insertable third fork (. 1001) to provide lateral support for boxes during rotation. This quality product is manufactured in Germany. - Box rotator ISO FEM II, heavy-duty, robust design with a heavy-duty rotary bearing - Can be attached to all forklifts/pallet fork carriers with a fork carrier height of 407 mm (ISO FEM II) Kdodpoz Uk I Dofx Ag Asu - Carrier width 1050 mm - Continuous rotation, clockwise and counterclockwise rotation via a worm gear - Hoses and coupling - Load capacity: 2,000 kg - Self-weight: 180 kg - Available with an insertable third fork on request (optional, . 1001) - Quality product manufactured in Germany Delivery without forks; forks available upon request!