Used Wp Dk 100 for sale (28,321)

Condition: used, CTS Type: TSS-70/130 Water-cooled cooling unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/130. The device is used for performing temperature shock tests and is typically used in industry, research, and quality assurance. Application areas: Material tests Aging tests Electronics and component tests Temperature shock and cyclic temperature tests Technical data: Type: TSS-70/130 Test volume: 130 liters Itjdpfxjy Hkd He Ag Aen Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from room temperature to +180°C Cooling rate: approx. 4 K/min from room temperature to -60°C Temperature deviation: ±1 K in time ±2 K spatially Temperature change rate: max. 100 K/min on average for shock test tests without heat input Temperature adjustment rate: ≤ 15 min in the range of -65°C to +200°C with 10 kg of ICs Cycle time: < 10 seconds Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 17.2 kW Rated current: approx. 29 A On-site protection: 32 A slow-blow fuse Connection: Cekon 32 Refrigeration system: Refrigerant: R404A / R23 water-cooled, low-noise, fully hermetic Equipment / Features: CTS control panel Microprocessor-controlled control and monitoring system Program operation up to 100 test programs possible digital setpoint and actual value display RS232 interface 2 free switching channels for on-site control of the test specimen Fault message on potential-free contact Load up to 30 V DC, 2 A EMC tested Technical design: Hot and cold chamber Mobile frame with lifting spindle drive Test chamber / mobile frame made of stainless steel, material no. 1.4301 Insert basket made of stainless steel wire Pipe passage NW 50 with sealing plug Compressed air connection 1/4" AG Condensate drain non-pressurized R 1/2" internal thread Safety door lock lockable door with window Dimensions according to installation diagram: External dimensions approx.: 2335 x 940 x 1820 mm Loading dimension approx.: 1990 x 940 x 1652 mm Test chamber dimensions: height approx. 410 mm Width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Other data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh For your safety as a buyer, the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: see pictures (Changes and errors in technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Feutron Type: 3702/06 Water-cooled climate testing chamber Technical data: Test chamber nominal volume: 2.0 m³ Isdpezd Sdmefx Ag Aetn Dimensions: Test chamber exterior, with humidifier console Width: 2970 mm, Height: 2370 mm, Depth: 1530 mm Rear wall Minimum insertion dimensions: Width: 2970 mm, Height: 2390 mm, Depth: 1550 mm Test chamber: Width: 2000 mm, Height: 1000 mm, Depth: 1000 mm Door: double-leaf, clear opening width: 2000 mm, height: 1000 mm Viewing window: heated, 2 pieces, width: 500 mm, height: 600 mm Feedthrough opening: 1 piece, left side wall, diameter: 75 mm Temperature range: -40...100°C Climate range: 10...95°C Temperature difference, over time: ≤ ± 0.5...± 1.0 ΔN/K Rate of change measured in the supply air, without load Cooling: up to 2.0 K/min on average Heating: up to 2.0 K/min on average Humidity range: 10...95 % r.h. Humidity difference, over time: ≤ ± 3.0 % r.h. Dew point range, intermittently: -5...95°C Refrigeration system: water-cooled, semi-hermetic Bitzer system Refrigerant: R507 (Μ-Κ1) Climate and drying refrigeration system: air-cooled / hermetic system Refrigerant: R134a (Μ.ΚΚ) Power supply: Electrical connection: 400V 3/N/, 50Hz Power plug: CEE 5-pole, 32 A, with 5.0 m cable Max. simultaneous power consumption: 10.0 kW Supply line fuse: 3x 25, Char, C A Protection class: IP20 Weight: 1300 kg Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: ready for operation (used), Indramat KDS 1.1-100-300-W1 AC servo controller, serial number as shown in the photo, used, professionally and completely refurbished and tested, with a 12-month warranty, 100% functional, scope of delivery as shown in the photos. Itedpfxoi Ebhho Ag Ajn

Condition: ready for operation (used), Indramat KDS 1.3-100-300-W1 controller, serial number: 253759-02028, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Itedpji Ebibjfx Ag Ajn

Condition: ready for operation (used), Indramat KDV 1.3-100-220/300-W1 power supply, serial number SN23226473930903, professionally and completely overhauled and tested, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photo. Isdpfx Agoi Ebi As Ajtn

Condition: ready for operation (used), Indramat KDV 2.2-100-220/300-220 power supply, serial number as shown in the photo, professionally and completely refurbished and tested, with a 12-month warranty, 100% functional, scope of delivery as shown in the photos. Itsdpei Ebi Uefx Ag Aen

Condition: new, Indramat KDV 2.2-100-220 / 300-W1 power supply, serial number: 234691-00754 A08R1, unused, in open original packaging, 100% functional. Scope of delivery as shown in the photos. Itodpfx Aei Ebi Rog Aen

Condition: new, Baumüller DSG 100-K servo motor, serial number: 20521958 + DG 66 ANC encoder + DGS 67 A5B encoder, unused with signs of storage, 100% functional, scope of delivery as shown in the photos. Itsdpoi D E Dvefx Ag Aon

Condition: ready for operation (used), Brinkmann TC 25 / 810+100 submersible pump, serial number: 0313002815-19535001, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Itodpfxei D Hmhs Ag Aon

Condition: new, GMN TSE 100cg-6000 / 1.25 high-speed spindle, serial number: R358699, unused, 100% functional, scope of supply as shown in the photos. Iodpfx Aei D U U Tsg Aetn

Condition: new, GMN TSE 100cg-6000 / 125 high-speed spindle, serial number: R358399, unused, in open original packaging, 100% functional, scope of delivery as shown in the photos. Itodpfxsi Eaabj Ag Aon

Condition: used, Palox tipper 120 x 100, made of standard black steel Itodpfx Agexn U Nme Aen

Condition: good (used), mileage: 138,165 km, power: 125 kW (169.95 HP), first registration: 11/2021, fuel type: diesel, tire size: 235/65R16, axle configuration: 4x2, wheelbase: 3,670 mm, fuel: diesel, color: grey, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, total length: 6,120 mm, total width: 2,020 mm, total height: 2,690 mm, loading space length: 3,300 mm, loading space width: 1,780 mm, loading space height: 1,910 mm, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking heater, power mirror, tachograph, traction control, trailer coupling, = Additional Options and Accessories = - Halogen lamp - None Ijdszwldgjpfx Ag Aotn - Manual - Radio/cassette - Rear view camera - Fabric - Partition = Notes = Configuration: 4x2, Payload: 1209 kg, Tare weight: 2291 kg, Gross vehicle weight: 3500 kg, Towing capacity, unbraked: 750 kg, Towing capacity, middle axle, braked: 2000 kg, Tow hitch, Type of cab: Single cab, Cruise control, Tachograph, Air conditioning, Number of airbags: 2, Auxiliary heater, Parking assistance: None, Electric windows, Electric mirrors, Partition, Radio/cassette, Carplay, GPS navigation, Color: Grey, Rear view camera, Type of lighting: Halogen lamp, Air conditioning, Bluetooth, Engine power: 125 kW (168 hp), Number of cylinders: 4, Displacement: 1950 cc, Fuel: Diesel, Euro: 6, Drive technology: Timing chain, Type of transmission: Automatic, Power steering, ABS, ASR, Starter battery, Body type: extended and raised, Side paneling, Rear step, Roof rack: None, Side doors: 1, Side windows: 1, Rear closure: Double door, Workshop equipment, Central locking, Number of seats: 2, Seat arrangement: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual, L2H2 RWD LED lighting, Navigation, Tow hitch, Camera, MBUX, Automatic transmission, Cruise control, Euro 6, 170 hp!, Spare wheel, Tire type: Winter tires = Additional Information = General information Number of doors: 1 License plate: V-89-RGD Axle configuration Tire size: 235/65R16 Brakes: Disc brakes Suspension: Leaf spring suspension Axle 1: Tire tread depth left: 5 mm; Tire tread depth right: 5 mm Axle 2: Tire tread depth left: 6 mm; Tire tread depth right: 6 mm Weights Unladen weight: 2,291 kg Payload: 1,209 kg GVW: 3,500 kg Functional Loading area height: 68 cm Maintenance APK (Technical inspection): valid until 11/2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 4 Financial information Leasing price: €538 per month (delivery van, 72 months); Please inquire about further information and conditions.

Condition: used, Year of construction: 1997, operating hours: 13,410 h, load capacity: 1,600 kg, lifting height: 4,310 mm, free lift: 1,405 mm, fuel type: electric, mast type: triplex, battery capacity: 1,000 Ah, battery voltage: 24 V, fork carriage width: 1,000 mm, fork length: 1,100 mm, overall weight: 3,000 kg, total height: 2,000 mm, total length: 3,000 mm, total width: 1,050 mm, No. 04537 Electric front forklift Steinbock Boss LE 16-100 MK V A-1 Used, year of manufacture 1997 Approx. 13,410 operating hours Rated load capacity 1600 kg at a 500 mm load center distance Triplex lift mast Lifting height 4310 mm Free lift 1405 mm Hydraulic mast tilt Fork length 1100 mm Itodpfx Agoz S U S Uj Ajn Fork carriage width approx. 1000 mm Fork adjustment manually adjustable Superelastic tires (SE) Power steering Electric drive, infinitely adjustable Direction switch on the steering column Driver protection roof Driver's seat with seat belt Rearview mirror Headlights Emergency stop switch Battery data according to nameplate: 24 V / 1000 Ah Including automatic charger miditron B, 24 V / 200 A Vehicle length without forks approx. 1800 mm Transport dimensions approx. 3000 x 1050 x 2000 mm LWH Weight approx. 3000 kg To avoid any possible misunderstandings, an on-site inspection is possible and recommended after prior appointment Sale is made in the current condition Technical data, condition description, year of manufacture and scope of delivery according to the manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, all warranties are excluded; the condition "sold as seen" applies Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex warehouse

Condition: used, functionality: fully functional, Year of construction: 2017, machine/vehicle number: 2460348, power: 1.5 kW (2.04 HP), load capacity: 200 kg, lifting height: 7,850 mm, platform length: 1,110 mm, platform width: 930 mm, overall weight: 2,650 kg, fuel type: electric, tire size: 0,41 x 0,13 m, color: red, Equipment: UVV, Manitou 100 VJR Telescopic Mast Lift Technical Specifications: * Working height: 9.90 m * Platform height: 7.90 m * Load capacity: 200 kg * Overall width: 0.99 m * Overall length: 2.82 m * Overall height: 1.99 m * Weight: 2,650 kg Ijdeyqyg Dopfx Ag Astn Equipment: * Proportional control joystick * Drive possible at maximum outreach * Audible warning signal and indicator light for tilt and overload * Integrated battery charger * Manual emergency lowering * Negative brake * Audible warning system in the work basket * Hour meter * Battery charge indicator * Crane lugs * Integrated diagnostics system * Non-marking tires * Work platform with anti-slip perforated floor * CAN-BUS technology * Toolbox in the work basket Optional features available: * New CE inspection (UVV) * Removal of our company decals * Custom paintwork and decals on request * New batteries * Warranty * New service * Delivery within Germany

Condition: used, functionality: fully functional, Year of construction: 2016, machine/vehicle number: 2460068, power: 1.5 kW (2.04 HP), load capacity: 200 kg, lifting height: 7,850 mm, platform length: 1,110 mm, platform width: 930 mm, overall weight: 2,650 kg, tire size: 0,41 x 0,13 m, color: red, transport length: 2,800 mm, transport width: 990 mm, transport height: 1,990 mm, Equipment: UVV, Technical specifications Year of manufacture: 2016 Motor: Electric (2 x 1.5 kW) Itjdpfx Aoyqzfbjg Aen Working height: 9.85 m Platform height: 7.85 m Max. lateral outreach: 3.15 m Basket capacity: 200 kg Upper carriage rotation: 350° Platform dimensions (L x W): 1.11 m x 0.93 m Overall dimensions (L x W x H): 2.80 m x 0.99 m x 1.99 m Boom length: 1.50 m Weight: 2,650 kg Climbing ability: 25% Travel speed: 0.65 km/h - 5 km/h Fully operational, general signs of use

Condition: used, Piston rod, Ø 60 x 1195. Isdpfxsz Tr Hfj Ag Ajtn

Condition: used, Upright frame SR 100/20 H4400xW100xD800mm, silver, galvanized. Iedpfx Aoz Trb Nog Astn · For pallet racking systems · Galvanized design · Ground anchors are included in the scope of delivery.

Condition: used, Lateral guide, type ZF 100, 90-degree curve, galvanized on both sides. Iedpjz T Dt Djfx Ag Aetn * Galvanized C-profile * For handrails up to a guide height of 100 mm * Adjustable * Further technical features: surface: galvanized * Curve: 90°

Condition: used, Diameter: 10 mm Weight per meter: 0.45 kg/m MBK (Minimum Breaking Force): 97 kN Construction: SC Number of wires in outer strands: 114 Strength class: 1960 DIN 3058 Iodpjz T Antofx Ag Astn Material: Steel, IWRC steel core Strand direction: right or left Ends/Fixed length: Loop, crimped / Pointed Length: 100 m

Condition: used, Upright frame SR 100/20 H3800 x W100 x D1100 mm, silver, galvanized. · For pallet racking · Galvanized finish · Floor anchors are included in the scope of delivery. Ijdpez Twu Iefx Ag Ajtn

Condition: used, Lateral guidance, type ZF 100, track length 3m, galvanized on both sides. * Galvanized C-profile * For handrails up to a guidance height of 100 mm * Adjustable Itodpfxoz T D Smj Ag Asn * Other technical characteristics: Surface: galvanized

Condition: used, AB90 88x88x65mm, thickness 2.5mm · For cross-connections made of wood · For connections of rafters to purlins and purlins to wooden beams · Steel, hot-dip galvanized · Isosceles Itjdpfsz Txp Hox Ag Aon · Angle 90° · Further technical specifications: Surface: hot-dip galvanized · Dimension c: 65mm · Design: isosceles · Dimension a: 88mm · Dimension b: 88mm

Condition: used, Puller 20-10, clamping range 100mm, clamping width 120mm, 4.5 t, KUKKO · Two-arm design · With sliding puller hooks that remain parallel at all times · Made of special steel · With a robust spindle for high pulling force and a crossbeam with high bending strength · Puller hooks with large contact surfaces for gentle pulling · Optimal adjustment of the spindle to the shaft through a 2-sided spindle tip (ball and point); by repositioning the arms, the puller can also be used as an internal puller Application: universally applicable, for removing ball bearings, bearings, gears, etc. · Can be used as an external and internal puller by reversing the puller hooks · Also suitable for removing asymmetrical workpieces Itodpfjz Tyl Nsx Ag Aon · Other technical specifications: weight: 1.42 kg · Material: special steel

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with joint milling unit including DIA tools, joint thickness up to 40 mm, workpiece thickness up to 3 mm, combined milling station, radius R 2.5 mm. Technical description: with hot melt adhesive application to the workpiece for edge material up to 3 mm. 60 mm workpiece thickness without joint unit, 40 mm workpiece thickness with joint unit, maintenance-free, coated adhesive reservoir, HF trimming station (16,000 rpm) for front and rear edge overhang, HF milling station (16,000 rpm) with replaceable blade milling cutter (combined design) and fine milling adjustment from the operator side, free spaces for additional processing units (Hebrock system), feed rate approx. 10 m/min, cutting depth adjustment of the trimming saw, signal lamp for workpiece sequence, robust chain drive, ergonomically arranged control panel, double roller pressure beam, unit viewing windows from the rear and operator side of the machine, Itedpfsx S Hmzjx Ag Asn PLC control including touchscreen. Technical data: - Feed speed 10 m/min. - Board thicknesses from 8 - 40 mm - Weight: depending on the equipment, approx. 1550 kg - Dimensions (L x W x H) 5250 x 1445 x 1600 mm Airtronic incl. cooling and antistatic spraying device 2014, 1 unit Hot air unit for creating an optical zero joint using special edge materials designed for this purpose. - including pneumatic adhesive reservoir positioning - including cooling and antistatic spraying device - including 2 additional edge channels in quick-change design - including special version corner rounding milling cutter, maximum workpiece thickness 60 mm and minimum workpiece length 200 mm - exclusively for Hebrock edge banding machines of the 3000 series - retrofitting possible later - additional costs upon request Technical data: - max. board thickness 40 mm - max. edge thickness 1.2 - 2.0 mm - 7 - 10 m/min feed speed - Air consumption approx. 280 - 580 l/min (only Airtronic), electronically controlled - ready for operation after approx. 2 min Upgrade to 8 mm edge thickness, 1 unit, up to a maximum of 40 mm workpiece thickness including pneumatic saw adjustment special version, minimum workpiece thickness 8 mm, 1 unit 3-point pneumatic milling adjustment, 1 unit Switching between radius - chamfer - flush for the combined milling stations. This eliminates the manual adjustment at the combined milling station for the 3rd stop point. PLC control is essential. Cleaning station (wiper), 1 unit Corner rounding milling cutter, 1 unit, including combined tool and pneumatic adjustment for chamfer/radius, maximum workpiece thickness 40 mm, minimum workpiece length 300 mm, radius R 2.0 mm. Radius pull blade, 1 unit, including pneumatic feed device, radius R 2.0 mm. Flat pull blade, 1 unit, with pneumatic feed control. Chassis complete, 1 unit Adhesive station change system including adhesive outlet device downwards, in preparation, 1 unit, without 2nd adhesive reservoir. - including the possibility of processing PU adhesive with the machine Dado cutter unit, vertical, in the board, 1 unit, including pneumatic feed device. Vertical dado, groove width 8.2 mm, groove depth 8.0 mm, distance from the workpiece edge 14.0 mm Special version, dado cutter motor with higher motor power, 1 unit Internal extraction of the joint unit, 1 unit, at the extraction manifold of the machine Ball bearing for corner rounding milling cutter 24.1 mm, 1 unit Ball bearing for corner rounding milling cutter 24.2 mm, 1 unit Release agent spraying dev