Used Ursviken Optima 400 5.1/4.37 for sale (19,333)

Year of construction: 1999, condition: reconditioned (used), Machine is currently undergoing overhaul PROCESSABLE MATERIALS Depending on material properties and sheet configuration: · Paper with a minimum grammage of 80 gsm · Cardboard or solid board up to a grammage of 2,000 gsm · Corrugated board up to a total thickness of 4 mm (max. sheet curvature 4%) PERFORMANCE DATA Max. sheet format: 820 x 1,130 mm Min. sheet format: 350 x 400 mm Max. cutting force: (400 t) 4.0 MN Max. machine speed: 9,000 sheets/h Standard equipment of the machine: Feeder Non-stop high-performance sheet feeder W3 equipped with: • Automatic non-stop device • Automatic pallet changeover • Suction head • Double-sheet detector • Motorized stack side correction • Motorized suction head adjustment • Conveyor table with pneumatic cover frame • Compressed air and vacuum pump Register Table • Operator-side side lay, switchable between pull and push mode • Light sensor for accurate side alignment of sheets • Fine adjustment of the side lay • Two active front lays with light sensor for register control • Two inactive front lays for sheet stabilization • Separate fine adjustment of gripper edge for drive and operator side • LED display for accurate front and side lay registration • Trend display for sheet detection • Sheet rejection, disabling only the feeder • Height-adjustable top lay for positive sheet guidance Die-cutting station • Roller-guided support rails for the chase • Roller guide for die-cutting plate on swing-out support arms • Motorized die pressure adjustment • Automatic device for lifting the chase to the platen • Electronic die-cutting force display with max. pressure limitation • Vacuum device in sub-table for thin cutting plates Stripping Unit • Frame drive and frame lift for upper tool frame • Mount for the stripping board with centerline fine adjustment • Device for sample sheet removal • Upper tool frame • Lower tool frame Delivery • Fully automatic pile stacker, pre-selectable • Counted sub-stacks with automatic insertion of uncut sheets • Can form sub-stacks (interleaved sheets between 250 gsm – 800 gsm) • Frame lift for upper tool frame • Mount for change frames with electric adjustment in running direction • Pneumatic frame locking • Switchable gripper opener cam and sheet ejector • Sheet jogging device • Integrated conveyor belt for gripper edge or waste grid removal (double-cut) • Separator sheet magazine with electronic level control, refillable from B-side during production • Tool frame with centerline • Change frame for standard pile delivery / gripper edge removal • Change frame for blank separation grid • Mounting kit for separation punch • 8 x sheet hold-downs for standard pile delivery • 4 x cross support bars Options: • QTM – Patented guide rails • QTM – Chase with quick lock system and X/Y adjustment Gjdpfjyuuzdox Afuokc • QTM – Upper stripping frame with quick lock system • QTM – Upper delivery frame with quick lock system • Control upgrade to latest Siemens S7 controller • New generation frequency converters • Modem for remote service connection • Machine height increase: 900 mm

Condition: used, overall weight: 221 kg, total length: 400 mm, total width: 400 mm, total height: 540 mm, Cross tooling column with Gressel Mounting holes 4 Pitch fixing holes 320 mm Length 400 mm Width 400 mm Height 540 mm Weight 221 kg Gksdpfxoywy U No Afuoc If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: reconditioned (used), Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Control Memory-Funktion Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled ----- This machine is currently being refurbished at our facility! Pictures taken before dismantling and currently during the processing phase! Gksdpsyy A Iqjfx Afujc Brief Summary: ----- - 5 spindles with 8,000 rpm - 4 x HSK/Powerlock - Axially and radial CNC adjustments of the spindles via control - CNC-controlled adjustment and positioning of the feed - Table tops with guide blades at spindles 2 and 3. - Includes Weinig/Neumann RF 15 return conveyor system Detailed Description: ----- Technical Data: Working width: 20-230 mm Working height: 8-120 mm 1st tool holder - bottom ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 93 - 145 mm Axially travel: 5 mm Folding device MarathonCoatin for table insert in front of 1st lower Tool Holder 2nd Tool Holder - PowerLock - Right ----- Motor with brake: 7.5 kW Shared motor with left tool holder Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. tool diameter behind stop plane: 180 mm Max. groove depth: 35 mm Axially travel: 55 mm Spindle: CNC controlled axially Table tops with guide blades 3rd Tool Holder - PowerLock - Left ----- Motor with brake: Shared motor with the 2nd spindle Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter 40 mm below table level: 93 - 180 mm Table surface: 93 - 200 mm Tool swing diameter 55 mm below table surface: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. groove depth: 35 mm Axially travel: 55 mm Spindle axially and radially CNC controlled Table tops with guide blades 4. Tool holder - PowerLock - top ----- Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Tool swing diameter for straight cutter heads max.: 180 mm Max. groove depth: 35 mm Axially travel: 40 mm Split pressure shoe in front of upper tool holder, adjustable and pivoting away from the tool, spring-loaded. Pressure shoe in front of, and discharge after, the upper tool holder with electronic digital displays, integrated into memory functions CNC-controlled radial spindle 5. Tool holder - PowerLock - bottom ----- Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Max. throat depth: 15 mm Axially travel: 35 mm Feed system ----- Frequency-controlled feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller in front of the first lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers (Weinig patent) wi...

Condition: new, Year of construction: 2026, machine/vehicle number: 20260228006, fuel type: diesel, motor manufacturer: Perkins 2206C-E13TAG2, General information Field of application: Construction Godpfx Afeyy Uafoujkc Weights Empty weight: 4.550 kg Functional Generator capacity: 400 kVA Dimensions of cargo space: 416 x 160 x 215 cm CE mark: yes Other information Fuel consumption: 58 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A46H Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 580 l Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: good (used), Year of construction: 2016, lifting height: 38,260 mm, fuel type: diesel, Weights Empty weight: 16.100 kg Functional Lifting capacity: 600 kg Working height: 4.026 cm Dimensions of cargo space: 974 x 253 x 378 cm Condition Technical condition: good Visual appearance: good Other information TÜV Marked: yes Delivery terms: EXW Max. horizontal reach: 3108 m Max swing of platform in degrees: 250 Gkjdpfjyvzy Dox Afuec Additional information Please contact Christian Theißen for more information Manufacturer: Ruthmann Model: T 400 Year of build: 2016 Condition: Used Data: Max. working height: 40,26 m Max. platform height: 38,26 m Max. reach: 31,08 m Total dimensions LxWxH: 9,74 x 2,53 x 3,78 m Platform dimensions LxW: 2,41 x 0,97 m Max. basket load: 600 kg Swivel range: 250° Ground clearance: 0,22 m Support width both sides: 6,60 m Support width one side: 4,77 m Support width: narrow 2,86 m Support length: 6,37 m Ground pressure: 150 kN Driving license category: C / 2 Empty weight: 16.100 kg Total permissible weight: 18.000 kg Special features: Tilt 2°, Rotatable work basket 2x 90° (hydraulic), Basket arm, Rotation angle 180°, WITHOUT roof protection, Loading area with side panels, Telescopic basket arm allows working over obstacles, Computer-assisted stabilizer automation, PPE attachment points available, Material box 1.81 x 0.81 m. Information: TÜV and UVV new

Condition: new, neu Bulgarien 42910 € 819.58 € 400 mm 750 mm 200 mm 52 mm 235 mm 320 mm 6 6 MK 4 18-98; 48-265; 144-790; 3 U/Min 80 0.015 - 0.6 mm/U 0.0075 - 0.3 mm/U Gjdpfx Asyq Stijfujkc 40 0.25 - 7.5 mm 120 - 4 Gänge/" 0.0625 - 1.875 235 mm 110 mm 50 mm 4 MK 100 mm 7.5 kW 1530 kg driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 1.000 mm € 43.630,-

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 620 mm, travel distance Z-axis: 2,000 mm, bar diameter (max.): 110 mm, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 3, Horizontal turning machine manufactured in 2007. This BOEHRINGER VDF 400 CM features a 500 mm chuck and a live tool for enhanced versatility. It offers an impressive X-axis travel of 620 mm and Y-axis travel of 2000 mm. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER VDF 400 CM machine we have for sale. Contact us for further details. • Chuck diameter: 500 mm Gkjdpfx Afszzp Aueusc Technical Specification Driven Tools Yes Counter Spindle No

Condition: used, Year of construction: 2007, Technical details: Gkedpfx Ajzzvx Ajfujc swing diameter: 400 mm turning height: 950-1500 mm Turning length: 210 mm x-travel: 310 mm z-travel: 350 mm spindle turning speed range: 20-3500 U/min weight of the machine ca.: 11 t dimensions of the machine ca.: 4,5 x 3,5 x 2,7 m

Condition: used, Travel ranges: x 400 mm y 375 mm z 250 mm Table size 200 x 800 mm Spindle speeds 50 - 3150 rpm Gksdpszzxfrsfx Afuoc Tool holder SK 40 Spindle quill travel 50.0 mm Rapid traverse rate 2.4 / 1.6 m/min Control system: Philips Dimensions L-W-H 1860 x 1790 x 1750 mm

Condition: used, mileage: 668,726 km, power: 294 kW (399.73 HP), first registration: 12/2014, fuel type: diesel, tire size: 315/80 R22.5, axle configuration: 6x4, wheelbase: 5,500 mm, fuel: diesel, brakes: engine braking, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, total length: 9,800 mm, total width: 2,550 mm, total height: 4,050 mm, Year of construction: 2014, Equipment: central locking, cruise control, electric window regulation, power mirror, soot filter, = Additional Options and Accessories = - CD player - Aluminum fuel tank - Refrigerator - Particle filter - Rear view camera - Headlights - Visor - Tool kit = Additional Information = Axle configuration Tire size: 315/80 R22.5 Brakes: Disc brakes Suspension: Leaf spring suspension Front axle: Steerable; Tire tread depth left: 4 mm; Tire tread depth right: 4 mm Rear axle 1: Dual tires; Tire tread depth left inner: 7 mm; Tire tread depth left outer: 7 mm; Tire tread depth right inner: 7 mm; Tire tread depth right outer: 7 mm Rear axle 2: Dual tires; Tire tread depth left inner: 6 mm; Tire tread depth left outer: 6 mm; Tire tread depth right inner: 6 mm; Tire tread depth right outer: 6 mm Weights Unladen weight: 12,100 kg Payload: 13,900 kg Gedpfxozxlg Dj Afujkc GVWR: 26,000 kg Condition Damage: None

Condition: excellent (used), Panel Beam Saw - With rear lifting table Numerical Control POWER CONTROL V2.1 (Power TOUCH) Software CADmatic 5 Cross-chains for transporting panel packs in the lifting table Lifting scissor table (mm) 4300 x 1600 Rear pushers (N.) 1 with clamps / grippers 12 Turning device (rotating unit) at 90° Max. cutting width (mm) 4300 - Useful stroke of the pushing system (mm) 4300 Max blade projection (mm) 125 Scoring Unit (max saw diameter / power) mm 180 / Kw 2,2 Main Sawing Unit (max saw diameter / power) mm 450 / Kw 28 Adjustable speed of the saw carriage (m/min) 1 - 150 Front supporting tables with Air blowing system (N.) 4 (3 x 2160mm x 650mm + 1 x 2160mm x 800mm) Total power (Kw) OPTIONAL: 200062) Automatic unloading system for cut panels and stacking system AUTOMATECH ROBOTECH with Robot KUKA Mod. KR 470-2 PA Gedezxn Ecspfx Afuokc

Condition: excellent (used), mileage: 810,337 km, first registration: 05/2013, fuel type: diesel, tire condition: 50 %, axle configuration: 6x2, fuel: diesel, color: silver, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, number of seats: 2, Year of construction: 2013, Equipment: ABS, crane, = Additional options and accessories = - Cabin - PTO - Sun visor = Remarks = Crane Remote control: ✓ Load Hook: ✓ Rotator: ✓ MAN TGX 26/400, 6x2 box truck with Palfinger 34 tm crane! In addition to those already mentioned, it features: -Palfinger 34tm crane with REMOTE CONTROL -3x hydraulically extendable -6x2 with steered and liftable trailing axle -Air conditioning -Euro 6 -catching mouth -2 beds -etc etc Beautiful German truck!! Optionally available with a matching trailer!! = More information = Axle configuration Tyre profile: 50% Front axle: Steering Rear axle 1: Double wheels Rear axle 2: Steering Weights Empty weight: 16.170 kg Carrying capacity: 9.830 kg GVW: 26.000 kg Functional Crane: Palfinger PK 34002 SH-B, year of manufacture 2013 Layout Number of beds: 2 Condition Technical condition: very good Visual appearance: very good Damages: none Financial information Price: On request = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands Godpszuc Eiefx Afuekc And reach us at: Trucks: Passenger cars: Website: Email:

Condition: used, all stainless steel belt width 400 mm mobile adjustable speed filling capacity 27 L weight: 390 kg dimensions (l x w x h): ± 2.860 x 750 x 1.450 mm Gjdpfx Afoz Ait Nsuokc With adjustable take-over outfeed conveyor

Condition: used, Year of construction: 1991, functionality: fully functional, conveyor belt width: 500 mm, pressing force: 400 t, DGUV certified until: 07/2027, year of last overhaul: 2017, sheet thickness steel (max.): 7 mm, Edelhoff DARRW 2/400 – 400-ton pressing system with ALBA strip feeding system For sale is a complete mechanical pressing system, manufactured by Gebr. Edelhoff, type DARRW 2/400, manufactured in 06/1991, with an ALBA strip feeding system, coil unwinder, straightening unit, roller feeder, modernized Siemens SIMATIC control system, UNIDOR process monitoring, and MFP Z-conveyor, manufactured in 2025. The system is installed and can be inspected and demonstrated after prior appointment. Technical data of the press: Manufacturer: Gebr. Edelhoff Werkzeugmaschinenfabrik Type: DARRW 2/400 Year of manufacture: 06/1991 Machine No.: 9131 Design: mechanical twin-column stamping press Pressing force: 400 Mp / approx. 4,000 kN Table size: 1,100 × 1,500 mm Stroke adjustment: 40–120 mm Ram adjustment: 120 mm Stroke rate: 20–80 strokes/min Motor power: 45 kW Electrical system: 380 V Control system / process monitoring The machine control system has been modernized. Equipment includes: Siemens SIMATIC control system UNIDOR process/pressing force monitoring with visualization Screen-based operation Separate main control panel Additional machine-side control panel Integration of the strip feeding system into the system control Extensive switching and control technology ALBA strip feeding system Complete strip feeding system with several ALBA components, consisting of: Coil unwinder Coil holder with spreading mandrel Hold-down / guide arms ALBA straightening unit ALBA roller feeder Separate control unit for the strip feeding system Technical data of the strip processing: Strip width: max. 500 mm Material thickness: max. 7 mm Material cross-section: max. 1,800 mm² Strip speed: up to 25 m/min 2 transport rollers 8 straightening rollers Year of manufacture of ALBA components: 1991 The strip feeding system consists of several ALBA units with separate nameplates. Part removal MFP Z-conveyor Year of manufacture: 2025 Automatic part discharge from the pressing area Modernization / overhaul The pressing system underwent extensive overhaul in the years 2017–2019. The documented costs for the overhaul amounted to approximately €92,000. In addition, the system was equipped with an MFP Z-conveyor, manufactured in 2025. Inspection The press was last inspected on 07.07.2026 according to DGUV Information 209-030. Condition / Inspection The complete system is currently installed at the production site. Inspection and demonstration under production conditions are possible after prior appointment. Dismantling, relocation, and reinstallation Upon request, in addition to the machine sale, we offer the complete technical handling of the relocation: Professional dismantling of the system Preparation for loading and transport Relocation to the new production site Reinstallation and assembly at the destination Further services according to individual agreement The scope of services can be individually agreed upon and offered according to the buyer's requirements. Financing Gsdpfx Ajzv Ukgofuokc If the buyer has sufficient creditworthiness, a financing solution can be offered or arranged for the acquisition of the system. Details, term, and conditions will be determined after individual assessment and agreement. Further technical documents and information are available upon request. Technical data provided to the best of our knowledge and according to the available machine documentation or nameplates. Subject to errors and prior sale.

Condition: used, belt width 400 mm all stainless steel adjustable speed Gkjdpfozza Afjx Afuec with lower and upper belt adjustable upper belt with infeed belt mobile dimensions (l x w x h) : ± 2.500 x 800 x 1.200 mm

Condition: used, all stainless steel hopper capacity 270L die width 400 mm usable die surface 370 x 130 mm maximum volume per stroke ± 1,47 kg maximum 50 strokes / minute (Depending on the product, shape, temperature and machine settings) Gkedpfx Aezzb Sbsfujc total power 8 kW air consumption ± 300 L / min. mobile variable speed 3x400v 50hz dimensions (l x w x h) : ± 3.140 x 1.900 x 2.570 mm weight 1200 kg PLC control

Condition: refurbished (used), HEINEMANN DN 400 TV 16 CNC LATHE DISTANCE BETWEEN CENTERS: 4500 MM MAX. SWING OVER BED: 870 MM MAX. SWING OVER CROSS SLIDE: 610 MM SPINDLE SPEED: 1400 RPM SPINDLE BORE: 130 MM AUTOMATIC TURRET: 12 STATIONS Gkjdpfozzdvpox Afuoc SPINDLE MOTOR POWER: 85 KW MACHINE COMPLETELY OVERHAULED AND RETROFITTED CNC CONTROL: SIEMENS EQUIPPED WITH AUTOMATIC STEADY REST IN CYCLE

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 420 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, table load: 500 kg, OPS INGERSOLL GANTRY EAGLE 400 Year of manufacture: 2015 Completely overhauled August-September 2026 EAGLE Powertec PC/NC control system 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn rapid programming Powertec handheld multifunctional operating device Manual eroding with Powertec handheld EAGLE Powertec - fine finishing generator PT 60, 60 Amperes (60 Amperes peak current) High-speed jump max. 18,000 mm/min Gjdpfxsz Azk He Afuekc Travel distances (X, Y, Z) 420 x 300 x 300 mm Linear measuring system in all axes Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer, 20-position pick-up magazine Work tank (W x D x H) 650 x 500 x 340 mm Work table (W x D) 550 x 470 mm Load capacity 500 kg Overhang load 200 kg Machine dimensions W x D x H 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: CO2 fire extinguishing system The machine is currently undergoing overhaul. Original pictures will follow. 09/30.

Year of construction: 2019, condition: excellent (used), input voltage: 400 V, machine/vehicle number: 3365, BVL Yukon DAK-2 BL 500/400/4000, year of manufacture 2019, machine no. 3365. Two-track continuous washing system for aqueous cleaning and degreasing of shafts, followed by drying. The two washing tracks are separated by a partition and each has its own washing tank. The parts are cleaned on each track and then blown off/dried. The system was designed for integration into a production line with an on-site pallet conveying system. Technical data: - Two washing tanks, each with a capacity of 1,000 liters - Electric tank heater: 2 x 45 kW - Documented washing temperature range: 45-60 °C - Washing pumps: 2 x 4.0 kW; spray pressure 3.0 bar each - Coarse filter: 1 mm; bag filter: 50 µm per washing circuit - Usable length: 250 mm; usable width: 2 x 250 mm; usable height: 400 mm - Control system: Siemens SIMATIC S7-1500, CPU 1513-1 PN - Operator panel: Siemens TP700 Comfort - Operating voltage: 3 x 400 V, N+PE, 50 Hz Equipment: - Unheated drying with side-channel blower and blow-off fan per track - Automatic cleaner dosing and concentration monitoring via Libelle Cleaner Control - Condenser - Automatic cleaning of the blow-off zone - Nozzle system with quick-release fittings - Four viewing windows with internal lighting - Control panel on the support arm system Transport/installation dimensions according to the layout plan: 4,000 x 2,000 x 2,938 mm (L x W x H). Technical documentation available, including operating manual, layout plan, electrical and pneumatic diagrams, maintenance documents, spare parts lists and PLC project archive. Location: Waldmohr. Condition: very good (used). Gjdpfxjz A Eids Afuskc Price on request. Internal reference: 781461. Technical data according to available manufacturer documentation.

Year of construction: 2019, condition: good (used), LEMORAU MEBR+ 400 Digital Label Finishing & Die-Cutting Machine - 400 mm | Full Rotary & Semi-Rotary | Flexo Varnishing | Turret Rewinding | Approx. 700 Die Sheets Semi-rotary operation offers excellent flexibility for short runs and frequent job changes, while full rotary production enables considerably higher speeds for longer production runs. This particular machine features a comprehensive configuration, including two rotary flexographic spot-varnish units, corona treatment, web cleaning, turret rewinding, and the high-speed semi-rotary Speed Pack. An additional highlight is the extensive tooling package with approximately 700 die sheets, representing significant added value for the future owner. _____ MACHINE DETAILS Manufacturer: LEMORAU Model: MEBR+ 400 Year: 2019 Gsdpfoz Ea I Tox Afuokc Machine type: Digital Label Finishing & Die-Cutting Machine Maximum web width: 400 mm / 16" Operation: Full Rotary & Semi-Rotary Application: Digital and conventionally printed labels / self-adhesive materials _____ PRODUCTION SPEED Full Rotary Mode • Maximum speed for blank labels: 200 m/min • Maximum die-cutting speed in register: 120 m/min Semi-Rotary Mode • Standard semi-rotary speed: up to 40 m/min, depending on die / repeat • Equipped with Speed Pack • Semi-rotary production speed up to approximately 80 m/min, depending on application and tooling This combination makes the machine suitable for both short-run digital finishing and considerably longer production runs. _____ DIE-CUTTING SYSTEM The MEBR+ combines rotary and semi-rotary die-cutting in a single machine. Rotary Die Repeats 203.20 – 431.80 mm / 8 – 17" Semi-Rotary Die Repeats 41.30 – 371.00 mm / 1.6 – 14.6" The semi-rotary system significantly reduces tooling requirements for shorter jobs, while full rotary operation provides higher productivity for longer runs. Tooling Included A particularly important advantage of this machine is the extensive tooling package: Approx. 700 die sheets included This represents considerable additional value and can substantially reduce future tooling investment. _____ 2 x FLEXOGRAPHIC SPOT VARNISH UNITS The machine is equipped with: 2 x Rotary Flexographic Spot Varnish Units Suitable for: • Spot varnishing • Protective coatings • Decorative varnishes • Special label finishing applications • Additional surface enhancement The flexographic units considerably increase the versatility of the machine and allow additional finishing operations to be integrated directly into the production process. _____ CORONA TREATMENT The machine is equipped with a corona treatment system, providing improved surface treatment for demanding substrates. Particularly useful for: • Film materials • Synthetic substrates • Improved coating adhesion • Improved varnish adhesion _____ WEB CLEANING SYSTEM Integrated web cleaner for removing dust and contamination from the material before further processing. This can contribute to improved finishing quality and more consistent production results. _____ WEB GUIDING & TENSION CONTROL The MEBR+ offers sophisticated web handling technology.

Condition: good (used), Koppens PR400 Breading Machine The Koppens PR 400 breading machine is ideal for food companies looking to optimize the breading process for their products. Thanks to its robust design, this machine ensures even and uniform breading, guaranteeing consistent quality for every product processed. In fact, it is perfectly suited for fine breading, meeting the exacting requirements of the meat, fish, and other food processing industries. Gkedpfez Aqywjx Afuec Furthermore, the Koppens PR 400 offers remarkable flexibility with its adjustable speed and working height, enabling parameters to be adjusted according to specific production needs. With its 400 mm wide belt, it facilitates the continuous processing of large quantities of product, increasing production line efficiency. Moreover, its stainless steel design ensures long life and impeccable hygiene, which is essential in food environments. Finally, this breading machine is easy to integrate into existing production lines, offering a complete solution for optimizing the breading process while guaranteeing high-quality results. In short, the Koppens PR 400 is an essential choice for improving the productivity and quality of breaded products. Manufacturer: Koppens Model: PR400 Belt width: 400 mm Capacity: Max. 1,000 kg/h (depending on the product) Power: 0.9 kW / 50 Hz Machine dimensions L x W x H: 3,150 x 800 x 2,050 mm Machine weight: 300 kg.

Condition: used, Technical details: welding current: 400 A Length: 590 mm height: 430 mm connection voltage: 400 V open-circuit voltage: 50 V capacity in kVA: 18,5 KvA protection class: IP23S weight of the machine approx.: 47 kg dimensions L x W x H: 0,60 x 0,23 x 0,45 m The Kemppi FastMig KMS 400 is a powerful, industrial-grade MIG/MAG welding power source designed for professional use in workshops, metal fabrication, mechanical engineering, as well as manufacturing and maintenance applications. Gsdpfx Asz Dt Taofuekc In combination with a Kemppi FastMig MSF wire feeder, the KMS 400 forms a modular welding system. The MSF wire feed units are microprocessor-controlled, providing precise and reliable control of the wire feed. Depending on the control panel installed, the system supports conventional MIG/MAG welding as well as synergic welding functions. *

Condition: ready for operation (used), Year of construction: 2005, number of axes: 4, This 4-axis INGERSOLL Gantry 400 was manufactured in 2005. It features a main voltage of 400 V and operates at a frequency of 50 Hz. The machine is equipped with a Multipulse64 control system, ensuring precision in die-sinking applications. If you are looking to get high-quality die-sinking capabilities, consider the INGERSOLL Gantry 400 machine we have for sale. Contact us for further details. • Control system: Multipulse64 • Electrical specifications: • Main/operating voltage: 400 V (3-phase) Godpfjz Dv I Tsx Afuokc • Frequency: 50 Hz • Control voltage: AC / 24 V DC • Current consumption/power input: 15 A • Max. backup fuse: 25 A

Condition: good (used), Spark trap, spark pre-separator for ventilation ducts, chip extraction, dust extraction, extraction system, ventilation ducts and fittings Gkjdpfx Asz A Thnsfuoc -Spark trap: with copper lamellae -Connection: Ø 400 mm -Dimensions: 680/510/H540 mm -Weight: 48 kg

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Ramp Features: - Loading ramp - 8x Lashing points - Loading angle 16° Net: €4,886.56 / Gross: €5,815.00 Article number: MBA335401800.01 Technical data: • Brand: Martz • Model: BAU-3 400/3 S • Vehicle type: Construction machinery trailer • Vehicle condition: New • First registration: No first registration • TÜV/HU: 2 years from first registration • Internal dimensions (LxWxH): 400 x 182 x 25 cm • External dimensions (LxWxH): 601 x 242 x 182 cm • Loading height of the floor: 34 cm • Permissible total weight: 3,500 kg • Tare weight: 755 kg • Payload: 2,745 kg • Chassis: Low loader (wheels beside the body) • Tires: 195/50R13C • Suspension: KNOTT rubber spring axle • Support wheel: Yes, automatic • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Robust steel fenders, walkable, with continuous safety anti-slip strips • Screen-printed wood floor, continuous without joints, slip-resistant and waterproof • Very stable steel frame, welded • Frame completely hot-dip galvanized • Steel loading ramp, standing on a shaft • Stable eccentric locking mechanisms • Insertion option at all 4 corners for tarpaulin frames, grid attachments, side extensions or front panel extensions • Robust support feet on the loading ramp • Lifting aid for the loading ramp • Very low chassis for a low loading angle • With bucket rest • 8x lashing points recessed in the frame profile (600dAN/kg), TÜV certified • Maintenance-free rubber spring axles from KNOTT • Reversing automatic • KNOTT drawbar coupling and parking brake • Very stable, bolted V-drawbar, REINFORCED • 13-pin connector Gksdpjzy Amkjfx Afuoc • Reversing lights • Large-dimensioned safety lighting • Rear position lights • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop! - Feel free to inquire about specific requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT. - Vehicle registration document can be sent in advance, or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair workshop for over 30 years. - Errors, omissions and prior sale excepted.