Used Steinel 2-Column Punching Tool for sale (97,154)

Condition: excellent (used), Year of construction: 2016, These machines are marketed as 2 opp machines and very good they are too but we consider them to be great little 1st opp machine in its own right. can be demonstrated Remarkable capacity for such a small machine. Machine has 6 tool holders Year: 2016 Control: ProtoTrak TMX Table Size: 457 x 381mm ‘X’ axis Travel: 355mm ‘Y’ axis Travel: 305mm ‘Z’ axis Travel: 455mm Spindle Speeds: 50 – 6000 RPM Lodpfsydvzdjx Ammoac Spindle Taper: BT 30 Tool magazine capacity: 8 station Dimensions w x d x h: 760 x 1220 x 2585mm Weight: 1,100 kg can be demonstrated if required

Condition: used, Horizontal machining center with pallet changer, STEINEL type BZ 24 FFZ with CNC control SIEMENS Sinumerik 850 M Manufacturer's No. 77, Year of construction 1990 Travel range X: 630 mm, Y: 500 mm, Z: 500 mm Table size per pallet 400 x 400 mm Pallet rotation B-axis Spindle speed max. 7100 rpm, stepless Ledpfx Asdzqmremmsac Tool holder ISO 40 Power connection 380 Volt, 50 Hz, 80 Amp. - Tool changer with 60 tool positions and dual-arm gripper - Pallet changer with 4 pallets - Horizontal pallet position for machining, axis movement = X-axis - Pallet rotation = B-axis - Spindle ram as Z-axis - Spindle ram with lateral movement as Y-axis - Coolant spray nozzles on the spindle ram and in the working area - Coolant system with chip conveyor under the working area - CNC control SIEMENS Sinumerik 850 M - Interface for data transfer Space requirement L x W x H 9000 x 3100 x 3200 mm Weight 13.5 tons Transport dimensions on truck: Machine with tool magazine L x W x H 9000 x 3000 x 3000 mm Chip conveyor L x W x H 4700 x 1000 x 1450 mm Loading into a 40" OT HC container is possible. Good condition.

Condition: used, Machine is not operational, control system does not start. Horizontal machining center with pallet changer, STEINEL type BZ 24 FFZ with CNC control system SIEMENS Sinumerik 850 M Mfg. No. 58, Year of manufacture 1990 Travel range X: 630 mm, Y: 500 mm, Z: 500 mm Table size per pallet: 400 x 400 mm Pallet rotation: B-axis Spindle speed: max. 7100 rpm, stepless Tool holder: ISO 40 Mains connection: 380 Volts, 50 Hz, 80 Amps - Tool changer with 60 tool positions and dual-arm gripper - Pallet changer with 4 pallets - Horizontally positioned pallet station for machining, axis movement = X-axis Ledpodzqmfefx Ammoac - Pallet rotation = B-axis - Spindle ram as Z-axis - Spindle ram with transverse movement as Y-axis - Coolant spray nozzles on the spindle ram and in the working area - Coolant system with chip conveyor under the working area - CNC control system SIEMENS Sinumerik 850 M with TFT monitor - Interface for data transfer Space requirement L x W x H: 9000 x 3100 x 3200 mm Weight: 13.5 tons Machine is not operational, control system does not start – otherwise in good condition. Transport dimensions: Machine with tool magazine L x W x H: 9000 x 3000 x 3000 mm Chip conveyor L x W x H: 4700 x 1000 x 1450 mm

Year of construction: 1982, condition: ready for operation (used), Two Steinel BZ20 milling machines are available. Travel X/Y/Z: 560mm/450mm/450mm, speed: 7000rpm, feed: 10000mm/min, tool holder: ISO30, tool positions: 40, rotary table diameter: 270mm, rotary table swivel range: 0°-24°, max. workpiece weight: 6kg. Control: Siemens System 8, weight: approx. 12000kg. Spare parts carrier. Lodpfxjtyax Sj Ammjac

Condition: used, 2-component gun, multi-function gun, cartridge gun, cartridge press, battery gun, battery-powered cartridge press -Manufacturer: Meritool, cordless gun PowerPush 5026 Type 2 Laedpfxjuwggwo Ammec -Cartridge: 600 ml -Accessories: incl. battery 20 V, see photos -Dimensions: 630/80/H290 mm -Weight: 2.3 kg

Year of construction: 1975, condition: used, General / Technical Data: Used machine, Speed control via flat belt drive with 3 stages Speed range: 700 rpm, 1400 rpm, and 2800 rpm Ledpfx Amscu I Exomjac Spindle travel: 90 mm Spindle diameter: 35 mm Column diameter: 60 mm Overhang: 200 mm Mounting: Direct mounting for drill chuck Table surface: 380 mm x 300 mm Dimensions: approx. 720 mm x 480 mm x 750 mm Weight: 60 kg Remarks: Excellent running condition of the drill spindle, three-phase connection, robust industrial design, Year of manufacture estimated to be approx. 1975

Condition: used, Manufacturer: TOOL TEMP Lasdoylaatjpfx Ammoc

Condition: good (used), Year of construction: 2009, Tooltemp TT 390 A 360° Öl 18 KW Öl year 2009 price: 2.850 € Laodexwch Aepfx Ammec contact: Mr. Rainer Eckerle

Condition: ready for operation (used), Montronix TS100 Tool Monitor, serial number: T1000022A0964, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Laodpfxsi Eb R Ao Ammec

Condition: ready for operation (used), Montronix TS100 Tool Monitor, Serial No.: T1000025A0991, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Laedpfxoi Eb R He Ammsc

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 5 h, actuation type: electric, bending angle (max.): 45 °, input voltage: 220 V, type of input current: DC, warranty duration: 3 months, Equipment: CE marking, documentation/manual, We offer this used Karnasch Bevel Tool 130210 chamfering machine, manufactured in 2025. If you have any questions or require additional information, please send a message or contact us by phone. ATA Karnasch 130210 Chamfering Machine ⚡Prepare welds and edges faster than ever before. Welding is a process that requires precision and thorough preparation. The quality of the weld largely depends on how you prepare the edges of the metal. The ATA Karnasch 130210 chamfering machine is a professional tool that will change your approach to metalworking, allowing you to perfectly prepare for welding, chamfering, and rounding edges. Ensuring compliance with safety regulations is as important as the durability of the weld. Rounding the edges minimizes the risk of cuts and damage, and with this chamfering machine, you will achieve a smooth and precisely rounded finish in one simple step. ⚙️Key Features and Benefits Versatility: Use the tool for chamfering and beveling edges, as well as for rounding with a perfectly precise radius. High precision: Achieve consistent and uniform results for all workpieces, whether you are creating a bevel or rounding an edge. Minimal vibration and noise: Compared to traditional grinders, the ATA Karnasch chamfering machine operates much quieter and with less vibration, improving working comfort. Cleanliness and safety: Reduce air pollution and sparks caused by fine dust. You will also avoid discoloration and excessive heating of the material being processed. Time-saving: Quick replacement of consumables reduces downtime, allowing for more efficient work. Speed adjustment: in the range of 5000 to 10000 rpm with a convenient regulator. Spindle lock, allows for quick and efficient cutter replacement. 👷For whom? The ATA Karnasch 130210 chamfering machine is an essential tool in many industries where precision and safety are critical. It is ideal for: Welding Offshore and shipbuilding industries Construction and steel structures Ledpszcyv Njfx Ammoac Pipeline industry Tank and bridge production 🎯Applications Chamfering Weld preparation Deburring Enlarging joints Available beveling heads for angles: 30°, 37.5°, 45°.

Condition: used, Year of construction: 2012, Technical details: Number of drawer: 48 Shelf width: 160 shelf length: 600 shelf height: 60 mm electrical connection: 230V / 50Hz / 16A V / Hz. dimensions L x W x H: 0,8 x 0,72 x 1,7 m Tool dispensing system - Warehouse management system Laodpfxju Nkz Ae Ammec Selection through automatic processes Electronic access to definable drawers via warehouse management software -Optimized storage and management of tools Storage above the drawers, rubberized, WxD: 720 x 190mm Equipment: Computer HP pro monitor and input device Hand scanner *

Condition: new, Year of construction: 2021, Field of application: Construction Lajdpfx Aeyz Tiuemmjc Empty weight: 175 kg General condition: very good Technical condition: very good Visual appearance: very good Please contact Ö. Inalkac for more information We offer you new tool, chisel, moil point, meissel, Punteros, wedge chisel, conic. For Atlas Copco Epiroc HB2200 MB1200 MB1000 MB1500 MB1700 HB2000 HB2200 HB2500 HB3100 Montabert, Rammer, Soosan, AJCE

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 315 t, stroke length: 800 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, table width: 1,160 mm, table length: 1,260 mm, table height: 600 mm, ram plate width: 1,160 mm, ram plate length: 1,260 mm, distance table to ram: 1,250 mm, clearance between the columns: 1,160 mm, retraction force: 30 t, oil tank capacity: 510 l, total length: 2,000 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 13,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, YQ32-315T Hydraulic Press This series of presses are general-purpose hydraulic presses, widely used in machinery manufacturing, automotive, motor, electrical appliance, light industry and other industries. They are suitable for metal processing procedures including drawing, bending, flanging, cold extrusion and blanking. The machines also perform straightening, press fitting, as well as compression molding of powder products, abrasive products, plastic products and insulating materials. The working pressure, pressing speed and stroke can all be adjusted within the specified parameter range according to process requirements. Equipped with an independent power unit and electrical control system, the press adopts centralized push-button control and supports three operation modes: manual, semi-automatic and automatic. It is available with two pressing modes: pressure setting and stroke setting. Operation Sequence: Motor start → Main cylinder piston rapid no-load downstroke → Low-speed pressurization → Pressure holding (holding time adjustable) → Pressure relief → Slide return stroke → Work stop → Total stop Mainframe The mainframe adopts a vertical three-beam four-column structure, consisting of an upper beam, a slide, and a lower beam connected by four columns, which are fastened with nuts to form a closed rigid frame. All major structural components of the mainframe are fabricated from welded steel plates using CO₂ gas shielded welding. After welding, the entire frame undergoes vibration stress relief to eliminate internal residual stresses. Lsdpfx Aey Uiyvommsac Key components are machined on advanced equipment such as gantry milling machines, large floor-type boring and milling machines, and large precision lathes, ensuring high overall accuracy of the machine. The mainframe is pre-tensioned using hydraulic nuts. The slide is connected to the piston rod of the main cylinder and moves up and down guided by the columns. T-slots are provided on the lower surface of the slide and the upper surface of the movable worktable for die mounting. The columns are made of high-quality 45 carbon steel with hard chrome plating on the surface; the column guide sleeves are made of composite material, offering excellent wear resistance and self-lubricating properties.

Condition: refurbished (used), Year of construction: 2010, load capacity: 200 kg, arm reach: 2,400 mm, As PLC Merkezi, we can conduct custom engineering projects with our industrial robots in our stock like this example. We can help you with: - Welding - Cutting - Machine Feeding - Palletising - Depalletising - Marble Processing - Apgant Machine Feeding and Metal Bending - And many other projects Brand: KUKA Model: KR200-3 Comp Condition: Refurbished with 1 year of warranty Version: V5.6.12 Year: 2010 Control Cabin: KRC2 ed 05 Rated Payload: 200kg Access Distance: 2400mm Laodpeq Dpxdofx Ammoc Included: Manipulator + Control Cabin + All Wiring Sets + Teach Pendant +1 Hertz Spindle Motor (New) + Delta Spindle (Set with the Mechanical System) + Tool Changer Table Not Included: 7th Axis, Engineering Design and Consultancy Shipping: NOT included in the price Payment: 100% payment before collection

Condition: excellent (used), operating hours: 50 h, We are offering this very well-maintained, practically unused Festool KS 120 EB table saw with stand for sale. Lajdpjzfv Swofx Ammec If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 1987, pressure 320 t plate thickness 0 mm no. of strokes 80 Hub/min pressing capacity total 320 t stroke 30 - 80 mm table surface area unten: 630 x 740 mm table surface area oben: 630 x 630 mm total power requirement 60 kW This fineblanking press FEINTOOL HFA 320 was completely overhauled in 2019 and is in new condition with new CE mark MAIN RAM total force (nominal) 320 to stroke min. 30 mm stroke 80 mm V-RING nominal force 160 to stroke 30 mm COUNTER RAM nominal force 80 to stroke 30 mm TOOL DIMENSIONS lower table - width 630 mm lower table - depth 740 mm Laedpfx Aovwgl Nemmoc upper table - width 630 mm upper table - depth 630 mm daylight max. 320 mm ELECTRICAL SPECIFICATIONS total power consumption 60 kW

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Lajdpfx Aexxb Rrommjc Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2005, XYZ Proturn VL425 ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK VL Control (Reconditioned 2025) Max’ Distance Between Centres 1250mm Max Swing over Bed 400mm Max’ Swing over Gap 700mm Spindle Bore 80mm Spindle Speeds 25 – 2500 rev/min Spindle Motor 10hp / 7.5Kw Quick Change Tool Post Tailstock MT5 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2005 We can offer delivery & installation, operater training and warranties. Supplied with: 3 Jaw Chuck Lodjxt Ibyepfx Ammsac Tooling as photographed Machine Handbooks 3 Toolholders (More available if required). Tracking Coolant Worklight Auto Lubrication *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #78938 Machine Serial Number: L247 Cost: £14,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2011, XYZ Proturn SLX425 ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK SLX Control (2011) Max’ Distance Between Centres 1250mm Max Swing over Bed 400mm Max’ Swing over Gap 700mm Spindle Bore 80mm Spindle Speeds 25 – 2500 rev/min Spindle Motor 10hp / 7.5Kw Quick Change Tool Post Ljdow Hb T Sopfx Ammeac Tailstock MT5 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2011 We can offer delivery & installation, operater training and warranties. Supplied with: 3 Jaw Chuck Tooling as photographed Machine Handbooks 3 Toolholders (More available if required). Tracking Coolant Worklight Auto Lubrication *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #78937 Machine Serial Number: L507 Cost: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), 595 x 395 mm Ljdpjiz A E Eefx Ammeac Clamping pressure -70 bar MARCELS MASCHINEN AG

Condition: excellent (used), Year of construction: 2024, DEMONSTRATION MACHINE For sale is a TEKNATOOL Nova Nebula 230 DVR woodturning lathe with a direct drive ranging from 50 to 4,000 rpm. The demonstration machine is in excellent condition. Technical specifications: - Center height: approx. 230 mm - Maximum distance between centers: 680 mm - Spindle thread: M33 x 3.5 with ASR (Euro) safety groove - Spindle and tailstock taper: MT2 (Morse Taper 2) - Infinitely variable speed (direct drive): 50 – 4,000 rpm - 24-position indexing system Lasdpfx Amsy N R A Iomjc - Motor: 1.7 kW / 2.3 HP (230 V) with forward and reverse operation - Tailstock quill travel: 120 mm (with scale and trapezoidal thread) - Weight: 204 kg - Shipping weight: approx. 225 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Forwarding delivery: Austria: € 105.00 incl. VAT Germany: € 125.00 incl. VAT South Tyrol: € 150.00 incl. VAT Related keywords: woodturning lathe, lathe, turning machine, woodturner, woodturning, turning tools, wood spinning, turning, machine Reference: R-A0117

Condition: used, XYZ SMX 2000, Year 2017, from research and development facility, tooling and vices in images not included. Prot Trak SMX Control Lodpfxsx Saulj Ammsac

Condition: used, Year of construction: 2001, machine/vehicle number: 01/2437, Capacity: 250 ton Lodpou U Nimefx Ammeac V – Ring nominal force: 30 - 125 ton Counter ram nominal force: 30 - 125 ton Ram stroke: 67 mm Table surface area : 560 x 600 mm Slide area: 560 x 560 Number of strokes: 80 s.p.m. Weight of machine approx.: 14.000 kg Standard configuration Automation roll-off try with leveller

Condition: new, width of the strips 75 mm band length 2000 mm band speed 30 - 34 m/sec total power requirement 4,1 HP weight of the machine ca. 75 Kg Ledoirwwlepfx Ammeac dimensions of the machine ca. 1,2 x 0,5 x 0,85 m Industrial floor belt sander with the following advantages: - Danish top quality - Separate emergency stop - Motor brake - Reliable - Simple and practical operation - Simple adjustment - Easy and quick sanding belt change without tools - 5 year guarantee on the motor - Optimum safety