Used Bak-Tec Bt-S150 for sale (7,175)

Condition: used, Year of construction: 2013, operating hours: 73,000 h, functionality: fully functional, power: 7,130 kW (9,694.09 HP), output frequency: 50 Hz, nominal power: 7,130 kW (9,694.09 HP), continuous power: 7,130 kW (9,694.09 HP), rotational speed (max.): 1,500 rpm, motor manufacturer: M+M Turbinen-Technik, Evaporation pressure: 21 bar Steam pressure: 4.3 bar Temperature: Inlet 365 °C / Outlet 165 °C Generator: 8300 kWel Operating hours (annually): 8760 h/year Transformers included: Siemens Type 4GU6043-9HY Total operating hours: 73,000 h M+M turbines are typically custom-made industrial steam turbines used for combined heat and power (CHP) or for energy recovery from process steam. Due to the moderate inlet pressure and the relatively high outlet pressure, this is a back pressure steam turbine. It was designed for process steam systems to ensure efficient energy recovery and heat supply. The turbine was used in a paper mill to increase efficiency. Dwedsz E Nh Nepfx Akmsc With an output of 7.2 MW, this turbine is considered a medium-sized system in industrial applications. Thanks to the pressure ratios and the use of the turbine's exhaust steam, very little energy is lost. The estimated steam flow rate is 30 to 40 t/h. This enabled the paper mill to achieve an efficiency of 60% to 75%. The efficiency in CHP operation was approximately 75% to 85%. The turbine was designed for operation for 8,760 hours (full load year) with a maximum steam flow rate of 114 t/h. The turbine-generator unit supplies the paper machine with electricity at the 6 kV level. The process steam required for production is provided in two pressure stages. As the steam flows through the turbine, the steam pressure is reduced from 20 bar to 4.2 bar. If the turbine needs to be shut down for any reason, the process steam supply is provided via four pressure reducing stations connected in parallel.

Year of construction: 2022, condition: like new (used), The Raytec Spray is a high-resolution belt-type optical sorting machine designed for inspecting and sorting whole or cut agri-food products like fruits, vegetables, and salad leaves. Optical Resolution: 0.5 × 0.5 mm Dodsz E Smzjpfx Akmswc Light & Vision Technology: Pulsed LED lighting source with ultra-high-resolution CCD cameras viewing from above (supports up to 8 simultaneous digital signals/Octa-Chromatic analysis) Air Rejection System: 176 electrically controlled ejection nozzles with a 6 mm nozzle pitch

Condition: used, Technical details: bore capacity in steel (diameter): 2-20 mm throat: 210 mm bore stroke: 100 mm Distance spindle/table max.: 450 mm range of revolution per miute: I : 450-1800 + II: 900-3550 / 4step U/min spindle taper MT: 2 table surface area: 340x280 mm total power requirement: 1,1 kW machine weight ab.: 165 kg transport dimensions LxWxH: 0,6 x 0,5 x 1,28 m Robust industrial drilling machine manufactured in the former East Germany by the "Fritz Heckert" Machine Tool Combine. Equipped with a 1.1 kW motor, 380 V three-phase power supply, and a machine weight of approximately 165 kg. Precision machine suitable for drilling, countersinking, and light reaming operations. Solid cast-iron construction, ideal for toolmaking, workshops, maintenance departments, and training facilities. Dedpszgaiiofx Akmewc *

Condition: good (used), Bakery Racks Mobile on castors 30 inch x 21 inch x 73 inch Dwjdpfez Hl Arox Akmsc Approx 70 racks available

Year of construction: 2010, condition: used, 3-axis machining center with automatic tool change for aluminum or PVC profiles Max. Travel distance X-axis: 6,700 mm Max. travel Y-axis: 350 mm Max. travel Z-axis: 280 mm Windows 10 control with new computer in 2023 Speed continuously adjustable up to 24,000 rpm handheld control unit minimum quantity spraying Tool changer with 2 magazines (total 10 places plus angle head) tensioner detection and tensioner displacement 2 pneumatically folding material stops and 2 light curtain areas, enabling pendulum operation Dwsdpfx Aowwukxokmoc A total of 8 material clamps Spindle in very good condition, spindle-in-draw force: 12.5 kN Protective fence removed, a demonstration is still possible by arrangement Weight: approx. 3,500 kg

Condition: good (used), Year of construction: 2002, Double miter saw, manufactured by elumatec, type: DG79/32, year of manufacture: 2002. Digital display for length. 6-meter machine. Oil-mist lubrication system. Machine documentation available. In good condition. Djdpoz Hmx Iefx Akmowc Saw blade: 380 mm x 3.6 mm / 3.0 mm x 32 mm. Further details can be found in the data sheets.

Condition: good (used), 1 x Provatec 745 Burger Forming Machine Serial number: 745.04.686 Djdpfez Hn Tasx Akmswc 3 Phase

Condition: used, Newtec H3013MD 13-Lane Linear Weigher with Elevating Belt – Double PCS (2013) The Newtec H3013MD is a high-capacity 13-lane linear weigher featuring an integrated elevating belt and a Triple PCS (Portion Collection System). This dual collection system enables significantly higher throughput by collecting and discharging two weighed portions simultaneously, making it an excellent solution for high-speed fresh produce packing lines. Designed specifically for products such as potatoes, onions, carrots, tomatoes, citrus fruits and other fresh produce, the H3013MD combines accurate weighing with gentle product handling and exceptional reliability. The hygienic stainless steel construction and proven Newtec technology make it a popular choice for demanding packing operations. Technical Specifications - Manufacturer: Newtec - Model: H3013MD - Type: 13-lane linear weigher with elevating belt - Serial number: 10729 - Year of manufacture: 2013 - Power supply: 400 V - Phase: 3 Ph - Frequency: 50 Hz - Current: 9 A - Number of weighing lanes: 13 - Lane length: 730 mm (13x) - Gutter width: 95 mm (13x) - Weighing basket dimensions: 140 × 95 × 170 mm (13x) Key Features Dwsdpfszilitjx Akmoc - 13 independent weighing lanes for accurate portioning - Double PCS (Portion Collection System) for increased output and higher packing speeds - Integrated elevating belt for continuous and even product feeding - Gentle handling of delicate products - Hygienic stainless steel construction - Easy access for cleaning and maintenance - Suitable for a wide variety of fresh produce applications - Proven Newtec technology known for its reliability and accuracy - Easily integrated into existing packing lines The machine is in good overall condition and is available for inspection. Additional photos, videos or a live demonstration can be provided upon request. Contact us for pricing, availability or additional information. More photos and full specifications: / * Manufacturer: Newtec * Model: H3013MD * Serial number: 10729 * Year of manufacture: 2013

Year of construction: 2014, condition: used, This listing is for a Freestead Technology WFI Storage Vessel Control panel. The unit is in full working condition and is ready for immediate release. Dodpfjxv A Srjx Akmowc This Unit was installed new in 2015 by Freestead Process Technology. A control panel designed and built for WFI system

Condition: used, This listing is for a ChemoMetec DK-3450 Allerod Automated Cell Counter The unit is in full working condition and ready for immediate use This automated cell counter is a high-quality lab instrument manufactured by ChemoMetec (Model: DK-3450 Allerod). Provides highly accurate and reproducible cell counting and viability analysis using advanced imaging cytometry technology. It has been sourced directly from a working facility, offering premium performance and dependability for standard laboratory applications while ensuring a cost-effective alternative to purchasing brand new equipment. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Dsdpfx Aezuf Sxjkmswc Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Year of construction: 2014, condition: used, This listing is for a TTP Labtech Acumen ex3 Microplate Cytometer The unit is in full working condition and ready for immediate use Djdpfjzugcxsx Akmswc This microplate cytometer is a high-quality lab instrument manufactured by TTP Labtech (Model: Cellista). A laser-scanning imaging system that offers rapid, high-throughput cellular analysis for drug discovery and life science research. It has been sourced directly from a working facility, offering premium performance and dependability for standard laboratory applications while ensuring a cost-effective alternative to purchasing brand new equipment. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Source Pedigree: Biotech / Research Facility Condition: Direct-from-Bench (Decontaminated/Original) Integrity: 100% Original Parts (Non-Refurbished)

Condition: used, This listing is for the Agilent 2100 Bioanalyser. The unit is in full working condition and ready for immediate use. Compact microfluidics system designed for rapid, high-precision analysis of nucleic acids and proteins with minimal sample volume and automated processing. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Dwsdpfx Aoy Hqk Hokmjc Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Condition: used, mileage: 59,373 km, power: 129 kW (175.39 HP), first registration: 01/2023, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,750 mm, fuel: diesel, color: grey, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: air, number of seats: 3, loading space length: 4,290 mm, loading space width: 2,090 mm, loading space height: 2,160 mm, Year of construction: 2023, Equipment: Apple CarPlay, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, = Additional options and accessories = - Armrest - Remote central locking - Radio Djdpfx Ajxxzayjkmjwc - Tachograph = Further information = Availability Reserved: This vehicle is reserved for a customer (subject to sale). General information Number of doors: 2 Model year: 2026 Technical information Number of cylinders: 4 Engine displacement: 2,998 cc Axle configuration Axle brand: Other Front axle: Steered; Tire tread depth left: 30%; Tire tread depth right: 30% Rear axle: Double tires; Tire tread depth left inner: 50%; Tire tread depth left outer: 50%; Tire tread depth right inner: 50%; Tire tread depth right outer: 50%; Suspension: Air suspension Weights Unladen weight: 3,193 kg Payload: 2,007 kg GVW: 5,200 kg Interior Interior: black Maintenance, history, and condition APK (Technical Inspection): valid until 03/2027 Number of keys: 2 (1 remote control) Product safety Manufacturer: Oostland Automobielen Wasaweg 22 9723JD GRONINGEN, NL

Condition: new, functionality: fully functional, overall weight: 100 kg, total height: 1,660 mm, Year of construction: 2026, input voltage: 230 V, laser power: 20 W, laser wavelength: 1,064 nm, type of cooling: air, type of input current: AC, The universal laser marking system LAS 28 from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes a laptop incl. holder with Windows operating system. Optionally, the laser model LAS 28 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long parts, can be realized. Made in Germany - Fiber laser 20W (Optional: 30W, 50W) - Wavelength 1064nm - marking field size 150x150mm (optional: 200x200) - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: Autofocus system - signal light for indication of operating status - marking software EZCAD (optional additional laser software) - Pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. part height approx. 270mm - electrically adjustable Z-axis (adjustment of working plane) - frame made of aluminum profile - connection 230V Dwjdpfxjzpwmde Akmjc - air cooled - Laptop with Windows operating system - dimensions: 800x 600 x 1660mm (LxWxH) - weight: approx. 80 Kg

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 45 kg, total length: 350 mm, total width: 605 mm, total height: 1,080 mm, input voltage: 230 V, laser power: 20 W, laser wavelength: 1,064 nm, scan area length: 70 mm, scan area width: 70 mm, type of cooling: air, type of input current: AC, laser type: fiber laser, The mobile laser LAS 23 portable is characterized by its compact design. Small, handy and with custom-made attachments that can be individually exchanged in the quick-change system. With its mobile base, it can be moved to the workpieces to be marked. This makes it suitable for small, large and heavy workpieces. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Made in Germany - Fiber laser 20W (optional: 30 Watt, 50 Watt) Dwedpfx Aozxcfkjkmec - Laser class 1 - CE compliant, according to EU directives - Wavelength 1064nm - Marking field size 70x70mm (optional: larger) - Signal lamp for indication of operating status - marking software EZCAD - Connection 230V - Air cooled - Laptop with Windows operating system - Dimensions: 350 x 605 x 1080mm (LxWxH) - Weight: approx. 40 Kg - weight of portable laser unit 2,8 Kg - Fiber optic cable approx. 2,50 m - Extraction optional

Condition: new, Year of construction: 2026, functionality: fully functional, rapid traverse Y-axis: 20 m/min, spindle speed (max.): 60,000 rpm, mount diameter: 3 mm, total width: 800 mm, type of input current: AC, table length: 320 mm, table height: 560 mm, warranty duration: 12 months, working width: 560 mm, ambient temperature (min.): 18 °C, ambient temperature (max.): 30 °C, compressed air connection: 6 bar, working length: 320 mm, number of axes: 3, The compact tabletop version LOW MINI has been specifically developed for depaneling small-format production panels, small series of larger format, and cost-conscious manufacturing. PCB materials with breakout tabs can be separated quickly and economically up to a maximum size of 320 mm x 560 mm. The separation process is servo-controlled on all axes, with the milling drive operating from above. The machine’s highlight is its easy and straightforward switch between small (320 x 280 mm) and large (320 x 560 mm) working areas. Dodpjxmfdxofx Akmowc • Short cycle times due to shuttle operation • X/Y axes with linear motor technology • Panel fixation using pin technique • Flexible handling • Suitable for PCBs with breakout tabs • Milling spindle adjustment with servo-drive technology • Extraction device • User-friendly operation • Excellent price-performance ratio Manual Depaneling – flexible and cost-effective The concept of manual depaneling offers significant advantages when it comes to flexibility and cost-effectiveness. Medium production volumes can be separated quickly and with minimal dust using the LOW MINI. Standard equipment includes dual loading with linear motor technology, while single-shuttle operation is available to expand the working area. Ease of maintenance and user-friendly operation, combined with its outstanding price-performance ratio, ensure convenient operation and make investing in this depaneling machine a worthwhile choice. Axis speed: 160 mm/s Repeatability: 0.02 mm Separation accuracy: 0.1 mm Shank tool diameter: 0.8 – 2.4 mm

Year of construction: 2026, operating hours: 1 h, condition: new, functionality: fully functional, overall weight: 560 kg, total length: 1,870 mm, total width: 1,040 mm, total height: 1,550 mm, compressed air connection: 6 bar, positioning accuracy: 0.01 mm, repeat accuracy: 0.01 mm, rotational speed (max.): 60,000 rpm, type of input current: three-phase, Semi-automatic depaneling / basic machine with parallel shuttle The dynamic depaneling machine LOW 4322 is especially suited for medium to high product volumes and meets growing demands in the production process. Printed circuit board blanks of various materials are separated using low-dust and low-stress sawing and milling techniques with maximum product flexibility, precision and throughput. Highly dynamic linear motor axes, tools and grippers meet the highest quality standards and guarantee the depaneling machine a long service life and high reliability. Made in Germany Semiautomatic depaneling - solutions on demand The LOW 4322 depanelling system enables fast product changeover while maintaining short depanelling and handling times. The insertion of the blank PCB is done with a parallel shuttle, pick-up and fixation with pin clamping technology and if necessary in combination with vacuum suction cups. This machine is equipped with: • a shank and disc tool separating module on Z-axis (automatically rotatable 0-90) • X-Y cross stitch module in linear motor technology with high resolution measuring system • 2-compartment loading module built as parallel shuttle, separated left and right with sliding doors • Alu profil frame with two maintenance doors - left and right. • Standard vision system base module for teach-in programming (camera area 400 x 330 mm) • Working area is 420 x 330 mm • Automatic cutter length processing (only in combination with shank separation module) • Remote maintenance/support via remote connection (TeamViewer) or provided by the customer • Touch IPC with Windows operating system • Laser axis measurement incl. protocol • air ionization • Cutter breakage control for end mills only Dodpfx Akjznr Slsmewc • Preparation for vacuum clamping technology • ESD window and sliding doors Optionally a vacuum cleaner unit can be offered later.

Condition: excellent (used), Year of construction: 2024, operating hours: 6 h, functionality: fully functional, Manufacturer: Spaleck Oberflächentechnik Model: Z1 Year of manufacture: 2024 Used, like new condition Operating hours: 6 h Technical data according to the manufacturer: Working container volume: 11 l Usable volume: 7 l Turntable speed: approx. 280 rpm Drive power: 0.75 kW Height of working container: 1,000 mm Operating voltage: 400 V, 50 Hz Dimensions (W x D x H): approx. 530 x 950 x 1,350 mm The system has been dismantled and is stored at our facility. An inspection is possible by appointment. Dwjdpfxsz H Rfxj Akmjc

Condition: new, functionality: fully functional, Year of construction: 2020, total length: 3,550 mm, total width: 2,400 mm, total height: 750 mm, Conveyor system for transporting pallet racks with a 90° transfer unit. The conveyor system consists of three individual, motor-driven chain conveyors with pneumatic lifting devices. Dodpfxsz Hlu Ue Akmjwc -- It is unused and comes from a project that was not realized. -- Technical documentation available: - Operating manual - Installation instructions - 3D data - Drawings - Risk assessment - List of wear parts The components can be inspected by appointment, as shown in the pictures.

Year of construction: 2019, operating hours: 3,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 10031325, This is a high-resolution NIR system capable of detecting particles in the 3 mm size range. Additionally, the machine is equipped with an electromagnetic detector that has a sensitivity of approximately 1.5 to 1 mm, depending on the metal type. Depending on the settings, it can sort positively or negatively. Dwjdpfx Aezl Uzwokmec Technical data: Belt width: 1024 mm Nozzle bar: 6.4 mm working width Upon request, complete documentation can be provided. The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Condition: used, This listing is for 1 of 4 Kinbio Tech YK1225-Shanghai Assembly Roller Conveyor Dodpfxsxzg H De Akmewc

Condition: used, This listing is for a Life Technologies Ion Torrent OneTouch 2 with OneTouch ES The Life Technologies Ion OneTouch 2 with Ion OneTouch ES comprises two modules: the Ion OneTouch™ 2 Instrument and the Ion OneTouch™ ES (enrichment system). It simplifies the workflows by providing an automated solution for scalable and reproducible template preparation. It is used for DNA sequencing in healthcare, lab and life sciences. It streamlines the overall Ion semiconductor sequencing workflow, yielding significant time savings and increasing sequencing productivity. The system enables parallel template processing with sample sequencing on the Ion Proton™ or Ion PGM™ sequencers. This reduces the time from sample to sequence to a single day and enables processing of multiple samples per day. The combination of Ion semiconductor sequencing and the Ion OneTouch™ 2 System maximizes the speed of each experiment and minimizes the overall time to completion for each project. The modular design also allows for QC of Ion Sphere™ particles, to maximize experimental control and the success of each experiment. Features: Integrates multiple manual template preparation workflows into a single system Enables parallel processing of multiple samples per day through modular design Supports scalable template preparation for all Ion semiconductor sequencing chips Supports up to 400 bases on the Ion PGM™ System and up to 200 bases on the Ion Proton™ System Includes a full thermal cycling modality for amplification for quick optimization of thermal cycling parameters Employs a peristaltic pump fluidic system that eliminates the need for gas Fits easily on any benchtop with its small instrument footprint Specifications: Weight, OneTouch 2 23 lbs. (10.4 kg.) Weight, OneTouch ES 12 lbs. (5.4 kg.) Dimensions, OneTouch 2 12" W x 16" D x 14" H (30 x 41 x 36 cm) Dimensions, OneTouch ES 9.5" W x 12.5" D x 11" H (24 x 32 x 28 cm) Operating Humidity 20%-80% (non-condensing) Operating Temperature 15°C-25°C Multiplex Capability Up to 384 barcoded libraries High Throughput Compatibility Automated Protocols, Multiplexing, High Throughput-Compatible Dwsdjxzg Ubopfx Akmsc Power 100-240 VAC, 50/60 Hz, 5.5 A max

Condition: used, This listing is for a Miltenyi Biotec AutoMACS 003 The autoMACS Separator is a benchtop instrument for high-speed automated cell sorting. Employing the MACS Technology, the autoMACS Separator is designed for positive selection as well as depletion of magnetically labelled cells. The autoMACS Separator is operated with pre-set separation programs, thus, allowing optimization of cell sorting approaches according to cell abundance and the intensity of marker expression. The separated cells are immediately ready for experiments, cell analysis, or further subset sorting. Dwedpfoxzhhcjx Akmsc

Condition: used, Used Fabrication Technology approximately 5,957 litre total capacity 316 stainless steel vertical reactor. Unit measures approximately 2,150mm tan to tan x 1,600mm diameter. Unit has welded dished top and bottom heads. Internal rated 3 bar/full vacuum design pressure at 5 to 37 deg.c. External stainless steel limpet coil jacket rated 6 bar/full vacuum design pressure at 5 to 37 deg.c. Unit has top entry stainless steel agitator with Lighnin model LS220 drive. Unit is mounted on side supports. Specifications: Capacity: 5,957 L Type of Stainless: 316 Stainless Steel Internal Pressure: 3 bar Internal Temperature: 37°C Jacket Pressure: 6 bar Jacket Temperature: 37°C Legs/Lugs/Mounting Ring: Lugs Dwjdpfx Aszim A Iskmjc Dimensions: 2,150mm tan to tan x 1,600mm diameter

Condition: like new (used), Two like-new soundproof enclosures, each housing two Busch pumps, are for sale. These enclosures are manufactured by Koch Technik. Dsdpfoy Tt Dpex Akmowc Price per unit: €950 If both enclosures are purchased together, the total price is €1,600. The original invoice from Koch is attached in the documents below.