Used Tonelli Universal 2000 for sale (10,648)

Condition: ready for operation (used), Year of construction: 1997, A boiler system with underfeed firing is available. Heating capacity: approx. 2300kW. An on-site inspection is possible. Hodpsxwcuvsfx Ab Ast

Condition: ready for operation (used), Year of construction: 1992, A dismantled Autefa compensating stacker is available. Working width: 3000mm, working speed: 60m/min. On-site inspection is possible. Hsdpfxowwvw Ts Ab Ajt

Condition: used, Year of construction: 2003, x-travel 780 mm y-travel 560 mm z-travel 560 mm tool taper SK40 control HEIDENHAIN iTNC 530 weight of the machine ca. ca.12,5 t required space 3,40 x 3,30 x 2,60 m DECKEL MAHO DMC 60T BJ 2003 Operating hours: 32532.7 The machine DMC 60T (1659) is in very good condition and is ideally suited for precise milling operations thanks to powerful motor spindles, high feed rates, and a flexible tool magazine. All technical details can be found below. Working range Travel distance/ X-axis: 780mm Y-axis: 560mm Z-axis: 560mm Worktables NC rotary table – clamping surface, pallet: diameter 500 x 630 mm Centering bore: diameter 50^H6 20 deep mm Locating bore: diameter 20^H6 20 deep mm Torque of the table at: – 100% duty cycle: 1603Nm – 25% duty cycle: 2813Nm Max. rotation of the table: 30 rpm Feed: 7200 ./min. Permissible table load: 400 kg Tool magazine with magazine SK 40 Hodpfxjwm Rrwo Ab Ajt Feed drive AC servo motors in digital technology for axis X, Y, Z Feed speed X-, Y-, Z-axis infinitely programmable: 20–15000 mm/min. Rapid traverse X-, Y-, Z-axis: 50 mm/min. Setup operation X-, Y-, Z-axis: 20–2000 mm/min Measuring system Resolution | X-, Y-, Z-axis: 0.001mm Input unit | X-, Y-, Z-axis: 0.001mm Position tolerance | X-, Y-, Z-axis: 0.010mm Working area Travel/ X-axis: 780mm Y-axis: 560mm Z-axis: 560mm Spindle main speed: 18000min^-1 Speed Infinitely programmable: 20–24000 min^-1 In setup mode: 20–800 min^-1 Main drive 24000 min^-1: motor spindle without gearbox Speed Infinitely programmable: 20–24000 min^-1 In setup mode: 20–800 min^-1 Weight Machine with tool changer and transport base: approx. 10100kg Installation weight Machine with fixed table and tool changer: max. 11500kg Dimensions Machine: 3.40 x 3.30 x 2.60 m Chip conveyor: 2.77 x 1.00 x 2.07 m Band filter system 900l: 2.22 x 1.40 x 2.20 m

Condition: new, Year of construction: 2026, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 740 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 36 m/min, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 40 kVA, torque: 154 Nm, controller manufacturer: Heidenhain, controller model: 640, table load: 1,500 kg, rotary table diameter: 700 mm, rotational speed (max.): 800 rpm, overall weight: 12,000 kg, spindle speed (max.): 17,000 rpm, coolant supply: 40 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, MILLING/TURNING CENTER, HSK 63T, Heidenhain, 90 tools Swivel Milling Head: - With torque motor and hydraulic clamping - Swivel range +30/-120°, infinitely variable Hsdpfx Ajylnq Tjb Ajt - 17,000 rpm - 154 Nm torque - Drive power 29 kW - Separate spindle cooling for consistent temperature - Tool holder HSK-T63 with air blast function Integrated Rotary Table: - With torque motor and hydraulic clamping - Speed 800 rpm - Diameter 700 mm - Extended clamping surface 1,600 x 700 mm General Features: - Heidenhain glass scales on all 5 axes - 90-position tool changer with double-arm gripper - Coolant and compressed air pistol - Chip conveyor - Coolant system - Electronic handwheel - Work area lighting - Ergonomic control console

Condition: new, table length 4000 mm table width 2000 mm table height 200 mm weight 2400 kg Manufacturer: GERD WOLFF Technical Details: • Length 4000 mm • Width 2000 mm • Height 200 mm • Weight 2400 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 8 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded Hodpeymf H Usfx Ab Ajt seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 • 2400 x 1200 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table

Condition: new, plate depth 2000 mm plate width 1500 mm plate height 300 mm weight 2385 kg dimensions of the machine ca. 2000 x 1500 x 300 mm GERD WOLFF clamping plate 2000 x 1500 x 300 mm If you cannot find the size you need, you can also send us an e-mail with the completed PDF form (attached). This way we can manufacture a clamping plate for you according to your requirements. T-slot size: 48 x 28 T-slot spacing: 300 Number of slots: 5 Edge distance: 150 Weight: 2385 kg Casting quality HT250 Hsdpfsyk Ih Nsx Ab Ast Flatness less than 0.12 mm Surface machined according to DIN 876/II

Condition: new, plate width 3000 mm plate depth 2000 mm plate height 300 mm weight 4600 kg GERD WOLFF clamping plate 3000 x 2000 x 300 mm If you cannot find the size you need, you can also send us an e-mail with the completed PDF form (attached). This way, we can manufacture a clamping plate according to your requirements. T-slot size: 52 x 28 Hodpfx Ajyk Ikksb Ast T-slot spacing: 300 Number of slots: 6 Edge distance: 100 Weight: 4600 kg Casting quality HT250 Flatness less than 0.12 mm Surface treatment according to DIN 876 / III

Condition: new, plate width 2000 mm plate depth 2000 mm plate height 300 mm weight 3250 kg dimensions of the machine ca. 2000 x 2000 x 300 mm Clamping plate 2000 x 2000 x 300 mm If you have not found the size you want, you can also send us an e-mail with the completed PDF form. With this, we can have a plate made for you individually. Hodsyk Imlspfx Ab Ajt Number of grooves: 7 Edge distance: 100 mm Groove distance: 300 mm Groove size: 28 x 52 mm Casting quality HT250 Weight: 3250 kg Flatness less than 0.12 mm. Surface machined according to DIN 876/III

Condition: like new (used), functionality: fully functional, machine/vehicle number: NM0KCXTP6KSU99707, mileage: 9,675 km, power: 367.75 kW (500.00 HP), first registration: 10/2025, fuel type: diesel, empty load weight: 8,573 kg, maximum load weight: 9,427 kg, overall weight: 18,000 kg, tire size: V: 315/70 R22.5 - A: 315/50 R22.5, tire condition: 100 %, wheelbase: 3,600 mm, next inspection (TÜV): 11/2026, fuel: diesel, brakes: intarder, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 16, emission class: euro6, number of beds: 2, total length: 3,600 mm, total width: 2,540 mm, total height: 3,916 mm, Year of construction: 2025, operating hours: 164 h, Equipment: ABS, AdBlue, Bluetooth, EBS, USB port, additional headlights, air conditioning, airbag, blind spot assist, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, fridge, full service history, hill-start assist, lane keeping assist, navigation system, onboard computer, parking air conditioner, parking heater, power mirror, retarder, seat heater, second fuel tank, soot filter, spoiler, start-stop system, tachograph, tire pressure monitoring, traction control, trailer coupling, We offer a rental scheme with a minimum term of 36 months, ensuring long-term stability and continuity. The monthly rental price is €2,000 excluding VAT, providing a transparent and straightforward cost structure. - An upfront payment of €5,000 is required at the start. This gives both parties the necessary security and establishes a solid foundation for smooth cooperation. - Hjdpfxeym A S Us Ab Ajt In addition, a maintenance contract is included, so you do not have to worry about service or additional costs. You benefit from a worry-free and professional solution, with quality and reliability as key priorities.

Condition: used, Year of construction: 2008, Technical details: standard turning dia.: 200 turning length: max. 810 mm control: MSX-701 MAPPS III greates pass round over bed: 800 mm Max. distance between centres: 1130 mm max. turning diameter: 320 mm max. workpiecediameter: 300 mm bar material dia.: 65 mm Traverse X-Axis 1: 210 Traverse X-Axis 2: 210 mm Traverse X-Axis 3: 210 mm Traverse Y-Axis 1: 110 (+65/-45) mm Traverse Y-Axis 2: 110 (+45,/-65) mm Traverse Z-Axis 1: 300 mm Traverse Z-Axis 3: 300 mm Traverse Z-Axis 2: 810 mm Traverse B-Axis: 870 mm turning speed range - spindle: 5.000 1/min Number of spindle speed ranges: 2 . spindle nose: JIS A2-6 spindle bore: 73 mm Hjdpfxozd Su Ee Ab Aet spindle bearing diameter: 120 mm C-Axis: 0,001 ° turning speed range - spindle: 5.000 1/min spindle nose: JIS A2-6 spindle bore: 73 mm bar material dia. max: 65/52 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° Number of Turrets: 3 . Number of tool stations: 16 x 3=48 pos Schank height for square tool: 20 mm Diameter of boring bar: 32 mm turret changing time (4-stations): 0,18 sec Number of driven tools: 16 x 3=48 pos max. spindle speed driven tools: 6.000 U/min. Rotary tool machining ability: M16 / Ø16 . rapid traverse X-axis: 30 m/min rapid traverse Y-axis: 20 m/min rapid traverse Z-axis: 50 m/min drive capacity - spindle motor: 25 / 22 kW power capacity - driven tools: 7,5 / 5,5 kW total power requirement: 92,7 kVA weight of the machine ca.: 9,4 t dimensions of the machine ca.: 4,0 x 2,8 x 2,4 m Accerories Chip conveyor Coolantsystem C-axis in main and sub spindle Y-axis 2 x part counter total counter tool setting Overhead partsgripper with conveyor belt. Spindle 1 Chuck SMW KNCS-N 210 / 52 mm Spindle 2 Collet Chuck Hainbuch Spanntop nova Kombi Axfix 65 Robot interface Lehmann Robot with parts belt for feeding and disposal CNC Turning- and Milling Center MORI SEIKI NZ 2000 T3Y2 The NZ2000 T3Y has 2 spindles and 3 turrets, and 2 turrets have the Y-axis function and built-in milling motors. This not only allows synchronized machining using 3 turrets, but also achieves heavy-duty cutting and high-speed machining using rotary tools thanks to the built-in motor turrets. For shaft parts loading and unloading there is a Lehmann Robot with conveyor belts for loading and unloading. The machine can also be sold without robot. *

Condition: used, functionality: fully functional, mileage: 87,500 km, power: 162 kW (220.26 HP), first registration: 05/1998, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: red, gearing type: mechanical, number of seats: 9, Year of construction: 1998, Equipment: additional headlights, The LHF 16 fire engine was in service at a major airport. Hodpfx Aey S Thfsb Aet The condition is good and it is ready for operation. The equipment shown in the photos belongs to the vehicle and will be included. Water tank: 1230 liters Foam tank: 130 liters

Condition: like new (used), functionality: fully functional, load capacity: 2,000 kg, Equipment: foot remote control, Demmeler Ergonomix M-2000 Perforated Plate, original 1.0m, diagonal 1.1m, 28mm holes Hodoy Hl N Djpfx Ab Ajt Almost unused, like new, top condition Thanks to the ingenious arrangement of the entire mechanism, the developers at Demmeler have succeeded in creating an unbeatable large working area while maintaining a compact footprint for the Demmeler Ergonomix®M manipulator. The manipulator always brings maximum loads into the ideal position. A special feature of the Demmeler Ergonomix®M product family is the wide swivel range of up to 180°. This provides a decisive advantage for many workpieces, allowing them to be fully machined in one clamping setup without the need for additional repositioning. Payload 2000 kg Model M2000 A = min 490 mm B = max 970 mm C = max 1480 mm D = max 1000 mm Torque 1250 Nm Tilt Angle 180° Tilting Moment 8000 Nm

Condition: used, mileage: 74,053 km, power: 375 kW (509.86 HP), first registration: 11/2015, overall weight: 35,000 kg, fuel type: diesel, color: white, axle configuration: 8x2, maximum load weight: 11,625 kg, empty load weight: 23,375 kg, tire size: 385/55/315/70 R 22,5, next inspection (TÜV): 11/2026, wheelbase: 4,500 mm, brakes: engine braking, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space volume: 16 m³, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, fog lights, low noise, power assisted steering, seat heater, Vehicle location: Bovenden, with house, 1 comfort seat, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, Telligent gearshift, ABS (anti-lock braking system), traction control (ASR), constant throttle, auxiliary drive, lift and lower function, differential lock, work lights, rotating beacon, storage compartment, leaf-air suspension, connections for air and light for trailer hitch, last axle hydraulically steered, sunroof, remote control, green environmental badge. Wheelbase: 4500 mm, Body: Wiedemann Super 2000 body, Capacity (sludge), 6,000 l (service water), 16,000 l (total), with water recovery, radio remote control 9t/7.5 tons front axles, disc brakes on front and rear axles, vacuum pump type: KW 4000, renewed in 2023 (1801), Aerokill system, hydraulic winch (350 kg) & rescue eye, meter counter for hose lengths, reversing camera, access ladder, filterless water treatment (sedimentation/centrifugal principle), stainless steel water tank (V2A, multi-chamber system) and an integrated fresh water system (approx. 800 - 1,000 l), high-pressure pump: Uraca P4-45-70, (1.025), large HD hose reel: approx. 180 m high-pressure hose DN38, a small HD hose reel: approx. 70 m high-pressure hose DN13, and a DUO coupling for power reduction, external transfer pump (rotary lobe pump Jurop VL14) for work with large water volumes. Pump output: 1,400 l/min, 2 bar, 7 kW, wardrobe with heater, hand washing basin (hot/cold). ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Hjdozbvdaspfx Ab Aet

Condition: used, Year of construction: 2011, Technical details: standard turning dia.: 200 turning length: max. 810 mm control: MSX-701 MAPPS IV greates pass round over bed: 800 mm Max. distance between centres: 1130 mm max. turning diameter: 320 mm max. workpiecediameter: 300 mm bar material dia.: 65 mm Traverse X-Axis 1: 210 Traverse X-Axis 2: 210 mm Traverse X-Axis 3: 210 mm Traverse Y-Axis 1: 110 (+65/-45) mm Traverse Y-Axis 2: 110 (+45,/-65) mm Traverse Z-Axis 1: 300 mm Traverse Z-Axis 3: 300 mm Traverse Z-Axis 2: 810 mm Traverse B-Axis: 870 mm turning speed range - spindle: 5.000 1/min Number of spindle speed ranges: 2 . spindle nose: JIS A2-6 spindle bore: 73 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° turning speed range - spindle: 5.000 1/min spindle nose: JIS A2-6 spindle bore: 73 mm bar material dia. max: 65/52 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° Number of Turrets: 3 . Number of tool stations: 16 x 3=48 pos Schank height for square tool: 20 mm Diameter of boring bar: 32 mm turret changing time (4-stations): 0,18 sec Number of driven tools: 16 x 3=48 pos max. spindle speed driven tools: 6.000 U/min. Rotary tool machining ability: M16 / Ø16 . rapid traverse X-axis: 30 m/min rapid traverse Y-axis: 20 m/min rapid traverse Z-axis: 50 m/min drive capacity - spindle motor: 25 / 22 kW power capacity - driven tools: 7,5 / 5,5 kW total power requirement: 92,7 kVA weight of the machine ca.: 9,4 t dimensions of the machine ca.: 4,0 x 2,8 x 2,4 m Accerories Chip conveyor Coolantsystem C-axis in main and sub spindle part counter total counter tool setting Overhead partsgripper with conveyor belt. Spindle 1 Chuck SMW KNCS-N 210 / 52 mm Spindle 2 Collet Chuck Hainbuch Spanntop nova Kombi Axfix 65 Robot interface Hodpozk U Rpofx Ab Ast CNC Turning- and Milling Center MORI SEIKI NZ 2000 T3Y2 The NZ2000 T3Y has 2 spindles and 3 turrets, and 2 turrets have the Y-axis function and built-in milling motors. This not only allows synchronized machining using 3 turrets, but also achieves heavy-duty cutting and high-speed machining using rotary tools thanks to the built-in motor turrets. The robot cell has been diemanteled, it is now a stand alone machine. A bar feeder can be added. *

Condition: used, Year of construction: 2021, operating hours: 5,048 h, functionality: fully functional, machine/vehicle number: 245467, ENGEL DUO 17060/2000 injection moulding machine with ENGEL Viper 60 robot (robot working area, conveyor belt) – year 2021 For sale: ENGEL DUO 17060/2000 injection moulding machine, year of manufacture 2021, in excellent technical condition. The machine has been regularly serviced and operated in stable production conditions. Hedpfx Absycc N Ss Aot Technical data and information: - Manufacturer: ENGEL - Model: DUO 17060/2000 - Clamping force: 2000T - Year of manufacture: 2021 - Operating hours: 5048 h - Type: two-platen injection moulding machine - Condition: very good, fully functional Additional equipment: - ENGEL Viper 60 robot – perfectly matched to the machine, ready for direct integration into a production line, robot working area, conveyor belt. Offer advantages: - Low number of operating hours - Modern, energy-efficient design - High process repeatability and precision - Complete package: injection moulding machine + robot, robot working area, conveyor belt Ready for immediate commissioning

Condition: like new (used), functionality: fully functional, machine/vehicle number: NM0KCTP60XSR94382, mileage: 201 km, power: 368 kW (500.34 HP), first registration: 12/2023, fuel type: diesel, empty load weight: 8,973 kg, maximum load weight: 10,027 kg, overall weight: 19,000 kg, tire size: 315/70 R22.5, axle configuration: 4x2, wheelbase: 3,750 mm, fuel: diesel, CO₂ emissions: 54 g/km, fuel tank capacity: 1,350 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, number of beds: 1, total length: 6,160 mm, total width: 2,540 mm, total height: 3,952 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 12,600 kg, Year of construction: 2025, operating hours: 14 h, Equipment: ABS, AdBlue, Bluetooth, EBS, USB port, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, fridge, full service history, hill-start assist, lane keeping assist, navigation system, onboard computer, parking air conditioner, parking heater, power assisted steering, power mirror, retarder, seat heater, second fuel tank, soot filter, spoiler, tachograph, tire pressure monitoring, traction control, trailer coupling, We offer a rental scheme with a minimum term of 36 months, ensuring long-term stability and continuity. The monthly rental price is €2,000 excluding VAT, providing a transparent and straightforward cost structure. - An upfront payment of €5,000 is required at the start. This gives both parties the necessary security and establishes a solid foundation for smooth cooperation. - Hedpfx Asycgvvsb Ast In addition, a maintenance contract is included, so you do not have to worry about service or additional costs. You benefit from a worry-free and professional solution, with quality and reliability as key priorities.

Condition: used, Year of construction: 1990, x-travel 0600 mm y-travel 500 mm Hodpfx Abjyq Sk Uo Aet z-travel 500 mm table-size 500 mm feed range 2- 10.000 mm/min rapid traverse 10 m/min Tool bore ISO 40 turning speed range 0- 6300 U/min main drive DC 8 kW CNC control Dialog 11 total power requirement 23 KVA weight of the machine ca. 5050 kg dimensions of the machine ca. 3,0x2,5x2,0 m CNC milling machine with Dialog 11 control, housing arround working area, rotary table as a 4th axe and ATC with 40 Positions. Machine has been refurbished by FPS in 2010.

Condition: ready for operation (used), A two stage tea and spice mixer Gebrüder Kerner with renewed control circuitry and wiring is available. Volume: 2000l, Material: steel, Drive power: 3.1kW, Control: Siemens. Without stand and feet. An on site inspection is possible. Hedpfx Abjyttw Io Ajt

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, turning length: 291 mm, turning diameter: 270 mm, Like new condition; has not yet been used in production. Control system: CNC path control SIEMENS SINUMERIK 828 D TECHNICAL DATA Main spindle Turning diameter: 270 mm Turning length: 291 mm Chuck diameter: 210 mm Spindle bore: 76 mm Drive power max.: 10.5/20.0 kW C-axis (resolution): 0.001° Speed range up to: 45-4,500 rpm Turret (tool holder) Number of stations: 12 Of these, driven: 12 Speed of driven tools: 5,000 rpm Tool holder: BMT 45 X-axis: 175 mm Z-axis: 350 mm Hsdpfeyrd Uhjx Ab Ajt Tailstock Tailstock quill diameter: 65 mm Tailstock quill stroke: 80 mm EQUIPMENT/ACCESSORIES  Hollow cylinder for main spindle  C-axis for main spindle  Tailstock  Drive unit for turret  Coolant system  IKZ = internal coolant supply, 10 bar  Chip conveyor  Flush gun  Parts catcher  3-jaw chuck SAMCHULLY MH-208 BVI, max. diameter 210 mm, incl. set of jaws  Documentation

Condition: used, Year of construction: 2000, Empty weight: 22.000 kg Working width: 1500mm Working length: 2160mm Max. thickness: 2mm With Supply-station infeed. Hodpfezrd Iaox Ab Aet - Year: 2000 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 12/50 - Drive system: CNC - Power [kW]: 18.0 - Max. sheet thickness [mm]: 2 - Max. working width [mm]: 1500 - Options: Loading system - Transport weight [kg]: 22000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 2007, The Vecoplan VAZ 2000 M F-T is a robust heavy-duty single-shaft shredder manufactured in 2007 for industrial recycling applications. Suitable for plastics, films, wood, paper, cardboard, EBS/RDF, and commercial waste. Formerly part of a production line for LDPE PCR film bales; the production line was modernized and rebuilt in 2024. Successful tests for processing used pallets and cardboard cores have been carried out. The processing of wood and cardboard cores is technically unproblematic. The machine condition has been documented by Vecoplan, and the required spare parts for recommissioning have already been ordered. The sale is due to an internal department closure and the associated restructuring of operational processes. Rotor length approx. 2,000 mm, hydraulic ram for uniform material feeding, flipper/airspring counter-knife system for high operational reliability, Torque/HiTorc drive for high torque and energy-efficient operation, replaceable reversible cutting inserts, suitable for both pre-shredding and secondary shredding, final particle sizes depending on screen and material approx. 10–250 mm, high throughput capacity, and robust, maintenance-friendly design. Inspection possible by appointment. Hodpfx Abey T Hbbs Aot

Year of construction: 1999, condition: ready for operation (used), A CNC universal bed milling machine Anayak is available. Travel path X/Y/Z: 2000mm/1300mm/1460mm, table dimensions X/Y: 1350mm/1550mm, max. table load: 6000kg, speed: 3000rpm, spindle taper: ISO50, feed rate: 3m/min, rapid traverse: 10m/min, weight: approx. 24000kg, control system: Heidenhain TNC426CB. Documentation available. An on-site inspection is possible. Hedpfey N Ddfox Ab Ajt

Condition: new, plate width 2000 mm plate depth 1500 mm plate height 310 mm weight 2385 kg dimensions of the machine ca. 2000 x 1500 x 300 m Clamping plates - T-slot plates - panel array 2000 x 1500 x 310 mm If you have not found the size you are looking for, you can also send us an e-mail with the completed PDF form. With this we can to have an individually manufactured panel made for you. Number of grooves: 5 edge distance: 135mm groove spacing: 270mm Groove width: 28mm Casting quality HT250 Flatness less than 0.12 mm Hedpjy S Dupsfx Ab Aet Surface machined according to DIN 876/III

Year of construction: 2026, condition: refurbished (used), LINEAR CAGE FORMING TUBE MILL VAI 89.5(6) with universal CTA forming REVAMPED AS NEW Specifications: - Manufacturer: VAI Voest Alpine Industrieanlagenbau - Round tube diameter: 33.7 - 88,9 mm - Square tube: 30x30 - 70x70 mm - Rectangular tube: 40x20 - 100x40 mm - Thickness: 0.8 – 5.0 mm (6.0mm with S235J2) - Speed: 100 m/min Complete line with: - Double expandable mandrel with PEELER OTO AD408 SD - Strip entry line with strip opener, driven pinch-roll, pre-leveller and lateral guiding rolls - Automatic strip joiner - Intermediate strip guding stand - Break down section - Forming section : Universal CTA Forming section VAI CTA90 - Fin pass section - Welding section - Double Cooling tunnel - Sizing section - Off-Line sizing stands - Turk-head section - Motorised Exit roller conveyor Scope of supply: 1. Double expandable mandrel with PEELER OTO AD408 SD - Strip width 500mm - Hydraulic expansion - Snubber roll top/bottom - 8 Tn/arm - Pneumatic servocontrolled brake 2. Strip peeler - Strip opener Hsdpfsy Uhxksx Ab Aet 3. Strip Guiding 4. Break down section - 2 motorised stands - Monoblock casted stands - Hydraulic gauge compensation and quick setup - Shaft diameter 89mm - Mechanical SIKO indicator - Total installed power 106 kW 5. Forming section - Universal CTA Forming section VAI CTA90 6. Fin pass section - 2 motorised FP with rafted quick change - Monoblock casted stands - Hydraulic gauge compensation and quick setup - Shaft diameter 89mm - Mechanical SIKO indicator - Total installed power 106 kW 7. Welding section - 4-roll configuration - Heavy duty welding head with lateral and top adjustment 8. Double Cooling tunnel - 2 x 4000mm With V-rollers support 9. Sizing section - 4 motorised sizing cages - Total installed power 260kW - With quick-change rafted stands - SIKO bottom and top indicators 10. Off-Line sizing stands - 4 motorised sizing cages - Total installed power 260kW - With quick-change rafted stands - SIKO bottom and top indicators 11. Turk-head section - 3 turk-heads - Heavy duty changing plates 12. Complete set of rolls Round tube diameter: 33.7 - 88,9 mm Square tube diameter: 30x30 - 70x70 mm Rectangular tube diameter: 40x20 - 100x40 mm Thickness: 0.8 – 5.0 mm (6.0mm with S235J2) Speed: 100 m/min

Condition: used, Year of construction: 2018, total height: 4,000 mm, total length: 5,100 mm, total width: 3,800 mm, overall weight: 20,000 kg, POS POSmill H 800 U – 5-axis machining center The machine is designed as a 5-axis machining center and features a swivel axis with a range of -120° to +120°, as well as a rotary table with a continuously rotating 360° C-axis. A separate A-axis is not available. The working area is realized by a high-quality Kessler rotary table with a diameter of 800 mm. The machine is not equipped with a pallet changer. A key highlight is the 96-position tool changer, making the machine ideal for series production as well as complex machining tasks. In combination with the integrated through-spindle coolant system (IKZ) with 50 bar, the machine is well suited for demanding applications in toolmaking and the automotive industry. Operating data: Control ON: approx. 25,280 h Machine ON: approx. 24,730 h Program run: approx. 9,150 h Spindle hours: approx. 8,555 h 5-axis machining: Yes Spindle speed: 18000 - rpm Hsdsy An A Espfx Ab Aot Travel Y-axis: 820 - mm Dimensions (LxWxH) approx.: 5100 x 3800 x 4000 mm Weight approx.: 20,000 kg Control: Heidenhain ITNC 530 Travel Z-axis: 600 - mm Travel X-axis: 670 - mm Year of construction: 2,018 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes