Used Stama Mc 535/Twin for sale (5,037)

Condition: used, mileage: 21,800 km, first registration: 06/1999, fuel type: diesel, axle configuration: 4x4, fuel: diesel, color: other, suspension: steel, Year of construction: 1999, Equipment: electric window regulation, power assisted steering, = Additional options and accessories = - Hub Reduction - Sper = Remarks = Renault Thomas Sides BS13, 1999, 21,800 km Original!, 4x4 with reduction axles, Nwedpfxoy Awlij Ag Dof Fully leaf sprung, Double engine, Cannon can be operated from inside, No registration = More information = Suspension: leaf suspension Front axle: Steering; Reduction: hub reduction Rear axle: Double wheels; Reduction: hub reduction Number of cylinders: 6 = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Year of construction: 1999, condition: excellent (used), machine/vehicle number: 167, Format (cm): 58 Equipment / Additional information: Njdpfx Ashu R U Dsg Dowf 1xreserve knife Very good condition // tested, checked and revised

Condition: new, new ! all stainless steel 2 speeds (20 and 40 rpm) 2 mixing directions 3,7 / 4,5 kW inspection gantry Njdey Alnxopfx Ag Djwf safety lid CE-approved overall dimensions (l x w x h) : ± 1.970 x 1.000 x 1.750 mm (open lid: H: 2.250 mm) infeed height : ± 1.450 mm Suitable for loader with “Easy Connect” dimensions drum : (l x w x h) : ± 1.000 x 765 x 665 mm + Loader for eurobins

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, power: 375.1 kW (509.99 HP), year of last overhaul: 2026, Mobile shredder DOPPSTADT AK 535 compact Fine shredding basket; hole-size can be agreed. Foldable discharge conveyor with magnetic head pulley (magnet roll) Nwedjy A Iv Ejpfx Ag Def Twin-drive (separate drives for infeed roller and scraper floor) Hydraulically self propelled drive (for moving on site) Radio remote control

Condition: used, Year of construction: 2013, turning diameter . mm Njdpfjvu E R Ssx Ag Dowf turning length 2000 mm control Siemens 840 D sl mainspindle: turning speed max. 3800 1/min mainspindle: torque max. 1200 Nm diameter of quill 140 mm center point MK6 quill power 5 - 30 kN feed rate Z-axis mm/min rapid traverse Z-axis 40 m/min feed rate X-axis - mm/min rapid traverse X-axis 25 m/min total power requirement 125 kW weight of the machine ca. 20 t The machine can still be inspected under power at the production plant. The condition of the machine is good, the accuracy during turning operation is very good. The milling drive is not functional. A quotation from Niles for the repair of the milling drive is available on request. Including hydraulic steady rest.

Condition: excellent (used), functionality: fully functional, Twin-Screw Extruder / Twin-Screw Kneader COLLIN ZK 25 For sale is a COLLIN ZK 25 twin-screw extruder in a compact laboratory or technical center design. The machine is ideal for trials, compounding, product development, as well as smaller-scale production applications. The extruder features a screw diameter of 2 x 25 mm with a process length of 36 D (6x6 D). Depending on the configuration, screw speeds of 460 / 600 / 800 min⁻¹ are possible. The drive power is 9.7 / 12.5 / 16 kW. The maximum melt pressure is 320 bar, and the maximum melt temperature is 400 °C. The machine is equipped with multiple heating zones. Barrel heating is 1 x 850 W plus 5 x 1200 W, and nozzle/adapter heating is 600 W. Water cooling is available, and temperature control is provided for zones 1 to 6, with water cooling connected via hose. Nwsdpjy A H Umefx Ag Def Technical Data: • Manufacturer: COLLIN • Model: ZK 25 • Design: Twin-screw extruder / Twin-screw kneader • Screw diameter: 2 x 25 mm • Screw length: 36 D • Screw speed: 460 / 600 / 800 min⁻¹ • Max. melt pressure: 320 bar • Max. melt temperature: 400 °C • Weight: approx. 550 kg • Dimensions: • Length: approx. 2,100 mm • Width: approx. 600 mm • Height: approx. 1,900 mm • Screw center height: approx. 1,100 mm Electrical Data: • Connection: 3 x 400/230 V, 50/60 Hz • Power supply: L1 / L2 / L3 / N / PE • Fusing: 3 x 50 A • Max. connected load with downstream units: 30 kW Applications: Ideal for laboratory usage, technical centers, R&D, test series, compounding, and material testing.

Condition: used, Year of construction: 2021, machine/vehicle number: PB017, operating hours: 335 h, Max. load capacity: 2,820 kg, max. working radius: 820 cm, hook height approx. 870 cm, max. lifting height. Battery type: lithium-ion, dimensions (L/W/H) approx. 280-332x75x147 cm, fully electric drive with lithium-ion battery, variable motor 7.5 kW AC 30 V, own weight approx. 1,995 kg Nedpfoy D Tyfox Ag Dowf

Condition: ready for operation (used), Year of construction: 2012, travel distance X-axis: 1,100 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: SIEMENS, controller model: 840D sl, total height: 2,800 mm, number of axes: 5, This 5-axis HELLER MC 20 was manufactured in 2012. It features an impressive X-axis travel of 1100 mm, Y-axis travel of 1100 mm, and Z-axis travel of 1000 mm. The machine is equipped with a Siemens 840D sl control unit and has a maximum fixture height of 1980 mm. If you are looking to get high-quality machining capabilities, consider the HELLER MC 20 horizontal machining centre we have for sale. Contact us for further details. Nodpfx Agey Dd Hce Djwf • Voltage: 400 V (3~) • Frequency: 50 Hz • Nominal current: 42 A • Interference circle: Ø1260 mm • Maximum fixture height: 1980 mm • Table height from floor: 1100 mm • Suction connection: Ø265 mm Technical Specification Taper Size HSK 100

Condition: excellent (used), Catalogue number 7865 TECHNICAL DATA - max blade diameter: 315mm - spindle diameter: 30mm - blade guard included - max cutting height: 40mm - min saw spacing: 180mm - max saw spacing (edge-to-edge): 2400mm - manual saw spacing adjustment - main motor power: 2x3kW - feed motor power: 0.74kW - feed with inverter + forward/backward - overall dimensions (LxWxH): 3300x1000x1600mm - weight: 250kg ADVANTAGES – Made in Poland Nsdpfxex U Tvho Ag Dswf – Manual saw spacing adjustment – Very good condition – Unpainted – Double-saw, used Net price: 7,900 PLN Net price: 1,880 EUR based on exchange rate 4.2 EUR (Prices may change with major rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7881 Technical data: - Cutting height: 30-200mm - Max saw blade diameter: 350mm - Spindle diameter: 70mm - Max cutting width of wood: 500mm - Working width of arbor with saws: 400mm - Minimum length of cut wood: 1000mm *Top: - Anti-kickback devices - 4 toothed feed rollers – pneumatically pressed *Bottom: - Sliding roller - Anti-kickback devices - Toothed feed shaft, 2 pcs - Arbors with saws - Toothed feed shafts, 2 pcs - Infinitely adjustable feed speed via frequency inverter - Feed motor: 3kW - Main motors: 2x55kW - Extraction outlet diameter: 250mm - Machine dimensions (L/W/H): 2150x1880x1800mm Nedpfx Agoyz T R Ej Dowf - Machine weight: approx. 3500kg ADVANTAGES – Made in Poland – Double-arbor multi-blade saw, 2x55kW – Original DTR + CE documentation – Used multi-blade saw in very good condition Net price: 88,900 PLN Net price: 21,200 EUR (based on the rate of 4.2 EUR) (Prices may change with significant rate fluctuations)

Condition: excellent (used), CATALOG NUMBER: 6911 TECHNICAL DATA - Track width: 350 mm - Shaft width: 370 mm - Max cutting height: 200 mm Maximum saw blade diameter: - Upper shaft: 340 mm - Lower shaft: 300 mm - Blade bore diameter: 80 mm From above: - Kickback guards Nsdsyh Nr Uopfx Ag Dowf - 2 pressure slip shafts - Pressure unit - Saw shaft 37 kW - 2 smooth slip shafts From below: - Infeed table + guide rail - Kickback guards - Crawler track - Saw shaft 37 kW - Crawler track - 1 outfeed shaft, slip, smooth - Pneumatically pressed rollers - Maximum saw blade diameter: 300 mm - Electric lifting of upper body up/down 1.1 kW - Automatic central lubrication - Electrically controlled stepless feed speed adjustment 3 kW - Extraction nozzle diameter: 230 mm, 250 mm - Dimensions (LxWxH): 3000x2300x1900 mm - Weight: approx. 4500 kg ADVANTAGES – Italian production – Twin-shaft – Used multi-blade saw – very good condition Net price: PLN 168,900 Net price: EUR 40,200 Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: like new (used), Year of construction: 2020, Dosing Unit Movacolor MC Balance MC Liquid Stock No.: 503616 Machine/Device Type: Dosing unit for powder and liquid Manufacturer: Movacolor Model: MC Balance & MC Liquid Year of manufacture: 2020 Movacolor Powder & Liquid Dosing Unit Consisting of: 2x Movacolor MCTC Touchscreen operator interfaces Movacolor MC Balance powder dosing unit Movacolor MC Liquid gravimetric liquid dosing unit Movacolor MCBC Blindcontroller Movacolor A30 HTC dosing unit Movacolor 12 L hopper Nwodpfxsy Ak Rlo Ag Dof The unit was only used once for testing purposes and is therefore as good as new!

Condition: excellent (used), functionality: fully functional, Balestrini Mini-C 2500mm Linear Copy Milling Machine Model MINI-C Working table length: 2500 mm Two milling units, one per side Milling motor: 2 x 5.5 kW Maximum tool height: 120 mm Heads included Nwjdpfsy Ew Ehox Ag Def Hydraulic table feed, steplessly adjustable Pneumatic clamps for units and material Number of material clamps: 5 pcs.

Condition: good (used), Direct from UK factory where it was filling water based solutions into bottles. Single head version also available. Nodpfx Ajyzcv Djg Dowf

Condition: excellent (used), axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 03/2002, total length: 6,910 mm, total width: 2,550 mm, suspension: air, tire size: 315/80-R22.5, wheelbase: 5,500 mm, Year of construction: 2002, Equipment: ABS, = Additional Options and Equipment = - BPW axles - Alloy wheels Nsdpfx Aeybk Rneg Dswf - Air suspension - Drum brakes = Remarks = 2002 VAN HOOL 2-axle 20ft tipping chassis with HYVA lifting cylinder, ABS, BPW Eco with drum brakes, twin tires with 315/80-R22.5 tires (L: 11/11mm, 10/10mm; R: 11/11mm, 9/9mm), unladen weight 4,560 kg, maximum gross weight: 32,000 kg, Dutch registration with valid technical inspection (APK) until 19.03.2026 = Further Information = Axle configuration Tire size: 315/80-R22.5 Axle brand: BPW Eco-Plus Brakes: Drum brakes Suspension: Air suspension Rear axle 1: twin tires; alloy wheels; max. axle load: 9,000 kg; tire tread left inner: 70%; tire tread left outer: 70%; tire tread right inner: 70%; tire tread right outer: 70% Rear axle 2: twin tires; alloy wheels; max. axle load: 9,000 kg; tire tread left inner: 60%; tire tread left outer: 60%; tire tread right inner: 55%; tire tread right outer: 55% Weights Unladen weight: 4,560 kg Payload: 27,440 kg gross vehicle weight: 32,000 kg Functionality Body make: VAN HOOL 2B0033 Condition Technical condition: very good Visual condition: very good Identification Registration number: OV-95-ZP Further information Please contact Arne Honingh for further information.

Condition: used, Manufacturer : Clextral Model : Evolum 32 Type: Twin-screw extruder Previous application: Food processing – Cooking and extrusion Frame sandblasted and repainted by the manufacturer Assembly comprising screws, barrel, shaft, coupling and bearing housing: brand new, original Clextral parts. To be assembled Refurbished second-hand Leroy Sommer 23.8 kW DC motor. To be assembled Nwsdpsy Abcljfx Ag Dsf DC motor: 23.78 kW Length of screw/barrel: 640 mm Screw elements: nominal diameter 32 mm. L/D : 20 Peripheral equipment not included but available on request: Granulator, dosing unit, water pump and new electrical cabinet. (Their integration may be subject to a feasibility study and a supplementary quotation.)

Year of construction: 2020, condition: excellent (used), functionality: fully functional, X Axis 7435 mm Y Axis 530 mm Z Axis 410 mm A/A1 Axis ± 125° Electrospindle Power: 8.5 kW Max. Speed: 24,000 rpm Tool Holder: HSK F63 10-position tool changer 8 individually motorized standard clamps Pendulum machining Nwjdpfx Agsy E S Rle Def Four standard retractable stops

Condition: used, Year of construction: 2011, HWACHEON HI-TECH 200B MC CNC LATHE MAKE HWACHEON, MADE IN SOUTH KOREA MODEL HI TECH 200B, MC YEAR 2011 CONTROL FANUC Oi-TD SWING OVER BED 500.0 mm SWING OVER SADDLE 390.0 mm MAX MACHINING DIA 350.0 mm MAX WORK LENGTH 400.0 mm TRAVERSES (XZ) X AXIS: 195.0 mm Z AXIS: 430.0 mm CHUCK DIA 250.0 mm MAX. SPINDLE SPEED 3,500 RPM SPINDLE NOSE A2-8 Nedpfx Agsyyy Ste Dowf SPINDLE BAR CAPACITY 76 mm TURRET 12 STATIONS MACHINE WEIGHT 4,500 kgs PLUS C AXIS MILLING CNC BARFEED RENISHAW PROBE PARTS CATCHER TAILSTOCK SWARF CONVEYOR MACHINE MANUALS

Year of construction: 1997, condition: good (used), Type: DDA:VP-370:A27097 Trough: approx. 3,000 x 660 mm Screw diameter approx. 370 mm Drive via geared motor Nsdpfx Agst S Sxgs Dewf

Condition: used, Year of construction: 2012, Technical details: Nwedpjy Amlljfx Ag Dof max. wheel diameter: 260 mm gear width: 320 mm max. module: 5 weight of the machine ca.: 21 t dimensions of the machine ca.: 8,71 x 5,97 x 3,49 m no. of teeth: 1...999 max. helix angle: +45/-45 ° pitch min.: 0,1 mm pitch max.: 1000 mm X-axis: 345 mm y-axis: 250 mm Z-axis: 320 mm b-axis: 360 ° c-axis: 360 °

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, We offer the Stephan Microcut MC15 cutter, designed for precise grinding, mixing, and emulsifying food products in food processing plants. It is a compact, industrial machine manufactured by Stephan Machinery GmbH, a company renowned for its solutions for producing fillings, emulsions, pastes, sauces, and other products requiring a uniform texture. The MC15 model is ideal wherever consistent processing results, high-quality grinding, and stable operation under production conditions are essential. With a rotational speed of 2945 rpm and a power output of 11 kW, the machine ensures intensive and effective processing of raw materials, resulting in a uniform consistency of the final product. It is an excellent solution for applications requiring precise cutting and dispersion of ingredients. The Stephan Microcut cutter is a good choice for companies looking for a used, reliable machine for precise product processing. Technical specifications: Manufacturer: Stephan Machinery GmbH Model: Microcut MC15 Year: 2020 Power supply: 400 V Power: 11 kW Nwjdpfx Agsy Eplwe Dsf Rotational speed: 2945 rpm Current: 22 A Motor type: HEFIE3 132L/2-2200 Advantages of the Stephan MC15 cutter precise grinding and emulsification of the product, high operating speed, compact, industrial design, German build quality, suitable for the production of fillings, emulsions, pastes, and sauces, stable operation in an industrial environment. Stephan Microcut MC15 is a practical solution for companies that want to improve product processing quality and work with a proven machine from a reputable manufacturer.

Year of construction: 2016, condition: used, Sewing machine Müller Martini Ventura MC Year: 2016 Description: - Commander with touchscreen - Automatic setting - ASIR Automatic Signature Image Recognition: ASIR 3 - 4 + 4 opening possibilities - Book block separator - Book stacker - Venturi Air Max. mechanical speed: up to 200 cycles/min Maximum size range: 510 x 320 mm Minimum size range: 120 x 75 mm Njdpfx Ageyzzwas Dewf Number of stitches: 13 Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: excellent (used), Year of construction: 2002, operating hours: 140 h, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 2,000 mm, overall weight: 12,000 kg, Equipment: safety light barrier, CNC Punching Machine Boschert TWIN / ROTA – 2023 MANUFACTURER COMPLETE OVERHAUL – EXCELLENT CONDITION For sale is a CNC punching machine Boschert TWIN / ROTA, year 2002, which underwent a comprehensive manufacturer overhaul in 2023. The machine is in exceptional technical condition and is immediately ready for production – ideal for subcontracting or companies with short-term capacity requirements. --- 🔧 Scope of Overhaul (2023): - Complete refurbishment of all axes - New motors - New wiring - New pneumatic components - Professionally serviced hydraulic system - Control system renewed - New brush tables --- ⚙️ Equipment: - Working area: 1250 x 2000 mm - 1x punching head, 360° rotatable - 1x punching head (fixed) - 8-station Revotool, including tools - Ready for immediate use – no investment required - Only approx. 140 operating hours since overhaul --- 💡 Special Features: The machine was not just serviced but has been thoroughly modernized. All key components have been renewed or overhauled – resulting in a significantly lower failure risk compared to typical used machines. --- 🎯 Ideal for: Njdoy A Sx Dopfx Ag Dewf - Subcontract manufacturing - Small and medium batch production - Companies with urgent production requirements --- 📍 Inspection and test run possible by arrangement. A video of the machine in operation can be provided upon request. If you have any questions or need more information, please feel free to send us a message or give us a call. Sale is carried out under exclusion of any warranty claims. The machine is sold in its current condition (as inspected and tested). Inspection and test run are expressly encouraged.

Condition: not inspected (used), Year of construction: 2009, operating hours: 12,500 h, overall weight: 2,500 kg, power: 22 kW (29.91 HP), Used shredding machine designed as a twin-shaft shredder blade 30 mm drive 22 KW we currently have 4 used machines in stock with control system and partly installation frame and hopper. Nsdpera A D Tefx Ag Dowf

Condition: ready for operation (used), Year of construction: 2025, A relatively new double-girder overhead crane Konecranes is available. Load capacity: 12t. Documentation available. An on-site inspection is possible. Nodpfsy Anuhex Ag Djwf