Used Weber Mt Vibratory Rammer Srv 300 for sale (14,775)

Condition: excellent (used), Year of construction: 1983, operating hours: 87,618 h, functionality: fully functional, machine/vehicle number: DS 85610, overall weight: 4,000 kg, total length: 5,200 mm, total width: 1,700 mm, total height: 2,500 mm, power: 75 kW (101.97 HP), input voltage: 380 V, input frequency: 50 Hz, input current: 160 A, Original WEBER 8.8 extruder with extended barrel to model 8.22. Comes with new and original screws from Weber. HMI control panel, previously used in a cleanroom environment. Includes hopper. Machine is offered as is. Rjdpfx Ajx Apckemmeu

Condition: good (used), functionality: fully functional, Offered for sale is a Weber derinder, model AS 450, 400V / 16A / 0.4kW. The machine is fully functional and immediately ready for operation. Cutting width approx. 39 cm. New blade installed. Inspection and trial run possible. Six machines available in total. Further details on request. Rjdpfeya H Hcex Ammsu Payment by cash or advance bank transfer. Sale to commercial buyers only, no warranty or guarantee.

Condition: excellent (used), Mitutoyo contour&roughness measuring machine Formtracer CS 3000 H4 in very good condition measuring ranges: Z = 5mm (stage 350mm) X = 100mm Machine was completely overhauled und got a used PC (new installed) and nearly new software Formtracepak 5.3 Rsdpfxjp Ecg Rj Ammou Overhauled measuring table (50x100mm) and self centering vice for € 2.000,-- on demand. Included are a lot of measuring tip (new price appx. € 3.000,--) Optionally we offer installation, calibration and softwaretraining Price is for delivery inside european union

Year of construction: 1994, condition: used, weight 2,2 t extruder diameter x mm x +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++ Rsdsx U A Iaspfx Ammeu

Condition: good (used), Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, tilt cylinder, lifting cylinder, tie rod cylinder, tilt cylinder -Manufacturer: Weber Hydraulik, hydraulic cylinder tilt cylinder stroke 110 mm Rodpfx Amsv Tahijmeu -Type: Clark 4334896 -Piston rod: Ø 35 mm / M30 -Dimensions: Ø 88 x 420 mm -Weight: 8.7 kg

Condition: good (used), Joint cutter, asphalt cutter, concrete cutter -Saw blade: Ø 360 mm Rodedp Dvtepfx Ammeu -Cutting depth: 120 mm -Engine: Robin EH25D 8 hp -Dimensions: 1200/500/H950 mm -Weight: 100 kg

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -single-acting cylinder -Cylinder: Ø 100 mm Rsdeb A I Hiepfx Ammou -Piston rod: Ø 48 / Ø 36 mm -Pipe outer diameter: mm -Stroke: 500 mm -Total length when retracted: 570 mm -Ideal for building a hydraulic press -Number: 8 available -Price: per piece -Weight: 10.5 kg/piece

Condition: good (used), Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump, hydraulic lifting kit -Manufacturer: Weber, hydraulic pump hand pump with cylinder -Pump: Type ERGS 40-150 -Pressure range: max. 650 bar -Cylinder: stroke 155 mm Redpfx Amew Dbkremeu -Lifting capacity: 8 t -Hole: Ø 20 mm -Quantity: 2x set available -Price: per set -Dimensions: 740/220/H140 mm -Weight: 11.1 kg/piece

Condition: good (used), Floor cutters, asphalt cutters, concrete cutters -without: saw blade and cable -Saw blade: Ø 360 mm -Cutting depth: 120 mm -Motor: Robin EH25D 8 HP -Dimensions: 1200/500/H950 mm -Weight: 100 kg Redpjdp Dvpjfx Ammeu

Year of construction: 2000, condition: used, Vibrating plate, vibrator, vibration plate, soil compactor, construction vibrator -Manufacturer: Weber, vibratory plate type TC 66 S -Motor power: 6.3 kW -forward/backward- lever position reversed Rodpfehx E Ukjx Ammju -Engine: Hatz small diesel engine type 1D41S -Operating weight: 430 kg -Dimensions: 900/580/H1450 mm -Total weight: 454 kg

Year of construction: 1983, condition: good (used), This WEBER extruder is in machine storage at Plastima Used Machinery. The machine is from 1983 and is in fine condition. - Brand: Hans Weber GmbH Rjdpfx Amoq Tr Tbomeu - Model: ZE 30 - Year built: 1983 - Single-screw extruder - Screw Ø: 30 mm - Ratio: 20 L/D

Condition: good (used), Year of construction: 2024, Welding turntable KT 300 Load horizontal 300 KG, tilted 150 KG Power consumption 220V, 50 Hz table diameter 450mm height 500mm Tilt range stepless via crank gear motor 0 - 90°. Rodobvk I Ejpfx Ammsu speed 0,3 - 2,5 rpm Incl. foot remote control Surcharge: Quick release - jaw chuck diameter 300mm, 450.-€

Condition: new, Year of construction: 2024, load capacity: 300 kg, Equipment: foot remote control, rotational speed infinitely variable, Protec KT 300 H welding turntable, 170/400 special version Horizontal load 300 kg, tilted 150 kg Power consumption 220 V, 50 Hz Table diameter 450mm Hollow shaft diameter 170mm Table height 500mm Welding current transmission 400 A Quick-action chuck diameter 300mm, surcharge 550.-€ Rsdpfxjvbrqxj Ammsu Quick-action chuck diameter 400mm, surcharge 750.-€ Crank gear motor 0 - 90° stepless adjustment Infinitely variable speed 0.01 to approx. 5 rpm. incl. foot remote control Digital display with welding time limiter (if required)

Condition: new, Year of construction: 2024, load capacity: 300 kg, Protec KT 300 H welding turntable, 170/400 special version Horizontal load 300 kg, tilted 150 kg Redpfsrypmvsx Ammju Power consumption 220 V, 50 Hz Table diameter 450mm Hollow shaft diameter 170mm Table height 500mm Welding current transmission 400 A Quick-action chuck diameter 300mm, surcharge 550.-€ Quick-action chuck diameter 400mm, surcharge 750.-€ Crank gear motor 0 - 90° stepless adjustment Infinitely variable speed 0.01 to approx. 5 rpm. incl. foot remote control Digital display with welding time limiter (if required)

Condition: good (used), Year of construction: 2008, travel distance X-axis: 1,100 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 32 m/min, rapid traverse Y-axis: 32 m/min, rapid traverse Z-axis: 32 m/min, rotational speed (max.): 10,000 rpm, Control system: Heidenhain iTNC 530 Technical specifications: Travel distances: X-axis: 1,100 mm Y-axis: 610 mm Z-axis: 610 mm Rapid traverse (X/Y/Z): 32 m/min Feed rate (X/Y/Z): 12 m/min Distance table surface – spindle nose: 120 – 730 mm Maximum speed: 10,000 rpm Torque: 332 Nm Drive power: 13 kW Tool holder: SK 40 Rsdpfxox Hfnmj Ammju Tool positions: 30 Table dimensions: 1,250 x 610 mm Maximum table load: 900 kg Connected load: 35 kW Machine weight: 7,500 kg Chip conveyor Internal coolant supply (ICS): 22 bar Coolant tank capacity: 250 liters Air through spindle center

Condition: used, Year of construction: 2005, functionality: fully functional, overall weight: 250 kg, volume flow: 300 m³/h, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Vacuum pump, Rietschle SMV 300m3/h, 0.2bar /ct1928/ Redpfx Amjt A Ukasmju Manufacture: Rietschle Thomas (DE) Type: SMV 300 Year of manufacture: 1998 Operating pressure: 200Mbar Motor: 7.5 KW Capacity: 300 m3/h Power: 7.5 KW, 690/400 Volt Inlet: diameter 60mm Spout opening: diameter 38mm

Year of construction: 2017, condition: excellent (used), Bluhm weber legi-air 4050 labeling machine More pieces in stock! year built: 2016-19 Print resolution 8 dots/mm (203 dpi) 12 dots/mm (300 dpi) 24 dots/mm (600 dpi) Print speed Up to 400 mm per second Tamp sizes (mm) Tamp-Blow standard of 12.5 x 7 to 160 x 300 mm, label lengths must be limited in accordance with label quality, longer or smaller labels are possible using special tamps Label gap Minimum 3 mm Label roll 300 mm diameter, up to 450 running meters, core 76 mm (3"), outside winding (optional inside winding) Data interfaces RS232, RS422, RS485, Ethernet Optional: Profibus Dimensions (L x H x W) 770 x 560 x 580 mm, Applies to system with 250 mm stroke Display controller Multi-language operator guidance 5.7" VGA touch display Service interval indicator Polling, editing and saving of label data Redpfx Aefp A I Ejmmsu USB connection for memory medium or keyboard Compressed air connection 6 bar, the compressed air must be clean, dry and oil-free

Condition: good (used), Year of construction: 2002, overall weight: 110 kg, type of input current: three-phase, input voltage: 400 V, fuel: domestic gas H, input frequency: 50 Hz, Equipment: type plate available, For sale in excellent condition HOVAL HG-E 300-1650kw industrial gas burner with control, DUNGS assembly manufacturer HOVAL HG-E 140 year of manufacture: 2002 heating output min.-max. 300–1650 kw gas type: natural gas Gas flow min.–max. [Stm3/h] 32–174 Gas pressure 90-220 Mbar DUNGS MB-DLE 420 B01 S22 Gas multiblock gas regulator Tightness checker Dungs VPS-504 S02 Dungs LGW 50A pressure switch Electrical connection 400v 3-phase 50Hz Total energy consumption 2.7kw Fan motor: 2.2kw Protection IP40 Flame tube diameter: 230mm flame tube length: 260mm Redpfx Aovmhq Eommju Gas connection: Rp 2 - DN65 - DN80 Two-stage / two-stage sliding / modulated regulation machine length: 1100mm width: 700mm height: 500mm Dc200Rj weight 110 kg

Year of construction: 2021, condition: new, Motor-driven upper beam and bending beam Rodpohzr Swefx Ammeu Oversized chain transmission Electronically adjustable top beam strength Prepared for mounting a back gauge Foot pedal control with emergency stop Self-lubricating bearings and guides Adjustable scale reading for the correct bend angle. Drive motor 0.75 kW Dimensions 3750x650x1100 mm Weight 1540 kg Plate width 3020 mm Plate thickness 1.0 mm

Year of construction: 1991, operating hours: 102,364 h, condition: good (used), This extrusion line from Hans Weber GmbH is in machine storage at Plastima Used Machinery. The line is from 1991 and is in used but good condition. - Brand: Hans Weber GmbH - Model: WEBER DS 6.5 - Year of construction: 1991 Rodjqpft Iepfx Ammju - Screw Ø: 65 mm - Working hours: 102.364

Condition: excellent (used), • Manufacturer: ABUS KG – Germany • Type: K-300 1-4 • Motor power: 3.8 kW • Power supply: 400 V / 50 Hz • Equipped with an electromagnetic brake – braking torque 90 Nm • Gear shaft – diameter approx. 34 mm • Mounting: square flange • Robust industrial design, dedicated for use in ABUS cranes and hoists • Condition: used, fully operational (actual photos) Rjdpfexbfutsx Ammsu

Condition: used, mileage: 1 km, power: 9 kW (12.24 HP), axle configuration: 4x4, gearing type: automatic, Year of construction: 2013, GVW: 587 kg Please contact Emal Jaweed for more information Rsdpfjx R T Icjx Ammju

Condition: new, functionality: fully functional, Year of construction: 2025, Postmaster MINI – Hydraulic Vibrating Block The Postmaster Mini can be mounted directly onto a machine, ranging from 1.5 to 3 tons, and drives posts into the ground up to 150 mm. Oil supply required is 30-40 l/min. The Postmaster is faster, quieter, and safer than conventional machines on the market. A unique clamping system holds the post in position and vibrates it into the ground with minimal damage. Thanks to this vibrating action, the Postmaster can also be used to extract posts from the ground. Ideal for both wooden and steel posts and especially suitable for installing solar parks. • Faster • Safer • Quieter • Removes posts from the ground • Minimal ground disturbance • Firmly secured The Mini is the smallest unit in the range and weighs just 160 kg. Its compact design and light weight make it safe for use on smaller excavators without compromising stability. This unit is an ideal partner for short runs, limited access, and rapid repairs. Also available in Midi and Maxi versions. Rsdpfx Aew R Uqkjmmsu Optional CW 05 top plate.

Year of construction: 1989, condition: good (used), Power trowel, concrete trowel, screed trowel Rodpjb A Hdfefx Ammju -without a flat iron -Weight: 60 kg

Condition: good (used), Year of construction: 1990, loading capacity: 2.000 Kg. diameter of decoiler: 1.400 mm Redoid Sgmjpfx Ammou outside diameter of coil: max. 1.300 mm inside diameter of coil: min. 400 mm hight of the coil: max. 800 mm