Used Tracto-Technik Tubobend 48 for sale (12,467)

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 106357-11, total length: 3,140 mm, total width: 1,800 mm, total height: 2,470 mm, overall weight: 3,500 kg, type of input current: AC, input voltage: 400 V, The machine was equipped with a new machine control system in 2024 and underwent a complete mechanical overhaul in 2025. The extensive overhaul involved the replacement of almost all essential components. As a result, the machine is in almost new condition technically. New control system in 2024: - SIMATIC S7-1500 PLC control system - SINAMICS S120 drive system Mechanical overhaul in 2025: - New tailstock housing, drill bush holder, and spindle housing - New workpiece support and tool support - 2x high-frequency spindles - 2x tool holders - 2x rotating collet chucks - Quill, including bearing - Ball screw drive, including bearing - Linear guides - Radial piston pump - Water cooler - 2x drilling oil supply - Flow divider - Pipelines and hoses replaced - Various filters replaced - Complete repainting Optional: - Chip conveyor can be retrofitted Oil mist extraction: - Connections are available Tool accessories: - Individual design possible according to customer requirements/customer workpiece. Gbjdpez Irfvofx Afueu The deep hole drilling machine uses the single-lip drilling process. Information on the drilling unit: - Drilling diameter min/max: 1-12 mm based on ST 60 - Drilling depth: approx. 400 mm - Number of spindles: 2 - Spindle spacing: 120 mm - Spindle drive: 2 x 3.5 kW - Spindle speed, continuously variable: 1000 - 20000 1/min - Feed rate, continuously variable: 10 - 15000 mm/min - Rapid traverse: 15000 mm/min - Slide stroke (nominal): 800 mm - Center height (above table): 100 mm - Coolant supply: Deep hole drilling oil Machine frame: - Welded construction with integrated coolant tank - Top of the frame with continuous linear guide rails Spindle unit: - Motor spindles with frequency-controlled, continuously variable speed control. - Spindle head with connection for tool holder. Drill bush holder: - In cast design, fixed on the machine bed. - Holder for tool guidance system with Ø50 mm - Holder for sealing housing and immersion sleeves with bayonet lock Rotating tailstock: - With drive for rotating workpiece - Clamping quills with workpiece length compensation Inspection of the machine and further information are available on request.

Condition: good (used), Year of construction: 2017, operating hours: 14,500 h, functionality: fully functional, fuel type: diesel, color: white, Equipment: additional headlights, air conditioning, cabin, lighting, For sale is a used Syncrofalke 3t cable crane ("mountain harvester"), manufactured by Mayr Melnhof Forsttechnik GmbH for forestry operations. Year of manufacture: 2017 Equipped with a Woody 60 processor head (including a flail saw). Carriage: Sherpa U Carrier vehicle: MAN TGS Can be inspected at any time during operation. Gbjdpfewtw Apsx Afueu Special features: Ideal for steep slopes and difficult terrain! Very robust design for full-scale forestry operations. Regular maintenance – ready for immediate use! Condition: Technically and visually well-maintained. Ready for use without any outstanding maintenance requirements.

Year of construction: 1998, condition: used, Technical details: pipe system - processing diameter: - mm pipe system - inlet: - mm volume flow ventilator - shred: - m³/h connection electric: 400 V Air volume: 2700 m³/h filter surface area: 52,5 m² volume: 18,7 L max. temperature: 50 Grad operating pressure: -/+ 0,1 bar weight of the machine approx.: 1250 kg Gbodpfow Awwfsx Afuju Pressure max.: 5 bar dimensions L x W x H: 2,3 x 2,35 x 2,8 m Extraction of fibers - Reduction of spillage in transport containers, eg. Big Bags. / YOM approx. 2010 delivery scope: Suction fan Manufacturer Dantherm Filtartion, type T 0,56-224 RD0 D1, air supply quantity 2600 Nm³ / h, suction nozzle Ø 150mm to Ø 100mm, blow-out nozzle Ø 130mm to Ø 100mm Chip separator Two doors with attached air filter, door opening W x H: 1000 x 1960mm, interior space W x D x H: 1200 x 1160 x 1950mm, with filter attachment 1100 x x1100 x 350mm, filter surface 1200 x 1200mm, 2pcs filter (filter mat) 1200 x 600 x 50mm, insertion nozzle dia. Ø 100mm, with clamping bag attachment Optional accessories: -div. clamping bag -div. connecting tubes Ø 100 x 1000mm -div. connecting tubes Ø 100 x 300mm -div. connecting tube Ø 100 x 320mm -div. angle connections Ø 100mm -div. bayonet catches for pipe connections i.D. *

Condition: good (used), Year of construction: 2019, Volume measuring device incl. weight detection for master data acquisition, Bosche – used: Price ex works: now only €4,500.00 instead of €8,500.00 (net)! Manufacturer: Bosche Wägetechnik Type: zippcube Gsdpfx Aoxqffdefusbu Should be size M Serial No.: Z201900158 Year of manufacture: should be 2019 Max. 50 kg 16-20 V/DC Weight of scale: 110 kg With HMI 12 display Combined volume and weight detection in a single process Ideal for master data acquisition with space requirement measurement New price: approx. €20,000.00 (net) zippcube M | Volume and weight detection up to 50 kg. Robust design, precise load cells and intuitive software for efficient logistics. Condition: good Available: immediately Location: Biberach

Condition: new, functionality: fully functional, Year of construction: 2022, overall weight: 150 kg, total height: 2,300 mm, total length: 1,200 mm, total width: 600 mm, load capacity per stand: 5 kg, working range: 400 mm, Feeding and storage system for light articles in trays. Feeding of trays for magazine storage in automated production. Especially for surface or contour sensitive parts. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm. • Fast tray change time (4-8 seconds) • Tray weight incl. workpieces max. 5kg • Tray stacker weight max. 50kg • Positioning accuracy ± 1mm • PLC control with operating and monitoring display • ESD equipment • Safety package light curtain - Leuze for tray stacker • Preparation communication AGV - Siemens IWLAN client • RFID read-write head • Autonomy time increase 1 stack • Machine safety: active door interlock • Low space requirement, due to compact design Gbsdpfxoxrgkws Afuou • Flexible adaptation to different machines, due to different interfaces • Low investment costs • Complete equipment • Stable design • (solid steel construction, powder coated) • No machine adapters necessary • Supply voltage 400V / 50Hz / 3ph • Compressed air connection min. 6bar • Dimension: 1200 x 600 x 2300mm (LWH)

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 14 kg, warranty duration: 12 months, input voltage: 230 V, total length: 420 mm, total height: 450 mm, total width: 245 mm, volume flow: 420 m³/h, Equipment: chassis, low noise, Fume extraction with remote control and suction hose Air inlet interface ρm flange Gbsdpfx Afexrgl Iouou Max. Power 300W Air velocity 24/ms Filtration efficiency 0.3 µm / 99.97%. Noise 59ᐸdb Length of suction hose 1.5M System shear flow approx. 420m³/h Dimensions L420 x B245 x H450 Weight 14.0kg Application: This product is suitable for places dealing with air pollution such as smoke, peculiar odors, dust, toxic and harmful gases generated during soldering process, laser marking and engraving, printing, etc. - Extraction unit for use in the workplace - Separately replaceable fine dust pre-filter M5 - Large HEPA H 13 filter surface with 2.4m² for optimum particle filtration and long filter service life - Activated carbon for effective gas cleaning - Portable extraction unit, for flexible placement directly under or next to the workplace - Easy filter change - Variable power control through percentage speed settings in 10 steps - Health protection through electronic filter monitoring and filter alarm - Long service life thanks to high-quality EC blower - Quick, easy and stable installation thanks to Easy-Click system

Year of construction: 2019, condition: excellent (used), input voltage: 400 V, machine/vehicle number: 3365, BVL Yukon DAK-2 BL 500/400/4000, year of manufacture 2019, machine no. 3365. Two-track continuous washing system for aqueous cleaning and degreasing of shafts, followed by drying. The two washing tracks are separated by a partition and each has its own washing tank. The parts are cleaned on each track and then blown off/dried. The system was designed for integration into a production line with an on-site pallet conveying system. Technical data: - Two washing tanks, each with a capacity of 1,000 liters - Electric tank heater: 2 x 45 kW - Documented washing temperature range: 45-60 °C - Washing pumps: 2 x 4.0 kW; spray pressure 3.0 bar each - Coarse filter: 1 mm; bag filter: 50 µm per washing circuit - Usable length: 250 mm; usable width: 2 x 250 mm; usable height: 400 mm Godpfx Afoz A Eidsuobu - Control system: Siemens SIMATIC S7-1500, CPU 1513-1 PN - Operator panel: Siemens TP700 Comfort - Operating voltage: 3 x 400 V, N+PE, 50 Hz Equipment: - Unheated drying with side-channel blower and blow-off fan per track - Automatic cleaner dosing and concentration monitoring via Libelle Cleaner Control - Condenser - Automatic cleaning of the blow-off zone - Nozzle system with quick-release fittings - Four viewing windows with internal lighting - Control panel on the support arm system Transport/installation dimensions according to the layout plan: 4,000 x 2,000 x 2,938 mm (L x W x H). Technical documentation available, including operating manual, layout plan, electrical and pneumatic diagrams, maintenance documents, spare parts lists and PLC project archive. Location: Waldmohr. Condition: very good (used). Price on request. Internal reference: 781461. Technical data according to available manufacturer documentation.

Condition: excellent (used), Year of construction: 2024, operating hours: 6 h, functionality: fully functional, Manufacturer: Spaleck Oberflächentechnik Model: Z1 Year of manufacture: 2024 Used, like new condition Operating hours: 6 h Technical data according to the manufacturer: Working container volume: 11 l Usable volume: 7 l Gbjdpfoz H Rfxox Afuou Turntable speed: approx. 280 rpm Drive power: 0.75 kW Height of working container: 1,000 mm Operating voltage: 400 V, 50 Hz Dimensions (W x D x H): approx. 530 x 950 x 1,350 mm The system has been dismantled and is stored at our facility. An inspection is possible by appointment.

Year of construction: 2009, condition: used, Kampwerth PS screw compactor – year of manufacture 2009 Used screw compactor from Kampwerth Umwelttechnik for compacting waste and recyclable materials. Technical data: Manufacturer: Kampwerth Umwelttechnik Model: PS Year of manufacture: 2009 Connection voltage: 400 V Frequency: 50 Hz Current consumption: approx. 22.5 A Protection class: IP65 Weight: approx. 1,800 kg The screw compactor is suitable for reducing the volume and compacting corresponding waste and recyclable materials. Gjdpsz Ht Iisfx Afuobu Inspection possible by arrangement. All information without guarantee. Subject to prior sale.

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 45 kg, total length: 350 mm, total width: 605 mm, total height: 1,080 mm, input voltage: 230 V, laser power: 20 W, laser wavelength: 1,064 nm, scan area length: 70 mm, scan area width: 70 mm, type of cooling: air, type of input current: AC, laser type: fiber laser, The mobile laser LAS 23 portable is characterized by its compact design. Small, handy and with custom-made attachments that can be individually exchanged in the quick-change system. With its mobile base, it can be moved to the workpieces to be marked. This makes it suitable for small, large and heavy workpieces. Gbodpjzxcfkefx Afuju With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Made in Germany - Fiber laser 20W (optional: 30 Watt, 50 Watt) - Laser class 1 - CE compliant, according to EU directives - Wavelength 1064nm - Marking field size 70x70mm (optional: larger) - Signal lamp for indication of operating status - marking software EZCAD - Connection 230V - Air cooled - Laptop with Windows operating system - Dimensions: 350 x 605 x 1080mm (LxWxH) - Weight: approx. 40 Kg - weight of portable laser unit 2,8 Kg - Fiber optic cable approx. 2,50 m - Extraction optional

Year of construction: 2012, condition: good (used), Separator sluice / cell wheel sluice Nestro, year of manufacture 2012, for the separation / differentiation of paper chips or paper edge sections. Technical data: Manufacturer: Nestro Lufttechnik GmbH Year of manufacture: approx. 2012 Motor: 4 kW Volume flow rate max. 28000 m³/h Inlet diameter max.: 450 mm Speed: 22 rpm Rotor width: 1500 mm Rotor diameter: 1200 mm Dimensions: 2200 x 2200 x 2500 mm (L x W x H) Weight: approx. 3000 kg Note: The machine is in good condition. It was inspected and tested by us in 28816 Stuhr. The video can be found at the top of our website or on our YouTube channel. Inspections, including under power, are possible at any time by arrangement. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are non-binding, subject to prior sale, and can be revoked at any time. Gbjdpfxozt Ipko Afuou Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Condition: good (used), Year of construction: 2022, operating hours: 194 h, lifting height: 3,600 mm, fuel type: electric, color: red, Drivetrain Drive: Wheel Weights Empty weight: 906 kg Gbjdpfx Afjzymg Ieusu Functional Lifting capacity: 230 kg Working height: 560 cm Dimensions of cargo space: 153 x 76 x 206 cm CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: good Visual appearance: good Other information Remanufactured: Yes Delivery terms: EXW Latest inspection: 2026-09-02 Surface type: Slab Additional information Please contact Rothlehner Arbeitsbühnen GmbH for more information

Condition: used, Höcker Polytechnik Type L 350 radial fan for extracting swarf, dust and light wood waste in woodworking workshops. The fan is ideally suited for use in extraction systems on individual machines or small machine fleets and ensures reliable air flow during continuous operation. Thanks to its robust industrial design, it is engineered for continuous use in workshops and production facilities. Gbsdpfxozrypto Afusu Technical data: - Motor power: 11 kW - Inlet: 350 mm - Outlet: 350 mm - Air flow rate: 9,770 m³/h

Condition: good (used), Year of construction: 2019, Heck DVAS 180 Refrigeration Unit, 180 kW Professional, industrial refrigeration unit from the premium manufacturer HECK Kältetechnik GmbH. The unit is in very good condition for its age and has been reliably used until recently. Thanks to the modern refrigerant R513A, the unit is future-proof and meets current environmental and efficiency standards. Production cooling with heat recovery Technical data (according to the nameplate): Manufacturer: HECK Kältetechnik GmbH Model / Type: DVAS 180 Machine No.: T-19307 Year of manufacture: 2019 Refrigerant: R513A (Max. filling weight: 98 kg) Operating voltage: 400 V / 50 Hz Operating current: 85.4 A (Max. operating current: 141 A) Max. operating pressure: ND 19 bar / HD 28 bar CE certified: Yes (Number 0036) Performance data & application area Refrigeration capacity: 180 kW – Ideal for efficient cooling of large halls or commercial areas. Heating capacity: 290 kW – Highly efficient air heating through clever use of waste heat from the refrigeration cycle. Dehumidification capacity: approx. 100 liters per hour – Perfect for precise humidity control. Application areas: Due to these combined performance data, the unit is ideally suited for industrial production halls, large warehouses, logistics centers, or for demanding process cooling and commercial dehumidification. Gbedpjzrlzzofx Afueu The following precise operating temperatures can be derived from the technical specifications and design data in the documentation for the Heck DVAS 180: 1. Refrigeration core area Evaporation temperature: The unit is designed for an evaporation temperature of 6 °C. Condensation temperature (liquefaction): The water-cooled plate condenser operates at a condensation temperature of 43 °C. 2. Air-side temperature ranges (process air) Depending on which ventilation or unit (e.g., cabin, cooling zone, or ADZ unit) is used, the air inlet and outlet temperatures vary: Standard cooling zone: Air inlet at 26.5 °C is cooled down to an air outlet temperature of 19 °C. Cabin air conditioning (ULA): Air inlet at 26 °C is conditioned to an air outlet temperature of 22 °C. Process air dehumidification (ADZ): The air enters at 26 °C and leaves the evaporator strongly dehumidified at 10.3 °C. Reheating (ADZ unit): A water-cooled reheater can raise the cooled air from 10 °C back to 17.5 °C. 3. Water-side temperature ranges (cooling water / heat recovery) Plate condenser (condenser cooling): Is designed for a water inlet of 32 °C and a water outlet of 38 °C (at a flow rate of 35 m³/h). Plate heat exchanger (heat recovery): Uses the hot gas energy to heat water from 42 °C to 47 °C. "One-stop shop: We would be happy to offer you suitable bank financing for your project." More articles - new and used - can be found in our shop! International shipping costs on request!

Year of construction: 2019, condition: good (used), Venjakob RNV 2.0 Exhaust Gas Cleaning System This system incinerates gaseous pollutants and odors from the production exhaust air, releasing clean air into the environment. Extraction: Solvent-containing or odor-laden process air (e.g., from painting systems, the chemical industry, or printing plants) is fed into the system. Preheating: The contaminated air flows through internal ceramic heat storage units and is heated to a very high temperature. Combustion (Oxidation): In the combustion chamber, the natural gas inlet (the pilot burner) ignites the air. At a temperature of up to 850 °C, the organic pollutants (VOCs) completely break down into harmless water vapor (H₂O) and carbon dioxide (CO₂). Energy Recovery: The cleaned, hot air then flows through a second ceramic bed and releases its heat there. The system "stores" the heat for the next batch of contaminated air. This makes the system extremely energy-efficient, as after the start-up phase, hardly any additional gas needs to be supplied. System Data Manufacturer: Venjakob Umwelttechnik Type: RNV 2.0 Year of Construction: 2019 Manufacturing Number: 15212 Throughput Volume: 2,000 Nm³/h Gas & Combustion Gas Type / Heating Value: Natural Gas H / 10.4 kWh/Nm³ Firing Heat Output Range: 30 kW Flow Pressure: 200 - 1,500 daPa Max. Combustion Chamber Temperature: 850 °C Gbedpfx Ajzrl Ibjfuou Electrical Connections Grid Connection: 400 / 230 V AC Connected Load: 24 kVA Current Consumption: 35 A "Everything from a single source: We would be happy to offer you suitable bank financing for your project." More articles – new and used – can be found in our shop! International shipping costs upon request!

Condition: used, Year of construction: 2014, operating hours: 628 h, 2014 | PB Lifttechnik PB S151-16E | Used Scissor Lift | 628 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 13900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 35 inspection points 35 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: machine in good working condition 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41247 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: Gsdpfx Afjzw N T Esusbu ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, functionality: fully functional, The IBD Wickeltechnik industrial unwinding-shaft assembly is designed to support and controllably unwind rolls of web material. It incorporates an unwinding shaft supported by KL.S-series foot-mounted safety chucks, a CX.250.4 single-disc pneumatic brake, and forced cooling from a 24 V DC fan. The safety chucks allow for rapid shaft loading and removal, while the locked closure secures the journal during operation. The brake uses four pneumatic calipers, a 250 mm self-ventilating cast-iron disc, and a modular design that enables control of the braking torque through air pressure. The assembly is mounted on an adjustable, wheeled steel transport frame. Manufacturer: IBD Wickeltechnik GmbH Gbjdpfxozw Uilo Afuju Device type: industrial unwinding-shaft assembly with pneumatic brake Safety chuck model: IBD-KL.S.O.1800.0380.1.40.VT Safety chuck series: KL.S Safety chuck configuration: foot-mounted Maximum shaft and roll weight: 1800 kg Maximum safety chuck torque: 380 Nm Square journal range: 30–40 mm Triangular journal size: 36 mm Brake model: CX.250.04.28.0/V.24 Brake type: pneumatic, single-disc, air-cooled Number of brake calipers: 4 Brake disc diameter: 250 mm Disc material: cast iron Minimum braking torque: 6 Nm at 0.2 bar Maximum braking torque: 640 Nm at 6 bar Maximum permissible brake speed: 2500 rpm Fan voltage: 24 V DC Safety chuck serial number: 6800.37879.1/47.18 Brake serial number: 6800.37879.12/47.18

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 94681, travel distance X-axis: 700 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, overall weight: 3,000 kg, ZEISS PRISMO 5 3D coordinate measuring machine with VAST probing system For sale is a used ZEISS PRISMO 5 3D coordinate measuring machine, serial number 94681. The machine is equipped with a ZEISS-VAST probing system and a comprehensive multi-probe changer. A machine-side ZEISS control console is also included. Additionally available is a cabinet with probes, which is not included in the stated machine price and can be offered separately if desired. Details regarding the content and scope of the probe inventory can be provided upon request. Machine data Manufacturer: ZEISS Gedpfxszwvk Rs Afusbu Model: PRISMO 5 Serial number: 94681 Probing system: ZEISS VAST Equipment: Multi-probe changer Condition: used ZEISS service and inspection marking The machine has a marking from the technical service department of Carl Zeiss IQS Deutschland GmbH, referring to an inspection according to DIN EN ISO 10360. Documented specifications: MPE(E0): 2.70 + L/250 P: 2.00 RONt: 4.40 Type: PRISMO 5 Serial number: 94681 Calibration date: 02/2025 The values stated are reproduced according to the ZEISS marking on the machine. ZEISS CALYPSO 5.8 is visible on the existing control PC. The exact scope of the license or the transferability of an existing software license is not part of this information and can be checked separately if desired. Optionally available In addition, there is the possibility of purchasing a separate cabinet with a comprehensive inventory of ZEISS probes and accessories. This cabinet is not included in the machine price and can be offered separately if desired. Condition and inspection The machine is in used condition. An inspection is possible after prior arrangement. The exact scope of delivery can be agreed upon or checked based on the available components if there is concrete interest. Errors, changes and prior sale are subject to change. HOLZHÄUER Hydraulik & Maschinenbau GmbH

Condition: used, Year of construction: 2026, New demonstration machine! List price €21,690 net. High-performance dust extraction unit for extracting dust from machining centers, suitable for installation in the work area outside of potentially explosive zones. Key design features: - Galvanized steel sheet construction - Space-saving due to its compact design - Delivered in operational condition - ATEX - Impact resistance tested (FSA) - Low energy consumption with high performance thanks to a high-performance fan arranged on the clean air side with a special impeller - Energy-saving motor of efficiency class IE3 - 3 large-volume collection containers with liner bags - Collection volume 495 liters - High operational safety and long service life thanks to BGIA-tested filter hoses - Compressed air pulse cleaning ("Jet" cleaning) with time-dependent control for regenerating the filter surface - Alpha control with automatic start function (slide valve control available at extra cost) - Connection cable, 5 m long, with plug - Automatic fire suppression system with special extinguishing agent container (no connection to the water supply required) - The extinguishing agent, ABC powder, is not suitable for fires involving metals as well as cooking fats and oils - Check valve, type-tested - Design according to DIN EN 16770 - Residual dust content in the exhaust air below 0.1 mg/m3 - Passed GS-HO-14 "GS - H3" test - A T T E N T I O N ! - The compressed air pipe from the compressed air tank, a pressure regulator, a maintenance unit, a filter and a water separator are not included in the scope of delivery. These parts must be connected on-site. - The pressure regulator must be mounted directly in front of the compressed air tank in the supply line. The compressed air must be absolutely dry, dust-free and oil-free. - N O T I C E ! - Uniform filling of the collection containers cannot be guaranteed due to process-related reasons. Gbjdpozxtz Nefx Afueu Suction nozzle arrangement: Left Nominal volume flow *) : 3535 m3/h Maximum volume flow: 5500 m3/h Negative pressure at the interface *): - At nominal volume flow: 2950 Pa - At maximum volume flow: 2200 Pa Filter area: 20.5 m2 Suction nozzle: 250 mm Nozzle height, approx.: 968 mm, center Motor - Fan: 5.50 kW, 3x400 V, 50 Hz Fuse: 32 A (on-site) Compressed air connection: 1/2 " (on-site) Operating pressure: 4.5 bar Compressed air consumption: approx. 45 Nl, per compressed air pulse with an impulse time of: 60 ms Sound pressure level: 73.0 dB(A) Weight, approx.: 760 kg Dimensions, L x W x H: 2750 x 1030 x 2500 mm *) Mandatory information according to GS-HO-07 at 20 m/s and with the filter hoses under load (beech test dust). In the delivery condition and under practical conditions with coarser dust, the suction power is significantly higher. Scope of delivery: - Filter hoses, externally pressurized, permeability < 0.5 % (BGIA) - Energy-saving motor of efficiency class IE3 - 3 large-volume mobile collection containers - Mitsubishi-Alpha control with automatic start function (6 I-coils can be connected) and runtime addition - Input for external shutdown signal (limit switch, etc.) - Jet cleaning with time-dependent control - Type-tested check valve - Automatic fire suppression system (with special extinguishing agent) "GS-wood dust tested - H 3" Optional equipment: Control on the operator side IE5 efficiency power pack Up to 25% efficiency advantage with the optional IE5 efficiency power pack. Vacumobile with IE5 synchronous motors reduces your electricity consumption an

Condition: used, Year of construction: 2016, Waste disposal system consisting of: 1 Clean air dust collector with briquetting press JP 350-L 1 Clean air dust collector with rotary valve airlock JZ 350-L Year of manufacture: 2016 Gsdpfx Afsz Rrbdeusbu Technical data JP 350-L: Suction nozzle: 350 mm Nominal volume flow: 6580 m³/h Maximum volume flow: 8000 m³/h Negative pressure at nominal volume flow: 2750 Pa Motor power: 11 kW Rated speed: 3000 rpm Technical data briquetting press CS3-12: Throughput capacity max. 50 kg/h or 0.75 m³/h (material-dependent) Motor, hydraulic pump: 3.0 kW Motor, agitator: 0.37 kW Motor, dosing screw: 0.75 kW External fuse: 16A Briquet diameter: 65 mm Weight: 780 kg Storage container: 1200 x 1200 mm Overall external dimensions: 3150 x 1625 x 2742 mm Space required: 4500 x 3000 x 2900 mm Availability: approximately 11/2027 Location: Hesse

Condition: used, D+P Dosing and Testing Technology 05-755-011, used industrial spare part Used industrial spare part from Dosing and Testing Technology GmbH. Manufacturer: Dosing and Testing Technology GmbH Godpfxoz N Hgxs Afuobu Part number: 05-755-011 Condition: Used Quantity: 3

Condition: used, Year of construction: 2009, functionality: fully functional, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, suction capacity: 6,000 m³/h, intake manifold diameter: 300 mm, filter area: 28 m², total height: 2,500 mm, total length: 3,150 mm, total width: 1,030 mm, overall weight: 900 kg, Wood chip extraction system, dust extraction system, self-cleaning filter, vacuum system – Hoecker Polytechnik brand. Model: Vacumobil JT 300 – with pneumatic cleaning of filter bags using compressed air during operation. Year of manufacture: 2009 Fan power: 7.5 kW Capacity: 6,000 m3/h Filtration area: 28 m2 Air return Dust tank capacity: 495 liters Equipped with an automatic fire suppression system Inlet diameter: 300 mm Gbsdez Nxxaepfx Afusu Stock number: 1172

Year of construction: 2022, condition: like new (used), functionality: fully functional, machine/vehicle number: WDW-70056, WDW – Calibrated containers – Continuous weighing scale for weighing wood pellets or other pellet-shaped bulk goods, complete with a discharge unit. Performance / throughput: 15.6 tons/hour; weighing accuracy: +/- 0.01 kg; cycle times: approximately 2 weighings per minute; the photo shows a representative image; the machine is delivered in its original packaging. Gedpfjz Ixc Isx Afuebu

Condition: excellent (used), Used, electrically heated stainless steel tank / transport container Last use: Chemicals Item number: 10907 Volume: 1000 L Type: Upright, mounted on a stainless steel frame Material (in contact with medium): 1.4301 / AISI304 Design: With electric heating Bottom: Curved Top: Curved Operating pressure according to nameplate: 0.30 bar Tank dimensions: Overall width: 1200 mm Overall length: 1200 mm Overall height: 1675 mm Distance from outlet to bottom: 240 mm Materials: Inside: 1.4301 / AISI 304 Frame: Stainless steel Gjdpfoz Ixgysx Afuebu Features: Nameplate: Yes Outlet valve: Disc valve Outlet diameter: DN50 Electric heating Empty weight: 433 kg

Year of construction: 1992, condition: used, functionality: fully functional, machine/vehicle number: 029.700, Painting/drying booth from Luft- und Trockentechnik GmbH, type KSP 6-BT, manufactured in 1992. The system is suitable for painting and drying workpieces and features an integrated exhaust/extraction system. Technical data: Manufacturer: Luft- und Trockentechnik GmbH Type: KSP 6-BT Year of manufacture: 1992 Manufacturer's number: 029.700 Usable volume: approx. 72 m³ Total volume: approx. 81 m³ Minimum exhaust air volume flow: 1,440 m³/h Maximum permissible oven temperature: 90 °C Maximum solvent quantity: 4,302 g/oven load Gedpfx Ajz D Evyefuobu The painting booth has dimensions of 6 x 4 meters. The system includes an exhaust duct with extraction via the roof. In addition, a suspension/transport system is located in the ceiling area, to which workpieces or painting racks can be attached and moved through the work area. Dismantling will be carried out by the buyer.