Used Wmw Thread Tapping Machine for sale (74,222)

Condition: good (used), Stock No.: 3099 Manufacturer: WMW Auerbach Pgedpfjy R S U Usx Ai Tsu Year of manufacture: 1962 Machine number: 545 Type / Model: FW 160 Travel (x-y-z): 425 - 140 - 315 mm Table: 630 x 160 mm Clamping area: 530 x 120 mm Speed range: 85 to 2,800 rpm Spindle taper: SK 40 Feeds: 5 to 250 mm/min Rapid traverse: 2,500 mm/min Power connection: 2.3 kW Accessories/Equipment: Condition: good Weight: 0.85 t Dimensions: 1,000 x 1,000 x 1,450 mm

Condition: excellent (used), workpiece diameter (max.): 30 mm, spindle diameter: 54 mm, roll diameter: 125 mm, spindle speed (max.): 224 rpm, spindle speed (min.): 40 rpm, roll width: 70 mm, Excellent Used Profiroll Bad Duben Model UPWS 10 ton Hydraulic Thread Rolling Machine with swivelling spindle for in-feed and thru-feed rolling Max rolling diameter: 30mm - Max thread length infeed rolling: 70mm - Max thread length thru-feed rolling: infinite Podoymlx Dopfx Ai Tegu Dia. of rolling spindles: 54mm - Max size of thread dies: 125mm dia x 70mm wide - 4 spindle speeds 40 to 224 rpm

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: M14E/9142, Offer Number: M14E/9142 Machinetype: flat die thread rolling machine Info: with washer assembly Make: TLM Type: RP10 Constr. year: 1992 Pgsdsy Dc Ekopfx Ai Tju diameter range: 10 mm shaft length under head: 100 mm max. thread length: 60 mm output - pieces/min: 320 Location: Europe

Year of construction: 1990, condition: used, spindle taper 2 x SK 40 forward bearing diameter 110 mm milling head speed 100 - 4500 U/min milling drive 5,1 kW workpiece length - max. 830 mm workpiece dia. with double equipment max. 135 mm taper diameter 78 g6 mm centre height 260 mm turning speed range - stepless max. 15 U/min distance of spindles 135 mm spindle nose DIN 55026 Gr. 5 stroke of workpiece slide 810 mm Feed speed max. 6 m/min. surface area 200 x 1750 mm stroke of tool slide 120 mm Feed speed max. 2 m/min. column movement 200 mm tailstock quill stroke 100 mm morse taper 3 MK centre height 260 mm axial distance of the quills 135 mm passage of steadyrest 40 - 80 mm Podoyt Rwrjpfx Ai Tjgu control SIEMENS SINUMERIK 810 weight of the machine ca. 6,5 t with SIEMENS-control SINUMERIK 810/820 acc.: NC-dividing unit with back stop, various toolholders, steadies, running centres, coolant

Year of construction: 1996, condition: good (used), machine/vehicle number: xxxx, High-performance table-mounted threading drill machines with T-slot table Pjdpfx Aijf Tcy Ds Tsgu Technical specifications: - Threading capacity approx. M3 - M16 - Speed range up to 500 rpm - Working area (swivel radius) 2500 mm - Quick-change tool holder, size 2, diameter 31 - Various inserts for quick-change tool holder - Table surface with 5 T-slots 2050 x 900 mm - Table height 910 mm - Machine vise with jaw width 200 mm - 3-jaw chuck 250 mm - Pneumatic connection with pressure reducer - Mobile base - Space requirement approx. W 2400 x H 2000 x D 1000 mm - Weight approx. 1100 kg

Condition: good (used), Year of construction: 1990, Thread cutting machines with accessories Manufacturer SONE Type: 2000 . 230V . Psdpfsvk D Rpex Ai Tjgu

Condition: good (used), Rolling pressure 220 kN Ø Pieces 3mm min; 70mm max Pitch 6mm max Grooving pitch 2.25mm max Roller width 160mm max Ø Roller 133mm min; 170mm max Roller shaft speed 24 30 38 45 62 72 90 114 rpm Ø Roller carrier shaft 54mm standard; 69.85 special Distance between shafts 135mm min; 230mm max Pgodjvyyyxepfx Ai Tsu Working stroke 15min max Feed rate 0.5mm/s to 6mm/s Laminating time 0.1s to 100s Pause time 0.1s to 100s Main motor 5.5 Kw Electrical power consumption 8.6 Kw Tank capacity 130 L Weight approx 2100 Kg

Condition: excellent (used), Year of construction: 1983, TOYOSK 01CC-T 36-spindle Thread cutting machine with fixed spindle and Pgodpfx Aiswh Sh Ne Tsu Manufacturer: TOYOSK Type: 01CC-T Year of manufacture: 1983 Number of spindles: 36 Three-speed gearbox: 520rpm, 850rpm, 1330rpm Application: Simultaneous drilling of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings)

Condition: used, TECHNICAL DETAILS - Part diameter : 100 [mm] - Nominal module * gear hobbing : approx. 3.0 [mm] Pgodpfxex Ed A Ro Ai Tou * endless screw milling : approx. 5.0 [mm] - Max. axial movement : 320 [mm] - Cutting head orientation : -45 / + 115 [°] - Main mill max. diameter : 118 [mm] - Max. cut out length of the mail mill : 180 [mm] - Max. mill movement (Shifting) : 160 [mm] - Max. part-holder spindle speed : 3000 [t/mm] - Min./max. distance between axes : 10/100 [mm] - Cutting head motor power : 14 [kW] - Main mill speed : 50-12000 [t/mm] - Weight : 5000 [kg] EQUIPMENT - CNC Siemens 840D - Cooling tank - Chip conveyor

Condition: used, thread dia. 3 - 10 mm Tools speed 120 - 600 U/min table-size 250 x 350 mm Podpfx Ajlwlk Aei Tsgu throat 250 mm voltage 380 V threading length 80 mm total power requirement 0,55 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 0,7 x 0,7 x 1,9 m

Condition: used, Thread cutter, tapping machine, tapping machine Pgodpjd R Nfqjfx Ai Tsu -Nominal consumption: 280 watts -Max. Cutting capacity: M8 -Connection: 220 volts -Dimensions: 290/200/H60 mm -Weight: 2.1 kg

Condition: good (used), Year of construction: 1989, Offered from an insolvency sale is a ready-to-use thread drilling machine. Manufacturer: Flott Model: SB 15 GL Year of manufacture: 1989 Machine No.: 34177063 Technical data: Cutting capacity: M2-M12 Arbor: MK 2 Quill stroke: 80mm Overhang: 200mm Chuck: Bilz WFP 1 + inserts Drill chuck: Röhm 0-10mm Foot switch Digital display for quill stroke Single-cycle operation Emergency stop Spindle speeds: 80-3150 rpm 380 Volt Motor power: 0.75 kW Max. distance between table and arbor: 380mm Overall height: approx. 1700mm Pjdpfxsfm S Nao Ai Tegu Accessories: 8 pcs. lead screws – pitches: 1.5 – 1.25 – 1.75 – 0.8 – 0.7 – 0.5 – 0.45 – 1.0 Operating manual Weight: approx. 200 kg

Condition: good (used), Year of construction: 1982, number of straightening rollers: 13, straightening roller diameter: 145 mm, bale length: 2,330 mm, Year of construction / YOM: 1982/2024 Sheet width: 2000 mm Sheet thickness - max.: 10 mm Pgedpfx Aie Afxcis Teu Sheet thickness - min.: 3 mm Number of straightening rollers: 13 rollers Straightening roller diameter: 145 mm Straightening speed: 16 m/min Bundle length: 2330 mm Center distance between straightening rollers: 150 mm Support roller diameter: 290 mm Main drive motor: 30 kW Weight: 32 t Additional information: - Number of support rollers: 21/24 - Number of supports (top/bottom): 3 /3 - Traverse lift speed: 0.71 mm/sec - Traverse lift stroke: -18 mm to +42 mm - Max. tilting of lower traverse: 8 mm

Condition: new, metric thread diameter (min.): 3 mm, metric thread diameter (max.): 24 mm, Model RE16 to M16, model RE24 to M24 - ball bearing mounted wear-free parallel arm with radii of 1270 or 1800mm Pedorb Akmepfx Ai Togu - Connection 230V / 1Ph - Infinitely variable speed adjustment - Digital speed display - digital depth control with memory for 5 programs - quick-change holder according to DIN standard Options: Micro spray system for model 1800 Cast iron table Wheels for cast iron table Multifunctional head for cutting at any angle

Condition: used, Year of construction: 1986, workpiece diameter 460 mm Pgodpst H Smtofx Ai Tju threading length 900 mm thread pitch 100 mm total power requirement 10 kW weight of the machine ca. 8 t dimensions of the machine ca. m

Condition: used, Thread rolling machine, cold rolling machine, thread forming machine, profile rolling machine Manufacturer PEE-WEE, Type P 24 Q Serial No. LC2403099, Year of manufacture 2004 Rolling force, max. 24 tons Tool diameter, max. 200 mm Rolling spindle diameter 69.85 mm Tool bore diameter 70 mm (nominal diameter) Receiving length, tool length, max. 180 mm Workpiece diameter, max. 50 mm Pgsdpfsh A S Htsx Ai Tsu Rolling spindle speed 22 - 44 - 95 - 190 RPM Hydraulic motor power approx. 3 kW Rolling drive motor power 5.5 kW Mains connection 400 Volt, 50 Hz - Swiveling rolling spindle for thread through-rolling - Rolling spindle speed in 4 stages via gear change - Hydraulic system integrated in the machine bed Space requirement L x W x H 2000 x 1750 x 2550 mm Weight approx. 3 tons Good condition Plunge rollers: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating the workpiece up to the nominal diameter. The thread length is a maximum as long as the rolling tools are wide. Through-rolling tools: If the thread length is greater than the rolling tool width. Through-rolling tools have 3 sections - the inlet, the calibrating section, and the outlet. Grooved rollers have no pitch and are swiveled with the helix angle of the profile to be rolled. Helix rollers differ from grooved rollers by having a pitch in the profile. The sum of the helix angle and the swivel angle results in the helix angle in the workpiece.

Condition: excellent (used), thread dia. 36 mm Psdpoyhq S Eefx Ai Togu

Condition: new, thread dia. M6 - M24 mm turning speeds 200 U/min radius 1200 mm angle adjustable from - to 0 - 90 Grad weight of the machine ca. 0,4 t dimensions of the machine ca. 1,4 x 0,1 x 0,7 m Electric tapping machine / 4450124SET Fast and precise thread cutting with freely positionable swivel arm - The machine head can be swiveled from 0 to 90 degrees - Quick change chuck with slip clutch for safe thread cutting without Risk of breakage - Right-left rotation can be selected on the machine head Pedpjg N Nl Djfx Ai Tjgu - Setting the parameters via touch display on the swivel arm - Both manual and automatic switching from forward to backward to reaching the entered Incl. 1 each GT24 M6, M8, M10, M12, M14, M16, M18, M20, M22-24 tapping chuck Substructure 900 x 600 x 875 mm

Condition: used, Table-top thread cutting machine M1 - M10 Height adjustment via rack and pinion and hand crank Motor 0.22 + 0.32 kW Motor RPM 1420 / 2770 Spindle RPM 480 - 580 Weight 100 kg Tapping chuck with key Base Pjdpfx Aeda I E Dsi Tsgu Connection cable with 16 A CEE plug

Condition: new, Year of construction: 2024, thread dia. bis M 16 mm turning speeds 0 - 600 U/min thread M5 - M16 working area 2050 Rmax. Pgedou Ag Rajpfx Ai Tju working area 500 Rmin. table surface area 900 mm engine output 3,0 kW weight ca. 250 kg

Condition: used, Year of construction: 1985, functionality: fully functional, machine/vehicle number: M14I/9063, Offer Number: M14I/9063 Machinetype: thread rolling machine - flat die Info: vibratory feeder Make: HILGELAND Type: FL-10-80 Constr. year: 1985 diameter range: 10 mm shaft length under head: 180 mm max. thread length: 80 mm output - pieces/min: 400 Location: Germany Pgsdpfx Aoxnyrtoi Tju

Condition: ready for operation (used), Bobbin winding machine MARTINI, various models in good condition, immediately available. Pedpfx Aieg Ntkqj Tegu

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK 800x500 mm Layout Workbench The CORMAK 800x500 mm layout workbench is a solid and functional solution designed for professionals involved in precision tapping operations. It is perfectly compatible with electric tapping machines and tapping arms, ensuring stability and comfortable operation in every industrial workshop. Its construction has been designed for intensive use, offering excellent quality, ergonomics, and user convenience. Thanks to innovative design solutions, the workbench enables efficient tapping processes while ensuring high precision and reliability for many years of operation. Psdpfx Aijvugu Ee Tegu Main advantages of the CORMAK 800x500 mm layout workbench High precision: The workbench is equipped with T-slots spaced 152 mm apart, allowing accurate tool positioning and providing ideal conditions for precise tapping operations. Solid construction: Made of durable materials, the workbench ensures stability and long-term reliability during intensive use, which is essential when working with electric tapping machines and tapping units. Ergonomics and working comfort: The table provides an optimal working height of 760 mm and a spacious tabletop measuring 800 × 500 mm, ensuring comfortable operation and reducing operator fatigue during long tapping processes. Mobility: Equipped with lockable wheels, the workbench can be easily moved around the workshop, allowing flexible adjustment of the working area according to current needs. Functionality: The integrated tool cabinet provides quick access to necessary accessories, improving workflow efficiency and speeding up tapping operations. Design and technology of the CORMAK 800x500 mm layout workbench The CORMAK 800x500 mm layout workbench has been designed with durability and precision in mind. The tabletop, manufactured from materials resistant to intensive use, provides excellent rigidity and stability during operation with tapping machines and electric tapping units. T-slots with dimensions of 3 × 14 mm and a spacing of 152 mm allow secure and precise tool positioning, resulting in high-quality threaded holes. The workbench construction ensures full functionality, enabling convenient handling of workpieces of various sizes. The workbench is equipped with a practical tool cabinet that allows quick storage of accessories, improving workplace organization. Built-in lockable wheels provide mobility, allowing easy movement around the workshop while maintaining stability during tapping operations. Standard equipment of the CORMAK 800x500 mm workbench Tool cabinet: Provides convenient storage of accessories, improving organization and working comfort. Lockable wheels: Allow easy movement around the workshop while ensuring mobility and flexibility. Worktop: Dimensions of 800 × 500 mm and thickness of 50 mm provide excellent rigidity and sufficient workspace for various materials. T-slots: Enable precise positioning and guidance of layout and machining tools. Technical specifications of the CORMAK 800x500 mm layout workbench Parameter Value Tabletop dimensions 800 × 500 mm Table height 760 mm Tabletop thickness 50 mm

Condition: used, Threading machine, pipe threader, Ridgid 300, used machine Manufacturer: Ridgid Type: 300 Overall dimensions: Width: 1180 mm Depth: 1250 mm Height: 1500 mm Electrical data: 230V Podsybbamopfx Ai Togu Functions: Thread cutting, cutting to length, deburring

Condition: used, Year of construction: 1973, functionality: fully functional, machine/vehicle number: M14L/8559, Offer Number: M14L/8559 Machinetype: thread rolling machine - flat die Info: vibratory feeder Make: MENN Type: GW62 Constr. year: 1973/92/23 diameter range: 3-8 mm shaft length under head: 80 mm max. thread length: 55 mm output pieces/min: 300 Pjdpfxowi Sxwe Ai Togu Location: In our warehouse