Used Thread Sewing Line for sale (13,234)

Condition: used, Year of construction: 1990, Overview This is a complete automatic KEG line for stainless-steel kegs, built in 1990 by Leifeld & Lemke and continuously extended and modernised over its service life. It covers the full cycle from empty-keg infeed and centring through external washing, internal cleaning, filling and full-keg checking to automatic palletising. According to the seller it runs at up to 130 kegs/h in the 30 L format in three-shift duty. Control is by Siemens SIMATIC PLCs of mixed generation (see Condition). Technical data - Manufacturer (line builder): Leifeld & Lemke Iajdozk U Hkepfx Ahzjw - Year of manufacture: 1990 (continuously upgraded since) - Machine type: complete automatic KEG cleaning and filling line - Capacity: up to 130 kegs/h at 30 L (seller-stated) - Keg formats: 20 L, 30 L, 50 L, basket fitting (Korbfitting); no slim kegs - Control: Siemens SIMATIC S5 and S7-300 (mixed generations) Scope of Delivery - Empty-keg infeed with centring column | Leifeld & Lemke | Detects intermediate layers, centres kegs for the robot | 1990 - Keg handling robot | KUKA | Loads empty kegs onto the conveyor, unloads full kegs onto pallets | approx. 2015 - Fitting tightener | Leifeld & Lemke | Re-torques loose keg fittings | 1990 - Keg inverter | Leifeld & Lemke | Inverts kegs for internal rinsing | 1990 - External keg washer | Leifeld & Lemke | Steam-heated, 2 zones (brushing and high pressure) | 1990 - Internal cleaning | Leifeld & Lemke | Caustic pre-clean (approx. 10 min dwell, for wheat beer) and main cleaner | 1990 - CIP plant | Leifeld & Lemke | 5 tanks with chemical dosing, steam-heated (seller-stated) | 1990 - Keg filling block | KHS Till | 1990 - Full-keg check-weigher | Leifeld & Lemke | With keg blow-off | 1990 - Cap placer | Leifeld & Lemke | Seats plastic caps onto the fitting | 1990 - Palletiser | Albert Frey | Served by the KUKA robot | 1990 - Electrical documentation | Circuit diagrams available as physical copies Not included: handle control, Vision Tec inspection system, labeller. No operating manual is available. Condition Used - still installed and under power, in active three-shift production and reported by the seller to be well maintained. The 1990 line has been progressively modernised: kegs were originally hand-loaded, the robot was later replaced (approx. 2015, seller-stated) and Siemens SIMATIC touch HMIs added. Control mixes Siemens SIMATIC S5 (reportedly filler, CIP and pre-/main cleaning) and S7-300 (the remaining stations, conveyors and washer); as the S5 generation is long discontinued, spare-part supply and future control integration should be planned accordingly. Availability In production until approximately April 2027; the existing and the successor line will then run in parallel, so realistic handover is from around Q2 2027. Location: Germany. Viewings in operation are possible at any time. Dismantling and removal can be arranged on request. Price on request.

Condition: used, Year of construction: 2021, Overview This compact canning line combines a Wild Goose Quick Change Gosling semi-automatic can filler, a Zomerdijk TWIST can rinser and a Crafted Goose EME automatic labeller (type JE-1100/185-S2) with a Cyklop CM220 thermal inkjet printer. Built in 2021 (filler and labeller), the line runs at up to 600 cans/hour and is compatible with 0.33 L, 0.44 L and 0.5 L can formats (currently tooled for 0.44 L cans). The filler is mounted on a wheeled base frame and includes DO buster and CO₂ regulation equipment as well as low- and high-flow foam control for beers above 4.2 g CO₂/L. The filler's production counter reads approx. 35,000 fill cycles - light craft-scale use. The line is still installed and under power, and can be viewed on request. Technical data - Line type: Small canning line (filler + rinser + labeller) - Capacity: 600 cans/hour - Can formats: 0.33 L / 0.44 L / 0.5 L (currently tooled for 0.44 L) - Filler type: Semi-automatic - Filler electrical supply: 230 V single-phase, 50/60 Hz, 8 A - Foam control: low- and high-flow, for beer >4.2 g CO₂/L - Labeller: EME type JE-1100/185-S2, automatic, with Cyklop CM220 thermal inkjet printer - Recorded use: approx. 35,000 fill cycles (production counter) - Year of manufacture: 2021 (filler and labeller) Scope of Delivery Iajdezk U Eyspfx Ahzsw - Can Filler | Wild Goose | Quick Change Gosling | Semi-automatic; wheeled base frame; DO buster and CO₂ regulation; low- and high-flow foam control; tools and basic spare parts kit; format kits for 0.33/0.44/0.50 L cans | 2021 - Can Rinser | Zomerdijk Engineering | TWIST | Infeed buffer on stand, 2 rinse cages, post-rinse collection table; for 0.33/0.44/0.50 L cans - Labeller + Printer | EME (Crafted Goose) | JE-1100/185-S2 | Automatic label application; Cyklop CM220 thermal inkjet coder | 2021 Condition Used - light craft-scale use; still installed and under power at the seller's site. The line can be visited and demonstrated on request. Availability Available now. Location: Spain.

Condition: used, functionality: unexamined, Ferwood Code: RU0008193 - Manufacturer Code: MDX61B-0110-5A3-4-00 - Condition: Used - Functionality: Not tested - Compatible Machine: CNC LIGMATECH-HOMAG - If interested, we offer an overhaul service, please contact us. Iodpfx Ahezmhxfezsaw

Condition: used, functionality: unexamined, Ferwood Code: RU0008188 - Manufacturer Code: MDX61B-0150-503-4-00 - Condition: Used - Functionality: Not tested - Compatible Machine: CNC LIGMATECH-HOMAG - If interested, we offer an overhaul service; please contact us. Iaedpjzmhwhofx Ahzow

Condition: excellent (used), functionality: fully functional, power: 91 kW (123.73 HP), fuel type: diesel, overall weight: 14,000 kg, operation weight: 14,000 kg, axle configuration: 4x4, Year of construction: 2012, operating hours: 9,651 h, Equipment: all wheel drive, pallet forks, Sennebogen 305 XL/All-Wheel Drive/Green Line Forklift/Load Handler/Telescopic Handler • Manufacturer: Sennebogen • Type: 305 XL • Year of Manufacture: 2012 • Operating Hours: 9651 hrs • Power: 91 kW/123 hp • Engine: Deutz • 1 x Extension Boom • 1 x Bucket with grapple • 1 x Fork Isdpfozlg Hlsx Ahzjaw • 3rd Hydraulic Circuit • Additional Hydraulics • High and Low Gear • Load capacity at max. reach: 2 t • Load capacity at max. lifting height: 3.5 t • Elevatable Cab: 4m • All-Wheel Drive • Air Conditioning • Transport Length: 7.30 m • Transport Width: 2.55 m • Transport Height: 2.70 m • Total Weight: 14000 kg • German Machine • Immediately Ready for Use • This offer is non-binding and subject to change. • Subject to prior sale. • Errors and/or typos excepted. • Sale subject to our General Terms and Conditions.

Condition: used, HACO ATPL CNC plasma cutter – Used Robust CNC plasma cutter for precise and efficient cutting. Specifications: Cutting bed: 3,000 × 1,500 mm Cutting capacity: up to 50 mm Ijdpfx Ahezky R Iozeaw CNC controlled Ready for immediate use

Year of construction: 2001, condition: used, Hard cover book line VBF / Muller Martini Diamant Year: 2001 Description: - Semi automatic setting Iodpfx Asyid Nwohzoaw - Book measuring table - Stand-alone pre-heating device: IR - Infeed conveyor - Starfeeder - Rounding and backing station - Glue unit - Gauzing station - Book mark suction device - Glue unit - Head and tail banding station - Pressing station - Casing-in station - Case infeed device - Case pre-stacking conveyor - Case bending station - Case forming station - Coldglue circulation pump - Hotmelt nozzle glue system for joint gluing in casing-in section Building in machine VBF / Muller Martini EP 680 L Year: 2000 Description: - Book forming station - Delivery - Delivery to the left Book stacker VBF / Muller Martini BLSD 600 D Year: 2001 Book block format (max): 380 x 270 x 80 mm (hxwxt) Book block format (min): 100 x 100 x 4 mm (hxwxt) Size range opened case (max): 660 x 390 mm Size range opened case (min): 190 x 105 mm Max. mechanical speed: 3.600 cycles / hour Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 2/360564/13, total length: 3,500 mm, total height: 2,400 mm, total width: 2,200 mm, For sale is a case packer from the brand Meurer, which sorts filled snack pouches, folds a carton, fills it with the pouches, and then dispenses the finished carton. Currently used carton formats (external dimensions) (formats can be changed): 386 x 143 x 110.5 mm 382 x 170 x 124 mm 376 x 170 x 210 mm Product formats (flow packs filled with nuts and fruit): Weight: 200 - 500 g Pouch dimensions: Product 1: 195 x 143 x 25 mm Iasdpfx Ahezl D Sxszow Product 2: 215 x 180 x 37 mm Product 3: 190 x 145 x 32 mm Product 4: 220 x 150 x 62 mm Maintenance is performed regularly. The system can be inspected while in operation.

Condition: ready for operation (used), Two custom-built machines for the automatic production of pre-grouted tile panels are available. Bonding material: two-component PU grout, max. production capacity: approx. 50m²/h, min. tile format: 97mm/97mm, max. tile format: 197mm/197mm, splitter plate format: 244mm/119mm. This is a complete production line up to the packaging stage. The PU pipes have become clogged after a long period of time and must be replaced. Including various spare parts. Documentation available. An on-site inspection is possible. Isdpfozli Tzox Ahzsaw

Condition: used, machine/vehicle number: 007357, Position 1: Panel Feeding and Loading BIESSE - RBO-STREAM SB2 9.5 Position 2: Double Sided Squaring/Edgebanding Machines BIESSE - RBO-STREAM SB2 9.5 Position 3: Panel Turning Device BIESSE - RBO-STREAM SB2 9.5 Position 4: Double Sided Squaring/Edgebanding Machines BIESSE - RBO-STREAM SB2 9.5 Position 5: Panel Turning Device BIESSE - RBO-STREAM SB2 9.5 Position 6: Panel Stacking and Offloading BIESSE - RBO-STREAM SB2 9.5 Iaedpfxswuz Rto Ahzjw

Condition: used, machine/vehicle number: 007857, Position 1: Horizontal Storage Systems IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Position 2: Beam panel saws with automatic warehouse IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Position 3: Single Edgebanders IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Position 4: Panel Feeding and Loading IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Position 5: Panel Stacking and Offloading IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Position 6: CNC Machine Centres For Routing, Drilling And Edgebanding. IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Position 7: CNC Machine Centres For Routing, Drilling And Edgebanding. IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Iodpfx Ahewuuf Dszeaw Position 8: Cardboard Cutters IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Position 9: Strapping machine IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3

Year of construction: 1985, condition: good (used), FILLETING LINE FOR FISH Item: D-1640-Baader-FilletingLine Manufacturer: Baader Consist of Model: 478 Year of manufacture: 1985 Has been used for sardines Baader in feed line consisting of: Baader mobile automatic 5 lane infeeder, type: 478 . Iajdpfjd Dtuhex Ahzow Baader mobile automatic feeder, type: 478, year of construction: 1985, 400 V, 3 Ph, 50 Hz, 5 A, 5 lanes, lane width: (5x) 40 mm, total dimensions: 3350 mm x 1300 mm x 2450 mm.

Condition: like new (used), Year of construction: 2019, Krauss Maffei Injection Molding Line including a Kraus Maffei Injection Molding Machine, Model 50/55 CX with Krauss Maffei handling unit, Model LRX 100 (serial 2118838); tray unstacking station; discharge blower, collection device and tray filling station; and Kemapack GmbH strapping/wrapping machine. Ijdpfx Ahemn Tu Hozeaw

Condition: new, Allen Bradley 2706-B22J31 DL20 2-line message display, 31k memory, unused, in opened original packaging, 100% functional. Iodpfx Ahji D Tzhezjaw

Condition: ready for operation (used), Indramat NFD 01.1-500-180 Power Line Filter (Schaffner FN351H-180-36), in very good condition, 100% functional. Ijdpfx Aei Eblajhzoaw

Condition: good (used), Complete Butter oil – AMF production line This line makes Pure Dairy Fatt from melted butter or cream by separating and evaporation. Capacity output Butteroil up to 2.000 to 4.000ltr/h Input: melted butter (72-84% fat) or concentrated cream or fat stream which already had phase inversion (45/72%). Output: Pure fat > 99.8% Fatt. A Flexible line with manual controls integrated CIP system Process and equipment description: Heater Plate heater exchanger for heating the mix to 80/90°C Complete with pumps, control valves, piping, sensors. 2 Buffer tanks Volume: approx. 8.000ltr, with agitator, stairs and frame, CIP and product valves. Feed pump make Fristam to the separators. Iajdpfx Aszki Amshzew 2 Separators: Separator 1: Concentrator Alfa-Laval model: BRPX413-XGD-14c. Concentrating up to ± 95% fat. Separator 2: Finisher Alfa-Laval model: BRPX413-XGD-14c, Concentrating up to ± 99.4% fat For each separator: The fat (light phase) is pumped out to the next stage and the water/protein (heavy phase) are separated out and ejected to a balance tank and pumped of by a separate pump. The separators have their own control panel, and a frequency converter (Danfoss VLT) on the main motor, and are mechanically complete with the inlet and counter pressure valves, water valves (for solids ejection). Evaporator Flash vacuum dryer Complete with: - Vacuum tank. - Vacuum pump. - Product pump. - Level control by float. - Vacuum controller. - Vacuum cooler - Filter on outlet. - Piping and frame. - Controls in central cabinet. - Recirculation tank with agitator placed directly next to the evaporator. - Sight glass with light to check the clearness of the final product, Concentration up to 99.8% Fatt. This is the last stage of concentrating by evaporating the last water through a flush effect where butter oil is heated under pressure and cooled and exploded in a vacuum vessel. Nitrogen injection system N2 Injection system to prevent contact with oxygen in buffer tanks. N2 injection point and its flow meter and control valve Bag filter (cloth) Sight glass with light. Serum separator Next to this there is a separator for the Sirom (heavy phase) to skim/recuperate the remaining fat in the serum and return this into the process. Buffer tank, heater/cooler and pump system are included. CIP system There is a CIP system (semi-automatic) to dose the cleaning detergent from a drum direct into the process. Including: 3 Dosing pumps, a stainless steel storage box for the Drums, injection system, pump, balance tank and controls. Ideal for concentrating a rest stream with fatt in a factory or making Butteroil from butter. Still installed in a Major Butter oil producer factory in The Netherlands.

Condition: used, Year of construction: 1997, functionality: fully functional, For sale a round log sorting line by Nurminen. 40 pockets, Scanner Finnos Fusion CU-2 with X-Ray was reinstalled in 2022. Speed 100 m/min. Maximum log input length - 6.1 m, Minimum log input length - 2.4 m, Maximum log diameter- 550 mm,, Log handling - Stationary crane, Transversal loading feeder, Number of cross conveyor chains- 6, Conveyor length of the loading cross conveyor - 34.198 m, Log singulation Log measurement - in-line, Sorting line length - 140 m, Ejectors in the sorting line - Yes, Number of ejectors in the sorting line - 40, Iedpfx Asxgt U Eohzoaw Rundholz-Sortierboxen - Concrete, steel; Sorting boxes - 40, Box length max - 7 m Box width max - 2.5m Box height max - 1.2m Continuously variable feed, Sorting by - Quality, Diameter, Length; Space requirement Length - 180 m, Space requirement Width - 30 m,

Condition: used, Used machine Used multi-spindle drilling machine Ganner Compact 30 Iodpjzk Nwdsfx Ahzsaw Equipment and technical data: 2 drilling beams with 15 spindles each Pitch 32 mm Position adjustment of drilling unit 0 - 650 mm Distance between drilling rows at least 190 mm Spindle speed 2800 rpm Motor power 2 x 0.75 kW Clamping height of workpieces max. 70 mm Working height 850 mm Compressed air connection 6 bar Availability: by arrangement Location: Solingen

Year of construction: 2016, condition: used, Number of machnines 10 0 Iodozk Rc Iepfx Ahzjaw Cycle time . /min production capacity . Control . Everything must go due to business closure: High-quality machining centers (Deckel Maho, DMG, Mazak, Spinner) & accessories, cabinets, vices, material, grinding machines, EDM machine, measuring machine, on July 16, 2026 Dear Sir or Madam, dear business partners and interested parties, Due to the complete liquidation of the mechanical engineering company Schröter Maschinenbau GmbH, we are organizing an exclusive, one-day sale for the entire company, machine, and workshop equipment. Take this opportunity to acquire professional production facilities and extensive accessories directly from the location. Prospectus & Sale Overview: • Date: Thursday, July 16, 2026 • Time: 9:00 AM to 2:00 PM • Address: Lenneperstr. 188, 42855 Remscheid • Type of Sale: Direct sale against cash payment / or upon pickup and loading. You will receive an invoice. Ex location. Excerpt from the Sales Portfolio: • Multiple CNC Machining Centers: High-precision milling and drilling centers in ready-to-use condition. • Extensive Accessories: Tool holders, clamping devices, vices, measuring technology, and precision tools. • Workshop Equipment: Heavy-duty shelving, workbenches, workshop trolleys, as well as various hand and power tools. Get an Impression: To give you a precise picture of the machines, their condition, and the available accessories in advance, we have compiled a digital overview with photos and technical details for you. Simply click on the following link: ?usp=drive_link Important Notes: The sale is strictly on an "as is, where is" basis and excludes any warranty. The buyer is solely responsible for the dismantling, disassembly, and transport of the purchased items. Please plan your visit well in advance! We will close the gates at 2:00 PM. Should it run a bit later, please feel free to contact us by phone! We look forward to your attendance.

Condition: excellent (used), Year of construction: 2026, operating hours: 100 h, functionality: fully functional, machine/vehicle number: MT1212_2026_30, working range: 1,250 mm, overall weight: 1,400 kg, compressed air connection: 6 bar, total height: 1,610 mm, total length: 2,550 mm, type of input current: AC, warranty duration: 36 months, workpiece weight (max.): 80 kg, table width: 1,250 mm, air pressure: 6 bar, input current: 16 A, table length: 1,250 mm, space requirement height: 1,610 mm, space requirement length: 2,550 mm, space requirement width: 1,770 mm, Equipment: documentation/manual, rotational speed infinitely variable, Multitapper 1212 Automatic Threading Machine CoastOne - Made in Finland Demonstration Machine Machining area: 1250 x 1250 mm Iaodpfx Ahozlhg Hjzsw Thread sizes: M2-M10 Number of spindles: 3 (optionally 4) 2 thread cutting and forming stations; 1 countersinking and drilling station Micro-lubrication for each spindle/tool station Control: TC15 touchscreen Numeric input, import of punch and NC files Warranty: 36 months after installation Immediately available; subject to prior sale Viewing under power is possible at any time by appointment

Condition: new, Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: MT1212_40, warranty duration: 36 months, Multitapper 1212 automatic threading machine CoastOne - Made in Finland New machine Iasdpfxozlhgms Ahzow Working area: 1250x1250mm Thread sizes: M2-M10 Number of spindles: 3 (optional 4) 2x thread cutting; 1x countersink drilling station Micro lubrication for every spindle / tool station Control: TC15 touchscreen Numerical entry, import of punches - NC files

Condition: like new (used), Year of construction: 2022, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, power: 56 kW (76.14 HP), coil weight: 10,000 kg, A high-performance profiling line (roll forming machine) T153 for the production of sheet metal profiles (153 mm) is for sale. Year of manufacture: 2022 Condition: Excellent (practically new equipment). The machine has only undergone minimal operation – it has processed a maximum of 50 tons of material. Main advantage: The line is completely set up, connected, and ready for immediate testing. You don’t have to wait months for delivery from the factory, nor spend large sums of money on commissioning and adjustment. The equipment is ready to be integrated into your production immediately! ⚙️ Technical specifications: Material thickness: 0.7 – 1.5 mm Line speed: 8 – 12 m/min (high productivity) Main motor: Powerful 18 kW x 2 drive Ijdpfxjy Uzzfj Ahzoaw Hydraulic unit motor: 5.5 kW Overall dimensions of the line: Length 50 m x Width 2 m x Height 1.2 m 📦 Complete line assembly: - Coil unwinder: Designed for heavy coils up to 10 tons, motor power – 11 kW. - Profiling machine T153: Main forming unit. - Automatic stacker: Length 12 m, power 4 kW (enables the automation of receiving and storing finished long products, which significantly reduces personnel costs). 🔥 Why this is a beneficial offer for your business: Minimal wear and tear: Processing only about 50 tons is considered test operation for machines of this class. You are buying a practically new machine at the price of a used one. Ready for testing: The equipment is currently connected. You can bring your own material, start the line, and personally verify the perfect geometry of the finished profile. Fast start: The machine is located directly in the Czech Republic, and it is ready for dismantling and shipment. No lengthy international paperwork or customs duties. 📍 Location: Hradec Králové, Czech Republic. Upon request, we will gladly provide additional photos and a video of the machine in operation. Call or write to inquire about the price, dismantling, and shipping conditions. We will be happy to answer all technical and organizational questions!

Condition: new, mileage: 2,628 km, power: 309 kW (420.12 HP), first registration: 06/2026, fuel type: diesel, empty load weight: 13,355 kg, tire size: 315/80R22.5, axle configuration: 6x4, next inspection (TÜV): 06/2027, fuel: diesel, color: grey, driver cabin: day cab, gearing type: automatic, emission class: euro6e, suspension: steel, number of seats: 2, total length: 7,650 mm, total width: 2,550 mm, total height: 3,190 mm, loading space length: 4,800 mm, loading space width: 2,410 mm, loading space height: 900 mm, Equipment: ABS, AdBlue, Android Auto, Apple CarPlay, Bluetooth, air conditioning, cruise control, differential lock, electric window regulation, electronic stability program (ESP), navigation system, onboard computer, power assisted steering, retarder, seat heater, tachograph, tire pressure monitoring, trailer coupling, truck registration, F - LINE 6X4 KH TIPPER Retarder, LED headlights, aluminum wheels, trailer package, technology package 3 Body description: Isdpezk H Rzjfx Ahzeaw Length (internal): approx. 4900 mm Width (internal): approx. 2410 mm (pallet width) Side panel height: 900 mm Front panel: approx. 1000 mm (subject to agreement) Subframe: fully tubular, with safety cable, with repair supports, front and rear tipping bearings from Leidinger, secured against accidental reversal Floor: 6 mm Hardox 450 steel Side walls: 4 mm Hardox 450 steel, M-JET design Left: hydraulically folding HYDROBOARD, 2 cylinders under the tipping floor Right: pivoting and folding, manually locked, with spring relief on the front panel Front panel: 4 mm S 700 steel, with short slope/chute Rear panel: 4 mm Hardox 450 steel, pivoting, opens automatically during the tipping process, with rear chute and dosing device (locking with pin) Stanchions: corner stanchions in a stable, fixed design (BORDMATIK) HYDRAULICS: • chromed tipping cylinders with pneumatic shut-off, manufactured by HYVA • main valve (control block) • pneumatic tipping actuator for the cab • with oil tank • with piston pump • with by-pass valve (due to auxiliary drive on the engine) • tipping trailer hydraulics: 2x pressure and 2x return line • with pneumatic changeover valve for tipper - trailer in the frame Additional equipment: • continuous aluminum mudguards for the 2nd and 3rd axles • tie-down points in the floor, 2 pairs of 8000 daN in the corners, with 4 pairs of folding tie-down points of 2000 daN in between, 1 pair on the front panel • underrun protection, folding, from KH, with spring relief • net hooks • broom and shovel under the floor • tie-down rods in the top rail of the side panels • contour marking Painting: • subframe bead-blasted, primed, and painted in chassis color • tipping body bead-blasted, primed, and painted in cab color

Condition: used, all stainless steel with top hold down belt water circulation net belt length 8.000 mm net belt width 900 mm adjustable speed Iaodpjzkabmjfx Ahzsw lifting unit with electrical hoists dimensions (l x w x h): ± 9.000 x 1.800 x 3.850 mm

Condition: used, mileage: 81,400 km, power: 174 kW (236.57 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,100 kg, first registration: 02/2023, emission class: euro6, color: white, suspension: steel, number of seats: 7, fuel: diesel, Equipment: ABS, air conditioning, airbag, central locking, cruise control, immobilizer system, navigation system, onboard computer, parking heater, parking sensors, power assisted steering, seat heater, sliding door, soot filter, traction control, E07 Hill-Start Assist, CF8 Sports Suspension, Z3N Night Package, Q50 Trailer Coupling, detachable ball hitch, JA7 Blind Spot Assist, T56 Electric operation for sliding door, left, T55 Electric operation for sliding door, right, FB4 AMG rear spoiler on tailgate, EY5 Mercedes-Benz emergency call system, BS1 Brake calipers with Mercedes-Benz lettering, WD0 Control code, plant 157, EY6 Breakdown assistance, G43 9G-TRONIC, CM2 Bumpers and trim in vehicle color, FS5 Illuminated mirrors for sun visors, JS1 360-degree camera, FK4 Radiator grille, painted black, FK5 Side trim strip, black anodized, FC1 Electronic key in chrome finish, JK5 Instrument cluster with color display, LG2 LED Intelligent Light System, LG4 Tail light, brake light, and turn signal in LED technology, RK1 Tires 245/45 R19, RK4 AMG light-alloy wheels 8 J x 19, polished, EZ6 Parking Package with 360-degree camera, XO7 Mercedes-Benz Mobilo with DSB and GgD, EZ8 PARKTRONIC, SE5 Lumbar support, driver's seat, SE4 Lumbar support, passenger seat, QA4 Towing capacity 2500 kg, CN1 Side sill trim, exterior, T70 Child safety lock on doors in passenger compartment, T74 Grab handle for entry, HH4 Automatic climate control system THERMOTRONIC, UR1 Seat rail system with quick-release mechanism, V33 Carpeting in the rear, E1E Digital extra: hard drive navigation, V36 Headliner, E1D Digital radio (DAB), Y10 First-aid kit, MJ8 ECO Start-Stop function, E1F Display diagonal 26 cm (10.25"), IB6 Model series C447 Vito/V-Class, ES3 12V sockets for rear seat rows, right and left, ES2 12 V socket, trunk/cargo area, F3S Exterior mirrors, painted black, VD7 Interior headliner, black, E1T Touchpad, H00 Warm air duct to passenger compartment, IK3 Luxury station wagon, HI1 Climate zone 1 (cold/comfort), W6. We are available by phone Monday - Friday until 8:00 PM and Saturday until 4:00 PM! Furthermore:! Leasing/financing and trade-in possible! ! ! Iaedpfjzl Dd Isx Ahzow -Errors and prior sales excepted! -All information without guarantee ... more on our website.