Used Tecnogi 1080 for sale (298)

Condition: good (used), Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipper, forklift tines, forklift forks, fork tines Hodpfx Akjwn D Eyorjnu -Forklift tines: 2 pieces/1 pair -Length: 1800 mm -Cross-section: 200 x 60 mm -Recording: see photos -Transport dimensions: 2060/1080/H200 mm -Total weight: 487 kg

Condition: good (used), Thread cutting machine, pipe thread cutter -Manufacturer: Ridgid, thread cutting machine type 535 -Pipe size: 1/8 to 2 inches -Spindle bore: Ø 64 mm -Operating voltage: 230 volts -Dimensions: 1080/700/H1140 mm -Weight: 128 kg Hsdpjwub Ekefx Akrjnu

Condition: used, System for filling yoghurt and quark into round plastic buckets of various sizes and for labelling them with self-adhesive shrink labels. The system consists of a separate filling/capping unit and a labeller. Filler/capper: The plastic buckets are placed onto the conveyor belt from the stack of buckets in the bucket magazine. The buckets are sterilised with hydrogen peroxide and steam via a heating cartridge prior to filling, and the lids are sterilised prior to sealing. The product is filled into the buckets using a calibratable load cell until a specified weight is reached. The sealer places lids from the lid magazine onto the buckets and presses them firmly into place. Labeller: Continuous labelling machine for self-adhesive sleeve labels. Suitable for various bucket sizes with a capacity of 1–5 kg. Capacity filler/capper appr.: 450 units/h Based on a 6-litre bucket; depends on container size and product viscosity Hnjdpey Nnb Uefx Akrou Capacity labeler appr.: 1080 units/h Formats: round plastic buckets ranging from 1 litre to 10 litres

Condition: used, Year of construction: 2018, machine/vehicle number: D18451643, used vacuum pump Busch MM 1104 BP O2 for sale, YOM: 2018 Manufacturer: Busch, Vacuum Pumps and Systems Model: Mink MM 1104 BP O2 S/N: D18451643 MFG: 2018 New air filter Nominal pumping speed: 62 m³/h Ultimate pressure: 60 hPa (mbar) Nominal motor speed: 1800 min-1 Noise level (ISO 2151): 71 dB(A) Weight approx.: 155 kg Dimensions (L x W x H): 1080 x 430 x 590 mm Gas inlet / outlet: G 1 ¼" / G 1" (NPT) Max pressure: 1,2 - 2.0 bar (17-29 psi) Motor: 2.2 – 3.2 kW (3.0 HP), 3-phase, 230/460 V, 60 Hz Lubrification: dry/oil-free Cooling: air-cooled Description: The Busch Mink MM 1104 BP O2 is a specialized, industrial-grade dry claw compressor and vacuum pump. The "BP" designation stands for overpressure/pressure variants, while the "O2" specification denotes it is configured specifically for handling oxygen-enriched gases. 1. The Rotary Claw Pumping Principle The core of the pump consists of two claw-shaped rotors mounted on parallel shafts inside a synchronized pumping chamber. Synchronized Counter-Rotation: The rotors turn in opposite directions. Their movement is precisely synchronized by a timing gear drive located in a separate, sealed gear housing. Contactless Operation: As the claws rotate, they pass incredibly close to each other and the interior cylinder wall, maintaining tight tolerances measured in fractions of a millimetre. However, they never actually touch. Internal Compression: As the claws roll past the inlet port, gas is drawn into the expanding chamber. As rotation continues, the volume between the claws is trapped, compressed mechanically by the geometric shape of the rotors, and then forced out through the discharge port. Because there is zero friction or mechanical wear inside the pumping chamber, the pump requires no internal lubrication. This yields an entirely oil-free exhaust gas stream. 2. Engineering Architecture: The "BP" Designation The BP (Back Pressure / Overpressure) variant modifies the internal geometry and sealing profile of the standard Mink platform. Dual-Function Flexibility: While traditional vacuum pumps exhaust directly to atmospheric pressure, BP variants are built with heavy-duty casings and specialized shaft seals. This allows them to operate as both low-pressure compressors and high-differential vacuum pumps. Variable Pressure Handling: They can safely discharge gas into a pressurized manifold system (up to standard rated overpressures, usually around 2.0 to 2.5 bar absolute) without suffering from seal failure or overheating. 3. Materials & Thermodynamics of the "O2" Variant Pumping high-purity or enriched oxygen (O₂ > 21%) presents severe thermal and chemical hazards. Standard industrial pumps will trigger a catastrophic flash fire if compressed oxygen reacts with hydrocarbon lubricants or friction points. The O2 variant incorporates specific thermodynamic and chemical isolation measures: Gearbox Lubricant: PFPE (Perfluoropolyether) synthetic fluid. It is chemically inert and completely non-reactive with pure oxygen. Price: 3.290 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Änderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana Hjdpfx Akezz Tm Rsronu

Condition: new, Year of construction: 2026, The HDE Series Hopper Dryers are designed for efficient drying of plastic granules before extrusion, injection molding, and blow molding processes. Moisture contained in plastic materials can cause defects such as bubbles, silver streaks, poor surface finish, and reduced mechanical properties. The HDE Series effectively removes surface moisture using a controlled hot-air circulation system, ensuring stable processing conditions and consistent product quality. All material-contact surfaces are manufactured from stainless steel, preventing material contamination while providing excellent corrosion resistance and long service life. The precision cast aluminum hopper offers excellent heat retention and ensures uniform drying throughout the entire material batch. A specially designed hot-air diffuser distributes heated air evenly inside the hopper, significantly improving drying efficiency. The low-noise blower delivers stable airflow while preventing dust from entering the material. The hopper is equipped with a material level inspection window, an auto loader mounting port, and safety systems protecting against overheating and motor overload. The modular design allows quick cleaning and fast material changes, making the HDT Series suitable for continuous industrial operation Technical Specifications Hopper Dryer HDE-25 • Hopper Capacity: 25 kg • Blower Power: 135 W • Heater Power: 3.5 kW • Maximum Drying Temperature: 140°C • Power Supply: 380 V, 3-Phase, 50 Hz • Control Voltage: 220 V, Single Phase, 50 Hz • Total Installed Power: 3.6 kW • Installation Size: 150 × 150 mm • Dimensions (L × W × H): 830 × 580 × 840 mm • Weight: 34 kg Hedpfjzv Emlex Akrjnu Hopper Dryer HDE-50 • Hopper Capacity: 50 kg • Blower Power: 155 W • Heater Power: 4.5 kW • Maximum Drying Temperature: 140°C • Power Supply: 380 V, 3-Phase, 50 Hz • Control Voltage: 220 V, Single Phase, 50 Hz • Total Installed Power: 4.7 kW • Installation Size: 160 × 160 mm • Dimensions (L × W × H): 920 × 590 × 940 mm • Weight: 45 kg Hopper Dryer HDE-100 Technical Specifications • Hopper Capacity: 100 kg • Blower Power: 215 W • Heater Power: 6.5 kW • Maximum Drying Temperature: 140°C • Power Supply: 380 V, 3-Phase, 50 Hz • Control Voltage: 220 V, Single Phase, 50 Hz • Total Installed Power: 6.7 kW • Installation Size: 178 × 178 mm • Dimensions (L × W × H): 1070 × 700 × 1080 mm • Weight: 68 kg

Condition: used, Mechanical scissor lift table with roller device - welding positioner, vessel rotator Ideal base for 3D welding table Load capacity 800 kg (maximum load with fixed castors) Load capacity 2000 kg (maximum load without fixed castors) Platform size 1800 x 860 mm Usable lift max. 690 mm Table height - bottom position 770 mm (without top frame) Table height - top position 1460 mm (without top frame) Table height - bottom with locking bolt 830 mm (without top frame) Table height - top with locking bolt 1080 mm (without top frame) Top frame height 80 mm Load capacity of rotator approx. 400 kg Roller spacing / axle spacing 155 to 685 mm Axle distance to top frame 190 mm Roller diameter 100 mm Roller width 40 mm - Scissor lift table is ideal as workbench, assembly fixture, welding table base, or with vessel rotator for pipe welding - Mobile on 4 polyamide rigid castors Ø 125 mm, 2 of which are swiveling with brakes - Height adjustment via trapezoidal screw spindle and hand crank Hjdpfjx U Eh Nsx Akrsnu - 4 locking bolts for height adjustment, hole spacing 50 mm - Removable table top with forklift pockets - Roller spacing of polyurethane rollers on rotator adjustable in perforated pattern - Very robust construction made of square profiles with 5 mm to 10 mm wall thickness Required space (L x W x H): 1800 x 860 x 1200 mm Weight without rotator 470 kg Weight with rotator 620 kg Very good condition

Condition: ready for operation (used), Ixion BT 23 FST Pillar Drilling Machine / Drill Press Speed range: 120 - 1080 rpm / 240 - 2160 rpm Spindle taper: MT 3 Quill stroke: 120 mm Drilling capacity (steel): 23 mm Throat depth: 260 mm Hnodpfx Asyybpgjkrou Dimensions: approx. 1000 mm x 1000 mm x 1950 mm Weight: approx. 430 kg You are welcome to arrange an on-site inspection. We can organize affordable shipping for you! You will receive a proper invoice. For international customers, we can also provide a net (tax-free) invoice, provided a valid VAT ID is supplied. Subject to prior sale. Visit our shop and check out our other listings. Company names and trademarks mentioned are property of their respective owners and are used only for identification and description of the products. Deviations from technical specifications as well as errors in the item description may occur and are subject to change.

Year of construction: 2023, condition: new, The Newpower Generator proudly presents their new NWC77 emergency generator set with Cummins engine. The unit is new, complete including control, diesel tank, exhaust batteries, electric speed controller, AVR, battery charger, cooling water heater, turbocharger, sockets, FI protection circuit breaker. Technical specifications: Model: NWC77 emergency generator with sound insulation Cummins Engine Newpower generator set Engine : Cummins 4BTA3.9-G11, 4 cylinders Water-cooled and intercooler Generator: Newpower NW/N55 Continuous power: 56 kW / 70 kVA Maximum power: 61 kW / 77 kVA Connection: 4P circuit breaker, 5-wire cable Sockets: 1x5P 63A, 1x5P 32A -, 1x5P 16A -, 2x2P 16A Schuko sockets Frequency : 50Hz Voltage: 400/230V RPM : 1500 rpm. Control: Comap IL4 AMF8 Year of construction: 2023 (new) Dimensions (LxWxH) : 2400x1000x1500 mm Weight: 1232 kg Diesel tank: 135L 100% load approx. 17.6l/h 75% load approx. 13.2l/h 50% load approx. 9.1 l/h additional costs 100A automatic switch € 620 250A automatic switch € 1080 Shipment: Hedpfennx A Dsx Akrjnu - Worldwide transport including unloading is possible for an extra charge - In order to be able to quote an exact freight price, please send us a request with your data and your complete address guarantee The guarantee of the power generator within Germany is 12 months or 1000 hours from handover (whichever comes first). Provided you use the Newpower maintenance service in the maintenance intervals. Excluding user error, under Newpower international warranty.

Condition: new, Year of construction: 2023, The Newpower Generator proudly presents their new NWC165 emergency generator set with soundproofing. The unit is new, complete including control, diesel tank, exhaust batteries, electronic speed controller, AVR, battery charger, cooling water heater, turbocharger, sockets, FI protection circuit breaker. Description Model: NWC165 Cummins Engine Newpower Generator Continuous power: 120kW / 150 kVA Maximum power: 132kW / 165 kVA Engine : Cummins 6BTAA5.9-G2, 6 cylinder water-cooled, turbocharged Connection: circuit breaker RCD, 5-wire connection Sockets: 1* 400V 5Px125A, 2* 400V 5PX63A, 2* 220V 2PX16A Frequency : 50 Hz Voltage: 400/230 V Hjdpfoncd U Esx Akronu including electronic speed control, AVR, battery charger, galvanized soundproofing, cooling water heater Control unit: Comap AMF8, mains feed Dimensions: 3050*1120*1670mm Weight: 2043kg Diesel tank: 275 L At 100% load: 30 L/h At 75% load : 23 L/h At 50% load : 16 L/h Grid monitoring, grid feed-in Soundproofed, ready to use. additional costs 250A automatic switch : 1080 € 400A automatic switch: 1620 € Shipment: - Worldwide transport including unloading is possible for an extra charge - In order to be able to quote an exact freight price, please send us a request with your data and your complete address

Condition: new, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, We are selling our lasers from the showroom, with only a few models available at a great price! Welding depth up to 6mm in stainless steel and structural steel. Fiber laser welding system for handheld applications. The device features a wobble function and has a maximum deflection of 0 - 4 mm. The device has 32 parameters pre-defined for various applications. The wobble function can operate in a frequency range of 0 - 300 Hz (freely selectable). Includes all necessary and legally required documents, such as CE, risk assessment, product analysis, etc. Accessories: Hedpfx Akjh Sa N Ssrjnu • Handheld laser gun with 5-meter cable • Ground wire for securing, with a 5-meter cable • Basic assortment of nozzles (for different applications) • Starter set of safety glasses for replacement in the laser gun • Includes wire feeder • For structural steel, aluminum & stainless steel up to a maximum thickness of 6mm. Technical data: Wavelength: 1060-1080 nm Operating mode: CW & pulsed Max. power: 1500 watts Connection: 220V / 50Hz / 16A Weight: 39 kg Dimensions: 667 x 276 x 542 mm (L x W x H) We provide a 12-month warranty on the entire system (excluding wear parts). ATTENTION: Laser class 4: Safety glasses / laser safety helmet are mandatory. We also recommend the use of a face shield and the use of filter technology. We will gladly provide you with comprehensive advice on laser safety. All necessary laser safety topics can be offered as optional extras. These include passive and active laser safety curtains, laser safety cabins, as well as recommendations for courses and training on the topic of laser safety. We also offer a wide selection of laser safety cabins and other laser accessories. Please contact us!

Condition: new, Year of construction: 2025, Motorized planer table with two speeds Digital display for work height Hsdpfx Ajff Efajkrjnu Planer table made of gray cast iron The planer table is supported on four large trapezoidal thread spindles for maximum stability and precision Four feed speeds Optional with two rollers in the planer table Standard with noise and chip protection curtain at the workpiece infeed and outfeed Roller pressure adjustable Front infeed roller with helical teeth Outfeed roller with rubber coating Powerful industrial motor Equipment details TERSA models with Tersa planing cutter shaft Planing cutter change in seconds When the machine starts, the planing cutters are automatically tensioned by centrifugal force - self-locking The cutter overhang adjusts automatically without the use of setting gauges Work table The work table is supported on four large trapezoidal thread spindles, which ensure maximum stability under all working conditions Standard with electric table adjustment Due to the special lifting device, the table position is maintained perfectly even without locking Helically toothed steel infeed rollers for a constant and uniform wood feed Second, rubber-coated feed roller at the outfeed Solid anti-kickback devices prevent workpiece kickback A 4-cutter shaft ensures an optimal planing result Dimensions and weights Length approx. 1305 mm Width/Depth approx. 1080 mm Weight approx. 750 kg Dust extraction connection Suction nozzle diameter, thickness 150 mm Drive power Main motor 9 kW Installation information Space requirement, length 1305 mm Space requirement, width/depth 1080 mm Space requirement, height 1197 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Machine body length 1305 mm Machine body width/depth 725 mm Length 1000 mm Width 2000 mm Explanation of work area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Thickness Planer table length 630 mm Planer table width 1000 mm Work height min. 3.5 mm Work height max. 300 mm Work length min. 210 mm Chip removal max. 8 mm Electrical data Connection voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Planing cutter shaft Type TERSA Diameter 120 mm Number of planing cutters 4 pcs Speed 4500 min⁻¹ Planing width max. 630 mm Feed Speed 5/8/12/18 m/min Location: In stock, 54634 Bitburg - immediately available -

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, spindle bore: 95 mm, turning diameter: 800 mm, turning diameter over bed slide: 800 mm, turning diameter over top slide: 530 mm, turning length: 3,000 mm, The PORĘBA TPK-80/3M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: available on stock, under power, ready for inspection Technical data: - distance between centers/turning length: 3000 mm - turning diameter over bed: 800 mm - turning diameter over support: 530 mm - turning diameter in bridge recess: 1080 mm - power on compound slide - spindle bore diameter: 95 mm - maximum workpiece weight between centers: 6,000 kg - maximum workpiece weight between centers + 1 steady: 7,500 kg - maximum workpiece weight between centers + 2 steadies: 9,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 8 - 800 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.1 – 12,8 Hedefknw Rjpfx Akrjnu transverse: 0.05 – 6,4 - engine power: 16/22 kW (1st gear / 2nd gear) - overall dimensions: total length: 5000 mm width: 1800 mm height: 1800 mm total weight: 6200 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-600 mm, with rollers - MULTIFIX quick change tool post

Condition: new, The Newpower Generator proudly presents their new NWK140 Soundproof Plus series. These generator sets are equipped with extra sound curtains in the cabins, which guarantee a 15 percent reduction in noise levels compared to the standard series. The unit is new, complete including control, diesel tank, exhaust batteries, mechanical speed controller, AVR, battery charger, cooling water heater, sockets, FI protection circuit breaker. - Reinforced soundproofing - Extra quiet operation - Grid monitoring, grid feed-in - Ready for immediate use Technical data: Model: NWK140 Soundproof Plus emergency generator Fawde Motor Newpower generator set with extra soundproofing Engine : Fawde CA6DF2-17D , 6 cylinder, water cooled, intercooler Generator: Newpower NW/N140 Continuous power: 100 kW / 125 kVA Maximum power: 110kW / 138kVA Noise level (7m): approx. 65 dB Connection: 1x5P 125A, 2x5P 63A, 2x2P 16A sockets and 5-wire cable connection Frequency : 50Hz Voltage: 400/230V RPM : 1500 rpm. Control: Comap IL4 AMF8 Year of construction: 2023 (new) Dimensions (LxWxH) : 3270x1130x2150 mm Weight: 2297 kg Tank: 300 L. (possibility to connect to an external tank) At 100% load: approx. 23.7 L/h At 75% load: approx. 18.9 L/h Hjdpfeni U R Aox Akrjnu At 50% load: approx. 12.5 L/h additional costs 250A automatic switch : 1080 € 400A automatic switch: 1620 € Shipment: - Worldwide transport including unloading is possible for an extra charge - In order to be able to quote an exact freight price, please send us a request with your data and your complete address

Condition: new, The Newpower Generator proudly presents their new NWK165 Soundproof Plus Series. These generator sets are equipped with extra sound curtains in the cabins, which guarantee a 15 percent reduction in noise levels compared to the standard series. The unit is new, complete including control, diesel tank, exhaust batteries, electric speed controller, AVR, battery charger, cooling water heater, sockets, FI protection circuit breaker. - Reinforced soundproofing - Extra quiet operation - Grid monitoring, grid feed-in - Ready for immediate use Technical data: Model: NWK165 Soundproof Plus backup generator Fawde Motor Newpower generator set with extra soundproofing Engine : Fawde CA6DF2-19 , 6 cylinder, water cooled, intercooler Generator: Newpower NW/N165 Continuous power: 120 kW / 150 kVA Maximum power: 132 kW / 165kVA Noise level (7m): approx. 65 dB Connection: 1x5P 125A, 2x5P 63A, 2x2P 16A sockets and 5-wire cable connection Frequency : 50Hz Voltage: 400/230V RPM : 1500 rpm. Control: Comap IL4 AMF8 Year of construction: 2023 (new) Dimensions (LxWxH) : 3270x1130x2150 mm Weight: 2495 kg Tank: 300 L. (possibility to connect to an external tank) At 100% load: approx. 28.2 L/h At 75% load: approx. 21.5 L/h Hedpfx Aenkag Rskrjnu At 50% load: approx. 14.4 L/h additional costs 250A automatic switch : 1080 € 400A automatic switch: 1620 € Shipment: - Worldwide transport including unloading is possible for an extra charge - In order to be able to quote an exact freight price, please send us a request with your data and your complete address

Condition: good (used), Centrifugal pump, acid pump, alkali pump, water pump for groundwater lowering pump Hodpfxjyf Augo Akrsnu -Centrigeminal pump: with stainless steel tank -Motor: 2.2 kW -Flow rate: 1900 l/min -Pumping height: 15 m -Tank capacity: approx. 500 liters -Overall dimensions: 1080/920/H1190 mm -Weight: 126 kg

Condition: used, functionality: fully functional, Year of construction: 2016, load capacity: 3,500 kg, fork length: 1,100 mm, Fork positioner Condition: Ready for use and fully functional Technical condition: good Hodjw Egmbopfx Akronu Description: Year 2016, sideshift, capacity 2000 kg, opening range 400-1080 mm, width 100 mm, forks 1100 mm, MOUNTING: Linde STANDARD 393, inside 317 mm, outside 380 mm, length 690 mm, ID OS1596

Condition: good (used), workpiece weight (max.): 80,000 kg, grinding diameter: 1,580 mm, grinding length: 7,500 mm, Manufacturer: Farrel Type: 60" x 24" Heavy Duty Year of manufacture: 1960 Travelling wheel machine with CROWNING and CONCAVING grinding Equipped with stones / flanches / lubrication / coolant system Maximum diameter full size wheel 1550 mm Work swing over bed 1580 mm Work load 180,000 pounds (81,000 kg) Grinding length 7500 mm Specifications Metric US Standard Center height 930 mm Grinding diameter Ø 1860 mm Grinding length 7500 mm Grinding stone dimensions 1080 x 180 mm Grinding stone speed 400 - 100 rpm Tailstock 260 x 1250 Mk Hnodper Ikvmofx Akrju Coolant system Yes filter Yes Dimensions (estimate) length 13200 mm width 4250 mm height 3200 mm weight 80000 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details. Share on download Travelling wheel machine with CROWNING and CONCAVING grinding Equipped with stones / flanges / lubrication / coolant system Maximum diameter full size wheel 1550 mm Work swing over bed 1580 mm Work load 180,000 pounds (81,000 kg) Grinding length 7500 mm Center height: 930mm Grinding diameter Ø: 1860mm Grinding length: 7500mm Grinding stone dimensions: 1080 x 180mm Grinding stone speed:400 - 100Rpm Tailstock: 260 x 1250Mk Coolant system: Yes Filter: Yes Length: 13200mm Width: 4250mm Height: 3200mm Weight: 80000kg Aluminum Industry Non-Ferrous Industry Paper Industry Roll Manufactures Steel Industry Plate Mill Hot Rolling Mill Cold Rolling Mill Travelling wheel machine with CROWNING and CONCAVING grinding Equipped with stones / flanches / lubrication / coolant system Maximum diameter full size wheel 1550 mm Work swing over bed 1580 mm Work load 180,000 pounds (81,000 kg) Grinding length 7500 mm Center height: 930inch Grinding diameter Ø: 1860inch Grinding length: 7500inch Grinding stone dimensions:1080 x 180inch Grinding stone speed:400 - 100Rpm Tailstock: 260 x 1250Mk Coolant system: Yes Filter: Yes Length: 519.684inch Width: 167.323inch Height: 125.984inch Weight: 176449.6lbs Aluminum Industry Non-Ferrous Industry Paper Industry Roll Manufactures Steel Industry Plate Mill Hot Rolling Mill Cold Rolling Mill Aluminum Industry Non-Ferrous Industry Paper Industry Roll Manufactures Steel Industry Plate Mill Hot Rolling Mill Cold Rolling Mill

Condition: new, functionality: fully functional, This is a 4-zone induction cooktop with an under-counter design from the manufacturer RM, model RM-SPI 780 ES, new. This induction cooktop features induction technology and the cooktop surface from the manufacturer Berner, with 5 kW of power per cooking zone. Request a price! You will receive an invoice with VAT shown. Our device service for you: New product, 1 year manufacturer's warranty High-quality brand devices at fair prices Professional overhaul / inspection & expert cleaning Checked & fully functional - or your money back Flexible shipping or self-collection options Hodpfxszp Hd Es Akrjnu Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 standard Technical data: W x D x H: approx. 860 x 820 x 1080 mm Power connection: V: 400 / kW: 20.0 / Hz: 50-60 Energy consumption of the 4 zones, each 5 kW Cooking zone size: 12-23 cm diameter Weight: approx. 108 kg Serial number: 26060055 Condition: New, fully functional Additional information: Electric device With open under-counter design, closed on 3 sides Stainless steel Operating indicator Infinitely adjustable Convenient maintenance and cleaning 4 zones Adjustable feet Induction Cross-section of the conductor CU (mm²) Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to change and errors Do you have questions, would you like advice, or would you like to see something on site? You can reach us by phone during our opening hours: Monday to Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: new, Year of construction: 2025, RST-LC1500 Advantages of the 2D Ultra-Wide Laser Cleaning Machine: A: 600–800 mm wide cleaning with ultra-wide coverage. B: Equipped with imported high-performance SOC controller. C: Various selectable 2D cleaning patterns; 14 languages available. D: Complies with European safety standards; triple safety mechanisms. E: Equipped with multiple parameter databases tailored to various operating conditions. F: High-protection safety design. G: Easy maintenance and long-term stable operation. Machine Technical Specifications: Power supply 220V 50Hz/60Hz Output power ≤5.5 kW Operating temperature 10–40°C Cleaning area Cleaning width ≤ 800 mm Cooling method Air cooled Focal length 500/800/1000 mm Weight of laser cleaning head 900 g Laser safety class Class 4 Machine dimensions 640 × 330 × 620 mm Machine weight 46 kg Packaging dimensions 850 × 650 × 900 mm Package weight 88 kg Laser Generator Specifications: Parameter name Specification Laser generator model MFSC-1500M Power adjustment range 10%–100% Laser wavelength 1080 nm Modulation frequency 1–5000 Hz Output power instability ±1.5% Optical fiber cable length 10 m Machine Configuration: Component name Brand Description Machine body DPL Professional cleaning cabinet Laser generator MAX MFSC-1500M Laser head Hydraulic / Brand 2D Super Wide Angle Chiller system Bingyue 1500W-S Price: RST-LC 1500W (230V).....€9,500 Warranty: Two-year warranty on the laser source, One-year warranty on other machine components. No warranty on consumable parts. OPTION: TERMS AND CONDITIONS Training and Installation: 1 day €600 (incl. arrival and departure) Hnedpfx Aksw Ix Dpsreu Transport Costs: Air freight: €1,200 / Sea freight: €650 Delivery: 2–3 working weeks after payment receipt for air freight 5–6 weeks by sea freight Payment: 100% due upon order and before shipping (air cargo or by sea)

Condition: new, Year of construction: 2026, overall weight: 100 kg, total height: 100 mm, total width: 900 mm, total length: 800 mm, power: 1.5 kW (2.04 HP), The XHS-series Vertical Mixer is designed for fast and uniform mixing of plastic granules, masterbatch, recycled materials, and additives before processing. Its efficient paddle mixing system provides excellent blending performance while minimizing energy consumption. The mixer features a durable stainless steel hopper and mixing blades, ensuring long service life, easy cleaning, and contamination-free material handling. It is suitable for extrusion, injection molding, blow molding, compounding, and plastic recycling applications. Technical Specifications • Model: XHS-50V • Hopper capacity: 50 L • Mixing capacity: 20 kg per batch • Mixing time: 20 kg in 6–8 minutes • Mixing motor power: 1.5 kW • Paddle speed: 50–60 rpm • Power supply: 380 V, 3-phase • Dimensions (L × W × H): 800 x 900 x 1000 mm • Construction: Stainless steel hopper and mixing paddles • Weight: 100 kg • Control system: Control box with timer relay Hedpfx Akjzvxl Isrenu • Model: XHS-100V • Hopper capacity: 100 L • Mixing capacity: 40-50 kg per batch • Mixing time: 50 kg in 6–8 minutes • Mixing motor power: 3 kW • Paddle speed: 50–60 rpm • Power supply: 380 V, 3-phase • Dimensions (L × W × H): 960 x 1000 x 1200 mm • Construction: Stainless steel hopper and mixing paddles • Weight: 150 kg • Control system: Control box with timer relay • Model: XHS-150V • Hopper capacity: 150 L • Mixing capacity: 50-70 kg per batch • Mixing time: 75 kg in 6–8 minutes • Mixing motor power: 4 kW • Paddle speed: 50–60 rpm • Power supply: 380 V, 3-phase • Dimensions (L × W × H): 1080 x 1080 x1200 mm • Construction: Stainless steel hopper and mixing paddles • Weight: 210 kg • Control system: Control box with timer relay • Model: XHS-250V • Hopper capacity: 250 L • Mixing capacity: 100–120 kg per batch • Mixing time: 120 kg in 6–8 minutes • Mixing motor power: 7.5 kW • Paddle speed: 50–60 rpm • Power supply: 380 V, 3-phase • Dimensions (L × W × H): 1400*1200*1550 mm • Construction: Stainless steel hopper and mixing paddles • Weight: 290 kg • Control system: Control box with timer relay Efficient Mixing System The XHS-250V uses horizontally rotating stainless steel paddles that provide fast and homogeneous mixing of plastic materials. The paddle geometry is designed to maximize mixing efficiency while keeping power consumption low. The robust mixing blades offer excellent wear resistance, long service life, and can be cleaned quickly between production batches. Easy Material Discharge The mixer is equipped with a bottom discharge outlet, allowing quick and convenient unloading of mixed material directly into containers, vacuum loaders, or processing equipment.

Condition: used, Year of construction: 2018, Nominal flow rate: 5087 m³/h Negative pressure Pa: 2300 Motor: 7.5 kW Dimensions: 1080 x 820 x 860 mm Weight: 154 kg Hnsdpovxk Anefx Akrou Storage location: Nattheim

Condition: new, Year of construction: 2023, The Newpower Generator proudly presents their new NWC55 emergency generator set with soundproofing. The unit is new, complete including control, diesel tank, exhaust batteries, electronic speed controller, AVR, battery charger, cooling water heater, turbocharger, sockets, FI protection circuit breaker. Technical specifications: Model: NWC55 emergency generator with sound insulation Cummins Engine Newpower generator set Engine : Cummins 4BTA3.9-G2, 4 cylinder, water cooled Generator: Newpower NW/N55 Continuous power: 40 kW / 50 kVA Maximum power: 44 kW / 55 kVA Connection: 4P circuit breaker, 1x5P 63A, 1x5P 32A, 1x5P 16A, 2x2P 16A Schuko sockets Frequency : 50Hz Voltage: 400/230V Hodjncd Diopfx Akronu RPM : 1500 rpm. Control: Comap IL4 AMF8 Year of construction: 2023 Dimensions (LxWxH) : 2400x1000x1400 mm Weight: 1213 kg Diesel tank: approx. 125 L. (possibility to connect to an external tank) 100% load approx. 10.1l/h 75% load approx. 7.9l/h 50% load approx. 5.3l/h additional costs 100A automatic switch € 620 250A automatic switch € 1080 Shipment: - Worldwide transport including unloading is possible for an extra charge - In order to be able to quote an exact freight price, please send us a request with your data and your complete address

Condition: new, Year of construction: 2023, The Newpower Generator proudly presents their new NWC77 emergency generator set with Cummins engine. The unit is new, complete including control, diesel tank, exhaust batteries, electric speed controller, AVR, battery charger, cooling water heater, turbocharger, sockets, FI protection circuit breaker. Technical specifications: Model: NWC77 emergency generator with sound insulation Cummins Engine Newpower generator set Engine : Cummins 4BTA3.9-G11, 4 cylinders Water-cooled and intercooler Generator: Newpower NW/N55 Continuous power: 56 kW / 70 kVA Maximum power: 61 kW / 77 kVA Connection: 4P circuit breaker, 5-wire cable Sockets: 1x5P 63A, 1x5P 32A -, 1x5P 16A -, 2x2P 16A Schuko sockets Frequency : 50Hz Voltage: 400/230V RPM : 1500 rpm. Control: Comap IL4 AMF8 Year of construction: 2023 (new) Dimensions (LxWxH) : 2400x1000x1500 mm Weight: 1232 kg Diesel tank: 135L 100% load approx. 17.6l/h 75% load approx. 13.2l/h 50% load approx. 9.1 l/h additional costs 100A automatic switch € 620 250A automatic switch € 1080 Hnedsncd Raepfx Akreu Shipment: - Worldwide transport including unloading is possible for an extra charge - In order to be able to quote an exact freight price, please send us a request with your data and your complete address guarantee The guarantee of the power generator within Germany is 12 months or 1000 hours from handover (whichever comes first). Provided you use the Newpower maintenance service in the maintenance intervals. Excluding user error, under Newpower international warranty.

Condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, double turntable steering, heavy-duty trailer -Handover: in its current condition as inspected -Note: Check the condition of the wheels -Heavy-duty transport wagon: Industrial trailer with single-axle steering -Beam spacing: 5860 mm / Height adjustable from 850 to 1255 mm -Load capacity: 11 t -Tires: 405/130-305 solid rubber dual tires -Overall dimensions: 7600 / 2000 / H 850 mm -Weight: 1080 kg Hnsdpfxoxuqp Ao Akrou

Condition: new, Bernardo universal lathe Solid 460 x 1000 Pro Center width 1000 mm center height 230 mm Swing diameter over bed 460 mm Swing diameter over offset 690 mm Swing diameter over cross slide 270 mm Bed width 300 mm Spindle bore 80 mm Spindle holder DIN 55029, D1-8 Speed range (12) 25 - 1700 rpm Range of longitudinal feeds (42) 0.055 - 3.065 mm/rev Face feed range (42) 0.025 - 1.386 mm/rev Metric threads (41) 0.1 - 14 mm Inch thread (60) 2 - 112 Gg/1" Quill diameter 60 mm Quill travel 130 mm Hedpfjqwkd Uox Akrjnu Quill holder MK 4 Motor power 5.5 kW (7.5 HP) Machine dimensions (W x D x H) 2300 x 1080 x 1600 mm Weight approx. 1675 kg Machine features - Modern main spindle bearing with angular contact ball bearings in precision design - Hardened and ground gears and shafts, also in the feed gearbox - Central, handy control for feeds and threads with lead and feed spindles - The gears are large, hardened and precision-ground - The speed and feed adjustment is simple, smooth-running and precisely switchable - Longitudinal and flat rapid traverse as standard to reduce idle times - The machine bed, cast in one piece, is extremely torsion-resistant and low-vibration, thus fulfilling an essential requirement for precise turning Scope of delivery - 3-axis digital readout ES-12 V with LCD display - 3-jaw chuck PS3-250 mm / D8 - Clamping disk 450 mm - Coolant device - Initial filling with Shell Tellus 46 - Fixed steady rest - passage diam. max. 150 mm - Rotating steady rest - passage diam. max. 110 mm - Quick-change steel holder with 4 inserts - Safety device for quick-change steel holder - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - Slipping clutch - Longitudinal and flat rapid traverse - Interchangeable wheels - 2 centering points - Reducing sleeve - Thread clock - LED machine light - Chip back plate - Operating tool