Used Trumpf Punching Machine for sale (65,192)

Condition: ready for operation (used), In use from 1991 until it was last used and has been little prone to problems despite being a 1990s Chinese punching and riveting machine for oval eyelets. Kodpfx Ajx Nd U Dearelt

Year of construction: 1963, condition: used, functionality: limited functionality, machine/vehicle number: 512804, 1963 Bobst SP900E with double action stripper in reasonable/good condition. Klodpfx Ajtyqizsaret Well-maintained.. in recent years for example sprocket wheels, main gripper chains, counterplate under cuttingplate, cardan joints to the feeding head, have been renewed (original Bobst parts) Gripperbars have not been renewed recently, they are still in quite a good condition. The knee joints have almost no signs of wear. they were probably at some point and the machine has not been used much since then. There is hardly any screech on them. Machine is dismantled in our storage in the South of The Netherlands, dismantled and not under power. For seriously interested potential buyers we will further upgrade the machine and assemble it and give the possibility to test it inevery way they want. In that case price will be 22,000 euros, loaded on to your transport, EX SITE

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 1203697, Bros. punching press Make: Haulick & Roos Type: RVD 8/800 NS Press with adjacent console: Haulick & Ross RVD 80-800NS Eccentric press with double connecting rod with 4-fold bearing mounted eccentric shaft No: 1203697 YEAR OF MANUFACTURE: 1990 Press force: 800kN Speed: 30-300/min. Drive: 26kW Ram stroke: 4-60mm ram adjustment: 80mm Table: 800x640mm Fold-through hole: 780x60-160mm Table over floor: 1240mm Frame width: 780mm Lateral upright width: 350mm Installation height max. stroke bottom/ram top: 300mm Space required for press (LxWxH): 3200x1700x3000mm Control cabinet (LxWxH): 1800x400x 1900mm Weight: 12.000kg Reel: Eigl 2527-90 Kedpeudn Utsfx Aarelt Driven: no Straightener with strap loop sensor: Eigl RST W37/300 (2528-90) Max. width: 300mm Max. Thickness: 3mm Number of rolls: 5 Feed rate: Haulick & Roos RS 260/120°/2727 Max. Feed length 260mm Max. Width 260mm Max. Max. thickness 3mm Feed speed 40m/min. Material cross-section up to 800mm?

Condition: used, Year of construction: 1997, functionality: fully functional, BAIER Geba 46/A embossing and punching machine, year of manufacture 1997 Kledeyt Igwopfx Aaret fully operational - two punching units - Geotin cutter - operating documentation max. material width: 250 mm max. punching width: 240 mm heating power: 2200W embossing force: 100kN

Condition: used, Year of construction: 1995, operating hours: 42,416 h, functionality: fully functional, machine/vehicle number: 10317, total height: 3,100 mm, feed length X-axis: 120 mm, ram adjustment: 64 mm, table height: 1,250 mm, pressing force: 50 t, stroke length: 16 mm, stroke adjustment: 51 mm, clearance between the columns: 1,200 mm, DGUV certified until: 06/2026, year of last overhaul: 2025, For sale is a Bruderer BASTA 50 UL, a high-performance stamping press designed for precise and reliable results in series production. The machine is currently integrated into ongoing production and can therefore be viewed and tested under real operating conditions. Inspection and extensive functional testing are possible until the end of calendar week 20/2026. Ksdpfx Aajyu Sn Iorolt Thanks to continuous use, the machine is in excellent technical condition and ready for immediate operation. All maintenance and servicing work has been carried out regularly and meticulously. Technical data: Rated force: 500 kN Strokes per minute: 100-1120 spm Feeder: BBV 202/120 Adjustable stroke: 16-51 mm Die space / Clamping plate: 760-940 mm Main drive power: 22 kW Power supply: 400 V / 50 Hz Adjustable stroke: 16-51 mm Ram surface: 980 x 420 mm Table surface: 940 x 580 mm Adjustable strip entry height: 50-140 mm Max. strip width: 203 mm Max. material thickness: 2 mm Machine dimensions: 2700 x 1800 x 3100 mm Weight: 8150 kg "Main drive on (actual running time): 42,416 hours" An acoustic enclosure is available as an option.

Condition: used, Year of construction: 1994, operating hours: 28,067 h, functionality: fully functional, machine/vehicle number: 10000, total height: 3,460 mm, feed length X-axis: 200 mm, ram adjustment: 76 mm, table height: 1,200 mm, total width: 1,750 mm, total length: 1,840 mm, table length: 970 mm, table width: 910 mm, stroke length: 16 mm, stroke adjustment: 63 mm, clearance between the columns: 1,230 mm, DGUV certified until: 06/2026, year of last overhaul: 2025, For sale is a Bruderer BASTA 80H – a proven and powerful high-precision stamping press designed for maximum reliability and accuracy in series production. The machine is currently still in operation and can therefore be inspected and tested under real production conditions. Acceptance and trial runs are possible until calendar week 17/2026. Due to its ongoing use in production, the system is in technically flawless and fully operational condition. Regular maintenance and servicing have been carried out. Technical highlights (excerpt): Machine type: Bruderer BASTA 80H Field of application: High-precision stamping for series production Condition: Technically flawless, ready for immediate use Availability: By arrangement / from CW 17/2026 A soundproof cabin is optionally available. Technical details: Nominal force: 800 kN Stroke rate: 100–1000 spm Feed unit: BBV 320/200 Adjustable stroke: 16 – 63 mm Die area / Bolster plate: 970 mm Main drive / Power: 43 kW Power supply: 380 V / 50 Hz Klsdpfxsyu Nipo Aarjt Ram surface: 760 x 510 mm Table surface: 950 x 910 mm Adjustable strip entry height: 80–180 mm Max. strip width: 360 mm Max. material thickness: 3 mm Machine dimensions: 2834 x 1742 x 3460 mm Weight: 15,550 kg

Condition: like new (used), Year of construction: 2022, functionality: fully functional, punching force: 18 t, working range: 2,500 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, Used Trumpf TruPunch 3000 S20 with Sheet Master Compact sheet load and unload for sale Technical data TruPunch 3000 medium format (S20) Dimensions, weights Width 6282 mm Depth 6548 mm Height 2195 mm Weight with all units 10700 kg Control, hardware, electrics Hard disk type SSD Number and size of the hard disc 2 GB x 120 GB Hard disk memory for customer programmes 10 GB Screen Touch screen Screen size 21.5 in Interface USB Network connection RJ45 Control type Bosch CML75 Operating system Windows 10 IoT Axis data X/Y/C axis drive NC-controlled, maintenance-free three-phase current servo motors Punching head drive Electric drive Maximum axis speeds - X axis 90 m/min Maximum axis speeds - Y axis 60 m/min Maximum axis speeds - Simultaneous 108 m/min Maximum axis speeds - C axis (punching) 350 rpm Maximum axis speeds - C axis (tapping) 350 rpm Maximum punching stroke rate (E = 1 mm) 800 1/min Maximum marking stroke rate 1000 1/min Precision - Positioning deviation Pa +/- 0.1 mm Precision - Position range Ps +/- 0.03 mm Precision - Smallest programmable increment 0.001 mm Working range and workpiece size Maximum sheet thickness 6.4 mm Maximum workpiece weight 150 kg Working range - X axis 2500 mm Working range - Y axis 1250 mm Punch-specific data Maximum punching force 180 kN Maximum presser foot force 20 kN Maximum tool size, punching (outer circle) 76.2 mm Maximum tool size, forming (outer circle) 101.6 mm Single tool changing time 2.8 s MultiTool changing time 0.5 s Number of linear magazine stations 20 pieces Number of tools when using MultiTool / clamps 18 pieces - 180 pieces Loading / part removal Maximum part size, part removal flap, punching 400 mm x 600 mm Flap size (X x Y) 400 mm x 1250 mm Maximum part size, fixed chute, punching 180 mm x 180 mm Connected loads, ambient temperature Pressure range, compressed air connection minimum (same direction) / maximum (static) 7 bar / 14 bar Painting Main colour white, NCS S 0505-R80B Secondary colour blue, RAL DESIGN 250 20 20 Switch cabinet/periphery grey, RAL 7040 SheetMaster Compact 2500 x 1250 mm (AK05) General Maximum Y1 axis traverse speed (suction frame) 27 m/min Maximum Y2 axis traverse speed (unloading cart) 18 m/min Maximum Z axis traverse speed 20 m/min Y/Z axis drive Asynchronous motors controlled by frequency converter Loading Maximum sheet size 2500 mm x 1250 mm Minimum sheet size 1000 mm x 1000 mm Minimum sheet thickness 1 mm Klsdpeykt N Sefx Aarjt Maximum sheet thickness 6.4 mm Maximum sheet weight 160 kg Unloading Minimum sheet thickness 1 mm Maximum sheet thickness 6.4 mm Maximum sheet weight 160 kg Maximum stack height 190 mm Painting Main colour white, NCS S 0505-R80B Secondary colour blue, RAL DESIGN 250 20 20

Condition: refurbished (used), Year of construction: 2026, pressing force: 25 t, Order machine High-speed punching press B250-740, completely overhauled Table length 740 mm, optionally also 850 mm, Kjdpfx Aajw U A Eworolt Adjustable stroke 13 to 38 mm, As an alternative to the Bruderer BBV 190/85 roller feeder, a servo feeder can also be installed. Contact us for detailed offers.

Condition: used, Single-Column Eccentric Press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture: 1962 Pressing force: 63 tons Throat depth: 260 mm Table size: 630 x 530 mm Table opening: Ø 210 mm Ram area: 315 x 260 mm Klodpfxok S Htxj Aarot Adjustable ram stroke: 8–100 mm Ram adjustment: 63 mm Ram shank bore: Ø 40 mm, with clamping piece Installation height: max. 450 mm Strokes per minute: 115 spm Air requirement: min. 4.5 bar Motor power: 4 kW Electrical connection: 380 Volt, 50 Hz Table height above floor: approx. 750 to 900 mm - Electric stroke release via foot switch or two-hand control - Overload protection by shear plate - Clutch-brake combination via WEINGARTEN friction-threaded clutch with TDC safety - Front crankshaft support bearing - Press table height adjustable via 2 threaded spindles - Manual central lubrication system - Free-standing electrical cabinet - UVV (accident prevention regulations) for manual loading operations Space requirements (L x W x H): 1750 x 1600 x 2430 mm Weight: 4.5 tons In good condition

Condition: ready for operation (used), Year of construction: 2000, operating hours: 34,744 h, functionality: fully functional, machine/vehicle number: 258 032, overall weight: 11,500 kg, punching force: 20 t, positioning accuracy: 0.07 mm, tool diameter: 89 mm, TECHNICAL DETAILS Machine capacity: 196 kN (20 t) Air pressure: 5 bar Air consumption: 250 Nl/min Oil capacity: 160 l Turret speed: 25 rpm Travel Ranges Machine travel range without repositioning: 1,250 mm x 2,000 mm Machine travel range with 1 repositioning: 1,250 mm x 4,000 mm Machine travel range with 1 repositioning and 1 turning: Turning not possible Processing Max. sheet thickness with ball table: 6 mm Max. sheet thickness with brush table: 3 mm Max. table load: 100 kg Klsdpfsyn Nybjx Aarst Precision Punching accuracy (in standard mode): ±0.1 mm Positioning accuracy (repeatability): ±0.07 mm Control and Axes Pneumatic clamping devices: 2 Number of simultaneously controlled axes: 3 (X, Y, C) Performance Strokes per minute, feed 25.4 mm: X320 / Y250 Nibbling work cycle, feed 1 mm: X920 / Y920 Tooling Minimum programmable increment: 0.01 mm Number of tools: 31 Max. tool diameter: 88.9 mm Amadex stations: 2 x 11 1/4" + 1 x 2" MACHINE DETAILS Connected load: 30 kVA Operating hours: 53,497 h Cutting hours: 37,808 h Dimensions & Weight Dimensions (L x W x H): 4,890 x 4,370 x 2,137 mm Machine weight: 11,500 kg Note: No tools included, special transport required.

Condition: excellent (used), Heidelberg Cylinder 56 x 77 Kedpfswzyg Hox Aarjlt

Condition: ready for operation (used), A die-cutting and embossing machine Woschnik + Partner is available. Stroke rate: 9000/h, max. sheet dimensions X/Y: 820mm/1130mm, min. sheet dimensions X/Y: 360mm/400mm, gripper margin adjustment: 10mm-17mm, closing frame dimensions X/Y: 820mm/1134mm, max. die-cutting dimensions X/Y: 800mm/1120mm, cutting rule height: 23.8mm, max. punching force: 4000kN. Machine dimensions X/Y/Z: approx. 8000mm/2650mm/2950mm, weight: approx. 30000kg. Documentation available. An on-site inspection is possible. Kjdpfx Aasyn Nzforolt

Condition: good (used), Year of construction: 1979, total height: 1,750 mm, total width: 800 mm, total length: 1,200 mm, sheet thickness steel (max.): 3 mm, working range: 960 mm, overall weight: 750 kg, power: 0.37 kW (0.50 HP), Copy nibbler PIONIER KNA 600, steel capacity 3 mm, circular nibbling up to Ø 1000 mm, throat depth 600 mm, throat height 90 mm, motor 0.3 kW, stroke 0-12 mm, dimensions 1400x800x1750 mm, weight 400 kg Kledeyq Sc Dspfx Aarst

Condition: good (used), Year of construction: 1979, total height: 1,805 mm, total width: 1,700 mm, total length: 2,090 mm, sheet thickness steel (max.): 3 mm, working range: 960 mm, overall weight: 1,200 kg, Copy nibbling machine PIONIER K 1200/6, steel capacity 6 mm, circular nibbling up to Ø 500 mm, throat depth 1220 mm, throat height 200 mm, working length 960 mm, motor 1.3 / 2.2 kW, stroke 10 mm, dimensions 2090x1400x1800 mm, weight 1200 kg, operating manual Ksdpfx Aeyq Savjarelt

Condition: used, Year of construction: 2015, Working hours machine: 31888 (17.01.2024) h Working hours laser on: 19090 (17.01.2024) h Klsdpfjypt R Hsx Aarot Working hours beam on: 6475 (17.01.2024) h Laser power: 4000 Watt Max. punching force: 300 kN Control: AMNC 3i Working range laser: 2500 x 1170 mm Working range punching: 3050 x 1525 mm Length: 7870 mm Width: 5880 mm Height: 2666 mm Electrical connected load: 85 kVA x-axis: 100 m / min y-axis: 80 m / min Weight of machine approx.: 30000 kg Standard configuration - Patented servo-electric double drive- Punching force 300 kN- 32 tool stations (4 rotatable stations)- max stroke rate: 400- max material thickness 6mm- Automatic focus adjustment- Automatic gas pressure control- HS sensor cutting head- Nozzle cleaning- Splash guard- Good parts flap Extended machine accessories - TSU tool changer 300 Automation

Condition: good (used), Year of construction: 2001, Guillotine Boschert EL300 AMADA tool system Klodpfx Aodnny Roarjt tool station D diameter 88.9 mm New tool adapter A / B / C station Punching power: 280 kN (28 tons) Punching arm RADIUS 350 mm Side stop 500 mm right/left Depth gauge with digital display Page attacks new, Weight 2300 kg

Year of construction: 1992, condition: ready for operation (used), functionality: fully functional, overall weight: 7,000 kg, punching force: 20 t, table length: 2,450 mm, table width: 1,200 mm, machine/vehicle number: 24550616, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obligates timely collection, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Kledpoym Nlzofx Aaret Punching force: 200 kN Table dimensions: 2,450 x 1,200 mm MACHINE DETAILS Connected load: 11 kVA Dimensions & Weight Dimensions (L x W x H): 3,000 x 3,000 x 1,900 mm Weight: 7,000 kg EQUIPMENT Various punches Punching tool External reference: CES - Lot 107

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 41,830 h, machine/vehicle number: A0230A2043, laser type: CO₂ laser, laser hours: 23,313 h, laser power: 6,000 W, power: 120 kW (163.15 HP), input voltage: 400 V, input frequency: 50 Hz, compressed air connection: 10 bar, Equipment: documentation/manual, dust extraction, safety light barrier, We offer this used TRUMPF TruLaser 5030 laser cutting machine, year of manufacture 2007. Laser power: 6000 W Year of manufacture: 2007 Supply voltage: 400 V Frequency: 50 Hz Connected load: 120 kVA Control voltage: 24 V Protection: 3 x 160 A Compressed air connection: 7-10 bar Nitrogen connection (N₂): 30 bar Klsdpfx Aoyqulzjarjt Oxygen connection (O₂): 20 bar If you have any questions or require additional information, please send us a message or contact us by phone.

Condition: used, Year of construction: 2011, Punching machine Boschert Type: compact 500 cnc, year of manufacture 2011 Kljdpfx Aeymxwysarjt

Condition: used, Year of construction: 2001, Punching machine Manufacturer: Trumpf • Machine type: Trumatic 500 • Year of manufacture: 2001 • Power-on hours (counter 1): 81,174 h (as of 03.02.2026) • Operating hours, punching head on (counter 2): 45,972 h (as of 03.02.2026) • Klodpfsymxt Iox Aaret

Condition: used, Year of construction: 2011, EUROMAC MTX FLEX6 Klodpfxjynkqze Aarst

Condition: used, 5-fold combined profile steel shears PEDDINGHAUS type 210 AD/13 Machine. No. 529A059 Year of manufacture approx. 1970 Punching machine: Punching force 60 ton. Punch stroke 25.5 mm Punching capacity Ø 25 mm in 16 mm sheet metal Ø 20 mm in 19 mm sheet metal throat depth 365 mm Kljdpfx Aei Duh Isaret Bar steel shears: Cutting capacity Round 42 mm Square 38 x 38 mm Flat steel shears: Cutting capacity with shearing angle 5° 150 x 13 mm or 200 x 10 mm Blade length 245 mm Profile steel shears: Shearing capacity angle steel at 90° 110 x 10 mm Shearing capacity angle steel at 45° 90 x 9 mm T-steel 110 x 10 mm Notching device: Rectangular notcher up to 12 mm sheet metal Punch dimensions 85 x 50 mm Motor power 3 kW Mains connection 380 Volt, 50 Hz. - Center punch detection device via hand lever and centering device - Mechanical stroke release via hand lever - Flat steel shears equipped with 2° blade - Mechanical hold-down device on the profile steel shears, bar steel shears and flat steel shears Space requirement L x W x H 1500 x 800 x 1900 mm Weight 2000 kg good condition

Condition: used, Pneumatic press, compressed air press BOSCH type Manufacturer no.: Year of manufacture: 1980 Pressing force: 18 kN = 1.8 t at 5 bar 15 kN = 1.5 t at 4 bar 12 kN = 1.2 t at 3 bar 8 kN = 0.8 t at 2 bar 6 kN = 0.6 t at 1.8 bar Throat depth: 100 mm Kjdpjh U Dtujfx Aarjlt Ram stroke: 70 mm Table size: 245 x 200 mm Ram face: Ø 45 mm Max. installation height: 235 mm Clamping pin bore: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force infinitely adjustable via pressure regulator - Pneumatic cylinder with ram adjustable in height by 90 mm - Pneumatic dual-hand control - Mounted on a metal frame with wooden boards Required floor space (L x W x H): 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight including table frame: 140 kg In very good condition

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, Options: ACB, BendGuard for manual bending, HQ version, interface to 2nd machine Klsdowykccjpfx Aarst

Year of construction: 2013, operating hours: 84,545 h, condition: ready for operation (used), General Data Machine weight 17500 kg Main Drive Punching force 220 kN This TRUMPF TRUPUNCH 5000 S10 was manufactured in 2013. It features a Siemens Sinumerik 840D control system, a working area of 3050x1550 mm, and a punching press of 220 kN. Capable of handling sheet weights up to 280 kg and thicknesses up to 8 mm, it includes a Linear ATC for 21 tools and additional options like MULTITOOL and ENGRAVING. Regularly maintained and in good condition. Contact us for more information about this machine. Kledpfx Ajx D Nwwsarjt Application Types Punching