Used Arburg Silicone Injection for sale (2,100)

Year of construction: 2016, condition: ready for operation (used), A fully equipped Arburg injection molding machine including clean air supply Filter Fan Unit and removal robot is available. Clamping force: 1600kN, screw diameter: 45mm, max. cylinder heating: 450°C, total connected load: 85.5kW, machine elevation: 100mm, operating hours: approx. 9171h. Arburg Multilift H: axis: B, Z-axis stroke: 1400mm, conveyor belt length: 2500mm, conveyor belt width: 600mm, deposit height range: 900mm-1300mm, temperature resistance: 160°C. Documentation available. An on-site inspection is possible. Lsdpsyab I Ujfx Aiqjhl

Year of construction: 2016, condition: ready for operation (used), A fully equipped Arburg injection molding machine including clean air supply Filter Fan Unit and removal robot is available. Clamping force: 1600kN, screw diameter: 45mm, max. cylinder heating: 450°C, total connected load: 85.5kW, machine elevation: 100mm, operating hours: approx. 13361h. Arburg Multilift H: axis: B, Z-axis stroke: 1400mm, conveyor belt length: 2500mm, conveyor belt width: 600mm, deposit height range: 900mm-1300mm, temperature resistance: 160°C. Documentation available. An on-site inspection is possible. Lhjdpsyab Nfefx Aiqel

Year of construction: 2002, condition: ready for operation (used), An Arburg injection molding machine with a rotary unit on the moving mold half is available. Column spacing: 420mm, clamping force: 1000kN, opening force: 250kN, opening stroke: 500mm, min. mold installation height: 250mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg, ejector stroke: 175mm. Injection unit 350, screw diameter: 35mm/40mm/45mm, max. shot volume: 230cm³, max. injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 4300mm/1700mm/2750mm, weight: approx. 4500kg, operating hours: approx. 75443h. Documentation available. On-site inspection is possible. Lhodsyddy Ispfx Aiqjl

Year of construction: 2011, condition: ready for operation (used), A virtually new and almost fully equipped Arburg vertical injection molding machine from a laboratory is available, where its plasticizing unit was never used. Clamping force: 500kN, opening force: 30kN, opening stroke: 250mm, ejector force: 30kN, ejector stroke: 70mm, screw diameter: 25mm/30mm/35mm, nozzle contact force: 50kN, nozzle retraction stroke: 210mm, heating capacity: 9kW, heating zones: 5, hopper volume: 25l, technology level: T2, rotary table diameter: 900mm. Machine dimensions X/Y/Z: approx. 3400mm/2050mm/3500mm, weight: approx. 4200kg, operating hours: 9201h, machine cycles: approx. 120k. The machine was used exclusively for composite materials such as carbon fiber and Kevlar. Documentation available. An on-site inspection is possible. Lsdpfjzd Ehxex Aiqohl

Condition: used, Year of construction: 2020, operating hours: 8,555 h, functionality: fully functional, clamping force: 1,500 kN, heating capacity: 19 kW (25.83 HP), pump power: 71 W, power: 53.5 kW (72.74 HP), input frequency: 50 Hz, input voltage: 400 V, input current: 90 A, We are offering this used ARBURG 470 C 1500-400 injection molding machine, manufactured in 2020, from ongoing production. Includes INTEGRALPICKER. Type: 470 C 1500-400 Machine No.: 254634 Year of Manufacture: 05/2020 Operating Voltage: 400 V, 50 Hz Lhjdpfx Aiozhar Heqjl Control Voltage: 24 V Rated Current Motor/Heater: 71 / 19 A Total Current: 90 A Total Connected Load: 53.5 kW Pump Operating Hours: 8555 40 mm plasticizing cylinder set (without nozzle) Open nozzle 40 mm with internal thread for screw-in nozzle tips Internal thread up to injection unit 290: M 24 x 1.5 Internal thread from injection unit 400: M 36 x 2 Price: €48,000.00 Available from the end of December 2026. If you have any questions or require further information, please send us a message or call us.

Condition: excellent (used), Like-new condition ejector or diverter gate assembly, complete, for an ARBURG 270 or 320. Lhodpfxezub A Ho Aiqsl

Condition: excellent (used), Year of construction: 1998, Min. tool mounting height: 200 mm Max. plate distance: 550 mm Lhsdpfozkfh Ssx Aiqjl Column spacing: 270 x 270 mm Screw diameter: 15 mm Clamping force: 400 kN Includes temperature control unit Includes handling robot The machine is in very good condition and is operational.

Condition: used, Year of construction: 2001, operating hours: 38,850 h, clamping force: 25 kN, displacement volume: 20 cm³, injection pressure: 1,810 bar, overall weight: 1,900 kg, screw conveyor diameter: 18 mm, terms of delivery: EXW (ex Works) delivery time: on request Ledpsyt R S Aofx Aiqohl terms of payment: 100% prior to delivery

Year of construction: 2008, condition: ready for operation (used), A vertical injection moulding machine from ARBURG is offered. Clamping force: 50t, table size X/Y: 500mm/420mm, max. shot volume: 65cm³, min. opening width: 272mm (172mm), max. opening width: 522mm (422mm), hydraulic/pneumatic cascades: 2/4, hydraulic/pneumatic core pulls: 0/0, hydraulic operating hours: 6979h, automatic operating hours: 4696h, total cycles: 142609. Including shuttle table. Documentation available. Inspection possible by arrangement. Lodpjzta D Hsfx Aiqshl

Condition: excellent (used), Two ARBURG ALLROUNDER 270 S injection molding machines from a cleanroom production environment. Lsdpfx Ajzrvhleiqehl In excellent condition! Price for both machines: only €14,000.

Condition: excellent (used), Year of construction: 2005, operating hours: 36,012 h, clamping force: 1,500 kN, screw diameter: 45 mm, clearance between the columns: 470 mm, displacement volume: 318 cm³, injection pressure: 2,470 bar, injection weight: 291 g, mold height (min.): 250 mm, Arburg 470C-1500-800 injection molding machine with conveyor belt and picker (257) Year of production: 2005 Producer: Lhsdpfxjzfhx Ae Aiqel Arburg Injection molding machine condition: used Screw diameter [mm]: 45 Injection weight [g]: 291 Injection pressure [bar]: 2470 Closing force [kN]: 1500 Column spacing [mm]: 470 x 470 Plate size [mm]: 650 x 650 Min. mold height [mm]: 250 Control type: Selogica Language: german Installed power [kW]: 44.9 Working hours [h]: 36012 Weight [kg]: 4860 Dimensions [mm]: 4400 x 1600 Core string: 1x Robot socket: euro12 Feed hopper: NO

Condition: excellent (used), Year of construction: 2009, operating hours: 78,099 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 25 mm, clearance between the columns: 520 mm, displacement volume: 71 cm³, injection pressure: 1,550 bar, injection weight: 65 g, opening stroke: 925 mm, total height: 2,800 mm, overall weight: 10,700 kg, Equipment: documentation/manual, Arburg 520 S 1600 290/70 2K incl. Multilift H – a well-maintained, fully functional 2-component injection molding machine. The machine comes from a top-notch production facility. According to the operator, machine availability was always a top priority: the system was regularly and carefully maintained and operated continuously with additional oil filtration. It is in very good, operational condition and can be put into operation shortly after connection. Equipment and technical highlights: • Year of construction 2009 • 12.3 million cycles / 78,099 operating hours in automatic mode • 2-component version with horizontal injection unit 290 and vertical injection unit 70 • Injection unit 1: screw diameter 25 mm, max. 71 cm³ • Injection unit 2: screw diameter 18 mm, max. 21 cm³ • Opening stroke 925 mm • Electric rotary table • 12-zone hot runner system integrated • 3 x core pull • 2 x blow-out, including control for needle valve • Interfaces for temperature controllers and dryers • Various customer-specific inputs and outputs Including Arburg Multilift H, load capacity 6 kg: • 2 x vacuum • 5 x double-acting grippers • Z-axis servo, 800 mm • C, G, X, and B axes pneumatic • Various inputs and outputs, including gripper monitoring The machine is fully functional. Documentation/manual available. Lhedpfx Aisxzix Aoqel An excellent opportunity for a user looking for a well-maintained and immediately usable 2K injection molding machine with automation.

Condition: used, Year of construction: 2012, operating hours: 55,400 h, clamping force: 100 kN, displacement volume: 201 cm³, injection pressure: 2,000 bar, overall weight: 5,400 kg, screw conveyor diameter: 40 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Ljdpfx Aieylpy Ajqshl

Condition: used, Year of construction: 2012, operating hours: 55,800 h, clamping force: 100 kN, displacement volume: 201 cm³, injection pressure: 2,000 bar, overall weight: 5,400 kg, screw conveyor diameter: 40 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Lodpfx Ajylpyvsiqjhl

Condition: good (used), Year of construction: 2008, Ref. no.: 18643 Manufacturer: ARBURG Type: 470 C 1500-400 Golden Editions Year of construction: 2008 Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Distance between tie bars: 470 x 470 mm Mould height min.: 250 mm Opening width: 750 mm Injection unit Screw diameter: 35 mm Injection volume: 154 cm³ Shot weight: 141 g Injection pressure: 2500 bar Measurements and weight Dimensions: 4,6 x 1,6 x 2,1 m Machine weight: 4850 kg Additional information & extras Core pull: 1 pcs Further information: Communication card for ProSeS interface is available (OPC-UA). Robot interface is available (EUROMAP 67). he Golden Edition is a special version of the well-established ALLROUNDER C series, known for its optimized hydraulic performance, stable production process, and high reliability. The machine has a clamping force of 150 tons and is ideally suited for the production of technical plastic parts as well as applications requiring high quality standards. Ledpfxoxvy Rle Aiqjhl Key advantages of this series include: * Robust and durable construction * High process stability and repeatability * Reliable ARBURG control system * Good availability of spare parts * Suitable for continuous industrial operation The Golden Edition version also stands out with its enhanced performance and excellent price-performance ratio in the used machinery market. Thanks to its versatility, this machine is widely used in industries such as automotive supply, technical plastic parts, and serial production.

Condition: good (used), Year of construction: 1994, Ref. no.: 17540 Lhedpfoyiz U Tsx Aiqel Manufacturer: ARBURG Type: 270 C 500-100 RUNHOUR Only 100 Year of construction: 1994 Clamping unit Clamping force: 50 ton Opening stroke: 350 mm Distance between tie bars: 270 X 270 mm Mould height min.: 200 mm Platen size (h x v): 405 X405 mm Injection unit Screw diameter: 25 mm Injection volume: 67 cm³ Shot weight: 61 g Injection pressure: 2500 bar Measurements and weight Dimensions: 3,3 X 1,5 X 2,0 m Machine weight: 2400 kg Further information: Laboratory Machine with Exceptionally Low Operating Hours The offered ARBURG 270 C 500-100 was manufactured in 1994 and originates from the training and laboratory department of a university. The machine was not used in regular production and was mainly operated for educational and testing purposes. The control system shows only approximately 100 operating hours and just 867 machine cycles. The machine is equipped with a hydraulic drive system and the proven ARBURG Dialogica control unit. In addition, it features an integrated crane system to facilitate mould and component changes. The scope of supply also includes an unused spare screw with a diameter of 15 mm and a complete additional plasticizing unit, providing extra flexibility for different applications. Due to its exceptionally low usage, documented history, and valuable additional equipment, this machine represents a rare opportunity on the used machinery market.

Condition: used, Injection molding machine ARBURG, Type Allrounder 320 C 600-100 Serial No. 189356, Year of manufacture 09/2002 Clamping force 60 tons Screw diameter 25 mm Dosing volume max. 49 cm3 Injection pressure max. 1570 bar Ledpezqglrofx Aiqshl Opening stroke - platen stroke max. 350 mm Platen dimensions 446 x 446 mm Tie bar spacing 320 x 320 mm Mold height min.: 200 mm Platen spacing min.: 200 mm Platen spacing max.: 550 mm Centering of fixed and moving platens 125 mm Heater power 4.9 kW Motor power hydraulic pump 15 kW Mains connection 400 Volt, 50 Hz, 19.9 kW - Machine control SELOGICA - Two controllable hydraulic circuits for core pullers - Injection unit with COLORTRONIC material hopper for automated granule feed - U-version interface - HHG interface - Control ARBURG MULTRONICA with foil keypad and integrated display - 88790 operating hours recorded (power-on hours) - 44925 operating hours of the hydraulic pump (hydraulic on) - Control cabinet fixed to the machine - Work area protective doors at the front and rear, manually sliding with safety switches - Mobile control panel with function keys, mounted on the back of the machine Space requirement L x W 3650 x 1700 mm Height with material hopper 2200 mm Weight 3000 kg Good condition

Condition: excellent (used), Year of construction: 2003, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 190332, Equipment: documentation/manual, Injection molding machine 3 colors (horizontal /vertical/ and 3. in L-position with protective housing) The machine can be used as a 2 colour/2K machine and the 3rd can be deactivate immediately available from our warehouse in Hannover Make: Arburg Type: 420C 1000-150/150/60 year of construction 2003 Control: Selogica Hours: 21200 h without turntable +++++clamping unit +++++ Clamping force: 1000 kN / 1000 to. tie bar distance: 420 x 420 mm platen size: 795 x795 mm tool height 300 mm distance platens max. 950 mm ejector 225 mm /66 kN Lodpfxsgrzh Ee Aiqshl ++++Injection unit 1 (150 unit) ++++ Screw size: 15 mm (high shut-off fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 2 (150cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 3 (60cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2080 bar Extras 2x core pull 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection molding machine mold clamping force 1000 kN voltage 400 V / 50 Hz 1 Vertical injection unit instead of clamping tie bars mounted on carriers for 2nd injection unit, manually operated, working position adjustable between 70 and 250 mm VE-404/02 1 Open nozzle 15 mm low-wear, without heating tape (1.SPE 150) VE-902/00 1 Technology level 2 - servo-controlled Hydraulic system -two control pumps for controlled machine movements, path-dependent, controlled target ramps. The build-up of the tool clamping force programmable + controlled. Clamping force is servo-controlled via second pump. The nozzle contact force programmable. The contact force can be set manually, the value is maintained in a controlled manner. This technology level is a prerequisite for simultaneous movements of the nozzle, ejector and optional core pullers. Including equipment package for "extended travel movements". VE-132/03 1 Technology level 3 Hydraulic system with 3 control pumps for simultaneous movements of the main axes and for faster movements of the secondary axes. For the 2-K machines as hydraulic system for the 2nd injection unit (prerequisite is technology level 2, VE 132/03) VE-130/40 1 heating tape for open nozzle VE-320/00 1 Injection unit 150 for vertical injection into mold partition for 2-component processing VE-136/02 1 position controlled screw with control valve at the injection unit, incl. controlled back pressure, nozzle contact force manually adjustable VE-561/20 1 position-controlled screw with control valve for multi-component machines, incl. controlled back pressure, nozzle contact force manually adjustable - for injection unit 2 VE-561/30 1 injection unit 60 for horizontal injection into mold partition as 3rd injection unit for multi-component processing (L-position) VE-906/00 1 for VE 906/00 injection unit 60 in L-position: unit lowered by 70 mm, incl. special parting line full protection VE-907/00 1 Plasticizing barrel set 15 mm (without nozzle), with advanced feed and pressure reducing valve, in highly wear resistant design 1 Open nozzle 15 mm wear-resistant, without heating band (L-position) VE-909/00 1 Nozzle tip with radius 15 (L-position) VE-910/00 1 Heating tape for open nozzle (L-position) VE-911/00 1 Position-controlled screw for the third injection

Condition: like new (used), Year of construction: 2020, Clamping force: 25 ton Version: Shuttle table Opening force/stroke min.- max. : 100/225 mm Mould height variable min.- max. : 122-222 mm Shuttle table stroke: 500 mm Wight on shuttle table. max. :120 kg Ejector force/stroke max. : 16/40 kN/mm Screw: 22 mm Effective screw length L/D : 20 Screw stroke max. : 90 mm Stroke volume: 34 cm3 Lsdpfx Asvl Skaoiqehl Shot weight: 31 g Injection pressure: 2000 bar Working hours: 7397 h

Condition: like new (used), Year of construction: 2018, Clamping force: 25 ton Version: Shuttle table Opening force/stroke min.- max. Lhedpfsyfg D Ssx Aiqsl : 100/225 mm Mould height variable min.- max. : 122-222 mm Shuttle table stroke: 500 mm Wight on shuttle table. max. :120 kg Ejector force/stroke max. : 16/40 kN/mm Screw: 22 mm Effective screw length L/D : 20 Screw stroke max. : 90 mm Stroke volume: 34 cm3 Shot weight: 31 g Injection pressure: 2.000 bar Working hours: 15.571 h

Condition: excellent (used), Year of construction: 2020, clamping force: 300 kN, Clamping force: 300 t Screw diameter: 60 mm Distance between tie bars V: 720 mm Distance between tie bars H: 720 mm Type: Horizontal Drive: Hybrid Lhedjyfh Rmjpfx Aiqjl Hours: 23000 core puller 1 pneumatic core puller controll euromap 67 2 servo pumps. machine is without robot and accessories.

Condition: excellent (used), Year of construction: 2020, clamping force: 2,000 kN, Equipment: documentation/manual, Clamping force: 200 t Screw diameter: 50 mm Distance between tie bars V: 570 mm Distance between tie bars H: 570 mm Type: Horizontal Drive: Electric Hours: 34535 Ljdpjyfh Uljfx Aiqshl Available 3 units (2020-2019)

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 (vertical machine with rotary table 1200mm) Clamping unit 2000T Table diameter: 1200mm Angle rotation: 180 degrees Lhodpfxowugczj Aiqjl Clamping force: 200 tons Opening force max. kN/mm: 115/500 Platen daylight max. : 600 mm Injection unit Screw diameter: 45 mm Shot volume: 318 cm3 Shot weight: 291 g Injection pressure: 2470 bar 1. Model: T model 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for splined coupling geometry 5. Control system: SELOGICA ‘direct’ controller 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme 27. Display languages: IT/EN/SK

Condition: good (used), Year of construction: 2000, Arburg 420 C 1000-250 (2000) Clamping force : 100 t Screw diameter : 30 mm Distance between tie bars : 420 x 420 Shot weight : 100 g Lhjdpfx Asxqcrzoiqsl Max mold hight : 200 m Max opening : 730 g Hydraulic cores : 0 \+ robot TECHNOMATIC

Condition: excellent (used), Year of construction: 2009, Arburg 370 S 600-290 (2009) Screw ø 35 mm CLAMPING UNIT Clamping force: 600 kN Closing force: 38 kN Opening force / increased: 24 / 160 kN Opening stroke: 400 mm Mould height min.: 200 mm Daylight max.: 600 mm Distance between tie bars: 370 × 370 mm Platen size: 510 × 510 mm Weight of mov. mould half: 360 kg Ejector force: 125 kN Ejector stroke: 125 mm HYDRAULICS Drive power: 15 kW Total connected load: 23,9 kW 💉 INJECTION UNIT — ø 35 mm Screw stroke max.: 150 mm Effective screw length L/D: 20 Injection volume max.: 132 cm³ Shot weight max.: 20,5 g PS Material throughput max.: 10,5 kg/h PS Injection pressure max.: 2000 bar Injection flow max.: 140 cm³/s Injection flow with accumulator: 430 cm³/s Back pressure max.: 350 / 200 bar Screw speed max.: 54 m/min Screw torque max.: 380 Nm Nozzle contact force: 60 kN Nozzle retraction stroke: 240 mm Heating zones / power: 4 zóny / 5,8 kW Nozzle heating: 0,6 kW Hopper capacity: 50 l DIMENSIONS & WEIGHT Oil capacity: 135 l Net weight: 3300 kg Electrical connection: 80 A Lhedpfx Aszrv Dtoiqel