Used 40-Ton Spindle Press for sale (44,621)

Year of construction: 2023, condition: as good as new (ex-display), Parker Zander Adsorption Dryer K-MT6 cold regenerated, with multitronic-plus control with pressure dew point control with pre- and post-filter Exhibit: Parker / Zander Adsorption System K-MT6 YOC 2023 Technical data: Compressed air supply: BSPT G 1/2" Flow: 0.93 m³/min at pressure dew point -40°C Other models and designs on request ! Max. pressure 16 bar Min. pressure 5 bar Compressed air inlet temperature: 25° to 50°C Ambient temperature 1.5°C to 50°C Installation site: frost-free indoor installation in a non-aggressive atmosphere. Mains voltage: 230 V , 50-60 Hz Protection Class: IP65 Dimension: Width: 493 mm Depth: 300 mm Height: 1203 mm Weight: 48 kg Visit our shop. Dodpfsm Twwbjx Akhjkr We always have a large selection of compressors and dryers in stock.

Condition: used, Mackey Bowley Hydraulic Press 100tonnes Capacity, 400mm Stroke, Table 700 x 750mm, Ram 160mm Diameter (Approx), Ram Base Plate Diameter 700mm, Model CM507/04 Dksdpfx Aksyabf Hjhor

Condition: new, Year of construction: 2023, operating hours: 150 h, Used Kaeser Booster Compressor N253-G (9/40) Year of Manufacture: 2023 Operating Hours: 150 hrs Equipment - Compressed air aftercooler design: finned-tube type - Oil supply: via oil pump Dkedpfx Aozaaqzjkher - Oil pressure monitoring - Oil pressure and discharge temperature indication Technical Data Inlet pressure: 9 bar(g) Final pressure: 40 bar(g) Capacity at 40 bar: 1.74 m³/min Minimum ambient temperature: 2 °C Maximum ambient temperature: 40 °C Compressor block speed: 1,135 rpm Number of cylinders: 2 Drive motor rated power: 11.0 kW Motor efficiency class: IE3 Motor protection class: IP55 Electrical supply: 400 V / 3 Ph / 50 Hz Sound pressure level: 76 dB(A) Compressed air inlet connection: G 3/4" Compressed air outlet connection: G 1/2" Visit our always have a large selection of new and used compressors in stock!

Year of construction: 1970, condition: used, machine/vehicle number: 12469, Hydraulic press, single-column quick-cycle press, C-column press, oil-hydraulic press - Press force ram: 40 to -Clamping table: 800 x 560 mm -Insertion height: 750 mm - Projection: 300 mm -Max. Stroke: 350mm -Operation: two-handed Dksdpjb A Tcfjfx Akhsr -Dimensions: 1700/1350/H3200 mm -Weight: about 5000 kg

Condition: good (used), Pressing pliers, pressing machine, pressing jaws, pressing tool Dkodpfx Akovmha Teher -Manufacturer: Roller, press machine type 5788001 with accessories -Pressing pliers: size M15, M18, M22, M28 -Accessories: see photos -Dimensions case: 510/300/H120 mm -Weight: 11.7 kg

Condition: good (used), pressing pliers, crimping pliers, cable lug pliers, hydraulic crimping pliers Dodpfx Aofnk I Ejkhekr -Manufacturer: Orsta, hydraulic pressing tongs -Use: for large cable lugs -Hydraulic connection: see photo -Dimensions: Ø 118 x 315 mm -Weight: 11.2 kg

Condition: good (used), pressing pliers, crimping pliers, cable lug pliers, hydraulic crimping pliers -Manufacturer: Orsta, hydraulic pressing tongs -Use: for large cable lugs -Hydraulic connection: see photo Dodpjvu Sqxjfx Akhokr -Dimensions: Ø 120 x 330 mm -Weight: 11.4 kg

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 16 t, stroke length: 100 mm, table width: 440 mm, table length: 320 mm, clearance between the columns: 500 mm, oil tank capacity: 60 l, total length: 1,040 mm, total width: 1,030 mm, total height: 2,000 mm, 16 ton hydraulic press for sale in good condition HANS SCHOEN TES 16 two-column hydraulic press Year of manufacture: 1986 Pressing force 160 kN motor power: 3kw 380v 50Hz two-hand operation Installation height: 280 mm Stroke: 100 mm Table width: 440 mm Table depth: 320 mm Machine dimensions: height: 200cm width: 103cm length: 104cm weight: 1000kg. Dkodpfx Aozf Ilcjkher

Condition: excellent (used), Year of construction: 1984, power: 17 kW (23.11 HP), type of input current: three-phase, pressing force: 160 t, stroke length: 500 mm, operating speed: 200 mm/s, reverse speed: 125 mm/s, table width: 900 mm, table length: 630 mm, throat depth: 800 mm, ram plate width: 700 mm, ram plate length: 450 mm, oil tank capacity: 500 l, total length: 22,000 mm, total width: 12,500 mm, total height: 34,500 mm, overall weight: 7,000 kg, operating pressure: 160 bar, installation height: 800 mm, pressure: 250 bar, Hydraulic press PYE 160 S/1M. Year of manufacture: 1984. Manufacturer: VEB Wema Zeulenroda (Germany). The machine has undergone a general overhaul. Specifications: Maximum pressing force: 160 tons. Operating pressure: 16 MPa. Upper table: 700 x 450 mm. Lower table: 900 x 630 mm. Daylight opening: 800 mm. Cylinder stroke: 500 mm. Downward speed: 200 mm/sec. Upward speed: 125 mm/sec. Power requirement: 17 kW. Oil tank capacity: 500 l. Weight: 7000 kg. Height: 3450 mm, Length: 2200 mm, Width: 1250 mm. Machine in very good condition. Inspection and test under power possible. Dkodpfoqy E I Rox Akhjr

Condition: as good as new (ex-display), Year of construction: 2016, pressing force: 40 t, We offer an immediately available Hydraulic spotting press with 40 tons pressure. Due to a change of warehouse location, this press is offered at a very competitive price. Pressure 40 t Table length 1000 mm table width 700 mm Dksdpfxshtm E Ne Akher Machine weight approx. 9 t space requirement approx. 4000 x 4400 x 1800 mm stroke length 1050 mm installation height 1200 mm table rotatable 180 degrees table load max. 5 t forward speed 100 mm/sec return speed 100 mm/sec working speed adjustable from 0 to 10 mm/sec. Main cylinder 1 piece table extendable for 1050 mm table tiltable 50 degrees upper tool tiltable 180 degrees Traversing speed of the table 25 mm/sec Pressure, travel and speed adjustable via monitor- control adjustable robust machine body with solid welded construction, manufactured according to DIN 8651 low maintenance and reliable due to robust technology maintenance balcony with marine ladder entire range of motion secured by Sick light barriers Table moves out of the machine to the front and straightens up by 45 degrees on request. Control cabinet to the left of the machine Monitor control with 200 memory locations REMOTE function for remote maintenance Operating manual, technical documents, documentation in German language CE certificate monitor SIEMENS 9" Motors from WEG Hydraulics from Bosch Rexroth Interior lighting Operator panel on swivel arm Two-hand operation on movable stand USB interface for data transfer Siemens control system Light sensors Sick 1250 mm ram plate can be folded down hydraulically, moves up to approx. 175 degrees Columns and cylinders are made of SAE 1045 tool steel (identical to German standard C 45) and are induction hardened and chrome plated on the outside. The linear measuring rod informs the control system of the position of the ram in each case. The travel distance, the upper stop point and the changeover point at which the press is to switch from idle to working speed, as well as the end position to be approached, can be entered easily and quickly via the monitor control. The working speed can be set in 1 mm/sec increments from 0 to 10 sec and in 10 mm increments from 10 to 155 mm. The control monitors the secured areas, all hydraulics and the pump. The control system is housed in a separate control cabinet. The actual press operation is carried out via a control panel mounted on a swivel arm, which reduces the distances involved.

Condition: like new (used), Year of construction: 2007, functionality: fully functional, type of input current: AC, pressing force: 1 t, table width: 200 mm, table length: 230 mm, total width: 400 mm, total height: 860 mm, overall weight: 105 kg, air pressure: 6 bar, FCP-C 10KN pneumatic press machine for sale in several pieces Dksdpfev E Sazjx Akhsr manufacturer: FCP-C pressing force 1 ton Stroke: 75-100 (mm) Air pressure 0.2-0.5 MPa Open height 320 (mm). two-hand operation table size: 200x230mm Shaft dimensions Bore diameter φ15H9 (mm) x depth 35 (mm). Speed ​​controller Low friction roller Rotation stop lever height: 880mm length: 360mm width:400mm weight: 105kg Many options (timing box with counter, load management device, etc.). ●The lowering speed of the press can be freely adjusted by the speed controller. ●Mechanical stop for bottom dead center adjustment. ●Inching operation valve for smooth forming. ●Air equipment is also standard.

Condition: excellent (used), Year of construction: 1990, input voltage: 200 V, type of input current: three-phase, pressing force: 5 t, stroke length: 150 mm, reverse speed: 360 mm/s, table width: 400 mm, table length: 340 mm, overall weight: 400 kg, working height: 385 mm, Equipment: safety light barrier, Hydraulic press JAM HYP-505H press machine in excellent condition for sale Manufacturer JAM HYP-505H model Model year 1990 Capacity 50KN (5t) Stroke length 150mm Open height: 385 mm Table size 400 × 340 mm Punch hole φ25 × 60L mm Plunger approach speed: 260 mm/s Plunger pressure speed: 39 mm/s Ram return speed: 360mm/s Pressure range: 7.7 Mpa Safety light gate Two-hand operation Voltage 3 phase 200v 1.5kw 10A Press body weight: 400kg Operating oil: 25 liters Height (mm) 1070 Width (mm) 670 Dkedpfx Akowin Emjhjr Length (mm) 1060 If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: like new (used), Year of construction: 1991, input voltage: 200 V, pressing force: 3 t, operating speed: 47 mm/s, table width: 410 mm, table length: 320 mm, throat depth: 125 mm, oil tank capacity: 6 l, total length: 735 mm, total width: 505 mm, total height: 987 mm, for sale in new condition ATSUGI 3 ton Hydraulic Press Atsugi Model AP-3-M Used load range: 6-30 (kN) Stroke: 150mm Down speed: 46.7 (mm/s) Up speed 56.7 (mm/s) two-handed operation mobile workbench Operating area: Open height: 250mm open depth: 125mm table size: 410x320mm Motor specification 3 phase AC200V 4P 1.5KW Dkedpev Sd Ansfx Akhjr two-handed operation . mobile workbench Operating oil / quantity: 6 Liter Total weight (kg) 200 Body size ​ Height (mm) 987 width (mm) 505 Depth (mm) 735

Condition: like new (used), functionality: fully functional, overall weight: 200 kg, Year of construction: 2000, pressing force: 2 t, throat depth: 150 mm, Hydraulic Press Atsugi Model AP-2-M Used Load Range: 5-20 (kN) Stroke (mm): 150 Down Speed: 60 (mm/s) Up Speed ​​73.8 (mm/s) Working Area Open Height: 250mm Open Depth: 150mm Table Size: 450x320mm Motor Specification 3 Phase AC200V 4P 1.5KW Two-Hand Operation . Mobile Worktable Fuel Oil / Quantity Daphni Hydraulic 46/6L Total Weight (kg) 200 Body Size ​ Height (mm) 987 Dkedsvbdyfspfx Akhor Width (mm) 505 Depth (mm) 735

Condition: like new (used), Year of construction: 2017, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 380 V, pressing force: 60 t, stroke length: 150 mm, table width: 500 mm, table length: 900 mm, overall weight: 5,600 kg, ram adjustment: 75 mm, stroke adjustment: 75 mm, Equipment: safety light barrier, APA 60 ton eccentric press with air clutch for sale in mint condition Manufacturer: HE Shenzhen HONG-ER Machine LTD type: APA 60 Year of manufacture: 2017 pressing force 60t two-handed operation central fattening Inovance IT600 control required air pressure: 6 bar stroke length: 150mm number of strokes: 35-90/min table-bear distance: 300mm Djdpfx Aeu Hautjkhjkr stroke adjustability: 75mm table size: 900x500mm bear size: 500x360mm total response time: 170ms voltage: 3x380v 50Hz 5.5kw machine weight: 5600 kg

Year of construction: 2008, condition: good (used), Pressbrake LVD - PPEB EASY FORM 320/40 MACH-ID 7712 Make: LVD Type: PPEB EASY FORM 320/40 Control: CADMAN Year: 2008 CNC Crowning Hydraulic tool clamping EFL Easy form laser measuring & correction system Set Tooling Laser guide protection Controlled axis Y1/Y2/X/R/V-Axis Specifications Metric US Standard Max. bending length 4000 mm Distance between column 3150 mm Max. pressing force 320 T Dis. Beam - Table 570 mm Beam stroke 300 mm Table Width 200 mm Troth beam Dkedpfx Aonvduzjkhor 400 mm Approch speed 120 mm/min. Working speed 14 mm/min. Return speed 130 mm/min. Adjustment X-Axis back gauge 1000 mm Control CADMAN Power 42 kW Dimensions (Estimate) Length 5800 mm Width 2300 mm Height 3800 mm Weight 23000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Engraving press, working frame internal dimensions: 26 x 36 cm, working size: 28 x 38 cm, 4 rollers, ink tray. Machine is in good condition and available immediately. Dkedpjxy Ilrefx Akher If interested, we are happy to inform you about additional machines in our inventory. You are warmly welcome to inspect the machine at our facility by prior appointment.

Year of construction: 2025, condition: new, Dimensions (L/W/H) 3450x1550x2950 mm Weight 4500 kg Total power requirement 1,6 kw Dedpjvz Hyzofx Akhskr

Year of construction: 2025, condition: new, Dimensions (L/W/H) 4450x1550x2950 mm Weight 4800 kg Djdpfsvz Hy Iox Akhskr Total power requirement 1,6 kw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 2950x1550x2950 mm Dkjdpfsvz Hyuox Akhsr Weight 4000 kg Total power requirement 1,6 kw

Condition: good (used), Milling chucks, SK 40: Weldon collets, 6 - 25 mm, and collet chucks, 3 - 25 mm. Please inquire if interested! Dodpfx Akoha Uhzjhjkr

Condition: good (used), Year of construction: 1995, machine/vehicle number: 0540/98, functionality: fully functional, Manufacturing number: 0540/98. Year of manufacture: 1998 ,. Capacity: 400 tons. Stroke length: 300 mm. Stroke: 10-40 / min. Slide adjustment 300 mm. Installation height: 700 mm. The table measures 1600 x 1300 mm Net weight: 45 tons. Gable opening: 1600 mm. Exterior dimensions 2 x 3 x 6 meters. Dkedpfx Asicbbzskhor Control system MEAB. Coil feeder / straightener iRON RNE 50B / 11. Decoiler iRON SA6000 max 700 mm.

Condition: used, Year of construction: 2004, max. plate size 680 x 780 mm Dodpozgxbwefx Akhjkr min. plate size 240 x 240 mm max. speed plates 20 /h incl. RIP chemical free

Condition: used, 3~Motor 2SIE1 32M6B Dkedpjzrxxmofx Akhor

Condition: used, Year of construction: 2018, operating hours: 4,575 h, functionality: fully functional, machine/vehicle number: TEBC51AF1JKVJ1152, power: 118 kW (160.44 HP), first registration: 09/2018, fuel type: diesel, maximum load weight: 10,400 kg, fuel: diesel, gearing type: hydrostat, emission class: euro6, loading space volume: 4 m³, Equipment: ABS, air conditioning, Four-wheel steering, pre-wired for a third brush. Dodpfx Akezqtmpehskr