Used Variovac Primus Thermoformer for sale (228)

Condition: good (used), Surface grinding machine GEIBEL & HOTZ FS 40 Primus SA, No. 920287, clamping surface 400 x 200 mm Ppsdpfxjunw Ils Abyjt

Condition: used, Year of construction: 1999, turning diameter 150 mm turning length 500 mm Ppjdpfovm Dv Djx Abyot total power requirement 4 kW weight of the machine ca. 0,8 t

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, input voltage: 230 V, Bread slicer Treif Primus Fusion - Bread slicing machine Treif Maschinenbau GmbH - Under counter bread slicer - Model: Primus fusion - bread cutting machine - Cutting width adjustable from 5 to 14mm - 220- 230 V Pjdpfx Asvbc Hkobyopt - Year of construction 2020 - Machine weight: 230 kg

Condition: as good as new (ex-display), operating hours: 50 h, Uhlmann thermoform packaging system UPS 4 ETX for processing PVC forming film and aluminum lidding film Basic machine in modular technology and balcony construction, with 12 modules: - Molding film holder with 2 pneumatic clamping shafts for core diameter 76 mm, max. roll diameter 800 mm - Cutting and gluing table for shaped film - Shaped film unwinding, clocked - 3-zone contact heating: - 6 heating circuits, individually adjustable - Simultaneous heating of min. 3 feeds - Heating plates during machine stop automatic opening - Forming station with 4-column lifting table guide - Filling section, length 1,360 mm - Safety flap on the filling section Cover film unwinding on operating side with pneumatic expansion shaft for core diameter 76 mm, max. roll diameter 300 mm - Plate sealing station with 4 columns lifting table guide: - Integrated overload protection - Automatic lifting of the upper sealing sealing tool when the machine stops - Free module for the installation of an additional station - Clamping gripper feed Pedpfx Abjtndpzeyept - Punching station with blister lowering - Waste cutter with integrated motorized transport of the punching grid - Smoothing device - ET/DT perforating station - Monitoring of the compressed air supply with machine stop when the minimum the minimum value - Visio Scan - Electrically interlocked safety doors - Quick format change due to - plug-in format parts - Plug-in connections for cooling water supply - Main drive with frequency-controlled three-phase motor geared motor - Switch cabinet at the rear of the machine, swivel-mounted Paccontrol operating control - 10.4" TFT color display with 640x480 pixel resolution - Processor 68C030 - OS9 2.9 operating system - 2 MB SRAM, 2 MB Flash, 16 MB DRAM - SRAM card reader - IBM standard membrane keyboard - Centronics interface for external printer - PS2 interface for external keyboard - VGA interface for external monitor - Serial interface for diagnostic purposes - Arcnet interface - 8 serial interfaces for connecting devices Integrated shift register ISR Rejection of individual blister rows, e.g. overheated film in the heating station, products in the sealing station, etc. Machine control: Memory-programmable sequence control in modular design: - B&R - PLC control - Bus system with modules for CPU, inputs, outputs, temperature controller, cam controller, etc. - External program memory Technical data UPS 4 ETX: - Number of cycles: - ET range: min./max. : 15/ 50 T/min. depending on film quality, feed and format design - Format range: min./max. feed in filling area : 64/226 mm min./max. film width : 100/300 mm min./max. punching width : 28/284 mm max. drawing depth : 12 mm - Compressed air: - Inlet pressure: approx. 6 - 8 bar 4 Simtap feeders

Condition: used, Year of construction: 2019, functionality: limited functionality, machine/vehicle number: 1000033397, Pre-owned Primus 402 Waterjet 5 Axis with one cutting head, has served us for 4 years cutting stone and ceramic benchtops, delivers great cutting capabilities across a wide range of materials, including stone, ceramic, metals, glass, and more. Key Features: - Pioneer Technology: Maximum programming flexibility thanks to the free movement of the cutting head. The 5-axis cutting head is fitted with the patented Intermac infinite rotating C axis system for making top-quality tilted cuts (+/-60°) on complex profiles, with no limits. - Versatile Performance: Primus offers the possibility to process a wide selection of materials such as: natural stone, sintered materials, ceramic, metal, glass, and more. Ppjdpfx Ajytlb Sobyjt - User-Friendly Interface: Equipped with iCam Software making it easy to program and operate, even for intricate projects. Condition: - The machine was installed in September 2019 and decommissioned in September 2023. It was running well at the time of decommissioning, with only inaccuracy when cutting circles. Some maintenance may be required to restore it to peak performance, but it remains in good working condition and ready for immediate use in your factory. - The machine’s Probe and Head Rotation Calibration devices may need maintenance or replacement. These features were not critical to our operations and, therefore, were never used. - Decommissioning was carried out by a highly respected and professional Machine Technician in New Zealand, who can also commission the machine installation at your facility. Contact details can be provided upon request. - EXW from Auckland, New Zealand. This is a fantastic opportunity to own a high-performing waterjet at a fraction of the cost of a new model. Contact us today to learn more.

Condition: new, Year of construction: 2026, The Concept Eco and Concept Primus are the ideal assembly support for dowel construction at the case goods as well as drawer production. Short introduction: • With workpiece tolerance compensation (System GANNOMAT) • 2 Potentiometer for stepless adjustable pressing force • Pressing force min. 300/500 daN (kg) at Concept Eco resp. Pressing force min. 600/800 daN (kg) at Concept Primus Podedx R Dtepfx Abyept • Pressing force max. 2200 daN (kg) at Concept Eco resp. Pressing force max. 3500 daN (kg) at Concept Primus • 3 Pressing velocities and adjustment rates 5 /10 / 25 mm/sec. (with fine positioning / creep feed) • Adjustable clamping cycle time with automatic opening • Simple operation by 6 individual push buttons for 8 motion sequences

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 1126, film width: 540 mm, type of input current: three-phase, total width: 1,710 mm, total length: 3,070 mm, total height: 2,520 mm, overall weight: 838 kg, power: 1.9 kW (2.58 HP), Equipment: type plate available, Skinpack machine, packaging machine, thermoforming machine, vacuum forming machine -Manufacturer: Illig, skin pack machine type SK 74c -Foil width: 540 mm -Roller conveyors: each 1000 x 560 mm maximum -Work table: dimensions see photos -total Motor output: 1.9 kW -total Heating power: 8.9 kW -Dimension: 3070/1710/H2520 mm 838 kg Pedpfx Aoft Sccebyept -Accessories: incl. 8 foil rolls Ø290 x 540 mm 276 kg -Transport dimension: 1710/1070/H2520 mm / 1200/800/H700 mm -Total weight: 1114 kg + 500 kg foil

Year of construction: 1997, condition: excellent (used), Multivac R 230 MC Thermoformer Manufacturer: Multivac Model: R 230 MC Machine number: 179 Year of manufacture: 1997 Power supply: 400 V, 3 phases, 50 Hz Power: 15 kW Pjdpfxsx E Dpgj Abyopt Current consumption: 36 A Film width: 340 mm Tool format: (2×) 310 × 215 mm Overall machine dimensions: 5500 × 950 × 2000 mm Multivac film scrap suction unit, type: F-CEVF 3718-3 Suction unit dimensions: 600 × 700 × 1400 mm No vacuum pump No discharge conveyor The Multivac R 230 MC Thermoformer is a versatile and reliable machine designed for forming, packing, and sealing food products in both rigid and flexible film packaging. The machine enables the production of dual-cavity packs (2× 310 × 215 mm), ensuring high throughput and consistent packaging quality. The R 230 MC model is a proven solution for food processing facilities seeking a robust and efficient packaging system. The integrated film scrap suction unit improves workplace cleanliness and ergonomics.

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: F.24442.03.03, Unique opportunity for serial manufacturers Pedpfxjwpd Rro Abyopt We are offering you here an immediately available, top thermoforming linear system with automatic tool change, rotary table, powerful lower table with spindle drive, tool change station, maintenance platform, hotmelt extraction, heating enclosure, and many other special functions directly from the manufacturer FRIMO. The system was most recently used for the production of automotive door panels. The film itself was coated with hotmelt. The system can also be used for dispersion adhesives (adhesive on the carrier parts). Very large components are possible, forming area up to 800 x 2,000 mm. The maximum forming part height is 250 mm. Very fast cycle times of under 60 seconds are easily possible. The system was regularly maintained and was in operation up to its dismantling. Currently, the system is properly stored at our facility in Hungary. We have locations worldwide and can assist you directly at your site. We can deliver this system worldwide as needed, install it at your factory, train your personnel, and advise you in all technical matters. Any modifications and modernization are also possible. Just ask us with your individual project request!

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 9123, Year of construction: 2008, massive, rigid milling machine for large posts with a milling cutter that can be adjusted steplessly vertically manual feed 2.2 kW 400V motor Psdpjwhpk Ijfx Abyjpt 2,800 rpm milling cutter speed maximum milling cutter diameter 300mm profile mounted at an angle of 20°-90°-20° (according to the scale) maximum cut-out width 400mm (at an angle of 90°) maximum cut-out depth 110mm maximum profile height 190mm stepless milling height adjustment (handwheel and scale), adjustment range 0 - 100mm quick cutter change system pneumatic material clamping cooling and lubrication system

Condition: like new (used), Year of construction: 2019, operating hours: 9,710 h, functionality: fully functional, For sale: Intermac Primus 322 waterjet cutting machine. The machine was purchased new in September 2019. Main drive Number of heads: 2 (each with 3 axes) Table External length: 3210 mm External width: 5410 mm Height adjustment: 2150 mm Equipped with robust Intermac Primus OS control unit (Win 10 Enterprise 2016) and a high-pressure capacity of 3800 bar. The machine comes with a water purifier with a capacity of 600L/hour and a 1000L tank. Machine has 9710 production hours (utilization: 12%). Podsvpuvgspfx Abyspt The machine has been regularly and properly serviced, with invoices for spare parts available. The reverse osmosis system (purifier) has also been regularly serviced by an authorized service provider/seller—twice a year. Ideal for precision cutting with a working area of 3210 x 2000 mm. Total price (machine + purifier): €60,000 net EXW Cerna, Croatia.

Condition: like new (used), Thermoforming machine Stainless steel Compact and easy to use Up to 100 memorised programs Ppodpfx Ajxtp I Isbyst Up to 10 cycles per minute 055 m³/h Power: 9.5kW Voltage: 400V / 50Hz / 3phs

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Profile bending machine model 17-PB-00 by FUX, Austria, in excellent condition. Ppsdex Dq T Hjpfx Abyjt Dry processing (no oil), with hot-air heating, suitable for circular and arched PVC profiles for windows, doors and façade elements. The machine consists of three working stations as shown in the photos, forming a complete line for bending PVC profiles into circular and arched shapes. Application: bending of circular/arched PVC profiles Process: dry processing with hot air (no oil required) Three integrated working stations for profile heating, forming and handling In very good working order, ready for use in production Transport / shipping: Transport costs are borne by the buyer. Shipment will be arranged after consultation, in order to agree on the most suitable means of transport and method of dispatch. For further technical details, photographs or to arrange an inspection, please contact us by email.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 202-052, film width: 570 mm, type of input current: three-phase, pressure: 6 bar, total width: 25,800 mm, total length: 82,200 mm, total height: 22,800 mm, Thermoforming machine used,functional for PET,PS,PP. The machine is still in production mode, but is available immediately. Ppedpfx Ajrh E Ibjbyjt

Condition: refurbished (used), BANDSAW HEADRING Mod. 1300/SG-CFC - Cast iron structure with stabilizing treatment. -right hand design (cutt from right to left!) - Flywheel diameter 1300 mm. - Flywheel width 165 mm for maximum blade width of 180 mm. -Filled flywheels with special ribs to enhance mechanical characteristics, subjected to stabilizing treatment; shaped with double curve for the best stability on the table; perpendicular to the rotation of axis. - 55kW (75 HP) main engine, automatic star-delta starter, pulley, belts and brakes -chains for timber unload HYDRAULIC CARRIAGE CFC - 4 clamps for log centering - Maximum distance from blade to clamp 1000 mm. -Max opening of hooks 900 mm - COMPUTERIZED-Mudata control system - Continuously variable speed feed from 0 - 140 ml/min and exploits the power of the main motor to obtain a quality cut, hydrostatic design -4 turning logs chain systems - Control unit and seat, multi-function joystick and electric servo control !!!!! OPTIONAL !!!!! INSTALLATION..... 40,000 EUR EXCLUDING VAT, FOR A 1-YEAR WARRANTY Mechanization and unloading rollers Log ramp, length 4 m - 20,000 EUR + VAT Log loading arms on the log saw trolley, hydraulically operated with a single cylinder - 20,000 EUR + VAT Roller conveyor - EUR 20,000 + VAT - Length 7.60 m - Width 1.1 m - Rollers Ø 215 mm Ppsdpfoxzth Iox Abyet - Gear motor Second unloading roller conveyor - EUR 20,000 + VAT - Length 7.2 m - Width 1080 mm - Rollers 840 mm - Left/right chains - Own motorization These options significantly increase production flow, reduce downtime, and automate the log exit area. Advantages for industrial production - Complete line, fully reconditioned in 2025 - Excellent cutting stability thanks to cast iron construction - Extremely precise positioning with BRUSHLESS servo motors - High productivity and minimal maintenance - Ideal solution for factories wishing to modernize their cutting flow without investing in new equipment

Condition: used, Primultini surface planer with 400mm worktable, used Ppodpfeq R Af Aex Abyet

Year of construction: 1992, condition: excellent (used), E.Gillet vertical sawmill cutting line. Ppsdpfx Aji Egn Uobyet Wood feeder and receiver included. Maximum cutting length 6.5mb Very good condition.

Condition: repair required (used), PRIMULTINI 1400 headring and carriage Ppodpfxex Nf Sko Abyot

Condition: like new (used), Year of construction: 2012, operating hours: 75 h, This Vötsch Hephaistos Industrial Microwave Chamber has had extremely low hours usage during its life so far, on 75 hours .. having been installed and minimally utilized from time to time for a single research project at the University of Sheffield AMRC research department known as the “Factory of the Future”. Sold new for a price of approx 250,000.00Euro. Contact us now for an exceptional offer for this high tech unit in as new condition. VHM Hephaistos Industrial Microwave Chamber For Aerospace and Automotive Engineering The Research Project The VHM Hephaistos Industrial Microwave Chamber for component testing was developed in cooperation with the Karlsruhe Institute of Technology (KIT). It is the result of a joint development project sponsored by the German Federal Ministry of Education and Research (BMBF). Alongside KIT, the Composite Research Center of EADS in Munich, the Institute for Aircraft Design (IFB) at the University of Stuttgart, GNK Aerospace in Munich and Vötsch Industrietechnik were involved in the project. Microwave system The VHM Hephaistos Industrial Microwave Chamber from Vötschtechnik is an internationally patented system. Fast and energy-efficient production processes are possible by using microwaves. The microwave chamber is characterized by its hexagonal geometry with a very high field homogeneity. This is a major advantage when thermoforming fibre composites (CFRPs) in the aerospace and automotive industries. During the targeted volumetric heating of the products, the microwaves directly enter the material so that energy is delivered directly and the chamber does not require heating. This increases the heating rate and throughput, saving energy and time in addition. Reduced production costs This industrial microwave chamber guarantees you reduced costs due to shorter heating, process and cooling times required for curing CFRP components. Its material processing technology means the microwave can produce energy input into the component to be heated while the oven itself remains cold. In comparison to the process in autoclaves, the processing times are reduced by up to 50 %. Energy consumptions is reduced by up to 70%. Advantages: Possibility to use metal parts, such as conventional metal tools and feed systems, in the microwave field High degree of product quality thanks to the maximum homogeneity of the microwave fields provided by the hexagonal chamber structure. By using microwave absorbing materials, additional positive effects can be achieved Podpfx Abotvz Rfoyept Sizes from laboratory scale to large systems, e.g. as are required in the aerospace industry, can be achieved The modular design allows a flexible adjustment to your product Volumetric and selective heating for energy-efficient processes Precise heating of the products Hybrid systems, e.g. in combination with hot air

Condition: good (used), Tools / Moulds Multivac T300 Traysealer We have the following tools / moulds in stock for a Multivac T300 Traysealer: Traysize 227 x 178 mm (2 tools in stock) Traysize 278 x 187 mm Ppodeu Tczmspfx Abyjt Traysize 208 x 160 mm (for SKIN-packaging) Traysize 164 x 123 mm (1/8 gastro)

Condition: like new (used), Year of construction: 2016, pressing force: 400 t, passage width 2500 mm stroke 900 mm Total power requirement 62 kW machine weight approx. 27,5 t dimensions L x W x H approx. 3950 x 2200 x 4850 mm retraction force 40 t Main cylinder 2 pieces column diameter 220 mm installation height 1300 mm table size 2500 x 1600 mm ram size 3100 x 16000 mm table height above floor approx. 900 mm forward speed 200 mm/sec return speed 200 mm/sec working speed 5 - 15 mm/sec oil tank 1500 l oil quantity 1200 l pressure control adjustable from up to 50 - 400 t thermoforming cushion 1400 x 800 mm thermoforming unit capacity 30 - 60 t deep drawing cushion stroke 250 mm thermoforming cushion speed 5 - 80 mm/sec robust machine body with solid welded construction low maintenance and reliable piston rod with induction hardening and chrome plating Podpfjin Et Njx Abyept T-slots according to customer requirements, if not specified 22mm according to DIN CE certificate manufactured according to EU standards operating instructions, technical documentation, documentation in German language engineering steel LCG ASTM A36 T-slots in table and ram according to DIN 650-22 Travel control adjustable via monitor Light sensors front + rear: Sick 1300mm Hydraulic components Bosch Rexroth Monitor Siemens 12 inch Electrical control box for wall mounting Interior of the press illuminated with LEDs Hydraulic block monitored by safety PLC Energy control system: Reduction of the idle consumption of the pump to approx. 2 kw Remote control for remote maintenance Two-hand operation on movable stand Further information: Pressure build-up up to 400 T within max. 4 seconds after closing the die. Left side of the press closed by door 1000 x 800 mm with cross bars Ø 20 mm Right side of the press closed by door 1000 x 800 mm with cross bars Ø 20 mm Operation of the press can be manual, semi-automatic or fully automatic

Year of construction: 1973, condition: used, Illig UA100d Vacuum Forming Machine, Manual Loading of Material Sheets, Forming Area 960 x 560mm. Serial No. 2167 (1973). Country of Origin: Germany Location: These lots are located in Gateshead, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Ppjdpfxoy Shcqo Abyet

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, 1 x Packaging Automation Ltd inline sealing machine. Supplied with 3 x sets of tooling for different sized punnets and some spare parts. This unit was purchased new and run for 6 x months per year. Model – Eclipse SL4. Serial number – EC34-MC-00214. Date of manufacture – 2021. Maximum output - up to 75 packs/minute (with the 5x1 format tooling setup). Tooling: Tooling Set 1 - 5 x 1 format with arms. THERMOFORM 773 / ECSL4-TL-00644 / Seal RL=669mm. Tooling Set 2 - 4 x 1 format with arms. TERMOFORMAS 691 TRAYS / ECSL4-TL-00150 / Seal RL=581.75mm. Tooling Set 3 - 4 x 1 format with arms. PACTOV 5550 TRAY / ECSL4-TL-00159 / Seal RL=531mm. Belt width - 290mm wide. Overall dimensions - 3200mm long x 1000mm wide x 2000mm high. Weight - 800 kg. In excellent working condition. Ppedpfx Asy S E S Aobyot

Condition: good (used), Year of construction: 2010, Ref. no.: 18637 Manufacturer: BUSCH Type: MM 1252 AV (15 Stück) Year of construction: 2010 Further information: Make | Model | Year | Capacity | Frequency | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2009 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2010 | 250/300 m³/h | 50/60 Hz | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz | Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz | Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | BUSCH MINK MM 1252 AV VACUUM PUMPS Ppjdpfx Aey Tlcwsbyet A total of 15 units Busch Mink MM 1252 AV industrial vacuum pumps are available for sale. The pumps were removed from a running production line and are generally in clean and good cosmetic condition. These high-quality Busch MINK series pumps are widely used in plastics injection molding, central vacuum systems, packaging and automation applications. TECHNICAL SPECIFICATIONS • Manufacturer: Busch • Model: MINK MM 1252 AV • Technology: Dry Claw / Oil-Free Vacuum Technology • Capacity: 250 – 300 m³/h • Final Vacuum: 100 hPa (0.1 bar) • Frequency: 50/60 Hz • Year of Manufacture: 2009 / 2010 • Origin: Germany MAIN ADVANTAGES • Oil-free operating system • Low maintenance costs • Energy-efficient operation • Quiet and reliable performance • Suitable for continuous industrial operation • High Busch quality with worldwide service support APPLICATION AREAS • Plastic injection molding machines • Central vacuum systems • Packaging machines • Thermoforming systems • Automation and conveying systems • Industrial production facilities

Condition: used, Year of construction: 1997, functionality: fully functional, Bürkle Multifoiler, membrane press Model BTF 1628/60 Year of manufacture: 1997 Line for laminating smooth and shaped MDF parts with thermoplastic films from roll or sheet, suitable for PVC, PP, high-gloss PVC, ABS films. Suitable for thermoforming and membrane process. Max. part size: 1250 x 2550 mm Part thickness: 6-35 mm Heating plate dimensions: 1600 x 2800 mm Max. heating temperature: 140°C Stroke: 230 mm Siemens control system Total connected load: 38 kW With 2 aluminium tables and reserve table Weight: 16.5 t Press length: 2,550 mm Press width: 1,250 mm Podpfx Asymyl Ssbyjpt Max. workpiece thickness: 35 mm With pin table