Used Tic 201 Scdel-R for sale (72,081)

Condition: new, Year of construction: 2026, Equipment: safety light barrier, 1A Gmatick Storage Paternoster (roll rack) The foil storage Paternoster foils is suitable to use for the storage of all 3D-films, it is used as a high storage at the membrane press or as a space-saving storage solution for the 3D foils. With our Paternoster you can storage on very small area approximately 2, 4m x 1, 2m a lot of film rolls (up to 32 rolls of a Ø 300 mm). The required film is thus immediately available at the push of button. Our Paternoster are available from 2.8 m up to 6, 0 m as standard Paternoster. Also special solutions are offered by us, please contact us, we will then find the right solution for your storage. As additional equipment we offer center sleeves, a manual cutting station or the full automatic cutting device and we have also ionization solutions available at Gmatick. • Storage rods ø 42.4 mm • Sleeves inside Ø max. 82 mm,. • Load chain as a hollow pin chain with a breaking load of 100 kN, Knodpfx Aoff Huweg Asc • Chain pitch is 50 mm hole to hole and this is the raster for the positioning of the mounting foil bars. • Control with a key switch (dead man) for on / off • Rotational speed of the chain is approx. 5.5 m / min • Voltage 400 V, 3N; 50/60 Hz or as USA Version 480V 60Hz • Mains cable with CEKON plug 16A fuse protection (by the customer) 10A slow blow • ground load data at least 2, 2 kg / cm² • Side covering over the entire height of the Paternoster, guards from 2, 2 m above floor to top edge of the Paternoster. • Requirement for the installation of the Paternoster is a viable, flat and solid floor, • Floating floors you can’t install a Paternoster. It is forbidden

Year of construction: 1990, condition: used, 2. Tool turret heads, manufacturer DUPLOMATIC, year of manufacture approx. 1990, type: BSV-N250 8/20-110/50. Tool holder size VDI50. Kodpfx Aebaf Spsg Asnc Tool stations: 8. Center height: 125 mm. Price per piece.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, REF: MM5770 1 x Cime Careddu automatic inline rinsing and filling machine for 1L bottles. Suitable for filling glass and PET bottles. Ksdpfxsulpmzo Ag Ajnc Manufacturer - Cime Careddu Srl Model - SILVER 16/16 (16 x heads). Date of manufacture - 2012. Can handle and fill bottles up to 2 litres in capacity but this unit is supplied with change parts for 1 litre bottles. Overall dimensions - 2.8m L x 1.7m W x 2.25m H. In operation until January 2025, can be viewed working until this point. This unit is a very reliable system and has been very well maintained, used for 30-40 hours (approx) per week. 

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 850 kg, fuel type: diesel, color: yellow, power: 22 kW (29.91 HP), output current: 39 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 22 kW (29.91 HP), nominal power (apparent): 28 kVA, continuous power: 22 kW (29.91 HP), continuous power (apparent): 28 kVA, total length: 2,100 mm, total width: 950 mm, total height: 1,200 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Yunnei STAGE V, type of cooling: water, HELVETICA POWER offers: 22 KW 28 KVA generator / diesel generator ⭐️ Stage V (EU) / Euro 5 compliant - suitable and approved according to the current emission standards for Europe. ⭐️ In an oil-tight chassis, e.g., for construction sites, industry, agriculture, and much more. ⭐️ CE-compliant according to applicable regulations. ⭐️ Soundproof (Super Silent) version. ⭐️ With an emergency power changeover switch / ATS (Automatic Transfer Switch) for emergency power operation. ⭐️ Digital control + built-in remote control. ⭐️ Yunnei Stage V diesel engine suitable for continuous operation. ⭐️ Stamford type (CN license): "CE" certified, high-quality synchronous alternator "brushless" with 100% copper winding. ⭐️ AVR system (load-dependent voltage regulation / Automatic Voltage Regulation). ⭐️ The generator is supplied with a very practical, sturdy yellow tarpaulin cover. Warranty / Guarantee / Service ⭐️ One year factory warranty! ⭐️ Optional: 2-year warranty / guarantee, which extends far beyond the usual (can be extended if required). ⭐️ Our insurance partner: Allianz Suisse / Allianz Germany (for Europe). ⭐️ Service available throughout Switzerland and Europe. Payment / Delivery ⭐️ Payment: upon purchase. ⭐️ Delivery possible throughout Europe (mainland) for an additional charge. 🚚 Collection: at the Kefikon (TG, Switzerland) or Konstanz (Germany) warehouse. 🚚 Worldwide delivery on request. 👍 Dealer inquiries welcome - contact us! ⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️ Other Models & Configurations ⭐️ Other power classes available (approx. 7 kW to 100 kW). Kjdpfjzwfb Sox Ag Aonc ⭐️ Stage V (EU) / Euro-5 compliant versions. ⭐️ Alternative engine options possible (e.g., Cummins, Deutz, Volvo). ⭐️ Optional equipment: larger tank, additional tank, tank and water heating. ⭐️ Many variants available from stock in CH / DE. ⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️ Keyword list: generator, power generator, emergency power generator, emergency generator, power generator, energy generator, power unit, unit, mains replacement system, NEA, emergency power, backup power, backup electricity, power supply, power source, self-sufficient power supply, island operation, construction site power, construction site generator, event power, camping power, outdoor power supply, diesel generator, gasoline generator, gas generator, inverter generator, synchronous generator, asynchronous generator, three-phase generator, AC generator, 230V generator, 400V generator, high-voltage generator, small generator, industrial generator, professional generator, high-performance generator, quiet generator, silent generator, soundproof generator, mobile generator, portable generator, stationary generator, home emergency power, commercial power, industrial power, agricultural generator, construction site equipment, workshop power, server emergency power, PV emergency power, hybrid generator, ATS, automatic transfer switch, power distributor, CEE generator, high-voltage connection, generator with AVR, voltage regulator, power generator, power unit, emergency power unit, diesel unit, construction site unit 22 KW 28 KVA 30 KW 38 KVA 34 KW 43 KVA 44 KW 55 KVA 19 KVA 15 KW 38 KVA 30 KW 63 KVA 50 KW 125 KVA 100 KW 100 KVA 80 KW

Condition: excellent (used), functionality: fully functional, ABB Robotics IRB 2400L S4C+ M2000 robot, complete Controller: S4C+ M2000 Number of axes: 6 Max. payload: 7 kg Max. working range: 1800 Used – normal signs of wear. Further details, article numbers, and images available upon request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight, and desired delivery conditions. Shipping costs to foreign countries upon request – please specify country, city, and postal code. Freight costs upon request – please specify the delivery address. Knedpfxszlyf Is Ag Aec

Condition: used, Thermo Fisher Scientific KingFisher FLEX Magnetic Particle Processor 4 units available Manufacturer: Thermo Fisher Scientific Model: KingFisher FLEX Equipment Type: Automated Magnetic Particle Processor / Nucleic Acid Purification System Application: Automated DNA/RNA purification and sample preparation Knodjz I S D Sepfx Ag Aoc Description: The Thermo Fisher Scientific KingFisher FLEX is an automated magnetic particle processing system designed for high-throughput purification and sample preparation. The KingFisher FLEX uses magnetic bead technology to automate the processing of biological samples, providing consistent and reproducible purification of DNA, RNA, proteins and other biological targets. It is widely used in molecular biology, genomics, biotechnology, pharmaceutical research and clinical laboratory environments. The system is particularly suited to laboratories looking to automate repetitive sample preparation and purification workflows while reducing manual handling and improving throughput. Key Features: Automated magnetic bead-based sample processing Designed for high-throughput laboratory workflows Suitable for DNA and RNA purification Can be used for protein and other biomolecule purification applications Programmable automated processing protocols Consistent and reproducible sample preparation Suitable for research, biotechnology and pharmaceutical laboratories Multiple plate formats supported depending on configuration User-friendly automated operation Compact laboratory footprint Typical Applications: DNA purification RNA purification Nucleic acid extraction PCR sample preparation Genomics and molecular biology Next-generation sequencing workflows Protein purification Pharmaceutical research Biotechnology research High-throughput sample preparation Removed from pharma plant in Cork, IE. Devices are in very good condition. Sold as seen ----- Keywords: Thermo Fisher, Thermo Scientific, KingFisher FLEX, King Fisher Flex, KingFisher Flex Purification System, magnetic particle processor, magnetic bead processor, DNA extraction, RNA extraction, DNA purification, RNA purification, nucleic acid extraction, sample preparation, automated sample preparation, molecular biology, genomics, biotechnology, pharmaceutical laboratory, laboratory automation, PCR preparation, NGS, next generation sequencing, protein purification, research laboratory equipment, scientific equipment, lab equipment.

Condition: used, Year of construction: 1984, functionality: fully functional, thread length: 48 mm, total length: 75 mm, metric thread diameter (min.): 2 mm, metric thread diameter (max.): 6 mm, Ingramatic RP 1 # 451 1984 230-600 pieces Ksdpfx Agsy D Nghe Aonc 2.5–6 mm Blank length: 4–75 mm Thread length: 48 mm Tool dimensions: 95/85x25x48 Power: 12 kW

Condition: used, mileage: 1 km, power: 1 kW (1.36 HP), first registration: 09/2008, empty load weight: 400 kg, maximum load weight: 1 kg, overall weight: 401 kg, axle configuration: 4x4, brakes: other, driver cabin: other, gearing type: other, emission class: none, number of seats: 1, Equipment: all wheel drive, Fiedler front outrigger FFA 400 M-K, For attachment to Multicar, Outreach up to approx. 4.00 m per skidding frame width (1.65 m), Swivel from right to left outreach, FIEDLER quick-change system, Outrigger weight: 400 kg, Year of manufacture: 2008 If new TÜV approval is required, we will be happy to provide you with a quote from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. Kjdpfxjxl Sk Ae Ag Asnc - .

Condition: ready for operation (used), * Brand: Bakker Magnetics Knjdpfx Ageywnc Us Asc * Model: permanent magnetic block * Type: Neodymium * Dim. block: length 1150 mm, width 180 mm, height 80 mm.

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Ksdpfx Ajyug Hxsg Asnc Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. Knjdpfxsyug R Rs Ag Aec The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module

Condition: used, mileage: 71,886 km, power: 90 kW (122.37 HP), first registration: 08/2013, overall weight: 5,600 kg, fuel type: diesel, color: orange, gearing type: automatic, emission class: euro5, Year of construction: 2013, total length: 5,165 mm, total width: 1,710 mm, total height: 2,210 mm, number of seats: 2, Equipment: ABS, air conditioning, all wheel drive, soot filter, Multicar M30 FUMO-Carrier H FH1 Hydrostatic 4x4 Long Wheelbase 3.0l Diesel Engine 90KW/122HP Euro 5 with Quick-Change Ball System and Large Municipal Hydraulic System, Municipal Orange RAL 2011 ---- First registration: 23/08/2013 Mileage: 71,886 km Hydraulic operating hours: 3,446 h Previous owner: Municipal vehicle, 1st owner ---- * Iveco engine 3.0l, 90KW/122HP, EURO 5 with DPF * Permissible total weight 5,600 kg * Standard cab * Air conditioning * KWS ball quick-change system * Prepared for 2x trailer couplings: ball head and automatic coupling – towing capacity 3,500 kg * Switchable all-wheel drive with mechanical differential lock and reduction gear * Large municipal hydraulics with all available additional options * Implement control panel with power supply * Yellow beacon * Heated and electrically adjustable exterior mirrors * Additional mirrors left and right * Light bracket + additional work lights * Radio with CD player * Adjustable ISRI air-cushion driver's seat * Front mounting plate for attachments, quick-change system SWV 500 * Wide winter tires 285/65R16 Goodyear Winter service equipment: * New professional snow plough for municipal use, 2.00m width * Alternatively with Fiedler V-snow plough FKP1710 * Stainless steel spreader body Schmidt Stratos B11-18 VAX with control system ---- Immediately operational and ready-to-use vehicle from first owner, in good condition! New technical inspection/emissions test ---- Your contact for this vehicle: Daniel Seidler Tel: Mobile: (also WhatsApp) Email: Knsdsyk N Ecspfx Ag Asc ---- Errors and modifications excepted!

Year of construction: 2022, condition: used, functionality: fully functional, machine/vehicle number: SPE-Spero QTX-340, The device was used for research purposes. SPE-Spero QTX-340, MIR microscope with 'Hyper Spectral Imaging' capability. Spectral coverage of the fingerprint region (1900 - 950 1/cm). High-Resolution IR Objective: 12.5X; NA: 0.7, 650μm FOV. Enhanced LowMag Lens Visible: 4.0X; NA: 0.13, 650μm FOV. 480*480 pixels, Broadband Microbolometer Camera, Visible camera. QT-Laser-Performance-Package including high precision automated stage (< 1μm repeatability). High-speed data acquisition, joystick, control computer, Win10. 'Discrete Frequency IR Imaging' in real time. Transmission and reflection mode. 4000 hours laser active time. Knedpfxey Dcd He Ag Aoc

Condition: new, Tilting Transfer Table Brand: Pertici Model: BF TEA 20-14 Tilting and extendable assembly table for the production of sashes and frames. Complete with pneumatic retractable roller conveyor. Work surface with profiles equipped with anti-scratch gasket. Dimensions: Minimum width: 2,000 mm Knsdpey A Imdefx Ag Ajc Maximum width: 3,900 mm Minimum depth: 1,374 mm Maximum depth: 2,400 mm Working height: 932 mm

Condition: used, mileage: 74,178 km, power: 90 kW (122.37 HP), first registration: 08/2013, overall weight: 5,600 kg, fuel type: diesel, color: orange, gearing type: automatic, emission class: euro5, Year of construction: 2013, total length: 5,165 mm, total width: 1,710 mm, total height: 2,210 mm, number of seats: 2, Equipment: ABS, air conditioning, all wheel drive, soot filter, Multicar M30 FUMO-Carrier H FH1 Hydrostatic 4x4 Long Wheelbase 3.0l Diesel Engine 90kW/122hp Euro 5 with quick-change ball coupling system and large municipal hydraulics in municipal orange RAL 2011 First registration: 23.08.2013 Mileage: 74,178 km Operating hours (vehicle): 6,841 hrs Operating hours (hydraulics): 4,550 hrs Previous owner: Municipal vehicle, one owner - Iveco engine 3.0L, 90kW/122hp, EURO 5 with DPF - Permissible gross weight: 5,600 kg - Standard cab - Air conditioning - KWS ball coupling quick-change system - Pre-installed for 2x trailer coupling (ball head and towing jaw) – towing capacity 3,500 kg - Selectable all-wheel drive with mechanical differential lock and reduction gear - Large municipal hydraulic system with all available additional options - Implement control panel mounting kit with power supply - Amber beacon - Heated and electrically adjustable exterior mirrors Kedpfexyr Uqjx Ag Aonc - Additional mirrors left and right - Light carrier + additional mounted work lights - 2 rear work lights - Radio with CD player - Adjustable driver's air-suspension seat (ISRI) - Front mounting plate for attachments, quick-change system SWV 500 - Wide winter tires 285/65R16 Goodyear Winter Service Equipment: - New professional snow plough for municipal use, 2.00 m wide - Optionally with Fiedler V-snow plough FKP1710 - Spreader unit Epoke S2400 HS with brine tank and controls Ready-to-drive and fully operational vehicle from first owner, in good condition! Main inspection/emissions inspection new Your contact for this vehicle: Daniel Seidler Tel: Mobile: (incl. WhatsApp) Email: Errors and subject to change!

Condition: ready for operation (used), Heidenhain .344 712-01 A5 card, 323257-06, serial number 10454064A. Circuit board, used, shows normal signs of wear, 100% functional. Scope of delivery as shown in the photos. Knsdsz Tbfkopfx Ag Aoc

Condition: used, Model North - South, clock wise rotation Belt width 600 mm Tiers 32 pcs. Product gap max. ± 89 mm Belt length ± 425 m Infeed height 800 mm Outfeed height 5.800 mm Cooling Freon Power 3 x 400V, 50Hz 45 kW total connected power Ksdpfxsz Rl D Se Ag Aonc Required cooling capacity: 150 kW Dimensions (l x w x h) : ± 5.660 x 8.080 x 6.530 mm motor compressors and panels not included

Condition: used, In this offer you are purchasing a used "Plockmatic RCT II" brush trimmer Object of sale: 1 x Plockmatic Trimmer RCT 2.0 Rotation, creasing and 2-sided trimming For various Xerox models Counter readings: Total: Approx. 987 booklets Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). Knsdpeqyb U Ssfx Ag Asc The device has been tested for function Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Condition: ready for operation (used), Heidenhain UM 121BD, ID: 667942-01, Inverter, Serial Number: 34007724A – complete with test report. This item has been fully overhauled and comes with a 3-month warranty. Used, in good condition, 100% functional. Scope of delivery as shown in the photos. Kodpfo Aaxg Dsx Ag Aenc

Condition: used, Year of construction: 2019, operating hours: 2,596 h, load capacity: 2,500 kg, lifting height: 3,000 mm, fuel type: gas, gearing type: automatic, Equipment: head guard, * Toyota Tonero 02-8FGF25 Knodj Aaucbjpfx Ag Aoc * Operating hours: 2596 hours * Year of manufacture: 2019 * Own weight: 3800 kg * Max. load capacity: 2500 kg * Max. lifting height: 3000 mm * Fork positioner * LPG gas

Condition: used, TM Bohrtechnik TMB 25 drilling rig, year of manufacture: 2011, compressor operating hours: 5,308 h, diesel engine operating hours: 8,002 h, 5x drilling rods, drilling head, dust collector, immediately ready for use, in good condition, German machine. Upon request, we will provide a leasing or financing offer from Mercedes-Benz Bank. Mr. Ebert (Tel. ) will be happy to assist you. For more information, please visit our website. Errors and prior sale excepted! Kodpfszm Eq Eox Ag Ajnc = Further information = Year of manufacture: 2011 Intended use: Construction Please contact Tobias Ebert for further information.

Condition: used, Trumpf Type: TC 6000 L 1300 Laser and punching machine Technical data: Power supply: 400V/50 Hz Fuse rating: 3 x 100 A Connected power: 65 kVA Working area X x Y without repositioning: Combined operation: 2585 x 1280 mm Punching operation: 2585 x 1370 mm Laser operation: 2585 x 1280 mm Performance: Laser: 2000 W Maximum sheet thickness: 8 mm Maximum punching force (including 20 kN holding-down device): 220 kN Active holding-down device (programmable in stages): 4.5-20 kN Maximum workpiece weight: 200 kg Maximum clearance height: In punching operation: 35 mm In laser operation: 22 mm Speeds: X-axis: 90 m/min Y-axis: 60 m/min Simultaneous movement: Punching: 900 min Marking: 2800 min C-axis: Punching: 60 revolutions/min Thread forming: 330 revolutions/min Tools: Tool stations on linear magazine: 19 with 2 grippers Number of tools when using a multi-tool: 19 to 190 tools Rotation of all tools: 360° Tool change time: 1.5-5 s Maximum punching diameter: Single stroke: 76.2 mm on all tool stations Standard multi-cut: 200 mm Maximum bending height: 25 mm Maximum part size: 500 x 500 mm Accuracy: Kedpfozd Ulasx Ag Aonc Positioning deviation: ± 0.1 mm Average position spread: ± 0.03 mm TRUMPF CNC control: Base: Siemens SINUMERIK 840D Loading and dismantling must be handled by the buyer! Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Thermo Fisher ARCTIC A25 Technical data: Controller type: SC150 Capacity: 12 l Communication: RS232, RS485, Ethernet/LAN, analog I/O Cooling capacity: 500 W Flow rate: 17 l/min Pump type: Pressure pump, suction pump Temperature range: -25°C to +100°C Max. pressure: 300 mbar Knodpfxszgcgds Ag Aec Temperature stability: 0.02°C Dimensions (L x W x H): 48.3 x 27.3 x 71.1 cm Length: 48.3 cm Internal length: 18.4 cm Width: 27.3 cm Internal width: 17.3 cm Height: 71.1 cm Internal depth: 20.4 cm Weight: 36.1 kg Electrical requirements: 230 V 50 Hz Voltage: 230 V Frequency: 50 Hz Condition: used Scope of delivery: (See images as shown) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, axle configuration: 3 axles, first registration: 08/2007, color: other, Year of construction: 2007 Empty weight: 5.500 kg Axle 1: left 4 mm right 4 mm Ksdpfx Aeza T Uysg Aenc Axle 2: left 6 mm right 6 mm Axle 3: left 4 mm right 4 mm We have the possibility to stack trailers!

Condition: good (used), mileage: 579,849 km, power: 309 kW (420.12 HP), first registration: 02/2015, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Equipment: AdBlue, EBS, air conditioning, airbag, cruise control, electric window regulation, power mirror, General information Year of construction: 2015 Technical information Number of cylinders: 6 Axle configuration Brakes: disc brakes Front axle: Steering; Suspension: leaf suspension Rear axle: Double wheels; Suspension: air suspension Weights Empty weight: 7.555 kg Carrying capacity: 11.445 kg GVW: 19.000 kg Condition Technical condition: good Visual appearance: good Additional information Knedpfx Agoz Rqcto Ajc Please contact Arie or Pedro for more information = Additional options and accessories = - Climate control - Heater - Heavy duty engine brake - Radio/Cd/Audio system - Radio/CD player - Sleeper cab - Speed limiter - Visor