Used Arctiko Ultf 80 for sale (16,845)

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Fgsdey Hkd Hjpfx Ad Nob Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 1 h, load capacity: 8,000 kg, lifting height: 5,070 mm, free lift: 1,615 mm, fuel type: diesel, mast type: triplex, construction height: 2,950 mm, power: 81 kW (110.13 HP), fork carriage width: 2,200 mm, fork length: 1,200 mm, empty load weight: 12,169 kg, total length: 3,970 mm, drive type: Diesel, construction width: 2,200 mm, Diesel Forklift Load center: 600 mm Fork width: 150 mm Fork thickness: 60 mm ISO class: ISO Class 4 = 5,000 - 10,000 kg Mast type: Triplex Fodpfey Hm Dcex Ad Njgb Transmission: Torque converter Condition: New machine Technical condition: New Front tire type: Superelastic Rear tire type: Superelastic Description: - 2.9-liter HMC D4CC diesel engine, 81 kW, EU Stage V - Common Rail incl. DOC, SCR, and DPF - Kessler front axle - ZF transmission - Engine power selector - Reduced noise level in the cabin - Multifunctional digital display - Air conditioning with multiple air vents - Improved visibility thanks to one-piece curved windshield - Automatic parking brake: OPSS system - Speed limiter - Slope indicator - Easy maintenance access - Tiltable cabin with heating and A/C - Engine self-diagnosis and consumables management - Automatic particulate filter and SCR regeneration - Grammer seat with belt, contact switch, and armrest 3rd valve, 4th valve, rear work lights, front work lights, heater, load guard, particulate filter, full cabin, air conditioning, full free lift, CE certificate, twin tires, interior mirror, exterior mirrors, windshield wiper, single pedal, LED, seat,

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 230 V, Minipack Pratika 80 MPS The Minipack Pratika 80 MPS is a fully automatic side sealing packaging machine. It is designed for products with a maximum height of 360 mm and is also suitable for very long products. – Fully automatic side sealing packaging machine (continuous side sealing) Fgedpfjyant Rjx Ad Njb – Maximum product height: 360 mm – Product lengths over 2 m possible – Usable seal bar dimension: 700 mm – Maximum film roll dimensions: Ø 350 × 800 mm – Infeed conveyor height: 915 mm – Machine dimensions (closed): 2,785 × 940 × 1,770 mm – Machine dimensions (open): 2,785 × 940 × 2,280 mm – Output: up to 3,000 packs/h (depending on product/film)

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, The versatile all-rounder combines outstanding workmanship with a broad range of applications. Our machine also offers intuitive operation, optimizing your packaging processes. A high-quality unwind unit with double automatic roll centering ensures precise material guidance. Furthermore, our active material feed system guarantees optimal web tension for flawless packaging results. The highly efficient brushless motors and user-friendly color touchscreen control system provide maximum flexibility during format changes, significantly simplifying your packaging operations. The machine is equipped with memory storage for machine parameter settings and can save up to 50 different products. For this packaging line, we also offer fully and semi-automatic feeding solutions, which can be retrofitted upon request. The machine is available with either left- or right-hand operation and features a rotary cross-sealing unit with an electronic overload protection switch for maximum safety. Thanks to its performance, versatility, and technological advancement, our machine is ideally suited for packaging food products such as brioches, cakes, candies, pralines, chocolate, as well as pharmaceutical products and various gift items. If you are looking to optimize your packaging processes with high production capacity and superior quality, Impuls Packaging is your ideal partner. System features: 1. Chain conveyor belt 2.6 meters in length (other lengths available on request) 2. Adjustable bag former 3. Single film loader + automatic film centering device 4. Rotary end sealing, single sealing jaw 5. Robust central fin seal structure 6. Four servo drive controls - Active material feed shaft - Central sealing - End sealing - Conveyor belt 7. HMI control panel 8. Three individual temperature controllers 9. Housing made of stainless steel 304 10. Documentation in the local language 11. Print mark control 12. Programmable bag length or fully automatic product length detection 13. Standard direction: left to right Technical Parameters Fsdowld Upopfx Ad Negb 1. Product length: L120–500 mm 2. Product width: W30–200 mm 3. Product height: H10–80 mm 4. Packaging speed: up to 100 products/min (depending on product, bag length, and material) 5. Maximum film width: 600 mm 6. Connection voltage: 1Ph. 220V 50Hz 7. General power: approx. 4.8 kW 8. Machine weight: approx. 550 kg 9. Machine dimensions: approx. 4280 x 1200 x 1230 mm

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, The all-rounder combines outstanding build quality with a wide range of applications. Our machine also offers intuitive operation to optimize your packaging processes. A high-quality material unwinder with dual automatic roll centering ensures precise material guidance. Furthermore, our active material advance unit guarantees optimal web tension for flawless packaging results. The highly powerful brushless motors and user-friendly color touchscreen control system give you maximum flexibility during format changes and greatly simplify your packaging operations. The machine features memory slots for storing machine parameters—up to 50 different products can be saved. For this packaging line, we also offer fully and semi-automatic infeed systems, which can be retrofitted at your request. The machine is available in both directions of operation and features rotary cross-sealing with an electronic overload protection switch for maximum safety. Thanks to its powerful performance, versatility, and technological sophistication, our machine is ideally suited for packaging food items such as brioches, cakes, candies, pralines, chocolate, as well as pharmaceutical products and various gift articles. If you wish to optimize your packaging processes with strong production performance and high quality, Impuls Packaging is your ideal partner. Fgedpowld Tfefx Ad Nob System features: 1. Chain conveyor belt, 2.6 meters in length (other lengths available on request) 2. Adjustable bag former 3. Single film loader + automatic film centering device 4. Rotary end seal, single sealing jaw 5. Robust, central fin seal structure 6. Four servo-driven systems: - Active material advance shaft - Center sealing - End sealing - Conveyor belt 7. HMI control panel 8. Three individual temperature controllers 9. 304 stainless steel housing 10. Documentation in the local language 11. Register mark control 12. Bag length programmable or with fully automatic product length detection 13. Standard operation from left to right Technical specifications: 1. Product length: L40–600 mm 2. Product width: W30-200 mm 3. Product height: H10–80 mm 4. Packaging speed: up to 80 products/min 5. Maximum film width: 600 mm 6. Power supply: 1Ph. 220V 50Hz 7. Total power: approx. 4.7 kW 8. Machine weight: approx. 550 kg 9. Machine dimensions: approx. 4300 x 1190 x 1210 mm

Condition: good (used), Year of construction: 2012, functionality: fully functional, - Max. bar length: 1,615 mm depending on the spindle of the automatic lathe - Material diameter: 5-80 mm - Material support surface: 650 mm Fgjdpsy Hth Uofx Ad Nob - Dimensions LxWxH: 2260 x 1200 x 1400 mm - Weight approx. 600 kg

Year of construction: 1993, condition: good (used), motorised transport table with rollers and. var. speed dimensions L x W x H = 2950 x 1300 x 900 mm feed speed var. height adjustable +/- 15 cm max. weight load 50 kg/ m Advise used machines: Fgodpfogvvn Esx Ad Neb • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, Thin layer from 2 mm thickness Maximum cutting accuracy up to ± 0.15 mm Minimal kerf, cutting thickness from 1.3 mm Ideal for the cutting of dried and wet wood or alternative materials Surface of the thin layer ready for gluing without need of further processing steps Friendly user electronic control Two programmable speeds of the carpet (0-30 m/min) for the best cutting quality and to safeguard the blade life Optical sensor to start cutting cycle and speed change Ground table “Flexam” belt feeding for the best performance 6 rubber idler rollers adjustable in height, for opening/closing to ensure the best pneumatic pressure on the workpiece during feeding and cutting Oleo-pneumatic tensioning of the blade for better cutting performance Top and bottom ‘’Chaco’’ blade-guides which guarantee the best stability blade during cutting Internal/external lubrication of the blade to remove residues of resins and chips 4 dust extraction to optimize the suction of dust and chips Cutting height of 400 mm (500 mm optional) Cutting width up to 400 mm High quality powerful motor kW 15 (HP 20) Ethernet connection for on line service Carbide or stellite blades for best cutting performance DM of saw wheels mm 800 Max. cutting height mm 400 fixed working table mm 1290 x 800 Max. saw blade width mm 54 x 0,9 Max. & min. saw blade length mm 5530 / 5380 motor Kw 15 (HP 20) suction connection nr 2x Ø 120 & 1 x Ø 100 compressed air requirement bar 6/ 27 ltd machine weight Kg 880 feed speed m/min 0 - 30 height of feeder belt mm 300 length of feeder mm 750 feeder roller DM mm 160 Max. feeder opening mm 200 Fgsdpfxsdcd Dle Ad Nsb Max. fence opening mm 200 feeder speed var. mt/ min 0-30

Condition: good (used), functionality: fully functional, Press Brake Brand: AMADA Model: HFT 80/25 Capacity: 2500 x 80T 4 axes Distance between uprights: 1800 mm Dimensions: 3500 x 1500 x 2100 mm Weight: 6,500 kg Equipped with new and used tooling Fgodpswivddofx Ad Nsb

Condition: ready for operation (used), Centre height: 80 mm Spindle bore: 18 mm Fgodpjyv Dy Tjfx Ad Neb Spindle mount: MT 3 Swiveling range: +110 / -20° Weight: 33 kg

Condition: used, power: 160 kW (217.54 HP), New hydraulics, new knives, new bearings Drive: 160.0 kW Rotor knives: 5x2 Stator knives: 2x2 Rotor diameter: 700 mm Rotor width: 1200 mm Feed opening: 800 x 1200 mm Fodpoy Ic Nksfx Ad Nsgb

Condition: used, Cutting mill Manufacturer: HERBOLD MECKESHEIM Type: SMS 80/160 Fodjy Icwbopfx Ad Negb Rotor 800 x 1600 mm wide Drive motor 250 kw

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Fgodpfsy Icq Uex Ad Nsb Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: used, power: 160 kW (217.54 HP), Granulator TRIA 120-80 FN / Granulators New hydraulics, new knives, new bearings Drive: 160.0 kW Rotor knives: 5x2 Stator knives: 2x2 Rotor diameter: 700 mm Rotor width: 1200 mm Fsdoy Ichtspfx Ad Nsgb Feed opening: 800 x 1200 mm

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Fodpfsy Icg Asx Ad Njgb Throughput capacity up to 5 t/h depending on material and grain size

Condition: used, Cutting mill / cutting mills Fgsdpsy Ib U Sefx Ad Nsb Manufacturer: HERBOLD MECKESHEIM Type: SMS 80/160 Rotor 800 x 1600 mm wide Drive motor 250 kw

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Fgedpfx Adsy Ibiij Nsb Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: used, Wheel Loader Zeppelin ZL 80 Year of manufacture: 1999 Condition: - Rust (see pictures) - Needs repair Attachments: - Pallet fork - Hydraulic tipping bucket ZL 80 SW Width: 1.85m Year of manufacture: 2021 Fgsdpfx Ajy Itzqod Nob - Snow plow blade

Condition: excellent (used), Year of construction: 2016, pressing force: 80 t, DIXI 80 SLD horizontal press Semi-automatic press system with 80 tons of pressure for economical volume reduction of residual materials (recyclable) in industry and retail: Cardboard Tetra packs Films Foams PET bottles Insulating mats and other compressible materials. Fsdpfxjy Iykxj Ad Njgb Pressure force : 80 t Electrical connection : 400 V 50 Hz; 11 kW; D-32 A (option: K-32 A) Cycle – average approx. : 35 sec Length approx. : 4,320 mm (without lifting device and pallet) Width approx. : 1,830 mm Height approx. : 2,620 mm (with hopper) Loading opening (WxD) – housing : 1,040 x 1,110 mm Bale dimensions : 1,120 x 1,120 x 1,200 mm Bale weight approx. : 500 – 600 kg Tying 4 manual, wires with quick-release eyelets Machine weight approx. 8,000 kg (without bale)

Condition: used, functionality: fully functional, machine/vehicle number: 2482148, Year of construction: 2019, load capacity: 4,990 kg, lifting height: 5,000 mm, free lift: 140 mm, load center: 600 mm, fuel type: electric, construction height: 4,156 mm, power: 25.2 kW (34.26 HP), motor manufacturer: Toyota, battery capacity: 840 Ah, battery voltage: 80 V, battery weight: 2,178 kg, fork carriage width: 1,170 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 60 mm, turning radius (outer): 2,686 mm, front tire type: cushion tires (black), front tire size: 28x12,5-15, rear tire type: cushion tires (black), rear tire size: 23x9-10, overall weight: 7,721 kg, total height: 2,500 mm, total length: 4,272 mm, total width: 1,440 mm, color: red, Equipment: UVV, pallet forks, Technical data Year of manufacture: 2019 Drive: electric Motor: 25.2 kW Load capacity: 4.99 t Load center: 600 mm Overall dimensions (L x W x H): 4.27 m x 1.44 m x 2.50 m Fork dimensions (L x W x H): 1.20 m x 0.150 m x 0.060 m Turning radius: 2.68 m Fedpfxoyqzpae Ad Nsgb Weight: 7721 kg Front tyre size: 28x12.5-15 Rear tyre size: 23x9-10 Lifting height: 5.00 m Free lift: 140 mm Travel speed: 18 km/h Max. gradeability with/without load: 13%/23% Mast height extended: 4.15 m Fully operational, general signs of use, UVV inspected

Condition: used, functionality: fully functional, machine/vehicle number: 2482138, Year of construction: 2019, load capacity: 3,000 kg, lifting height: 6,000 mm, free lift: 125 mm, load center: 500 mm, fuel type: electric, construction height: 4,045 mm, power: 20 kW (27.19 HP), motor manufacturer: Toyota, battery capacity: 560 Ah, battery voltage: 80 V, battery weight: 1,558 kg, fork carriage width: 1,070 mm, fork length: 1,000 mm, fork width: 100 mm, fork thickness: 45 mm, ground clearance: 95 mm, turning radius (outer): 2,032 mm, front tire type: cushion tires (black), front tire size: 23x10-12, rear tire type: cushion tires (black), rear tire size: 18x7-8, overall weight: 5,199 kg, total height: 2,395 mm, total length: 3,334 mm, total width: 1,195 mm, color: red, Equipment: UVV, pallet forks, Technical Specifications Year of Manufacture: 2019 Drive: Electric Motor: 20 kW Load Capacity: 3.00 t Load Center: 500 mm Overall Dimensions (L x W x H): 3.33 m x 1.20 m x 2.40 m Fork Dimensions (L x W x H): 1.00 m x 0.10 m x 0.045 m Turning Radius: 2.03 m Weight: 5199 kg Front Tire Size: 23x10-12 Rear Tire Size: 18x7-8 Fgjdpjyqzpmsfx Ad Nob Lifting Height: 6.00 m Free Lift: 125 mm Travel Speed: 20 km/h Max. Gradeability with/without load: 21% / 29% Mast Height Extended: 4.04 m Fully functional, general signs of use, UVV

Condition: used, functionality: fully functional, machine/vehicle number: 2482128, Year of construction: 2019, load capacity: 3,000 kg, lifting height: 6,000 mm, free lift: 125 mm, load center: 500 mm, fuel type: electric, construction height: 4,045 mm, power: 20 kW (27.19 HP), motor manufacturer: Toyota, battery capacity: 560 Ah, battery voltage: 80 V, battery weight: 1,558 kg, fork carriage width: 1,070 mm, fork length: 1,000 mm, fork width: 100 mm, fork thickness: 45 mm, ground clearance: 95 mm, turning radius (outer): 2,032 mm, front tire type: cushion tires (black), front tire size: 23x10-12, rear tire type: cushion tires (black), rear tire size: 18x7-8, overall weight: 5,199 kg, total height: 2,395 mm, total length: 3,334 mm, total width: 1,195 mm, color: red, Equipment: UVV, pallet forks, Technical data Year of manufacture: 2019 Drive: Electric Motor: 20 kW Lifting capacity: 3.00 t Load center: 500 mm Overall dimensions (L x W x H): 3.33 m x 1.20 m x 2.40 m Fork dimensions (L x W x H): 1.00 m x 0.10 m x 0.045 m Turning radius: 2.03 m Weight: 5,199 kg Fgedpfxeyqzpgs Ad Nob Front tire size: 23x10-12 Rear tire size: 18x7-8 Lift height: 6.00 m Free lift: 125 mm Travel speed: 20 km/h Max. gradeability with/without load: 21% / 29% Height of mast extended: 4.04 m Fully functional, general signs of use, UVV

Condition: used, functionality: fully functional, machine/vehicle number: 2482088, Year of construction: 2019, load capacity: 4,990 kg, lifting height: 5,000 mm, free lift: 140 mm, load center: 600 mm, fuel type: electric, construction height: 4,156 mm, power: 25.2 kW (34.26 HP), motor manufacturer: Toyota, battery capacity: 840 Ah, battery voltage: 80 V, battery weight: 2,178 kg, fork carriage width: 1,170 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 60 mm, ground clearance: 150 mm, turning radius (outer): 2,686 mm, front tire type: cushion tires (black), front tire size: 28x12,5-15, rear tire type: cushion tires (black), rear tire size: 23x9-10, overall weight: 7,721 kg, total height: 2,500 mm, total length: 4,272 mm, total width: 1,440 mm, color: red, Equipment: UVV, pallet forks, Technical data Year of manufacture: 2019 Drive: electric Motor: 25.2 kW Load capacity: 4.99 t Load center: 600 mm Overall dimensions (L x W x H): 4.27 m x 1.44 m x 2.50 m Fork dimensions (L x W x H): 1.20 m x 0.150 m x 0.060 m Turning radius: 2.68 m Weight: 7721 kg Front tyre size: 28x12.5-15 Rear tyre size: 23x9-10 Lifting height: 5.00 m Free lift: 140 mm Fgsdpfxeyqzn As Ad Njb Travel speed: 18 km/h Max. gradeability with/without load: 13%/23% Mast height extended: 4.15 m Fully operational, general signs of use, UVV inspected

Condition: used, Year of construction: 2009, x-travel 800 mm y-travel 700 mm Fgodpfx Adsy Hxrre Nsb z-travel 550 mm Control Heidenhain TNC 530

Condition: used, Year of construction: 2017, operating hours: 13,000 h, OilQuick OQ 80 Fjdpfxjy Ib Tho Ad Nogb