Used Weinig Unimat 300 for sale (13,543)

Condition: used, Year of construction: 1969, Used machine Year of manufacture: 1969 Runs perfectly Max. working width: 170 mm Max. working height: 130 mm 1st shaft: bottom 2nd shaft: right Hnedoxavtqepfx Akreu 3rd shaft: left 4th shaft: right 5th shaft: top Availability: short-term Storage location: Röllbach

Condition: excellent (used), Compact High Speed Planing Line Mechanisation with Stacker 1. Weinig EM814 moulder infeed with flat chain feeder 2. Weinig 820 high speed right angle moulder outfeed with cross feed sweepers 3. Weinig 811 board stacker with scissors lift (chain feed discharge options) Hsdpfoxb U Txox Akrenu -Boards are automatically transported laterally with the Weinig 820 right angle transfer. -Boards automatically form a layer and are then placed on the lifting table of the chain conveyor -The completed pack is transferred to the following chain conveyor -Maximum output: 40 cycles/minute for stacker (over 150m/min based on average length boards). -Space required: Length approx. 8000 mm, Width approx. 5000 mm approximately -Pack size max 6100mm x 1200mm x 1200mm(high) 3. Weinig cross chains after scissors lift to move full packs away from the stacker when full. Possible to supply with Weinig Hydromat moulders 100m/min as needed.

Condition: excellent (used), High speed moulder infeed comprising a freestanding flat magazine in front of a high speed moulder. The infeed magazine is driven by hydraulic motors powered by an 5.5kW hydraulic unit (max 140m/min). Hnedpfowgbxzsx Akrju A buffer of feedstock is alligned laying flat side by side on the chain cross feeder. The chain feeder transports parts across to the fence. The part next to the fence is detected by a light beam and the the first roller is raised to allow entry and the transport roller then pushes the workpiece under the feed rollers of the planer. The first feed roller of the planer needs to be freewheeling roller to allow operation of the EM814.

Condition: good (used), Year of construction: 1981, Chain width: 340 mm Cutting height: 200 mm 2 x 45 kW motors Shaft diameter: 65 mm Hnodpjxiu Dmefx Akrou Electric height adjustment Feed speed variably adjustable via frequency inverter Includes an additional 3 saw bushings and many spacer rings Still ready for demonstration in a small business; technically flawless condition, but has not been in use for quite some time

Condition: used, Second-hand hydro planer head for the professional, machine-based processing of solid wood, wood-based materials and other suitable materials using back-toothed blades. Technical data: - Cutter: RVZ Z4 - Cutting circle (ø): 150 mm - Bore: 50 mm - Marking: MEC - Length: 150 mm - Material: Steel - Clamping: Hydro Hjdpfx Ajzymivskronu

Condition: used, Year of construction: 2008, WEINIG OptiControl 970090 tool measuring station, net price €7,650 Specifications: Tool diameter min. 90 Tool diameter max. 300 mm Tool length 0 - 240 mm Hnsdpfx Aszvpw Iskrou Radial measuring range (radius) 150 mm Non-contact measurement of tool dimensions, radius (R) and height (H), with display on electronic digital displays. Electronic digital displays providing information on tool radius and height. HSK63 tool holder for PowerLock tools. NEW: PowerLock adapter HSK63, shank D=50 x 260 mm.

Condition: used, Year of construction: 1997, Profiling line, consisting of DEP Gabbiani + Weinig planing machine DEP Manufacturer: Gabbiani Hjdpfx Akezuzfborsnu Type: T-Module 80/1600 Year of manufacture: 1997 Planing machine Manufacturer: Weinig Type: 22 BL Year of manufacture: 1995 Technical data of the DEP - 6 machining motors per side - 2 fixed scoring units, 3.2 HP / 3000 + 4500 RPM - 2 chip-removing units: 12.5 HP / 3000 + 4500 RPM - 2 chip-removing units: 12.5 HP / 3000 + 4500 RPM - 2 slotting units: 12.5 HP / 3000 + 4500 RPM - 2 free spaces - 1 feed motor: 4 HP / 1400 RPM Angle transfer between DEP and planing machine - Length: 290 - 1600 mm (1800 mm) - Width: 18 - 150 mm - Thickness: 5.5 - 50 mm - Density: 600 kg/m³ - Output max.: 150 workpieces/min - Belt conveyor after the double-end profiler - Toothed belt conveyor with brush attachment as counter holder - Cam conveyor for singulation - Toothed belt conveyor as buffer section - Longitudinal discharge - Roller conveyor before the planing machine - Control: Vipa, compatible with Siemens S7 300 - Safety technology Protective door switches: 3 Safety light barriers: 1 Technical data of the planing machine Working width and working height - Working width: 20 - 230 mm (with tool diameter 125 mm) - Working height: 9 - 140 mm (with tool diameter 125 mm) Infeed table - Length: 2000 mm - Adjustment range of the jointer table: 10 mm - Adjustment range of the fence: 10 mm Surfacing table - Length: 1200 mm - Adjustment range of the table: 10 mm - Adjustment range of the fence: 10 mm Jointer spindle - Motor power: 5.5 - 15 kW Thicknessing spindle - Motor power: 5.5 - 11 kW Left spindle - Motor power: 5.5 - 11 kW 2. Right spindle - Motor power: 5.5 - 11 kW Top spindle - Motor power: 5.5 - 22 kW Bottom spindle - Motor power: 5.5 - 22 kW Universal spindle - Motor power: 5.5 - 11 kW Feed - Cardan feed, continuously adjustable: approx. 6-36 m/min - Motor power: 4 - 8.6 kW Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 1998, Four-sided planing machine Manufacturer: Weinig Type: P 23 E Year of manufacture: 1998 Technical data - Working width: 230 mm - Working height: 8-120 mm Hjdpfszuzfusx Akrjnu - Number of spindles: 5 (top, right, left, bottom, top) - Spindle speed: 6000 rpm - Feed rate: 5-24 m/min - Total connected power: approx. 25 kW - Infeed table: approx. 2000 mm - Weight: approx. 2500 kg Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: excellent (used), Catalog number 7961 TECHNICAL DATA - track width 250mm - roller width 250mm - max. disc diameter 350mm - disc bore diameter 70mm - max. cutting height 100mm - table width with clearance 940mm - table length 1700mm - from above: - pawls/ejectors - pressure roller, metal, smooth - roller with saws - pressure roller, metal, smooth 2 pcs - from below: - guide - pawls/ejectors - sliding roller, smooth - track - central lubrication Hnodpfx Akszxqqbjreu - feed motor 4kW - main motor 37kW - stepless feed speed adjustment - manual body lifting - manual roller with saws lifting - diameter of dust extraction nozzle 200mm - overall dimensions L/W/H of the machine 1800x1500x1700mm - weight 1956kg ADVANTAGES – German made – stepless feed speed adjustment – multi-blade saw, used, very good condition Net price: 22900 PLN Net price: 5326 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to higher fluctuations)

Year of construction: 2012, condition: used, X: 550 mm, Y: 350 mm, Z: 400 mm, Ra ≈ 0,07 μm Tel Erezyon Makinesi (Wire Hsdpfxezxrh Ue Akrenu EDM)

Condition: like new (used), Year of construction: 2022, functionality: fully functional, type of input current: three-phase, cutting height (max.): 100 mm, cutting width (max.): 1,140 mm, saw blade diameter: 300 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, actuation type: electric, rotational speed (max.): 7,000 rpm, total length: 1,700 mm, total width: 1,130 mm, total height: 1,100 mm, overall weight: 400 kg, Equipment: CE marking, documentation/manual, saw blade guard, Professional panel saw SICAR SEGA 300, manufactured in 2022. The machine is equipped with a 1600 mm long aluminum panel carriage, a scoring saw, and a tilting saw unit. The robust construction, based on a cast iron table and a heavy-duty saw unit, ensures stable operation and high cutting precision. The saw is designed for processing solid wood, furniture boards, MDF, plywood, and other wood-based materials. TECHNICAL DATA: - Manufacturer: SICAR / MA.CO.2L - Model: SEGA 300 - Year of manufacture: 2022 - Panel carriage length: 1600 mm - Carriage dimensions: 1600 × 315 mm - Main saw blade diameter: 300 mm - Main saw blade arbor diameter: 30 mm - Scoring saw diameter: 90 mm - Scoring saw arbor diameter: 22 mm - Main saw blade speed: 4500 rpm - Scoring saw speed: 7000 rpm - Maximum cutting height at 90°: 100 mm - Maximum cutting height at 45°: 75 mm - Saw unit tilting range: 0–45° - Maximum cutting width with parallel guide: 1140 mm - Main work table dimensions: 800 × 500 mm - Auxiliary table dimensions: 800 × 860 mm - Auxiliary side table dimensions: 400 × 500 mm - Main motor power: 4.0 kW / approx. 5.5 HP - Power supply: 380 V, 3 phases - Frequency: 50 Hz - Machine weight: 380 kg - CE marking Hsdpjzxw N Rjfx Akrsnu EQUIPMENT: - aluminum panel carriage running on ball bearings - scoring saw unit with belt drive - manual lifting and tilting of the saw using knobs - parallel guide on a steel shaft - cast iron guide bracket with micrometer adjustment - extendable crossbeam - cross guide with two reversible stops - saw blade guard with extraction port - emergency stop switch - complete set of auxiliary tables as shown in the pictures The machine is in very good visual condition. Compact and robust panel saw suitable for both a carpentry workshop and the production of custom-made furniture. The machine is available immediately. It is possible to start and inspect it before purchase. We offer assistance with loading and the possibility of arranging transport throughout Poland and abroad. JBS WOODWORKING MACHINERY Sale of used and new woodworking machines. It is possible to view the machine in operation by prior appointment. It is possible to test the machine on site. Financing options are available through leasing or installment plans. WE ORGANIZE TRANSPORT WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl

Condition: excellent (used), functionality: fully functional, mileage: 34,000 km, power: 219.91 kW (298.99 HP), first registration: 10/2010, fuel type: diesel, overall weight: 14,500 kg, tire condition: 95 %, axle configuration: 4x2, wheelbase: 3,600 mm, next inspection (TÜV): 11/2026, fuel: diesel, color: red, driver cabin: other, gearing type: automatic, suspension: steel, number of seats: 9, total length: 7,750 mm, total width: 2,500 mm, total height: 3,200 mm, Equipment: ABS, additional headlights, airbag, differential lock, fog lights, parking heater, trailer coupling, truck registration, Iveco 160 E HLF 20, superstructure by MAGIRUS AF 3 Road-going 4x2 drive Crew cab for 1 + 8 personnel Rear axle differential lock 2000 l water tank and 150 l foam tank Pump, 2000 l/min, manufactured by MAGIRUS Pneumatic lighting mast at the rear of the superstructure Area lighting Camera system Storage for electrical equipment/lighting PA system storage/backrests in the cab Special paint job, red/yellow Extendable hygiene board Martin fanfare system Front strobe lights Auxiliary heater Electric exterior mirrors Roof storage for extension ladder and 3-part sliding ladder Tool deployment panel Rear warning system Tire chains for rear axle Euro 5 engine One-person hose reel system L/W/H: 8200x2500x3100 mm New inspections (MOT/emission test/safety inspection) available upon request for an additional charge Price available upon written request Hnsdpfxezx D Nwo Akrou Sale without any included equipment -Sale only to authorities and businesses- (no sale to private individuals) Sold as a used vehicle without warranty.

Condition: as good as new (ex-display), Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! CAN SHARPEN MAX 406MM DIAMETER CUTTERS !!! The G-716 Semi-automatic Cutterhead Grinder is used to sharpen 178mm to 406mm diameter eased edge, milled to pattern, and fingerjoint cutterheads. Worktable traversing is automatic and has adjustable stops. Cutterhead indexing is manual. Each knife is held against a positive stop while being ground !!! No Index Plate To Change No index plate to change when working with heads with different numbers of knives. The use of an index plate assumes that the knives and head separations are uniform throughout, which is often not the case. If the height of the knife is high or low, then the front face of the knife will vary from knife to knife making the task of grinding difficult. The one constant is the back face of the knife, therefore the use of an indexing stop against the back face will provide for accurate indexing regardless of the irregularities in the knives and head slots. Head Indexing and Wheel Feed: Manual Minimum / Maximum Diameter Cutterhead: 7″ Min./16″Max. 178mm Min./ 406mm Max. Worktable Feed: Air / Oil Travel (maximum): 12″ 305mm. Adjustable Limits: Proximity Switch Speed: Fully Adjustable Index Method: Manual index after each knife is ground. Grinding Spindle: 1-1/2 HP Wash Down Duty TEFC Motor 3600 RPM, Dual ABEC 7 Precision Bearings, with Sealed Lubrication. 8″ (203mm)Diameter Grinding Wheel (9″ 229mm Diameter Max.) Coolant System: 15 Gallon Tank with Casters, Sediment Tray Full View Sight Glass, 5 GPM Pump (120VAC) Wash Down Hose Included Specifications Grinds 7″ to 16″ diameter eased edge, milled to pattern, and finger joint heads Automatic traversing worktable with adjustable travel limits Manual indexing of knives against a positive stop with grinding position pneumatic brake allowing precision indexing without the need of an index plate High precision 1-1/2 HP grinding spindle with sealed lubrication Recirculating adjustable flow flooded coolant system with wash down hose Hjdpsq Dzi Tjfx Akrenu Fully enclosed grinding chamber with viewing windows and task light Grinding wheel feed allows unattended operation. New Proscale.

Condition: used, Twin band saw Raimann B110 Duo Hnedpsdfc Shsfx Akreu Roll diameter 1100 mm Roll width 100 mm Feed rate 0-40 m/min

Condition: like new (used), 300 linear meters of Nedcon pallet racking New, see pictures! A top-quality racking system from the renowned manufacturer NEDCON – a subsidiary of Voestalpine AG with headquarters in the Netherlands. Height: 6.5 m Depth: 110 cm, blue Beam length: 2.7 m, orange Beam capacity/bay: 3050 kg Negotiable price: €50,280.00 net ex warehouse Offer includes: + 108 pcs. pre-assembled frames, depth 110 cm, height 6.5 m + 642 pcs. beams, length 2.7 m, 3050 kg capacity/bay + 1284 pcs. safety locking devices + 216 pcs. concrete anchors Load capacity labels, documents, etc. are, of course, included. Further accessories can be found in the accessories catalog. Frames: blue RAL 5019, infill panels: galvanized. Heights from 2 m to 7 m in stock. Bay load: 12 tons, higher bay loads available upon request. Beams: orange RAL 2008. Beam lengths: 1.85 m, 2.7 m, 3.3 m, 3.6 m in stock. Goods are in stock. Transport and assembly are available upon request. Other configurations available upon request. Over 2000 meters available. Inspection possible at any time by appointment. Further information available upon request. We always have over 5000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications, and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT ex warehouse) Lenox Trading – Top used & new storage technology & heavy-duty racking Description: Are you looking for high-quality storage racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers of new and used storage technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ PROMPTLY AVAILABLE: • Over 10,000 linear meters of racking available for immediate delivery • 20,000 m² of mezzanine floors & steel platform structures immediately available • 30–50 semi-trailer loads of goods handled weekly for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether it's pallet racking, heavy-duty racking, high-bay racking, shelving, tire racking, or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, disassembly and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Jungheinrich heavy-duty racking) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND BUSINESS: ONLINE AUCTIONS & LIQUIDATION For disassembly and clearance orders, we offer a comprehensive, worry-free package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete stock, including thorough clearance. 2. Commission-based auction: Conducting auctions on behalf of clients. Our full-service approach with our own employees: Cataloging, office preparation, inspection, goods delivery, logistics, dismantling, and thorough handover. Whether you found us through heavy-duty racking or are looking for galvanized heavy-duty racking/heavy-duty racking systems, we guarantee the best conditions. Contact us for a non-binding offer! Hsdpfxsfi U Afj Akrsnu

Condition: good (used), Raimann K12 Multi-blade saw Chain with spike Chain width 430mm Cutting height approx. 120mm Hnodpfed Scdqsx Akrsu Includes various accessories.

Condition: reconditioned (used), functionality: fully functional, 430 mm chain width Hsdpfx Ast Aad Sjkrsnu 120 mm Cutting height 55 KW saw motor infinitely variable feed speed Machine workshop checked Machine cleaned and repainted

Condition: excellent (used), Year of construction: 2005, Weinig Dimter OptiCut S 90 optimizer with 2 ejectors – after technical review – German production – year of manufacture 2005 TECHNICAL PARAMETERS: max. length of cut material 4500 mm max. width 360mm max. height 160mm automatic length measurement optimization in 4 quality classes total power 13 kW blade motor power 7. 5 kW pneumatic side and top pressure disc diameter max. 500mm OptiCom Assist control receiving conveyor 5600 mm two ejectors total length 13 m component marking printer cutting accuracy +/- 0.5 mm transport dimensions (length / width / height) 600 / 240 / 190 cm weight ~ 1800 kg Hnjdpfx Aji Apgmjkrsu

Year of construction: 2010, condition: good (used), Weinig GRECON TURBO S finger jointing line - German production - DTR, CE - year of manufacture 2010 - high efficiency up to 200 elements / min - 28 km / 8h TECHNICAL PARAMETERS: Wood parameters - width 60 - 225 mm Hnedpfsin Uulox Akreu - thickness 18 - 48 mm - length 300 - 2000 mm - pressing length 8100 - 16400 mm - power consumption 150 kW - air consumption 3100 Nl/min - suction capacity 14845 m3/h - two milling stations - undercutters - connecting with a dash and a zigzag - loading with a conveyor with spacers - package width 600 mm - divided ironing length Folded machine dimensions - length 42000 mm - width 6000mm - height 2100 mm

Condition: excellent (used), Raimann KS 310 BV edger multisaw - year of manufacture 1995 - German production - DTR - two movable discs TECHNICAL PARAMETERS: - track width 340 mm - cutting height max 120 mm - engine power 30 kW - disc diameters 250/360 mm - Possibility to put on a shoe - electric height adjustment - feed continuously adjustable 11-38 m / min - power of the feed motor 1.5 kW - two movable discs - three lasers - max element width 1000 mm - minimum element length 600 mm with a shoe 400 mm - four upper pressure rollers - spindle diameter 65 mm - sleeve diameter 80 mm Hnsdpoir Eubjfx Akrou - spigot diameter 250 mm Dimensions 230x220x230 weight 2500 kg

Condition: good (used), Technical data for the shelf connector: Shelf system: Bito Included in the scope of delivery: 01 x shelf connector, used Material color: Sendzimir galvanized Overall length: approx. 300 mm Center-to-center distance of holes: approx. 260 mm Profile dimensions: L 50 x 50 mm Hnsdpfx Asig Hv Uokrsu Material thickness: approx. 2.00 mm Weight/piece: approx. 0.437 kg

Condition: excellent (used), Year of construction: 2004, Weinig Dimter Opticut 200 Classic optimizer - after the technical review - year of production 2004 - declaration of conformity, DTR - German production TECHNICAL PARAMETERS: min./max. entry length of the element 800/3500 mm min./max. entry width of the element 80/200 mm min./max. element input thickness 12/80 mm type of wood hard / soft dash cutting wood classification max. feed speed 120 m / min acceleration 5 m / s saw blade diameter fi 500 mm saw hole diameter 30 mm saw spindle speed 4600 U / min duration of 1 cycle 0.7 - 1.2 sec a powered conveyor at the entrance and a marking station with side tables for two markers conveyor belt Hnodpjgz Tbdefx Akrju total power 15 kW length measurement - fluorescence camera for 3 qualities receiving station - conveyor belt full optimization total length 8300 mm stub diameter 80 and 120 mm OptiCom Direct control power supply 400 V / 50 Hz

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, operating hours: 4,452 h, cutting height (max.): 120 mm, cutting depth: 340 mm, main saw diameter: 380 mm, Raimann KR 310 E 340/120 multi-saw with movable disc - manufactured in Germany - year of manufacture 1990 - DTR - number of hours 4452 h Hnsdpfx Aksrhig Eerou TECHNICAL PARAMETERS: - track width 340 mm - cutting height max 120 mm - cutting height with movable disc 85 mm - engine power 30 kW - minimum length of the element 700 mm - width of table 740 mm - feed regulated on inverter 6-48 m/min - three rows of pawls - possibility to mount a bush - sleeve diameter 80 mm - length of fixed sleeve 190 mm - electrical adjustment of cutting height - electrical adjustment of shaft height - four top pressure rollers - automatic central lubrication - laser - ruler - spigot diameter 250 mm Overall dimensions of the machine 250x200x220 cm weight 2000 kg

Condition: excellent (used), Weinig LTB250/3500G belt lifter Length 3500mm Width 250mm Hjdpfx Asu Eclrskrenu Speed 22m/min

Condition: excellent (used), Year of construction: 2012, Weinig H1000 moulder with E3 infeed and A3 outfeed mechanisation Weinig Hydromat 1000 with 5 Spindles. (Year 2012) Separate electrical panel Separate remote control panel Automatic lubrication system for bedplates Memory system Full sound enclosure Hnjdpfx Ajx Rbkxekrou Weinig E3 moulder infeed +pack scissors lift (3000kg). Weinig A3 drop leaf outfeed + pack scissors lift (3000kg) + pack outfeed chain conveyor. WEINIG HYDROMAT 1000 230X160mm maximum dimension No 1. 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer No 2. 7.5kw - Right 6000rpm + profile jointer No 3. 7.5kw - Left 6000rpm + profile jointer No 4 . 7.5kw - Top 6000rpm + Outboard bearing + Straight jointer No 5 . 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer 50mm spindles Beam 0.55kW Full documentation included. Extraction manifold included. POSSIBLE TO PURCHASE MOULDER OR MECHANISATION SEPARATELY AS NEEDED