Used Titan Sc43 for sale (149)

Condition: good (used), 1 x Carrot Line and Grader system Can also be used for potatoes, onions, beet root and brussel sprouts etc. System will be coming out of production end of May/early June. All equipment has had a full service and checked over during the spring period for the coming year. Haith Screen Bits Remover. The Screen Bit Remover continuously removes broken fragments of crop and debris from the produce flow. Carrots are transferred onto a traveling screen with a set size aperture. As the screen is conveyed forward, two full-width agitators gently move the crop causing any bits and debris to drop on to a waste conveyor below where the produce is taken over the end. The screen and agitator speeds are variably controlled individually to suit the various crop conditions. Grader / sorter Odenberg Titan 2 automatic camera grading system – installed in 2008. Titan 2 Sorter 6002.2, 3-way carrot sorter. The first sorter removes product that is not usable, damaged etc to the waste line. The second sorter removes short carrots, twisted and misshaped which are sent directly to the value tank. All the rejects go through the positive sorting area and the grading operative throws back any product that is fit for value sale. High capacity and low maintenance sorting machine Flexible sorting machine with gentle handling assured Quality control and feedback accessible through intuitive touch screen Consistent long-life accuracy. Grading Station. The grading operatives throw out any unusable product to the waste line via the positive grading area. Two to four graders can operate here depending on the quality of the produce. Wyma Lift Roller Sizing Grader – installed in 2019 The product is divided into five grades. 500g, 0-25mm, this goes to the value tank. Ncsdpov I S D Sofx Ac Tou 1kg, 25 – 42mm max. Loose min 30 – 45mm max. Lumpers, min 45mm upwards. Oversize. The Wyma Lift Roller Sizer is a diameter grader suitable for a wide range of fruits and vegetables including carrots, potatoes, parsnips, beets, citrus, onions, bulbs, brussel sprouts, rutabaga and other round or tubular products. It is extremely versatile, offering multiple size outputs at high capacity in one machine. It can cater for a large range of product sizes and shapes through a selection of different roller options. Product size ranges, or size bands, are created by adjusting the spacing between the rollers, at defined locations, along the length of the machine. The Lift Roller Sizer is made from stainless steel and food-grade plastic materials. Five Lift Roller Conveyors. All supporting framework available. *Video available on request* Located in Wexford, Ireland. Buyer to collect – machinery will be dismantled and loaded to your vehicle. UKFM2-6653

Condition: used, mileage: 99,766 km, power: 110 kW (149.56 HP), first registration: 06/2021, fuel type: diesel, next inspection (TÜV): 06/2027, fuel: diesel, color: grey, driver cabin: other, gearing type: automatic, emission class: none, suspension: other, number of seats: 2, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, sliding door, soot filter, traction control, trailer coupling, * Appointment scheduling for consultation and test drive = shorter waiting times: * Time is valuable, and you shouldn't spend it waiting. That’s why we kindly ask you to arrange an appointment by phone for consultation or a test drive. * Service booklet * Non-smoker * This vehicle has a well-maintained service history. * Last service performed at 93,919 km. TRANSMISSION / CHASSIS * 7-speed transmission – DSG dual-clutch gearbox * Body variant: Standard roof Njdsygzryopfx Ac Tjcu * Panel van EXTERIOR * Seat belt warning system (driver’s side) * Bumpers in grey * Metallic paintwork * Exterior mirror housings and door handles in black LIGHTING & VISIBILITY * Interior LED lighting in cargo/cabin compartment * Exterior mirrors, convex, left * Exterior mirrors, convex, right * Headlight range control ENTERTAINMENT * Discover Media audio navigation system with streaming & internet function (touchscreen, USB) * Mobile online services App-Connect (wired and wireless) * Voice control * Mobile phone interface * 4 speakers: 2 tweeters, 2 woofers * Preparation for We Connect and We Connect Plus ASSISTANCE SYSTEMS & SAFETY * Driver assistance system: Parking sensors front and rear * Driver assistance system: Brake Assist (HBA) * Driver assistance system: Multi-Collision Brake * Driver assistance system: Crosswind Assist * Headrests, front and rear, height adjustable COMFORT * Steering column (steering wheel) adjustable * Climatic air conditioning (cab) * Door panels unpainted * Cab seats: driver and passenger seat heated * Cab seats: driver's seat height adjustable * Lockable glove compartment * Heat-insulating glazing * Power sockets (12V outlets) in cab (2 units) * Without armrests on cab seats * Special interior noise insulation MISCELLANEOUS * Trailer hitch: fixed ball head * High partition wall with fixed window in load compartment * Fuel tank: 70 liters * EcoProfi * Partial hardboard lining in cargo/cabin compartment * Truck registration * Laminated safety glass windshield * Cab floor covering: rubber * Standard hinges for rear doors/tailgate * Step lighting in passenger/cargo area * Permissible total weight 2.80 t * Engine 2.0 L – 110 kW TDI * Standard air filter * Interior sill protection (plastic) * Single-tone signal horn * Operating voltage 12 V * 4th generator 2.0L engine unit 04L.Y * Left seat, 1st row * Wheelbase 3,000 mm * On-board literature in German * Digital radio reception (DAB+) * Voice control system * Multi-function display Plus * Daytime running lights * Driver/passenger airbag * Sliding door right, cargo/passenger compartment * Driver assistance system: Hill hold assist * Diesel particulate filter * Start/stop engine system * Emergency call system * Cab seats: lumbar support, driver's seat * Fatigue detection * Multi-function display Plus with black-and-white screen * Registration for up to 3 seats * Volkswagen AG, Hanover * Titan Black / Titan Black-Palladium / Black * Description not found * Navigation function/preparation * 1 waste bin for door storage compartments in cab * High partition with window * and much more * The above information is provided without guarantee. It does not constitute agreed characteristics. Subject to error and prior sale. * Our services: * Financing available even without down payment * Registration service * Trade-in of your used car: * Delivery

Condition: used, mileage: 26,325 km, power: 84 kW (114.21 HP), first registration: 05/2021, fuel type: gasoline, empty load weight: 1,528 kg, overall weight: 2,250 kg, next inspection (TÜV): 08/2027, fuel: regular/benzine 91, color: silver, driver cabin: other, gearing type: mechanical, emission class: none, suspension: other, number of seats: 2, total length: 4,853 mm, construction height: 1,820 mm, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, sliding door, traction control, * Scheduling an appointment for consultation and test drive = shorter wait times: * Time is valuable and should not be spent waiting. Therefore, we kindly ask you to schedule an appointment by telephone for consultations or test drives. * Service booklet * Non-smoker vehicle TRANSMISSION / SUSPENSION * 6-speed transmission * Front suspension * Rear suspension, high ground clearance chassis APPEARANCE * Factory-tinted windows * Metallic paint * Interior trim: Matte decorative inserts * 15-inch rear disc brakes * Bumpers in grey * Alloy wheels LIGHT & VISIBILITY * Heated rear window * Heated front washer nozzles * Headlight range control ENTERTAINMENT * Composition audio system (USB, Bluetooth, color touchscreen display) * Speakers (4) * ECE region code for radio * Prepared for We Connect and We Connect Plus ASSISTANCE SYSTEMS AND SAFETY * Rearview camera * Front and rear park assist * Driving assistance system: Multi Collision Brake * Electric parking brake with Auto-Hold function COMFORT * Air conditioning * Sliding door on the left * Sun visors without mirror OTHER FEATURES * High partition wall with window in cargo area * Body type: Panel van * Truck registration * Rubber flooring in passenger/cargo area * Fixed side windows in front left and right cargo/passenger compartment * Operating voltage 12V * Instrument cluster (km/h) with displays for speed, total/daily mileage, revs, fuel level and clock * Auto-dimming interior mirror * On-board documentation in German * Digital radio reception (DAB+) * Bluetooth interface for mobile phone * Roof rail/carrier preparation * Automatic headlight control (ALS) * Emergency call system * Sliding door on the right * Start/stop system * LED headlights * Heated front seats * Winter package * Multimedia interface 2x USB (Type C) front * Tailgate with window and closing aid * Full wheel covers / hubcaps * Exterior mirrors black, unpainted * Standard tail lights Nedpfx Aoxy T Tbjc Tecu * Windscreen wipers with interval control and light sensor * Silver sliding door rail cover * Exterior door handles black, unpainted * Plastic door trim * Open glove compartment * Lashing eyes in the luggage/cargo area * Driver assistance system: Driver fatigue detection * Wheelbase 2970 mm * Low emissions according to Euro 6d emission standard * Engine 1.5L - 84 kW 16V TSI * Model/type badges * Factory initial fuel fill (5 liters) * Plastic gear lever * Cargo * Titan Black/Soul-Soul/Black * Rear axle weight version 1 * Volkswagen Poznan Sp. z o.o., Poznan * Washer fluid level indicator with larger reservoir * Seats left and right, first row * Brake servo * Permissible gross weight 2,250 kg * DPBC * Description not found * ...and much more * The information provided is without guarantee. It does not constitute an agreed quality specification. Subject to errors and prior sale. * Our services: * Financing possible even without down payment * Registration service * Trade-in of your current car * Delivery available * Tire service, winter and summer tires available for an extra charge * We also speak multiple languages: * English, French, Spanish, Italian, Russian, Turkish, Serbian, Czech, Croatian, Bosnian, Macedonian, Slovenian, Bulgarian, Slovak * We look forward to your visit!

Condition: used, Year of construction: 1986, functionality: fully functional, AUTEFA Bale Press LIFT BOX - semi-automatic bale press Ncodpfxjytb Sgj Ac Tsu - 2-chamber system - pre-press - final press - automatic TITAN strapping machine - control unit renewed in 2015 - hydraulics completely renewed in 2018 - condenser new in 2012 - fork bale removal trolley - transport segments (roller conveyors) - turntable - roller conveyor scale - roller conveyor lift table - packaging material - bale size WxLxH 1250x750x1100 mm - bale weight approx. 330 kg - daily throughput 25-30 t System available 2x (price per unit) Please note that disassembly, packing, and shipping/collection must be carried out by the buyer.

Condition: new, Year of construction: 2026, ZGR-3640/0.8 Warrenty: 12 months Certificate CE Eccentric pressure that is transferred to both sides of the machine Working length: 3640mm to the plate thickness of 0,8 mm STEEL SHEET 0,8 mm TITAN-ZINC-PLATE 0,8 mm, ALUMINIUM SHEET 1,2 mm , COPPER PLATE 0.8 mm, NIRO-SHEET 0,5 mm , Bending beam: 24 mm Bending angle: 145 degrees Cutting in the whole working length, Lift the upper beam in three layers, maximum width between the beams 80 mm rear frame for holding sheet, Ncodpfscka N Uox Ac Tsu weight: 650 Kg Shears - with regulation of scissors guide and the rolls, which are made of high-alloy steel of very high resistance to wear. This allows cutting of sheet metal over a very long period without sharping the rotary shear. The performance of the rotary shear is about 40km sheet with a thickness of 0.5 mm - up to the first sharpening. The shears can be sharpened on average 35 times. The rotary shear weighs about 6.5 Kg. The price of this item does not include VAT. For invoice, we need the active VAT No. We provide VAT invoices from the tax rate of 0%. If you wish to order private, you should contact us.

Condition: new, The TITAN 43/20 CD+E firewood processor with joystick control cuts logs with a maximum diameter of ø 43 cm using a harvester bar and splits them with a splitting force of 20 tons. This is a combination machine (electric and PTO connection). Demonstration and inspection by appointment possible – the machine is currently in stock and available immediately. Warehouse clearance – special price – interim sale reserved. Ncedpjtrmg Hsfx Ac Tou

Condition: excellent (used), functionality: fully functional, mileage: 14,769 km, power: 110 kW (149.56 HP), color: white, first registration: 04/1998, chassis manufacturer: Bucher, total length: 6,000 mm, emission class: euro2, overall weight: 5,900 kg, empty load weight: 4,100 kg, Year of construction: 1998, Equipment: all wheel drive, differential lock, full service history, parking heater, power assisted steering, TÜV (roadworthiness inspection) will be newly performed. Truck registration. The Bucher is in an almost new condition, coming directly from an official authority (Army). It has been excellently maintained and has a complete service history—see attached photo. The bodywork is in good used condition. The Duro is equipped with: automatic transmission, all-wheel drive, differential lock, 2 front seats, tire size 10.5R20, fully automatic ZF transmission. The unladen weight is 4,100 kg, gross vehicle weight is 5,900 kg, displacement 3,747 cm³, 24-volt electrical system. Upon delivery, the Bucher not only comes with TÜV but also runs reliably. :-) The Duro is ideal as a hobby vehicle, but also well suited for daily work use. All my vehicles are listed on my homepage. Why drive back and forth from Flensburg to Berchtesgaden to view various vehicles when you can find over 150 vehicles of the following types here: Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Class, Mowag, DB, etc.—all with TÜV as well. Plus, there's an incredible selection of spare parts and accessories. Why settle for less? Give me a call. Best regards, Philipp from D_MAX (Titans of Steel). Nedpfx Ajyhm T Sec Tocu

Condition: used, tool clamping area 0 mm weight 0 t Nodpfx Ajd Ihcajc Tscu Titan coated carbide rough milling and finish milling cutter with following diameters and different quantities available: Ø 9,7 - 11,7 - 13,7 - 15,7 - 17,7 - 19,7 - 20,5 - 21 mm cutter up to incl. 15 mm 15€/pc. from 15 mm up 20€/pc.!

Condition: good (used), Year of construction: 2017, functionality: fully functional, We are selling 2 x Aqua Medic Titan Professional Flow Cooler 6000 in good condition. The Aqua Medic flow coolers of the Titan Professional series are designed for extremely large and industrial aquariums and cool the seawater circuit with very high performance. These heat exchangers are made of high-quality titanium, they are seawater-proof, corrosion-resistant and contamination-free, which makes the coolers particularly robust. In addition, the titanium flow coolers are very powerful and can also be operated very simply using the temperature controller. Nodjxykp Tjpfx Ac Tecu Price is €2500 per unit.

Condition: new, Year of construction: 2026, Sheet metal folder directly from polish manufacturer Prod-Masz. Plate Bending Machine ZGR-2000T/0,8 incl. wheels Technical data: Maximum working length: 2140 mm max. sheet metal thickness: 0,8 mm (steel) Titan-Zinc-Plate 0,8 mm, Aluminium Plate 1,2 mm Cooper plate 1,2 mm Max. bending angle: 145 degrees cutting with rotary shears on the whole working length max. bending edge: 15 mm Protractor, tapping angle Nsdpfoc Rtv Tjx Ac Tecu Weight: 180 kg Rotary shears (max. plate gauge to 0,8 mm / steel) + 350 Euro The machine have certificate CE and 12 months of warranty Shipping costs: its dependent on destination point ONLY SHIPPING IS POSSIBLE Price: 1.350,00 Euro ( VAT excl. ) We provide invoices with 0% of tax.

Condition: like new (used), functionality: fully functional, mileage: 350 km, power: 129 kW (175.39 HP), first registration: 01/2026, fuel type: diesel, empty load weight: 3,480 kg, maximum load weight: 3,200 kg, overall weight: 7,490 kg, tire size: 205/70R17,5, tire condition: 100 %, axle configuration: 4x2, wheelbase: 3,400 mm, next inspection (TÜV): 02/2026, fuel: diesel, fuel tank capacity: 100 l, brakes: engine braking, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 5, emission class: euro6, suspension: steel, number of seats: 3, total length: 5,600 mm, loading space length: 3,500 mm, loading space width: 2,000 mm, loading space height: 500 mm, Year of construction: 2025, Equipment: ABS, AdBlue, Android Auto, Apple CarPlay, Bluetooth, EBS, USB port, air conditioning, airbag, central locking, differential lock, electronic stability program (ESP), fog lights, lane keeping assist, navigation system, onboard computer, power assisted steering, soot filter, start-stop system, tachograph, traction control, trailer coupling, FUSO Canter 7C18 Hyva Hooklift Payload depending on container approx. 3.3 t 3,500 kg towing capacity Chassis warranty: 3 years or up to 100,000 km from first registration Driver’s comfort suspension seat, horizontal suspension (standard) Fuel tank 100 L (standard) Traction tyres on rear axle (standard) Lane departure warning system (standard) Central locking with 2 remote controls (standard) Overhead storage above windscreen (standard) Lockable glove compartment (standard) Immobilizer with transponder (standard) Storage behind the seat (standard) Driver’s seat armrest (standard) Fog lights, halogen (standard) Instrument lighting, continuously adjustable (standard) Daytime running lights, automatic (standard) Rear axle stabilizer (standard) Digital tachograph (standard, without tachograph calibration) ABS with electronic brake-force distribution (standard) Spare wheel / spare rim (standard) Electric windows (standard) Electronic stability program (standard) Emergency brake assist (AEBS), Lane departure warning system (LDWS), LED headlamps (LH9), Reversing warning system, Light sensor, Driver’s airbag (SA5) (standard) Limited-slip differential (A86) Body mounting provisions (CR8) Front license plate holder (C60) Rear underrun protection bar (CU9) Batteries, 2 x 12V 100 Ah, maintenance-free (EE9) 7" touchscreen radio/audio system incl. Apple CarPlay (standard) Rear-view camera (standard) 12V trailer socket, 13-pin (EX5) Heated rear-view mirrors (F62) Medium mirror bracket incl. wide-angle mirror (FM9) Frame cover behind cab (GU8) Automatic climate control (H07) Reversing warning system (JW0) Exhaust system cover (KA6) PTO (200Nm, 31kW) operated via vacuum pump, for direct-mount hydraulic pump (NQ7) Engine specification: Euro VI OBD Step E (OM5) Dual battery cover (OT6) AdBlue tank cover (OU3) Full traction tyres, rear axle (RM5) Hand throttle for engine speed (VA6) Mounting and installation for hand throttle (VB1) Canter safety package incl. rubber floor mats (YT7) Valve extensions (YT8) (€48,000) FACTORY GU by HYVA, Hooklift 05-32-K TITAN with toolbox incl. container Universal base frame made of high-strength steel for connecting the hooklift to the chassis, simultaneously serving as a mounting frame for cylinder bearings, hooklift frame locking, pivot shaft mount of the tipping frame, and container support. Tipping frame with separate tipping and roll bearings and automatic mechanical locking Kinked hook arm made of high-strength steel with maintenance-free guide Hydraulic system with double-acting cylinders, control valve with overpressure and secondary safety Cabin operation Mechanical container locking hooks HD tank Painted in RAL 9005 DIN locking Hook height 900 mm (standard for city roll-off containers) Subframe extension 800 mm for up to 5 t unit for toolbox Remote electric control for each hydraulic section Mudguard holder LED work lights Holder for broom and shovel Toolbox between cab and hooklift: 1850 x 800 x 300 mm Payload incl. container approx. 3,200 kg Ncjdpfx Asyg Nylec Teu Roll-off container 3,500 x 2,000 x 500 mm (internal clearance) (€26,000 + VAT)

Condition: new, mileage: 420 km, power: 375 kW (509.86 HP), axle configuration: 6x2, color: green, driver cabin: day cab, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, = Further options and accessories = - Brake system = Notes = Arocs 2751 6x2 HAD - pre-equipped for forestry crane operation!! Front axle 9.0 t, Hydraulic Auxiliary Drive (HAD), rear axle 13.4 t, steering and liftable trailing axle 8.0 t, electronic brake system with ABS and ASR, retarder, two-line trailer brake, wheelbase 4,800 mm, stabilizer on front axle, extendable rear underrun protection, front underrun protection, compressed air connection in cab, air-suspended driver’s comfort swing seat, functional passenger seat, air conditioning, transparent external sun visor, comfort steel-spring cab suspension, M-Cab ClassicSpace, reinforced end cross member, interactive multimedia cockpit, navigation system, LED fog lights, construction rear lights, 2 low LED revolving beacons, body: Hyva-Lift roll-off tipper 20-60 Titan, hook height: 1,570 mm, container length: 4,500 mm to 7,000 mm, lifting force: 200 kN, container with crane platform, capacity: approx. 30 cbm, container length 7,000 mm, recessed hook, foldable protection roof 2,000 mm with hand pump, crane: Epsilon Q150L, crane cabin available on request, length: 9.7 m Application area: Processing and transport of cut material. We will be happy to provide you with a leasing or financing offer from Mercedes-Benz Bank on request. Mr. Ebert and Mr. Seidel (Tel. ...) will be pleased to assist you. For further information, please visit our homepage. !Subject to changes, errors, and prior sale! ESP, navigation system Cabin: Local traffic = Further information = Njdpfx Aceyfqvfe Tscu Engine displacement: 12,809 cc Please contact Tobias Ebert for further information.

Condition: new, Year of construction: 2025, ZGR-2140/0,8 with transport wheels Technical data: Maximum working length: 2140 mm max. sheet metal thickness: 0,8 mm (steel) Titan-Zinc-Plate 0,8 mm, Aluminium Plate 1,5 mm Cooper plate 1,25 mm Max. bending angle: 145 degrees cutting with rotary shears on the whole working length max. bending edge: 15 mm Protractor, tapping angle Weight: 180 kg Rotary shears (max. plate gauge to 0,8 mm / steel) + 350 Euro The machine have certificate CE and 12 months of warranty Nodockm Hmspfx Ac Tocu The price excludes Vat – it applies only to registered companies with an European Vat Id. In order to receive 0% Vat price, you must send us full company details (full name address with postcode and a Valid European Vat ID)

Condition: new, Year of construction: 2025, Technical data: - Maximum working width: 3140 mm Ncjdpfxsc N Af De Ac Tou - Sheet gauge up to: 1,0 mm (Steel) - Titan-Zinc-Plate 1,0 mm, Aluminium Plate 1,8 mm Cooper plate 1,5 mm - Max. bending angle: 145 degrees - Rotary shears cut to full working length - Thickness of bending bar: 20 mm - Protractor - Weight: 600 kg - The machine have certificate CE and 12 months warranty.

Condition: new, Year of construction: 2025, ZGR-3140/1,0 Our products are best quality and have certificate CE. Plate Bending Machine ZGR-3140\1,0 + additional equipment Ncodscntnkepfx Ac Tou Technical data: - Maximum working width: 3140 mm - Sheet gauge up to: 1,0 mm (Steel) - Titan-Zinc-Plate 1,0 mm, Aluminium Plate 1,8 mm Cooper plate 1,5 mm - Max. bending angle: 145 degrees - Rotary shears cut to full working length - Thickness of bending bar: 20 mm - Protractor - Weight: 600 kg - Rotary shears (max. plate gauge 0,8 mm / Steel) + 350 Euro - The machine have certificate CE and 12 months warranty.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: JEWELliner "XS" PRO Modell "Premium", type of input current: AC, laser power: 30 W, total width: 400 mm, total height: 500 mm, total length: 600 mm, overall weight: 55 kg, warranty duration: 12 months, height adjustment type: electric, door opening width: 400 mm, door opening height: 200 mm, laser wavelength: 1,064 nm, Developed, produced and checked in Germany. JEWELliner "XS-PRO" model series "Premium" with 30W CW laser power include camera - electric lift door - auto-focus - compact machine dimension Ncodpjppxmksfx Ac Tsu - Developed and produced in Germany - Other models, laser power and options on request. Engraving Laser (fiber technology) with security housing „LASER CLASS 1“. Compact designed, all components are in the housing and will be air cooled. Maintenance free! Materials: metals, ceramic and some plastics. Applications can found in the jewellery ans also in other production areas. machine dimension: L60xW40H50cm, to integrade simple into a production area. Samples of material: steel, stainless steel, gold, silver, titan, aluminium, brass, copper, brounce, carbon, ceramic, makrolon Possibilities of application: - graphic engraving (logo, draw, handdraws, signatures) - serial numbers - barcode, datamatrix, QR-code - ring inside (f.e. name, date, symbol, handwrite) optional - ring outside (f.e. name, endless graphic, endless pattern) optional - bangles inside/outside - optional - text (text straight, circled text, bowed text, text symbols) - handwrite - finger print - photo engraving (photos, pictures) - micro engraving (micro text till 0.25mm character high) - round engraving (engraving on round or bowed surfaces) optional main parts of JEWELliner "XS" PRO Modell "Premium" : - fiber laser unit with scan head and focus pointer - security housing „Laser Class 1“ with 200x140mm security glass - manual door opening - emergency button - 180° view area to the marking field - electrical z-axis for focus positioning - rotary axis with removable jewelry jaw chuck - configured engraving software - high resolution industrial camera USB 3.1 Specification: - laser technology: fiber laser - outputpower CW: 30W - available frequency: 1.8 - 2000kHz - connection type data: USB 2.0 - wave length: 1064nm - lens (delivery): F-Theta 163 - marking field size: 110 x 110 mm – smaller possible - focus range: ca. 1.7 mm - min character high: 0.25 mm - min. line width: 0.023 mm - cooling: air cooled - maintenance: no service necessary - power: AC 110V / 240V – 50/60Hz – short cut save - dimension: L600 x W400 x H500 mm - weight: 55kg The engraving laser is after the delivery immediately ready to use. In this way, the machine can be integrated in the production very fast. The machines can be inspected and tested by appointment. Pictures can be different!

Condition: new, Year of construction: 2024, machine/vehicle number: BN20XS "Standard", shaft length: 1,064 mm, workpiece weight (max.): 5 kg, input voltage: 230 V, type of input current: AC, laser power: 20 W, type of cooling: air, total width: 400 mm, total height: 500 mm, total length: 600 mm, working range: 70 mm, overall weight: 30 kg, warranty duration: 12 months, height adjustment type: electric, sheet thickness aluminum (max.): 3 mm, door opening width: 400 mm, door opening height: 350 mm, travel distance Z-axis: 100 mm, JEWELliner "XS2" model series "Standard" with 20W CW laser power. - Developed and produced in Germany - Other models, laser power and options on request. Engraving Laser (fiber technology) with security housing „LASER CLASS 1“. Compact designed, all components are in the housing and will be air cooled. Maintenance free! Materials: metals, ceramic and some plastics. Applications can found in the jewellery ans also in other production areas. machine dimension: L50xW40H50cm, to integrade simple into a production area. Samples of material: steel, stainless steel, gold, silver, titan, aluminium, brass, copper, brounce, carbon, ceramic, makrolon Possibilities of application: - graphic engraving (logo, draw, handdraws, signatures) - serial numbers - barcode, datamatrix, QR-code - optional ring inside (f.e. name, date, symbol, handwrite) optional - optional ring outside (f.e. name, endless graphic, endless pattern) optional - optional bangles inside/outside - optional - text (text straight, circled text, bowed text, text symbols) - handwrite - finger print - photo engraving (photos, pictures) Njdpfx Acsppxlmj Tecu - micro engraving (micro text till 0.15mm character high) - round engraving (engraving on round or bowed surfaces) optional main parts of JEWELliner "XS2" ( BN20XS2-HR ) : - fiber laser unit with scan head and focus pointer - security housing „Laser Class 1“ with 100x140mm security glass - manual door opening - emergency button - 180° view area to the marking field - electrical z-axis for focus positioning - configured engraving software - rotation axis Specification: - laser technology: fiber laser - outputpower CW: 20W - connection type data: USB 2.0 - wave length: 1064nm - lens (delivery): F-Theta 163 - marking field size: 70 x 70 mm – smaller possible - focus range: ca. 1.0 mm - min character high: 0.15 mm - min. line width: 0.020 mm - cooling: air cooled - maintenance: no service necessary - power: AC 110V / 240V – 50/60Hz – short cut save - dimension: L500 x W400 x H500 mm - weight: 38kg The engraving laser is after the delivery immediately ready to use. In this way, the machine can be integrated in the production very fast. The machines can be inspected and tested by appointment. Pictures can be different!

Condition: new, Year of construction: 2025, ZGR-2140/1,2 with additional equipment Our products are best quality and have certificate CE. Plate Bending Machine ZGR-2140\1,2 Technical data: - Maximum working width: 2140 mm - Sheet gauge up to: 1,2 mm (Steel) - Titan-Zinc-Plate 1,2 mm, Aluminium Plate 2,0 mm Cooper plate 1,7 mm Ncedjcntlljpfx Ac Tju - Max. bending angle: 145 degrees - Rotary shears cut to full working length - Thickness of bending bar: 20 mm - Protractor - Weight: 290 kg - Rotary shears (max. plate gauge 0,8 mm / Steel) + 350 Euro - The machine have certificate CE and 12 months warranty. Shipping costs: its dependent on destination point, please ask us, we check Your total shipping costs.

Condition: excellent (used), functionality: fully functional, GEA / Stork / Koppens Forming, Breading, and Frying Line Manufacturer: GEA / Stork / Koppens Line type: forming, breading, and frying of food products The line consists of the following equipment: 1. Meat Bin (stainless steel) Capacity: 200 l 2. 200 l Bin Lifter Manufacturer: CFS Type: LFT (R) Machine number: 1642 Power supply: 400 V, 3-phase, 50 Hz Power: 0.55 kW Current consumption: 1.8 A Weight: 310 kg Lifting height: up to 2200 mm (adjustable) Dimensions: 1200 × 1300 × 3000 mm 3. Former Manufacturer: GEA Food Solutions Bakel B.V. Model: MultiFormer 400 Machine number: E022110205415 Year of production: 2021 Power supply: 380–415 V, 3-phase, 50 Hz Power: 8 kW Current consumption: 15.4 A Belt: stainless steel wire mesh Ncjdpsx H T Egefx Ac Tsu Belt width: 400 mm Machine dimensions: 3100 × 1000 × 2700 mm Additional forming accessories: - 2 pallets of forming plates - Stainless steel rack with 2 additional discharge belts (belt width: 400 mm) - Rack dimensions: 1350 × 600 × 2100 mm - GEA tool trolley - Trolley dimensions: 1200 × 700 × 950 mm 4. Breading Machine/Breader Manufacturer: Stork Titan B.V. Model: RotoCrumb TRC 630 TD 2112 Type: 4780626AA Serial number: 10061097 Year of production: 2007 Belt: stainless steel wire mesh Belt width: 630 mm Dimensions: 3600 × 1600 × 2100 mm 5. Stainless steel platform for IBC tanks Working height: 1800 mm Dimensions: 1200 × 1500 × 2800 mm 6. Fryer Manufacturer: Koppens Machinefabriek B.V. Type: BR 3000 / 600 Machine number: 1316 Year of production: 2000 Power supply: 400 V, 3-phase, 50 Hz Power: 1.5 kW Current consumption: 4.6 A Weight: 2450 kg Belt: stainless steel wire mesh Belt width: 600 mm Frying length: 3000 mm Heating system: thermal oil Manual hoists Fryer dimensions: 5400 × 1600 × 3200 mm Fryer accessories: - Valve station – 2200 × 600 × 2600 mm - Thermal oil station with pump – 1300 × 800 × 2700 mm - Stainless steel cabinet with 2 Ansul fire extinguishers – 600 × 210 × 750 mm 7. Oil Tank (stainless steel) Manufacturer: Koppens Machinefabriek B.V. Diameter: 1100 mm Height: 3200 mm 8. Belt Conveyor with Covers Manufacturer: Koppens Machinefabriek B.V. Model: NGT 5000/600 Serial number: 12 Power supply: 380 V, 3-phase, 50 Hz Belt width: 600 mm Dimensions: 6900 × 900 × 1150 mm 9. De-elevating Belt Stainless steel wire mesh belt Belt width: 330 mm Adjustable height Dimensions: 2000 × 800 × 850 mm Complete GEA / Stork / Koppens line is intended for industrial production of formed, breaded, and fried food products such as nuggets, burgers, patties, and convenience foods. The line enables a continuous and automated processing workflow — from raw material loading, through precise forming and even breading, right up to controlled frying with thermal oil. The set is characterised by high performance, robust stainless steel construction, and the potential for integration with other production line elements.

Condition: new, Year of construction: 2025, Sheet metal folder directly from polish manufacturer Prod-Masz. Plate Bending Machine ZGR-2000,8 incl. rotary slitters Technical data: Maximum working length: 2140 mm max. sheet metal thickness: 0,8 mm (steel) Njdectui Rspfx Ac Tscu Titan-Zinc-Plate 0,8 mm, Aluminium Plate 1,2 mm Cooper plate 1,2 mm Max. bending angle: 145 degrees cutting with rotary shears on the whole working length max. bending edge: 15 mm Protractor, tapping angle Weight: 180 kg Rotary shears (max. plate gauge to 0,8 mm / steel) The machine have certificate CE and 12 months of warranty Shipping costs: its dependent on destination point ONLY SHIPPING IS POSSIBLE Price: 1.400,00 Euro ( VAT excl. ) We provide invoices with 0% of tax. Payment in cash or by bank transfer in advance.

Condition: new, Year of construction: 2025, ZGR-2140/0,8 Our products are of the best quality and have Certificate CE. Plate Bending Machine ZGR-2000\0,8 Technical data: Ncsdpfxscntk Rj Ac Tsu Maximum working length: 2140 mm max. sheet metal thickness: 0,8 mm (steel) Titan-Zinc-Plate 0,8 mm, Aluminium Plate 1,5 mm Cooper plate 1,25 mm Max. bending angle: 145 degrees cutting with rotary shears on the whole working length max. bending edge: 15 mm Protractor, tapping angle Weight: 180 kg Rotary shears (max. plate gauge to 0,8 mm / steel) + 350 Euro The machine have certificate CE and 12 months of warranty Price: 1.050,00 Euro ( VAT excl. )

Condition: new, Year of construction: 2025, Sheet metal folder directly from polish manufacturer Prod-Masz. Plate Bending Machine ZGR-3000,8 Technical data: - Maximum working width: 3140 mm - Sheet gauge up to: 0,8 mm (Steel) - Titan-Zinc-Plate 0,8 mm, Aluminium Plate 1,2 mm Cooper plate 1,2 mm - Max. bending angle: 145 degrees - Rotary shears cut to full working length - Thickness of bending bar: 24 mm - Protractor - Weight: 400 kg Nsdpfxec N Aips Ac Tocu - Rotary shears (max. plate gauge 0,8 mm / Steel) + 350 Euro - The machine have certificate CE and 12 months warranty. Price: 2050 Euro Shipping costs: its dependent on destination point ONLY SHIPPING IS POSSIBLE We provide invoices with 0% of tax. Payment in cash or by bank transfer in advance.

Condition: new, Year of construction: 2025, Sheet metal folder directly from polish manufacturer Prod-Masz. Plate Bending Machine ZGR-3000,8 Technical data: - Maximum working width: 3140 mm - Sheet gauge up to: 0,8 mm (Steel) - Titan-Zinc-Plate 0,8 mm, Aluminium Plate 1,2 mm Cooper plate 1,2 mm - Max. bending angle: 145 degrees - Rotary shears cut to full working length - Thickness of bending bar: 24 mm - Protractor - Weight: 400 kg - Rotary shears (max. plate gauge 0,8 mm / Steel) + 350 Euro - The machine have certificate CE and 12 months warranty. Price: 2050 Euro Shipping costs: its dependent on destination point ONLY SHIPPING IS POSSIBLE Ncodpfx Acscl Ixqj Teu We provide invoices with 0% of tax. Payment in cash or by bank transfer in advance.

Year of construction: 2021, operating hours: 480 h, condition: like new (used), functionality: fully functional, Electrostatic separator (corona) - EBS-4-271200 - builded to extract the metals from the rejection of the plastic from electric cable process Including additional options: - 3 screw transporters; - 3 m3 input hopper; - mechanisms for changing material flow and stand for big bag for mix collection; Nsdpfxewcp I Ao Ac Tocu - touch screen for control cabinet english / rusian language; - set of spare parts Designed for dry high-efficiency separation of materials, that are differ in their electric properties: - mixtures of plastics and metals, including shredded cables, into metal (copper, aluminium), and non-conducting material (plastic); - mixture of different materials, provided that one of the components has conducting properties (extraction oftextilecord from rubber crumb in the processing of used tires ); - shredded WEEE (including PCB’s) into metal (aluminium, copper, nickel, bronze, and other) and nonconducting materials (plastic, textolite, fiber-glass plastic, and other), and also for: - separations of non-metal raw material (feldspar, pegmatite, quartz sand); - enrichingofdroughconcentratesofores of rare metals (titan-zirconia, tantalum- niobic, tin-tungsten, monazite), ores of precious metals (gold, silver); - benefication of diamond ore. The equipment was purchased at the end of 2021 directly from the prestigious manufacturer PRODECOLOGIA, which also installed it in our factory. The equipment works perfectly and can be tested at any time with PVC plastic, from our Guidetti plant for electric cable recycling. Upon request, we can also provide installation + commissioning at the buyer's location. PRICE : 108 000 EURO- netto