Used Anayak Anayak Correa Xperta 25 for sale (15,367)

Condition: good (used), Technical data for the shelf connector: Shelf system: Stow Type: Pal Rack NS Included in delivery are: Dwjdpfsmqldkex Akmoc 01x shelf connector, used for shelf distance: 360 mm total length: 360 mm cross section: U 35x25 mm material thickness: ca. 2,00 mm material color: sendzimir galvanized Drill hole diameter: 11 mm Weight: 0,480 kg | pcs. 02x screws M10 x 35 mm 02x nuts M10 General information about the article: This article is only offered for pickup. A desired transport or shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CE200 series is an electrically driven high-pressure machine for a pressure range of 200 to 2500 bar and a flow rate of 25 to 350 l/min. The frame is made of hot-dip galvanized sheet metal components and side frames made of stainless steel. Four rubber feet ensure secure positioning. The lifting eye facilitates the transport of the machine. Similar to, but not a Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE200-200-280 60 Hz -bar-l/min. CE200-200-350 and others available upon request. General specifications: ----- Power of the drive motor: 150 kW (50Hz) / 150 kW (60Hz) Volt: 400V (50Hz) - 440V (60Hz) Dodpshga S Dsfx Akmowc Amp: 160A (50Hz) - 180A (60Hz) Dimensions: 2100 mm x 1200 mm x 1400 mm Weight: 2200 kg Including standard accessories.

Year of construction: 1981, condition: good (used), machine/vehicle number: 3626, OFFER 21448 Technical data: - max. working width 2540 mm - max. cutting capacity St 40 4 mm - motorized cutting angle adjustment - cutting gap adjustment by means of graduated adjusting screws - number of hydraulic clamping bars 14 pcs Dsdpfxjhhc Ixj Akmjwc - motorized rear stop with positioning 10 - 1000 mm - number of strokes depending on cutting angle and cutting length 23 per minute - hydraulic drive 400 V / 7.5 kW - table height 1030 mm - space requirement approx. W 2500 x H 1630 x D 2150 mm - weight approx. 3600 kg - including: - sheet metal lifting with pneumatic assistance - front angle stop + support arms - electronic cutting depth adjustment - cutting line illumination - electric foot switch

Condition: used, mileage: 17,643 km, power: 110 kW (149.56 HP), first registration: 12/2011, fuel type: diesel, empty load weight: 8,500 kg, maximum load weight: 9,500 kg, overall weight: 18,000 kg, fuel: diesel, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro3, suspension: other, number of seats: 2, total length: 9,300 mm, Year of construction: 2011, operating hours: 17,643 h, construction height: 2,900 mm, Equipment: ABS, air conditioning, onboard computer, parking heater, trailer coupling, The Mercedes-Benz KAMAG WBH 25 Wiesel, a transfer vehicle with fifth wheel coupling, is ideal for use in the logistics sector. Powered by a 4,249 cc diesel engine with 110 kW (150 hp), this truck meets the requirements of the Euro 3 emissions class and offers an automatic transmission for easy operation. The vehicle was first registered in December 2011. The yellow metallic paint and the environmentally friendly yellow sticker complete the picture. With a width of 2,550 mm and a total length of 9,300 mm as well as a permissible total weight of 18,000 kg, the KAMAG WBH 25 Wiesel offers sufficient loading volume. The generous equipment includes air conditioning and Webasto thermal technology, which ensures pleasant temperatures in the driver's cab. Further details such as a well-maintained technical condition and versatile loading options make this vehicle a practical and reliable choice for businesses in the agricultural, logistics or export sectors. Mileage: 145,309 km Dwsdpfx Aker Uzl Temsc Operating hours: 17,643 hours Only sold to business owners (agriculture, freelancers, small and large businesses) or export. Errors and prior sale reserved.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 24 months, input voltage: 400 V, total length: 810 mm, total width: 560 mm, total height: 1,130 mm, tank capacity: 40 l, empty load weight: 140 kg, power: 2.2 kW (2.99 HP), New machine with a 24-month warranty. Advantages: + Robust construction + Boiler, central shaft, and spiral made of stainless steel + Spiral and boiler are driven by a motor + Mobile machine, on swivel wheels, with a fixed boiler + Flour dust hood closes gently with dampers, with automatic shut-off + Dirt protection cover for leveling feet + Short kneading time with excellent results + Control panel with push buttons for easy operation, with 3 timers + 1 reverse gear for mixing, 2 forward gears for kneading + Up to 99 different mixing/kneading programs can be stored + Switch for manual or automatic operation + Fast supply of spare parts within 1-2 working days Dedpfshyc Tasx Akmjwc Machine in stainless steel version: - Surcharge: + €1,400 net Technical data: - Flour capacity: 2 - 15 kg - Dough capacity: 3 - 25 kg - Boiler volume: approx. 40 liters - Outer diameter of the boiler: 480 mm - Motor power: 2.2 kW (kneading spiral & boiler drive) - RPM at 50Hz (1st / 2nd gear): 140 / 280 - Connection values: 400V - 3-phase - 50Hz - 16A CEE plug - Dimensions in cm: 56 x 81 x 113 (W x D x H) - Height with flour dust hood open: 140 cm - Height to the top edge of the boiler: 76 cm - Net weight: 140 kg

Condition: excellent (used), C.N.C. WORKING CENTER 3 axes (X-Y-Z) Movable panel (workpiece), movable working head. Vertical position of the panel (workpiece) Numerical Control TPA - Software Albatros Safety cabin (enclosure) of the working head Panels feeding by motorized chain/track Rubber-coated vertical rollers as fence and feeders during workpieces process In-feeding table (with motorized belts) - Out-feeding table (with motorized belts) With workpiece return system to the operator (180°) Min. useful working area (X - Y - Z) mm 260 x 40 x 10 (ca.) Max. useful working area (X - Y - Z) mm infinite x 1300 x 80 (ca.) Separate electric and command cabinet Total installed power (Kw) 35 WORKING GROUPS: Drilling heads with vertical spindles (No.) 1 Independent vertical boring spindles (No.) 24 (7 in X + 17 in Y) Drilling heads with horizontal spindles (No.) 2 Dedpfx Akeihfiiomowc Independent horizontal boring spindles (No.) 36 (9 LEFT + 9 RIGHT = 18 x 2) Drilling head motor-power (Kw) 3 x 3 (ca.) Vertical electro-spindle (No.) 1. Vertical electro-spindle motor power (Kw) 7,5 (ca.) Automatic Tools Changing System Revolver, with Tools storage plate (No. of folds-positions) 10

Condition: good (used), Year of construction: 1963, cutting length 2500 mm plate thickness 3 mm distance between columns 2050 mm blade length 2650 mm total power requirement 3 kW weight of the machine ca. 2,5 t - The scissors are equipped with an adjustable stop on the back. stop. Each side is equipped with a millimetre counter, so that the guarantee that the cuts Dwedpfx Asul Eixokmjc are true to size. - Spring-loaded automatic hold-downs prevent the material from shifting during the cutting process. material during the cutting process.

Condition: used, TECHNICAL DETAILS - Posts number : 12 - Table indexing : 12 x 30 [°] - Collet type : SCHAUBLIN W25 - Max. clamping diameter : 25 [mm] - Max. part length : 100 [mm] - Supply voltage : 3x 400 [V] - Installed power : 32 [kW] - Machine dimensions : 2700 x 2700 x 2500 [mm] - Weight : 4000 [kg] EQUIPMENT - CNC SIEMENS Sinumerik 805 - Bar feeder HYDROMAT 5.07.018-4, capacity 4200 mm - Post 1, bucking - Post 2, longitudinal drilling 30/60 - Post 3, longitudinal drilling 30/60 - Post 4, CNC turning 2 axes - Post 5, turnaround - Post 6, radial drilling 30/60 Dwsdpfxsuhbwce Akmec - Post 7, CNC turning 2 axes - Post 8, inclined drilling 30/60 - Post 9, radial drilling 30/60 - Post 10, inclined drilling 20/50 - Post 11, radial drilling 20/50 - Post 12, longitudinal drilling 30/60 - Ejection between the posts 12 and 1 - Part band conveyor - Chip conveyor KNOLL 450 K-1/2000 - Lubrication tank KNOLL KTS-25-60-T - Pump HP : 40 [bar] - Filtration KNOLL VRF 500

Condition: good (used), bore capacity in steel (diameter) 25,0/30,0 mm throat 260 mm bore stroke 120 mm number of spindle speeds 80-1400 min-1 table surface area 410 x 390 mm Dwsdpfx Akouhhzhjmec total power requirement 0,8/1,5 kW weight of the machine ca. 250 kg dimensions of the machine ca. 0,75 x 0,6 x 1,15 m

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 40 Dwedpfx Asuhv R Dskmsc Working width (min/max) mm 225 / 2500 Numerical Control PC 22 /Software WoodCommander Adjustable feeding speed (m/min) 15 - 40 Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 1000 SIZING PART (for each side): Anti-chipping Milling Unit (1 x Kw 4,5) Hogging Units KD 11 (2 x Kw 6,6) Milling Unit (vertical Joint Trimmers) UF 20/S2 (2 x Kw 4) EDGE-BANDING PART (for each side): Glueing Unit "ZERO JOINT" SCHUGOMA Kantenking (Option: EVA glue/ PU glue) Edge coils support (No 2 reels) Band Pressure zone (adjustable by N.C.) Type A Snipping (end-cutting) HL 84 (2 x kW 0,22), speed 25 m/min Rough Trimming unit BF10 (2 x kW 0,55) Multi Function Unit (Profile contour Trimming unit) FK11 (2 x kW 0,4) Profile edge scraping unit (Multi-profile, adjustable by N.C.) MN 21 Finish processing unit (Glue scraper + Buffing unit) FA 11. Spraying Unit (for polishing liquid) No. 2 Milling grooving unit SF20 (2 x kW 6,6) Motorised panel infeed roller conveyor, with panel identification system "HOMAG" Mod. POWER TBL 100/20/25

Condition: used, Year of construction: 1990, pressure 25 t throat 250 mm stroke 100 mm total power requirement 7,5 kW weight of the machine ca. 3200 kg dimensions of the machine ca. 1000 x 1700 x 2600 m Dwedpst Hw Ezofx Akmsc

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 2 h, machine/vehicle number: 101957.01, Exhibit available immediately: New Kaeser SK 25 - 8 bar screw compressor Dsdpsv Ammkefx Akmowc Controller SIGMA CONTROL 2 Pressure: 8 bar Nominal power: 15 kW Delivery rate: 2.52 m³ / min Sound level: 67 dB (A) Compressed air outlet: 1 " Dimensions length x width x height: 750 x 895 x 1260 mm Weight: 320 kg Operating hours: 2.0 Visit our store. We always have a large selection of new and used compressors in stock!

Condition: excellent (used), Year of construction: 2025, operating hours: 258 h, lifting height: 3,400 mm, fuel type: diesel, mast type: triplex, motor manufacturer: Kubota, total height: 1,990 mm, total length: 3,150 mm, total width: 1,480 mm, color: other, Number of cylinders: 3 Empty weight: 4.068 kg Engine type: Kubota D1803 CRT E5B Lifting capacity: 2.500 kg CE mark: yes Technical condition: very good Visual appearance: very good Dwsdpfszui Ttsx Akmoc = Additional options and accessories = - 3rd hydr. circuit - Pallet forks - Side shift - Work lamp(s) = Remarks = Drivetrain Stage / Tier: Stage V / Tier V General Country of production: Frankrijk

Condition: used, functionality: fully functional, machine/vehicle number: 515065G00537, Year of construction: 2012, operating hours: 5,350 h, load capacity: 2,500 kg, lifting height: 5,020 mm, free lift: 1,770 mm, fuel type: electric, mast type: triplex, construction height: 2,280 mm, fork carriage width: 980 mm, fork length: 1,200 mm, empty load weight: 4,940 kg, total length: 2,270 mm, drive type: Elektro, construction width: 1,200 mm, Electric 4-wheel forklift Chassis number: 515065G00537 Load center: 500 Fork width: 100 mm Fork thickness: 40 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Front tire type: Superelastic Front tire size: 225/75-10 Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 180/70-8 Dsdpsy Scrajfx Akmowc Rear tire condition: 80 - 100% Battery voltage: 80V Battery capacity: 620Ah Battery type: PzS Battery year of manufacture: 2017 Battery condition: 40 - 60% Side shifter, 3rd valve, front work light, heater, full cabin.

Condition: used, fuel type: diesel, Year of construction: 2015, MERCEDES ANTOS 25-32 YEAR 2015 EURO 6 LAMBERET REFRIGERATED BOX WITH INTERNAL DIMENSIONS M10.10X2.60XH2.65 REFRIGERATION UNIT CARRIER SUPRA 1150 WITH TEMPERATURE RECORDER AND MOVABLE PARTITION ATP IN FRC -20°C VALID UNTIL 04/2027 ANTEO RETRACTABLE TAIL LIFT 3,000 KG AUTOMATIC TRANSMISSION WITH INTELLIGENT STEERABLE THIRD AXLE ON-SITE FINANCING OR LEASING AVAILABLE Dwjdpfx Asy Slpzokmjc

Condition: ready for operation (used), Year of construction: 1999, overhead crane, 25 tons, approximately 20 meters span, 10 meters lifting height. Djdpfx Ajzhl E Sskmewc

Condition: good (used), Year of construction: 2019, operating hours: 6,399 h, load capacity: 2,500 kg, lifting height: 4,590 mm, fuel type: electric, mast type: triplex, construction height: 2,925 mm, empty load weight: 5,500 kg, mileage: 6,399 km, Electric duplex forklift Dwedpfx Akezw Nxbsmec Brand: Still Year of manufacture: 2019 Hours: 6,399 hours Capacity: 2,500 kg Lifting height: 4,590 mm Mast height: 2,925 mm FEATURES: FREELIFT SIDE SHIFT FORK SPREADER Extendable forks, widest position 92 cm, fork length 132 cm, extendable to 220 cm Seat heating, swivel seat with air suspension Rear-view camera and reversing sensors Radio, heater, fan for cooling Battery from 2019 with charger Automatic filling system Watch the video on YouTube

Condition: good (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 9255, spindle speed (max.): 5,635 rpm, spindle speed (min.): 3,850 rpm, type of input current: three-phase, overall weight: 900 kg, center height: 125 mm, pivoting range: 350 °, travel distance X-axis: 410 mm, travel distance Y-axis: 205 mm, travel distance Z-axis: 310 mm, grinding spindle motor power: 550 W, input frequency: 50 Hz, input voltage: 380 V, year of last overhaul: 2026, workpiece length between centers: 685 mm, For sale is a professional, high-precision Universal Tool and Cutter Grinder, model NUA-25, manufactured by PONAR Wrocław. Known for its exceptionally rigid cast-iron construction and reliability, this machine is ideal for grinding and sharpening a wide range of cutting tools, drills, milling cutters, as well as surface and cylindrical grinding.The machine is the manual version, which is highly preferred by operators for its simple maintenance and direct control feel. It is in good working condition, original paint, and has been well-preserved. Included Accessories & Equipment (Large Lot): Dwodpszw D Dlsfx Akmoc This offer includes a very valuable and comprehensive package of original attachments loaded on separate pallets: - Original dust extraction system (vacuum unit with hose) - Universal dividing/indexing head - Internal grinding attachment - Radius grinding attachment - Set of tailstocks (left & right) and steady rests - Tooth rest holders for spiral milling cutters - Assorted wheel dressers and profiling attachments - Large lot of tooling arbors, mandrels, and machine brackets

Condition: used, Technical specifications: Tank capacity: 500 l Max. pressure: 10 bar Dsdozvmmgjpfx Akmjwc Number of cylinders: 2 x 2 cylinders Power supply: 400 V Engine speed: 1400 rpm Engine power: 2 x 4 kW Overall dimensions: Length: 3100 mm Width: 650 mm Height: 1300 mm

Condition: good (used), Year of construction: 1963, Stroke = 250 mm On request, transport and loading can be organized across Europe at an additional cost. Prices excl. VAT Inspection possible by appointment. Contact us – our team will be happy to assist you. Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, ETC. Dsdpfx Akezvnd Temowc Do you need a high-quality yet affordable machine for your production? Or do you want to sell your equipment? For further information or contact options, please use the contact form.

Condition: used, Magnetic Separator, Eddy Current Non-Ferrous Separator, Metal Sorting Conveyor, Magnetic Separator, WAGNER MAGNETE 0428-25/60, used machine Manufacturer: Wagner Magnete GmbH Type: 0428-25/60 Factory identifiers: Nr: 284956 Weight: 1100 kg Electrical data: 400 V Belt dimensions: 1340 × 650 mm Overall dimensions: 2480 × 1850 × 1040 mm Design / Material: Robust industrial steel frame, with high-speed internal magnetic rotor and conveyor belt Dwedezv S A Topfx Akmsc Conveyable / Separable material: Recovery and separation of metallic and non-ferrous metals (aluminum, copper, brass, bronze) from bulk material flows (waste, e-waste, shredder residue, glass) or any type of material from which magnetic particles/materials need to be separated

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 160 mm, number of axes: 5, This 3-axis SCM PRATIX 25 CNC Wood Machining Centre was manufactured in 2015. It features a large working area of 3100x1550 mm, a 5-axis milling head, and dual tool changers with 10 and 16 positions. Equipped with a powerful 16.5 hp motor and a vacuum pump capacity of 100 m³, it supports HSK F63 clamping and Xilog Plus software. If you are looking to get high-quality milling capabilities consider the SCM PRATIX 25 machine we have for sale. Contact us for more information. Dsdpozug R Nefx Akmjwc • 5-axis milling head • Motor: 16.5 hp • Lateral tool changer: 10 positions • Turret tool changer: 16 positions • F18 drilling unit with saw in X direction • HSK F63 clamping system Additional equipment • Vacuum pump: 100 m³ • Xilog Plus software

Condition: excellent (used), functionality: fully functional, • Muratec MT 25 MYY / Robot Gantry Loader / Bar Loader. • Two C-axes. • Two Y-axes. • Highly automated machine. • 8 kg gantry loader-type robot for part loading and unloading. • 1.5-meter CNC bar loader. • Machine with 9 controlled axes. • Two twin spindles. • Two turrets. • Turrets with 15 positions each, all motorized. • Integrated spindle motor: 15 kW. • Motor starting torque: 420 N·m. • Motorized tool motor: 4 kW. • Spindle size: A2-6. • Maximum machining diameter: 370 mm. • Maximum machining length: 920 mm. • Bar feed: 67 mm. • Prismatic guides on all axes. • Two 250 mm Kitagawa hydraulic chucks on each spindle. • Separate compartment for inspecting machined parts. • Automatic finished-part pickup arm for small parts. • Automatic secondary spindle cleaning with air or coolant. • Conveyor belt for finished parts. • Automatic load control and tool wear monitor. • Part transfer system between spindles with automatic torque control. • Fanuc CNC. • Fanuc motors, servos, electronics, and programming. • Rapid traverse speeds: 20 and 25 m/min. • Main spindle speed: 3,500 rpm. • Motorized tool speed: 3,000 rpm. • Turret indexing time: 0.2 seconds. • Rear hinged chip conveyor. • Complete set of static tool holders for external and internal operations included. • Complete set of motorized axial and radial tool holders included. • Machine currently in operation. • Weight: 10,800 kg. Dsdszuxwuepfx Akmewc • Immediate delivery, unless sold prior to listing.

Condition: used, functionality: fully functional, Year of construction: 2019, load capacity: 1,300 kg, Cardboard clamp Load center: 600 ISO class: ISO class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Dwsdpfx Aszllvfjkmoc Technical condition: good Description: Year 2019 ISO 2A (41 cm) Capacity 1300 kg / 600 mm Side shift Width 1150 mm Clamps 1270x1200 mm Opening range 440-1820 mm ID OS2025

Condition: used, functionality: limited functionality, Year of construction: 2017, operating hours: 8,041 h, load capacity: 25,000 kg, fuel type: electric, drive type: Elektro, Tractor Condition: Limited operational readiness Dsdexlwtcjpfx Akmewc Technical condition: poor Battery voltage: 80V Description: oil leak from the steering gear