Used Zoomlion Zs0407Dc-Li for sale (9,412)

Condition: excellent (used), functionality: fully functional, welding power (max.): 180 kVA, Schlatter Posiweld type Libra. Machine was built in 2005, control was upgraded by Schlatter in 2022. Iedpfx Anexlvn Ejmjba

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 3769, total width: 1,667 mm, roll diameter: 1,067 mm, overall weight: 1,360 kg, product width (max.): 1,067 mm, input voltage: 460 V, ROTARY SHEAR SLITTING STATION: The rotary shear slitting station is a modular design allowing detachment from the main frame. The powered 60mm (2.367 inch) diameter upper and lower knife shafts drive the male and female shear knife assemblies. The male and female shear knife assemblies may be positioned anywhere within the web area and are held in position by eccentric locking keys. The removable male shear knife shaft assembly is mounted to a rigid dovetail bar assembly. The dovetail bar assembly is adjustable axially for shear knife face contact pressure and rotationally for knife overlap. A two-position lock lever assembly is used to rotate the dovetail bar assembly 900to the open position for removal of knife shaft assembly or closed in the slitting position. Rotary shear drive speed is proportional to web speed or manually controlled by the operator. Iodpfx Anjy Ufgxemeba REWIND: The slit web is alternately rewound on the duplex air expanding rewind shafts. Flange mounted rewind shafts provide ease of change to other desired types or diameters. The outboard rewind support swings open for removal of finished rolls from the cantilevered rewind shafts.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: M22-0012, mandrel length: 1,800 mm, mandrel diameter: 1,500 mm, type of input current: AC, total width: 1,800 mm, roll diameter: 1,500 mm, overall weight: 3,000 kg, product width (max.): 1,800 mm, input voltage: 480 V, General Features The single-shaft slitter rewinder uses independent presses for accurate, safe rewinding. Unwinder A shaft-less unwinder allows floor-level reel loading and dual rotation directions. Pneumatic-mechanical chucks secure the reels. Rollers and Alignment Aluminum rollers enhance durability and lightness. An automatic web aligner centers the master reel using edge detection. Tension and Cutting Control AC motors, load cells, and diameter calculation control unwind tension. The shear-type cutting group features 14 circular blades with pneumatic supports and has a quick-change counter-blade shaft. Curved rollers and suction nozzles manage cut separation and scrap removal. Rewinding Presses and Holding Steel, molybdenum-coated presses ensure longevity. Motorized tips enable automatic reel positioning. Rewinding Control A steel pressure roller—pneumatically operated with a proportional valve—sets pressure. Rewinding torque is managed via operator panel controls. A pneumatic clamp and two AC motors balance tension. Discharge and Safety Systems A hydraulic shovel and pusher facilitate reel discharge. The area is secured by a safety barrier. Control and Automation System AC motors and vector drives (SIEMENS) with proprietary software handle diameter calculation and torque control. All functions are accessible via a touch terminal with PLC communication. Ibsdey Ufgropfx Anmja

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 663015, Walter Helitronic Mini Power Production 5 Axis CNC Tool & Cutter Grinder Iodpou Ez Hujfx Anmoba Universal tool and cutter grinder (CNC controlled) Made by Walter, model Helitronic Mini Power Production, s/n663015, year 2000 Description: Suitable to manufacture and regrind metal and woodworking tools of all kinds. Run with 1 micron filtration system, so the machine is very clean. Specifications: • Longitudinal traverse (X-axis) 350 mm, • Vertical traverse (Y-axis) 200 mm, • Cross traverse (Z-axis) 470 mm, • Rotary table swiveling range (C-axis) +/- 200°, • Work head ISO 50, center height (with / without worktable) 145 / 190 mm, • Max. diameter of workpiece 100 mm • Max. length of workpiece 270 mm • Max. dia. of grinding wheel 150 mm • Peak performance 11,5 kW, grinding spindle motor 9kW,speed 0 - 9500 rpm, • Connected load approx. 25 kW (460 volts 3ph / 60 Hz), • Dimensions w x d x h = 2600 x 2550 x 1970 mm, weight approx. 3950 kg, color grey RAL 7035 / grey RAL 7043. Accessories: • Control HMC 500 Windows XP Upgrade • Includes: 2021 Ebbco Filtration & Chiller unit Model PMF-MWF5-623-P-40K capable of filtering & chilling up to 2 grinders. 40,000 BTU Chiller & filtration up to 1 Micron. • Booster Box Upgrade option along with a spare Booster Box as well that could be used as a backup or for up to 3 other Walter machines. Value of each booster box is $10,000 a piece. • Stepless speed control, probe, pneumatic workpiece clamping • Fire extinguishing system • Mist Extractor • Oil collecting pan, 2 grinding wheel flanges • Complete set of Manuals Software: • Tool Studio Version 2.1 Standard & Steptools • WWM Software Condition: • New Y axis Motor & Ball screw Installed 2021 • New Spindle Installed 2021 • New Electrical cabinet air conditioner Installed 2021 • All new encoder & motor cables for A, C, X, Y & Z axis Installed 2021 • Currently in production producing very accurate & consistent tools. Can be viewed under power • We have all of the shipping bracket, so the machine will be safely secured for shipping. • We can load onto a flatdeck for shipping for $900. We can also provide shipping & crating quotes if you would like.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 693068, overall weight: 7,300 kg, power: 30 kW (40.79 HP), Walter Helitronic Vision CNC Tool & Cutter Grinder with Pallet Loader Universal tool and cutter grinder (CNC controlled) Made by Walter, model Helitronic Vision, s/n 693068, year 2008 Description: Suitable to manufacture and regrind metal and woodworking tools of all kinds. Can be viewed under power. Specifications: • Longitudinal movement (X-axis) 480 mm • Y axis vertical movement 320 mm • Z-axis transverse movement 700 mm • Rotary table swivel range C-axis +/- 200 ° • Workpiece Holder ISO 50 • Max. Workpiece diameter 320 mm Ibsdpfxeuqzdpe Anmsa • Workpiece length circumferential grinding 370 mm • Workpiece length for face machining 320 mm • Accuracy linear resolution 0.0001 mm • Radial resolution 0.0001 ° • Diameter of the spindle 100 mm • Grinding wheel mount: HSK50 • Diameter of the grinding wheel 200 mm • Grinding spindle speed 0 – 12,000 rpm., • Top performance 30 kW • Connected load 35 kW (460 V / 60 Hz) • Weight approx. 7,100 kg • Dimensions L x W x H 3649 x 2490 x 2301 mm Accessories: • Does not include wheel opening stick fixture seen in the pictures • Stepless speed control, probe, pneumatic workpiece clamping • Electrostatic mist extractor • Fire extinguishing system • Oil collecting pan, 2 grinding wheel flanges, Complete set of Manuals • Turmoil Drive Chiller • Loader Pallets: 8pcs – 3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”, 3/4”, 1-1/4” • 10pcs - HSK Wheel Arbors Software: • Windows XP Pro Svc Pack 3 • Tool Studio V3.3 • The computer was upgraded & is very fast rendering tools in Tool Studio Condition: • Excellent condition, very accurate & consistent. October 2023 Y axis Complete rebuilt, Linear motor, rails, Compensation Cylinder, Festo Booster Pump done by United Grinding. • 1 Micron Filtration system was used on the machine (not included), so it’s been kept extremely clean • We can load onto a flatdeck for shipping for $1200. We can also provide shipping quotes if you would like & crating for Sea Freight shipping.

Condition: used, empty load weight: 8,798 kg, maximum load weight: 30,202 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2019, next inspection (TÜV): 02/2027, loading space length: 13,410 mm, loading space width: 2,490 mm, loading space height: 2,600 mm, loading space volume: 86 m³, suspension: air, tire size: 385/65 R22,5, wheelbase: 7,600 mm, color: white, Year of construction: 2019, Equipment: ABS, tail-lift, Tare weight: 8798kg, GVW: 39000kg, Loading area (L W H): 13,410 mm x 2,490 mm x 2,600 mmTyre size: 385/65 R22.5, Loading area volume: 86 m³, 1st axle: , 2nd axle: , 3rd axle: , Air suspension, Rear underrun, Taillift: Dhollandia 2T., Electronic Brake System EBS, Ferry lashings, Temperature recorder: Euroscan TX3 temperature recorder with printer., Hubodometer, 1x15 and 2x7 pin plug, Antispray, Please find an overview of all vehicles available on our website . Finance required? We offer individual financing solutions, full service contracts and telematic-services. We would be glad to advise you personally. Ibodpfxezu Elxs Anmsa

Condition: used, empty load weight: 8,798 kg, maximum load weight: 30,202 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2019, next inspection (TÜV): 10/2026, loading space length: 13,410 mm, loading space width: 2,490 mm, loading space height: 2,600 mm, loading space volume: 86 m³, suspension: air, tire size: 385/65 R22,5, wheelbase: 7,600 mm, color: white, Year of construction: 2019, Equipment: ABS, tail-lift, Tare weight: 8798kg, GVW: 39000kg, Loading area (L W H): 13,410 mm x 2,490 mm x 2,600 mmTyre size: 385/65 R22.5, Loading area volume: 86 m³, 1st axle: , 2nd axle: , 3rd axle: , Air suspension, Rear underrun, Taillift: Dhollandia 2T., Electronic Brake System EBS, Ferry lashings, Temperature recorder: Euroscan TX3 temperature recorder with printer., Hubodometer, 1x15 and 2x7 pin plug, Antispray, Please find an overview of all vehicles available on our website . Finance required? We offer individual financing solutions, full service contracts and telematic-services. We would be glad to advise you personally. Iedozu Elrepfx Anmjba

Condition: used, Used approximately 13,400 litre Inox-Maurer AG stainless steel reactor body. Unit has an approximately 770 litre external coil. Unit is rated 2.0 / -1bar internal operating at 200degC. External coil is rated 16.0bar operating at 200degC. Unit has an internal material of construction of 1.4435 and external coil of 1.4306. Ibjdpfxey Ryrnj Anmja Specifications: Capacity: 13,400 L

Condition: used, Used Netzsch approximately 1,000 litre stainless steel vertical jacketed mixing vessel. Unit has welded flat top and bottom heads. External jacket rated 3 bar working pressure. Unit has top entry stainless steel anchor type agitator with drive and stainless steel high shear agitator with drive. Unit is mounted on (4) legs with forklift attachment. Iedpfx Anezun Hrsmsba Specifications: Capacity: 264.2 gal Type Of Heads: Flat top and bottom heads Vertical/Horizontal: Vertical Legs/Lugs/Skirt: 4 legs with forklift attachment

Condition: used, Used Vale Engineering Services approximately 12,000 litre working capacity (13,110 litre total capacity) 316L stainless steel vertical reactor / hydrogenation vessel. Unit measures approximately 1,750mm diameter x 5,000mm straight side (tan to tan). Unit has welded dished top and bottom heads. Internal rated 18 bar / full vacuum design pressure at -10 to 180 deg.c. External 304L stainless steel coil jacket rated 11 bar design pressure at -10 to 180 deg.c. Unit has top entry 316L stainless steel 4-tier, 6-blade agitator driven by 15kW, 1465rpm, 50hz electric motor with mechanical seal and reduction gearbox. Unit is mounted on (4) side support lugs. Ijdpfx Aezun D Donmeba Specifications: Capacity: 12,000 L Type of stainless: 316L Contact Parts Internal Pressure: 18 bar Internal Temperature: -10,180°C Jacket Pressure: 11 bar Diameter: 1,750 mm Straight Side: 5,000 mm Type Of Heads: Dished Legs/Lugs: 4 Lugs

Condition: used, Comprehensively tested, used Kemutec approximately 400 litre working capacity (product dependent) 316 stainless steel ribbon blender. Trough measures approximarely 1680mm Long x 580mm wide x 700mm deep. Has stainless steel single interupted ribbon driven by 5.5kw motor & gearbox. Unit includes stainless steel hinged lid with clamps. Includes bottom discharge valve. Specifications: Capacity: 14.1 ft³ Material of construction: 316 stainless steel Width: 22.83" Horsepower: 7.4 hp Length: 66.14" Jacket: No Iodpfeyma Dbox Anmsba

Condition: excellent (used), Saxon Continuous Bag Sealer Stainless steel Adjustable temperature control Ibedpfx Ajzcrlcenmea Electric adjustable mast height Mobile on castors Excellent condition

Condition: excellent (used), Correa A-20-25 Bed Type Travelling Universal Milling Machine Spindle Speeds 20 - 2000rpm Spindle Taper ISO50 Spindle Motor 15kW Table Size 2500 x 700mm Longitudinal X Axis Travel - 2200mm Vertical Y Axis Travel - 1000mm Cross Ram Z Axis Travel - 1000mm Range of Feeds Inf. Variable 5 - 1500mm/min Rapid Feeds 3000mm/min Overall dims - 3600 (5800) x 2220 (3320) x 2750 (WDH) Weight 9500kgs. *For sale with Jet Machinery Ltd* Stock No: 79042 Serial No: 9210511 Price: £17,500.00 + VAT Ibedpjzuxrrofx Anmoa Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), TBT T30 SERIES TABLE TYPE GUN DRILLING MACHINE Model T30-1000KTN Serial number 410.364.016 Year of manufacture, approx. 1980 Number of spindles 1 Drilling range in steel 4 - 30 mm (solid) Counter boring 40 mm Nominal drilling depth 1000 mm Slotted table size 850 long x 750 wide mm Table size overall 1100 long x 1000 wide mm Table cross movement 800 mm (approx.) Table vertical movement 400 mm (approx.) Drilling slide longitudinal travel 1450 mm Slideway width 250 mm Spindle speeds to approx. 9000 rpm Spindle motor 25 kW Total load 41 kW Supplied with: 2 off Whip guides. Ballscrew feed. 2 Axis DRO to table Cross and Vertical, DRO to drill slide. TS25-1000 Coolant tank. Drill bushes. For Sale with Jet Machinery Ltd Jet Machinery Stock No: #27033 Machine Serial Number: 410 364 016 Cost: £17,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Ibedpfjzuxp Rjx Anmea Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), XYZ SMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Year of Manufacture 2008 Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar For sale with Jet Machinery Ltd Jet Machinery Stock No: #79245 Iodpfx Anjzuxn Tsmsba Machine Serial Number: 10731 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Used BCD Engineering Ltd stainless steel vertical reactor body. Approximately 4,000 litre nominal capacity. Unit measures approximately 1,800mm diameter x 1,700mm straight side. Has welded dished top and bottom heads. Internal rated 10 bar / full vacuum design pressure at -29 to 200 deg.c. External stainless steel coil jacket rated approximately 324 litre capacity, 6 bar / FV design pressure at -29 to 200 deg.C. Unit includes top mounted stainless steel anchor type agitator but no drive/gearbox currently fitted. Unit mounted on side support lugs. Ibsdpfx Ajzimv Ionmsa

Condition: used, Little used Kosme filling line with equipment made between 2020 and 2021. Equipment includes: - Kosme rotary weight-filler, designed for precise filling of liquids such as edible oils, dairy, home care, or personal care products. - Kosme Flexa Sensicol rotary labelling machine. Ijdpfx Anjzunu Nemsba - Kosme and Atlanta S.p.A. packaging equipment.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, REF: MM6419 1 x Carnitech twin-lane pin-bone removing and packing line. This machine is designed for removing pin-bones ensure a high product quality and helps to achieve a maximum yield at shorter time. Head end first and skin side down, the salmon fillets are conveyed to the pin-bone head on a pvc belt. Carnitech pin-bone removers treat the fillets very gently. Ijdpfxey Swi Hs Anmeba This system is suitable for processing both salmon and trout. Manufacturer - Carnitech A/S. Type - CT 2612. Pin-Boner Date of manufacture - 2000 (refurbished approx 2 years ago). Packing Line Date of manufacture - 2023/24. Capacity / Output - up to 36 fillets / minute (was only being run at 10 fillers / minute). Size of fillet - between 0.5 kg up to 4 kg. Video available on request.

Year of construction: 2003, condition: good (used), functionality: fully functional, 1 x Gainsborough Engineering Ltd packing system, previously used to pack small machine components. Comprising of infeed pocket conveyor, vertical form, fill and seal bagger fitted with Zodiac HS printer and an outfeed conveyor. Manufacturer - Gainsborough Engineering Ltd. Model of VFFS bagger – GV2K1. Date of manufacture – 2003. Sealing bars - 250mm long (vertical & horizontal). Reel width - 505mm. Current film - 230mm. Forming tube - 60mm diameter. Sorting / infeed table - 1500mm long x 710mm wide. Ibedpfoy Hlvwox Anmea Outfeed conveyor - 290mm wide belt x 950mm outfeed. Overall footprint - 6.15m long x 1.7m wide x 2.2m high. Condition – Fully operational.

Condition: repair required (used), Year of construction: 2003, functionality: limited functionality, REF: MM6413 1 x Gainsborough Engineering Ltd packing system, previously used to pack small machine components. Comprising of infeed pocket conveyor, vertical form, fill and seal bagger fitted with Zodiac HS printer and an outfeed conveyor. Manufacturer - Gainsborough Engineering Ltd Ibjdey Hlkbopfx Anmja Model of VFFS bagger – GV2K1. Date of manufacture – 2003. Sealing bars - 250mm long (vertical & horizontal). Reel width - 505mm. Current film - 230mm. Sorting / infeed table - 1500mm long x 710mm wide. Outfeed conveyor - 290mm wide belt x 950mm outfeed. Overall footprint - 6.15m long x 1.7m wide x 2.2m high. Condition – Not operational, out of action 3-4 months.

Condition: excellent (used), REF: MM6174 1 x Machinery Automation Ltd Capping line Technical specification: ✅ Manufacturer - Machinery Automation Ltd ✅ Model - MA-CET70 Capping Line. ✅ Cap Types - Screw Cap, Jar, Foamer, Dropper, pre-formed ROPP. Ibodpfx Asw E Ey Tsnmoa ✅ Cap Diameters - 18 – 70mm (extended to 90mm). ✅ Bottle Height - 30 – 300mm Notes: This has been built for glass jars, which include a 43mm cap, a 53mm cap, 73mm cap and 70mm cap. There are 4 x change parts with the elevator to suit these and the capper gets adjusted to suit without any change parts.

Condition: used, axle configuration: 3 axles, first registration: 01/2023, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2023, = Additional options and accessories = - vehicles.accessories.coil = Further information = Tire size: 385/65 R22.5 Axle brand: Anders Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Tire tread depth left: 4 mm; Tire tread depth right: 4 mm Rear axle 2: Tire tread depth left: 10 mm; Tire tread depth right: 14 mm Rear axle 3: Tire tread depth left: 3 mm; Tire tread depth right: 4 mm Isdozu Ivmopfx Anmjba Damage: None

Condition: used, axle configuration: 3 axles, first registration: 01/2023, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2023, = Additional Options and Accessories = - vehicles.accessories.coil = Further Information = Tire size: 385/65 R22.5 Axle brand: Anders Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Tire tread depth left: 16 mm; Tire tread depth right: 16 mm Rear axle 2: Tire tread depth left: 14 mm; Tire tread depth right: 14 mm Rear axle 3: Tire tread depth left: 17 mm; Tire tread depth right: 5 mm Damage: None Isdpfxszu Ivgs Anmsba

Condition: used, axle configuration: 3 axles, first registration: 01/2023, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2023, = Additional options and accessories = - vehicles.accessories.coil = Further information = Tire size: 385/65 R22.5 Iedpfx Aozu Iu Nsnmeba Axle brand: Other Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Tire tread depth left: 3 mm; Tire tread depth right: 2 mm Rear axle 2: Tire tread depth left: 15 mm; Tire tread depth right: 11 mm Rear axle 3: Tire tread depth left: 10 mm; Tire tread depth right: 3 mm Damage: None

Condition: used, axle configuration: 3 axles, first registration: 01/2023, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2023, = Additional Options and Accessories = - vehicles.accessories.coil = Further Information = Tire size: 385/65 R22.5 Axle brand: Other Ibodpfx Aozu Iu Asnmsa Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Tire tread depth left: 11 mm; Tire tread depth right: 13 mm Rear axle 2: Tire tread depth left: 13 mm; Tire tread depth right: 13 mm Rear axle 3: Tire tread depth left: 13 mm; Tire tread depth right: 13 mm Damage: None