Used Wöhler Leakage Tester for sale (272)

Condition: new, maximum load weight: 29,965 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,800 mm, Year of construction: 2026, Equipment: ABS, Brand new FD-Tec 3-axle tank semi-trailer * SV2011-22-R300 (Tank volume: 30 m³, material thickness: 3 mm stainless steel, temperature range: 0–60°C.) * Former designation SV2006 Basic / Now SV2011 * 8" manual docking funnel * 6" gravity discharge connection * 4" manual cleaning line with 2 x 2.5" nozzles (1 at the front and 1 in the center of the tank) * ABS braking system by Wabco, no electronic air suspension * 9-ton VALX axles, Ø430 disc brake, ET120 * Automatic lift axle on the first axle * Raising/lowering via control from the EBS modulator * Start-up assistance: 2nd and 3rd axles can be loaded up to 130% under 30 km/h Bedpfxsy Sqrbs Af Relh * Third axle is a self-steering axle * Apollo Vredestein 385/65R22.5 tires * 24-volt lighting system: 2 x LED work lights at the rear, 1 x on the left side * Work lights left and right by the first axle * Standard 15-pin connection + 2 x 7-pin connectors * Flashing side marker lights * Ball valve for drainage at the lowest point of the tank * Vogelsang pump, 6,000 L/min (Pump manufacturer recommends a leakage oil return line) * Automatic pump shut-off * 2 wheel chocks * Left and right (narrow and tall) galvanized steel hose trays, each 5 m (250 mm wide, 190 mm high) * Tension cables above the hose trays * Tire pressure monitoring system, air suspension with lift/lower valve, rotary slide valve * Tank painted with two coats of paint – Category A (without clear coat) * Tank painted in a single color RAL 7030, STONE GREY * Chassis painted in a single color RAL 7016, ANTHRACITE GREY * ...

Condition: new, maximum load weight: 29,965 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,800 mm, Year of construction: 2025, Equipment: ABS, Brand new FD-Tec 3-axle tank semi-trailer * SV2011-22-R300 (Tank volume: 30 m³, material thickness: 3 mm stainless steel, temperature range: 0–60°C.) * Former designation SV2006 Basic / Now SV2011 * 8" manual docking funnel * 6" gravity discharge connection * 4" manual cleaning line with 2 x 2.5" nozzles (1 at the front and 1 in the center of the tank) * ABS braking system by Wabco, no electronic air suspension * 9-ton VALX axles, Ø430 disc brake, ET120 * Automatic lift axle on the first axle * Raising/lowering via control from the EBS modulator * Start-up assistance: 2nd and 3rd axles can be loaded up to 130% under 30 km/h * Third axle is a self-steering axle * Apollo Vredestein 385/65R22.5 tires * 24-volt lighting system: 2 x LED work lights at the rear, 1 x on the left side Bledpfx Afewwn Abs Roh * Work lights left and right by the first axle * Standard 15-pin connection + 2 x 7-pin connectors * Flashing side marker lights * Ball valve for drainage at the lowest point of the tank * Vogelsang pump, 6,000 L/min (Pump manufacturer recommends a leakage oil return line) * Automatic pump shut-off * 2 wheel chocks * Left and right (narrow and tall) galvanized steel hose trays, each 5 m (250 mm wide, 190 mm high) * Tension cables above the hose trays * Tire pressure monitoring system, air suspension with lift/lower valve, rotary slide valve * Tank painted with two coats of paint – Category A (without clear coat) * Tank painted in a single color RAL 7030, STONE GREY * Chassis painted in a single color RAL 7016, ANTHRACITE GREY * ...

Year of construction: 2019, condition: ready for operation (used), A Flying Probe Tester Seica Pilot V8 Next Series with inline handling module on the left for vertical tilting of the PCB and inline handling module on the right for horizontal tilting and rotating of the PCB is available. Flying Probe Test System Seica Pilot V8 Next Series: PCB clamping system: manual, double-acting, manual active test area: 538x610mm, active test area: 518x610mm, PCB dimensions: 540x610mm, min. PCB size: 20x20mm, PCB thickness: 0.3 to 5mm, max. component height: 37mm, PCB loading: vertical, UUT edge clearance manual/automatic: 2/6mm, length: 1750mm, width: 1030mm, height: 1995mm, weight: 1.4t. Test tools/techniques: FNODE signature analysis on the nets of the unit under test, standard analog and digital in-circuit test, vectorless tests, JSCAN and OPENFIX to test ICs for opens and shorts, PWMON net analysis with power-on of the assembly, continuity tests to detect open connections on the assembly, visual tests for detecting component presence, component absence and rotation, high-resolution color camera, optional functional tests and boundary scan test capabilities, optional on-board programming tools for digital components, with complete documentation. An inspection on site is possible. Bjdpfxey Sv S Hj Af Rolh

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 76 / 2011, briquette diameter: 75 mm, type of input current: three-phase, input frequency: 50 Hz, input voltage: 380 V, We offer a COMAFER DIN 250 briquetting press in good condition, manufactured in 2011. Cylinder with closed-loop oil cooling and cooler capacity: 100–250 kg/hour, depending on the material. Briquette diameter: 75 mm. cylindrical housing (ø1200) with inspection door, additional ring (sleeve) ø1200 / h930, pressing force approx. 1100 kg/cm2. 2 cylinders. Briquette cylinder ø 200 mm. pump motor (11 kW / 15 HP, 380 V, 50 Hz). Monobloc, self-centering, without tie rods for the round die. Electrical control panel with PLC, automatic and manual cycle. Blsdpoy Uihajfx Af Rjh Shut-down mechanism with open die and die pressure gauge. Digital thermostat for oil temperature control, level switch to prevent oil leakage. Closed-loop oil cooling system (air/oil). Closed-loop cooler for die cooling (580 mm x 550 mm x 908, weight 56 kg). threading die for the production of long briquettes, uniform length briquettes, compliant with CE standards. dimensions: 2100 mm x 1350 mm x 1540 mm (height), weight: 1600 kg If you have any questions or require further information, please send us a message. Phone inquiries are available in Hungarian only.

Condition: excellent (used), Year of construction: 2018, High-quality Rittal enclosure cooling unit from the TopTherm series in very good (used) condition. This device is designed for reliable air conditioning and cooling of control cabinets and industrial equipment. Robust industrial design featuring a high protection rating and powerful cooling technology. Manufacturer: Rittal Model: TopTherm SK 3304540 Device type: Enclosure cooling unit Condition: Very good used condition Date of manufacture: 10/2018 Serial number: 2018K000166679 Year of manufacture: 2018 Voltage: 400 V / 50 Hz / 3~ Bljdpfx Afey Sbvdj Rjh Alternative voltage: 460 V / 60 Hz / 3~ Rated current: 2.2 A Starting current: 11.5 A Circuit breaker: 6.3 – 10 A Power consumption: 0.64 kW Total cooling capacity DIN EN 14511: 1.10 kW Sensible cooling capacity DIN EN 14511: 0.94 kW EER L35 L35: 1.72 Refrigerant: R134a Refrigerant charge: 325 g GWP R134a: 1430 CO2e: 0.46 t Operating temperature range: 10 °C to 55 °C Protection class, internal circuit: IP54 Protection class, external circuit: IP34 Weight: 40 kg Hermetically sealed: Yes Leakage tested according to EN-378-2 CE marking available Price per unit; several units available

Condition: not inspected (used), Chain tester Bledpfjix Nilox Af Reh

Condition: used, functionality: unexamined, Complete metal testing and materials testing laboratory Industrial quality assurance/testing laboratory as a complete package A fully equipped professional metal and materials testing laboratory from the industrial QA sector is for sale. The package includes, among others: OES metal analysis, universal testing machine, technical cleanliness analysis according to VDA 19 / ISO 16232, metallography equipment, hardness testing, coating thickness measurement, laboratory scales, water analysis, laboratory devices, extensive Köttermann laboratory furnishings, and consumables. Manufacturers include: AMETEK/SPECTRO, GALDABINI, JOMESA, Struers, Fischer, List, Ernst, Zeiss, KERN, Mettler, IKA, Memmert, Macherey-Nagel, Hanna, WTW, and Köttermann. Key features: - AMETEK / SPECTRO SPECTROTEST TXC02 UV portable OES metal analyzer - GALDABINI QUASAR 100 universal testing machine / tensile tester 100 kN - JOMESA filter analysis system for technical cleanliness in accordance with VDA 19 / ISO 16232 - Struers TransPol-5 portable metallographic grinding and polishing system - Struers Rotopol-2 metallographic grinding and polishing machine - Fischer DELTASCOPE FMP30 coating thickness measuring system - List-Magnetik MEGA-CHECK Master coating thickness gauge - Ernst Computest SC portable hardness testing system - Carl Zeiss Jena Neophot metallographic reflected light microscope - Köttermann fume hoods, laboratory benches, hazardous materials cabinets, and chemical cabinets Bjdpoy Rglnsfx Af Rslh - Extensive laboratory consumables, laboratory glassware, and accessories Complete object description can be found in the documents.

Condition: used, Year of construction: 1996, functionality: limited functionality, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 650 mm, feed length X-axis: 630 mm, feed length Y-axis: 600 mm, feed length Z-axis: 650 mm, controller manufacturer: Fanuc, controller model: MSX-516, table width: 500 mm, table length: 500 mm, rotational speed (max.): 12,000 rpm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, We are offering this used MORI SEIKI SH-50 horizontal machining center, year of manufacture 1996. Model: SH-50 Bodpfx Afoyt Nnpo Relh Serial number: 450 The machine is still under power and available at short notice. • P8 Power Supply worth €1,500 was newly replaced in August 2024 • The spindle was repaired in 2017 and, since then, has mostly been used in single-shift operation, as we primarily produce single parts and small batches. For this reason, the machine has spent most of its time being set up. • Machine: Milling machine Mori Seiki SH50 • Control: Fanuc MSX-516 • Year of manufacture: 1996 • Configuration: Horizontal milling machine with indexing table • Tool capacity: 60 (BT40) • Number of pallets: 2 (500mm x 500mm) • Travels: X630mm / Y600mm / Z650mm • Spindle speed: 12,000 rpm • Chip conveyor Known defects: Rapid traverse speed of the X axis has been reduced by 20% to extend the life of the telescopic covers. The sealing ring on the pallet changer is likely defective, leading to oil leakage. As a temporary fix, we installed a ball valve in between; when we need to change pallets (which is not very often), we open it manually. The machine is sold as viewed, without any guarantee or warranty. Any liability for defects, including hidden defects, is excluded to the extent permitted by law. If you have any questions or need further information, please feel free to write us a message or call us.

Condition: used, mileage: 62,800 km, power: 115 kW (156.36 HP), first registration: 08/2016, fuel type: diesel, empty load weight: 3,292 kg, maximum load weight: 4,198 kg, overall weight: 7,490 kg, tire size: 245/70R17.5, axle configuration: 4x4, wheelbase: 2,750 mm, next inspection (TÜV): 02/2026, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 2, loading space length: 2,950 mm, loading space width: 1,700 mm, loading space height: 400 mm, Equipment: additional headlights, all wheel drive, cabin, differential lock, onboard computer, power assisted steering, trailer coupling, Vehicle location: Bovenden, steel body, registration as house vehicle, 1x air suspension seat, rear window, heated mirrors, electric window left, electric window right, 6-speed manual transmission, PTO, raised exhaust, differential lock, work lights, beacon, leaf spring suspension, tow bar with ball head, trailer coupling, winter service equipment, lashing eyes, underrun protection, side aluminum underrun protection, pendulum flaps, green environmental badge. Wheelbase: 2750 mm Bodywork: 3-way tipper body Differential lock on front and rear axle 3-pole external socket for winter service lighting Winter service lighting with 4 headlights & rotating beacon 13-pole external socket at rear for trailer operation Hydraulics: 2-circuit system: movement circuit 30l/200 bar & power hydraulics 50l/min 180 bar 1x power hydraulics routed to the front left with leakage oil line Continuous operation on circuit 1 with 30l 250bar Front mounting plate DIN B size 3. Bjdpsyap Ayjfx Af Rolh ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to changes, prior sale and errors!

Condition: excellent (used), I sell a hardness tester HAUSER 290 DR. Blsdou Udqropfx Af Reh

Year of construction: 2022, condition: like new (used), functionality: fully functional, Filter never used, still in the box. Model: NYB‑30 Filter Area: 30 m² Cake Volume: ~600 L Capacity: 6–8 T/h (crude oil) Working Pressure: 0.1–0.4 MPa (max 0.5 MPa) Shell Temperature: ≤ 150 °C Machine Volume: ~2,300 L Weight: ~2,500 kg Shell Diameter: ~1,200 mm Plate Spacing: 70 mm Inlet/Outlet: DN 50 inlet/outlet, DN 40 overflow, DN 500 discharge Total Height: ~3,150 mm Key Features: Hermetic sealed vertical structure – no leakage or odor High filtration precision – ideal for pre-degumming and post-bleaching crude oils Low maintenance – long service life of filter plates Simple cake discharge – hydraulic or manual vibration release Can be steam jacketed – optional heating for waxy oils Filter aid compatible – supports use of bleaching earth or diatomaceous earth Bledpfxswwmzis Af Rsh Typical Applications Crude oil clarification after settling Bleaching earth filtration (after bleaching tank) Post-degumming or post-neutralization polish Winterization step before dewaxing Food, biodiesel, cosmetic-grade oil prefiltration

Condition: good (used), Year of construction: 1997, functionality: fully functional, We offer an nice condition Matsuura with tools and accessoriess, very atractive machine for a serious work. Description Matsuura MC600VF Vertical Machining Centre in great working condition ready to use. COOLING TROUGH SPINDLE including Large Qty of BT40 Tooling (33 TOOLS, Universal 3D Tester. Country of Origin: Japan. Spindle Chiller WASTE CONVEYOR with Yasnac i80M Control 20 Position: ATC BT40 : Taper Specifications Manufacturer MATSUURA Model MC600VF Year 1997 Condition Used Serial Number 970112285 Bedpfx Asvkx Rkjf Relh Table size 870 x 400mm Coolant tank X = 600 Y = 410 Z = 470mm Spindle speeds 30 – 15000 rpm.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Shenzhen ICM Technology Development Co., Ltd., controller model: 880W02, pipe diameter (max.): 38 mm, pipe length (max.): 3 mm, tube wall thickness (max.): 2 mm, bending angle (max.): 190 °, bending radius (max.): 200 mm, bending radius (min.): 2 mm, mandrel length: 150 mm, number of axes: 2, table length: 3 mm, overall weight: 1,300 kg, total length: 3,900 mm, total width: 900 mm, total height: 1,400 mm, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, oil tank capacity: 80 l, number of digital displays: 1, warranty duration: 24 months, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, quick-change device, Full Automatic Pipe Bending Machine DW38CNC-3A-1S Equipped with a touchscreen and CNC control system; capable of storing up to 500 sets of parameter groups. Features a rebound compensation setting program, with built-in confidentiality protection for programs and processing data. Servo control is adopted for corner bending, pipe bending and material feeding functions. The operating system is protected by passwords and physical keys, and supports production quantity & runtime records for efficient production management. Comes with slow bending and slow core pulling functions. Fault messages are displayed on the screen to help operators troubleshoot problems promptly. Touchscreen This pipe bender is equipped with a Weinview industrial touchscreen for its operation interface, which delivers an intuitive operation experience and allows new operators to get started quickly. You can directly edit the pipe bending process parameters on the interface, such as feeding distance, rotation angle and bending angle, and separately set the running speed for each step. During operation, the interface displays real-time axis positions, bending progress and production cycle, and automatically counts total output and shift output to help you manage production efficiency effectively. It also supports manual single-step debugging, automatic continuous operation, program editing and equipment parameter setting. Different modes can be switched with one click, making it convenient for machine trial runs and mass production alike. Bedpoy Uuw Tjfx Af Rjlh Hydraulic solenoid valve manifold This integrated hydraulic solenoid valve manifold serves as the control center of the CNC pipe bender's hydraulic system. Adopting industrial-grade modular design, it integrates multiple solenoid valves to independently control the movements of the feeding axis, rotating axis, bending axis, as well as clamping, auxiliary pushing and other auxiliary mechanisms. Linked with the CNC system, it converts control commands into precise hydraulic power output, enabling smooth operation throughout pipe feeding, rotation and forming. Matched with high-pressure sealed hydraulic hoses, it maintains zero leakage and high stability under full-load operating conditions, delivering reliable performance for long-term mass production. Servo drive These four units are Mitsubishi servo drives equipped on our pipe bender, acting as the power core that governs key movements including material feeding, pipe rotation and pipe bending. Adopting Mitsubishi MR-JE series industrial-grade high-end servo drives, they feature high positioning accuracy and fast response. Both feeding distance and rotating angle can be controlled precisely with no deviation. With excellent stability, they rarely lose steps or malfunction during long-hour continuous operation. This ensures consistent bending precision for every pipe and a high finished product yield.

Condition: new, working width: 1,250 mm, For enquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Seppi M. H7 125 Flail Mulcher / incl. slew ring / incl. floating mounting / NEW unit / in stock & immediately available Price: €17,890.00 net / €21,289.10 gross - Working width: 125 cm - Overall width: 140 cm - Depth: 97 cm - Height: 57 cm - Weight: 410 kg without accessories - Mulches grass and light brush up to 7 cm in diameter - Suitable for excavators from 5 to 15 tonnes - Universal interface for mounting various adapter plates - S420: double-walled housing made from high-strength S420 steel - WEARPLATE: housing with replaceable wear plates - LOW PROFILE: low-profile design - Indirect V-belt drive with 4 belts - Drive designed for hydraulic motors depending on carrier's oil flow - 4D ROLLER: reinforced support roller 152 mm Ø, with double-taper roller bearings, height adjustable - COUNTER CUTTERS: two rows of replaceable drop-forged counter blades - Rotor wall thickness: 12.5 mm - Front chain guard - Rear rubber protection - Colour: red RAL3020 · anthracite RAL7021 OPT 371 HELIX ROTOR TECHNOLOGY - Triple helix rotor with SMO flails (standard) - 12 pcs, part number 130.02.001 OPT 291 VARIO FLOW - Axial piston hydraulic motor with variable displacement 29–58 cm³ and pressure relief valve - Displacement in cm³ (min-max): 29 - 58 - Required hydraulic pressure in bar (min-max): 100 - 300 - Required hydraulic flow rate in l/min (min-max): 55 – 150 OPT 099 Floating Mount (parallelogram linkage) OPT 555 Oscillating Adapter OPT 372 Hydraulic 190° Rotary Device Three hydraulic lines are required: supply, return, and leakage oil. Optional: MS08 adapter plate incl. bolts and installation = €880.00 net Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. We have a very large selection of various Seppi M. products in our warehouse, all immediately available! Mr. Herden (phone) will be happy to assist you. We are also happy to provide you with a financing offer upon request. We are an official sales and service partner for: - Westtech Blsdsy E Etyopfx Af Rsh - OilQuick - Holp - Magni telescopic handlers - DMS - Gierking GMT - Weber MT - Seppi M. - JCB construction machinery - Mercedes-Benz - Iveco With over 800 used vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range! Subject to errors and prior sale! = Further information = Please contact Marius Herden for more information.

Condition: new, Year of construction: 2012, Heating: Electric Dimensions (W x D x H): 2134 x 598 x 1092 mm Roller diameter: Ø 330 mm (13 inches) Ironing width: 1504 mm (59.2 inches) Hourly output: 34 kg/h Evaporation rate: 17 liters/h Roller speed: 1 to 6 m/min Moist air flow rate: 350 m³/h Noise level: 55 dB(A) Thermal leakage rate: 3% Foot threading type: M10 Bljdjw El Azspfx Af Rjh Weight: 447 kg Packaging volume: 2 m³ Electric power: 20.7 kW Voltage: 400 V / 29.1 A / 3ph + N / 50/60 Hz Year of manufacture: 2012

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 20 ft, color: other, overall weight: 1,400 kg, empty load weight: 1,300 kg, loading space width: 2,438 mm, loading space length: 6,058 mm, loading space height: 285 mm, Equipment: cooling unit, Office Container / Residential Container / Welfare Container Price: €6,900 Description: OMEGA CONTAINERS has been active on the market since January 2017. We specialize in the comprehensive production of office, welfare, residential, and technical containers. We provide professional service from planning and production to transport and installation. OMEGA containers are constructed with a robust steel frame, which allows modules to be transported frequently or moved by crane without risk of damage. Our container’s standard dimensions: Length: 6058 mm Width: 2438 mm External height: 2850 mm Internal height: 2500 mm We also manufacture custom containers tailored perfectly to client requirements. Steel Construction Manufactured from 3 mm thick open steel profiles reinforced with 5 mm thick steel plates. The surface is coated with epoxy primer and finished with polyurethane paint. Color selection in line with RAL color charts. Roof: Steel construction filled with sandwich panels with a 100 mm thick polystyrene or PUR foam core. The roof is fully sealed with 1 mm thick galvanized sheet metal. Walls: Made from sandwich panels with a 100 mm polystyrene core or PUR foam. The exterior cladding is sheet metal in silver, white, or graphite. The interior finish is white sheet metal. Flooring: Blodpsy Hkw Tofx Af Reh Made from tightly welded steel profiles. Moisture barrier: trapezoidal sheet T-14. 100 mm mineral wool insulation. 25 mm OSB board. Finished with an industrial PVC covering with increased abrasion resistance and cover trim. Fittings: - Hinged door 900 mm x 2000 mm, white or anthracite - Turn/tilt window 1200 mm x 1200 mm - External roller shutter Electrical installation: 1x Distribution box – RCD + fuses; Earth leakage circuit breaker + fuses 1x 32A 5P power connection 1x External plug 32A 5P 2x LED lamps (2x36W) 3x Double power outlets 1x Electric heater 2kW Additional options: - Optionally equipped with toilet, shower, washbasin, incl. water connection, heating, etc. - Multiple windows of various sizes - Installation of glass doors - Installation of roller shutters - Installation of air-conditioning with heating function - Partition walls for room separation - Connecting multiple containers to form one unit We offer WhatsApp service—Omega Container is happy to answer any questions you may have! We look forward to your inquiry! Mobile DE-

Condition: like new (used), mileage: 62,000 km, Year of construction: 2025, VOLVO FH 500 Drive: 4x2 Number of axles: 2 Blsdpfsy Dty Eox Af Rsh Power: 375 kW Power: 510 HP Wheelbase: 3,700 mm Gross vehicle weight (GVW): 18,000 kg Unladen weight: 7,479 kg Payload: 10,521 kg Mileage: 62,000 km Emission standard: Euro 6e First registration: 31/03/2025 Transmission: Automatic Front suspension: Leaf springs Rear suspension: Air suspension Front tyres: 385/65R 22.5 Rear tyres: 315/80R 22.5 Paint: Winter White (1103) Axle ratio (i): 2.64:1 Engine brake: Volvo Engine Brake + (VEB+) PTO (gearbox side) Axle load tester, boost pressure gauge Chassis: Steel rims AdBlue tank 90 l – right side LED work lights on cab Pre-wiring for roof mounted light bar LED rear lights Rear LED work lights on chassis Tipping hydraulics Mechanical cab tilt PVC mudguards Fuel tank capacity (left): 510 l 24V 7-pin trailer socket ABS (Anti-lock Braking System) EBS (Electronic Braking System) ESP (Electronic Stability Program) LED cornering lights Manual sunroof/vent flap Pneumatic horn in cab Cab type: FH long-haul Cab with air suspension LED fog lights Pre-installation for beacon LED headlights Sun visor Front bumper: steel Turn assist FMS interface Light sensor Driver alert support Navigation system Rain sensor Reversing camera Reversing alarm Lane keeping assist Digital instrument cluster Cruise control Adaptive cruise control (ACC) Sleeper berths: 1 CB radio preparation Hands-free system Automatic climate control Comfort driver’s seat with air suspension Multifunction steering wheel Heated driver’s seat Auxiliary heater Side sun-blind (driver side) Digital radio Multimedia system Refrigerator

Condition: new, working width: 125,000 mm, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Seppi M. H7 125 Flail Mower / incl. floating linkage / NEW unit / in stock & immediately available Price: €13,890.00 net / €16,529.10 gross - Working width: 125 cm - Total width: 140 cm - Depth: 97 cm - Height: 57 cm - Weight: 410 kg - Mulches grass and light brush up to 7 cm Ø - For excavators from 5 to 15 tonnes - Universal mounting interface for installing various adapter plates - S420: double-walled housing made of high-strength S420 steel - WEARPLATE: housing with replaceable wear plates - LOW PROFILE: low design - Indirect V-belt drive with 4 V-belts - Drive designed for hydraulic motor depending on the carrier’s hydraulic flow Bjdpfx Afjyix Haj Rolh - 4D ROLLER: reinforced support roller, 152 mm in diameter, with double-cone roller bearings, height-adjustable - COUNTER CUTTERS: two rows of replaceable drop-forged counter blades - Rotor wall thickness: 12.5 mm - Front guard with chains - Rear guard made of rubber - Color: red RAL3020 · anthracite RAL7021 OPT 371 HELIX ROTOR TECHNOLOGY - Triple helix rotor with SMO flails (standard) - 12 pieces, part no. 130.02.001 OPT 291 VARIO FLOW - Axial piston hydraulic motor with variable displacement 29-58 cm³ and pressure relief valve - Displacement in cm³ (min-max): 29 - 58 - Required hydraulic pressure in bar (min-max): 100 - 300 - Required hydraulic flow in l/min (min-max): 55 – 150 OPT 099 Floating mounting (parallelogram linkage) OPT 555 Oscillating adapter Three hydraulic lines are required: pressure, return, and drain/oil leakage. Option: MS08 adapter plate incl. bolts and installation = €750.00 net Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. Our warehouse offers a very large selection of various Seppi M. products, all available immediately! Mr. Herden (phone) will be happy to assist you. We can also provide you with a financing offer upon request. We are an official sales and service partner for: - Westtech - OilQuick - Holp - Magni telescopic handlers - DMS - Gierking GMT - Weber MT - Seppi M. - JCB construction machinery - Mercedes-Benz - Iveco In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply you with the complete Seppi M. product range! Errors and prior sale excepted. = Further information = Please contact Marius Herden for more information.

Year of construction: 2026, operating hours: 25 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: P1S10_27_3, PressOne P1S-10 is a press-in machine from Finland, which is driven by a ball screw with a servo motor. That gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no hassle when changing the oil and no filtration problems. Pure power, accuracy and speed! Technical data: P1S-10 Main press technology: ball screw with AC servo drive Maximum pressing force: 100 kN Repeatability of force setting: ± 1% Maximum opening / approach speed: * 120 mm / s Press speed: max 10 mm / s Throat: 620 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 5 kW Control: P1S TC12 touchscreen 12 " Tool connection: Type PressOne Universal, 4-fold lower swivel base * The maximum approach speed requires the "Fast approach speed" option. Control features of the P1S TC12: - Programmable press force - Programmable lift opening - Programmable pressing speed - Programmable speed change point after starting before pressing - 2-stage cycle (start and press) - Possibility to set the press stroke length in millimeters - Save programs for memory control by name or number - Piece counter, cycle stop after the last press - Material table for material / pressing force Bodpfx Afoy A Ntls Rolh - Tool library - FTP server connection

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: P1S5_21, PressOne P1S-5 is a press-in machine from Finland, which is driven by a ball screw with a servo motor. That gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no hassle when changing the oil and no filtration problems. Pure power, accuracy and speed! Technical data: P1S-5 Main press technology: ball screw with AC servo drive Blodpoy A Nq Djfx Af Rsh Maximum pressing force: 50 kN Repeatability of force setting: ± 1% Maximum opening / approach speed: 120 mm / s Press speed: max 10 mm / s Throat: 470 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 touchscreen 12 " Tool connection: Type PressOne Universal, 4-fold lower swivel base * The maximum approach speed requires the "Fast approach speed" option. Control features of the P1S TC12: - Programmable press force - Programmable lift opening - Programmable pressing speed - Programmable speed change point after starting before pressing - 2-stage cycle (start and press) - Possibility to set the press stroke length in millimeters - Save programs for memory control by name or number - Piece counter, cycle stop after the last press - Material table for material / pressing force - Tool library - FTP server connection

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: P1S5_20, PressOne P1S-5 is a press-in machine from Finland, which is driven by a ball screw with a servo motor. That gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no hassle when changing the oil and no filtration problems. Pure power, accuracy and speed! Technical data: P1S-5 Blodpfx Asy A Nn Nef Reh Main press technology: ball screw with AC servo drive Maximum pressing force: 50 kN Repeatability of force setting: ± 1% Maximum opening / approach speed: 120 mm / s Press speed: max 10 mm / s Throat: 470 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 touchscreen 12 " Tool connection: Type PressOne Universal, 4-fold lower swivel base * The maximum approach speed requires the "Fast approach speed" option. Control features of the P1S TC12: - Programmable press force - Programmable lift opening - Programmable pressing speed - Programmable speed change point after starting before pressing - 2-stage cycle (start and press) - Possibility to set the press stroke length in millimeters - Save programs for memory control by name or number - Piece counter, cycle stop after the last press - Material table for material / pressing force - Tool library - FTP server connection

Condition: repair required (used), Year of construction: 2009, functionality: not functional, machine/vehicle number: 281-09, Technical Characteristics: # Machining Workspace: X 550 mm; Y 400 mm; Z 360 mm # Axis Description: 3 linear axes (X, Y, Z) + rotary table axis A and 2 rotary axes B, equipped with an index divider head with direct angular measuring system, max. rotation speed 50 min⁻¹, accuracy +/- 5" # Axis A swivel: +/-110˚ # Max. clamping/part dimensions: Ø 247 x 830 mm; max. weight 360 kg # Rapid traverse: X/Y/Z 40/40/40 m/min # Distance between divider heads B1/B2: 250 mm # Spindle speed: 1-10,000 rpm # Spindle interface: DIN69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 1x48 tools / chip-to-chip time approx. 2.5 sec # Max. tool diameter: Ø 82 mm / max. length 250 mm / max. weight 5 kg Bsdpfxsxwmvkj Af Rolh Electrical Connection: # Voltage: 3x400V/50Hz # Total installed power: approx. 45 kVA / 80A Dimensions: # Installation footprint: approx. 4.4 x 2.3 x 3.1 m # Weight: approx. 8,500 kg Equipment Includes: # CNC control: Siemens 840D Power Line # Chip extractor: Spring Knoll # Oil cooling system # High-pressure oil filtration system, up to 80 Bar: Knoll HL 450/1200 # Cooling system for spindle, linear guides, and control cabinet # 2 independent oil lubrication systems # Oil vapor extraction/recovery system: LTA AC3002 # Fire suppression system: Kraft & Bauer # Part presence detection: with low-pressure air sensors # In-process measurement: Marposs T25 # Tool breakage detection: Blum Novotech # Tool holder detection system in spindle # Documentation: incomplete Machine Condition: NOT OPERATIONAL # Hydraulic oil leakage at Peiseler rotary table # New hydraulic pump available in stock

Condition: ready for operation (used), Year of construction: 2001, operating hours: 65,000 h, laser power: 3,200 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, number of axes: 3, CO2 laser cutting machine manufactured in 2001. This TRUMPF Trumatic L3030 features a laser power of up to 3208 W in CW mode, providing efficient cutting capabilities. It operates on a 3-phase AC supply. If you are looking to get high-quality cutting capabilities, consider the TRUMPF Trumatic L3030 machine we have for sale. Contact us for further details. • Electrical • Supply voltage: 400 V • Phases: 3-phase AC • Frequency: 50 Hz • Rated power: 73 kVA • Rated current: 105 A • Maximum fuse protection: 125 A • Control voltage: 24 V DC • Control • Control system: Siemens Sinumerik 840D (CNC) with TRUMPF TASC3 laser control • Control software version: 2.4 • Laser performance • CW mode power: • 100%: 3208 W • 85%: 2756 W • 75%: 2407 W • Pulsed (5 kHz) power: • 100%: 3208 W • 75%: 2416 W Bedpfsyzymgox Af Rolh • 50%: 1610 W • 25%: 810 W • 10%: 328 W • 5%: 157 W • 1%: 0 W • RF/drive • Reflected RF power: 0.3 kW • Maximum CW RF amplitude: 100% • Switching frequency (CW): 50 kHz • Maximum pulse voltage: 10,000 V • Pressure and leakage • Operating pressure limits: 20.01–27.00 kPa • Maximum turbine pressure: 200 hPa • Leakage rate: 0.04 hPa/min • Thermal/CPU • Maximum CPU temperature: 49 °C • Actual CPU temperature: 43 °C • Optics/Alignment • Maximum beam alignment time: 600 s • Hours • Laser on hours: 65,000 h Additional equipment • RIEDEL chiller (cooling system) (2001), Type: L 15/21 TR3 • Supply voltage: 400 V • Phases: 3-phase • Frequency: 50 Hz • Nominal current: 42 A • Protection class: IP54 • Refrigerant: R134a • Refrigerant charge: 11.5 kg • Maximum water pressure: 20.2 bar

Condition: ready for operation (used), Year of construction: 1988, A Bekum injection blow molding machine without molds is available. Industry: pharmaceutical, product: plastic bottles, operating bottle volume: 10ml, production capacity: 10ml: approx. 4800pieces/h, materials: PE/PP, machine dimensions X/Y/Z: approx. 6250mm/2200mm/2200mm, weight: approx. 12000kg. The rotary drive of the rotary table appears to be worn out. The injection cylinder of the unit is leaking and further leakages are present. An on-site inspection is possible. Expected to be available from July 2026. Bsdpsyz Ap Djfx Af Relh

Year of construction: 2024, condition: new, Working space 1100 x 660 x 816 mm (W x D x H) Blasting chamber Dust-tight vacuum cabin in stable sheet steel construction Bjdpsh Hxubefx Af Rslh Working gloves special rubber, wear resistant, cotton inside, firmly connected to the cabin against dust leakage Doors Blasting chamber W x D x H = 1100 x 660 x 816 mm Two side doors, dust-tight closing, double-walled, sound-absorbing foam, lockable, with electrical shut-off safety device Blasting media recovery Via coordinated MHG recovery system Operation ON/OFF switch for suction and lighting, pressure regulator, manometer and foot switch Viewing panels