Used Advanced Cooling Tunnel for sale (11,594)

Condition: good (used), standard cooler, car cooler, oil cooler, heat exchanger, hydraulic oil cooler, engine cooler, water cooler, standard cooler Pedpfx Asmhmxuei Togu -Manufacturer: Nissens, cooler aluminum housing -Type: unfortunately no type designation -Number: 2x coolers available -Price: per piece -Dimensions: 675/110/H285 mm / 700/110/H290 mm -Weight: 7.5 kg / 7.7 kg

Condition: used, Tumbler Iglu Scheid with cooling Volume: 250 liters Podpjn Nw R Refx Ai Tegu Dimensions: 140x120x195cm Electrical power: 6.5kW/13kW

Condition: like new (used), Year of construction: 2012, The refrigeration unit is in new condition with storage marks. Weight: 400 kg Height: 205 cm Width: 130 cm Pjdjmmdq Tjpfx Ai Tsgu Depth: 65 cm

Condition: good (used), Air cooler, cold storage, refrigerated container, cold room -Number: 2x fans -Fan diameter: 400 mm -No further technical data available -Number: 2x coolers available - Price: per piece -Dimensions: 1000/1700/H320 mm -Weight: 94 kg/piece Psdpfx Aieb Nx Hij Tegu

Condition: used, Cooling unit, cooling water recooler, water chiller, chiller O. Hellwig Year of manufacture: approx. 1995 Cooling capacity: approx. 8 kW Rated power of cooling unit: 3 kW Refrigerant: R422D Water tank volume: approx. 35 liters Psdpfx Aijpu R Nco Togu Circulation pump flow rate: 40 liters/min Pump output: 0.63 kW Water connections: 1/2 inch Power supply: 380 Volt, 50 Hz - Temperature setting via rotary potentiometer Space requirement (L x W x H): 1100 x 750 x 140 mm Weight: 285 kg

Condition: used, Used and in good condition Koma Multi-deck KMD-4-240-1500 Z-profile freezer with 3x hand over of product. Effective belt width 2.380 mm and effective belt length 4 x 15.000 mm. Belt speed can vary between 0,07 m/min and 2,30 m/min. Belt drive motors 4x Flender This multi-deck comes with a complete installation. 6x Bitzer S6F-30.2Y-40P (x2) compressor set with liquid reciever, oil separator, filter, pressure safety switches and gauges. 6x Koma CAV L09 1x2A condensors with 2 fans. Installation complete with control panel with Somron sysdrive inverters. drives and automation. 6x Evaporators from Goedhart LLK.p 187 M2 with a capacity of 27 kW at 25.000 m³/h per piece. Fans have a downblow of 45°C. This tunnel freezer is currently assembled in our warehouse as you can see in the last photo, ready for a viewing. 800 piece/h apple pie in 60 minutes ( 2200 grams/piece) +40ºC to -18ºC. Pgjdorlk Ikepfx Ai Tju

Condition: used, Collecting pan, floor pan, collecting container, floor element, steel flat pan, coolant liquid collecting pan, collecting pan grinding machine milling machine -Collection pan: for chips with coolant liquid, 1045 x 745 mm -Bath height: 150 mm -Cut-out: 240 x 175 mm -Total dimensions: 1045/745/H150 mm -Weight: 12.1 kg Pgjdjh Ic Nzopfx Ai Teu

Condition: excellent (used), This system If designed to continuously cool veg products in glycol chilled water what was bought new by our customer to chill sachets of hot sauces and soups at 2500 KG per hour. Available separately or as a line with infeed and outfeed conveyors. Pjdpfx Ajh Uyg Noi Tsgu

Condition: good (used), Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump -Cooling water pump: with cooling water reservoir Pgjdpfoif Satox Ai Tju -Pump: Manufacturer Elpu Type N 120 -Power: 0.085 kW -Speed: 2800 rpm -Dimensions: 570/540/H370 mm -Weight: 24 kg

Condition: good (used), Year of construction: 2012, Control cabinet - cooling unit, control cabinet air conditioning unit, distribution cabinet, heat exchanger spindle cooler Pedsi Sdf Uepfx Ai Tegu -Manufacturer: Harbor, heat exchanger spindle cooler from CNC machining center Santenberg GTC S 2 -Type: HPW-10AR -Voltage: 110V 50/60Hz -Dimensions: 250/75/H580 mm -Weight: 5.7 kg

Condition: good (used), Year of construction: 2001, I sell the 3-axis CNC working centre HOLZ-HER UNI-MASTER 7226 with beam table Year 2001. Configuration: 3-axis main spindle recently full reconditioned / Water cooled Tool magazine 6 positions HSK63 on working head 1 grooving saw X-direction Pedpfoi U Dxusx Ai Tegu Drilling head 16+4 spindles Useful working area 3100x1360mm. 2 working fields, 4 clamping areas Automatic central system of lubrication. Holzher software controller with full instructions. 2x Pump SIEMENS ELMO-L S22 2,35KW. Good condition. Available immediately.

Condition: good (used), Year of construction: 2005, functionality: fully functional, cooling capacity: 47 kW (63.90 HP), type of input current: three-phase, overall weight: 240 kg, noise level: 34 dB, input frequency: 50 Hz, Equipment: freezer, Ciat Dynaciat LGN 120 CIAT DYNACIAT LGN120 liquid chiller without condenser. manufacturer: CIAT DYNACIAT year of manufacture: 2005 Electronic control cooling capacity: 34/47kw Compressor 1pc - Hermetic SCROLL type SZ125S4CC Pgjdpfjvzrxcox Ai Tsu refrigerant R407C Evaporator - Brazed plate heat exchanger heat exchanger capacity: 4.2 liters - Plate patterns optimized for high efficiency - 19 mm armaflex thermal insulation connection: 1.5" machine dimensions: height: 121cm full core: 160cm width:79cm length:88cm weight: 190kg - Electronic expansion valves - Service valves on the liquid line ■ Control and safety devices - Water temperature control sensors - Evaporator frost protection sensor - Factory-installed evaporator water flow regulator - 24V control circuit - Connect the Touch microprocessor-controlled electronic control

Condition: used, Cooling unit, water-cooled condenser, DALEX Type DRF 2 Machine No. 38913719, Year of manufacture 1989 Flow rate 0.35 m3/h Cooling capacity 1950 Watts Operating pressure 2 to 3 bar Pjdpsg D H Ruefx Ai Tegu Refrigerant R 134a; unit was converted from R12 to R134a Operating overpressure 18 bar Pipe connection thread 3/4" Tank volume 600 x 400 x 350 mm = approx. 80 liters Mains connection 380 Volts, 50 Hz Space requirement L x W x H 900 x 800 x 1020 mm Weight 100 kg Good condition

Condition: excellent (used), Year of construction: 2004, Machine model GS501 / 3 Bottle specification: Ø 37 mm, H 85 mm, V 60 ml Hourly production: 24,000 b / h Weight: 2,200 kg Flat height of work: 1,000 ± 50 mm Electric consumption: 4.0 kW Air consumption: 200 lt / min Air pressure: 4 bar Machine model STEAM JET 2 Weight: 800 kg Flat height of work: 1,000 ± 50 mm Electric consumption: 0.5 kW Pgedpeg D Ri Aofx Ai Tju Air consumption: 80 lt / min Steam pressure: 7 bar Steam consumption: 150 kg / h Software backup from the SIEMENS PLC is available! Machine is ready to load.

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 54 kW Cooling capacity: up to 300 kW medium: water up to 200°C Max. external volume: 43 ltr at 200°C max. Flow rate: max. 230 l/min  max. delivery pressure: up to 8.3 bar Motor power: up to 3 kW Dimensions LxWxH: 1,460 x 525 x 1,200 mm  Weight approx. 330kg Circulation medium connection: flange DN40 (DIN EN 1092-1), form B1 *HIGHLIGHTS EQUIPMENT: -Control and regulation Smart Controller (7" touch display) -Heating control via solid-state relay -Control box IP54, externally ventilated -Expansion tank, heater and piping stainless steel -Heating via stainless steel tubular heating elements made of Incolloy -Dirt trap (circulation) -Unit ready for connection and mounted on castors, 2 of them steerable and with brake -Cooling and filling controlled by solenoid valve -configurable automatic filling via KW inflow or separate connection (factory-supplied via cooling water inflow) -flow measurement by differential pressure principle Pedpfxjg Ey T Ej Ai Tjgu -Level monitoring by magnetic float switch -automatic temperature-dependent system closure (not with WP7-90) -flow monitoring by recording the flow rate -Bypass between flow and return with reduced cross-section -dirty filter in the cooling water inflow, filling and return of the circulation system -Continuous bypass of the heat exchanger via 3-way motorised control valve (WP7-180/200) -System pressure monitoring via pressure transmitter in the AD tank (WP7-150/180/200) -Pressure booster pump for system filling (WP7-180/200, otherwise optional) -Safety temperature limiter (STB) in the heater and flow (WP7-200) -Pressure gauge in the supply line on the back of the unit -heat-insulated circulation circuit (WP7-150/180/200) Visit our website for more details or for other performance classes. *This unit is compliant with the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Load circuits: 1 or 2 as standard Temperature range: - 45°C to +130°C Medium: water / glycol mixture Dimensions LxWxH (without connections) : 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300kg 2-circuit: approx. 1500kg *HIGHLIGHTS EQUIPMENT: -Controls: Temperature control (standard) -Control via SPS with touch screen -Analogue and digital interfaces -Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) Podpfjg Ezarjx Ai Tjgu -Heating control via solid-state relay (SSR) -Flow measurement in the internal circuit for flow monitoring (INFO: If the water/glycol mixture is incorrect, the system automatically warns and switches off in the next step) -Pressure-controlled cooling water regulator (INFO: Much more accurate than temperature controls) Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free optional) All medium-carrying components and piping insulated for low-temperature application -Water-cooled condenser (air-cooled on request). *OPTIONS: -flow rate control: up to 100l/min, >4 l/min +/- 5% of measured value -Pressure control: 0.5 to 4.5 bar (control range) -compressed air monitoring -test piece emptying by means of compressed air - Cooling water monitoring -Limitation of inlet pressure -Other special options available on request and after technical inspection Visit our website for more details or for other performance classes. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: good (used), Tunnel passage width: 540 mm Tunnel passage height: 40 mm Quantity: 3 pieces Price per piece Psdpfx Aishinmfj Tjgu

Condition: excellent (used), Coolant pump, immersion pump, coolant pump, centrifugal pump, cooling lubricant pump -Manufacturer: Grundfos, coolant pump type SPK1-11/8 AAA -Drive: 0.25 kW 2850 rpm -Max. flow rate: 1.0 m³/h -Max. delivery head: 22 m Maximum temperature: 90 °C Podpjhtryxefx Ai Togu -Dimensions: 180/150/H590 mm -Weight: 11 kg

Condition: good (used), Year of construction: 2019, operating hours: 1,500 h, functionality: fully functional, total length: 2,420 mm, total height: 1,650 mm, total width: 13,600 mm, type of input current: three-phase, product height (max.): 250 mm, product width (max.): 630 mm, input voltage: 400 V, overall weight: 710 kg, power: 29 kW (39.43 HP), Ulma shrink tunnel. Only used as a replacement machine. Very good condition. Speed: 3 - 14.5 m/min | Double heating chamber | Dimensions: 2,420 x 1,360 x 1.650 mm | Weight: 710 kg | AIR FLOW CONTROL THROUGH FREQUENCY CONVERTER AND SOLID STATE RELAY | SHRINK TUNNEL PRECHAMBER AT INLET AND OUTLET | 220 MM HIGH CHAMBER | LEFT VERSION, PRODUCT RUNS FROM RIGHT TO LEFT | SELECTION FOR PURE "TRANSPORT MODE". Hot air fixation tunnel, an ULMA shrink tunnel model designed for shrinking film around previously packaged products. (Products previously packaged in side sealers, banding machines, flow wrappers, overlapping machines or any other packaging machine). Tunnel with high heating capacity, low consumption and low heat loss. Solid painted tubular steel frame. Easy integration into existing lines. Height-adjustable machine feet and wheels for installation and transportation. Product flow of the machine from right to left. Movable rollers with silicone coating. Electronic temperature control. Control of the transport speed. Air is evenly distributed inside the chamber, guaranteeing great energy savings. Pedpetva Sgefx Ai Tsgu Maximum insulation to reduce heat loss. Electric cabinet with ventilation. Protective devices and safety systems in accordance with CE standards. Consumption: 14.5 KW/h

Condition: used, Air cooler, evaporator, cold room, industrial cooler, cooling unit, cooler, water cooler, cooling system, refrigeration, cold storage, refrigerated container, cold room, heat exchanger Pgedpfx Aijqva Nys Tsu -Manufacturer: Goedhart, industrial cooler type DVS-O 614010 -Fan diameter: 400 mm -Operating pressure: max. 5 bar -Operating temperature: max. 50°C -Dimensions: 1410/1170/H700 mm -Weight: 129 kg

Condition: used, Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump -Cooling water pump: with cooling water tank -Pump: Unfortunately the type is no longer readable -Container content: approx. 25 liters -Total dimensions: 420/360/H3500 mm Podpfxoqbycbs Ai Tjgu -Weight: 13 kg

Condition: new, *Technical standard specification: Heating capacity: 9 kW Cooling capacity: 50 kW medium: water up to 160°C Max. external volume: 16 ltr at 160°C max. Flow rate 57l/min  max. Delivery pressure 6,0 bar Dimension L x W x H 780 x 305 x 705 mm Weight approx. 80 kg HIGHLIGHTS EQUIPMENT: Pgjdpeftm Hrsfx Ai Tsu - Smart Controller Plus 7" touch / 4.0 capable - Flow measurement, adjustable flow alarms - Return temperature display - Frequency converter for pump speed control with automatic mode for energy-optimised operation, or adjustable flow rate (in the operating range of the temperature control system) - Electronic pressure transducer in the flow - Interface via 9-pin D-Sub connector 20mA/TTY - Connection for external temperature sensor PT 100 for measuring and displaying the mould temperature - Continuous bypass of the heat exchanger with a 3-way valve to reduce deposits in the heat exchangers - More powerful pump, hydraulic parts made of VA, magnetically coupled - Tool emptying by suction - Booster pump for tool filling at high temperatures - Filling via cooling water can be switched to separate filling - SSR for heating control - IP54 splash water protection Visit our website for more details or for other performance classes. *This unit is compliant with European Directives. Other directives and standards are only complied with if stated in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: new, Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Volume: 2000 liters Machine dimensions in cm: Length: 270 Width: 154 Height: 222 Electric power: 6.5 kW Pgodpfx Aisuu Rx Rj Tsu

Condition: used, Year of construction: 2006, Overview This KHS Innopro warmer-cooler is a skid-mounted thermoregulator for wine, built in 2006 by KHS AG in Dortmund, Germany. It brings wine to a set temperature, heating or cooling as required, at up to 9,900 l/h (99 hl/h), designed for an outlet temperature of 18 °C. The core is a three-section Thermowave plate heat exchanger; stainless steel piping, pumps, pneumatically operated valves and instrumentation are mounted on one frame and run from a freestanding KHS stainless steel control cabinet with touch panel. The unit was last used in a wine bottling line. Technical data - Manufacturer: KHS AG (Dortmund, Germany) Pgsdoz Hckmspfx Ai Teu - Model: Innopro warmer-cooler - Year of manufacture: 2006 (control cabinet 2007) - Machine type: thermoregulator for heating or cooling wine, skid-mounted - Product: wine - Throughput: 9,900 l/h (99 hl/h) - Cooling section: wine from 26 °C to 18 °C, cold water 10 °C to 14 °C at 18,328 l/h - Heating section: wine from 9 °C to 18 °C via a warm-water circuit (25 °C to 21 °C, 20,516 l/h), which is heated by hot water from 100 °C to 55 °C - Plate heat exchanger: Thermowave, 3 sections, 71 plates, total heat transfer area 6.1 m² - Plate heat exchanger ratings: operating pressure 10 bar, test pressure 12.5 bar, max. operating temperature 100 °C - Power supply: 400 V, 50 Hz, 3/N/PE, rated current 25 A; control voltage 24 V DC - Overall dimensions: approx. 3,100 x 1,850 x H 2,330 mm Equipment - Thermowave plate heat exchanger with cooling, wine heating and warm-water heating sections - Warm-water circuit and membrane expansion vessel - Centrifugal pumps, including a Hilge stainless steel pump - Pneumatically operated valves and a pneumatic control valve with positioner - Pressure gauges and process instrumentation - Freestanding KHS stainless steel control cabinet with touch panel - Stainless steel skid frame with interconnecting piping Condition Used. Still installed and can be inspected by appointment. Availability Immediately. Location: Belgium.

Condition: like new (used), Year of construction: 2026, functionality: fully functional, cooling capacity: 327 kW (444.60 HP), type of cooling: air, low hours 2 circuits, R410a, scroll compressors with integrated pump and tank Pgjdez Hvz Eopfx Ai Tju Cooling Capacity: 327KW (100 refr.tons)