Used Vdf Boehringer Dm 550 for sale (4,574)

Condition: good (used), turning diameter over top slide: 940 mm, turning diameter: 1,260 mm, rotational speed (min.): 8 rpm, rotational speed (max.): 900 rpm, total height: 1,800 mm, total length: 12,200 mm, total width: 1,540 mm, three-jaw chuck diameter: 500 mm, distance between centers: 8,000 mm, VDF Wohlenberg V1180 Distance between centres: 8000 mm 3.5 - 710 rpm Psdpfxox Thqdo Afgopt 71 - 900 rpm Chuck: 500 mm diameter

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, turning diameter: 840 mm, feed length Z-axis: 6,000 mm, bed width: 560 mm, Turning diameter in gap: 1,040 mm, VDF Heidenreich & Harbeck Gildemeister M820x6000 Machine prfessionally refurbished, inspected and tested, very good working condition. BASIC TECHNICAL PARAMETERS: Swing over bed: Ø 840 mm Swing over cross slide: Ø 520 Swing in the gap: Ø 1040 mm Length of gap: 390 mm Distance between centres: 6000 mm Width of bed: 560 mm EQUIPMENT INCLUDED INTO THE PRICE: Digital readout Sony for X and Z axis Central lubrication system for logitudinal support Safety guard on chuck, tool post and rear cover on support Ligtening, cooling pump and emergency stop button ADDITIONAL EQUIPMENT: Pjdjuq A Icepfx Afgept Steady rest range 20-300 mm 4-jaw turning chuck Ø 800 mm Machine located in central Poland, ready for checking. Perfect condition.

Condition: good (used), Bezel moving, moving bezel, steady rest, Lynette -max. passage: Ø 170 mm -Support: ball bearing -Tip height: 345 mm Podpfx Aedna Afefgjpt -Hole spacing: 550 mm -Hole diameter: Ø 21 mm -Drawings: in the photos -Quantity: 1 piece available -Dimensions: 605/80/H670 mm -Weight: 59 kg

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Lukas HDMF 50/36x550 -Type: HDMF 50/36x550/VORM HS 3750 -Stroke: 550 mm Pjdpfx Afefxrf Iogjpt -Piston rod: Ø 36 mm/M22 x 1.5 -Total length retracted: 805 mm -Dimension: 805/160/H160 mm -Weight: 22.3 kg

Condition: excellent (used), Year of construction: 1982, functionality: fully functional, Boehringer-Sturm- Variator-gear-box model D 57 ZK Input speed: 1.500/min. Psdpfx Ajw D T Sbofgept Output speed: 0 - 1.320/min.

Condition: used, Year of construction: 1967, turning diameter over bed 0560 mm turning diameter over slide rest 300 mm turning length 1500 mm spindle bore 65 mm Ppsdpew H Di Ajfx Afget spindle turning speed range 12- 1150 U/min total power requirement 5 kW weight of the machine ca. 4 t dimensions of the machine ca. 4 x 1,6 x 1,6 m With multifix holder, chuck and turning center.

Condition: good (used), Year of construction: 1954, Ref. -No.: 10576 Manufacturer: VDF WOHLENBERG Psdjxmd U Aopfx Afgopt Type: VDF Year of construction: 1954 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Germany Machine-No.: 27XXX Turning Length: 4000 mm Spindle Diameter: Ø 80 mm Faceplate Speeds I: 355 RPM Turning diameter over cross slide: Ø 1000 mm Max. Turning diameter: Ø 1250 mm

Condition: used, Year of construction: 2002, turning diameter 820 mm turning length 2.000 mm control SIN 810 D center height over square guideway 400 mm turning diameter over slide rest 500 mm x-travel 540 mm z-travel 2.100 mm feed x/z-axis 0,01 - 50 mm/min rapid traverse X-axis 5,00 m/min rapid traverse Z-axis 10,00 m/min feeding force facing 12.500 N power feed longitudinal 20.000 N spindle turning speed range 6,4 - 1.600 U/min spindle turning speed - gearbox stage 1 6,40 - 376 1/min. spindle turning speed - gearbox stage 2 27,40 - 1.600 1/min. power capacity at 60% / 100 % load 46,00 / 37,00 KW max. torque at 60% / 100% load 5.073 / 4.069 Nm constant cutting rate 1 - 9.999 m/min. spindle head DIN 55027 - Size 11 spindle diameter in front bearing 170 mm spindle bore 128 mm tailstock quill taper MT 6 diameter of quill 125 mm quill stroke 280 mm thread pitch 0,1 - 400 mm Ppsdpfx Afjw Dvipogst total power requirement 35,00 kW weight of the machine ca. 11,00 t dimensions of the machine ca. 6,00 x 3,00 x H2,60 m SIEMENS Sinumerik 810D mcontrol, chip-conveyor, tail stock, dust exhauster, 2 pc. steady rest. Machine can be inspected under power.

Condition: excellent (used), Swing over bed 1000 mm Distance between centers 2000 mm Center height 500 mm Swing over slide 700 mm Spindle bore 128 mm Spindle speeds 6.4-1'600 rpm SIEMENS 810 D control Misc. accessories Pjdpfowhkdcjx Afgopt MARCELS MASCHINEN CH

Year of construction: 2026, condition: new, DESCRIPTION Horizontal drum chipper, engineered and built for maximum performance and reliability. This heavy-duty, robust machine is suited for the most demanding conditions and is ideal for processing all types of waste wood materials. The Varli VDC-1600 drum chipper features a large infeed opening, making it highly capable of processing waste wood material, logs, and wood bundles (diameters over 700 mm can be easily accommodated). The VDC-1600 can achieve outputs of approximately 100,000 kg per hour of high-quality pulp mill chips or finer fractions suitable for biofuel production. The chipper can also deliver coarser fractions, producing chips up to 200 mm in length (depending on configuration). Built with a heavy-duty frame, the chipper features over-sized, self-aligning bearings housed in steel casings, firmly secured to the chipper’s side structure for long service life and reliable operation. Equipped with 14 feed rollers fitted with special, wear-resistant, surface-hardened teeth, the VDC-1600 provides secure feed and optimised material throughput. Pedpfx Afsyi H Ryegjpt The chipper comes standard with drum-mounted cutting tools made from Hardox, along with replaceable wear plates. OPERATING PRINCIPLE The VDC-series is designed to produce wood chips from logs or bark bundles. Material is horizontally fed by vibrating chute into free-floating feed rollers, which automatically adjust to the material’s height. The feed rollers securely grip and transport the material into a high-speed rotating drum armed with solid knives, fixed with centrifugal wedges—fostering durability, preventing knife damage, and minimizing downtime during tool changes. The rotor knives are easily accessible and can be re-sharpened multiple times. Key features include an adjustable stator knife, hydraulic hood, and hydraulic device for stator knife exchange. BENEFITS - Extremely robust construction and heavy-duty design for stable operation - Centrifugal wedge knife mounting for reduced machine downtime - Adjustable stator knife to extend operating life - Hydraulic hood for swift and easy maintenance TECHNICAL DATA Model: VDC-1600 Infeed Width: 1250 mm Rotor Diameter: 1600 mm Number of Infeed Rollers: 14 Number of Cutting Tools (Knives): 4 Drive Motor(s): 2 x 400 kW Electrical Supply: 400V, 3Phase, 50Hz Fraction Output: 60 mm (SPF), approx. 100,000 kg/h Total Weight: 96,000 kg

Condition: used, Year of construction: 1979, functionality: fully functional, turning diameter: 640 mm, center height: 320 mm, turning length: 2,000 mm, Leadscrew and feedshaft lathe VDF with digital readout, powered top slide, 3-axis feed with rapid traverse, 3-jaw chuck, faceplate, Multifix toolholder with 5 inserts. Pedpjxz Edzsfx Afgopt

Year of construction: 1970, condition: not inspected (used), functionality: unexamined, overall weight: 2,000 kg, total length: 3,000 mm, total width: 1,200 mm, total height: 1,500 mm, machine/vehicle number: 779, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Diameter: 5.4 mm Pedpoy D Tkdofx Afgspt MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,000 x 1,200 x 1,500 mm Machine weight: 2,000 kg External reference: 40

Condition: excellent (used), mileage: 371,032 km, power: 132 kW (179.47 HP), first registration: 11/2016, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,220 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, total length: 7,750 mm, total width: 2,600 mm, loading space length: 5,500 mm, loading space width: 2,400 mm, loading space height: 2,430 mm, Year of construction: 2016, Equipment: tail-lift, General information Number of doors: 2 Cab: single Registration number: 71-BHV-1 Technical information Number of cylinders: 4 Engine capacity: 5.132 cc Front axle: Steering; Suspension: leaf suspension Rear axle: Double wheels; Suspension: air suspension Weights Empty weight: 6.995 kg Carrying capacity: 3.605 kg GVW: 10.500 kg Functional Tail lift: dholandia Cooling engine: diesel and electric Maintenance, history and condition APK (MOT): tested until 11/2026 Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Pjdpfx Asy U Nztjfgspt Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: new, Year of construction: 2026, machine/vehicle number: 20251212004, fuel type: diesel, motor manufacturer: Scania DC13 072A, General information Field of application: Construction Weights Ppjdpfxey Uq D No Afgot Empty weight: 5.029 kg Functional Generator capacity: 550 kVA Dimensions of cargo space: 456 x 170 x 248 cm CE mark: yes Other information Fuel consumption: 75 Liter/Hour at 75% Load Generator: Leroy Somer TAL-A473 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 760 l Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: used, functionality: fully functional, machine/vehicle number: FN411482, Year of construction: 2011, load capacity: 5,000 kg, lifting height: 4,500 mm, fuel type: electric, mast type: triplex, construction height: 2,350 mm, drive type: Elektro, Electric 4-wheel forklift Chassis number: FN411482 Load center: 500 Mast type: Triplex Condition: Ready for operation and fully functional Ppodpfsy U A Iyex Afgst Technical condition: good Front tire type: Superelastic Rear tire type: Superelastic Battery voltage: 80V Side shifter, 3rd valve, windshield, full cabin, interior mirror, windshield wiper

Condition: used, Year of construction: 2008, Connected load: 11.5 kW Feed rate: 11 m/min Workpiece thickness: 8 - 60 mm Edge thickness: 0.4 - 8 mm Roller separation: max. 3.0 x 45 / 0.8 x 65 mm Dust extraction diameter: 1x 120 / 2x 100 mm Podpfx Ajzab Riefgept Working height: 950 mm Dimensions: 5860 x 1560 x 2300 mm Weight: approx. 2600 kg Location: Customer

Condition: good (used), Year of construction: 2005, functionality: fully functional, The machine was serviced annually under a maintenance contract with Okuma. Okuma Mac Turn 550 W / 9-axis turning-milling center Year of manufacture: 2005, Control system: OSP-E 100 L / Expansion Kit “M” Kit One Touch IGF Milling spindle carriage X/Y/Z/B, Counter spindle W-axis, Main spindle with C-axis, Counter spindle with C-axis, Turret carriage below X/Z axis, Max. turning diameter: 720 mm, Turning length: 2,000 mm, Distance between tailstock center and spindle center: 2,505 mm, Y-axis: 250 mm / +/- 125 mm, Main spindle speed: up to 3,500 rpm, Spindle power: 30 kW Turret below: 12-station without driven tool stations, Nco Dmnbyeyt Nvtoujt Turret below with steady rest, therefore only 9 stations instead of 12, Self-centering steady rest: 35 - 240 mm, Milling spindle: infinitely variable B-axis 0.001°, Magazine: 80-station, Mount: HSK 100, New Forkhart three-jaw chuck Ø 400 mm, value 12,000 €, Counter spindle without chuck, currently with arbors / delivery without arbors, Enlarged main spindle: 110 mm Ø 150/110 mm, Spindle nose: Size 11, 2-stage clamping pressure, Counter spindle as a hollow shaft motor, speed up to 3,800 rpm, Ethernet LAN interface, Renishaw in-process measurement, Additional measuring system for Y-axis, Tool length: 450 mm instead of 350 mm, Door automation for both doors, Chip conveyor, Gravity belt filter with clean tank 900 liters, Supply pump, frequency-controlled up to 20 bar, The machine was serviced annually under a maintenance contract with Okuma. In 2023, the cable carrier for the W-axis, including all hoses, was replaced. In October 2024, the linear guides X/Y/Z were replaced. Work performed by Okuma. Machine cleaned. Sheets and covers removed. 8th axis removed. Travel stand removed and lifted out of the machine. ATC removed and lifted out of the machine. All linear guides removed. Mounting surfaces of the Z-axis cleaned. New linear guide for Z-axis including shoes installed and tightened with the specified torques. Pedpfx Afjy Uhfkogopt New ball screw for Z-axis including bearing mounted and installed. Base plate of the travel stand installed and tightened with the specified torques or screwed onto the shoes. Lubrication lines connected. ATC including attachments installed and connected. New linear guides YA and XA installed and tightened with the corresponding torques. New ball screw YA including bearing installed. Travel stand installed and lubrication lines connected. Base plate XA placed and aligned. 8th axis placed and aligned. H1 turret installed - Install drive motor for the 8th axis - Assembly of 8th axis + new H1 and adjust geometry - Functional test of 8th axis and H1 - Run-in program for B-axis approx. 12 hours, then drain old oil from the 8th axis - Run-in program for H1 and create defect report for OEG - Install left door, adjust various sheets - Install chuck - Adjust zero points - Check tool change

Condition: new, Year of construction: 2026, machine/vehicle number: 7735357, fuel type: diesel, motor manufacturer: Scania DC13 072A, General information Field of application: Construction Weights Empty weight: 5.215 kg Pedpfxoy T D Dye Afgept Functional Generator capacity: 550 kVA Dimensions of cargo space: 467 x 160 x 245 cm CE mark: yes Other information Fuel consumption: 72 Liter / Hour at 75% Load Generator: Mecc Alte ECO40 3S4 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 1750 l Production country: IT Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank = Remarks = Stage V Generator Stage V Aggregaat Stage 5 Generator Stage 5 Genset Stage V Gen set Stage V Generator set EU Stage V Generator StageV

Year of construction: 2010, condition: used, Technical details: range of revolution per miute: 180 U/min voltage: 220/ 50 V/Hz machine weight approx.: 150 kg dimension machine xH: 1,2 x 0,8 x 1,3 m total power requirement: 550 kW Car tire balancing machine The balancing process is automatic with wheel braking. Program selection can be chosen between 11 balancing methods. Microprocessor controlled LED display with digital weight display. Psdeu Ic Aiepfx Afgspt Center hole of rim Ø 40 - 154mm Shafts Ø 36mm Measuring speed 120 rpm. Measuring time 5 - 10 sec. Cone sizes: Ø 44 - 63mm; Ø 61 - 79mm; Ø 77 - 114mm; Ø 107 - 154mm Wheel dimension: Rim width: 1,5" - 18" RimØ max. 10" - 24" Wheel Ø max. 890mm Wheel weight max. 65kg *

Condition: used, Roller conveyors with chains pull 90° RA1846 Type: Transnorm 3300-600-550 Length: FL = 3300 mm Conveyor width: FB = 550 mm Total width: 600 mm The chains off slide width: 700 mm height (BH): 140 mm Support roller pitch: 80 mm including pneumatic stopper Optionally available: Supports Side guide one and both sides frequency inverter Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Podpfx Aok Abg Dsfgopt For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Lippert belt conveyor ascending belt GF 4360-550-400 RA1606 The Lippert belt conveyor is from 2001 and in a good (used) condition. The belt conveyor has a SEW brand motor with MOVIMOT frequency converter to control the speed. Side guides and/or light barriers can be mounted on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures shown of the conveyor system were taken in a logistics center while it was still installed. Technical data: Conveyor length (NL): 4360 mm (leading belt + ascending belt with bend and upper straight) stand width (NB): 550 mm belt width (GuB): 400 mm overall height (BH): 105 mm support feet: optional Conveyor speed (v m/s): adjustable up and down with frequency converter Drive: SEW gearmotor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Idler pulley (UR): Ø = 81 mm Drive pulley (AT): Ø = 131 mm Belt: Type XVT-2128 Year of manufacture: 2001 incline / decline: adjustable Optionally available: Supports Side guides one and both sides Psdpfjk Abd Nex Afgept Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Lippert belt conveyor ascending belt GF 1995-550-400 RA1656 The Lippert belt conveyor is from 2001 and in a good (used) condition. The belt conveyor has a SEW brand motor with MOVIMOT frequency converter to control the speed. Side guides and/or light barriers can be mounted on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures shown of the conveyor system were taken in a logistics center while it was still installed. Technical data: Conveyor length (NL): 1995 mm (leading belt 560mm + ascending belt 1435mm) stand width (NB): 550 mm Belt width (GuB): 400 mm overall height (BH): 105 mm support feet: optionally available Conveyor speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor DT80K4/BMG/MM05 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Idler pulley (UR): Ø = 81 mm Drive pulley (AT): Ø = 131 mm Belt: Type HSL-8E Year of manufacture: 2001 incline / decline: adjustable Optionally available: Supports Side guides one and both sides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. Ppodsk Abd Tjpfx Afgjt With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm spiral helix belt curve conveyor left 85°-775-550 IR600 RA1658 The Transnorm belt curve conveyor is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included. These are optionally available on request. Belt curves are frequently used in intralogistics for the internal transport of unit loads and are an indispensable part of modern distribution centers. Transnorm belt curves impress with performance and reliability. Thanks to a low-tension drive, over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the smoothest possible running. Technical data: Type designation: belt curve conveyor TS 1600-105 Conveyor length middle radius (NL): 1703 mm frame width (NB): 775 mm belt width (GuB): 550 mm overall height (BH): 210 mm inner radius (IR): 600 mm Conveying angle: 85° degrees (coiled 175mm rising) Incline: 175 mm / 85° = 741,2 mm / 360° Support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gearmotor SA37/T DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Ppsdpek Abfbsfx Afget Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor left GKF 30°-750-550 IR900 RA1404 Pjdpjk Aa Unofx Afgept The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 759 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 30° degrees Support feet optionally available Conveying speed (v m/s): 0,03-1,05m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, KT36 Year of construction: 2001 Optionally available: Supports Side guides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor GKF 1650-750-550 IR600 70° right RA1441 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 1650 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 70° degrees support feet: optional Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2001 Characteristic / Accessories: Lateral guides included on both sides Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Ppsdpfok Abazsx Afget Your specialist and contact for intralogistics