Used Subal Subal T20 for sale (471)

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 11,362 h, load capacity: 2,000 kg, fuel type: electric, drive type: Elektro, Low lift truck Condition: Ready for use and fully functional Technical condition: good Kedpfx Ameyyf H Aj Nelr Battery Volt: 24V

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 8,734 h, load capacity: 2,000 kg, fuel type: electric, drive type: Elektro, Low lift truck Klsdpfx Asyyf Hcem Njr Condition: Ready for use and fully functional Technical condition: good Battery Volt: 24V

Condition: excellent (used), Year of construction: 2015, Massive Parquete production line Manifacturer - MICHAEL WEINIG AG / GMC SERVICE Year - 2015/2007 Capacity - 800m2/ shift Max Width of Parquet- 200 mm Max length of Parquet - 2.400 mm Complete line for production normal solid parquet ! On this line it is possible to produce different dimensions at the same time ! Kjdpfsyzfr Uox Am Nslr Kind of parquet - Herringbone 90 , Chevron 45/60 Condition - Exellent

Condition: used, axle configuration: 2 axles, first registration: 01/2008, color: other, Year of construction: 2008, Empty weight: 6.910 kg Axle 1: left 14 mm right 14 mm Axle 2: left 14 mm right 14 mm Axle 3: left mm right mm Kljdpfx Amjyv Ep As Njr

Year of construction: 2011, condition: ready for operation (used), Clamping force: 700kN, Opening stroke: 305mm, Ejector stroke: 105mm, Ejector force: 20kN, Screw diameter: 30mm, Shot volume: 99cm³, Speed: 480rpm, Injection pressure: 1451bar, Weight: approx. 6200kg, Control system: CC200, Operating hours: 57077h. Documentation available. An on-site inspection is possible. Kledeyxgqgepfx Am Nor

Condition: good (used), Year of construction: 2021, operating hours: 1,291 h, load capacity: 2,000 kg, lifting height: 4,750 mm, fuel type: electric, mast type: triplex, construction height: 2,250 mm, empty load weight: 5,000 kg, mileage: 1,291 km, Electric triplex forklift Brand: Baoli by STILL Year: 2021 Capacity: 2,000 kg Lifting height: 4,750 mm Overhead clearance: 2,250 mm ONLY 1,291 operating hours Equipped with FREELIFT and SIDESHIFT Battery: 2021 with external charger Klodpfsywamxex Am Njr

Condition: excellent (used), functionality: fully functional, mileage: 53,000 km, fuel type: diesel, maximum load weight: 230 kg, Year of construction: 2021, operating hours: 2,700 h, TRUCK MOUNTED PLATFORMS Isoli PNT 200 H Year 2021 Working height 20 m Horizontal outreach 9 m Basket capacity 230 kg Hours 2.700 Kledpeyy R Hbsfx Am Nsr km 53.000 Excellent conditions Complete of all documents Inspected and refurbished by service provider

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 25000 € 480 € 2050 mm 6 mm 30 1/min 2.3 ° 750 mm 7.5 kW 800 mm 530 mm 2355 mm 2720 mm 1630 mm 1230 mm 3200 kg The machines feature a robust, welded steel frame for maximum cutting precision Motorized back gauge 750 mm, ball screw spindles, NC control 2 cutting edges on the upper blade and 4 cutting edges on the lower blade Kjdpfx Ajwp S Swom Njlr 1000 mm squaring arm with scale, T-slot, and flip stop 2 support arms Mechanical downholder Manual cutting gap adjustment on the front Balls in the table Cutting line illumination Foot pedal Emergency stop button Operating manual with EC declaration of conformity. INCLUDES THE FOLLOWING OPTIONAL EQUIPMENT: Blades suitable for cutting stainless steel Rear light barrier protection

Condition: excellent (used), IM Very good condition. Kjdpeyxnxlofx Am Nelr

Condition: new, Year of construction: 2025, A laser marking machine is an invaluable part of a production. Wattsan FL TT can mark or engrave QR codes, serial numbers, dates, and any picture you want onto items. This laser marker works with metals and their alloys. Plastic, fabric, leather, glass, and other materials are also within reach of a laser. The marker’s tripod can be removed and mounted on the ceiling, allowing you to operate work items of any size! Wattsan FL TT comes with the EzCad system, which allows you to edit text in real time. It also supports vector, bitmap, BMP, PLT, CDR, DXT, and AI formats, among others. You can give our managers a call for additional details! Wattsan FL TT characteristics: Working area: 300x300, 110x110, 200x200 mm Laser power: 20-100 W Kjdpfx Amsh Uc Dbj Nolr Machine size: 740x400x740 mm Packing size: 820x490x850 mm Weight: 54 kg Laser sourse: RAYCUS, JPT (MOPA), IPG, MAX Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 20 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: excellent (used), Year of construction: 2019, operating hours: 8,250 h, clamping force: 2,000 kN, screw diameter: 50 mm, displacement volume: 392 cm³, injection pressure: 2,000 bar, total length: 4,110 mm, total width: 2,650 mm, total height: 4,810 mm, overall weight: 22,000 kg, clamping force: 2000 kN size of mould plates h x v: 1772 x 800 mm min. mould height: 400 mm max. open daylight: 900 mm opening stroke: 500 mm round table diameter: 2000 mm screw diameter: 50 mm swept volume: 392 ccm injection pressure: 2000 bar equipment included Kedoyv D T Tspfx Am Nolr rotary table screen text german screen text english CEE-socket 16A core pulling hydraulically 4x air valve 1x machine incl. water flow regulator machine without material hopper Anti vibration mounts interface robot EUROMAP 67 interface EUROMAP 73 interface OPC measures of machine l x w x h: 4.11m x 2.65m x 4.81m total weight: 22000KG

Condition: new, weight max. in kg 2.000 kg Klodpfsnzh Hfsx Am Ner table height max. 1.010 mm table height min. 190 mm table surface area 800 x 1.300 mm engine 0,75 kW The Unicraft SHT 2000 hydraulic scissor lift table (1300058) offers a reliable solution for your lifting projects, e.g., for manually feeding a planer or saw with entire stacks of wood. With an impressive load capacity of 2000 kg and a robust construction, this lifting platform is ideal for use in industrial environments. This scissor lift table is characterized by its precision and user-friendliness, enabling you to lift heavy loads safely and efficiently. With a maximum table height of 1,010 mm, the Unicraft SHT 2000 is the ideal choice for improving your workflows and protecting the back of the machine operator. Drive: Electro-hydraulic Cable length: 3 m Safety standard: EN 1570 Condition: New with warranty

Condition: new, maximum load weight: 1,538 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 3,100 mm, loading space width: 1,650 mm, loading space height: 300 mm, total width: 1,713 mm, total height: 1,060 mm, Year of construction: 2026, Humbaur HT 203116 Tandem Trailer Base price: €3,600 Our special offer: €3,100 including 19% VAT, freight costs (self-collection in Nuremberg), and registration certificate! Description: Everything a professional needs: A robust flatbed trailer with a fully hot-dip galvanized frame and chassis. All critical components, such as longitudinal beams and underrun protection, are also corrosion-protected. The drawbar is easily replaceable in case of damage during tough working conditions. Recessed lashing rings secure the load—each ring offers a tensile load capacity of up to 400 kg, as certified by Dekra. The sturdy side walls are made from anodized aluminum with recessed locks and, like the galvanized corner stanchions, are fully removable. Technical Data: Trailer type: Tandem axle Design: Aluminum Unladen weight: 462 kg Gross vehicle weight: 2,000 kg Kledpfjyw Eh Usx Am Ner Payload: 1,538 kg Internal length: 3,100 mm Overall length: 4,514 mm Internal width: 1,650 mm Overall width: 1,713 mm Internal height: 300 mm Overall height: 1,060 mm Loading height: 720 mm Wheels: 13 inch Standard Equipment: V-drawbar, hot-dip galvanized by immersion 13-pin connector and reversing light 18 mm thick phenolic-coated floor panel Side walls made from anodized aluminum with recessed locks, fully removable Lashing rings integrated into the V-shaped outer frame profile, tensile capacity 400 kg each, Dekra certified Jockey wheel

Condition: excellent (used), axle configuration: 1 axle, first registration: 12/2009, loading space length: 10,620 mm, loading space width: 2,500 mm, loading space height: 2,500 mm, total length: 11,070 mm, total width: 2,600 mm, suspension: air, tire size: 275/70 R22.5, wheelbase: 6,280 mm, color: other, Year of construction: 2009, Equipment: ABS, tail-lift, = Further options and accessories = - Rear doors - Air suspension - Side door = Further Information = Axle configuration Tyre size: 275/70 R22.5 Brakes: Disc brakes Suspension: Air suspension Rear axle: Max. axle load: 10,000 kg; Steered; Tyre tread left: 30%; Tyre tread right: 30% Weights Klsdpfx Amoyu Skpj Njr Unladen weight: 8,220 kg Payload: 13,780 kg gross vehicle weight (GVW): 22,000 kg Functionality Tail lift: Dhollandia Refrigeration unit: Diesel and electric (7,410 operating hours diesel) Maintenance APK (general technical inspection): Valid until 12/2026 Condition Technical condition: Very good Visual condition: Very good Damage: None Identification Registration: OK-38-YK

Condition: not inspected (used), operating hours: 47,019 h, functionality: unexamined, machine/vehicle number: 320678, turning diameter over cross slide: 185 mm, turning diameter: 280 mm, spindle bore: 50 mm, chuck outer diameter: 110 mm, controller model: ELTROPILOT EPL 2, number of slots in tool magazine: 16, No reserve price – guaranteed sale to the highest bidder! Bidding obliges the buyer to collect the item on time between 08.04.26 and 16.04.26. TECHNICAL DETAILS Spindle bore: 50 mm Chuck diameter: 110 mm Turning diameter over bed: 280 mm Turning diameter over cross slide: 185 mm Centre height: 240 mm Bed width: 250 mm Number of turret stations: 16 MACHINE DETAILS Klodpsyk Eq Ujfx Am Nsr Control: ELTROPILOT EPL 2 Operating voltage: 380 V Frequency: 50 Hz Rated current: 50 A Connection: 18 kVA Dimensions & weight L x W x H: 3000 x 1700 x 1800 mm Machine weight: 1,500 kg EQUIPMENT Chip conveyor External reference: 5

Year of construction: 1998, condition: used, machine/vehicle number: 71257/1, with powered roller conveyor as a folding table, length 500 mm Technical specifications: - Manufacturer: Celfa - Year 1998 - Model: TTE 2000 Kodpfeyvva Ssx Am Nolr - Year of manufacture: 1998 - Working width: 1,300 mm - Overall width: 1,580 mm - Length: 2,000 mm (1,500 + 500 mm) - Working height: 930 mm ±20 mm - Bar diameter: 25 mm - Chrome-plated bars - Bar spacing: 95 mm - Roller spacing on folding table: 115 mm - Feed speed 2,1 - 12,3 m/min. - Feed speed adjustable, handwheel - Motor power, drive: 0.26 kW Exx-d - Volts / Hz: 400 V / 50 Hz - Feed speed: approx. 5–25 m/min. - Feed via handwheel adjustment - Location: in stock

Condition: reconditioned (used), convotherm 20.10 C4 Oven after complete overhaul. Fully operational, ready for use. Power: 38.9 kW, 56.2 A, 400 V. Kjdpox Rpqmjfx Am Nelr

Year of construction: 2005, condition: used, functionality: fully functional, NIR device Polysort 2000 from Tomra with a complete sorting line consisting of feed chute, acceleration belt, separator edge and canopy, optionally with additional conveyor belts. Kledpfxsylzqgj Am Nsr

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Equipment and technical data: - Fixed milling spindle; newly fitted bearings - with table extension and extendable frame support 2500 mm - Motor 5.5 kW - Speeds 3000/4500/6000/8000/10000 rpm - Milling fence with 2 adjustment options: - complete fence - rear take-off jaws - Extraction hoods: 2 x 120 mm - Automatic motor brake - Right/left rotation - with Haffner power feed with 4 rollers Weight approx. 700 kg Availability: by arrangement Klsdsw I Uinopfx Am Njr Location: Flörsheim

Condition: ready for operation (used), Year of construction: 2019, spindle speed (max.): 4,000 rpm, bar diameter (max.): 65 mm, number of axes: 9, This 9-axis Muratec MT200 multi-spindle turning machine was manufactured in 2019. It features a maximum bar capacity of 65 mm and a chuck size of 210 mm. The machine includes an impressive maximum feed speed of 24 m/min on the X-axis and 36 m/min on the Z-axis. If you are looking to get high-quality turning capabilities, consider the Muratec MT200 machine we have for sale. Contact us for further details. • Chuck size: 210 mm (8 inch) • Maximum swing: 205 mm (15 stations) / 228 mm (12 stations) • Maximum bar capacity: 65 mm (standard) / 80 mm (option) • Turret stations: 15 (upper and right) / 12 (lower) • Bar diameter: 65 mm (Standard) / 80 mm (Option) • Axis stroke (2-turret): • Upper turret: X 220 mm, Z 770 mm, Y +/- 40 mm Klsdpfx Amjyvuxyj Njr • Lower turret: X 200 mm, Z 770 mm, Y +/- 40 mm • Right spindle (Zs): 880 mm • Maximum feed speed: • X axis: 24 m/min • Z axis: 36 m/min • Y axis: 12 m/min • Live tooling motor: 14.0 kW max (4.8 kW continuous) • Live tooling max speed: 4500 rpm • Spindle positioning: C axis control (+/- 0.015 degrees) Additional equipment • Gantry loader capacity: 140 mm x 105 mm (3 jaw), up to 8.0 kg x 2 (option) • Parts catcher capacity: 65 mm x 160 mm, 2.5 kg Technical Specification Counter Spindle Yes

Condition: new, Year of construction: 2025, fuel type: diesel, motor manufacturer: 4TNV88-BIB, General information Field of application: Construction Weights Empty weight: 1.395 kg Functional Generator capacity: 20 kVA CE mark: yes Other information Generator: Meccalte Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 175 l Kljdpfx Aouxrxuem Nor Transport dimensions (LxWxH): 2,4x1,2x1,75 Additional information Please contact Kenny Bongers, Tijmen Pesselse or Arjen van Dijk for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: used, machine/vehicle number: IC1216, Year of construction: 2019, operating hours: 13,434 h, load capacity: 1,200 kg, lifting height: 2,500 mm, construction height: 1,750 mm, enginetype: Electric, manufacturer: Jungheinrich Klodpfxoxccr Ss Am Nsr

Condition: good (used), machine/vehicle number: 0106, Year of construction: 2005, Dana 1204FT20213-100 from Uniktruck Klsdpfxeyug Uco Am Nsr

Condition: new, functionality: fully functional, fuel type: electric, color: other, Year of construction: 2026, Our stationary crushing and screening plant, with a capacity of 200-350 tons per hour, consists of a 30 m³ vibrating feeding bunker, mid-screen, CLK-110 jaw crusher, cone crusher, vertical shaft impact crusher, stock and return conveyors, control cabin, and automation system. Products transferred to the feeding bunker are separated from dirt and mud using the intermediate screen and are bypassed with a bypass conveyor. The material above the screen goes to the jaw crusher, while the products on the second level drop onto the jaw discharge conveyor, and the products on the lowest level are discarded as bypass. The jaw crusher has a maximum feeding capacity of 800 mm and crushes the products, which first go to the washing screen. Here, the finest products are sent to the stock area with a screw washer, and the other products are sent to the cone crusher. The products coming out of the cone crusher are directed to the other screen and the vertical shaft impact crusher, allowing the desired products to be obtained from the final screen at high quality. TBX-30 Vibrating Feeding Bunker CLK-110 Jaw Crusher TE-2060x3 2000x6000 3-Deck Vibrating Washing Screen HY-800 8000x8000 Screw Washer 20m3 Cone Crusher Feeding Bunker CC-300 Cone Crusher Kedpfxjyzxdds Am Nolr 20m3 Vertical Shaft Impact Crusher Feeding Bunker VSI-900 Vertical Shaft Impact Crusher TE-2060x4 2000x6000 4-Deck Vibrating Screen TE-2060x3 2000x6000 3-Deck Vibrating Screen Conveyor Belts, Control Cabin, Electrical Panel, and Automation System

Condition: new, functionality: fully functional, fuel type: electric, color: other, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO manufactures and installs stationary type stone crushing and screening plants according to customer requirements. Production capacity of our stationary plants differs from 100 to 1000 ton per hour. 150-200 Tons/hour capacity of Screening & Washing Plant: Kledjyzxcaopfx Am Nsr - 30m3 Sand Feeding Hopper -1600x5000mm Vibrating Screen - STE 1224 Dewatering Screen & Hydrocyclone - Conveyor Belts - Control Cabin, Electrick Panel and Cables FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!