Used Wp Dk 100 for sale (26,266)

Condition: used, Year of construction: 2001, Injection moulding machine Netstal synergy 600-100, year of manufacture 2001 Year of manufacture: 2001 Control system: Netstal Sycab Clamping force [kN]: 600 Screw diameter: 25 mm Core pull: 1 Integrated hot runner zones: 8 Total power [KW]: - Iedsxuq Urjpfx An Isbc Opening stroke [mm]: 340 Selection unit: yes Max. mould height [mm]: 500 Min. mould height [mm]: 200 Specific injection pressure [bar]: 2428 Max. shot weight [g for PS]: 47 Tie bar spacing [mm x mm]: 410/410

Condition: like new (used), Year of construction: 2016, IVECO EUROCARGO 100-19, year 2016, Euro 6, 330,000 km, refrigerated body, dimensions 5.80 x 2.25 x H2.30 (internal measurements), movable partition wall, dual evaporator, Carrier Supra 850 refrigeration unit, ATP FRC -20°, valid until 03/2028, independent diesel operation, DHOLLANDIA tail lift, air conditioning, manual transmission. Financing or leasing options available on-site. Ibodpfxjz Ny H Sj An Ijc

Condition: good (used), Ruhle Model MR 100 380V Ibedjz N A Rmepfx An Iec with 4 blades

Condition: used, Manufacturer: Heraeus Model: NTU 100/50 Ijdpfxez I Rbij An Iebc Max. temperature: 250°C Internal dimensions: 1000 x 1500 x 1000 mm Weight: 690 kg

Condition: good (used), Year of construction: 2020, pressure (max.): 10 bar, noise level: 68 dB, Double-piston compressor with dryer Brand: KAESER Model: KCT 401-100 Year: 2020 Type: Double-piston and oil-free (dry-running) Pressure: 10 Bar Flow rate: 275 Liters/min. Power: 2.4KW (3.2Hp) Iedsz E R Dxopfx An Ijbc Tank: 100 Liters Sound level: 68dB Three-phase 380V - Suitable for continuous use: Unlike conventional piston compressors, the KCT series compressor blocks from Kaeser are designed for a 100% duty cycle. - Typical applications: Dentistry, laboratories, pharmaceutical sector, medical technology, food packaging, and the electronics industry where completely clean air is required according to ISO 8573-1 Class 0 standard. Air dryer: - Brand: Kaeser - Model: TAH7 KRYOSEC - Single-phase 220V - Flow rate: 600 Liters/min. - Environmentally friendly refrigerant: R-513A - Weight: 24Kg - Plate heat exchanger: Made of stainless steel with low pressure drop. - Integrated condensate drain: Equipped with an electronic condensate drain ECO-DRAIN as standard (does not lose compressed air during discharge). - Hot gas regulation: Prevents internal freezing when the unit operates at low air load.

Condition: used, Year of construction: 2022, functionality: fully functional, tooth pitch: 100 mm, grinding wheel diameter: 125 mm, grinding wheel bore: 20 mm, We offer this used Iseli Swiss BNF 100, a fully automatic 4-axis surface grinding machine, manufactured in 2022. Manufacturer: Iseli Swiss Model: Fully automatic 4-axis controlled flank grinding machine for band saws in wet grinding version / Type BNF100 Year of manufacture: 2022 • Flank grinding machine for set, as well as stellite and carbide-tipped band saws • Full enclosure with intensive water cooling • Equipped with a 4-axis CNC control system Iedpfx Aez E Spcon Iobc • Each movement is individually controlled via servo motors, resulting in minimal idle times • The advanced saw tooth can be finished in a clamped position • Electrically controlled, central saw blade height adjustment • Height stop for precise saw blade positioning • Use of roller linear guides for the CNC axes (stiffer machine construction and significantly increased service life) • Pneumatic saw blade clamping • Pneumatic additional clamping to stabilize thin saw teeth, resulting in increased dimensional accuracy • Operation via touch screen / color display • Data can be retrieved via the control system (standard storage space for 99,999 data sets) • Metric or Anglo-American measurement system selectable (mm or inches) + Dust extraction and auxiliary feed Technical data BNF100 Flank clearance angle: 0 - 7° Tooth pitch: 13 - 100 mm Blade width standard: 75 - 360 mm Blade width optional: 25 - 360 mm Blade length standard: from 5,300 mm Blade length optional: from 4,300 mm Grinding wheel variant 1: Ø 100 - 125 mm Grinding wheel variant 2: Ø 75 - 100 mm Grinding wheel bore: Ø 20 mm If you have any questions or need more information, please send us a message or call us.

Condition: used, mileage: 177,506 km, power: 103 kW (140.04 HP), first registration: 08/2010, fuel type: diesel, overall weight: 6,300 kg, next inspection (TÜV): 09/2027, color: blue, gearing type: mechanical, emission class: euro5, number of seats: 7, Equipment: ABS, central locking, soot filter, Iveco Daily 65C14 3.0 DK Tipper, 1st owner, 177,000 km, valid until 09/2027 EQUIPMENT Standard equipment: Driver-side airbag, Anti-lock braking system (ABS), Traction control system (ASR), Drive type: Rear-wheel drive, Model: C-series, Exterior mirrors, electrically adjustable and heated, Long exterior mirrors, for vehicle width 2350 mm, Electronic brake force distribution, Electronic stability program (ESP), Tachograph, Front axle suspension: Torsion bar spring, Electric windows, Tinted windshield and side windows, Speed limiter 90 km/h, Cruise control, 6-speed transmission, Body/structure: Tipper, Double cab, Fuel filler neck in B-pillar (for standard cab), Fuel tank: 100 liters, Engine 3.0 liters - 103 kW diesel with catalytic converter, Fog lights, Radio preparation with speakers, Wheelbase 3750 mm, Diesel particulate filter, Low emissions according to Euro 5 emission standard, Headlights H4, Seats in the cab: Passenger double seat, Seats in the cab: Driver's comfort seat (hydraulic), Immobilizer, Central locking, Permissible total weight 6.30 t etc. Appointments and test drives by telephone arrangement. The information provided on the internet is a non-binding description. It does not constitute a guarantee of properties. The seller is not liable for typing and data transmission errors. Subject to change and prior sale. Ijdpfx Ajz I Ht Ion Iobc

Condition: used, Year of construction: 2000, functionality: fully functional, power: 14 kW (19.03 HP), cutting width (max.): 3,800 mm, Equipment: CE marking, Giben Prismatic 2 SP H.100, year 2000 for sale! Working width 3800 mm Number of grippers 6 Ijdpfx Anoz H H U No Iobc Saw blade projection 100 mm Installed power: 14 kW

Condition: used, Year of construction: 1998, functionality: fully functional, Vibratory dryer WALTHER TROWAL G 100 B Year of construction: 1998 Ibsdpjz H Iw Eefx An Iec Bowl dimensions: Ø 1100 m x height 1100 mm Inside dimensions: width 200 mm x max height 300 mm Motor rotation: 1500 t/min. Motor power: 0,45 kW Max heating capacity: 3 kW In perfect working condition Weight: 250 kg

Condition: good (used), Year of construction: 1997, Transfer press REIS TUS 100-100, serial no. 02.246.00, year of manufacture 1997, pressing force 1,000 kN, weight approximately 8.5 t. Ibodpfx Asz Icbujn Ioc

Condition: used, Granulator / Granulators Brand: HERBOLD Model: SMS 45/100-H5-3 Semi-open 5x2 knife rotor, 2 stator knife rows. Machine is equipped with replaceable third bed knife (deflector) to handle thick-walled materials. Infeed hopper for conveyor belt feeding. Rotor mounted outside the housing. Housing split in the middle, can be opened with a hand winch. Double inclined cut design: Rotor and stator knives are arranged opposite each other and cut like scissors. With base frame incl. vibration dampers. Machine data Rotor knives: 5 x 2 Stator knife rows: 2 Ibodpjz Hxcfjfx An Iec Drive: 75 kW

Condition: used, Year of construction: 2006, operating hours: 28,491 h, machine/vehicle number: 309, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,650 mm, travel distance Z-axis: 1,200 mm, controller manufacturer: Fanuc, controller model: 15i, workpiece weight (max.): 5,000 kg, table load: 5,000 kg, overall weight: 28,000 kg, spindle speed (max.): 6,000 rpm, operating hours of spindle: 29,840 h, coolant supply: 70 bar, spindle nose: BT50, number of spindles: 1, number of slots in tool magazine: 120, Equipment: chip conveyor, documentation/manual, MITSUI SEIKI 100 A Year of manufacture: 2006 Ibedpez Iyaujfx An Ijc 120-tool magazine, BT 50 Knoll high-pressure system, 2000 liters, 70 bar Chip conveyor Pallets, 1000x1000 mm NC table, 0.001° Linear scales in all axes Spindle speed: 6000 rpm Can be inspected while in operation.

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, overall weight: 109,000 kg, input voltage: 110,000 V, input frequency: 50 Hz, warranty duration: 24 months, nominal power (apparent): 100,000 kVA, nominal power: 100,000 kW (135,962.00 HP), secondary voltage: 33 V, temperature: 70 °C, empty load weight: 109,000 kg, input current: 530 A, type of output current: three-phase, output voltage: 33,000 V, Equipment: documentation/manual, type plate available, 110/33 kV transformer with 80 MVA capacity without forced air cooling and 100 MVA with forced air cooling, cooling type ONAF. Switching method: YNyn0+d. Ibodez Iycvspfx An Iec The transformer was intended for connecting a wind farm and a battery storage system, neither of which is currently being implemented. Therefore, the transformer is being offered at a price significantly below the purchase price. The transformer will be inspected and accepted on October 23rd/24th, 2026, in Ljubljana, Slovenia, at the manufacturer Kolektor ETRA’s testing facility.

Condition: good (used), Year of construction: 2016, Edge banding machine Manufacturer: Hebrock Type: AKV 3005 DK-F Year of manufacture: 2016 Total edge length processed: 88,570 m Isdpoz Hbqlefx An Iebc Edge thickness: 0.3 - 3 mm Workpiece thickness: 10 - 45 mm Feed rate: 10 m/min Total power consumption: 13.4 kW Overall length: 5,000 mm Gluing unit: Yes Trimming saw unit: Yes Radius flush trimming unit: Yes Corner copying unit: Yes Surface scraper blade: Yes Buffing unit: Yes

Condition: used, mileage: 4,884 km, power: 90 kW (122.37 HP), first registration: 08/2023, fuel type: electric, axle configuration: 4x2, wheelbase: 2,720 mm, fuel: electricity, color: white, gearing type: automatic, number of seats: 2, total length: 4,490 mm, total width: 1,860 mm, total height: 1,840 mm, Year of construction: 2023, Equipment: ABS, Android Auto, Apple CarPlay, Bluetooth, air conditioning, airbag, cruise control, electronic stability program (ESP), fog lights, full service history, onboard computer, power assisted steering, power mirror, sliding door, tire pressure monitoring, = Additional Options and Accessories = - Air conditioning - Rear parking sensors - Front parking sensors - Sliding door on the right side - Driver alertness system - Automatic headlight control - Heated exterior mirrors - Passenger airbag - Electrically adjustable exterior mirrors - Electronic brake force distribution - Driver airbag - Height-adjustable driver's seat Ibjdjz H T A Hjpfx An Isc - Height-adjustable steering wheel - Collision mitigation by braking - LED daytime running lights - Lumbar support - Multifunctional steering wheel - Radio - Radio with DAB - Rain sensor - Rearview camera - Immobilizer - Blind spot monitoring - Traffic sign recognition = Additional Information = General Information Number of doors: 4 Model range: Nov. 2022 - 2026 Cabin: single Technical Information Torque: 245 Nm Drivetrain Range: 293 km Performance Acceleration (0–100): 11.4 s Top speed: 135 km/h Dimensions Length/Height: L1H1 Weights Unladen weight: 1,583 kg Payload: 637 kg GVWR: 2,220 kg Max. towing capacity: 1,500 kg (750 kg unbraked) Battery Existing battery: Purchased Battery capacity: 44 kWh, Condition: 99% Charging port: Type 2 Suitable for fast charging: no Interior Interior: black Consumption Average energy consumption: 184 kWh/100km Maintenance, History and Condition APK (Technical Inspection): valid until 08.2027 Number of keys: 2 (2 remote controls) Product Safety Manufacturer: Oostland Automobielen Wasaweg 22 9723JD GRONINGEN, NL

Condition: reconditioned (used), Gostol Gopan SMH 100 spiral mixer with DP-6 ZA SMH bowl lift. Two mixing speeds: pre-mixing with counter-clockwise rotating bowl and kneading. Programmable mixing times. Simple operation via an electronic control panel for entering the kneading and mixing time. Dimensions (L × W × H): 1720 × 895 × 1380 mm Gross weight of the machine: 1110 kg Gross weight of the bowl with carriage: 250 kg Ibjdpoz Ia Nijfx An Ioc Used and refurbished. Manufactured in Slovenia. Price upon request.

Condition: excellent (used), Year of construction: 2007, Engel Insert 80V/80V/100 2F / 2-K tie-bar-less machine, vertical / Perfect technical condition Ibedpfx Ansz Ipn Io Iec Year of manufacture: 2007 Injection unit: Screw diameter: 2 x 25 mm Injection weight: approx. 49 g Injection pressure: 1214 bar Metering volume: 54 ccm Clamping unit: Clamping force: 100 t tie bar distance: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control unit: CC 200 Additional equipment: Tie-bar-less machine with two vertical injection units, with turntable. Air valve x 6 Hydraulic core puller x 2 Control system with hot runners x 12 Infrared protection curtains Thermoplastic and rubber injection units are available for this machine Turntable diameter: 1200 mm The machine has been regularly serviced by the authorized service Engel in Germany Dimensions: Weight: 9400 kg Length/width/height: 4.85x1.47x2.30 m Propulsion: Pumps/motor: 30 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2016, Arburg 570S 2200-290/100/100 / Production line with the Wittmann W823 robot / Operating hours: 20,499 h in automatic mode Year of construction: 2016 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Injection pressure: 2000 bar Metering volume: 144 ccm Clamping unit: Clamping force: 220 t Distance between tie bars: 570x570 mm Size of the clamping platens: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Iodpfx Anez Iqaxj Iobc Additional equipment: 3-component injection molding machine, high speed Very good technical condition Operating hours: 20,499 h in automatic mode Euromap 67 Robot interface Air valve x 6 Hydraulic, needle core pull, controlled by a proportional valve x 4 Control unit with hot runners Hardened injection unit - bimetal Proportional valve on the injection unit - precise injection Machine with two cylinders / battery with compressed nitrogen (additional charge for fast work) The machine is designed for operation with an electric turntable. The machine has an inverter to control the servomotor in the rotary table and an interface for connecting the rotary table Parallel movements Screw diameter in the vertical injection unit: ⌀25 mm - 45 g/hp Screw diameter in the lateral injection unit: ⌀25 mm - 45 g/hp Wittmann W823 robot Year of construction: 2015 5-axis robot: 3 axes are driven by servomotors (electric); axis C and movement A Travel in axes: X-550, Y-1400 (telescopic), Z-3500 Touch control panel The safety package for robots Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt for an additional charge Dimensions Weight: 10830 kg Length/width/height: 5.53x1.77x3.29 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: good (used), 5-axis clamping system ATORN 5 AX 100 Version 7.1 (2 pieces including base plate, can be used with zero-point clamping systems) Ijdpfez Huchex An Iebc - Jaw width: 100 mm - Clamping height: 250 mm - Clamping range up to 550 mm (reducible to 175 mm or 200 mm) In very good condition.

Condition: used, overall weight: 10,000 kg, axle configuration: 2 axles, first registration: 08/2019, loading space length: 8,900 mm, loading space width: 2,400 mm, Equipment: ABS, Vachal TA 100 Car Transporter Ijdpjz H D Elofx An Isbc For inquiries: 0425336 Condition: Very good Permissible total weight: 10,000 kg Weight: 3,360 kg ABS EBS Internal dimensions: Internal length: 8,900 mm, internal width: 2,400 mm Tires: 1st axle: 205 / 65 R17.5, 40% remaining, air suspension 2nd axle: 205 / 65 R17.5, 30% remaining, air suspension Price: 19,900 EUR + 19% VAT For further questions, you can reach us at the following telephone numbers: We speak: German, English, French, Polish, and Russian Typographical errors, errors, and prior sale are subject to change.

Condition: good (used), Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor, conveyor belt with vacuum connection -Belt conveyor: Vacuum section for suctioning the material to be conveyed -Belt width: 250 mm -Conveyor length: 2460 mm -Drive shaft: Ø 30 x 100 mm -Individual components: see photos -Dimensions: 2460/470/H300 mm Ibjdpsz Ehd Nefx An Ijc -Weight: 152 kg

Condition: excellent (used), Deckel Maho DMC 100V machining center Ibsdpfx Anoz Ehu Ue Ijc CNC control: Heidenhain Machine in good condition.

Condition: good (used), functionality: fully functional, Robust RAPID PK 100 table saw in a solid design, featuring a sliding table and adjustable fence system. The saw blade can be tilted up to 45°. With a saw blade diameter of 250 mm, the maximum cutting height is approximately 75 mm. The cutting width to the right of the saw blade is approximately 600 mm. The saw arbor is driven by a narrow V-belt. A saw blade is included in the scope of delivery. Technical data: Motor power: 3 kW Three-phase motor, protection class IP54 Motor speed: 2,860 rpm Saw arbor drive via narrow V-belt Saw arbor speed: 5,200 rpm Table size: approximately 850 × 700 mm Cutting width to the right of the saw blade: approximately 600 mm Cutting height: approximately 75 mm with a Ø 250 mm saw blade Saw blade can be tilted up to 45° Dust extraction port on the rear of the machine: Ø 100 mm Dimensions: approximately 800 × 1,200 × 1,400 mm Weight: approximately 250 kg Equipment: Sliding table Length/cross stop with scale Parallel fence Tiltable saw blade up to 45° Dust extraction connection Ø 100 mm Includes saw blade The machine can be inspected and tested under power after arranging an appointment. Transport is possible for an additional charge! Isdpfx Ajz Eh Nron Isbc The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information is without guarantee.

Condition: excellent (used), We are selling our pad printing machine from TampoMark. Manufacturer: TampoMark Type: TM-100 The TampoMark TM-100 is a pneumatic printing machine with an open ink system. Includes extensive accessories (in a box). Documentation available (operating manual). Ibsdpfx Aoz Hiuxjn Iec

Condition: used, Year of construction: 1995, functionality: fully functional, machine/vehicle number: 745-006-1, total height: 4,050 mm, ram adjustment: 60 mm, total width: 1,650 mm, total length: 3,000 mm, drop-through hole in table: 160 mm, pressing force: 100 t, distance between side stands: 420 mm, overall weight: 16,000 kg, year of last overhaul: 2014, Raster die-cutting machine Stroke rate: 20 - 220 Table area: 700 x 1000 Stroke adjustment: 20 - 90 mm Unidor Compact Press CE 2014, complete system Weight: approx. 16,000 kg Accessories: Raster roller feed Ibsdpfx Asz Ekvuon Ioc Kemmerich strip feeding system Safety fence